[SOLVED] Buttons are missing in the titlebar with gtk-window-decorator
Hi, everyone.
Recently, I'd tried compiz as WM with gnome 3 in fallback mode. All work quiet good, but there is one thing, that slightly discourages me. I use gtk-window-decorator for frames and titlebar and the results are strange. Title bar is drawn with squared left and rounded right corners. Moreover, no buttons are shown on it. "Menu" and "Minimize" buttons are here, but invisible (they are working and corresponding tooltips are shown when I hover mouse over their position); "Maximize" and "Close" buttons are absent. All this buttons are turned on in metacity properties.
When I turn off metacity theme support for gtk-window-decorator, all buttons are here, but decorator in this mode is quiet dumb...
So, have you any suggestions on how to get those buttons back?
Last edited by zhuk_av (2011-06-19 17:58:06)
I'm having this problem under Ubuntu, but not with my Compiz (also 0.9.4) setup with GNOME 3 on Arch. I switched to Emerald on my Ubuntu install as a temporary workaround.
Thinking about it, I think I still had the gnome-desktop2 package installed when I built compiz-core, I wonder if that has anything to do with it. Optional GNOME support is omitted in compiz-core if you upgraded to GNOME 3, because gnome-window-settings-2.0 (from the GNOME 2 gnome-control-center package I think) and gnome-desktop-2.0 are absent.
Last edited by rufflove (2011-06-13 21:21:02)
Similar Messages
-
Ever since I installed the latest Firefox update, the minimize, restore, and close buttons are visually missing, though their functions are still present.
I have also started to have one of those dialog boxes asking whether or not I would like to allow a program to make changes to my PC come up when I open Firefox.Check that Firefox isn't set to run as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
Make sure that all items are deselected in the "Compatibility" tab of the Properties window.
* Privilege Level: "Run this program as Administrator" should not be selected
* "Run this program in compatibility mode for:" should not be selected
Also check the Properties of the firefox.exe program in the Firefox program folder (C:\Program Files\Mozilla Firefox\).
If you can't make the changes then you need to start Windows Explorer as Administrator. -
My browser is missing: back, refresh buttons plus File, Edit, View, Tool buttons are missing.
I installed Firefox onto my computer and in doing so it removed my browser: back, Forward, Refresh buttons; also, the File, Edit, View, Tool, Help buttons are missing.
Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.
-
Compiz-fusion + gtk-window-decorator minimize and maximize missing
I am running GNOME using x64 at work, and here since the upgrade to 2.24, my minimize and maximize buttons are missing using the GTK-window-decorator in Compiz.
I have had this problem at home using my i686 system when I used the testing repository, but the problem was fixed in the packages that entered the extra repository.
Now I wonder why this problem still exists in the x64 packages. I did not test the former testing packages because I have to do my daily work on this pc.
Please help me. Is there a broken package that was not fixed in the x64 repo or do I need to do something myself?
Last edited by PJGrefhorst (2008-10-27 10:19:46)I solved the problem myself. The compiz-decorator-gtk needs to be rebuild against the new metacity and compiz. Please replace the package!
-
Compiz, GTK window decorator not getting along with metacity
Hello,
Today gtk-window-decorator managed to break on my machine, resulting in no window decorations. I'm using emerald as a temporary solution, but I'd prefer to go back to gtk-window-decorator if possible. When I start compiz, the following occurs:
gtk-window-decorator: error while loading shared libraries: libmetacity-private.so.1: cannot open shared object file: No such file or directory
I found some posts that suggested using metacity2 instead of metacity, but I'm using compiz-bzr from the AUR which lists metacity as a dependency which conflicts with metacity2. I tried downgrading metacity, but that didn't help. I'm not entirely sure where to go from here.
Thanks in advance!Thanks for your help!
Installing the stable version of compiz got gtk-window-decorator working again, but now I have no minimize or maximize buttons on any gtk theme (only a close button), and gtk-window-decorator throws me
(gtk-window-decorator:23942): GLib-GObject-WARNING **: invalid uninstantiatable type '(null)' in cast to 'WnckWindow'
gtk-window-decorator: Ignoring unknown or already-used button name "appmenu"
EDIT: This problem was solved by running
gsettings set org.gnome.desktop.wm.preferences button-layout "'menu:minimize,maximize,close'"
for future reference to anyone who stumbles across this post. Thanks again for the help!
Last edited by Ekkoria (2014-10-19 20:36:48) -
I recently removed an outlook account and now all of my calendar events are missing. The majority of them were added from my iphone 4s. How do I retrieve the events? Backing up with iCloud did not help, as I assumed it would.
Outlook is a mail client for PC's (and Macs). It is not a type of account. Do you mean an "Exchange Account"?
If so, then re-add it. The calendar events live on the Exchange Server. The only way to get them back is to re-add the account to the phone. The contents of Exchange and IMAP accounts are not part of the 'backup' as they already exist elsewhere. -
Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple
It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly. -
Events are missing in the calendar in Month view in Blend
Type :
Bug
Initial condition :
The blend software is running. The calendar view is opened.
Action :
Select the month view.
Expected result :
All events are displayed for each day.
Obtained result :
The events of the previous month are missing.Having the same problems where the UI elements are missing in the layout screen.
using the Show/Hide layout Preview Button I get an Program cannot display the web page.
The server is on a different box . Tried running the sapgui from a vista machine and a xp machine and they both have the same problem.
If I run Sapgui on the server box the Show/Hide layout Preview Button does show a subset on the ui elements but not all the examples described in the "ABAP Trial Version for Newbies: Part 18 - Starting with Web Dynpro for ABAP"
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1299772950DB10354599868941910736End?blog=/pub/wlg/6973
Thanks in advance. -
UI elements are missing in the layout of a view
Hi Guys,
I've downloaded New SAP NetWeaver 7.01 SP0 ABAP Trial Version. After three times installation, I gave up.
And I downloaded New SAP NetWeaver 7.01 SP3 ABAP Trial Version, it took more time than SP0 to install. Finally, it works.
Then I read this blog, /people/dirk.feeken/blog/2007/07/20/abap-trial-version-for-newbies-part-18--starting-with-web-dynpro-for-abap, to develop a Web Dynpro report. After copy the context from component controller to view, I couldn't find UI elements in the view.
What I could see in the layout of the view are:
CONTEXT_MENUS
ROOTUIELEMENTCONTAINER
Does anyone know how to find the UI elements?
Thanks in advance.
Regards,
JimHaving the same problems where the UI elements are missing in the layout screen.
using the Show/Hide layout Preview Button I get an Program cannot display the web page.
The server is on a different box . Tried running the sapgui from a vista machine and a xp machine and they both have the same problem.
If I run Sapgui on the server box the Show/Hide layout Preview Button does show a subset on the ui elements but not all the examples described in the "ABAP Trial Version for Newbies: Part 18 - Starting with Web Dynpro for ABAP"
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414900)ID1299772950DB10354599868941910736End?blog=/pub/wlg/6973
Thanks in advance. -
I have a MacBook Pro, which I just bought in August.
When I try to watch videos on my computer, a message pops up saying, "You are currently browsing the web with Google Chrome and your Video Player might be outdated." I know it's a pop up, but I don't know how to get rid of it and watch videos on my computer. I did look it up online and I downloaded the TSM Adware Removal Tool, which removed some adware files. Then I also downloaded Bitdefender Virus Scanner from the app store to scan my entire computer - nothing came up.
Please help me solve this problem. Thanks.The update alerts are fake, and are intended to dupe you into installing malware or disclosing private information so that your identity can be stolen.
You might get the alerts when visiting a website that has been hacked. Don't visit the site again. If applicable, notify the site administrator of the problem, but don't send email to an unknown party.
If you get the alerts when visiting more than one well-known website, such as Google, YouTube, or Facebook, then they're almost certainly the result of an attack on your router that has caused you to get false results from looking up the addresses of Internet servers. Requests sent to those sites are redirected to a server controlled by the attacker. It's possible, but less likely, that the DNS server used by your ISP has been attacked, but you should assume that the router is at fault until proven otherwise.
The router's documentation should tell you how to reset it to the factory default state. Usually there's a pinhole switch somewhere in the back. It may be labeled "RESET." Insert the end of a straightened paper clip or a similar tool and press the button inside for perhaps 15 seconds, or as long as the instructions specify.
After resetting the router, quit the web browser and relaunch it while holding down the shift key. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Do the equivalent if you use another browser. Open the Downloads folder and delete anything you don't recognize.
Then go through the router's initial setup procedure. I can't be specific, because it's different for every model. The key points are these:
1. Don't allow the router to be administered from the WAN (Internet) port, if it has that option. Most do.
2. Set a strong password to protect the router's settings: at least ten random upper- and lower-case letters and digits. Don't use the default password or any other that could be guessed. Save the password in your keychain. Any password that you can remember is weak.
3. If the router is wireless, or if you have a wireless access point on the network, use "WPA 2 Personal" security and set a different strong password to protect the network. If the router or access point doesn't support WPA 2, it's obsolete and must be replaced.
During the time the router was compromised, you were redirected to bogus websites. If you ever connected to a secure site and got a warning from your browser that the identity of the server could not be verified, and you dismissed that warning in order to log in, assume that your credentials for the site have been stolen and that the attacker has control of the account. This warning also applies to all websites on which you saw the fake update alerts.
Check the router manufacturer's website for a firmware update.
If you downloaded and installed what you thought was a software update, ask for instructions. -
When syncing my iTunes to my iPad from the laptop, I get a list of missing songs; they are in the library, but not in the music folder on my HD. In particular, I uploaded 3 CDs at the same time, all are in my library, and all synced to the iPad - but the music from two of them are missing from the music folder. Questions are (a) where might they have gone? and (b) is there a way of "reverse loading" them back to my hard drive from the iPad? Thanks in advance!
Hi dones49,
It sounds like your issue here is that iTunes can not find the files for some of the songs you have brought into it. This happens occasionally even if the songs have not been moved from the location that iTunes places them on import or purchase. When you try to use the song, iTunes prompts you to find the file, as you have seen.
To find the file, use the information in this article to navigate through the iTunes media folders -
Locate and organize your iTunes files
If you are still unable to locate the files, you may need to download them from the iTunes store again, or rip them from your CDs. See this article for assistance with downloading your past purchases -
Download past purchases
Thanks for using Apple Support Communities.
Best,
Brett L -
PS CS4 64-bit (in Web Premium CS4) on Win 7 PC. I did a duplicate file check on my hdd and deleted dup files. Now when I try to run PS 64-bit I get "Some of the application components are missing from the Application directory, Please reinstall the application." When I do this, it seems to install correctly until the very end, then it says "Installation Complete With Errors", and when I try to run I get the same 'component missing message'. What can I do? PS 32 bit runs fine. Some of the other applications ib Web Premium say the shortcut has been changed or removed. I appreciate your help...Thank you
Best advice I can think of is to uninstall and run the Clean Script from here.
Adobe - Adobe CS4 Clean Script -
"File" and "View" are missing from the ribbon in Excel, MS Office 2011, please help!
"File" and "View" are missing from the ribbon in Excel, I'm running MS Office 2010. Please help!
Post your question on the MS Mac forums as it's their software you're having issues with: http://answers.microsoft.com/en-us/mac?auth=1
-
I tried opening PS and this message popped up 'Some of the application components are missing from the Application directory. Please reinstall the application.' I cannot find the Reinstall button?
I followed these instructions but cannot find how to reinstall PS. When I click on the membership link the page displays as NOT BEING FOUND.
Quit all applications.
In the Finder, navigate to the Photoshop application folder.
Do one of the following:
If the Locales folder is not listed within the application folder, then skip to Step 5.
If the Locales folder is listed within the application folder, then drag the Locales folder to the Trash.
Choose Finder > Empty Trash.
Start the installer for Photoshop or your edition of the Adobe Creative Suite.
If you purchased boxed software, then insert the installation DVD-ROM into your computer's DVD drive.
If you purchased downloadable software from the Adobe Online Store, then double-click the disk image (.dmg) file or files that you downloaded. (If you no longer have the downloaded disk image file or files, then log in to your account at www.adobe.com/membership to download the installer.) -
For all entries : lines are missing in the results
Hi all,
I have a problem with my abap code.
some lines are missing in the results.
I have check the note 65554 but i use the version 6.40
TYPES: BEGIN OF wys_bseg,
bukrs TYPE bsad-bukrs,
belnr TYPE bsad-belnr,
gjahr TYPE bsad-gjahr,
augbl TYPE bseg-augbl,
augdt type bseg-augdt,
hkont TYPE bseg-hkont,
WRBTR type bseg-WRBTR,
KOART type bseg-KOART,
SHKZG type bseg-SHKZG,
END OF wys_bseg.
TYPES: begin of wys_bsas,
bukrs TYPE bsas-bukrs,
hkont TYPE bsas-hkont,
augbl TYPE bsas-augbl,
augdt type bseg-augdt,
gjahr TYPE bsas-gjahr,
belnr TYPE bsas-belnr,
waers TYPE bsas-waers,
blart TYPE bsas-blart,
gsber TYPE bsas-gsber,
dmbtr TYPE bsas-dmbtr,
xblnr TYPE bsas-xblnr,
SHKZG type bseg-SHKZG,
zmntfact TYPE bsas-WRBTR,
end of wys_bsas.
DATA: wt_bseg_tmp TYPE wys_bseg OCCURS 0 WITH HEADER LINE.
DATA : wt_bsas type wys_bsas occurs 0 WITH HEADER LINE.
sort wt_bsas by bukrs belnr gjahr.
DELETE ADJACENT DUPLICATES FROM wt_bsas COMPARING bukrs belnr gjahr.
IF NOT wt_bsas[] IS INITIAL.
select bukrs belnr gjahr augbl augdt hkont WRBTR KOART SHKZG from
bseg into table wt_bseg_tmp
for all entries in wt_bsas
where bukrs EQ wt_bsas-bukrs
and belnr EQ wt_bsas-belnr
and gjahr EQ wt_bsas-gjahr
and koart EQ 'D'.
ENDIF.Hi
Yes Arun is right, INTO TABLE option delete automatically the duplicates lines, so you make sure to insert all keys in order to load all record.
Insert the field BUZEI in the structure of internal table:
TYPES: BEGIN OF wys_bseg,
bukrs TYPE bsad-bukrs,
belnr TYPE bsad-belnr,
gjahr TYPE bsad-gjahr,
buzei type bseg-buzei, <------ New field
augbl TYPE bseg-augbl,
augdt type bseg-augdt,
hkont TYPE bseg-hkont,
WRBTR type bseg-WRBTR,
KOART type bseg-KOART,
SHKZG type bseg-SHKZG,
END OF wys_bseg.
Max
Maybe you are looking for
-
Problems with iTunes installation
Hello, I am having problems with installing iTunes 10.4. I am running an Acer Aspire M1640 running Windows Vista (32) v 6.0.6002 SP2 and updated. When trying to update my old version of iTunes I got the following error "Bonjour: The feature that you
-
How to upload claim and balance as on date at the time of go live
Experts, Where i have to update the claimed value and the balance eligibility at the time go live I have seen one report while searching thorough the Forum i found this PC00_M40_UPCF, i tried to upload claimed value as well the carry forward amount
-
What is the keyboard shortcut for the search window?
Is there a keyboard shortcut that takes me directly to the Google search window in the upper right hand corner of the Safari toolbar? I looking for the equivalent of Firefox's Cmd-K shortcut. I've looked at lists of Safari shortcuts online, but I can
-
Dear all, 11.2.0.3 on Linux 6 SQL*Plus: Release 11.2.0.3.0 Production on Thu Apr 9 10:33:07 2015 Copyright (c) 1982, 2011, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production With t
-
Theme Rendering picks up desktop image & open windows?
When I 'apply' a theme in iMovie (like the Open - Road Trip theme,)something very odd happens - the rendered result flickers between the expected theme video output and a garbled version of my desktop background and any other windows I may have open.