[SOLVED] - Can't get the right Intel video driver to work!

Hi,
Just reinstalled my wifes Laptop. When she got to work this morning she had Windows XP, when she gets home shes gonna have Archlinux!
Anyway...
She has an old Toshiba laptop and I can't get the correct video driver so I can't fire up X.
lspci says VGA compatible controller: Intel Corportaion 82852/855GM Integrated Graphics Device (rev 02)
I have tried:
# xf86-video-i740 Intel i740 video driver
# xf86-video-i810 Intel i810/i830/i9xx video drivers (deprecated - use -intel)
# xf86-video-intel Newer Version of Intel i810/i830/i9xx video drivers
# xf86-video-intel-legacy Legacy-driver for older intel cards as 82865G (xf86-video-intel currently crashes with older cards) <--- not available any more?
# xf86-video-vesa vesa video driver
# xf86-video-vga VGA 16 color video driver
Xorg says:
(EE) Failed to load module "intel"
(EE) Failed to load module "i810"
(EE) Failed to load module "vesa"
(EE) Failed to load module "fbdev"
I have tried to removed the drives between my tryouts by using:
# pacman -Rnsc xf86-video-<driver>
Running the newest Xorg without xorg.conf but have tried a few with xorg.conf (Xorg -configure) and even hwd -x and used both the vesa and intel output...
Any suggestions?
Last edited by ftornell (2009-05-28 21:14:48)

Driver was there now, I did a pacman -Syu first time after intsallation...
Case closed!

Similar Messages

How can I get the right click to work in firefox -- it works in internet explorer

how can I get the right click to work in firefox -- it works in interne

Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

I downloaded bundle for ms office only to realise its just a template.my questions are can i be refunded and how can i get the right msoffice because am in need of it badly

i downloaded bundle for ms office only to realise its just a template.my questions are can i be refunded and how can i get the right msoffice because am in need of it badly

You can request a Mac App Store refund at reportaproblem.apple.com
You can buy Microsoft Office at office.microsoft.com

HT4759 how can i get the right version to install icloud on my mac

how can i get the right version to install icloud on my mac

Open the Mac App Store and buy Mountain Lion.
(90636)

Airport I just can use one device to connect with the internet, PPoE setup problem. Can't get the right ip

My airport exrreme can't get the right ip if I try to make a new network
I use also the apps
I have 3 devices but just can used always one
My ip and my user name is from the university
I need to fix the ip, username and password in the airport extrem, but he always copy a wrong ip in the system
Thanks for help
Elias

You're only allowed to authorize 5 devices with your apple id.
How many have you got authorized?
Maybe deauthorize one of them.

I can't get the h264 compressed video frame buffer

hello everybody, i tried to develop video streaming App on iPhone 4. But i can't get the h264 compressed video frame buffer before streaming these frames to network. Could anybody please tell me how to do this, thanks!!!

Look to see if you still have A.Pack installed on your computer; it should be in the Applications folder on your boot drive. That's what was used for AC3 encoding prior to Compressor 3. In the meantime, you could lower the bit rate of the video in order to use the AIF audio file on your DVD.
-DH

I recently bought a new macbook pro and set it up using the migration assistant and my mac mini. I can't get the text message forwarding feature to work with both computers.

I recently bought a new macbook pro and set it up using the migration assistant from my mac mini. I can't get the text message forwarding feature to work with both computers. It keeps saying that I only have 2 devices setup, my iPad and my macbook pro. When I mess with the setting on my mac mini, it goes from saying that that is one of the devices to my macbook pro being the 2nd device. I think that something happened as a result of my using the migration assistant and now it thinks that my macbook pro and my mac mini are one and the same computer. Any ideas?

Thanks, Sig.
The old computer is a 2.6 Ghz Intel Core 2 Duo
The new one is a 2.3 GHz intel core i7
In going over this, thanks to "tallking it out" with you, I did discover the Text Edit problem. Because I've still been unable to get the new computer text size (fonts or whatever) to match the old computer, I did not notice that the curser is now different--the line midway down the curser has to be placed on the line I am working upon, otherwise the edits go elsewhere on the page. Now, with a bit of difficulty, I am able to get Text Edit to work correctly.
If you have any ideas as to why my menu bar and Text Edit type are still so slow, I'd love to have them.
(I went through the process you suggested earlier, re my Trackpad preferences, and found no improvement.)

I can not get the flash player plug in to work with Internet Explorer

I can not get the flash player plug in to work with Internet Explorer

Zoltan71 wrote:
I just bought this computer. My Internet Explorer is version 11.0.1
I have the box checked to Install new version automatically, but it has not done any upgrading.
I can't get the computer to update anything as far as I can see.
The flash plug in does work with the Crome browser but it will not work with Internet explorer.
I looked in the manage add-ons and it says enabled.
I also went into the safety tab and deselected
Active X filtering.
Restarted and still does not work.
I need help.....
Chrome uses a different and separate plug-in.
There are things about IE you need to know, especially 11. Specifically:
"User-Agent Strings"
That doesn't mean a lot, I'm sure, but it's the root of your problems, and Flash Player has nothing to do with it.
Microsoft "rewrote" the User-Agent Strings for the abomination they call their latest and greatest browser. User-Agent Strings are what websites use to identify the browser you're using and provide the proper content for it's browser engine, like ActiveX stuff, and Flash or HTML5 video. Thanks to the geniuses in Redmond, WA, the User-Agent Strings for IE11 (which has a Trident engine), ID it as either "Gecko" (Firefox) or "Webkit" (Chrome). Problem is: when the site the directs to the content for one of these two engines, the Trident engine in IE can't intepret it and the site then sees IE as an "unidentified" browser.
The problem with an unidentified browser is that the plug-ins in that browser aren't recognized either, so even though you're up to date, it says you need the latest Flash Player when you use IE11. YouTube... has converted to HTML5 video so if it doesn't detect Flash Player, it can display HTML5 (MP4) video which requires no plug-in to play. Facebook can't do that, because HTML5 doesn't apply to games... only video.
Microsoft has no plans to "fix" the mess they've created because they think it's a great idea to block you out of the websites you visit.
They recommend using "Compatibility View" and pretending that you're using an older verison of IE... Problem with that is that it's seen limited success, and you have to enable it for EVERY page that has problems... individually.
I'm not big on "pretending" so I recommend actually using another browser.
Firefox (from Mozilla)
Opera (from Opera)
Safari (from Apple)
Chrome (from Google)
ANY of those will work where IE11 won't, with the Flash Player Plug-in (For all other browsers), and Chrome doesn't even need that because it has its own Flash Player plugin built in.

I can't get the convert to word command to work?

How do I get the Convert to Word function to work?

The pane next to the document has a space for the file name and the target conversion (Microsoft Word) and a conversion button. I press it and nothing happens, and no inquiry comes up asking for my Acrobat user name and password. Just no action. I I have Windows 7.
In a message dated 08/18/14 12:14:13 Pacific Daylight Time, [email protected] writes:
I can't get the convert to word command to work?
created by MichaelKazlow in Creating, Editing & Exporting PDFs - View the full discussion
What happens when you try? Error Messages? What version of Acrobat? What OS? Does the document have real text or is it a scan which is a picture of text?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6651867#6651867
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

HT5701 Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Downloaded Safari 6.0.4 and my software is not up to date to run it. I can not get the old version of Safari to work again.

Open  > About this Mac, and tell us what OS X version you have. If it's 10.8, reinstall OS X 10.8.3 > http://support.apple.com/kb/DL1640
If, after reinstalling the update, you still can't use Safari, hold Command and R keys while your computer is starting and reinstall Lion or Mountain Lion

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

I can record and hear me recording through the computer's built in mic, but can't get the external mic and headphones to work., The preferences are set for the external mic and headphones...

What operating system are you using? Is it on a Mac or a PC? Which preferences are set for external mic/headphones, Audition's or the computers?

Computer can't get the apple mobile usb driver to install?

I get the error that the computer can't get the apple mobile usb driver to install so it won't show up on my computer or in itunes.It actually says Device Driver Software Not Sucessfully installed. Apple Mobile Device USB Driver failed. I'm using windows 7 which is fully updated, I have downloaded the newest itunes and also uninstalled and reinstalled it ans all of its components. I have followed every guide to sync your device to the computer and itunes, none of it has worked. I have unplugged my computer and tried it, I have taken the battery out of the computer and waited a few minutes and tried it. I have even gone into Device Manager looked under universal USB controllers and see an exclamation point next to the apple driver where its not working. I can click on it and tell it to look for the newest software and it says it's up to date and still not working. I have tried ever single usb advice or apple advice I can find over the last 3 hours and nothing is working. Please someone help me. I need to restore my ipad and I can't get it to show in itunes! please someone help!

Make sure Apple Mobile Device USB driver is properly installed.

I can not get the right frequency out of my NI-DAQ 6062E card from Matlab

Hi.
My name is Johan and I want to generate an analog square waveform with 5.76 kb/s in frequency with my NI DAQCard-6062E from Matlab.
When I run in Matlab the program below, I get the frequency of 5.747 kb/s on the output channel (even thou I have chosen 5.76 kb/s). When I try to change the sample rate, to higher values in Matlab, I get the same frequency until I choose the sample rate to 5.79 kb/s. The output signal is in that case is 5.813 kb/s.
So my problem is that I can't get the exact frequency of 5.76 kb/s.
How do I solve this.
Thankful for help.
Best regards, Johan
Program in Matlab:
clear all
openDAQ=daqfind; %Detect any open DAQ channels
for i=1:length(openDAQ), %Close any open DAQ channels
stop(openDAQ(i));
end
ao = analogoutput('nidaq',1); %Create an object for analog output
addchannel(ao, [0 1]);
set(ao, 'SampleRate', 2*5760); %Here the sample rate is specied. 2*, because to get right samplerate
y=[80,-80] %Sets theoutput values to 80 and -80 (As -1 and 1)
putdata(ao, [y' y']); %Sends the values to out buffer
set(ao,'RepeatOutput',inf) %Repeats sending in infinity
set(ao, 'TriggerType', 'Immediate'); %Choose trigger to immediate, because sending values shall occur driect after start command.
start(ao);
%stop(ao)

Hello Johan!
Bad news I am afraid….
I assume you are using the Data Acquisition Toolbox from the Mathworks and when it comes to support on that interface I have to advice you to contact the Mathworks for assistance. We don't provide any support on their data acquisition interface since we have nothing to do with it.
Sorry for the inconvenience this might cause you.
Regards,
Jimmie A.
Applications Engineer, National Instruments
Regards,
Jimmie Adolph
Systems Engineer Manager, National Instruments Northern Region
Bring Me The Horizon - Sempiternal

How can I get the best quality video on YouTube?

I tried what you posted from another poster, Steve, but had a problem at step 2, the part in red.
2. Import this AVI file into Windows MovieMaker, place the file on MovieMaker's timeline and Publish (to your hard drive) a
WMV, dvd-quality (4:3 size) PAL 3,0 M.
When I click Publish, the only option I get is "YouTube" and "Get Add Ons".
Since the option I was told to take didn't exist, I clicked "save movie" and then "high definition 1080p". Hey I'm just trying to figure this stuff out. I'm new to it, so I picked the highest quality I could find.
Well, the result is a movie on YouTube that is OK, but nowhere near the quality of the movie on my computer. Just for fun, I uploaded the AVI file to YouTube from MovieMaker. It was a huge file, it did upload, but the quality was still not there.
So, I return to my original question, which is almost the same as the originally posted question:
How should I save video with Premiere Elements to get the highest quality video to post to YouTube? The videos were taken in AVCHD format, but after editing, I don't know the best rendering option to get the highest quality video when viewed on YouTube. The videos look great on my computer, but on YouTube, the video is really degraded.
Thanks for any help!
I have an i7 processor, 8 gigs or RAM, and am running Windows 7 x64. Video editing is with Premiere Elements and my video camera is a Canon HG10 that shoots AVCHD.

I had the best success using the John Cloudman method from the link you posted. The video was much better quality on YouTube (in my opinion) with this method than the method of going to Movie Maker etc. I tried John Cloudman's Frame widtht of 1280 and Frame Height of 720 and then frame width 1920 frame width by 720. I found 1920x1080 better quality on YouTube than Mr. Cloudman's 1280x720.
I pasted in the part of the link below that I found most useful. A big thanks to John Cloudman for posting this!!
John Cloudman offers further advice:
From the Share tab, choose Personal Computer and then QuickTime. Choose the Cable Modem, DSL preset and then click the Advanced button.
From the settings window, do the following:
b Video Tab
*Video Codec: H.264
*Quality: 100
*Frame Wdith: 1280
*Frame Height: 720
*Frame Rate: 29.97
*Field Order: None
*Pixel Aspect Ratio: square
*Set Bitrate: checked
*Bitrate: 8000 kbps
b Audio Tab
*Audio Code: AAC
*Output Channels: Stereo
*Frequency: 44kHz
That should generate a .mov file that Youtube will handle correctly. You can modulate that Bitrate to reduce the amount of data size, and you can modulate the Quality number to reduce the encoding time. I wouldn't go lower than 3000 kbps for a bitrate or below 50 on Quality. Hope this helps everyone!

[SOLVED] - Can't get the right Intel video driver to work!

Similar Messages

Maybe you are looking for