[SOLVED] Borders on tint2, even when I have disabled it. (Openbox)

I have a problem with Openbox and tint2. I have added tint2 to my rc.xml file, where I specific tells it not to skin tint2. But somehow on a reboot it get skinned again. Even though I have set decor to yes or no. So I need to reconfigure for the setting to apply properly.
Anyone else experienced a similar problem?
Birger
Last edited by MindTooth (2008-11-18 14:00:33)

MindTooth wrote:
I have a problem with Openbox and tint2. I have added tint2 to my rc.xml file, where I specific tells it not to skin tint2. But somehow on a reboot it get skinned again. Even though I have set decor to yes or no. So I need to reconfigure for the setting to apply properly.
Anyone else experienced a similar problem?
Birger
I never got the tint2 package to work properly for some reason. Try this tint: http://aur.archlinux.org/packages.php?ID=17082
This one seemed to work fine for me - though I'm sure there must be an actual solution, if you get impatient give it a try.

Similar Messages

I love firefox 3.08 but when I install any improved versions they will not run on my desktop even when I have disabled all add ons and the firewall, can you help?

my system is Windows XP Media Center 2005 Hp model
I use Avast anti virus but have disabled it when loading firefox
I removed the Mcfee firewall which I thought might have stopped it running
I disabled all the add ons in case that was the problem
The internet explorer which I dont use as a browser has loaded up the inbox which ss very hard to remove
I have tried all the suggestions in the support section without success
please help as the message on the screen reads that the firefox version 3.08 is no longer secure.

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

How to solve this. It happens even when firewall is disabled. Apple TV: "Check that any firewall software running on this computer has been set to allow communication on port 3689" alert in Windows

How to fix this. Happens even when firewall is disabled. (Apple TV 1st generation)
Apple TV: "Check that any firewall software running on this computer has been set to allow communication on port 3689" alert in Windows

After a few hours the same issue started again. (Port 3689 error) I checked my router settings and it shows ATV asd connected to my netrwork. ATV also shows in iTunes devices. It asll works till I try to sync. Then the error pops up
I tired restoring ATV to factory settings. Even backed iTunes up to version 8 and every combonation therein. I started an older Gateway running Vista 64bit and it syncs fine with ATV although it's slow and I have to transfer movies from my Win 7 to tyhe Vista machiner.
I cannot find any reason for this issue. Can anybody solve this before it dribves me crazy? (Crazier)

Nokia E72 voice mail icon shows even when I have n...

I have a new Nokia E72 UK edition and am with Orange UK network.
The voice mail notification icon in my E72 always shows in the bottom right of the screen even when I have no voice mail, and have deleted all the messages. This is really annoying, especially as for a while it worked fine.
I tried disabling voice mail notifications, switching the phone on and off, then enabling them again but still no joy.

This is quite a common problem on orange UK. It's actually oranges fault.
Some of the following things have been known to clear the fault:
Placing the sim into another non-orange unlocked phone, then checking the voicemail. When put back into the orange phone the icon has gone.
Calling customer services and requesting an over-the-air sim update, this nearly always solves it.
Calling or visiting an orange store and getting the sim card replaced.
Message Edited by psychomania on 12-Jan-2010 02:18 PM

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?, Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?

Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

My iPhone 5 won't send texts without wifi, even when I have 4G. It also won't make calls. Any ideas?

Do you have a cellular plan with data and SMS activated?

WHY does the finder insist on rearranging the files in a folder in alphabetical order even when I have selected "none" in the preferences for file organization?

WHY does the finder insist on rearranging the files and/or documents in a folder in alphabetical order even when I have selected "none" in the preferences for file organization? Even after I numbered the documents/folders to keep them in my preferred order, it will still displace them occasionally. This is becoming increasingly frustrating!
Is this a "Pages" issue or "FInder"? The vast majority of documents I use are in Pages, but there are also Numbers, PDFs, jpegs and a few other applications involved. This never happened before I upgraded to Mountain Lion; in Tiger, the documents (mostly Appleworks) and files stayed where I wanted them to be.
I am visually oriented, and prefer to arrange items in a folder in an order that makes them easier for me to access, which is often NOT alphabetical.
Can anyone suggest a solution? Please??
Thank you.
Sara

nbar,
Thank you for your reply.
However, I do not understand what you mean by "user account." I am the only user, and can find no options for "user" or "guest." The parental controls have always been off, as there are no other people who have access to my computer.
Frank,
Thank you for your reply.
All my documents, files and folders are in icon view, Arranged By: none in both view and view options. This arbitrary rearranging does not happen all the time, only when I make a substantial change to one of the documents in the file or folder. I'm not sure what you mean by "column heading."
MichaelLAX,
Thank you for your reply.
I know, to my sorrow, that Appleworks does not work with Mountain Lion. I spent at least three months converting approximately 2,000 Appleworks documents to Pages, Numbers, Bento (for databases) and Touchdraw (for drawings). So this is not the problem; but as I said, I did not have this rearranging problem with Appleworks - the icons stayed where I wanted them to be. I still miss the ease and reliability of Appleworks, darn it!
Frank,
Thank you for your second reply.
I do have the Sort By: in view options as well as in view set to "none." The finder still insists on rearranging, but only when I have made a substantial change to a document in that file or folder.
Any futher thoughts?
xdab,
Thank you for your reply.
"Are you are using icon view, but for some reason the finder moves files around? is that the problem?"
YES!! This is exactly the problem.
"If this operation is successful then erase the original and rename the new one to the name originally chosen by the user."
This seems like a lot of trouble, especially as I often work on several documents at the same time.
"By the way, the finder has a "clean up by" menu that rearranges icons in one of the standard orders, there are shortcuts that produce the same effect, for example <option><cmd>1 sorts them by name. Is it possible that this shortcut was typed by mistake without you noticing?"
I do know about this "clean up by" option, and avoid it like the plague! So I doubt this is the issue, and I infrequently use keyboard shortcuts like this anyway.
Thanks all who replied. None of the suggestions seem to work, however. Any others out there?
Regards,
Sara

Latest Software of iOS 7.0.3 Wont install even when I have deleted all applications.I don't want to buy more memory

Latest Software of iOS 7.0.3 Wont install even when I have deleted all applications.I don't want to buy more memory as I have already done.

What model iPad and what iOS version is it currently running?
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
 Cheers, Tom

Sometimes when I open Calendar, it is blank even when I have entered appointments. What must I do?

Sometimes when I open Calendar, it is blank even when I have entered appointments. When this happens, I tap calendars and tap hide all calendars and then tap show all calendars and mt appointments appear. How do I get the Calendar app to show my appointments without going through this extra step? Thanks

Close All Open Apps... Perform a Reset... Try again...
Reset
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

Why can´t I use inport VI in win xp even when I have used userport aplication?

why can´t I use inport VI in win xp even when I have used userport aplication for enabling port reading in this plattform?, I´m getting data from the parallel port in epp mode, my pc´s pararell is ok bcs I can read data in c++

If you have an older LabVIEW (6.1 or earlier) you will need to exchange the in port and out port VIs that came with LabVIEW with different ones and install a DLL. The reason is documented here . This link (which is the first link returned when you search ni.com for "in port") explains basically that the OS won't let you until you have kernel level access. The devzone link at the bottom of the refered page will include all of the code that you need to install (VIs and DLL) to make it work.
>
Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
DISTek Integration, Inc. - NI Alliance Member
mailto:[email protected]

My iPod show that my battery is receiving energy and that it is "charging," but it doesn't actually charge. The battery never increases; it only decreases. Even when I have it physically plugged in and charging, it loses battery whenever I am using an APp

My iPod shows that my battery is receiving energy and that it is "charging," but it doesn't actually charge. The battery never increases; it only decreases. Even when I have it physically plugged in and charging, it loses battery whenever I am using an APP or anything. I'm thinking that the chip that receives the energy is damaged or worn out. Is there anyway to fix it without going to the store? My USB chords is fine. It charges other iPods fine. Including a second generation iPod which means my 4th generation iPod should not have an physical battery problem. Any suggestions? Thank you so much!

- See:
iPod touch: Hardware troubleshooting
- Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button together while being plugged into the computer. What do I do?

I was on the phone last night and my phone randomly turned off. It will not come back on even when I have tried to hold the home button and the power button at the same time, while being plugged into the computer? What do I do?

Plug it into power for at least 15 minutes. If it doesn't automatically come on, try a reset... press the home and sleep (on/off) buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Even when i have updated version of adobe flash player, some sites do not play video

Hi,
Even when i have updated version of adobe flash player and active x from adobe.com, some sites do not play the video. A request box, install the plug in comes. When i click it, it again tries to install the same version of adobe, which i have already downloaded. it is only for some sites.
May be it is because, it is site problem? How to overcome it

ActiveX is part of the Windows operating system. Plus the ActiveX version of Adobe Flash is for Internet Explorer. Other browsers need their own version of Flash' Firefox needs the Plugin version of Flash.
If you go to the Adobe website to download Flash while using Firefox, Adobe will provide the correct version of Flash automatically. Just make sure you de-select any other programs that Adobe may want to stick you with before you actually download Flash. Then close Firefox and run the Adobe Flash installer.

Why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant

why does adobe premier elements render my video everytime i change something in it even when i have lots more of the video to edit? other editing software only seems to render at the start then lets you edit until your ready to save at the end. Constant rendering means its almost impossible to edit anything. Please help.

H TheGamer
What version of Premiere Elements and on what computer operating system is it running? It will not influence my answer but will give me information in case I need to get into version specifics to detail my answer further.
Timeline rendering is a preview matter. It does not fix anything, but it is your window of opportunity to catch of problem sooner than latter. If the Timeline rendering indicator displays orange (11 or higher) for the line above the Timeline content, that is the project telling you that you are not getting the best possible preview of the playback of that content in the Edit area monitor. And, every time you edit a file, you have altered the file from the time before. So, if you want to see the best possible for what you now have, you Timeline render. This is particularly helpful when you are dealing with titles, effects, transitions, and non native formats. You cannot turn off the Timeline render indicator system, at least none that I have ever found nor seen reported. You can do selective Timeline rendering by having the gray tabs of the Work Area Bar span only the Timeline segment that you want Timeline rendered.
Consequently, you either ignore the Timeline render indicator system, move on in the project, and take your chances in the outcome or you Timeline render to get your best possible preview if the Timeline render indicator is suggesting that you do so.
I am not approving or disapproving of this project feature, just commenting on the what is.
This is not Adobe. Rather user to user. If you want to have your voice heard at Adobe, you might consider filing an Adobe Feature Request Bug Report Form.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Please consider.
ATR
Add On...it is also possible to do Timeline rendering in a project, save close the project, and reopen it to find your previously "green" lined content now "orange", indicating unrendered. Yet the preview files generated originally by Timeline rendering are still existing in their hard drive save location. That is another story for other time.

My MacPro shuts down even when I have 50% battery power?

My MacPro shuts down even when I have 50% battery power?

My MacPro shuts down even when I have 50% battery power?

[SOLVED] Borders on tint2, even when I have disabled it. (Openbox)

Similar Messages

Maybe you are looking for