[SOLVED] brother dcp7030 & cups : error when printing

Hello,
I have a brother dcp7030 and thanks to package brother-dcp7030 in aur, I've been able to use it until yesterday.
When I try to print, I get this in /var/log/cups/error_log :
D [04/Jul/2010:10:36:14 +0200] cupsdSetBusyState: Printing jobs
D [04/Jul/2010:10:36:19 +0200] [Job 287] usb_find_busses=0
D [04/Jul/2010:10:36:19 +0200] [Job 287] usb_find_devices=0
D [04/Jul/2010:10:36:19 +0200] [Job 287] STATE: +connecting-to-device
D [04/Jul/2010:10:36:19 +0200] [Job 287] Failed to set configuration 1 for 04f9:01ea
D [04/Jul/2010:10:36:19 +0200] [Job 287] Failed to claim interface 0 for 04f9:01ea: Operation not permitted
D [04/Jul/2010:10:36:19 +0200] [Job 287] STATE: -connecting-to-device
I [04/Jul/2010:10:36:19 +0200] [Job 287] Waiting for printer to become available...
D [04/Jul/2010:10:36:19 +0200] cupsdMarkDirty(-----S)
D [04/Jul/2010:10:36:19 +0200] cupsdSetBusyState: Printing jobs and dirty files
D [04/Jul/2010:10:36:24 +0200] [Job 287] usb_find_busses=0
D [04/Jul/2010:10:36:24 +0200] [Job 287] usb_find_devices=0
D [04/Jul/2010:10:36:24 +0200] [Job 287] STATE: +connecting-to-device
D [04/Jul/2010:10:36:24 +0200] [Job 287] Failed to set configuration 1 for 04f9:01ea
D [04/Jul/2010:10:36:24 +0200] [Job 287] Failed to claim interface 0 for 04f9:01ea: Operation not permitted
D [04/Jul/2010:10:36:24 +0200] [Job 287] STATE: -connecting-to-device
I [04/Jul/2010:10:36:24 +0200] [Job 287] Waiting for printer to become available...
D [04/Jul/2010:10:36:24 +0200] cupsdMarkDirty(-----S)
I also sometimes get this error in /var/log/kernel.log, bt not systematically :
Jul 4 10:13:54 miniacer kernel: brcupsconfig3[4249]: segfault at 2d373333 ip 00000000f76224f8 sp 00000000ffc63b94 error 6 in libc-2.12.so[f75ae000+145000]
The configuration for this printer worked, so the following elements were configured :
- usblp not loaded
- following udev rules set :
ACTION=="add", SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ID_USB_INTERFACES="04f9:01ea", GROUP="lp", MODE="666"
SUBSYSTEM=="usb",ATTRS{idVendor}=="04f9",ATTRS{idProduct}=="01ea",MODE="0666",GROUP="lp",SYMLINK+="scanner"
ACTION=="add", ATTR{idVendor}=="04f9", GOTO="brscan3"
GOTO="brscan3_end"
LABEL="brscan3"
ATTR{idProduct}=="0206", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0204", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0205", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0201", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0200", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01ff", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01fe", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01fd", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01fb", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01fa", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f9", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f8", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f7", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f6", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f5", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f4", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f1", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f3", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f2", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01f0", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01ef", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0207", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0208", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0203", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0202", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01fc", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01ee", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01ed", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01eb", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01ea", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01e9", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01e8", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01e7", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01e6", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="01e5", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0218", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="021f", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0217", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0216", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
ATTR{idProduct}=="0215", MODE="0664", GROUP="scanner", SYMLINK+="scanner%n"
LABEL="brscan3_end"
This seems to be taken in account as demonstrated that way :
# lsusb
Bus 002 Device 005: ID 04f9:01ea Brother Industries, Ltd
# ls -l /dev/bus/usb/002/
total 0
crw-rw-rw- 1 root lp 189, 128 Jul 4 2010 001
crw-rw-rw- 1 root lp 189, 129 Jul 4 2010 002
crw-rw-rw- 1 root lp 189, 130 Jul 4 2010 003
crw-rw-r-- 1 root scanner 189, 132 Jul 4 10:27 005
Putting udev in debug mode gives this when plugging the printer :
Jul 4 10:27:53 miniacer udevd[798]: seq 1392 queued, 'add' 'usb'
Jul 4 10:27:53 miniacer udevd[798]: passed 283 bytes to netlink monitor 0x1b61230
Jul 4 10:27:53 miniacer udevd-work[3588]: seq 1392 running
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b71190 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2/2-3'
Jul 4 10:27:53 miniacer udevd-work[3588]: LINK 'char/189:132' /lib/udev/rules.d/50-udev-default.rules:4
Jul 4 10:27:53 miniacer udevd-work[3588]: MODE 0664 /lib/udev/rules.d/50-udev-default.rules:59
Jul 4 10:27:53 miniacer udevd-work[3588]: IMPORT 'usb_id --export /devices/pci0000:00/0000:00:0b.0/usb2/2-3' /lib/udev/rules.d/50-udev-default.rules:70
Jul 4 10:27:53 miniacer udevd-work[3588]: 'usb_id --export /devices/pci0000:00/0000:00:0b.0/usb2/2-3' started
Jul 4 10:27:53 miniacer usb_id[4450]: custom logging function 0x1387010 registered
Jul 4 10:27:53 miniacer udevd[798]: seq 1393 queued, 'add' 'usb'
Jul 4 10:27:53 miniacer udevd[798]: seq 1394 queued, 'add' 'usb'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_VENDOR=04f9'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_VENDOR_ENC=04f9'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_VENDOR_ID=04f9'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_MODEL=01ea'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_MODEL_ENC=01ea'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_MODEL_ID=01ea'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_REVISION=0100'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_SERIAL=04f9_01ea_000E8N257201'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_SERIAL_SHORT=000E8N257201'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_BUS=usb'
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/usb_id' (stdout) 'ID_USB_INTERFACES=:070102:ffffff:'
Jul 4 10:27:53 miniacer udevd-work[3588]: 'usb_id --export /devices/pci0000:00/0000:00:0b.0/usb2/2-3' returned with exitcode 0
Jul 4 10:27:53 miniacer udevd-work[3588]: GROUP 7 /lib/udev/rules.d/50-udev-default.rules:71
Jul 4 10:27:53 miniacer udevd-work[3588]: MODE 0664 /lib/udev/rules.d/50-udev-default.rules:71
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b71480 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2'
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b64fc0 has devpath '/devices/pci0000:00/0000:00:0b.0'
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b65290 has devpath '/devices/pci0000:00'
Jul 4 10:27:53 miniacer udevd-work[3588]: RUN 'socket:@/org/freedesktop/hal/udev_event' /lib/udev/rules.d/90-hal.rules:2
Jul 4 10:27:53 miniacer udevd-work[3588]: GROUP 7 /etc/udev/rules.d/98-libsane.rules:4
Jul 4 10:27:53 miniacer udevd-work[3588]: MODE 0666 /etc/udev/rules.d/98-libsane.rules:4
Jul 4 10:27:53 miniacer udevd-work[3588]: LINK 'scanner' /etc/udev/rules.d/98-libsane.rules:4
Jul 4 10:27:53 miniacer udevd-work[3588]: GROUP 7 /etc/udev/rules.d/98-usblp.rules:1
Jul 4 10:27:53 miniacer udevd-work[3588]: MODE 0666 /etc/udev/rules.d/98-usblp.rules:1
Jul 4 10:27:53 miniacer udevd-work[3588]: GROUP 96 /etc/udev/rules.d/brscan3.rules:33
Jul 4 10:27:53 miniacer udevd-work[3588]: MODE 0664 /etc/udev/rules.d/brscan3.rules:33
Jul 4 10:27:53 miniacer udevd-work[3588]: LINK 'scanner3' /etc/udev/rules.d/brscan3.rules:33
Jul 4 10:27:53 miniacer udevd-work[3588]: no node name set, will use kernel supplied name 'bus/usb/002/005'
Jul 4 10:27:53 miniacer udevd-work[3588]: created db file for '/devices/pci0000:00/0000:00:0b.0/usb2/2-3' in '/dev/.udev/db/usb:2-3'
Jul 4 10:27:53 miniacer udevd-work[3588]: creating device node '/dev/bus/usb/002/005', devnum=189:132, mode=0664, uid=0, gid=96
Jul 4 10:27:53 miniacer udevd-work[3588]: preserve file '/dev/bus/usb/002/005', because it has correct dev_t
Jul 4 10:27:53 miniacer udevd-work[3588]: set permissions /dev/bus/usb/002/005, 020664, uid=0, gid=96
Jul 4 10:27:53 miniacer udevd-work[3588]: creating symlink '/dev/char/189:132' to '../bus/usb/002/005'
Jul 4 10:27:53 miniacer udevd-work[3588]: creating link '/dev/scanner' to '/dev/bus/usb/002/005'
Jul 4 10:27:53 miniacer udevd-work[3588]: creating symlink '/dev/scanner' to 'bus/usb/002/005'
Jul 4 10:27:53 miniacer udevd-work[3588]: creating link '/dev/scanner3' to '/dev/bus/usb/002/005'
Jul 4 10:27:53 miniacer udevd-work[3588]: creating symlink '/dev/scanner3' to 'bus/usb/002/005'
Jul 4 10:27:53 miniacer udevd[798]: seq 1392 done with 0
Jul 4 10:27:53 miniacer udevd[798]: passed 299 bytes to netlink monitor 0x1b61230
Jul 4 10:27:53 miniacer udevd[798]: passed 305 bytes to netlink monitor 0x1b61230
Jul 4 10:27:53 miniacer udevd-work[3588]: passed 573 bytes to socket monitor 0x1b71190
Jul 4 10:27:53 miniacer udevd-work[3588]: passed -1 bytes to netlink monitor 0x1b70fe0
Jul 4 10:27:53 miniacer udevd-work[3588]: seq 1392 processed with 0
Jul 4 10:27:53 miniacer udevd-work[3588]: seq 1393 running
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b611a0 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0'
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b653a0 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2/2-3'
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b61980 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2'
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b71150 has devpath '/devices/pci0000:00/0000:00:0b.0'
Jul 4 10:27:53 miniacer udevd-work[3588]: device 0x1b719c0 has devpath '/devices/pci0000:00'
Jul 4 10:27:53 miniacer udevd-work[3588]: RUN '/lib/udev/load-modules.sh $env{MODALIAS}' /lib/udev/rules.d/80-drivers.rules:5
Jul 4 10:27:53 miniacer udevd-work[3677]: seq 1394 running
Jul 4 10:27:53 miniacer udevd-work[3677]: device 0x1b6ff80 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1'
Jul 4 10:27:53 miniacer udevd-work[3588]: RUN 'socket:@/org/freedesktop/hal/udev_event' /lib/udev/rules.d/90-hal.rules:2
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/load-modules.sh usb:v04F9p01EAd0100dc00dsc00dp00ic07isc01ip02' started
Jul 4 10:27:53 miniacer udevd-work[3677]: device 0x1b61380 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2/2-3'
Jul 4 10:27:53 miniacer udevd-work[3677]: device 0x1b705c0 has devpath '/devices/pci0000:00/0000:00:0b.0/usb2'
Jul 4 10:27:53 miniacer udevd-work[3677]: device 0x1b708e0 has devpath '/devices/pci0000:00/0000:00:0b.0'
Jul 4 10:27:53 miniacer udevd-work[3677]: device 0x1b70bf0 has devpath '/devices/pci0000:00'
Jul 4 10:27:53 miniacer udevd-work[3677]: RUN '/lib/udev/load-modules.sh $env{MODALIAS}' /lib/udev/rules.d/80-drivers.rules:5
Jul 4 10:27:53 miniacer udevd-work[3677]: RUN 'socket:@/org/freedesktop/hal/udev_event' /lib/udev/rules.d/90-hal.rules:2
Jul 4 10:27:53 miniacer udevd-work[3677]: '/lib/udev/load-modules.sh usb:v04F9p01EAd0100dc00dsc00dp00icFFiscFFipFF' started
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/load-modules.sh' (stderr) 'WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.'
Jul 4 10:27:53 miniacer udevd-work[3677]: '/lib/udev/load-modules.sh' (stderr) 'WARNING: All config files need .conf: /etc/modprobe.d/sound, it will be ignored in a future release.'
Jul 4 10:27:53 miniacer udevd-work[3677]: '/lib/udev/load-modules.sh usb:v04F9p01EAd0100dc00dsc00dp00icFFiscFFipFF' returned with exitcode 0
Jul 4 10:27:53 miniacer udevd-work[3677]: passed 319 bytes to socket monitor 0x1b70200
Jul 4 10:27:53 miniacer udevd-work[3677]: passed -1 bytes to netlink monitor 0x1b6feb0
Jul 4 10:27:53 miniacer udevd-work[3677]: seq 1394 processed with 0
Jul 4 10:27:53 miniacer udevd[798]: seq 1394 done with 0
Jul 4 10:27:53 miniacer udevd-work[3588]: '/lib/udev/load-modules.sh usb:v04F9p01EAd0100dc00dsc00dp00ic07isc01ip02' returned with exitcode 0
Jul 4 10:27:53 miniacer udevd-work[3588]: passed 313 bytes to socket monitor 0x1b651a0
Jul 4 10:27:53 miniacer udevd-work[3588]: passed -1 bytes to netlink monitor 0x1b70fe0
Jul 4 10:27:53 miniacer udevd-work[3588]: seq 1393 processed with 0
Jul 4 10:27:53 miniacer udevd[798]: seq 1393 done with 0
Would anybody have an idea about what to do ?
Thanks,
Mikael
Last edited by artturi (2010-07-10 08:57:29)

Yes, that was what I thought but :
# ps aux|grep cups
root 3580 0.0 0.2 76040 4328 ? Ss 20:47 0:00 /usr/sbin/cupsd -C /etc/cups/cupsd.conf
daemon 3583 0.0 0.0 15348 1724 ? S 20:47 0:00 /bin/sh /usr/lib/cups/filter/brlpdwrapperDCP7030 289 mikael Travaux-SE.pdf 1 noCollate finishings=3 media=A4 number-up=1 outputorder=normal portrait Resolution=300dpi sides=one-sided TonerSaveMode=On job-uuid=urn:uuid:8a61adbc-8b9d-3baf-5fb9-d42ca53acf90 job-originating-host-name=localhost
I thought about changing rights via udev (666 instead of 660) but that did not help...
I also tried "mount -t usbfs none /proc/bus/usb" and restarted cups : not better...
Regards,
Mikael

Similar Messages

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome

HP LASERJET CP1525nw print error when printing online Gmail emails with Google Chrome. Extra large font sizes and weird formatting issues only when printing emails from Gmail within Chrome. No problems when printing the same email from Gmail+Internet Exolorer or Thunderbird. Using the IE Tab extension in Chrome prints the email correctly but the style of Gmail's message window is completely weird ie: formatting bar is spread out vertically instead of horizontally. I believe it is clear that this is an application specific issue between the HP LASERJET CP1525nw printer and Google Chrome + Gmail. This printing scenario does not occur when printing anything else or when printing via another printer. I would appreciate receiving any suggestions to solve this issue.
OS: Windows 7 Ultimate x64
Browser: Google Chrome 15
HP Print driver: HP Universal Print Driver for Windows PCL6 v5.4.0
Printer is connected by WiFi to 4 computers

Hi AbZu,
You need to contact Google Chromes technical support as this is only an issue with Chrome. You have indicated that the printer functions correctly everywhere else. Check out the link below for Google Chrome technical support. Let me know if you need additional assistance?
http://support.google.com/chrome/?hl=en
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Error when printing reports from forms in Linux

Im having an error when printing a report from a form. The problem is, only with certain forms. when printing a report (to PDF) from other forms, it prints with no problems. The oracle is 10g AS and operating system is Redhat AS 3.
The error, in the log from the reports server is:
[2004/9/7 7:14:59:599] Exception 62204 (): Internal error writing the image BandCombine: a row of the matrix does not have the correct number o
f entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=62204,
java.lang.String errorString="Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, sh
ould be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..",
java.lang.String moduleName="REP"
at oracle.reports.utility.Utility.newRWException(Utility.java:604)
at oracle.reports.toolkit.image.writer.JPEGImageWriter.writeImage(JPEGImageWriter.java:130)
at oracle.reports.toolkit.image.ImageManager.writeJPEGImage(ImageManager.java:524)
at oracle.reports.engine.EngineImpl.CRunReport(Native Method)
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:353)
at oracle.reports.engine.EngineClassPOATie.run(EngineClassPOATie.java:84)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:117)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:62)
at com.inprise.vbroker.poa.POAImpl.invoke(POAImpl.java:2355)
at com.inprise.vbroker.poa.ActivationRecord.invoke(ActivationRecord.java:104)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.doRequest(GiopProtocolAdapter.java:492)
at com.inprise.vbroker.IIOP.ServerProtocolAdapter.doRequest(ServerProtocolAdapter.java:64)
at com.inprise.vbroker.GIOP.GiopProtocolAdapter.dispatchMessage(GiopProtocolAdapter.java:653)
at com.inprise.vbroker.orb.TPDispatcherImpl$TPDispatcher.run(TPDispatcherImpl.java:99)
at com.inprise.vbroker.orb.ThreadPool$PoolWorker.run(ThreadPool.java:76)
[2004/9/7 7:14:59:599] Error 50103 (C Engine): 19:14:59 ERR REP-0069: Internal error
REP-62204: Internal error writing the image BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.get
ExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1..
[2004/9/7 7:14:59:600] Error 50103 (C Engine): Error Writing Image, ID 2
[2004/9/7 7:14:59:601] Error 50103 (rwtic:rwticga): Look up for image attributes for image 2
[2004/9/7 7:14:59:602] Error 50103 (rwtic:rwticgi): Looking up for Image, ID 2 in the cache
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Loading the Image into the cache
[2004/9/7 7:14:59:603] Debug 50103 (ImageManager:getImageSource): Retrieving the Image object for ID : 2
[2004/9/7 7:14:59:603] Error 50103 (rwtic:rwticgi): Image successfully loaded into the cache
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageHeight ): Start Height : 155
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageWidth ): Start : width : 138
[2004/9/7 7:14:59:604] Debug 50103 (ImageSource:getImageColorSpace ): Start
[2004/9/7 7:14:59:608] Exception 50125 (): Caught exception: java.lang.NullPointerException
exception oracle.reports.RWException {
oracle.reports.RWError[] errorChain={struct oracle.reports.RWError {
int errorCode=50125,
If anyone could help me, is important !
Thx in advance
Bruno Santos

Raise a TAR I reckon

HP Sprout error when printing with PowerDriver from Sawgrass

HI, i am getting an error when i try to print a project from the Sprout Workplace with the PowerDriver v4 software from Sawgrass. Any info/guidance is greatly appreciated. Thanks!!

My workaround by using a virtual PDF printer isn't as good as I hoped. If the files generated by printing with flashplayer exceed about 3 pages the temp file generated in /var/spool/cups is so big that it exceeds my partitions size.
The file can get up to more than 1GB. With documents from one or two pages the temp file is about 500MB, the correct pdf gets generated after that and is placed under /var/spool/cups-pdf/<user> and is about 500kb small. The very big temp file get's deleted after that.
Why is this temp file so big and how can I avoid it getting so big?
Last edited by @op (2011-09-01 20:30:30)

PhotoShop CS2 "Program Error" when printing

I am posting this to the Adobe Forums as well, but thought someone here might have some ideas. am having an intermittent problem printing from PhotoShop CS2 to an Epson 9800. When printing large files (200 MB average) to the Epson, PhotoShop will spool the job, taking about 50% longer than normal, and when complete, displays the following message..."The file XXXX.tif could not be printed because of a program error" No job ever gets to the print que. This happens about 80% of the time when printing. Quitting and restarting PhotoShop generally fixes the problem, and the file can be printed from another computer without issue, so this is not file specific. I have 8GB of RAM installed and PhotoShop running under 100% available memory, cache level at 8, with a dedicated 180GB scratch disk. Memory should NOT be the problem, though I do often have the full layered version of the file open in the background (I am printing from a flattened copy. I have observed that the problem is less likely to occur if no other files are open. I have a second G5 with the exact same software setup (OS, Print Driver and PhotoShop down to the decimal version #) that works perfectly every time. I have run all of the System utilities (Repair Permissions, FSCK, etc), reset the OSX printing system, reset PS preferences, trashed and re installed CS, as well as the Epson printer driver, all with no success. Any other trouble shooting ideas would be greatly appreciated. I would love to avoid a System reinstall.

See the Adobe Knowledge Base document"Error 'Could not complete your request...' or 'Could not create a new document...' (Photoshop CS2 on Mac OS X v10.4)"
I suggest whenever you have problems with third-party applications, the first place to start troubleshooting is with the application's documentation, then vendor's web site. Usually their sites have FAQs, lists of known bugs, or application-specific forums similar to these Discussions. Sometimes, unlike the Apple Discussions, the questions are even answered by employees of the vendor.
The document cited above was found in 10 seconds by searching the Adobe support site.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

0x80004005 error when printing SSRS rdlc report

Hi there
I have a small app that is published in MS azure with RDLC integrated reports.
The application runs using IE and the system asks me to install the SQL Server Report Service 2012 add-in.
I added with no issues but I am getting a 0x80004005 error when I am trying to print a report.
I have followed the advise on this issue but I still have the same problem.
I have unregistered and deleted the dlls from windows\downloaded Program files subdirectory, copy the dlls into the same directory registered the dlls to no avail.
Any advise from anyone?
Thanks in advance for the help
Rio

Hi Rio,
The issue may be caused by incorrect session state provide for report view and need to use Azure Cache.
Please make sure report viewer control works efficiently without any session related issue. We will need to configure session state provider using Azure cache.
Reference:
http://msdn.microsoft.com/en-us/library/windowsazure/hh825825.aspx
http://msdn.microsoft.com/en-us/library/windowsazure/gg278339.aspx
We pretty much need first create an Azure Shared Cache namespace, then copy the configure property for our cache namespace to our web.config file.
Regards,
Alisa Tang
If you have any feedback on our support, please click
here.
Alisa Tang
TechNet Community Support

Photoshop CS5: error when printing to Xerox Phaser 7750

Mac 10.6.5
I get the following error when I print directly to my Xerox Phaser 7750 from Photoshop CS5:
"Error: /Library/Printers/Xerox/Filters/pstophaserps failed"
All the other CS5 apps (plus Photoshop CS4) have no trouble printing.
Thanks in advance for any assistance.

Something doesn't add up since PS CS4 works ok. What's different about CS5? 64bit?
My guess would be that Photoshop is the only app you use that prints PostScript through the Cocoa drivers, and thus the only one hitting that particular part of the driver software.
>

Error when print out SAP Crystal Report in SAP B1

Dear all,
I have encountered the following message when I tried to print out SAP Crystal Report at client pc:
Could not load file or assembly 'CrystalDecision.Windows.Forms, Version = 12.0.2000.0, Culture=neutral, Publickey Token=692fbea5521e1304' or one of its dependencies. The system cannot find the file specified.
On the other hand, there's no error when I print out the SAP Crystal Report on server.
Can anyone advice on the error message as above?
Thanks alot.

Hi All,
I have SAP 2007 B,Visual Studio 2008 and Crystal report 2008 Add-on. I am facing the same problem,
"Could not load file or assembly 'CrystalDecision.Windows.form,Version=12.0.2000.0, Culture=neutral,Publickey Token =692fbea5521e1304' or one of its dependencies. The system can not find the file specified."
I have uninstalled SAP B1 and Crystal report 2008. Still I am getting the same Error message. Kindly give me your suggestions.
Regards,
Tom.

Photoshop Application Errors when printing to Zebra Card Printer

Hello,
I have been troubleshooting and issue for a user and I have run into a wall.
When printing from Photoshop CS3(Version 10.0.1) to a brand new Zebra ZXP Series 3 card printer in Windows 7 32 bit I am getting this: errors:
I went from an XP machine to Windows 7(with a video card plenty of memory) and still the same errors. I updated the Zebra printer drivers and firmware. I can test print from the PC just fine. I even tried CS4 with the same result. The user purchased a license for CS3 so I am troubleshooting with CS3 at this moment. My user is way behind in printing id badges for his Fireman and needs this resolved ASAP. I may have to go with Zebra's Card Studio Software if there is no resolution for this Photoshop issue.
Any help at this point would be greatly appreciated!
Thank you,
Ben Collier

Zebra Level 2 Support is looking into it for me. Thanks for nothing Adobe!

CL_RSRD_PRODUCER_PRECALC Error when Printing using Info Broadcasting

Hi,
I get the following error when trying to print from the Portal using Information Broadcasting - CL_RSRD_PRODUCER_PRECALC, type PROD. I am trying to print using PS or PCL not PDF.
We are running SPS12. The printer is setup in BW and tested. All other connections between Portal and BW appear to be working.
Any ideas?
Thanks,

Thanks, but that note applies to Patch 8 and as mentioned we are running SPS12.
Basically what happens is we get a blank browser window for some time then the error returns as mentioned in my original post.

CS3 Postscript errors when printing MathType eq's

When printing documents in CS3 that contain placed EPS files that were created with MathType I get a PostScript error. The same EPS files print fine to the same printer from CS2.
Has anyone had a similar experience or know of a solution?
Thanks,
Phil

Phil,
I have also had the same problem with MathType equations in ID CS3. Similar to what you said, it printed fine out of ID CS2. I found that exporting my document as a PDF and then printing that worked fine (and that way the equations are all still editable). However, I'm unhappy with that solution because many of my commercial print providers specifically request that I print to postscript and distill. I know Adobe has assured us that using the Export function is perfectly legitimate and should meet all the needs of commercial print providers, but I'm not sold. Plus it's annoying to have to make a PDF and print that every time I want to print a document.
As an aside, I work on a Mac G5 and use LinoType FontExplorer for my font management. Is this problem limited to Mac, or does it happen on a PC also?
In trying to track down the root of the problem, my step were this:
I completely wiped my system of all but the necessary system fonts, uninstalled MathType, and restarted. I reinstalled MathType 5.1 for Mac. It automatically installs TrueType fonts, so I remade one of my problematic equations in MathType with the TrueType fonts. It used Symbol, MT Extra, and Times. I made a hardcopy printout from MathType - no problem.
I imported the new MathType equation into a new document in ID CS3. I printed to a postscript file, using "PPD: Device Independent" (which should take care of any individual printer finickiness). The .ps printed fine, but I got "[ Error: typecheck; OffendingCommand: makefont ]" when I distilled it (I've been using my Distiller settings in a professional book publishing environment for the past 8 months without issue).
Next I permanently deleted the TrueType fonts and installed the Postscript fonts that MathType provides, following the instructions that come with the program on how to do this. I restarted again, and replicated my previous test. Same outcome.
I opened the equation in Illustrator, and saved it as an .eps. Obviously this isn't ideal because it destroys MathType's editability on it, but this was just to test a theory. I imported the Illustrator equation into ID CS3 (with fonts embedded), and it printed to .ps and distilled fine. Because of this, I think your observation that ID CS3 isn't downloading the necessary fonts for the equations (which you point out can't be embedded in MathType) is correct.
Thoughts? I'd love to get to the bottom of this if anyone has any more insight.
Thanks,
Virginia

PIXMA MG3220 Error when printing pdf

I get a "Status" = "Error" when i try to print Adobe PDF files. I get the error from either Adobe Reader or Safari (or any other App that lets me open a pdf). I can print pdf files via "Preview" however.
OSX 10.7.5
Intel Core 2 Duo 2.4 GHz

Hi taylorce,
So we can better assist you, please reply with the following information:
1. Are the PDF files that you are unable to print all being printed from an online source directly, or are they also PDF files that are saved on your computer? If from an online source, if you download the files and save them to your computer, are you able to print them successfully?
2. Have you tried installing the latest version of Adobe Reader to see if this will resolve the issue?
We look forward to hearing from you!
If this is a time-sensitive matter, additional support options are available at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Epson Artisan 810 gives error when prints from 10.6.2

I know that Epson update 2.2 was released for 10.6.1. But it doesn't seem to help when printing from any application with 10.6.2. Should I downgrade back to 10.6.1? I have an Artisan 810 that won't print from 10.6.1 on a MacBook Pro that came out in September of 2009. It will print a sample page from the utility, and run the print head cleaning utilities, but won't print a document. It makes some indication that it can't deal with a postscript file in the error in the print queue the moment I send a print job from Neo Office or Safari. I'm connected via USB. Eventually I'd like to figure out how to add it to my Time Capsule's 802.11n network if possible. But first let's get it working under USB.

I just went through this and seriously considered publishing the directions so I reckon this is my chance.
When all was said and done, I only used the Epson utility to remove all of the installed Epson software, did not use any drivers as provided by them, including the already installed Photo R280 drivers for my other printer, and started over.
Once done, I used the OSX Print & Fax System Preference to install the 810 as a new printer and let Software Update do its thing. It seems to load and install everything needed to make the thing work. Most of the Epson stuff seems useless and I find that the OSX Image Capture utility does a great job of running the scanner part.
The most important thing I learned is that the directions and utilities as provided by Epson are not very helpful. The network setup utility they provide doesn't work at all on a Mac and looks exactly like the Windows XP version. I got very frustrated and simply accessed the menus myself on the 810's control panel and joined it with the wireless network manually. It was way easier and less frustrating then trying to get the Epson junkware working.
As an aside, there are a kajillion little plastic thingies that can break and cause problems in this thing. Make sure to register it and get the free extended warranty
Other than the installation pains this has turned out to be a pretty incredible little device. I already have a great scanner and an adequate photo printer, but I needed a fax modem, and for about the same price as the modem I ended up with a lot of other functionality as well.
You can always page me in the lounge if you need any further input.
-DP

Error when print/previewing joutnal report

I am gettign the following error when trying to view a journal report PLEASE HELP!
Can't open the log file
Show Details:
Error Reference Number: {CAC41EC9-7F12-46FA-A900-EB5E57E802D8}
Num: 0x800456c2;Type: 0;DTime: 10/6/2011 11:03:14 AM;Svr: POCHFM02;File: HFMActions.cpp;Line: 72;Ver: 11.1.2.1.000.3082;
Num: 0x800456c2;Type: 0;DTime: 10/6/2011 11:03:14 AM;Svr: POCHFM02;File: HFMCESAction.cpp;Line: 28;Ver: 11.1.2.1.000.3082;
Num: 0x800456c2;Type: 0;DTime: 10/6/2011 11:03:14 AM;Svr: POCHFM02;File: Actions.cpp;Line: 385;Ver: 11.1.2.1.000.3082;

Hi,
How the issue was fixed, it would be great if you can provide the resolution steps.
It seems i'm too getting the same issue, when i'm trying to open a HFM report in workspace the report prompts to select a member but when i'm clicking the prompt button then it is throwing the error.Error is as below
Respond to prompts
*[1033] Native:- 2147219967 error reference number {FF339D8B-E1CC-4E57-9D4A-C4EF051D76B6}*
NUM:080040601;Type: 1 ; DTime:5/9/12 5:41:34 AM ; Svr:server name; File: CHsvADMDriverACM2.cpp;Line:2500;Ver:11.1.1.3.500.3124*
NUM:080040601;Type: 1 ; DTime:5/9/12 5:41:34 AM ; Svr:server name; File: HsvALEQueryClasses.cpp;Line:1491;Ver:11.1.1.3.500.3124*
NUM:080040601;Type: 1 ; DTime:5/9/12 5:41:34 AM ; Svr:server name; File: HsvALEQueryClasses.cpp;Line:707;Ver:11.1.1.3.500.3124*
NUM:080040601;Type: 1 ; DTime:5/9/12 5:41:34 AM ; Svr:server name; File: HsvALEQueryClasses.cpp;Line:804;Ver:11.1.1.3.500.3124*
NUM:080040601;Type: 1 ; DTime:5/9/12 5:41:34 AM ; Svr:server name; File: HsvALEQueryClasses.cpp;Line:1245;Ver:11.1.1.3.500.3124*
HsvALEQueryClasses.cpp;Line:707;Ver:11.1.1.3.500.3124
NUM:080040601;Type: 1 ; DTime:5/9/12 5:41:34 AM ; Svr:server name; File: HsvALEQueryClasses.cpp;Line:804;Ver:11.1.1.3.500.3124*
NUM:080040601;Type: 1 ; DTime:5/9/12 5:41:34 AM ; Svr:server name; File: HsvALEQueryClasses.cpp;Line:1203;Ver:11.1.1.3.500.3124*

[Solved]500 Internal Server Error- when open dialog page for LOV

Hello
I have developed JSF / ADF Bc application and my form has inputselect component and everything works fine in embeded OC4J, but when i deploy the application to apps server i get below error when i launch the dialog page to select a value
500 Internal Server Error
Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.
Please help
Thanks
Message was edited by:
user570961

Frank
unfortunately nothing is reported in the log file , please see the bottom of the message to see what's in the log file
this is all i see in the log and this is added to log when the page is loaded before i try to launch my dialog page and nothing else is added to the error i am getting. and in IE it just says page cannot be displayed and firefox reports the 500 Internal server error with the message i posted in original post
we have QA server and there i deployed the application from jdeveloper and it works Okay , but for production , production services team deployed the application using the EAR file i am giving to them and i am getting this error. ( I am providing them with the EAR file generated when i deploy the application to QA from jdeveloper)
I thought i try to deploy this to QA from ear file to see if i can reproduce the problem , so undeployed my application and tried to deploy using ear file in qa, but it never goes to step 2. it hangs on the screen uploading file ..... it never completes uploading and it does not fail with error either
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null)
Oct 2, 2007 9:03:50 PM com.sun.faces.config.rules.ConverterRule end

[SOLVED] brother dcp7030 & cups : error when printing

Similar Messages

Maybe you are looking for