[solved] building go-openoffice / mono 4GB++ RAM = normal I guess

Hi!
I tried building go-oo. Already have had problems with the last few tries, so I set it to nice 15. Still it was making the machine unusable... a look into xfce4-taskmanager was showing me mono with a negative value of Ram allocated, so I didn't notice it at first, but top says:
16857 user 39 19 4847m 2.7g 500 T 0 81.9 2:20.79 mono
So... can this be normal / "intended"?
Last edited by whoops (2009-06-12 11:50:20)

AndyRTR wrote:building OOo makes my 8gb system swap!
Oh, that explains why I can't build it with my 6GB free incl. swap available I guess, thx!
(Memory usage running it is OK)
Last edited by whoops (2009-06-12 11:48:50)

Similar Messages

  • RAM ISSUES A215-S7407 - PSAFGU-01V002 SUSPEND MODE ERROR WITH 4GB RAM

    Hi, im having some troubles with my laptop.
    Because it comes only winth 1GB RAM (512MB x 2) i decided to give it an upgrade to 4GB (Max Capcity) according to specifications details on the support site. So i bought two (2) DIMM Modules KINGSTON 2GB 667MHZ, exact model # KVR667D2S5/2G Everything was working fine until i close the lid and it suspend.
    Normally, when i open the lid, it will wake up, and everything will work fine, BUT NOW when it wakes up i have distorted sound and horizontal lines on screen, and sometimes i get a BSOD (BLUE SCREEN OF DEATH) and it restart itself.
    TEST THAT I MADE:
    ONLY 1 DIMM of 2GB  - IT SUSPEND AND WAKES UP NORMALLY (I tested both Dimms 2GB separately)
    1 DIMM 2GB / 1 DIMM 1GB (TOTAL 3GB) - IT SUSPEND AND WAKES UP NORMALLY
    2 DIMMs 2GB  (TOTAL 4GB) - IT SUSPEND AND WAKES UP WITH DISTORTED SOUND AND HORIZONTAL LINES ON DISPLAY.
    It seems like the problem appears only with Max. Capacity (4GB) RAM and only when it suspend CLOSE THE LID (POWER LED CHANGE COLOR BLUE TO ORANGE AND FADES AND COMES).
    With Hibernation, it works fine, the problem is when it suspend.
    It looks that the problem is on the motherboard, maybe a NEW BIOS RELEASE that fix the situation.
    I appreciate if somebody can speak to TOSHIBA SUPPORT DEVELOPER and ask them for an BIOS Update.
    i know that im not the only one with this problem, there is another person that wrote a post "RAM ISSUES" and refers to the same situation, but as i guess, it wasn't solved at all.

    Make sure you install the memory when the light is not flashing, i.e. completly off not sleeping.
    What if you try adjusting - MSCONFIG/Advanced Options/Maximum Memory
    This signature left intentionally blank.

  • G530-44463​8U Sleep/Hibe​rnate issue with windows7 Ultimate 64Bit with 4GB ram

    I have a problem with Lenovo G530-444638U. I upgraded to 4Gb ram and installed a fresh copy of Windows 7 Ultimate 64bit and I’m facing sleep and hibernation problems. When I try to put laptop to sleep mode and I try to resume from sleep, it restarts by itself. I tried every single option in my power management and every command leads to restart. I also have the same problem with hibernate mode. When I try to resume from hibernate, it restarts and I have option on the screen to delete restoration data in order to continue,  
    Reading on Lenovo forums and Google search, it looks like it is a known issue.  I have the latest graphic and WAN drivers from Intel for win 7 and still I can’t solve issue. Is anyone has same model and expediting this problem, any help would be appreciated. 
    When I downgraded my ram form 4gb to 3gb then sleep and hibernate works fine.  i installed vista ultimate 64bit and had same sleep/hibernate issue. I called lenovo tech support and they told me to call software support, which is provided by third part and it is not free, i don't think it is software issue. I tried diffrent ram and had same issue.
    T6500(2.10GHz), 4GB ram 16HTF25664HY-667E1, BIOS Version     6GET19WW(for NON-HDMI), Lenovo Energy Management 4.4.1.1 2009-10-22 7.67 MB Windows 7 64bit 

    also one more issue i had... is when i try to boot up... somtimes it will go into a loop for a couple times. it will try to load windows(no blue screen)-->reboot--> and ask me if i want to use system recovery/start windows normally.
    any help will be greatly appreciated.
    Thanks very much.

  • Windows 8 (all versions) stop several times, bootcamp 4.0 macbook air core i 5 4GB Ram, 128 SSD

    Hello People.
    1- Macbook Air Core i 5 4GB Ram 128 SSD. mountain lion 10.8.2 (latest updates).
    2- Windows 8 core or windows 8 professional or windows 8 enterprise.
    mixed with:
    Boot camp 4.0 in a 35GB partition.
    Results:
    after complete installing the windows 8  it stops working if I install windows support drivers then stops working again.
    Then I must restart required by pressing the power button for 10 seconds.
    installing on a battery, not charging is OK and works good drivers updated, but when you plug in the charger for charging the MAcbook Air Battery , it stops working again.
    I Confused. May be a driver of

    I see that you are saying all versions of Windows 8 are failing on your system, but are you including 32-bit and 64-bit flavors?  I understand why 32-bit versions might give you grief (too much RAM for a 32-bit system to handle).  A 64-bit system might still have device driver issues.  Microsoft does not auto-magically have all the device drivers in the world that are necessary to make any system usable.  The original device manufacturers must provide Microsoft with drivers before the Windows Update servers would be able to communicate said drivers to the computers in question.
    In regards to Apple devices, Apple has not yet released the device drivers needed to run the hardware with Windows 8.  Apple has released the drivers for previous versions of Windows (XP SP2 and higher, Vista RTM and higher, 7 RTM and higher) to their userbase, but not to Microsoft for distribution through Windows Update (unless I am mistaken).  Until Apple releases a version of Boot Camp updated for use with Windows 8, they have not yet released any form of the full collection of necessary device drivers for normal device function with Windows 8.  Running compatibility mode on the Windows 7 device driver bundle via boot camp is not a fully palatable solution because compatibility mode generally is meant for application programs, not device driver services.  Therefore, partial compatibility might be gained by using the Windows 7 device drivers for Windows 8 with the compatibility mode enabled prior to install.  Unfortunately, much unanticipated incompatibility is equally likely with such a decision.
    Some parting words on the subject may be necessary for clarification: prior to the RTM versions of Windows 8, the trial versions of Windows 8 were distributed with a much wider array of device drivers than the RTMs.  This was for Microsoft's testing purposes.  Furthermore, some of the architecture used during the trial period likely used Windows 7 engines more than Windows 8 engines.  This means the Windows 7 drivers pack would have had more likelihood of working during the Beta and Release Candidate periods than during the final Golden Master period we have now entered.  Regardless, it is not recommended by Apple (our hardware manufacturer) to use another method of installing Windows on a Mac than to utilize Boot Camp.
    As Mende1 suggested, you would be wise to reinstall a previous version of Windows you may have been running.  Also, given your previous post, you will want to repair your OS X installation back to full functionality prior to the Windows reinstall.  For a reasonable timeline estimate, consider that it took 89 days from the original release of Windows 7 by Microsoft until Apple originally released device drivers via an updated Boot Camp.  That puts a reasonable ETA for the necessary Boot Camp update at January 22nd/23rd.  Even though this does not seem to apply to your situation, the discounted download for the Windows 8 Pro Upgrade will end after January 31st.
    Cheers!

  • Poor performance when multitasking on T510, Core i5, Windows 7 64, 4GB RAM, NVidia Optimus 512MB

    I'm saddly disappointed with my new Lenovo performance and don't know what might be the cause. 
    I just got a new T510 with Core i5 processor, 4GB RAM and Windows 7 64. When I run a couple of programs, like Photoshop, a Virtualbox (850 MB of RAM allocated), Google Chrome with a couple of tabs I get stuck.
    It seems that 4GB of memory is not enough for the work I did on a 2GB machine a week ago. 
    The computer's response time is a couple of seconds for window switching. New programs start counting in minutes. RAM consumption reaches 98%, even though no single program is listed to consume more than a 150MB in either Task Manager or Resource monitor. Aero effects work cool, though, there's no sloppiness in the graphical layer of the system.
    Even now, after having Virtualbox killed, remaining processes take up 89% of RAM memory in Resource manager.
    I'm working on AC power supply with "Perfomance" power setting, but I can hardly call it a performance. 
    This is ridiculous, it was supposed to be a fast multitasking machine and it turns out to be a load of junk. I used to work on 2GB, 1.6GHz Celeron with Intel GMA processor, had Ubuntu host and Windows XP guest with 750MB RAM allocated plus a couple of programming tools running and never had such issues _on regular basis_. 
    I'm considering running a Ubuntu on this machine because I simply can't work this way on Windows 7... I can't even kill a process easily because it takes ages to End a process. 
    A friend of mine is running similar setup on a T410 machine with slower CPU and poorer graphics and he says this is really strange, because he never had such problems. My PC is new, 4 days since arrival, his is like 2-months old.
    Has anyone experienced similar problem? What might be the cause? 
    At this point I have Chrome with ~10 tabs, empty Firefox, empty Photoshop, Pidgin, and 3 explorer windows running, Adobe Reader with 1 document and Sticky Notes. RAM consumption is 3495MB in use (yeah right), 276MB standby and 113 free.
    What's wrong here?!
    Please see the screenshot attached: 
    http://img715.imageshack.us/i/captureybh.png/
    Solved!
    Go to Solution.

    Well, the issue is solved. After removing bundled Norton Internet Security suite it runs like gold-plated. 
    I'll get another anti-virus software, then.
    Now, even with the Virtualbox running, I still have like 2GB free RAM. And no lags, no slow-downs. Woohoo.
    **bleep** you Norton!

  • If my Mini is running 64 bit can I run more than 4Gb RAM?

    I hear ALL over the place that the mini can not use more than 4Gb RAM.
    Is this a hardware limitaion of the motherboard/Processor?
    OR
    Is this due to the fact that mini's run at 32 bit?
    You can now easily run modern mini's at 64 bit:
    http://blog.leanopen.nl/2010/04/23/doesnt-your-mac-mini-want-to-boot-in-64-bit/
    So who knows the REAL answer?
    Thanks -
    skibum

    Most of the Minis are limited to less than 4GB and that is a hardware limitation. The newest Mini with the nVidia video can access more. Apple only supports 4GB because they use matched DIMMs, which on paper have a slight performance improvement over unmatched DIMMs. For whatever reason, Apple doesn't yet support 4GB DIMMs in the Mini. (I suspect that the power requirements or prices for the larger DIMMS may have affected Apple's decision.)
    If you do have an appropriate Mini, then you can get compatible 4GB DIMMs from [Macsales|http://eshop.macsales.com/shop/mac-mini> or others. Regardless, although I normally trust Macsales, more than 4GB is not supported by Apple, so you have to take that in to consideration. (i.e.: warranty from Apple or Applecare.)

  • My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

    My itunes opens  2-3 hrs after doubleclicking it to open;it happened once or twice  with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
    1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
    but my problem doesnot get solved even after trying all the methods in the above pages...
    now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

  • IMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB

    iMac 2.4GHz Core 2 Duo 20" Anodized Aluminum (MA877LL)
    iMac 2.4GHz (MA877LL) refuses to boot with 4GB ram, boots only with 3 GB
    2 x2GB Geil GX2S6400-4GDCA
    Computer refuses to boot with both chips installed 4 GB.
    Computer will boot and recognize 3 GB..( Apple 1 GB + 2 GB GEIL)
    Both Geil Chips will boot, when paired with the Apple 1 GB chip.
    machine recognizes 3 GB ram.
    Please advise...

    Ensure the computer's RAM is fully seated down, and then try resetting the PRAM by holding down options-command-P-R at boot. The computer will make the boot chimes and then reset and chime again. When it chimes the second time release the keys and let the thing boot normally. Hopefully that will let it recognize the RAM.

  • XP Pro fails at install with RAID 1 and 4GB RAM on P45 MB - help?

    Hello all,
    I am new to this forum so bear with me.  Having read several threads I see that this forum is very helpful and responsive.  Thanks in advance for all your help and please let me know if I could answer other questions that might help you diagnose this challenge.
    System:
    Antec 900 Case
    MSI P45 Platinum MB
    Intel Q9300 processor
    4GB Corsair DDR2 800GHz
    2 300GB VelociRaptors in RAID 1 configuration
    Gigabyte HD3850 video card
    Not sure if you need all of this, but am pretty sure you will need more.  Please don't hesitate asking if you do.
    My situation is that I can get the hard drives mirrored fine through BIOS using the JMicron controllers, but loading WinXP Pro 32 fails shortly after I insert the JMicron Additional Device floppy.  I have tried several different versions of the device floppy files with the same result.  The error I get is the blue screen Stop 0x0000007B notice that isn't helpful at all.
    RAID is recognized perfectly when turned on.  I just get the Stop 0x0000007B error that stops the installation.  Not sure what to do.  Although likely not relevent, I have some questions. 
    Will XP support 4GB RAM (2 x 2GB Corsair DDR2 800GHz)?  If it only recognizes 3.2GB of it, will the additional memory cause such an issue as described above?  If so, could I use just one 2GB module or do they need to be in pairs?
    Should I scrap the JMicron controllers and uses the Intel controllers?  I would like to think that this is not the remedy, as a neighbor of mine has installed several of these same systems but with Vista.
    Thanks for all your help.   
    Kurt

    Quote
    It would appear the the last two core temperatures are too high, but I suspect that the sensors are bad for them.  These temperatures were within a few minutes of powering the un-taxed computer.
    Run some sort of CPU Stressing application (Prime95, Orthos or similar) to put all cores under full load and check your core temps again.  See how the sensors respond.
    Quote
    Interestingly, when I powered the computer after Hibernation it took longer for Windows to resume than it does to completely boot up (resuming windows status bar at bottom of screen).  However when I put the computer into Stand By mode it will resume really quickly.
    That is normal: In Hibernation mode, all the data that is stored in system memory is copied to a file on your hard drive (basically an image of your system memory is created.) After that the system is completely shut down. When you restart the system, the RAM image is written back to the system memory.
    In S3 Standby Mode, the system still supplies power to the memory.  When you switch the system back on, nothing has to be written back to system memory, as everything is still there.  That is why it is faster.
    Quote
    Is it Stand By that I should be more interested in because of the faster recovery?
    Yes. For power saving, hibernation is the better alternative.
    Quote
    Two questions; one, what settings would I need to awaken the computer without the power switch,
    Look in BIOS under "Wake Up Event Setup" and look at these settings:
    - Wake Up Event By = [BIOS]/[OS]
    - Resume From S3 By USB Device
    - Resume From S3 By PS/2 Keyboard
    - Hot Key
    - Resume From S3 By PS/2 Mouse
    Play around with these settings (I don't know what devices you use) and test what works best for your purposes. I am sure you will figure something out. 

  • Why does my 2012 macbook pro 4gb ram run slow sometimes?

    I've purchased my 2012 4gb ram Macbook ram w/ 500 gb hard drive around September. It started off extremely fast the first 4 months (when I had mavericks), but there we're problems with the Video playback towards the last 4 months (It would Freeze and unfreeze & the the audio-video sync would be way off after 30 mins of netflix, which would cause the whole computer to slow down). So, I installed the Yosemite update, which made it even worse to the point where my macbook was unusable. With yosemite, I'd have an average of 500mb ram free memory available, sometimes even lower. Now, I did a manual restore to OS X 10.8.5 Mountain Lion, and I see the major difference in speed.  I could use safari now & get an average of 1.47 gb of free ram available (with just the safari application open). Now, the video playback issue still occurs sometimes & having about 4 programs open does make the computer slower than usual, but not as often. I'm hoping this is just a ram issue, becuase I'm expecting on upgrading my ram to a 16gb ram or higher while still on Mountain Lion just to be able to run Logic Pro & Adobe Premiere in the near future. If its not a ram issue which is causing this problem on my macbook, I'd be ****** because I'd be spending almost $200 on a ram upgrade and it not resolving this issue would kill me. Could someone help? Ill even take a Diagnose test like Etrecheck if you need me to. Thanks.

    Hello, you had me lost on what you explained. But, here's my Etrecheck report. Thanks.
    EtreCheck version: 2.1.8 (121)
    Report generated March 10, 2015 12:38:17 PM EDT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        MacBook Pro (13-inch, Mid 2012) (Technical Specifications)
        MacBook Pro - model: MacBookPro9,2
        1 2.5 GHz Intel Core i5 CPU: 2-core
        4 GB RAM
            BANK 0/DIMM0
                2 GB DDR3 1600 MHz ok
            BANK 1/DIMM0
                2 GB DDR3 1600 MHz ok
        Bluetooth: Good - Handoff/Airdrop2 supported
        Wireless:  en1: 802.11 a/b/g/n
        Battery Health: Normal - Cycle count 343
    Video Information: ℹ️
        Intel HD Graphics 4000 - VRAM: 512 MB
            Color LCD 1280 x 800
    System Software: ℹ️
        OS X 10.8.5 (12F45) - Time since boot: 5 days 10:0:0
    Disk Information: ℹ️
        APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
            disk0s1 (disk0s1) <not mounted> : 210 MB
            Untitled (disk0s2) / : 499.25 GB (479.98 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
        Apple Inc. Apple Internal Keyboard / Trackpad
        Apple Inc. BRCM20702 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Computer, Inc. IR Receiver
        Apple Inc. FaceTime HD Camera (Built-in)
    Thunderbolt Information: ℹ️
        Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
        Anywhere
    Kernel Extensions: ℹ️
            /System/Library/Extensions
        [loaded]    com.globaldelight.driver.BoomDevice (1.1) [Click for support]
    Problem System Launch Agents: ℹ️
        [failed]    com.apple.accountsd.plist
        [failed]    com.apple.coreservices.appleid.authentication.plist
        [failed]    com.apple.gamed.plist
        [failed]    com.apple.printtool.agent.plist
        [failed]    com.apple.rcd.plist
    Problem System Launch Daemons: ℹ️
        [failed]    com.apple.coreservices.appleid.passwordcheck.plist
        [failed]    com.apple.findmymac.plist
        [failed]    com.apple.wdhelper.plist
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
    Internet Plug-ins: ℹ️
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        QuickTime Plugin: Version: 7.7.1
        JavaAppletPlugin: Version: 14.6.0 - SDK 10.8 Check version
        SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
    Safari Extensions: ℹ️
        AdBlock
    3rd Party Preference Panes: ℹ️
        Flash Player  [Click for support]
    Time Machine: ℹ️
        Time Machine not configured!
    Top Processes by CPU: ℹ️
            19%    WebProcess
             7%    Safari
             5%    WindowServer
             4%    Boom
             4%    mds
    Top Processes by Memory: ℹ️
        994 MB    WebProcess
        343 MB    Safari
        43 MB    WindowServer
        34 MB    mds
        26 MB    Dock
    Virtual Memory Information: ℹ️
        905 MB    Free RAM
        1.37 GB    Active RAM
        796 MB    Inactive RAM
        1.22 GB    Wired RAM
        5.11 GB    Page-ins
        6.51 GB    Page-outs

  • Trying to get 32-bit Vista to see more than 2.5 gb of my 4gb ram - T500

    Hello all,
    I've been reading what I'm able to find on the subject, and have tried the following suggestions from (http://www.ocmodshop.com/ocmodshop.aspx?a=989) to bump up the amount of physical ram that Vista sees. I've tried to forceenable pae, and then :
    Type BCDedit /set nx AlwaysOff
    Type BCDedit /set pae ForceEnable
     Setting DEP off, and neither had any effect on the physical RAM available. I read a few posts hinting that these options may be unecessary in SP1 of vista as well. So, here are my questions :
    1. Is it possible for the T500 with 32-bit Vista to address more than 2.5gb of  physical ram?
    2. If so, how can I do it?
    3. Am I eligible for a 64-bit version of Vista with the recent purchase of my T500 and Vista Business?
    Any information is greatly appreciated. Thanks much all....
    Solved!
    Go to Solution.

    zoopside wrote:
    I changed to DISCRETE GRAPHICS, rebooted : still @ 2.5, then DISABLE SWITCHABLE, rebooted : still @ 2.5. My ATI driver was "found" again, rebooted, and now I'm still @ 2.5.
    I'll try a few more permutations of the options available, but did you do anything else?
    Keep rebooting.  At some point your system will recognize the additional ram.
    My system did the same thing as yours.  At first it showed an additional 54mb or so.
    Then all of sudden it was up to 3,065mb.  I can't remember how many reboots before
    the big jump occurred.  I am guessing 3 to 4 more reboots over a day or two.
    I don't know why it takes several reboots before the system will recognized the additional ram.
    T500 ~ T9400 2.53GHz 1066MHz 6MBL2 ~ Vista 32bit Home ~ WXGA 15.4 LED ~ ATI Mobility Radeon 3650 ~ 4GB ram ~ Camera ~ 160GB 7200rpm HD ~ Intel Turbo Memory 2GB ~ CD-RW/DVD ~ Intel WiFi 5300

  • X-Fi Xtreme Audio & 4GB RAM issue - latest driver?

    :X-Fi Xtreme Audio & >4GB RAM issue - latest driver?T Hi All,
    Been using an X-Fi Xtreme Audio with 4GB RAM for ages, no issues.
    I purchased and installed a zotac 9600 GT which has GB onboard ram, which works fine, but now my X-Fi has started causing general system instability. (processes using heaps of CPU time whilst apparently doing not much, jerky/slow adobe flash, distorted (slow-motion) audio at random times, etc etc.
    In the support section here it says:
    Audio issue from output from soundcard with computer having 4GB RAM:
    <span class="text">
    Keywords: <font>4GB ram, installation, xfi, x-fi
    Summary: Customers with computers having <font>4GB or above of RAM and are experiencing audio issues, please download the latest driver for your sound card.
    However... When this issue first came up I formatted my primary dri've, reinstalled the OS and downloaded the latest drivers for EVERYTHING. The problem has prevailed..
    It was only yesterday that I tracked down this problem in the support section here, and tried to verify that my driver is indeed the latest. But device manager lists the driver as "6.0.0.209" when in the support section here the downloads are named ".xx.xxxx" or something. How can I confirm that I have the latest driver? In any case, I'm almost certain that I have the latest, and this issue is still occuring.
    I have read in other forums that on other varients of my X-FI card, the latest drivers have not solved this problem either.. sorry I cant be more accurate than that.
    For now, I have solved this problem by simply removing 2GB of ram from my PC. Obviously, I'd like to find a solution and put the other 2GB back in!
    Thanks in advance for your help!

    Could DanielK please mod this as well, so we can try them. Or Daniel, you could you please tell me how you modified the previous drivers from auzentech as I dont know how these CL drivers work and are modified. What is the inf in these drivers, and if you could tell me the deviceID?s of all the x-fi models, or atleast for x-fi xtreme music as it is my modell. Thx in advance!
    EDIT:
    I have modified the drivers, was not so hard after all. Im uploading the file now, which should have support for all X-FI cards thanks to Daniel's great job with the earlier version.
    Upload finished in 4-5minutes. I will post with link soon to rapidshare!

  • Vista x64 - 4gb ram - need suggesti

    I've experienced the same problems as noted on other posts on this site regarding the X-fi sound card and 4gb of ram. Horrible crackling and popping...
    ?I am running Vista 64bit with 4 gigs of ram... I've tried getting my X-fi extreme music card to work to no avail. I've tried my old Audigy 2zs card that I had in another computer which seemed to work for a time, but then started blue screening... My question is this:? Is there a good sound card at this time that supports Vista 64 with 4gb ram?I don't want to settle for on-board audio as I play cpu intense games, and I don't want to settle for removing 2gb of ram to solve the issue. Any suggestions would be great!?Thanks,?[url=mailto:[email protected]">[email protected][/url]?

    Someone posted a while ago that they adjusted their Vista power settings and it fixed the problem. It was said that if you set it to the "high performance" setting it would solve some of the issues with the "popping" problem. My system has been set to high performance for a while and I have no issue with it and others have said this works for them.
    The default power setting in Vista is "Balanced".
    Message Edited by SGV on 04-05-200702:7 PM

  • How to use 4GB RAM on Windows 2000

    Hi,
    We use a third party application that parses weblogs and generates statistics.
    The application gives OutOfMemory exception when the weblogs are hugs.
    I am wondering if doing "editbin.exe /LARGEADDRESSAWARE java.exe" is going to help.
    I have 4GB of physical RAM and I have /3GB in boot.ini in Windows 2000 Advanced Server.
    Thanks,
    Anurag.

    How to use 4GB RAM on Windows 2000You are never going to use 4g on a windows box. The maximum addressable space is 4g. Normally the OS reserves 2g. Which means the maximum addressable space for an application is 2g.
    It is supposed to be possible to increase the addressable space to 3 gig. And also increase the JVM space. However, there are risks. The following thread suggests a way to do this
    http://forum.java.sun.com/thread.jsp?forum=37&thread=201718

  • Upgrading a dv6000 to 4gb ram

    Hi there,
    I have just dug out my old HP and would like to get a few programs running that are not available on Mac. Most of them need 4gb ram however and my laptop, according to Crucial's system scanner can only support 2gb. I am no expert on upgrading a laptop and need to know the easiest way to enable my computer to accomodate 4gb ram. Would it involve swapping the motherboard, if so what is a good, cost effective alternative? Thanks
    edit: more info on my laptop...
    This question was solved.
    View Solution.

    Your processor is a 32 bit processor so you will not be able to fully utilize 4 gigs of RAM even if you could install it. The first thing to do is update the BIOS to the latest version:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90466-1&cc=us&dlc=en&lc=en&...
    I assume the laptop still has Windows Vista on it which is good becasue you should not try to install the BIOS update from Windows 7.
    I do know that the dv6000 series will take 3 gigs of RAM, but not 4 for some reason. So you can buy a 2 gig and a 1 gig and they will work. If the programs you want to run really require 4 gigs I am afraid that laptop cannot supply it. 

Maybe you are looking for