[SOLVED] Building perl failed cannot load libperl.so

I'm trying build base packages on another arch (sh4).
Is there any tip about this build error?
yaourt -SAb perl
omit
http://archlinuxarm.org/developers/building-packages
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
==> Starting package()...
./perl: error while loading shared libraries: libperl.so: cannot open shared object file: No such file or directory
==> ERROR: A failure occurred in package().
Aborting...
==> ERROR: Makepkg was unable to build perl.
==> Restart building perl ? [y/N]
==> -----------------------------
$ sudo find . -name libperl.so
./src/perl-5.16.2/libperl.so
temp solution
added LD_LIBRARY_PATH in PKGBUILD of package()
Last edited by dlin (2013-02-02 05:01:39)

Similar Messages

[Solved] Ncmpcpp Visualizer Failed To Load (Blank)

I've install ncmpcpp and mpd and I've followed each guide to enable visualization. Unfortunately I don't know what have cause it to failed to load.
Everytime I hit '9' to reveal it, it just showing blank terminal..for your information all of my songs just played fine.
I used config from one of our member via this thread. here is my .ncmpcpp/config:
##### connection settings #####
mpd_host = "localhost"
mpd_port = "6600"
mpd_music_dir = "/home/drfreddy/Music"
mpd_connection_timeout = "5"
mpd_crossfade_time = "1"
mpd_communication_mode = "notifications" (polling/notifications)
visualizer_fifo_path = "/tmp/mpd.fifo"
visualizer_output_name = "my_fifo"
visualizer_sync_interval = "1"
visualizer_type = "wave" (spectrum/wave)
system_encoding = "utf-8"
##### delays #####
playlist_disable_highlight_delay = "5"
message_delay_time = "4"
# Playlist
song_columns_list_format = "(7f)[cyan]{l} (25)[blue]{a} (40)[red]{t|f} (30)[magenta]{b}"
song_list_format = "{$3[%l]$9} {$5%a$9} - {$2%t$9} - {$6%f$9}"
now_playing_prefix = "$b$1» "
now_playing_suffix = "$/b"
playlist_display_mode = "columns" (classic/columns)
autocenter_mode = "yes"
centered_cursor = "yes"
cyclic_scrolling = "yes"
mouse_list_scroll_whole_page = "no"
# # Bars
song_status_format = "{%a - }{%t - }{%b}"
progressbar_look = "─╼ "
titles_visibility = "no"
header_visibility = "no"
statusbar_visibility = "yes"
# Browser
browser_playlist_prefix = "$2plist »$9 "
browser_display_mode = "classic" (classic/columns)
# Colors
discard_colors_if_item_is_selected = "yes"
header_window_color = "default"
volume_color = "cyan"
state_line_color = "white"
state_flags_color = "green"
main_window_color = "default"
color1 = "cyan"
color2 = "black"
main_window_highlight_color = "red"
progressbar_color = "cyan"
statusbar_color = "white"
active_column_color = "red"
visualizer_color = "cyan"
# Others
song_window_title_format = "MPD: {%a > }{%t}|{%f}"
search_engine_display_mode = "columns" (classic/columns)
follow_now_playing_lyrics = "yes"
display_screens_numbers_on_start = "no"
user_interface = "alternative" (classic/alternative)
And here is my .mpdconf:
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/drfreddy/Music/"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "~/.mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "~/.mpd/database"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
#log_file "~/.mpd/log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
#pid_file "~/.mpd/pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
#state_file "~/.mpd/state"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "drfreddy"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
#group "nogroup"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
gapless_mp3_playback "yes"
# Setting "restore_paused" to "yes" puts MPD into pause mode instead
# of starting playback after startup.
#restore_paused "no"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. The complete list of possible values can be
# found in the mpd.conf man page.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "Beats by Dr. Freddy"
device "hw:0,0" # optional
format "44100:16:2" # optional
mixer_type "software" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## url "http://example.com" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Client TCP keep alive #######################################################
# For clients connected by TCP on supported platforms.
# Allows detection of dangling connections due to clients disappearing from
# the network without closing their connections.
# This is not usually necessary but can be useful in cases such as wifi connectected
# clients that go in and out of network range or turn off wifi without closing their
# connections. Combined with low max_connections this can soon cause clients to not
# be able to connect.
# Enable tcp keepalive on new client connections (default is "no")
#tcp_keep_alive "no"
# Time in seconds since the last communication on the connection and before
# the keepalive probing is started. (default is 7200 seconds)
#tcp_keep_alive_idle "7200"
# Interval in seconds between keepalive probes, once a probe started.
# (default is 75 seconds)
#tcp_keep_alive_interval "75"
# Number of failed probes before the connection is pronounced dead and
# the connection is closed. (default is 9 times)
#tcp_keep_alive_count "9"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
#filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"
audio_output {
type "fifo"
name "my_fifo"
path "/tmp/mpd.fifo"
Can somebody tell me how to enable the visualization? Am I missing something?
Last edited by Archer1X (2013-02-07 10:48:34)

Nevermind..got it working after configured that I have to put this line in .ncmpcpp/config:
visualizer_look = "+|"
Anybody have a better look for the visualizer?
I also have tried several figures like "=="..hmm..kinda like it..
Last edited by Archer1X (2013-02-07 10:49:13)

[SOLVED]Gtk-Message: Failed to load module "canberra-gtk-module"

Hi,
I'm getting this message
Gtk-Message: Failed to load module "canberra-gtk-module"
keepassx: symbol lookup error: /usr/lib/gtk-2.0/2.10.0/engines/libindustrial.so: undefined symbol: gtk_check_version
for various gtk-based applications.
I've read that is fixed, https://bugs.archlinux.org/task/23655.
Using Arch 64 bit, XFCE here.
Any clue?
Last edited by kinu (2011-09-29 13:17:06)

Changing gtk theme do the trick. I get the message, but applications start ok.

[Solved] Nvidia module fails to load on lastest kernel (3.6.7-1-ARCH)

Hi there!
I have just updated my desktop PC yesterday, as I normally do every week (yaourt -Syu --aur), and today when I rebooted my Xorg refuses to load.
I've checked the logs, etc, and I think there's a problem with the nvidia module. In fact, I can't even modprobe it.
I've googled for hours, but I can't find any solution out there...
Here you have the log: https://dl.dropbox.com/u/1732176/Xorg.0.log
Any hint will be appreciated...
Thanks in advance ^^
Last edited by roobre (2012-11-24 16:18:40)

falconindy wrote:
[ 24.672] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 24.672] (EE) NVIDIA: system's kernel log for additional error messages.
Perhaps you should look at dmesg.
Thanks!
Looking there I found:
[ 5.371106] NVRM: The NVIDIA GeForce 7100 / nForce 630i GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 310.19 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
I'll try to pacman those drivers and check again...
[EDIT]
Yeehaa!
It works! ^^
Thank you so much
Last edited by roobre (2012-11-24 16:18:27)

[SOLVED?] Openbox+perlpanel - cannot load NotificationArea applet

Hi,
I installed perlpanel to work with my Openbox, and of course all dependencies required. I have NOT Gnome installed.
The provided NotificationArea applet does not load though, I am wondering if I am missing a dependency. This is the error message I get:
Can't locate Gtk2/TrayManager.pm in @INC (@INC contains: /usr/lib/perlpanel /usr/lib/perl5/site_perl/5.10.1 /usr/share/perl5/site_perl/5.10.1 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current . /home/stefano/.perlpanel/applets /usr/lib/perlpanel/PerlPanel/Applet) at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
BEGIN failed--compilation aborted at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
Compilation failed in require at (eval 24) line 1.
Any clue?
Thanks
gm
Last edited by gattu_marrudu (2010-01-11 20:52:43)

gattu_marrudu wrote:
Hi,
I installed perlpanel to work with my Openbox, and of course all dependencies required. I have NOT Gnome installed.
The provided NotificationArea applet does not load though, I am wondering if I am missing a dependency. This is the error message I get:
Can't locate Gtk2/TrayManager.pm in @INC (@INC contains: /usr/lib/perlpanel /usr/lib/perl5/site_perl/5.10.1 /usr/share/perl5/site_perl/5.10.1 /usr/lib/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib/perl5/core_perl /usr/share/perl5/core_perl /usr/lib/perl5/current /usr/lib/perl5/site_perl/current . /home/stefano/.perlpanel/applets /usr/lib/perlpanel/PerlPanel/Applet) at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
BEGIN failed--compilation aborted at /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm line 21.
Compilation failed in require at (eval 24) line 1.
Any clue?
Thanks
gm
there maybe something wrong with line 21 /usr/lib/perlpanel/PerlPanel/Applet/NotificationArea.pm.

[SOLVED] acpi-cpufreq fail to load

I had been using cpufreq to use the ondemand governor for a long time and it worked al right. Last update changed cpufreq to cpupower and I can no longer use cpu freq. scaling. And insmod won't load the acpi-cpufreq mod. I remeber well I used this module to get scaling to work. I have an amd athlon X2. And acpi support is enabled from BIOS.
Last edited by debdj (2013-03-29 08:09:55)

mich41 wrote:
Please clean up this post. There's lot of duplicates and irrelevant stuff.
If acpi-cpufreq suddenly stopped working after update it must be a kernel bug (unless you updated BIOS at the same time).
Start with pacman -Syu since 3.7 branch is dead.
Okay, but where do you see duplicates?

[solved] Filesystem check fail - Cannot access LVM Logical Volumes

I am getting a "File System Check Failed"on startup, I recently did a full system upgrade but I'm not entirely sure that the cause of the issue as I don't reboot very often.
I get the error right before this line is echo'ed out:
/dev/mapper/Arch_LVM-Root:
The super block could not be read or does not describe a correct ext2 filesystem...
this is odd because the only ext2 filesystem I have is on an non-LVM boot partition...
I can log-in and mount / as read/write and I can activate LVM with
modprobe dm-mod
and
vgchange -ay Arch_LVM
and they show up in lvdisplay but their status is "NOT available"
I just need to mount these logical volumes so I can retrieve some personal data in my home directory, I am also hesitant to use LVM again if I can't retrieve my data.
any suggestions?
Last edited by action_owl (2010-08-15 02:15:58)

I just popped in the install disk and was able to mount and access the LVM groups as expected, something must have been wonky with my filesystem

Export Release Build Flash Builder 4.5 fails to load over the web.

Exported Release Build Application fails to load over the web. You can reproduce using the following steps:
1. Create New Flex Project in Trial Flash Builder 4.5.
2. Use the default Flex 4.5 sdk.
3. Configure as a web application.
3. Place the following MXML code in the main application file:
<?xml version = "1.0" encoding = "utf-8"?>
<s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"
xmlns:s = "library://ns.adobe.com/flex/spark"
xmlns:mx = "library://ns.adobe.com/flex/mx"
minWidth = "955"
minHeight = "600">
<fx:Declarations>

</fx:Declarations>
<s:TextArea text = "Hello World!" width = "100%" height = "100%">
</s:TextArea>
</s:Application>
3. Save the main application file and Export Release Build to bin-release.
4. Place all files in bin-release on IIS web server in a web accessible location.
5. Go to the web accessible location in any browser with newest flash player and view the application's html page.
Actual Results:
Flash movie appears blank. Context menu shows Movie Not Loaded. Network traffic shows application main swf downloaded. Framework dependent swfs not downloaded.
Expected Results:
Movie loads. Hello World! appears in text box. Context menu does not show Movie Not Loaded. Framework dependent swfs downloaded.
Workaround (if any):
Deploy on an Apache web server.
The tests were run on IIS 7.x (7.0 for one, and 7.5)
Flex application was built using Flex 4.5.0 SDK pre-bundled release (built-in flex 4.5 with Flash Builder 4.5 trial) on Mac OS X 10.6.7 (10J869)
Flash Player 10.3.181.14
Example failing website:
http://staging.ibenergy.com/Test.html
Any idea as to why my exported release build fails? Any help would be appreciated.

Just tried this out on an IIS server with Flash player 10.3.181.14 - it worked.
Are you using the release version of Flash Builder 4.5 with the release version of Flex SDK (not a prior SDK build)?
The URL you mentioned gives me a 403 forbidden error.
-Anirudh

Cannot load nvidia driver module [SOLVED]

OK so for some reason I can no longer load the nvidia (proprietary) driver.
I have a laptop with optimus, on board intel and discrete nvidia GTX680M. I use this laptop for cuda development so I don't care about games etc, I just need the driver loaded to debug and run my cuda apps. bbswitch still works fine as does bumblebee which I don't use normally but I do have it setup and running in case. Also I didn't really work much on coding last week so not sure exactly when this started.
So here is what happens when I try to insert the nvidia module or use optirun:
$ sudo modprobe nvidia
modprobe: ERROR: could not insert 'nvidia': No such device
$ sudo insmod nvidia
insmod: ERROR: could not load module nvidia: No such file or directory
$ optirun -vv glxspheres
[ 27.485342] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 27.485506] [INFO]Configured driver: nvidia
[ 27.485635] [DEBUG]optirun version 3.2.1 starting...
[ 27.485642] [DEBUG]Active configuration:
[ 27.485645] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 27.485662] [DEBUG] X display: :8
[ 27.485674] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 27.485676] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 27.485679] [DEBUG] Accel/display bridge: primus
[ 27.485681] [DEBUG] VGL Compression: xv
[ 27.485684] [DEBUG] VGLrun extra options:
[ 27.485686] [DEBUG] Primus LD Path: /usr/lib:/usr/lib32
[ 27.560627] [INFO]Response: No - error: Could not load GPU driver
[ 27.560647] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 27.560651] [DEBUG]Socket closed.
[ 27.560666] [ERROR]Aborting because fallback start is disabled.
[ 27.560671] [DEBUG]Killing all remaining processes.
I don't have an xorg file for the intel gpu.
device nodes are created:
$ ls /dev/ | grep nv
crw-rw-rw- 1 root root 195, 0 Sep 24 14:58 nvidia0
crw-rw-rw- 1 root root 195, 255 Sep 24 14:58 nvidiactl
log info:
$cat /var/log/Xorg.0.log | grep EE
[ 3.385] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.299] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.308] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.308] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.309] (EE) Failed to load module "fbdev" (module does not exist, 0)
$ cat /var/log/Xorg.8.log
[ 11367.762]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 11367.762] X Protocol Version 11, Revision 0
[ 11367.762] Build Operating System: Linux 3.11.0-1-ARCH x86_64
[ 11367.762] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
[ 11367.762] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1c3a736e-6aab-45e1-a9ad-5d2f6195cd7d ro quiet
[ 11367.762] Build Date: 13 September 2013 01:28:59PM
[ 11367.762]
[ 11367.762] Current version of pixman: 0.30.2
[ 11367.762] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 11367.762] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11367.762] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Sep 19 23:04:24 2013
[ 11367.762] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 11367.762] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 11367.762] (==) ServerLayout "Layout0"
[ 11367.762] (==) No screen section available. Using defaults.
[ 11367.762] (**) |-->Screen "Default Screen Section" (0)
[ 11367.762] (**) | |-->Monitor "<default monitor>"
[ 11367.762] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 11367.762] (**) | |-->Device "DiscreteNvidia"
[ 11367.762] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11367.762] (**) Option "AutoAddDevices" "false"
[ 11367.762] (**) Option "AutoAddGPU" "false"
[ 11367.762] (**) Not automatically adding devices
[ 11367.762] (==) Automatically enabling devices
[ 11367.762] (**) Not automatically adding GPU devices
[ 11367.762] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11367.762] Entry deleted from font path.
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11367.762] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11367.762] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 11367.762] (==) |-->Input Device "<default pointer>"
[ 11367.763] (==) |-->Input Device "<default keyboard>"
[ 11367.763] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 11367.763] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 11367.763] (II) Loader magic: 0x7fdc20
[ 11367.763] (II) Module ABI versions:
[ 11367.763] X.Org ANSI C Emulation: 0.4
[ 11367.763] X.Org Video Driver: 14.1
[ 11367.763] X.Org XInput driver : 19.1
[ 11367.763] X.Org Server Extension : 7.0
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11367.763] setversion 1.4 failed
[ 11367.764] (--) PCI:*(0:1:0:0) 10de:11a0:1558:5105 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 11367.764] Initializing built-in extension Generic Event Extension
[ 11367.764] Initializing built-in extension SHAPE
[ 11367.764] Initializing built-in extension MIT-SHM
[ 11367.764] Initializing built-in extension XInputExtension
[ 11367.764] Initializing built-in extension XTEST
[ 11367.764] Initializing built-in extension BIG-REQUESTS
[ 11367.764] Initializing built-in extension SYNC
[ 11367.764] Initializing built-in extension XKEYBOARD
[ 11367.764] Initializing built-in extension XC-MISC
[ 11367.764] Initializing built-in extension SECURITY
[ 11367.764] Initializing built-in extension XINERAMA
[ 11367.764] Initializing built-in extension XFIXES
[ 11367.764] Initializing built-in extension RENDER
[ 11367.764] Initializing built-in extension RANDR
[ 11367.764] Initializing built-in extension COMPOSITE
[ 11367.764] Initializing built-in extension DAMAGE
[ 11367.764] Initializing built-in extension MIT-SCREEN-SAVER
[ 11367.764] Initializing built-in extension DOUBLE-BUFFER
[ 11367.764] Initializing built-in extension RECORD
[ 11367.764] Initializing built-in extension DPMS
[ 11367.764] Initializing built-in extension X-Resource
[ 11367.764] Initializing built-in extension XVideo
[ 11367.764] Initializing built-in extension XVideo-MotionCompensation
[ 11367.764] Initializing built-in extension XFree86-VidModeExtension
[ 11367.764] Initializing built-in extension XFree86-DGA
[ 11367.764] Initializing built-in extension XFree86-DRI
[ 11367.764] Initializing built-in extension DRI2
[ 11367.764] (II) LoadModule: "glx"
[ 11367.764] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 11367.773] (II) Module glx: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Server Extension
[ 11367.773] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 11367.773] Loading extension GLX
[ 11367.773] (II) LoadModule: "nvidia"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11367.773] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Video Driver
[ 11367.773] (II) LoadModule: "mouse"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 11367.773] (II) Module mouse: vendor="X.Org Foundation"
[ 11367.773] compiled for 1.14.0, module version = 1.9.0
[ 11367.773] Module class: X.Org XInput Driver
[ 11367.773] ABI class: X.Org XInput driver, version 19.1
[ 11367.773] (II) LoadModule: "kbd"
[ 11367.774] (WW) Warning, couldn't open module kbd
[ 11367.774] (II) UnloadModule: "kbd"
[ 11367.774] (II) Unloading kbd
[ 11367.774] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11367.774] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 11367.774] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11367.774] (--) using VT number 7
[ 11367.774] (II) Loading sub module "fb"
[ 11367.774] (II) LoadModule: "fb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11367.774] (II) Module fb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11367.774] (II) Loading sub module "wfb"
[ 11367.774] (II) LoadModule: "wfb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11367.774] (II) Module wfb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "shadow"
[ 11367.774] (II) LoadModule: "shadow"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 11367.774] (II) Module shadow: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.1.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "ramdac"
[ 11367.774] (II) LoadModule: "ramdac"
[ 11367.774] (II) Module "ramdac" already built-in
[ 11367.774] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11367.774] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11367.775] (==) NVIDIA(0): RGB weight 888
[ 11367.775] (==) NVIDIA(0): Default visual is TrueColor
[ 11367.775] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11367.775] (**) NVIDIA(0): Option "NoLogo" "true"
[ 11367.775] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseEDID" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 11367.775] (**) NVIDIA(0): Enabling 2D acceleration
[ 11367.775] (**) NVIDIA(0): Ignoring EDIDs
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 11367.775] (**) NVIDIA(0): mode
[ 11368.299] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 11368.300] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680M (GK104) at PCI:1:0:0 (GPU-0)
[ 11368.300] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 11368.300] (--) NVIDIA(0): VideoBIOS: 80.04.29.00.01
[ 11368.300] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11368.300] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680M at PCI:1:0:0
[ 11368.300] (--) NVIDIA(0): none
[ 11368.300] (II) NVIDIA(0): Validated MetaModes:
[ 11368.300] (II) NVIDIA(0): "nvidia-auto-select"
[ 11368.300] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 11368.300] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 11368.300] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 11368.300] (--) Depth 24 pixmap format is 32 bpp
[ 11368.300] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 11368.300] (II) NVIDIA: access.
[ 11368.304] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 11368.304] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 11368.304] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 11368.304] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 11368.304] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 11368.304] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 11368.304] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 11368.304] (II) NVIDIA(0): Config Options in the README.
[ 11368.304] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 11368.308] Loading extension NV-GLX
[ 11368.312] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 11368.312] (==) NVIDIA(0): Backing store disabled
[ 11368.312] (==) NVIDIA(0): Silken mouse enabled
[ 11368.312] (==) NVIDIA(0): DPMS enabled
[ 11368.312] Loading extension NV-CONTROL
[ 11368.312] (II) Loading sub module "dri2"
[ 11368.312] (II) LoadModule: "dri2"
[ 11368.312] (II) Module "dri2" already built-in
[ 11368.312] (II) NVIDIA(0): [DRI2] Setup complete
[ 11368.312] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 11368.312] (--) RandR disabled
[ 11368.316] (II) Initializing extension GLX
[ 11368.342] (II) Using input driver 'mouse' for '<default pointer>'
[ 11368.342] (**) Option "CorePointer" "on"
[ 11368.342] (**) <default pointer>: always reports core events
[ 11368.342] (WW) <default pointer>: No Device specified, looking for one...
[ 11368.422] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 11368.422] (--) <default pointer>: Device: "/dev/input/mice"
[ 11368.422] (==) <default pointer>: Protocol: "Auto"
[ 11368.422] (**) <default pointer>: always reports core events
[ 11368.422] (**) Option "Device" "/dev/input/mice"
[ 11368.475] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 11368.475] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 11368.475] (**) <default pointer>: Buttons: 9
[ 11368.475] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 11368.475] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 11368.475] (**) <default pointer>: (accel) acceleration profile 0
[ 11368.475] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 11368.475] (**) <default pointer>: (accel) acceleration threshold: 4
[ 11368.475] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 11368.769] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 11368.769] (II) LoadModule: "kbd"
[ 11368.769] (WW) Warning, couldn't open module kbd
[ 11368.769] (II) UnloadModule: "kbd"
[ 11368.769] (II) Unloading kbd
[ 11368.769] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11368.769] (EE) No input driver matching `kbd'
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 11368.772] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11368.772] setversion 1.4 failed
[ 11368.772] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event1)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event2)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/mouse0)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event16)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event18)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event8)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11374.183] (II) UnloadModule: "mouse"
[ 11374.199] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 11374.200] (EE) Server terminated successfully (0). Closing log file.
I'm not willing to give up and install/build the drivers from the cuda SDK just yet so any help would be greatly appreciated.
Last edited by tim (2013-10-02 08:20:49)

So in simple terms, the fix invovled ensuring the nvidia module is loaded before the bbswitch module. I'm not sure about the necessity of the things that follow but the fix may possibly also require removing bumblebee and possibly requires removing nvidia from repos and building the driver downloaded from nvidia.
This fix could be completely unrelated to the problems I was having with arch but I cannot verify the fix on arch specifically cos I installed every distro under the sun trying to get it all working and I got it to work on a non arch distro.
So... I'm not sure if I should really mark this a solved because I haven't/can't verify it on arch and technically the solution involved changing to another distro but in fact, I know it has absolutely nothing to do with arch since I saw the same behaviour on 3 other distros. If I have time, I will reinstall arch and verify but for the moment, I have a lot of work to catch up on now that I have a working nvidia driver I can actually use for dev
Anyway, what I think is going on is there is some bizarre issue with bbswitch that stops the nvidia driver from being found because on the current distro I have installed, if I have no bbswitch, no bumblebee and no nvidia modules loaded or services running etc. I can modprobe the nvidia driver and all works fine. I can then modprobe the bbswitch driver and that works too. IF I modprobe the bbswitch driver first and then modprobe the nvidia driver, I get this error that says the nvidia module cant be found. The location it prints is in some updates directory whcih is odd too because I installed from nvidia source and never installed updates at all and made sure that there were absolutely no repo nvidia drivers or updates etc.
Last edited by tim (2013-10-02 08:35:39)

Error: The Task has failed to load on Execute Package Task using TFS Build and MSBuild.exe on dedicated Build Machine.

I'm trying to automate my building and deployment of SSIS packages using TFS build definitionss in conjunction with MSBuild.exe on a separate build machine.
I have successfully built and deployed my projects but receive the following error:
Error: Failed to load task "etl_UWP_Stage_tstg_7_Large",type "". The contact information for this task is "Microsoft Corporation: Microsoft SQL Server .... "
This error happens at runtime as well as if I perform a "Validate..." on the SSIS Catalog on the server.
This only occurs when trying to execute a package that contains an Execute Package Task. Any other packages that are doing the actual work are working just fine.
In addition, when I do the MSBuild from my developer machine with the same deployment process everything works fine, even the Execute Package Task.
I can even open up the project on the build machine in VS2012, rebuild all, then deploy and everything works fine.
Some things I've considered/verified:
1) Visual Studio 2012 and Visual Studio Data Tools 2012 are both on the build machine and my local machine.
2) The .NET version being used by VS2012 is the same on the build machine and my local machine.
3) I find it suspicious that the "Type" referenced in the error above is blank...but not sure where to go with that.
4) Obvious difference is that during the TFS Build and Deploy on the build machine, everything is running under the TFS Service account, rather than my account...once again...not sure where to go with this, but it is a significant difference.
Has anyone had similar issues or have any thoughts on things to try?
Thanks,
Jason

Not sure why I couldn't find this answer in my earlier searches...
But this thread solved it for me:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/3aa1e324-da32-4ea0-865c-c69f610ef262/failed-to-load-execute-package-task-error?forum=sqlintegrationservices
Essentially I had to install SSIS on the build machine so that the 64-bit version for
ExecPackageTask.dll, was available. I did this from the original media CD selection Integration Services as a feature.
Hope this helps someone in the future.

[SOLVED] XOrg fails to load Nvidia driver on startup

Hi,
I'm having a fairly strange issue where XOrg is failing to load my driver when I start up my laptop. I'm using kdm, but this is causing it to fail. However, doing a simple
$sudo systemctl restart kdm
works, and everything starts up fine. When kdm is in the failed state, I see this:
$sudo systemctl status kdm
● kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2014-12-19 18:47:26 EST; 41s ago
Main PID: 247 (kdm)
CGroup: /system.slice/kdm.service
└─247 /usr/bin/kdm -nodaemon
Dec 19 18:47:26 laptop systemd[1]: Started K Display Manager.
Dec 19 18:47:27 laptop kdm[247]: X server died during startup
Dec 19 18:47:27 laptop kdm[247]: X server for display :0 cannot be started, session disabled
And in my XOrg log, I see:
[ 3.639]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 3.639]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 3.639] X Protocol Version 11, Revision 0
[ 3.639] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 3.639] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 3.639] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 3.639] Build Date: 10 December 2014 02:34:24PM
[ 3.639]
[ 3.639] Current version of pixman: 0.32.6
[ 3.639] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.639] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.639] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:47:26 2014
[ 3.645] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.649] (==) No Layout section. Using the first Screen section.
[ 3.649] (==) No screen section available. Using defaults.
[ 3.649] (**) |-->Screen "Default Screen Section" (0)
[ 3.649] (**) | |-->Monitor "<default monitor>"
[ 3.650] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.650] (==) Automatically adding devices
[ 3.650] (==) Automatically enabling devices
[ 3.650] (==) Automatically adding GPU devices
[ 3.658] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.658] Entry deleted from font path.
[ 3.659] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.659] Entry deleted from font path.
[ 3.659] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.660] Entry deleted from font path.
[ 3.660] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.660] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.660] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.660] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.660] (II) Loader magic: 0x818d80
[ 3.660] (II) Module ABI versions:
[ 3.660] X.Org ANSI C Emulation: 0.4
[ 3.660] X.Org Video Driver: 18.0
[ 3.660] X.Org XInput driver : 21.0
[ 3.660] X.Org Server Extension : 8.0
[ 3.662] (EE) systemd-logind: failed to get session: PID 267 does not belong to any known session
[ 3.663] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.663] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.664] (II) LoadModule: "glx"
[ 3.675] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.767] (II) Module glx: vendor="NVIDIA Corporation"
[ 3.767] compiled for 4.0.2, module version = 1.0.0
[ 3.767] Module class: X.Org Server Extension
[ 3.768] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 3.769] (==) Matched nouveau as autoconfigured driver 0
[ 3.769] (==) Matched nv as autoconfigured driver 1
[ 3.769] (==) Matched modesetting as autoconfigured driver 2
[ 3.769] (==) Matched fbdev as autoconfigured driver 3
[ 3.769] (==) Matched vesa as autoconfigured driver 4
[ 3.769] (==) Assigned the driver to the xf86ConfigLayout
[ 3.769] (II) LoadModule: "nouveau"
[ 3.769] (WW) Warning, couldn't open module nouveau
[ 3.769] (II) UnloadModule: "nouveau"
[ 3.769] (II) Unloading nouveau
[ 3.769] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 3.769] (II) LoadModule: "nv"
[ 3.769] (WW) Warning, couldn't open module nv
[ 3.769] (II) UnloadModule: "nv"
[ 3.769] (II) Unloading nv
[ 3.769] (EE) Failed to load module "nv" (module does not exist, 0)
[ 3.769] (II) LoadModule: "modesetting"
[ 3.769] (WW) Warning, couldn't open module modesetting
[ 3.769] (II) UnloadModule: "modesetting"
[ 3.769] (II) Unloading modesetting
[ 3.769] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.769] (II) LoadModule: "fbdev"
[ 3.769] (WW) Warning, couldn't open module fbdev
[ 3.769] (II) UnloadModule: "fbdev"
[ 3.769] (II) Unloading fbdev
[ 3.769] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.769] (II) LoadModule: "vesa"
[ 3.770] (WW) Warning, couldn't open module vesa
[ 3.770] (II) UnloadModule: "vesa"
[ 3.770] (II) Unloading vesa
[ 3.770] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.770] (EE) No drivers available.
[ 3.770] (EE)
Fatal server error:
[ 3.770] (EE) no screens found(EE)
[ 3.770] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3.770] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 3.770] (EE)
Which looks like it loads my nvidia driver, but then just decides not to use it for some reason... After I restart kdm, it seems to use the driver fine:
[ 78.897]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 78.897]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 78.897] X Protocol Version 11, Revision 0
[ 78.897] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 78.897] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 78.897] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 78.897] Build Date: 10 December 2014 02:34:24PM
[ 78.897]
[ 78.897] Current version of pixman: 0.32.6
[ 78.897] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.897] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.897] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:48:38 2014
[ 78.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.897] (==) No Layout section. Using the first Screen section.
[ 78.897] (==) No screen section available. Using defaults.
[ 78.897] (**) |-->Screen "Default Screen Section" (0)
[ 78.897] (**) | |-->Monitor "<default monitor>"
[ 78.898] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.898] (==) Automatically adding devices
[ 78.898] (==) Automatically enabling devices
[ 78.898] (==) Automatically adding GPU devices
[ 78.898] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 78.898] Entry deleted from font path.
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 78.898] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 78.898] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.898] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.898] (II) Loader magic: 0x818d80
[ 78.898] (II) Module ABI versions:
[ 78.898] X.Org ANSI C Emulation: 0.4
[ 78.898] X.Org Video Driver: 18.0
[ 78.898] X.Org XInput driver : 21.0
[ 78.898] X.Org Server Extension : 8.0
[ 78.900] (EE) systemd-logind: failed to get session: PID 542 does not belong to any known session
[ 78.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.901] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 78.901] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.901] (II) LoadModule: "glx"
[ 78.902] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.913] (II) Module glx: vendor="NVIDIA Corporation"
[ 78.913] compiled for 4.0.2, module version = 1.0.0
[ 78.913] Module class: X.Org Server Extension
[ 78.913] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
[ 78.914] (==) Matched nvidia as autoconfigured driver 0
[ 78.914] (==) Matched nouveau as autoconfigured driver 1
[ 78.914] (==) Matched nv as autoconfigured driver 2
[ 78.914] (==) Matched nouveau as autoconfigured driver 3
[ 78.914] (==) Matched nv as autoconfigured driver 4
[ 78.914] (==) Matched modesetting as autoconfigured driver 5
[ 78.914] (==) Matched fbdev as autoconfigured driver 6
[ 78.914] (==) Matched vesa as autoconfigured driver 7
[ 78.914] (==) Assigned the driver to the xf86ConfigLayout
[ 78.914] (II) LoadModule: "nvidia"
[ 78.914] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 78.920] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 78.920] compiled for 4.0.2, module version = 1.0.0
[ 78.920] Module class: X.Org Video Driver
[ 78.920] (II) LoadModule: "nouveau"
[ 78.921] (WW) Warning, couldn't open module nouveau
[ 78.921] (II) UnloadModule: "nouveau"
[ 78.921] (II) Unloading nouveau
[ 78.921] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 78.921] (II) LoadModule: "nv"
[ 78.921] (WW) Warning, couldn't open module nv
[ 78.921] (II) UnloadModule: "nv"
[ 78.921] (II) Unloading nv
[ 78.921] (EE) Failed to load module "nv" (module does not exist, 0)
[ 78.921] (II) LoadModule: "modesetting"
[ 78.921] (WW) Warning, couldn't open module modesetting
[ 78.921] (II) UnloadModule: "modesetting"
[ 78.921] (II) Unloading modesetting
[ 78.921] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 78.921] (II) LoadModule: "fbdev"
[ 78.922] (WW) Warning, couldn't open module fbdev
[ 78.922] (II) UnloadModule: "fbdev"
[ 78.922] (II) Unloading fbdev
[ 78.922] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 78.922] (II) LoadModule: "vesa"
[ 78.922] (WW) Warning, couldn't open module vesa
[ 78.922] (II) UnloadModule: "vesa"
[ 78.922] (II) Unloading vesa
[ 78.922] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 78.922] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 78.922] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 78.922] (++) using VT number 7
[ 78.935] (II) Loading sub module "fb"
[ 78.935] (II) LoadModule: "fb"
[ 78.935] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 78.936] (II) Module fb: vendor="X.Org Foundation"
[ 78.936] compiled for 1.16.2.901, module version = 1.0.0
[ 78.936] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.936] (II) Loading sub module "wfb"
[ 78.936] (II) LoadModule: "wfb"
[ 78.936] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 78.937] (II) Module wfb: vendor="X.Org Foundation"
[ 78.937] compiled for 1.16.2.901, module version = 1.0.0
[ 78.937] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.937] (II) Loading sub module "ramdac"
[ 78.937] (II) LoadModule: "ramdac"
[ 78.937] (II) Module "ramdac" already built-in
[ 78.939] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 78.939] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 78.939] (==) NVIDIA(0): RGB weight 888
[ 78.939] (==) NVIDIA(0): Default visual is TrueColor
[ 78.939] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 78.940] (**) NVIDIA(0): Enabling 2D acceleration
[ 79.610] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 79.610] (II) NVIDIA(0): 3D Vision stereo.
[ 79.610] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 79.612] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670MX (GK104) at PCI:1:0:0 (GPU-0)
[ 79.612] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 79.612] (--) NVIDIA(0): VideoBIOS: 80.04.67.00.06
[ 79.612] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 79.616] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670MX at PCI:1:0:0
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0) (boot, connected)
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[ 79.616] (--) NVIDIA(0): DFP-2
[ 79.616] (--) NVIDIA(0): DFP-3
[ 79.616] (--) NVIDIA(0): DFP-4
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal LVDS
[ 79.616] (--) NVIDIA(GPU-0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 79.616] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 79.616] (**) NVIDIA(0): has been enabled on all display devices.)
[ 79.618] (==) NVIDIA(0):
[ 79.618] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 79.618] (==) NVIDIA(0): will be used as the requested mode.
[ 79.618] (==) NVIDIA(0):
[ 79.619] (II) NVIDIA(0): Validated MetaModes:
[ 79.619] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 79.619] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
[ 80.144] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 80.144] (--) NVIDIA(0): option
[ 80.144] (--) Depth 24 pixmap format is 32 bpp
[ 80.144] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 80.144] (II) NVIDIA: access.
[ 80.150] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 80.150] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 80.150] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 80.150] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 80.150] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 80.150] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 80.150] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 80.150] (II) NVIDIA(0): Config Options in the README.
[ 80.155] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 80.532] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 80.532] (==) NVIDIA(0): Backing store enabled
[ 80.532] (==) NVIDIA(0): Silken mouse enabled
[ 80.533] (==) NVIDIA(0): DPMS enabled
[ 80.533] (II) Loading sub module "dri2"
[ 80.533] (II) LoadModule: "dri2"
[ 80.533] (II) Module "dri2" already built-in
[ 80.533] (II) NVIDIA(0): [DRI2] Setup complete
[ 80.533] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 80.533] (--) RandR disabled
[ 80.539] (II) Initializing extension GLX
[ 80.605] (II) config/udev: Adding input device Power Button (/dev/input/event14)
[ 80.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.605] (II) LoadModule: "evdev"
[ 80.606] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 80.607] (II) Module evdev: vendor="X.Org Foundation"
[ 80.607] compiled for 1.16.2, module version = 2.9.1
[ 80.607] Module class: X.Org XInput Driver
[ 80.607] ABI class: X.Org XInput driver, version 21.0
[ 80.607] (II) Using input driver 'evdev' for 'Power Button'
[ 80.607] (**) Power Button: always reports core events
[ 80.607] (**) evdev: Power Button: Device: "/dev/input/event14"
[ 80.608] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.608] (--) evdev: Power Button: Found keys
[ 80.608] (II) evdev: Power Button: Configuring as keyboard
[ 80.608] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input18/event14"
[ 80.608] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.608] (**) Option "xkb_rules" "evdev"
[ 80.608] (**) Option "xkb_model" "pc104"
[ 80.608] (**) Option "xkb_layout" "us"
[ 80.635] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 80.635] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.635] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.635] (**) Video Bus: always reports core events
[ 80.635] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 80.635] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.635] (--) evdev: Video Bus: Found keys
[ 80.635] (II) evdev: Video Bus: Configuring as keyboard
[ 80.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input19/event15"
[ 80.635] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.635] (**) Option "xkb_rules" "evdev"
[ 80.635] (**) Option "xkb_model" "pc104"
[ 80.635] (**) Option "xkb_layout" "us"
[ 80.636] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 80.636] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.636] (II) Using input driver 'evdev' for 'Power Button'
[ 80.636] (**) Power Button: always reports core events
[ 80.636] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 80.636] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.636] (--) evdev: Power Button: Found keys
[ 80.636] (II) evdev: Power Button: Configuring as keyboard
[ 80.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input17/event13"
[ 80.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 80.636] (**) Option "xkb_rules" "evdev"
[ 80.636] (**) Option "xkb_model" "pc104"
[ 80.636] (**) Option "xkb_layout" "us"
[ 80.637] (II) config/udev: Adding input device Lid Switch (/dev/input/event11)
[ 80.637] (II) No input driver specified, ignoring this device.
[ 80.637] (II) This device may have been added with another device file.
[ 80.637] (II) config/udev: Adding input device Sleep Button (/dev/input/event12)
[ 80.637] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.637] (II) Using input driver 'evdev' for 'Sleep Button'
[ 80.637] (**) Sleep Button: always reports core events
[ 80.637] (**) evdev: Sleep Button: Device: "/dev/input/event12"
[ 80.637] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 80.637] (--) evdev: Sleep Button: Found keys
[ 80.637] (II) evdev: Sleep Button: Configuring as keyboard
[ 80.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16/event12"
[ 80.637] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 80.637] (**) Option "xkb_rules" "evdev"
[ 80.637] (**) Option "xkb_model" "pc104"
[ 80.637] (**) Option "xkb_layout" "us"
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.639] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event3)
[ 80.639] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'LOGITECH G110 G-keys'
[ 80.639] (**) LOGITECH G110 G-keys: always reports core events
[ 80.639] (**) evdev: LOGITECH G110 G-keys: Device: "/dev/input/event3"
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Vendor 0x46d Product 0xc22b
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Found keys
[ 80.639] (II) evdev: LOGITECH G110 G-keys: Configuring as keyboard
[ 80.639] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.1/3-4.1.1:1.0/0003:046D:C22B.0003/input/input7/event3"
[ 80.639] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 10)
[ 80.639] (**) Option "xkb_rules" "evdev"
[ 80.639] (**) Option "xkb_model" "pc104"
[ 80.639] (**) Option "xkb_layout" "us"
[ 80.639] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event4)
[ 80.639] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.639] (**) Gaming Keyboard G110: always reports core events
[ 80.639] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event4"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.0/0003:046D:C22A.0004/input/input8/event4"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.640] (**) Option "xkb_layout" "us"
[ 80.640] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event5)
[ 80.640] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.640] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.640] (**) Gaming Keyboard G110: always reports core events
[ 80.640] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event5"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.1/0003:046D:C22A.0005/input/input9/event5"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.641] (**) Option "xkb_layout" "us"
[ 80.641] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event1)
[ 80.641] (**) Razer Razer Lachesis: Applying InputClass "evdev pointer catchall"
[ 80.641] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.641] (**) Razer Razer Lachesis: always reports core events
[ 80.641] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event1"
[ 80.641] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.641] (--) evdev: Razer Razer Lachesis: Found 12 mouse buttons
[ 80.641] (--) evdev: Razer Razer Lachesis: Found scroll wheel(s)
[ 80.641] (--) evdev: Razer Razer Lachesis: Found relative axes
[ 80.641] (--) evdev: Razer Razer Lachesis: Found x and y relative axes
[ 80.641] (II) evdev: Razer Razer Lachesis: Configuring as mouse
[ 80.641] (II) evdev: Razer Razer Lachesis: Adding scrollwheel support
[ 80.641] (**) evdev: Razer Razer Lachesis: YAxisMapping: buttons 4 and 5
[ 80.641] (**) evdev: Razer Razer Lachesis: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:1532:000C.0001/input/input5/event1"
[ 80.641] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: MOUSE, id 13)
[ 80.642] (II) evdev: Razer Razer Lachesis: initialized for relative axes.
[ 80.642] (**) Razer Razer Lachesis: (accel) keeping acceleration scheme 1
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration profile 0
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration factor: 2.000
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration threshold: 4
[ 80.642] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/mouse0)
[ 80.642] (II) No input driver specified, ignoring this device.
[ 80.642] (II) This device may have been added with another device file.
[ 80.643] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event2)
[ 80.643] (**) Razer Razer Lachesis: Applying InputClass "evdev keyboard catchall"
[ 80.643] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.643] (**) Razer Razer Lachesis: always reports core events
[ 80.643] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event2"
[ 80.643] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.643] (--) evdev: Razer Razer Lachesis: Found keys
[ 80.643] (II) evdev: Razer Razer Lachesis: Configuring as keyboard
[ 80.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.1/0003:1532:000C.0002/input/input6/event2"
[ 80.643] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: KEYBOARD, id 14)
[ 80.643] (**) Option "xkb_rules" "evdev"
[ 80.643] (**) Option "xkb_model" "pc104"
[ 80.643] (**) Option "xkb_layout" "us"
[ 80.643] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 80.643] (II) No input driver specified, ignoring this device.
[ 80.643] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 80.645] (II) No input driver specified, ignoring this device.
[ 80.645] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event17)
[ 80.645] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 80.645] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 80.645] (**) BisonCam, NB Pro: always reports core events
[ 80.645] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event17"
[ 80.645] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x512
[ 80.645] (--) evdev: BisonCam, NB Pro: Found keys
[ 80.645] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 80.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input23/event17"
[ 80.645] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 15)
[ 80.645] (**) Option "xkb_rules" "evdev"
[ 80.645] (**) Option "xkb_model" "pc104"
[ 80.645] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.646] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 80.646] (**) Option "xkb_rules" "evdev"
[ 80.646] (**) Option "xkb_model" "pc104"
[ 80.646] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event20)
[ 80.646] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 80.647] (II) LoadModule: "synaptics"
[ 80.647] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.647] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.647] compiled for 1.16.0, module version = 1.8.1
[ 80.647] Module class: X.Org XInput Driver
[ 80.647] ABI class: X.Org XInput driver, version 21.0
[ 80.647] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 80.647] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.647] (**) Option "Device" "/dev/input/event20"
[ 80.756] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5662 (res 42)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4660 (res 47)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 80.757] (**) Option "TapButton1" "1"
[ 80.757] (**) Option "TapButton2" "2"
[ 80.757] (**) Option "TapButton3" "3"
[ 80.757] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input22/event20"
[ 80.810] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 80.810] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.811] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 80.811] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.811] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[ 80.811] (II) No input driver specified, ignoring this device.
[ 80.811] (II) This device may have been added with another device file.
[ 88.265] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.265] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.282] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.282] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.291] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: 1680x1050_60_0 @1680x1050 +1920+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 89.221] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 89.221] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 90.639] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 90.639] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93.745] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 93.745] (II) NVIDIA(GPU-0): 3D Vision stereo.
Notably, the following lines appear in the working case, but not the broken case:
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
Does anyone know what might be going on here?
Last edited by straemer (2014-12-20 13:03:58)

Hmmmm, that doesn't seem to be the issue. I have a nvidia geforce gtx 670mx. The nvidia website does link me to the 340xx driver for that card, but downgrading to that version still has the same issue. I suspect the issue is in Xorg, since it seems to load the module, but then decides it doesn't have a driver to run for some reason.

"Failed to load the NVIDIA kernel module" [SOLVED]

Hi, I've just done a fresh install of Arch64 and I'm having problems with NVIDIA driver from the repo.
xorg, xf86-input-evdev -- INSTALLED
nvidia, nvidia-utils, lib32-nvidia-utils -- INSTALLED (version 256.44-1)
nouveau -- NOT INSTALLED
here goes the log files:
uname -a
Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ AuthenticAMD GNU/Linux
lspci | grep VGA
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2)
/etc/X11/xorg.conf (generated when I ran "nvidia-xconfig"):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 ([email protected]) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
/var/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 142.066]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 142.084] X Protocol Version 11, Revision 0
[ 142.091] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 142.098] Current Operating System: Linux desktop 2.6.32-lts #1 SMP Wed Aug 4 22:02:05 UTC 2010 x86_64
[ 142.106] Kernel command line: BOOT_IMAGE=/vmlinuz26-lts root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 142.116] Build Date: 21 June 2010 12:01:49PM
[ 142.125]
[ 142.135] Current version of pixman: 0.18.2
[ 142.145] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 142.167] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 142.204] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 21:15:02 2010
[ 142.218] (==) Using config file: "/etc/X11/xorg.conf"
[ 142.232] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 142.246] (==) ServerLayout "Layout0"
[ 142.246] (**) |-->Screen "Screen0" (0)
[ 142.246] (**) | |-->Monitor "Monitor0"
[ 142.246] (**) | |-->Device "Device0"
[ 142.246] (**) |-->Input Device "Keyboard0"
[ 142.246] (**) |-->Input Device "Mouse0"
[ 142.246] (==) Automatically adding devices
[ 142.246] (==) Automatically enabling devices
[ 142.246] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 142.246] Entry deleted from font path.
[ 142.246] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 142.246] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 142.246] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 142.246] (WW) Disabling Keyboard0
[ 142.246] (WW) Disabling Mouse0
[ 142.246] (II) Loader magic: 0x7ce880
[ 142.246] (II) Module ABI versions:
[ 142.246] X.Org ANSI C Emulation: 0.4
[ 142.246] X.Org Video Driver: 7.0
[ 142.246] X.Org XInput driver : 9.0
[ 142.246] X.Org Server Extension : 3.0
[ 142.252] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 142.252] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 142.252] (II) LoadModule: "extmod"
[ 142.252] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 142.253] (II) Module extmod: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension MIT-SCREEN-SAVER
[ 142.253] (II) Loading extension XFree86-VidModeExtension
[ 142.253] (II) Loading extension XFree86-DGA
[ 142.253] (II) Loading extension DPMS
[ 142.253] (II) Loading extension XVideo
[ 142.253] (II) Loading extension XVideo-MotionCompensation
[ 142.253] (II) Loading extension X-Resource
[ 142.253] (II) LoadModule: "dbe"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 142.253] (II) Module dbe: vendor="X.Org Foundation"
[ 142.253] compiled for 1.8.1.902, module version = 1.0.0
[ 142.253] Module class: X.Org Server Extension
[ 142.253] ABI class: X.Org Server Extension, version 3.0
[ 142.253] (II) Loading extension DOUBLE-BUFFER
[ 142.253] (II) LoadModule: "glx"
[ 142.253] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 142.269] (II) Module glx: vendor="NVIDIA Corporation"
[ 142.269] compiled for 4.0.2, module version = 1.0.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 142.269] (II) Loading extension GLX
[ 142.269] (II) LoadModule: "record"
[ 142.269] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 142.269] (II) Module record: vendor="X.Org Foundation"
[ 142.269] compiled for 1.8.1.902, module version = 1.13.0
[ 142.269] Module class: X.Org Server Extension
[ 142.269] ABI class: X.Org Server Extension, version 3.0
[ 142.269] (II) Loading extension RECORD
[ 142.269] (II) LoadModule: "dri"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 142.270] (II) Module dri: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.0.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension XFree86-DRI
[ 142.270] (II) LoadModule: "dri2"
[ 142.270] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 142.270] (II) Module dri2: vendor="X.Org Foundation"
[ 142.270] compiled for 1.8.1.902, module version = 1.2.0
[ 142.270] ABI class: X.Org Server Extension, version 3.0
[ 142.270] (II) Loading extension DRI2
[ 142.270] (II) LoadModule: "nvidia"
[ 142.270] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.271] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 142.271] compiled for 4.0.2, module version = 1.0.0
[ 142.271] Module class: X.Org Video Driver
[ 142.288] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 142.303] (EE) NVIDIA: system's kernel log for additional error messages.
[ 142.319] (II) UnloadModule: "nvidia"
[ 142.319] (II) Unloading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 142.319] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 142.335] (EE) No drivers available.
[ 142.351]
Fatal server error:
[ 142.384] no screens found
[ 142.400]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 142.469] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 142.488]
find / -name "*nvidia*"
/lib/modules/2.6.34-ARCH/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia/nvidiafb.ko
/lib/modules/2.6.34-ARCH/kernel/drivers/video/nvidia.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/backlight/mbp_nvidia_bl.ko
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia
/lib/modules/2.6.32-lts/kernel/drivers/video/nvidia/nvidiafb.ko
/etc/OpenCL/vendors/nvidia.icd
/etc/X11/xorg.conf.d/20-nvidia.conf
/usr/lib/libnvidia-cfg.so.1
/usr/lib/libnvidia-glcore.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so.256.44
/usr/lib/vdpau/libvdpau_nvidia.so
/usr/lib/vdpau/libvdpau_nvidia.so.1
/usr/lib/tls/libnvidia-tls.so.256.44
/usr/lib/libnvidia-cfg.so.256.44
/usr/lib/libnvidia-cfg.so
/usr/lib/libnvidia-tls.so.256.44
/usr/lib/xorg/modules/drivers/nvidia_drv.so
/usr/lib/libnvidia-compiler.so.256.44
/usr/share/licenses/nvidia
/usr/share/licenses/lib32-nvidia-utils
/usr/share/licenses/nvidia-utils
/usr/share/applications/nvidia-settings.desktop
/usr/share/man/man1/nvidia-smi.1.gz
/usr/share/man/man1/nvidia-settings.1.gz
/usr/share/man/man1/nvidia-xconfig.1.gz
/usr/share/doc/nvidia
/usr/share/doc/nvidia-utils
/usr/share/pixmaps/nvidia-settings.png
/usr/bin/nvidia-bug-report.sh
/usr/bin/nvidia-settings
/usr/bin/nvidia-smi
/usr/bin/nvidia-xconfig
/usr/src/linux-2.6.34-ARCH/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia
/usr/src/linux-2.6.34-ARCH/include/config/fb/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/backlight/mbp/nvidia.h
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia
/usr/src/linux-2.6.32-lts/include/config/fb/nvidia.h
/opt/lib32/usr/lib/libvdpau_nvidia.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so
/opt/lib32/usr/lib/libnvidia-glcore.so.256.44
/opt/lib32/usr/lib/tls/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libvdpau_nvidia.so.1
/opt/lib32/usr/lib/libnvidia-tls.so.256.44
/opt/lib32/usr/lib/libnvidia-compiler.so.256.44
/var/lib/pacman/local/nvidia-256.44-1
/var/lib/pacman/local/nvidia-utils-256.44-1
/var/lib/pacman/local/lib32-nvidia-utils-256.44-1
/var/lib/pacman/sync/extra/nvidia-173xx-utils-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-173xx-173.14.27-1
/var/lib/pacman/sync/extra/nvidia-256.44-1
/var/lib/pacman/sync/extra/nvidia-utils-256.44-1
/var/lib/pacman/sync/community/nvidia-cg-toolkit-2.2-4
/var/lib/pacman/sync/community/lib32-nvidia-utils-256.44-1
/var/cache/pacman/pkg/nvidia-utils-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/nvidia-256.44-1-x86_64.pkg.tar.xz
/var/cache/pacman/pkg/lib32-nvidia-utils-256.44-1-x86_64.pkg.tar.xz
Do you have any idea of what should be done to fix it? I don't want to use NVIDIA driver from their site neither nouveau, I want to use the one from the repo. If you know how to solve it, instead of only pointing the solution, also tell why this is happening, it will help me and other people with the same problem too!
If you need additional information please ask me.
Thanks!!
Last edited by ILoveJapaneseGirls (2010-08-07 03:09:55)

karol, I'll try to add the section you wrote to the xorg.conf, but first I want to show the log of the crash:
/var/log/Xorg.0.log
[ 69.813]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 69.858]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 69.882] X Protocol Version 11, Revision 0
[ 69.890] Build Operating System: Linux 2.6.34-ARCH x86_64
[ 69.899] Current Operating System: Linux desktop 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:31:56 CEST 2010 x86_64
[ 69.910] Kernel command line: BOOT_IMAGE=/vmlinuz26 root=/dev/disk/by-uuid/9eb5ef94-284b-4b7e-b824-5c6b0f329fe8 ro quiet
[ 69.921] Build Date: 21 June 2010 12:01:49PM
[ 69.933]
[ 69.944] Current version of pixman: 0.18.2
[ 69.957] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 69.982] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 70.025] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Aug 6 22:35:08 2010
[ 70.057] (==) Using config file: "/etc/X11/xorg.conf"
[ 70.072] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 70.117] (==) ServerLayout "Layout0"
[ 70.117] (**) |-->Screen "Screen0" (0)
[ 70.117] (**) | |-->Monitor "Monitor0"
[ 70.117] (**) | |-->Device "Device0"
[ 70.117] (**) |-->Input Device "Keyboard0"
[ 70.117] (**) |-->Input Device "Mouse0"
[ 70.117] (==) Automatically adding devices
[ 70.118] (==) Automatically enabling devices
[ 70.145] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.145] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 70.145] Entry deleted from font path.
[ 70.168] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 70.168] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 70.168] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 70.168] (WW) Disabling Keyboard0
[ 70.168] (WW) Disabling Mouse0
[ 70.168] (II) Loader magic: 0x7ce880
[ 70.168] (II) Module ABI versions:
[ 70.168] X.Org ANSI C Emulation: 0.4
[ 70.168] X.Org Video Driver: 7.0
[ 70.168] X.Org XInput driver : 9.0
[ 70.168] X.Org Server Extension : 3.0
[ 70.185] (--) PCI:*(0:0:5:0) 10de:0240:1043:81cd nVidia Corporation C51PV [GeForce 6150] rev 162, Mem @ 0xfc000000/16777216, 0xd0000000/268435456, 0xfb000000/16777216, BIOS @ 0x????????/131072
[ 70.186] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 70.186] (II) LoadModule: "extmod"
[ 70.200] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 70.211] (II) Module extmod: vendor="X.Org Foundation"
[ 70.211] compiled for 1.8.1.902, module version = 1.0.0
[ 70.211] Module class: X.Org Server Extension
[ 70.211] ABI class: X.Org Server Extension, version 3.0
[ 70.211] (II) Loading extension MIT-SCREEN-SAVER
[ 70.211] (II) Loading extension XFree86-VidModeExtension
[ 70.211] (II) Loading extension XFree86-DGA
[ 70.211] (II) Loading extension DPMS
[ 70.211] (II) Loading extension XVideo
[ 70.211] (II) Loading extension XVideo-MotionCompensation
[ 70.211] (II) Loading extension X-Resource
[ 70.211] (II) LoadModule: "dbe"
[ 70.211] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 70.218] (II) Module dbe: vendor="X.Org Foundation"
[ 70.218] compiled for 1.8.1.902, module version = 1.0.0
[ 70.219] Module class: X.Org Server Extension
[ 70.219] ABI class: X.Org Server Extension, version 3.0
[ 70.219] (II) Loading extension DOUBLE-BUFFER
[ 70.219] (II) LoadModule: "glx"
[ 70.219] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 71.100] (II) Module glx: vendor="NVIDIA Corporation"
[ 71.111] compiled for 4.0.2, module version = 1.0.0
[ 71.111] Module class: X.Org Server Extension
[ 71.111] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:47:53 PDT 2010
[ 71.111] (II) Loading extension GLX
[ 71.111] (II) LoadModule: "record"
[ 71.111] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 71.125] (II) Module record: vendor="X.Org Foundation"
[ 71.125] compiled for 1.8.1.902, module version = 1.13.0
[ 71.125] Module class: X.Org Server Extension
[ 71.125] ABI class: X.Org Server Extension, version 3.0
[ 71.125] (II) Loading extension RECORD
[ 71.125] (II) LoadModule: "dri"
[ 71.126] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 71.140] (II) Module dri: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.0.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension XFree86-DRI
[ 71.140] (II) LoadModule: "dri2"
[ 71.140] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 71.140] (II) Module dri2: vendor="X.Org Foundation"
[ 71.140] compiled for 1.8.1.902, module version = 1.2.0
[ 71.140] ABI class: X.Org Server Extension, version 3.0
[ 71.140] (II) Loading extension DRI2
[ 71.140] (II) LoadModule: "nvidia"
[ 71.141] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 71.187] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 71.189] compiled for 4.0.2, module version = 1.0.0
[ 71.189] Module class: X.Org Video Driver
[ 71.207] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:24:51 PDT 2010
[ 71.207] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 71.207] (--) using VT number 7
[ 71.260] (II) Primary Device is: PCI 00@00:05:0
[ 71.269] (II) Loading sub module "fb"
[ 71.269] (II) LoadModule: "fb"
[ 71.269] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 71.281] (II) Module fb: vendor="X.Org Foundation"
[ 71.281] compiled for 1.8.1.902, module version = 1.0.0
[ 71.281] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.281] (II) Loading sub module "wfb"
[ 71.281] (II) LoadModule: "wfb"
[ 71.281] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 71.289] (II) Module wfb: vendor="X.Org Foundation"
[ 71.289] compiled for 1.8.1.902, module version = 1.0.0
[ 71.289] ABI class: X.Org ANSI C Emulation, version 0.4
[ 71.289] (II) Loading sub module "ramdac"
[ 71.289] (II) LoadModule: "ramdac"
[ 71.289] (II) Module "ramdac" already built-in
[ 71.309] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 71.309] (==) NVIDIA(0): RGB weight 888
[ 71.309] (==) NVIDIA(0): Default visual is TrueColor
[ 71.309] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 71.309] (**) NVIDIA(0): Enabling RENDER acceleration
[ 71.309] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 71.309] (II) NVIDIA(0): enabled.
[ 72.040] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 (C51) at PCI:0:5:0 (GPU-0)
[ 72.040] (--) NVIDIA(0): Memory: 262144 kBytes
[ 72.040] (--) NVIDIA(0): VideoBIOS: 05.51.22.33.07
[ 72.040] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 72.040] (--) NVIDIA(0): Connected display device(s) on GeForce 6150 at PCI:0:5:0:
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0)
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): 310.0 MHz maximum pixel clock
[ 72.040] (--) NVIDIA(0): LG Electronics L196WTQ (DFP-0): Internal Dual Link TMDS
[ 72.044] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 72.044] (==) NVIDIA(0):
[ 72.044] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 72.044] (==) NVIDIA(0): will be used as the requested mode.
[ 72.044] (==) NVIDIA(0):
[ 72.044] (II) NVIDIA(0): Validated modes:
[ 72.044] (II) NVIDIA(0): "nvidia-auto-select"
[ 72.044] (II) NVIDIA(0): Virtual screen size determined to be 1440 x 900
[ 72.045] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[ 72.045] (--) NVIDIA(0): option
[ 72.045] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
[ 72.045] (--) Depth 24 pixmap format is 32 bpp
[ 72.052] (II) NVIDIA(0): Initialized GPU GART.
[ 72.055] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 72.055] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 72.055] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 72.055] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 72.055] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 72.055] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 72.055] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 72.055] (II) NVIDIA(0): Config Options in the README.
[ 72.056] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 72.178] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 72.178] (EE) NVIDIA(0): *** Aborting ***
[ 72.178]
Fatal server error:
[ 72.178] AddScreen/ScreenInit failed for driver 0
[ 72.178]
[ 72.178]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 72.178] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 72.178]
As it's mentioned, it may be a problem of ACPI.
About the lib32-nvidia-utils, I just installed because it's written in the wiki http://wiki.archlinux.org/index.php/NVIDIA#Installing: "Note: On 64 bit systems, For 32-bit programs to take advantage of nvidia-utils you must also install the equivalent lib32 package (for example lib32-nvidia-utils)."

Newest version of Firefox 3.6.4 build 3 won't allow Norton Confidential toolbar for anti-plishing to work as before. It cannot load. Help plese.

Every time Firefox 4.6.4 build 3 open, Norton Confidential (part of Norton Internet Security 4( cannot load it;s toolbar as before (last version of 3.6.4 work fine). So Norton Confidential ask to load. If click yes, Norton Confidential fail to load and ask me to get a newest version of Firefox. So Norton Confidential cannot do anti-plishing protection now
== This happened ==
Every time Firefox opened
== I use version 3.6.4 pre 3 ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

I tried to add the norton toolbar of norton internet security 2009 in the firefox 3.6.2 but the toolbar didn't work!If i'll update the firefox in 3.6.4 as the official mozilla website recommends, the toolbar will works?At the moment i use the firefox 3.5.10 and the norton toolbar works perfectly!
Thhank you

Inventory load failed... OPatch cannot load inventory for the given Oracle Home.OPatch failed with error code = 73

Hi,
I am going to apply bundle patch and my oracle database is 11.2.0.2 and platform Microsoft Windows x86. As per the read me file Oracle recommends that to use OPatch utility release 11.2.0.1.3 or later.To check the accessibility to the inventory i use %ORACLE_HOME%/OPatch/opatch lsinventory command.
It ended up with giving below details.
Invoking OPatch 11.2.0.1.1
OPatch could not create/open history file for writing : ***my oracle home path***\cfgtoollogs\opatch\opatch_history.txt
**oracle_home***\cfgtoollogs\opatch\opatch_history.txt (Access is denied)
Oracle Interim Patch Installer version 11.2.0.1.1
Copyright (c) 2009, Oracle Corporation. All rights reserved.
OPatch could not open log file, logging will not be possible
Oracle Home       : *****
Central Inventory : C:\Program Files\Oracle\Inventory
   from           : n/a
OPatch version    : 11.2.0.1.1
OUI version       : 11.2.0.2.0
OUI location      : **ORACLE_HOME***\oui
Log file location : **ORACLE_HOME**\cfgtoollogs\opatch\opatch2015-04-09_16-27-49PM.log
Patch history file: **ORACLE_HOME**\cfgtoollogs\opatch\opatch_history.txt
Inventory load failed... OPatch cannot load inventory for the given Oracle Home.
LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt
OPatch failed with error code = 73
Can anyone please help me to solve this?
Do I need to install latest opatch utility?

Hi,
this error message " LsInventorySession failed: LsInventory cannot create the log directory **ORACLE_HOME***\cfgtoollogs\opatch\lsinv\lsinventory2015-04-
09_16-27-49PM.txt "
indicates that you have permission issue with your file systems : ORACLE_HOME/cfgtoollogs/opatch
double check the owner of this file system.
Regards,

Emca failed with "exec(): 0509-036 Cannot load program "

Hello all,
I try to configure dbconsole on on 10.2.0.4 an AIX 5.3.
It failed with this strange error :
Apr 22, 2011 2:43:25 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: exec(): 0509-036 Cannot load program oracle because of the following errors:
0509-130 Symbol resolution failed for /applics/ora10201/lib/libjox10.a[shr.o] because:
0509-136 Symbol ksptch_check (number 239) is not exported from
dependent module oracle.
0509-136 Symbol skptch_lcl_updnum (number 339) is not exported from
dependent module oracle.
0509-192 Examine .loader section symbols with the
'dump -Tv' command.
Couldn't connect to the db. at /applics/ora10204/sysman/admin/scripts/emca/emcaDbUtil.pl line 85
I did "relink all", but the message still the same and of course spend a lot of time on google.com without success.
Does any one have any idea ?
Thanks in advance.

Goog remark of AllYourDataBase ! very good ! Why I didn't remark it by myself !!
Thanks also for the other repliers ...
But, I don't understand why emca call "/applics/ora10201/perl/bin/per" unstead "/applics/ora10204/perl/bin/perl" which exists ...
No vairables points on 10.0.
# env | grep 10201
--> No lines returned
# env | grep 10204 | wc -l
19
And my LIBPATH, LD_LIBRARY_PATH and PATH seems corrects :
LIBPATH=/applics/ora10204/lib:
LD_LIBRARY_PATH=/applics/ora10204/lib:/applics/ora10204/ctx/lib:/usr/lib:
PATH=/applics/ora10204/bin:/applics/ora10204/ctx/bin:/usr/bin:/etc:/usr/sbin:/usr/ucb:/applics/ora10204/bin:/usr/bin/X11:/sbin:/expl/adm/shl:/applics/ora10204/OPatch:.:/usr/bin:/etc:/usr/sbin:/usr/ucb:/usr/bin/X11:/sbin:/usr/lbin
LOCPATH=/usr/lib/nls/loc
NLSPATH=/usr/lib/nls/msg/%L/%N:/usr/lib/nls/msg/%L/%N.cat
Why emca call perl from 10.2.0.1 software and how can I influence it to call it from the right directory 10.2.0.4
I continue to search by myself also.
Thanks of all.

[SOLVED] Building perl failed cannot load libperl.so

Similar Messages

Maybe you are looking for