[Solved]can't get systemd to work, syslog.service not loaded
So, i've been trying to use systemd today, after "Create systemd configuration files." step and reboot, i always got this:
Any Help would be appreciated..
Last edited by veroke12 (2012-08-25 07:31:06)
eldragon wrote:remove quiet from your kernel boot parameters. post some more useful stuff like the dmesg (obtained from the recovery console)
that did the trick, but can't login (i use startx)..
and get an error mounting:
mnt-windows.mount - /mnt/windows
Loaded: loaded (/etc/fstab)
Active: failed (Result: exit-code) since Sat, 25 Aug 2012 13:03:57 +0700; 3min 26s ago
Where: /mnt/windows
What: /dev/sdb
Process: 367 ExecMount=/bin/mount /dev/sdb /mnt/windows -t ntfs-3g -o gid=users,fmask=113,dmask=002 (code=exited, status=12)
CGroup: name=systemd:/system/mnt-windows.mount
Aug 25 13:03:57 myhost mount[367]: NTFS signature is missing.
Aug 25 13:03:57 myhost mount[367]: Failed to mount '/dev/sdb': Invalid argument
Aug 25 13:03:57 myhost mount[367]: The device '/dev/sdb' doesn't seem to ha...S.
Aug 25 13:03:57 myhost mount[367]: Maybe the wrong device is used? Or the w... a
Aug 25 13:03:57 myhost mount[367]: partition (e.g. /dev/sda, not /dev/sda1)...d?
dmesg:
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e1d5602b-de83-46e0-8ed8-4366a319b49b ro init=/bin/systemd
[ 0.709226] systemd-udevd[41]: starting version 188
[ 2.936891] systemd[1]: systemd 188 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP; arch)
[ 3.170230] systemd[1]: Inserted module 'autofs4'
[ 3.199718] systemd[1]: Set hostname to <myhost>.
[ 4.267502] systemd[1]: [/usr/lib/systemd/system/rc-local.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
[ 4.445331] systemd[1]: [/usr/lib/systemd/system/rc-local-shutdown.service:3] Unknown lvalue 'ConditionPathIsExecutable' in section 'Unit'. Ignoring.
[ 4.503987] systemd[1]: Cannot add dependency job for unit dkms.service, ignoring: Unit dkms.service failed to load: No such file or directory. See system logs and 'systemctl status dkms.service' for details.
[ 4.504023] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 4.504291] systemd[1]: Socket service syslog.service not loaded, refusing.
[ 5.060568] systemd-udevd[125]: starting version 188
[ 5.760783] systemd-journald[132]: Fixed max_use=145.0M max_size=18.1M min_size=64.0K keep_free=72.5M
[ 5.760833] systemd-journald[132]: Reserving 33009 entries in hash table.
[ 5.761588] systemd-journald[132]: Vacuuming...
[ 61.730597] systemd[1]: Job systemd-tmpfiles-clean.timer/start failed with result 'dependency'.
[ 61.730612] systemd[1]: Job dbus.socket/start failed with result 'dependency'.
[ 61.730719] systemd[1]: Unit mnt-windows.mount entered failed state.
[ 61.734921] systemd-journald[132]: Received SIGTERM
[ 61.810451] systemd[1]: Startup finished in 3s 223ms 841us (kernel) + 58s 586ms 503us (userspace) = 1min 1s 810ms 344us.
[ 61.839330] systemd-journald[379]: Fixed max_use=145.0M max_size=18.1M min_size=64.0K keep_free=72.5M
[ 61.839678] systemd-journald[379]: Vacuuming...
[ 61.893807] systemd-journald[379]: Received SIGUSR1
Last edited by veroke12 (2012-08-25 06:31:18)
Similar Messages
-
Systemd: Socket service syslog.service not loaded, refusing [SOLVED]
I have installed systemd as mentioned in the wiki alongwith initscripts and I use "init=/bin/systemd" in kernel line to start it.
I am getting this systemd error "Socket service syslog.service not loaded, refusing" at boottime. This is the only error that comes. I have tried to check the wiki and google and found following links:
https://bbs.archlinux.org/viewtopic.php?id=147640
http://www.spinics.net/lists/hotplug/msg05295.html
There is apparently a solution to this:
http://www.spinics.net/lists/hotplug/msg05296.html
But it is too technical for me to understand and implement; and it is not for Arch linux. Please help.
Last edited by rnarch (2012-10-25 16:46:46)I have syslog-ng in the DAEMONS line of rc.conf file. I mentioned that I see this error at time of booting only. The systemctl status outputs are as follows:
$ systemctl status syslog.service
syslog.service
Loaded: error (Reason: No such file or directory)
Active: inactive (dead)
$ systemctl status syslog-ng.service
syslog-ng.service - System Logger Daemon
Loaded: loaded (/usr/lib/systemd/system/syslog-ng.service; disabled)
Active: active (running) since Wed, 24 Oct 2012 19:09:18 +0000; 1h 54min ago
Docs: man:syslog-ng(8)
Main PID: 294 (syslog-ng)
CGroup: name=systemd:/system/syslog-ng.service
└ 294 /usr/sbin/syslog-ng -F
What further information should I provide. -
[SOLVED] Can't get sound to work.
Hello, I installed archlinux a few days ago, I love it!
But I can't get sound to work.
I followed the alsa archwiki, but I still couldn't get it work.
I'm a real noob.
Someone please help.
Last edited by egb (2011-02-16 22:45:12)JokerBoy wrote:
Inxsible wrote:
Try this: as your user NOT root
alsamixer
why not? i use alsamixer as root to set all "globally". and "alsactl store" after that.
egb - make also sure you added yourself to audio group.
yeah, I did that some time ago
edit: oh and I get this when I do the "alsactl store":
alsactl: save_state:1504: No soundcards found...
Last edited by egb (2011-02-16 10:30:34) -
I have several episodes of a TV show where it says download error, tap to retry and when I do it repeats the error message. Can I get it to work or get reimbursed for the ones I'm missing? I'm using an iPad 1 which has worked fine for all the others.
Hi AlpineJean,
I'm sorry to hear you are having issues downloading some episodes to your iPad.
I would first suggest you sign out of your iTunes account on your iPad, restart the device and sign back in.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
Click on the link below for additional troubleshooting steps with more details and screenshots.
I've quoted some helpful highlights for you:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To view or download previously purchased:
TV Shows on iOS
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID you used for the original purchase.
Tap More from the bottom navigation bar.
Tap TV Shows.
Locate the TV show episode or series you would like to download.
Once you've located the TV shows you are looking for, tap the download button.
The TV show will begin downloading.
Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.
If this does not resolve your issue, please follow these instructions for support from the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Have a great day!
- Judy -
[Solved] Can't get MPD to work with PulseAudio
After a long time using straight Alsa I've been setting up Pulse because I want to send my laptop's audio to a networked device. So far I have audio output working (through my laptop) with everything except MPD. MPD won't output audio with Pulse enabled; songs stay in "paused" mode. I run MPD as my local user and have been trying to get this suggested systemd service to work, but it fails when I start it:
systemd[1]: Starting Music Player Daemon (running as 0112358)...
systemd[1]: Started Music Player Daemon (running as 0112358).
systemd[4098]: pam_unix(system-local-login:session): session opened for user 0112358 by (uid=0)
sudo[4095]: pam_unix(sudo:session): session closed for user root
mpd[4098]: Failed to bind to '[::]:6600': Failed to create socket: Address family not supported by protocol
systemd[4100]: pam_unix(system-local-login:session): session closed for user 0112358
systemd[1]: mpd-myuser.service: main process exited, code=exited, status=1/FAILURE
systemd[1]: Unit mpd-myuser.service entered failed state.
dbus-daemon[943]: dbus[943]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1000 pid=4100 comm="(sd-p ") interface="org.freedesktop.login1.Manager" member="ReleaseS
dbus[943]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1000 pid=4100 comm="(sd-p ") interface="org.freedesktop.login1.Manager" member="ReleaseSession" error name
systemd[4100]: pam_systemd(system-local-login:session): Failed to release session: Access denied
sudo[4114]: 0112358 : TTY=pts/3 ; PWD=/home/0112358 ; USER=root ; COMMAND=/usr/bin/journalctl
sudo[4114]: pam_unix(sudo:session): session opened for user root by (uid=0)
This is my /etc/mpd.conf:
music_directory "/home/0112358/Music"
playlist_directory "/home/0112358/Music/Playlists"
db_file "/home/0112358/.mpd/mpd.db"
log_file "/home/0112358/.mpd/mpd.log"
pid_file "/home/0112358/.mpd/mpd.pid"
state_file "/home/0112358/.mpd/mpd.state"
user "0112358"
gapless_mp3_playback "yes"
input{
plugin "curl"
audio_output{
type "pulse"
name "My Pulse Output"
/etc/asound.conf:
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
ctl.!default {
type pulse
fallback "sysdefault"
/etc/pulse/default.pa:
.nofail
.fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-switch-on-port-available
### Automatically load driver modules depending on the hardware available
.ifexists module-udev-detect.so
load-module module-udev-detect
.else
### Use the static hardware detection module (for systems that lack udev support)
load-module module-detect
.endif
### Automatically connect sink and source if JACK server is present
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect channels=2
.fail
.endif
### Automatically load driver modules for Bluetooth hardware
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
### Load several protocols
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
### Automatically restore the default sink/source when changed by the user
### during runtime
### NOTE: This should be loaded as early as possible so that subsequent modules
### that look up the default sink/source get the right value
load-module module-default-device-restore
### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams
### Make sure we always have a sink around, even if it is a null sink.
load-module module-always-sink
### Honour intended role device property
load-module module-intended-roles
### Automatically suspend sinks/sources that become idle for too long
load-module module-suspend-on-idle
### If autoexit on idle is enabled we want to make sure we only quit
### when no local session needs us anymore.
.ifexists module-console-kit.so
.nofail
load-module module-console-kit
.fail
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
### Enable positioned event sounds
load-module module-position-event-sounds
### Cork music/video streams when a phone stream is active
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
### Load DBus protocol
.ifexists module-dbus-protocol.so
load-module module-dbus-protocol
.endif
### Make some devices default
#set-default-sink output
#set-default-source input
Could anyone give me a hand please?
Last edited by 0112358 (2013-06-30 15:30:33)0112358 wrote:
ngoonee wrote:Or you could workaround it by outputting to tcp/ip to pulse (I wrote that section of the pulseaudio article on wiki.archlinux.org)
You're suggesting running mpd as its own user? If I did that, and configured mpd to output to 127.0.0.1, etc, would Pulse then be able to redirect the audio to another networked machine (since that's my end goal here)? I don't want to end up having to put the other machine's IP directly in mpd.conf, since I won't always be running that way (since it's a laptop - sometimes I'll take it on the road and use headphones).
Pulse can do that, yes, its very flexible that way. Doesn't matter where the audio comes from, really. Though as a disclaimer, I haven't tried it myself yet.
Why not just set two outputs for mpd and toggle between them since it has native support? Doesn't sound like you really need pulseaudio. -
[SOLVED] Can't get Steam to work, VirtualBox installation
Hello!
I'm having problems with getting Steam to work on my Arch Linux installation. I'm new to Linux so I'll just give you a prehistory & console output. I installed the distro on a virtual machine created in VirtualBox, installed xorg & KDE, I didn't install any video drivers because this is what wiki says:
https://wiki.archlinux.org/index.php/VirtualBox#Installation_steps_for_Arch_Linux_guests wrote:Note: You do not need to also install a specific video driver in the guest system. Install the Guest Additions instead.
So I installed "virtualbox-guest-utils" package, created a file /etc/modules-load.d/virtualbox.conf with the following contents:
vboxguest
vboxsf
vboxvideo
Then I executed
sudo systemctl enable vboxservice
and rebooted the system. After the reboot I got the shared clipboard feature working => VBox Guest Additions seemed to work. Then I installed "steam" package, launched it via the terminal and waited for it to download it's updated. After Steam downloaded everything, I tried to launch it once again via terminal and got this:
Running Steam on arch 64-bit
STEAM_RUNTIME is enabled automatically
Installing breakpad exception handler for appid(steam)/version(1405013548_client)
Xlib: extension "GLX" missing on display ":0".
Installing breakpad exception handler for appid(steam)/version(1405013548_client)
Installing breakpad exception handler for appid(steam)/version(1405013548_client)
Installing breakpad exception handler for appid(steam)/version(1405013548_client)
Xlib: extension "GLX" missing on display ":0".
OpenGL GLX extension not supported by displayAssert( Assertion Failed: Fatal Error: OpenGL GLX extension not supported by display ):/home/buildbot/buildslave_steam/steam_rel_client_ubuntu12_linux/build/src/steamUI/Main.cpp:285
Installing breakpad exception handler for appid(steam)/version(1405013548_client)
Uploading dump (out-of-process) [proxy '']
/tmp/dumps/assert_20140712040049_6.dmp
Finished uploading minidump (out-of-process): success = yes
response: CrashID=bp-e2313069-9637-4ef3-aeee-fe3b92140711
and a GUI window saying "OpenGL GLX extension not supported by display". I tried to find a solution on the internet but they all mentioned installing Nvidia drivers. And VirtualBox GPU != Nvidia GPU.
Is there any way to solve this? Steam is working on my Fedora-VBox (this is the distro our lecturer uses as an example to teach us about Linux) installation out of the box.
EDIT: forgot to mention that system is x86_64, multilib in enabled, 3D acceleration in VM settings is enabled.
Last edited by Nathel (2014-07-12 22:10:16)Fixed the issue by replacing nvidia-libgl with mesa-libgl & lib32-mesa-libgl.
-
[SOLVED] Can't get curl to work, among everything else
No matter what form I put curl in, I can't see to get it to work. The various manuals I've read through <man> and online have all shown me different examples, but none work.
I've tried <command> | curl -F 'sprunge=<-'http://sprunge.us' and it does... nothing.
I've tried substituting ix urls and pastebin urls but it does nothing.
I feel like a complete moron because everyone expects me to instantly understand what all this gibberish means, and no one else seems to have a problem uploading command text online.
I've had trouble every step of the way installing arch, and its taken me four hours to slug through each problem. Right now I can't start fluxbox for some reason, but I can't get the errors here except for what I write down.
Heres the error for that
Xmodmap: unable to open display ''
Error: Couldn't connect to XServer
I've tried redirecting xmodmap to the keys but it did nothing. I've tried figuring out this xserver thing but my retardation has apparently gotten in the way.
Is this normal? Does everyone feel like an 90 year old when they first jump into arch linux?
Last edited by Swashy (2012-12-05 19:08:13)gsgleason wrote:
this site: http://www.linux-ninjas.com/2012/06/spr … tebin.html
Shows this method:
<command> | curl -F 'sprunge=<-' http://sprunge.us
The Arch Wiki says the same :-)
You an also try some other pastebin clients: https://wiki.archlinux.org/index.php/Li … in_Clients -
[Solved] Can't get sound to work proper
Hey
I use KDE4 with KMix. I have 5.1 Optical sound.
When I enter Audio Setup in KMix and test the "hw: 0,1" option I get playback.
But I haven't gottten any sound except that. Tried a video in MPlayer and Youtube video in Firefox.
I'm still abit new to Arch and linux.
Also tried adding
ctl.equal {
type equal;
pcm.plugequal {
type equal;
# Modify the line below if you do not
# want to use sound card 0.
#slave.pcm "plughw:0,0";
#by default we want to play from more sources at time:
slave.pcm "plug:dmix";
#pcm.equal {
# Or if you want the equalizer to be your
# default soundcard comment the following
# line and uncomment the above line.
pcm.!default {
type plug;
slave.pcm plugequal;
pcm.eq {
type ladspa
# The output from the EQ can either go direct to a hardware device
# (if you have a hardware mixer, e.g. SBLive/Audigy) or it can go
# to the software mixer shown here.
#slave.pcm "plughw:0,0"
slave.pcm "plug:dmix"
# Sometimes you may need to specify the path to the plugins,
# especially if you have just installed them. Once you have logged
# out/restarted this should not be necessary, but if you get errors
# about being unable to find plugins, try uncommenting this.
#path "/usr/lib/ladspa"
plugins [
label mbeq
id 1197
input {
#this setting is here by example, edit to your own taste
#bands: 50hz, 100hz, 156hz, 220hz, 311hz, 440hz, 622hz, 880hz, 1250hz, 1750hz, 25000hz,
#50000hz, 10000hz, 20000hz
controls [ -5 -5 -5 -5 -5 -10 -20 -15 -10 -10 -10 -10 -10 -3 -2 ]
# Redirect the default device to go via the EQ - you may want to do
# this last, once you're sure everything is working. Otherwise all
# your audio programs will break/crash if something has gone wrong.
pcm.!default {
type plug
slave.pcm "eq"
# Redirect the OSS emulation through the EQ too (when programs are running through "aoss")
pcm.dsp0 {
type plug
slave.pcm "eq"
To
/etc/asound.conf
Which I got from https://wiki.archlinux.org/index.php/Ad … leshooting
Last edited by Syth (2011-11-03 20:20:43)Syth wrote:Well as I said. Sounds like KDE startup sound and such works. Just can't get any sound out of mPlayer and youtube.
Did what you said. PCM was the only one muted.
Oddly, I recently started having the opposite problem. KDE startup and other systems sounds have stopped playing. All my other sound (mplayer, flash, etc) work fine. I can play the startup sound fine when opening it via dolphin. It just doesn't play on startup, or any other system sound. I know this happened after a recent update but I am not sure what or when caused it. Startup sound isn't that important to me but fixing it is. No luck so far. -
[SOLVED] Can't get spamassassin to work
Hi!
I'm trying to get spamassassin to work, but it seems like it doesn't want to cooperate
Here's ~/.forward file
"|IFS=' ' && exec /usr/bin/procmail -f- || exit 75 #shin"
A bit of postfix'es main.cf
mailbox_command = /usr/bin/procmail -a "$EXTENSION"
And a .procmailrc
# SpamAssassin sample procmailrc
# ==============================
# The following line is only used if you use a system-wide /etc/procmailrc.
# See procmailrc(5) for infos on what it exactly does, the short version:
# * It ensures that the correct user is passed to spamd if spamc is used
# * The folders the mail is filed to later on is owned by the user, not
# root.
DROPPRIVS=yes
VERBOSE=yes
:0fw: spamassassin.lock
* < 256000
| spamassassin
:0:
* ^X-Spam-Level: \*\*\*\*\*\*\*\*\*\*\*\*\*\*\*
almost-certainly-spam
:0:
* ^X-Spam-Status: Yes
probably-spam
:0
* ^^rom[ ]
LOG="*** Dropped F off From_ header! Fixing up. "
:0 fhw
| sed -e '1s/^/F/'
The X-Spam-... doesn't appear in headers, and there's nothing in the logfiles. What's wrong?
Last edited by lateralus (2008-10-17 19:36:56)Aight, solved it. I had to replace this line of .procmailrc
| spamassassin
With this one
| /usr/bin/perlbin/vendor/spamassassin -
[SOLVED] Can't get any sound working at all
I've just installed Arch again on my MacBook 5,2 and I can't get any sound (speakers or earphones) to work. I've tried the ALSA wiki page for troubleshooting, but none of that has worked. Does anyone have any ideas where to start with this?
Last edited by dave1022 (2011-05-07 15:04:31)When you try something and it doesn't work, post the commands and the errors you get here, so that someone can actually help you with your problem.
Please help us help you. -
[SOLVED] can't get flash to work
First i tried copying the flashplayer.so to /usr/lib/mozilla/plugins dir, but it didnt exists yet, so i did a searh and i found. This http://wiki.archlinux.org/index.php/Ins … bit_System tried installing nspluginwrapper but it didnt work after restarting firefox. Tried manually installing the flashplater.so files again, since there was a dir there. Tried pacman -S flashplugin after i found that to be the most up to date way. None of this has worked, any ideas? I installed the 10.0.42.34 version. I never restarted anything other than firefox either. Thanx for any help.
Last edited by leetstalker (2009-12-23 08:20:13)Yes, sorry about the editing, i just spent 10 minutes looking for the edit buttons and then the submit buttons, my new style made them invisible:P . I had a thought though. Before i installed gnome i had installed firefox, could i have installed a second copy while installing gnome or done something else to cause me difficulty? I like firefox but i guess i'll try getting flash to work in some other browsers and see how that goes. Also, firefox isnt detecting any plugins in its add-ons section, perhaps thats a clue?
-
Can't get Airplay to work. Do not see icon
Hello,
I have updated FW on Airplay compatible receiver (Denon 2312), updated iPad 3 to ios6, opened the ports: TCP 443, TCP 5297 and UDP 5351 in NAT.
MAC address authentication is disabled, I have WPA2 (mixed) password on wi-fi.
Anyone has any tips on why it does not work? Did not work on ios5 either, just updated to 6 to see if it worked, but no..If your router is a dual 2.4 and 5Ghz router then one device could be connected on 2.4 while the other is on 5.
You might want to get with your router manufacturer on how you see this, whether it is Bonjour compatible, and which setup on the router you need to use for the iDevice to see your receiver. -
[SOLVED] Can't get network to work (realtek NIC)
Hi there!
I found Arch a couple of weeks ago and I got pretty excited with the possibility of taking my old Athlon 750MHz out of inactivity.
Unfortunately, I can't seem to get the network to work.
* I installed the system using Archlinux-i686-2007.08-2.core.iso
* I have a little router and the machine has static IP
lspci:
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
rc.conf:
MOD_AUTOLOAD="yes"
MOD_BLACKLIST=()
MODULES=(8139cp 8139too mii slhc)
USELVM="no"
HOSTNAME="hige"
lo="lo 127.0.0.1"
eth0="eth0 192.168.2.103 netmask 255.255.255.0 broadcast 192.168.2.255"
INTERFACES=(lo eth0)
gateway="default gw 192.168.2.61"
ROUTES=(gateway)
DAEMONS=(syslog-ng network netfs crond)
I think I got the configuration right, however, I have no eth0 (i.e., ifconfig -a only gives 'lo')
Not sure if it's relevant, but here's something I found interesting in dmesg:
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:00:0a.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
PCI: Unable to reserve I/O region #1:100@de00 for device 0000:00:0a.0
Trying to free nonexistent resource <000000000000de00-000000000000deff>
Trying to free nonexistent resource <00000000efffff00-00000000efffffff>
8139too: probe of 0000:00:0a.0 failed with error -16
And here's a dmesg of an old gentoo instalation that I had in the same computer, but with an old, damaged HDD:
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
8139cp 0000:00:0a.0: Try the "8139too" driver instead.
8139too Fast Ethernet driver 0.9.28
AMD756: dev 10ec:8139, router pirq : 3 get irq : 10
PCI: setting IRQ 10 as level-triggered
PCI: Found IRQ 10 for device 0000:00:0a.0
eth0: RealTek RTL8139 at 0xc8800f00, 00:e0:4d:84:1b:55, IRQ 10
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Am I doing something wrong?
Any advice would be greatly appreciated!
edit: changed the subject to [solved]
Last edited by jorgenmz (2008-04-16 22:39:48)The kernel module for
Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+
is 8139too I think
So /etc/rc.conf should be like this
# HARDWARE
# Scan hardware and load required modules at bootup
MOD_AUTOLOAD="yes"
# Module Blacklist - modules in this list will never be loaded by udev
MOD_BLACKLIST=()
# Modules to load at boot-up (in this order)
# - prefix a module with a ! to blacklist it
MODULES=( 8139too forcedeth sk98lin slhc ac97_bus snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-seq snd-hwdep snd-$
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
The first one is 8139too, so it will be eth0
In my example the second one is forcedeth for nvidia ethernet controler, so its going to be eth1
Don't forget to edit /etc/resolv.conf -
[SOLVED] Can't get DE to work with catalyst
Hey everyone,
I got problems getting KDE/Fluxbox running. I've installed the latest catalyst drivers (11.6) from AUR. "aticonfig --initial" created the xorg.conf for me, which seems to be ok but it gives me this error:
Found fglrx primary device section
Fail to link to fglrx-libglx.so, please check wether driver is installed correctly
I got two Radeon HD5850s. Is it necessary to connect those two cards with the crossfire cables? I did, but I think it doesn't make any difference if I don't, it's probably unrelated to my problem. When I try to "startx" this is what I got:
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:0) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
Segmentation fault at address 0x838
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
I've also uploaded my /var/log/Xorg.0.log, maybe this is helpful.
My xorg.conf looks like this:
#Section "InputDevice"
# Identifier "Generic Keyboard"
# Option "CoreKeyboard"
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# Option "XkbOptions" "ctrl:nocaps"
#EndSection
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0"
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-1"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-1"
Driver "fglrx"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-1"
Device "aticonfig-Device[0]-1"
Monitor "aticonfig-Monitor[0]-1"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
I'm using kernel 2.6.39 (x86_64) and I've only one display connected to the first card, I don't have another one, so no xinerama or something like that.
Can anyone help?
best regards
Webmaniac
Last edited by Webmaniac2 (2011-06-24 19:41:57)1- remove your catalyst an catalyst-utils driver build from AUR.
2- remove fglrx from your modules, in my experience you don`t need it there unless you`re using catalyst-daemon.
3- I recommend you use the Catalyst repository:
[catalyst]
Server = http://catalyst.apocalypsus.net/repo/catalyst/$arch
4- Be sure to remove /etc/ati/
5- update repositories and install catalyst and catalyst-utils from there
6- finally follow this part of the wiki:
After installing package you probably need to configure xorg. Using provided aticonfig tool is recommended:
# aticonfig --initial
(or for Dual Head: # aticonfig --initial=dual-head)
And add nomodeset to your kernel line in /boot/grub/menu.lst , ie.:
kernel /boot/vmlinuz26 root=/dev/sda1 ro nomodeset
You may now reboot your system.
I hope that works, also if you want you can ask in the The AMD/ATI Bar & Grill thread. -
[SOLVED] Can't get Echinus to work
Hello Arch users,
I have installed Echinus from the AUR, but it doesn't seem to be working, or else I'm not doing something correctly. I am using the example config from the Echinus Arch wiki. I am using Slim as the display manager, and have configured Slim correctly as far as I know. According to the Echinus Arch wiki, I am supposed to copy everything from /usr/share/examples/echinus to either /etc/xdg/echinus or to my home folder. However, there is no /examples directory under /usr/share on my system. Is this perhaps a depricated option, or am I missing something?
Here is an excerpt from my slim.conf pertaining to echinus:
echinus)
exec dbus-launch --exit-with-session echinus
Any help is appreciated.
Last edited by hyperreal_logic (2012-06-04 19:03:02)Don't reinstall yet. If echinus is in /usr/bin, it built and installed correctly.
When you say you see a black screen with a cursor when you start echinus with .xinitrc, do you mean a movable mouse pointer?
If so, go back to using .xinitrc and startx; a blank screen with a movable mouse pointer is exactly what you should see when echinus starts. We can deal with your login manager issues later.
If not, please tell me exactly what you see, and skip to step(5) below.
Some simple rule out questions. First, run startx to start echinus.
1. When you see the movable pointer and blank screen, what happens if you press ctrl-alt+q?
2. Do you have xterm installed?
3. If you have xterm, what happens if you press alt+t when you see the blank screen with movable pointer?
4. If you don't have xterm, install it and try step 3 again.
5. If none of these steps produce any useful result, switch to another tty and post output of
ps ax | grep echinus
If you get hung up again, you can kill echinus from another tty with
pkill echinus
(you won't need to reboot).
I built echinus from the AUR yesterday and can run it successfully from .xinitrc/startx, so we should be able to fix this. I'm pretty sure I know why it doesn't show up in LXDM (it doesn't create a .desktop file in /usr/share/xsessions), but we'll get to that later.
Last edited by 2ManyDogs (2012-06-04 16:07:40)
Maybe you are looking for
-
Exchange - reply and forward arrow symbols not showing in Outlook
I have a hosted Exchange 2007 account and I am running iOS 6.1.3 on an iPhone 4S. When I reply to an e-mail, a grey reply arrow shows up on my iPhone. However, in Outlook, there is no reply arrow. There should be a little purple reply arrow. And
-
I need some help designing my new screen in jsp sample data: The user logs in and he has to select the following details and click submit. For each child, three menu items should be selected for BF, Lunch and Dinner Also, for each option, whether it
-
I bought my macbook pro this morning. When I turned it on it led me through set up with voice over. I finally quit VO but my pointer is not working. It moves but does not open anything. Can anyone help?
-
I'm trying to watch a tv show on my iPad but it keeps freezing 15 minutes into the program. How can I fix this?
-
Unable to submit form on web page using Invoke-WebRequest
Looking to automate the Web search on HP's website by serial number to get the warranty data. I am able to successfully get back the web page, and I can populate the fields in the form. However, when I submit the POST, I don't seem to get back any d