[SOLVED] Can't have working audio control from bar on xfce4

Hi guys,
i have xfce4 with alsa, i have installed and get working everything, except for the control of audio from top bar (now i'm using alsamixer to change volume, but is not very the best to use).
I followed the entire part on wiki about the volume, installed several packages, without any good results.
Someone can help me, please?
Thanks, Gabriele.
Last edited by Lilith (2012-11-30 15:02:23)

Ok, i'm yet a pretty noob.
Fixed doing this, first work like 10PinkPanther, added to panel, right click on speaker icon on panel, properties, switch sound card and press close.  Again right click, run audio mixer, switch also here the sound card.
Thanks guys.

Similar Messages

  • I can't delete my audio books from my music in my ipod.  have deleted them fromi tunes library. they are grey out in my ipod music folder and can do nothing with them.   can't accerss options under summary of my ipod either to operate manually. thanks den

    I. can't delete my audio books from 'my'music' in my ipod.  (have not had this problem for the 18mths I have had ipod) they are delEeted in itunes library but not in my ipod.  they show up in my music in i tunes but are greyed out and I can't do anythbng with them.   also can not acess options in my summary of my i pod  to operate manuanly.   nothing comes up in options.
    Thanks Denise

    Use Shift+Delete to remove items from a playlist and the library at the same time.
    tt2

  • HT201441 how can i create and audio cd from a music track I have on my ipod

    how can i create and audio cd from a music track I have on my ipod

    This is how:
    Go to:
    'File'
    'Share'
    'Quicktime'
    'Expert Settings'
    'Audio as AIFF' or pick your brand of compression.
    Drag and drop the resulting file into iTunes.
    Enjoy!
    P.S. - You didn't need to delete the video but I think that'll be okay.

  • I can not get an audio stream from any TV channel on ipad

    I can not get an audio stream from any TV channel on my ipad ,please help me fix this problem

    Muneer-
    What App are you using to get the audio stream?  Safari should work unless Flash is involved.
    I have used the free NPR App to listen to radio stations, but I don't know if it works with TV stations.
    Fred

  • How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

    How can I use mp4 audio files from my iTunes library in an Elements 10 slide show?

    AAC is Advanced Audio Coding.  Basically it's a format that sounds better than MP3 but doesn't take up as much space as a lossless format (like you'd have on a CD).  More than likely you've had that encoding turned on when you ripped your music into itunes (it's the default encoder).  Therefore your LG phone won't play them.
    You need to turn off the AAC format by going to the iTunes menu, Preferences, General (at the top), then clicking the "Import Preferences" button.  Change the AAC Encoder to MP3 Encoder.  After that you'll have to make MP3 copies of your songs by right clicking them and selecting "Create MP3 Version."  You'll get a copy of the song that should transfer to your SD card and have MP3 encoding.  Hopefully your phone will play that.

  • Can we have 2 credit control area for one sales organisation

    hi,
    sap gurus,
    good afternoon,
    can we have 2 credit control area for one sales organisation.
    plz explain the impact from taking fi and sd into consideration.
    regards,
    balaji.t
    09990019711

    Dear Balaji,
    We can't assign credit control area to the sales organisation
    Sales area will be assigned to the Credit control area
    Only one credit control area will be assigned to each sales area.
    More then one credit control area will not be assigned to single sales area.
    But one Credit control area we can assign to more than one sales areas.
    I hope it will help you,
    Regards,
    Murali.

  • How can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

    how can I copy an audio effect from a clip and paste it to another clip in the same timiline...With FCPro 7 it was all so fast........

    Tom Wolsky wrote:
    The advantage goes to FCP7 if you allow that it can copy and paste filters, audio and video, transformations, and other attributes separately.
    You can do that in FCPX too, as all the things you cited are listed separately in the inspector.
    Here's a little gotcha. Let's say you've color corrected a few clips and you've applied an effect to one and want to paste it the other clips. You switch off color correction and copy the clip. You select the other clips and paste effects. What do you think happens? The effect is applied, but the color correction is applied as well, only it's switched off as it was in the first clip, so all the color correction on the other clips is lost. Fun, eh?
    I'll try to replicate your gotcha - but no, that doesn't sound like fun at all!

  • How can I create an audio CD from the audio only portion of my iMovie?

    Hello, I brought in about 50 min of Digital video into iMovie, I separated (split) the audio from the video, I unlocked the audio, I deleted the video, and now I want to just create an audio CD from the audio that is left.
    Can I do this? and if yes how? If I can not, how can I create an Audio CD from on my G5 off a tape on my digital camcorder?
    Any help would be apprecaited.

    This is how:
    Go to:
    'File'
    'Share'
    'Quicktime'
    'Expert Settings'
    'Audio as AIFF' or pick your brand of compression.
    Drag and drop the resulting file into iTunes.
    Enjoy!
    P.S. - You didn't need to delete the video but I think that'll be okay.

  • HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

    I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

    You cannot.
    You cannot use another countrys itunes store.
    You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
    The owners of the distribution rights of movies/music/etc differ by country.  These distributors decide who can sell their content in that country.
    Buy from another source if your countrys itunes store does not carry somehting that you want.

  • Have 2004 eMac...screen goes black without notice. Getting a reconditioned 2005 eMac. Can I have the HD swapped from old eMac to reconditioned one without problems??? Black screen is called "collapse to black" and occurs 4-5 daily

    Have 2004 eMac...screen goes black without notice.  Black screen is called "collapse to black" and occurs 4-5 daily. From what I understand, this is due to bad capicators????? Found a reconditioned 2005 eMac on line. Can I have the HD swapped from old eMac to reconditioned eMac without problems???...with regards to software applications. Old eMac is running 10.4.11 and reconditioned on runs 10.5. Suggestions, tips would be greatly appreciated. Thank you.

    Might want to make sure both units are not affected. This is the range of serial number from the now-defunct Apple Repair Extention Program for USB 2.0 eMacs:
    G8412xxxxxx- G8520xxxxxx
    YM412xxxxxx - YM520xxxxxx
    VM440xxxxxx - VM516xxxxxx
    A "collapse" is more indicative of a video cabling issue, but the bad caps produced such a wide range of problems that it's hard to sort through them.
    If the old eMac is a USB 2.0, which a 2004 unit should be, the HD should exchange with the new one. As the last of the eMacs shipped with Tiger, the new computer should have no probelms with a 10.4 boot volume on the old drive. You can upgrade to Leopard one you have hte new disk in place.
    NOTE: Takeapart and reassembly on the USB 2.0 must be done "just so" or you can permanently damage the power switch. Instructions for the USB 1.1 takeapart are slightly different , and the power swtich damage is usually caused by people using the older instructions on a newer eMac.
    If you are not up to the takepart nor can you find a local computer tech who knows these. consider taking the drive out of the dead computer(won't make much difference if you damage that one as it's dead), buy an external Firewire enclosure, and put the old drive on it and use it to move data to the new computer. Then you can leave the external attached as a backup drive.
    Is the new one a 1.42Ghz model? They have been practically trouble-free around here. We have one and it's been rock solid since we bought it as a refurb in Jan 2006. The 1.42G has the advantage of a Core Image-enabled video chipset, the ATI 9600.
    And all USB 2.0 eMacs can, with modern memory modules, support up to 2G of RAM.

  • Can you have two detail lists from the basic list at the same time?

    Hi
    Can you have two detail lists from the basic list at the same time?
    If yes how and if no why?
    Thanks
    Venkat

    No   ... it is not   possible   of   2 detail  list at   one time   from the basic  list ...
    you can  increament   the SY-LSIND  .... But you can not   display  both the windows   at single time  ...
    it is  possible  to  display  2 Detail list  in ALV   ......  from one  basic  list   using  the  Blocked  list  concept    .
    Sample Program on BLOCK LISTS
    Report   zblock_list
    * Declarations for BLOCK ALV DISPLAY
    *--type pools
    TYPE-POOLS:slis.
    DATA:x_layout TYPE slis_layout_alv,
    t_field TYPE slis_t_fieldcat_alv,
    *--field catalog
    x_fldcat LIKE LINE OF t_field,
    *--to hold all the events
    t_events TYPE slis_t_event,
    x_events TYPE slis_alv_event,
    t_sort TYPE slis_t_sortinfo_alv,
    x_sort LIKE LINE OF t_sort ,
    *--Print Layout
    x_print_layout TYPE slis_print_alv.
    *----Macro to add field catalog.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    DEFINE add_catalog.
    clear x_fldcat.
    x_fldcat-fieldname = &1.
    x_fldcat-seltext_m = &2.
    x_fldcat-outputlen = &3.
    x_fldcat-tech = &4.
    x_fldcat-col_pos = &5.
    x_fldcat-no_zero = 'X'.
    x_fldcat-ddictxt = 'M'.
    x_fldcat-datatype = &6.
    x_fldcat-ddic_outputlen = &7.
    if &6 = 'N'.
    x_fldcat-lzero = 'X'.
    endif.
    *--build field catalog
    append x_fldcat to t_field.
    END-OF-DEFINITION.
    *----- data declerations.
    data: v_repid like sy-repid.
    data: begin of itab occurs 0,
    matnr like mara-matnr,
    ernam like mara-ernam,
    meins like mara-meins,
    end of itab.
    data: begin of jtab occurs 0,
    matnr like makt-matnr,
    maktx like makt-maktx,
    end of jtab.
    select matnr ernam meins
    up to 20 rows
    from mara
    into table itab.
    select matnr maktx
    up to 20 rows
    from makt
    into table jtab.
    v_repid = sy-repid.
    *DISPLAY alv
    * Initialize Block
    call function 'REUSE_ALV_BLOCK_LIST_INIT'
    exporting
    i_callback_program = v_repid.
    *Block 1:
    *INITIALIZE
    refresh t_field. clear t_field.
    refresh t_events.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    add_catalog:
    'MATNR' 'Material' '18' '' '1' 'C' '18',
    'ERNAM' 'Created By' '12' '' '2' 'C' '12',
    'MEINS' 'Unit' '5' '' '3' 'C' '3'.
    *--build table for events.
    x_events-form = 'TOP_OF_LIST1'.
    x_events-name = slis_ev_top_of_list.
    append x_events to t_events.
    call function 'REUSE_ALV_BLOCK_LIST_APPEND'
    exporting
    is_layout = x_layout
    it_fieldcat = t_field
    i_tabname = 'ITAB'
    it_events = t_events
    it_sort = t_sort
    tables
    t_outtab = itab
    exceptions
    program_error = 1
    maximum_of_appends_reached = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    *--BLOCK 2(SUMMARY REPORT)
    *INITIALIZE
    refresh t_field. clear t_field.
    refresh t_events.
    *field "text "length "tech "COL_POS "DATATYPE "DDIC_OUTPUTLEN
    add_catalog:
    'MATNR' 'Material' '20' '' '1' 'C' '18',
    'MAKTX' 'Description' '40' '' '2' 'C' '40'.
    *--build table for events.
    x_events-form = 'TOP_OF_LIST2'.
    x_events-name = slis_ev_top_of_list.
    append x_events to t_events.
    * Append table block.
    call function 'REUSE_ALV_BLOCK_LIST_APPEND'
    exporting
    is_layout = x_layout
    it_fieldcat = t_field
    i_tabname = 'JTAB'
    it_events = t_events
    tables
    t_outtab = jtab
    exceptions
    program_error = 1
    maximum_of_appends_reached = 2
    others = 3.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    *--CALL FM TO DISPLAY THE BLOCK REPORT.
    call function 'REUSE_ALV_BLOCK_LIST_DISPLAY'
    * exporting
    * is_print = x_print_layout
    exceptions
    program_error = 1
    others = 2.
    if sy-subrc <> 0.
    message id sy-msgid type sy-msgty number sy-msgno
    with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    endif.
    form top_of_list1.
    skip 1.
    write: 10 'List 1',
    /5 '--------------------'.
    skip 1.
    format reset.
    endform.
    form top_of_list2.
    skip 1.
    write: 10 'List 2',
    /5 '--------------------'.
    skip 1.
    format reset.
    endform.
    reward  points if it is  usefull ....
    Girish

  • Can I have 2 online numbers from 2 different count...

    Basically the subject is self explanatory:
    Can I have 2 online numbers from 2 different countries on 1 Skype account?

    You should be able to do this.  You'll have to have separate Apple IDs and it would require to go to
    Settings > iTunes and App Store
    Tap your Apple ID
    Sign Out
    Then Sign in with the ID you use in that country.  You will neeed a valid credit card in each country.

  • [Solved] Can't Start Pulse Audio and No Sound/Volume Controls

    Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it.  I tried killing pulseaudio and restarting but I keep getting the same error:
    pulseaudio -k:
    E: [pulseaudio] main.c: Failed to kill daemon: No such process
    pulseaudio --start:
    E: [pulseaudio] main.c: Daemon startup failed.
    start-pulseaudio-x11:
    Connection failure: Connection refused
    pa_context_connect() failed: Connection refused
    This is the output of pulseaudio -v:
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    I: [pulseaudio] main.c: Page size is 4096 bytes
    I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
    I: [pulseaudio] main.c: Session ID is c2.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
    I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
    I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
    I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
    I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
    I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
    I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
    I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
    I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
    I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
    I: [pulseaudio] sink.c: device.api = "alsa"
    I: [pulseaudio] sink.c: device.class = "sound"
    I: [pulseaudio] sink.c: alsa.class = "generic"
    I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
    I: [pulseaudio] sink.c: alsa.subdevice = "0"
    I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] sink.c: alsa.device = "3"
    I: [pulseaudio] sink.c: alsa.card = "1"
    I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] sink.c: device.bus = "pci"
    I: [pulseaudio] sink.c: device.vendor.id = "1002"
    I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] sink.c: device.product.id = "aac0"
    I: [pulseaudio] sink.c: device.string = "hdmi:1"
    I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
    I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
    I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
    I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
    I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
    I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
    I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: alsa.card = "1"
    I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
    I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
    I: [pulseaudio] source.c: device.bus = "pci"
    I: [pulseaudio] source.c: device.vendor.id = "1002"
    I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    I: [pulseaudio] source.c: device.product.id = "aac0"
    I: [pulseaudio] source.c: device.string = "1"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
    I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
    I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
    I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
    I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
    I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
    I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
    I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
    I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
    I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
    I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
    I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
    I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
    I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
    I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
    I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
    I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
    I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
    I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
    I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
    I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
    I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
    I: [pulseaudio] source.c: alsa.resolution_bits = "16"
    I: [pulseaudio] source.c: device.api = "alsa"
    I: [pulseaudio] source.c: device.class = "sound"
    I: [pulseaudio] source.c: alsa.class = "generic"
    I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
    I: [pulseaudio] source.c: alsa.name = "USB Audio"
    I: [pulseaudio] source.c: alsa.id = "USB Audio"
    I: [pulseaudio] source.c: alsa.subdevice = "0"
    I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
    I: [pulseaudio] source.c: alsa.device = "0"
    I: [pulseaudio] source.c: alsa.card = "2"
    I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
    I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
    I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
    I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
    I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
    I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] source.c: device.bus = "usb"
    I: [pulseaudio] source.c: device.vendor.id = "1415"
    I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
    I: [pulseaudio] source.c: device.product.id = "2000"
    I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
    I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
    I: [pulseaudio] source.c: device.string = "hw:2"
    I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
    I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
    I: [pulseaudio] source.c: device.access_mode = "mmap"
    I: [pulseaudio] source.c: device.profile.name = "multichannel"
    I: [pulseaudio] source.c: device.profile.description = "Multichannel"
    I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
    I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
    I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
    I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
    I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
    I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
    I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
    I: [pulseaudio] module-udev-detect.c: Found 3 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
    I: [pulseaudio] client.c: Created 0 "Login Session c2"
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.
    I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
    I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
    I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
    I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
    I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
    I: [pulseaudio] client.c: Freed 0 "Login Session c2"
    I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
    I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
    I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
    I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
    I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
    I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
    I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
    I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
    I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
    I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
    I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
    I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
    I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
    I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
    I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
    I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
    I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
    I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
    I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
    I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
    I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
    I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
    I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
    I: [pulseaudio] main.c: Daemon terminated.
    When I start pavucontrol I get this:
    Can someone help me correct what the issue is, please let me know if you need more information.
    Thanks in advance.
    Last edited by Dobbie03 (2015-05-15 20:35:02)

    I tried "pulseaudio" in the terminal and get the following:
    W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
    E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
    E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
    E: [pulseaudio] main.c: Module load failed.
    E: [pulseaudio] main.c: Failed to initialize daemon.

  • Can I sync my audio books from my iPod touch onto iTunes on my computer using only my computer?? My iPod is MIA, could have been stolen.

    I'm trying to determine whether or not I can import audio books from my iPod to my computer using only my computer. I purchased said audio books through the same iTunes account on my iPod that I have on my computer. I can't sync manually from my iPod because I haven't been able to locate it in weeks!! Is it possible to use only my laptop?

    The music sync is one way only - computer to ipod.  The exception is itunes purchases.  Without syncing:  File>Transfer Purchases
    Copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • How can I delete the audio track from a clip and have no audio associated?

    the clips I insert always add an audio track,and seem to be linked to video track.I just want to delete audio tracks,and have no audio track associated with the original clips .
    How do I do this ???

    Second time this question came up today.
    Click the a1/a2 buttons in the patch panel at the head of the timeline to decouple the audio from A1/A2. Then edit the picture into the timeline.

Maybe you are looking for

  • Process type "Delete overlapping request in cube " in process chain

    Hi can somebody suggest me where i need to place the process type "Delete overlapping request" for an infocube. Regards,

  • Duplicate Records in CFMAIL

    I think I have done this before but I cannot remember the code or command. Bascially, I want ot output records in cfmail, identical to the cfoutput I have on the screen. I use the exact same code for the cfmail but it is duplicating everything 100 ti

  • Merging X XML files, sorting the resultlist and finally execute a distinct?

    I have several questions about an XSLT file that I should write: 1� First, I get X paths to XML files. It can be 2, 3, 4, ... whatever a number. I don't know exactly the total amount of XML files. I need to merge them dynamicly to one resultset. 2� N

  • WLC 2106 comes up after rebooting

    Hello. I have installed a wlc2106 (ver 6.0.199.4).Everything was working fine until today... Wlc seems that looses connectivity with core switch (3750).That time i couldn't ping the management ip and i couldn't see it with cdp. After rebooting the co

  • STO  rel order dates changes

    Hi, In MD04 Stock Requirements for two plants 0011 and 0012. Plant 0012 has a Stock Transport Purchase Order STO001/10 where it is buying from the sending plant of 0011 and an arrival date of 09/21/07.  Plant 0011 has the demand side of the Stock Tra