[solved]can't start gnome as user
I can't start gnome as user only as root.
error message: failed to create file /tmp/gconf-test-locking-file-kx6h6t:Permission denied (error=13)
I think this is an pacman error (permissions)
I made an clean install because last pacman -Syu crash my os.
And i get the error as above so i can't get it to work.
I also tried to run enlightment but several applications don't start.
How to solve this?
Solution was i wiki :chmod 1777 /tmp
Last edited by fernux (2008-02-11 20:39:41)
error message: failed to create file /tmp/gconf-test-locking-file-kx6h6t:Permission denied (error=13)
this is the problem, it states that it can't create a file because of a lack of permissions to do so. Its trying to create the file in /tmp, so that tells us that /tmp directory has permissions that aren't correct or gnome would work. What u need to do is
ls -ld /tmp
and post the results here so someone can tell u how to put the correct permissions up.
edit: I see u found the answer yourself.
Last edited by jacko (2008-02-11 20:42:30)
Similar Messages
-
Can't start gnome-session after system update.
hi all
I have done a whole system update .
pacman -Syu
and now I can't start the desktop environment.
I tried to delete the xorg.conf and create new 1 and then copy it to /etc/X11
X -configure
but that didn't work.
and when I am trying to create new xorg file I got an error message telling me that the number of screens detected is not matched , I am using a laptop .
I checked ~/.xinitrc and /etc/rc.conf and everything is right.
any suggestion??
Last edited by YYaaSSeeRR (2012-11-19 08:11:06)ETNyx wrote:
Hi,
you did not give enough information but i had simillar problem cant start gdm look there https://bbs.archlinux.org/viewtopic.php?id=153240 anyway search trought your logs or post them to forum
when I am trying to create new xorg file through this order
X -configure
I get an error message telling me that the number of created screens doesn't match the number of detected devices. "I am using a laptop BTW".
and I can't log in, I just got the black screen and when launching startx I got the gnome shell session but after 2 seconds of that I got a failure in Gnome and have to log out.
Last edited by YYaaSSeeRR (2012-11-20 07:25:55) -
[SOLVED] Can't Start MySQL after upgrading to 5.1.41-3
I can't start mysqld with 'mysqld start'.Here is my mysqld output:
[ahao@sky ~]$ mysqld start
091125 18:33:48 [Note] Plugin 'FEDERATED' is disabled.
091125 18:33:48 [Note] Plugin 'ndbcluster' is disabled.
091125 18:33:48 InnoDB: Started; log sequence number 0 44233
mysqld: Too many arguments (first extra is 'start').
Use --verbose --help to get a list of available options
091125 18:33:48 [ERROR] Aborting
091125 18:33:48 InnoDB: Starting shutdown...
091125 18:33:49 InnoDB: Shutdown completed; log sequence number 0 44233
091125 18:33:49 [Note] mysqld: Shutdown complete
This is my /var/lib/ complete with permission settings:
[ahao@sky ~]$ cd /var/lib ; ls -al
total 84
drwxr-xr-x 20 root root 4096 2009-11-25 18:08 .
drwxr-xr-x 13 root root 4096 2009-11-25 13:51 ..
drwxrwx--- 2 root policykit 4096 2009-05-10 09:10 PolicyKit
drwxr-xr-x 2 policykit root 4096 2009-05-10 09:10 PolicyKit-public
drwxr-xr-x 3 root root 4096 2009-09-19 12:19 bluetooth
drwxr-xr-x 2 root root 4096 2009-09-16 22:09 dbus
drwxr-xr-x 2 root root 4096 2009-11-23 17:38 dhcpcd
drwxrwxrwt 2 root root 4096 2009-07-19 18:17 ex
drwxr-xr-x 2 root root 4096 2009-09-16 22:38 hwclock
drwxr-x--- 2 root locate 4096 2009-10-22 06:55 locate
-rw-r--r-- 1 root root 462 2009-09-20 00:02 logrotate.status
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 misc
drwxr-x--- 2 root locate 4096 2009-11-25 18:09 mlocate
drwxrwxrwx 4 mysql mysql 4096 2009-11-25 18:33 mysql
drwxr-xr-x 6 root root 4096 2009-09-07 08:54 nfs
drwxr-xr-x 4 root root 4096 2009-11-25 18:08 pacman
drwx------ 3 root root 4096 2009-11-21 03:30 polkit-1
drwxr-xr-x 2 root root 4096 2008-09-06 14:33 rarian
drwxr-xr-x 2 root root 4096 2009-09-17 09:14 syslog-ng
drwxr-xr-x 3 root root 4096 2009-10-19 20:10 wicd
drwxr-xr-x 2 root root 4096 2009-11-21 02:35 xkb
/etc/mysql/my.cnf is out-of-the-box
What seems to be the problem here? Please shed some light...thank you
Last edited by akiglobal (2009-11-26 07:41:00)How silly of me.....first of all...I entered 'mysqld start', I should have just entered 'mysqld', second of all, I didn't change the file permission on /var/run/mysqld. I change /var/run/mysqld file permission into 'chmod 777 /var/run/mysqld -R', after that mysql works!
-
[Solved] Can't start GParted from XFCE menu
Hi,
I have polkit installed but I can't start GParted from the XFCE menu. Do I need to edit any configuration files to make this work? The wiki isn't very clear about what to do after installing polkit. Thanks.
Last edited by kaixi (2012-11-02 15:09:12)In my Xfce4 installation, it's /usr/share/applications/GParted, which I copied over to ~/.local/share/applications/, as kaixi suggested, and it appeared there as gparted.desktop. Right-click for Properties > Launcher > Command, and in that field (not wanting to install gksu) I put sudo gparted, which works, thanks.
-
[SOLVED] Can't start pulseaudio with other users?
I am having trouble getting pulseaudio to start using a different user. The user "corey" can run pulse just fine. After logging out and logging in on user "tv", running pulseaudio --start returns this error message:
E [autospawn] core-util.c: Failed to create secure directory: Operation not permitted
W [autospawn] lock-autospawn.c: Cannot access autospawn lock.
E [pulseaudio] main.c: Failed to acquire autospawn lock
So it seems this user does not have permission? I can't imagine why, both corey and tv are in the audio group and both had active consolekit sessions at the time.
I don't know if this is relative information but I'll throw it out there anyway. I have a multiseat configuration with 2 seats, 1 at my desktop the other for my tv however for right now I am just logging into the display at my desktop. I followed most of the relative information about pulseaudio and multiseat from this page on the gentoo wiki (including editing the config files Xstartup and Xreset): here
consolekit though seems to be acting wierd, right now ck-list-sessions produces this:
Session3:
unix-user = '1000'
realname = 'Corey Teetor'
seat = 'Seat1'
session-type = ''
active = FALSE
x11-display = ':0'
x11-display-device = '/dev/tty7'
display-device = ''
remote-host-name = ''
is-local = TRUE
on-since = '2012-02-17T06:19:44.835923Z'
login-session-id = '4294967295'
Session1:
unix-user = '1001'
realname = 'The Television'
seat = 'Seat1'
session-type = ''
active = TRUE
x11-display = ''
x11-display-device = ''
display-device = '/dev/tty1'
remote-host-name = ''
is-local = TRUE
on-since = '2012-02-17T06:13:33.618814Z'
login-session-id = '1'
it says that the session for corey is not active even though i am logged in right now and pulse is running. I am a bit confused...please share your wisdom with me!
Last edited by cteeto (2012-02-18 16:47:51)cteeto wrote:Thank you good sir, it worked Next time I should probably try googleing it myself huh?
No problem at all , could you edit the title of the post to say solved please, Thanks. -
[SOLVED]After a logout/in , can't start conky as user.
I logged out of my xfce session. Logged back in and conky did not start.
I now get this error:
xxx@xxx~]$ conky -c ~/AccuW_2/accuw.Toronto.conky
[1] 1442
bash: -c: command not found
[xxx@xxx ~]$ conky: no process found
No changes at all were made to the computer. No software was uninstalled/reinstalled.
Here is my conky config that I've been using for months:
## killall conky && conky -c ~/AccuW_2/accuw.Toronto.conky &
# 1e_Accuweather_USA_Images script by TeoBigusGeekus
# http://crunchbanglinux.org/forums/post/212605/
### Begin Window Settings ##################################################
# Create own window instead of using desktop (required in nautilus)
own_window yes
# Use the Xdbe extension? (eliminates flicker)
# It is highly recommended to use own window with this one
# so double buffer won't be so big.
double_buffer yes
own_window_type normal #override
own_window_transparent yes
#own_window_hints undecorated,below,skip_taskbar,skip_pager
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_colour black
own_window_class Conky
own_window_title tedbell
### ARGB can be used for real transparency
### NOTE that a composite manager is required for real transparency.
### This option will not work as desired (in most cases) in conjunction with
### own_window_type override
# own_window_argb_visual yes
### When ARGB visuals are enabled, this use this to modify the alpha value
### Use: own_window_type normal
### Use: own_window_transparent no
### Valid range is 0-255, where 0 is 0% opacity, and 255 is 100% opacity.
#own_window_argb_value 150
#minimum_size 310 0 ## width, height
maximum_width 310 ## width, usually a good idea to equal minimum width
gap_x 10 ### left &right
gap_y 10 ### up & down
alignment top_right
#################################################### End Window Settings ###
### Font Settings ##########################################################
# Use Xft (anti-aliased font and stuff)
use_xft yes
xftfont MonoCondensed:bold:size=10
# Alpha of Xft font. Must be a value at or between 1 and 0 ###
xftalpha 1
# Force UTF8? requires XFT ###
override_utf8_locale yes
draw_shades yes #no #### <<<--- To see it easier on light screens.
default_shade_color black
draw_outline yes #no #### <<<--- Amplifies text if yes
default_outline_color black
uppercase no
###################################################### End Font Settings ###
### Color Settings #########################################################
default_shade_color gray
default_outline_color black
default_color DCDCDC #Gainsboro
color0 ffe595 #Teo Gold
color1 778899 #LightSlateGrey
color2 FF8C00 #Darkorange
color3 7FFF00 #Chartreuse
color4 FFA07A #LightSalmon
color5 000000 #NavajoWhite
color6 00BFFF #DeepSkyBlue
color7 00FFFF #Cyan #48D1CC #MediumTurquoise
color8 FFFF00 #Yellow
color9 FF0000 #Red #A52A2A #DarkRed
##################################################### End Color Settings ###
### Borders Section ########################################################
draw_borders no
# Stippled borders?
stippled_borders 0
# border margins
border_inner_margin 5
border_outer_margin 0
# border width
border_width 0
# graph borders
draw_graph_borders no
##################################################### End Borders Secton ###
### Miscellaneous Section ##################################################
# Boolean value, if true, Conky will be forked to background when started.
background no
# Adds spaces around certain objects to stop them from moving other things
# around, this only helps if you are using a mono font
# Options: right, left or none
use_spacer right
# Default and Minimum size is 256 - needs more for single commands that
# "call" a lot of text IE: bash scripts
text_buffer_size 256
# Subtract (file system) buffers from used memory?
no_buffers yes
# change GiB to G and MiB to M
short_units yes
# Like it says, ot pads the decimals on % values
# doesn't seem to work since v1.7.1
pad_percents 2
# Maximum size of user text buffer, i.e. layout below TEXT line in config file
# (default is 16384 bytes)
# max_user_text 16384
############################################## End Miscellaneous Section ###
### LUA Settings ###########################################################
## Above and After TEXT - requires a composite manager or blinks.
# lua_load ~/Conky/LUA/draw-bg.lua
#TEXT
#${lua conky_draw_bg 10 0 0 0 0 0x000000 0.6}
## ${lua conky_draw_bg corner_radius x_position y_position width height color alpha}
## OR Both above TEXT (No composite manager required - no blinking!)
lua_load ~/Conky/LUA/draw-bg.lua
lua_draw_hook_pre draw_bg 5 0 0 0 0 0x000000 0.0
####################################################### End LUA Settings ###
# The all important - How often conky refreshes.
# If you have a "Crey" try: 0.2 - smokin' - but watch the CPU useage go UP!
update_interval 1
## ${image ~/Conky/images/red_1.png -p 0,15 -s 67x40}
## ${image ~/Conky/images/red_1.png -p 165,52 -s 125x75}
## $HOME/AccuW_2/Toronto/acc_int_images
default_bar_size 100 12
# stuff after 'TEXT' will be formatted on screen
TEXT
${color0}${time %A %d %b %Y} ${color1}--${color0} Scarborough, ON ${color1}--${color0} ${time %T}${color}\
${texeci 500 bash $HOME/AccuW_2/Toronto/acc_int_images}\
${image $HOME/AccuW_2/Toronto/cc.png -p 220,25 -s 67x40}
${execpi 600 sed -n '1p' $HOME/AccuW_2/Toronto/messages}
${font Instruction:size=20} Now ${execpi 600 sed -n '29p' $HOME/AccuW_2/Toronto/curr_cond}${goto 120} FL ${execpi 600 sed -n '30p' $HOME/AccuW_2/Toronto/curr_cond}${font}
${color0}Wind: ${color}${execpi 600 sed -n '31p' $HOME/AccuW_2/Toronto/curr_cond} ${execpi 600 sed -n '32p' $HOME/AccuW_2/Toronto/curr_cond}\
${color0}Today Tonight${color}
${color0}Hum: ${color}${execpi 600 sed -n '33p' $HOME/AccuW_2/Toronto/curr_cond}\
${font Toronto Subway:size=14}${goto 170}${color6}${execpi 600 sed -n '26p' $HOME/AccuW_2/Toronto/first_days}${color}\
${goto 210}${color9}${execpi 600 sed -n '27p' $HOME/AccuW_2/Toronto/first_days}${color}\
${goto 245}${color6}${execpi 600 sed -n '32p' $HOME/AccuW_2/Toronto/first_days}${color}\
${goto 290}${color9}${execpi 600 sed -n '31p' $HOME/AccuW_2/Toronto/first_days}${color} ${font}
${color0}Bar: ${color}${execpi 600 sed -n '34p' $HOME/AccuW_2/Toronto/curr_cond}\
${image $HOME/AccuW_2/Toronto/tod.png -p 160,100 -s 67x40}\
${image $HOME/AccuW_2/Toronto/ton.png -p 235,100 -s 67x40}
${color0}Cloud: ${color}${execpi 600 sed -n '35p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}UVI: ${color}${execpi 600 sed -n '36p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}Vis: ${color}${execpi 600 sed -n '38p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}DP: ${color}${execpi 600 sed -n '37p' $HOME/AccuW_2/Toronto/curr_cond}°
${color0}Sunrise: ${color}${execpi 600 sed -n '39p' $HOME/AccuW_2/Toronto/curr_cond}\
${goto 160}${color0} Sunset: ${color}${execpi 600 sed -n '40p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}Moonrise: ${color}${execpi 600 sed -n '41p' $HOME/AccuW_2/Toronto/curr_cond}\
${goto 160}${color0}Moonset: ${color}${execpi 600 sed -n '42p' $HOME/AccuW_2/Toronto/curr_cond}
${color0}9 DAY FORECAST ${color1}${hr}${color}
${color1}${execpi 600 sed -n '5p' $HOME/AccuW_2/Toronto/first_days}\
${execpi 600 sed -n '10p' $HOME/AccuW_2/Toronto/first_days}\
${execpi 600 sed -n '15p' $HOME/AccuW_2/Toronto/first_days}${color}\
${image $HOME/AccuW_2/Toronto/6.png -p 5,232 -s 67x40}\
${image $HOME/AccuW_2/Toronto/11.png -p 120,232 -s 67x40}\
${image $HOME/AccuW_2/Toronto/16.png -p 220,232 -s 67x40}
${font Toronto Subway:size=11}
${color6}${execpi 600 sed -n '8p' $HOME/AccuW_2/Toronto/first_days}°\
${color6}${goto 180}${execpi 600 sed -n '13p' $HOME/AccuW_2/Toronto/first_days}°\
${color6}${goto 283}${execpi 600 sed -n '18p' $HOME/AccuW_2/Toronto/first_days}°
${color9}${execpi 600 sed -n '9p' $HOME/AccuW_2/Toronto/first_days}°\
${color9}${goto 180}${execpi 600 sed -n '14p' $HOME/AccuW_2/Toronto/first_days}°\
${color9}${goto 283}${execpi 600 sed -n '19p' $HOME/AccuW_2/Toronto/first_days}° ${font}${color}
${color1} ${execpi 600 sed -n '20p' $HOME/AccuW_2/Toronto/first_days}\
${execpi 600 sed -n '1p' $HOME/AccuW_2/Toronto/last_days}\
${execpi 600 sed -n '6p' $HOME/AccuW_2/Toronto/last_days}${color}\
${image $HOME/AccuW_2/Toronto/21.png -p 5,310 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_2.png -p 120,310 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_7.png -p 223,310 -s 67x40}
${font Toronto Subway:size=11}
${color6}${execpi 600 sed -n '23p' $HOME/AccuW_2/Toronto/first_days}°\
${color6}${goto 180}${execpi 600 sed -n '4p' $HOME/AccuW_2/Toronto/last_days}°\
${color6}${goto 283}${execpi 600 sed -n '9p' $HOME/AccuW_2/Toronto/last_days}°
${color9}${execpi 600 sed -n '24p' $HOME/AccuW_2/Toronto/first_days}°\
${color9}${goto 180}${execpi 600 sed -n '5p' $HOME/AccuW_2/Toronto/last_days}°\
${color9}${goto 283}${execpi 600 sed -n '10p' $HOME/AccuW_2/Toronto/last_days}° ${font}
${color1} ${execpi 600 sed -n '11p' $HOME/AccuW_2/Toronto/last_days}\
${execpi 600 sed -n '16p' $HOME/AccuW_2/Toronto/last_days}\
${execpi 600 sed -n '21p' $HOME/AccuW_2/Toronto/last_days}${color}\
${image $HOME/AccuW_2/Toronto/last_12.png -p 5,385 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_17.png -p 120,385 -s 67x40}\
${image $HOME/AccuW_2/Toronto/last_22.png -p 225,385 -s 67x40}
${font Toronto Subway:size=11}
${color6}${execpi 600 sed -n '14p' $HOME/AccuW_2/Toronto/last_days}°\
${color6}${goto 180}${execpi 600 sed -n '19p' $HOME/AccuW_2/Toronto/last_days}°\
${color6}${goto 283}${execpi 600 sed -n '24p' $HOME/AccuW_2/Toronto/last_days}°
${color9}${execpi 600 sed -n '15p' $HOME/AccuW_2/Toronto/last_days}°\
${color9}${goto 180}${execpi 600 sed -n '20p' $HOME/AccuW_2/Toronto/last_days}°\
${color9}${goto 283}${execpi 600 sed -n '25p' $HOME/AccuW_2/Toronto/last_days}° ${font}
${color0}COMPUTER ${color1}${hr}${color}
${font Instruction:size=7.5}
${color1}CPU0:${goto 70}${color7}${cpubar cpu0}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${cpu cpu0}%${color}${goto 190}${color7}${execi 8 sensors | grep 'Core 0:' | cut -c16-17}°
${color1}CPU1:${goto 70}${color6}${cpubar cpu1}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${cpu cpu1}%${color}${goto 190}${color6}${execi 8 sensors | grep 'Core 1:' | cut -c16-17}°
${color1}RAM:${goto 70}${color4}${membar}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${memperc}%${color4}${goto 190}$mem/$memmax${font}
${color0}DISK ${color1}${hr}${color}
${color1}sda: ${color9}Write: ${diskio_write /dev/sda} ${color3}Read: ${diskio_read /dev/sda} ${color8}Temp: ${color8}${execpi 15 hddtemp -n /dev/sda} °
${font Instruction:size=7.5}
${color1}/:${goto 70}${color2}${fs_bar /}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${fs_used_perc /} %${color2}\
${goto 190}${fs_used /}/${fs_size /}
${color1}/home:${goto 70}${color8}${fs_bar /home}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${fs_used_perc /home} %${color8}\
${goto 190}${fs_used /home}/${fs_size /home}
${color1}../sda3:${goto 70}${color0}${fs_bar /media/sda3}${goto 70}${color1}${cpubar cpu4}${goto 80}${color5}${fs_used_perc /media/sda3} %${color0}\
${goto 190}${fs_used /media/sda3}/${fs_size /media/sda3}${font}
${color0}NETWORK ${color1}${hr}${color}
${color1}wlan0: ${color9}Down: ${downspeedf wlan0}${color3}Up: ${upspeedf wlan0}
${color8}RX${goto 110}${color8}TX${goto 200}${color8}Total
${color0}Today:${color}
${color} ${execi 300 vnstat -i wlan0 | grep "today" | awk '{print $2 $3}'}\
${color}${goto 110}${execi 300 vnstat -i wlan0 | grep "today" | awk '{print $5 $6}'}\
${color}${goto 200}${execi 300 vnstat -i wlan0 | grep "today" | awk '{print $8 $9}'}${color}
${color0}Yesterday:${color}
${color} ${execi 300 vnstat -i wlan0 | grep "yesterday" | awk '{print $2 $3}'}\
${color}${goto 110}${execi 300 vnstat -i wlan0 | grep "yesterday" | awk '{print $5 $6}'}\
${color}${goto 200}${execi 300 vnstat -i wlan0 | grep "yesterday" | awk '{print $8 $9}'}${color}
${color0}Last Week:${color}
${color} ${execi 300 vnstat -w -i wlan0 | grep "current week" | awk '{print $3 $4}'}\
${color}${goto 110}${execi 300 vnstat -w -i wlan0 | grep "current week" | awk '{print $6 $7}'}\
${color}${goto 200}${execi 300 vnstat -w -i wlan0 | grep "current week" | awk '{print $9 $10}'}${color}
${color0}${time %B}:${color}
${color} ${execi 300 vnstat -m -i wlan0 | grep "`date +"%b '%y"`" | awk '{print $3 $4}'}\
${color}${goto 110}${execi 300 vnstat -m -i wlan0 | grep "`date +"%b '%y"`" | awk '{print $6 $7}'}\
${color}${goto 200}${execi 300 vnstat -m -i wlan0 | grep "`date +"%b '%y"`" | awk '{print $9 $10}'} ${color}
Can anyone tell me how to get it to be able to run as user again. I've traced the problem down to that.
Thanks,
Last edited by tedbell (2012-08-14 11:22:09)DSpider wrote:
tedbell wrote:
P.s. In never needed the '&' to run this. If it matters, I edited my bash rc to alias the command to just 'conky'
alias conky='killall conky && conky -c ~/AccuW_2/accuw.Toronto.conky &'
Ok, there's your problem. When you're running "$ conky -c ~/AccuW_2/accuw.Toronto.conky", you're effectively running:
$ <insert 'conky' alias here> -c ~/AccuW_2/accuw.Toronto.conky
Or in other words:
$ killall conky && conky -c ~/AccuW_2/accuw.Toronto.conky & -c ~/AccuW_2/accuw.Toronto.conky
Heh. Told you this belongs in the newbie section.
There's an "-c ~/AccuW_2/accuw.Toronto.conky" appendage at the end that Bash doesn't know how to interpret.
I guess I never noticed the problem because conky always autostarted. I deleted the line and restarted and everything works now. Thanks!
Mods. move this to newbie or better yet delete it, it's embarassing. -
[SOLVED] Can't start compiz with gnome
When I set up gnome initially, I used the following wiki guide:
https://wiki.archlinux.org/index.php/Co … k_Users.29
I had some issues after upgrading to gnome 3.8 that have now since been solved. I wen't through quite a bit trying to fix it and now somehow compiz isn't starting with my gnome/compiz session. It starts just fine if I run
$ compiz ccp --replace
after logging into the session. I think I'm simply not understanding how this session that I've installed works (or .session files in general).
here is my /usr/share/gnome-session/sessions/gnome-compiz.session:
[GNOME Session]
Name=GNOME Compiz
RequiredComponents=compiz;cairo-dock;gnome-settings-daemon;
RequiredProviders=notifications;
DefaultProvider-windowmanager=compiz
DefaultProvider-notifications=notification-daemon
I tried removing cairo-dock from the above file just to make sure that this is the file actually being used and it did start up without the dock as I guessed. Obviously this file is being used. Why won't compiz start as well? I also tried adding gnome-panel to the file and gnome-panel did not start. Is this because it needs a .desktop file as well? I assume so.
Here is my /usr/share/xsessions/gnome-compiz.desktop:
[Desktop Entry]
Encoding=UTF-8
Name=GNOME/Compiz
Comment=This session logs you into the GNOME desktop environment with Compiz and Cairo-Dock
Exec=/usr/bin/gnome-session --session=gnome-compiz
Icon=compiz
Type=XSession
and here is my /usr/share/applications/compiz.desktop:
[Desktop Entry]
Type=Application
Encoding=UTF-8
Name=Compiz
Exec=bash -c 'compiz --replace --sm-client-id $DESKTOP_AUTOSTART_ID --keep-desktop-hints ccp decoration'
NoDisplay=true
# name of loadable control center module
X-GNOME-WMSettingsModule=compiz
# autostart phase
X-GNOME-Autostart-Phase=WindowManager
X-GNOME-Provides=windowmanager
# name we put on the WM spec check window
X-GNOME-WMName=compiz
# back compat only
X-GnomeWMSettingsLibrary=compiz
Last edited by instantaphex (2013-05-04 20:59:44)So I started to think that maybe compiz was actually starting up but the ccp argument wasn't taking. I ran
$ pgrep -l compiz
and got no output. So compiz really isn't starting at all. What gives? -
Can't start gnome [SOLVED]
I now can't open these programmes, and probably more. I had updated pacman, and looked at packages I needed to update. I then force-upgraded firefox, but that was after shaman wouldn't open.
I reboot, and gnome won't start. It gives an error like the ones below.
[duncan@duncan-arch ~]$ gedit
gedit: error while loading shared libraries: libgnutls.so.13: cannot open shared object file: No such file or directory
[duncan@duncan-arch ~]$ mousepad
(mousepad:9021): Gtk-WARNING **: Failed to read filechooser settings from "/home/duncan/.config/gtk-2.0/gtkfilechooser.ini": Permission denied
(mousepad:9021): Gtk-WARNING **: Failed to read filechooser settings from "/home/duncan/.config/gtk-2.0/gtkfilechooser.ini": Permission denied
[duncan@duncan-arch ~]$ gedit /etc/pacman.conf
gedit: error while loading shared libraries: libgnutls.so.13: cannot open shared object file: No such file or directory
[duncan@duncan-arch ~]$ nautilus
nautilus: error while loading shared libraries: libgnutls.so.13: cannot open shared object file: No such file or directory
Last edited by Raccoon1400 (2008-09-03 02:58:36)Wow. libgnutls.so.13? The current version in the 64 bit repos is so.26. That's quite a so bump. I'm assuming that you did a full upgrade? If so, you may want to force update the pacman database with pacman -Syy and then do a full upgrade again.
-
When I login either from gdm or lxdm the screen sits blue for 1~2min then a message pops up like "Oh no! Something has gone wrong... Please logout and try again" and I can only logout and nothing else.
A couple of days ago I installed arch and started to learn how to use pacman and I managed to install gnome 3 with no trouble, everything running smooth. Then I met the AUR, and the bleeding edge stuff, then I installed packer and this brilliant idea came up: why gnome 3, I want unity! And I started installing things mentioned in the Ayatana wiki page, I always rebooted after installing a few packages to check if everything was going well, but after I install compiz-core-unity-git something went wrong, the problem is that I'm not really sure if it was that package, but things collapsed when I ran a compiz command which I can't remember. I tried uninstalling all the packages I could think of being related to the problem, didn't work. I even uninstalled the whole gnome, gdm and xorg, and installing everything again, didn't work either. Here is what everything.log is saying about the error:
Jun 9 18:10:18 eve -- MARK --
Jun 9 18:13:48 eve gnome-session[3342]: GLib-GObject-WARNING: Two different plugins tried to register 'GConfSettingsBackend'.
Jun 9 18:13:48 eve gnome-session[3342]: GLib-GIO-WARNING: Tried to register an extension of the type (null) to extension point gsettings-backend. Expected type is GObject.
Jun 9 18:13:49 eve kernel: [ 7425.076742] gnome-settings-[3364]: segfault at 10 ip 00007f9b837701d1 sp 00007fff8bb183e0 error 4 in libgioremote-volume-monitor.so[7f9b83762000+13000]
Jun 9 18:13:49 eve gnome-session[3342]: WARNING: Application 'gnome-settings-daemon.desktop' killed by signal
Jun 9 21:14:19 eve rtkit-daemon[978]: Successfully made thread 3420 of process 3420 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Jun 9 21:14:19 eve rtkit-daemon[978]: Supervising 2 threads of 2 processes of 1 users.
Jun 9 18:14:19 eve pulseaudio[3420]: pid.c: Daemon already running.
Jun 9 18:14:19 eve kernel: [ 7455.164654] nautilus[3400]: segfault at 10 ip 00007fa0e0a451d1 sp 00007fff998574e0 error 4 in libgioremote-volume-monitor.so[7fa0e0a37000+13000]
Jun 9 18:14:19 eve kernel: [ 7455.217708] gnome-shell[3394]: segfault at 10 ip 00007ff9979fa1d1 sp 00007ffffac01640 error 4 in libgioremote-volume-monitor.so[7ff9979ec000+13000]
Jun 9 18:14:19 eve gnome-session[3342]: WARNING: Application 'gnome-shell.desktop' killed by signal
Jun 9 18:14:20 eve kernel: [ 7455.583314] gnome-shell[3436]: segfault at 10 ip 00007fb48ddfa1d1 sp 00007fff289abf60 error 4 in libgioremote-volume-monitor.so[7fb48ddec000+13000]
Jun 9 18:14:20 eve gnome-session[3342]: WARNING: Application 'gnome-shell.desktop' killed by signal
Jun 9 18:14:20 eve gnome-session[3342]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: Two different plugins tried to register 'GDaemonVfs'.
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: Two different plugins tried to register 'GDaemonVolumeMonitor'.
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GIO-WARNING: Tried to register an extension of the type (null) to extension point gio-volume-monitor. Expected type is GVolumeMonitor.
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: cannot add interface type `GLoadableIcon' to type `GVfsIcon', since type `GVfsIcon' already conforms to interface
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GIO-WARNING: Tried to register an extension of the type (null) to extension point gio-vfs. Expected type is GVfs.
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: Two different plugins tried to register 'GVfsUriMapper'.
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: Two different plugins tried to register 'GVfsUriMapperSmb'.
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: Two different plugins tried to register 'GVfsUriMapperHttp'.
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
Jun 9 18:14:20 eve gnome-session[3342]: GLib-GObject-WARNING: invalid cast from `GDaemonVfs' to `<invalid>'
I have hope that somebody has had this issue and that it has a trivial solution which just happend to skip my thoughts.
Seriously I'm considering reinstalling arch from scratch.Sounds very familiar... I got all excited about aur and all the bleeding edge software out there for arch when I first switched and ended up messing my system up in much the same way.
Anyways, for starters you can post the output of
pacman -Qm
here to see if anyone spots something bogus that you've installed from aur.
I'm sure there are those that would disagree with me, but if I were you I would just save the output of
pacman -Q
and reinstall your system from scratch... Also, I don't know if you're using yaourt, but I would advise against it in the beginning since it makes it so easy to install unsupported software... I think it's better to download the package and makepkg it by hand because it makes you think more about what you're doing (at most use something like cower). That's just my opinion though... -
[Solved] Can't Start Pulse Audio and No Sound/Volume Controls
Ok, I booted my PC this morning to find I have no sound controls in Gnome Shell after an update yesterday or sound, I have to use alsamixer to unmute, so I am getting sound but no way to control it. I tried killing pulseaudio and restarting but I keep getting the same error:
pulseaudio -k:
E: [pulseaudio] main.c: Failed to kill daemon: No such process
pulseaudio --start:
E: [pulseaudio] main.c: Daemon startup failed.
start-pulseaudio-x11:
Connection failure: Connection refused
pa_context_connect() failed: Connection refused
This is the output of pulseaudio -v:
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 6.0
I: [pulseaudio] main.c: Page size is 4096 bytes
I: [pulseaudio] main.c: Machine ID is 74ef4413bd254c10a2eee6b69deab3c7.
I: [pulseaudio] main.c: Session ID is c2.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/dobbie/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-stream-volumes'.
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/dobbie/.config/pulse/74ef4413bd254c10a2eee6b69deab3c7-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/HD-Audio Generic/HD-Audio Generic.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HD-Audio Generic use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HD-Audio Generic
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D1p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hdmi:1: Invalid argument
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,5
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,5: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D12p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D13p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_01_00.1.
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] alsa-util.c: Trying to disable ALSA period wakeups, using timers only
I: [pulseaudio] alsa-util.c: ALSA period wakeups disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device hdmi:1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Digital Stereo (HDMI)' (hdmi-stereo).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: alsa.resolution_bits = "16"
I: [pulseaudio] sink.c: device.api = "alsa"
I: [pulseaudio] sink.c: device.class = "sound"
I: [pulseaudio] sink.c: alsa.class = "generic"
I: [pulseaudio] sink.c: alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c: alsa.name = "HDMI 0"
I: [pulseaudio] sink.c: alsa.id = "HDMI 0"
I: [pulseaudio] sink.c: alsa.subdevice = "0"
I: [pulseaudio] sink.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c: alsa.device = "3"
I: [pulseaudio] sink.c: alsa.card = "1"
I: [pulseaudio] sink.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] sink.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] sink.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] sink.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] sink.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] sink.c: device.bus = "pci"
I: [pulseaudio] sink.c: device.vendor.id = "1002"
I: [pulseaudio] sink.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] sink.c: device.product.id = "aac0"
I: [pulseaudio] sink.c: device.string = "hdmi:1"
I: [pulseaudio] sink.c: device.buffering.buffer_size = "352768"
I: [pulseaudio] sink.c: device.buffering.fragment_size = "176384"
I: [pulseaudio] sink.c: device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c: device.profile.name = "hdmi-stereo"
I: [pulseaudio] sink.c: device.profile.description = "Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: device.description = "HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] sink.c: alsa.mixer_name = "ATI R6xx HDMI"
I: [pulseaudio] sink.c: alsa.components = "HDA:1002aa01,00aa0100,00100500"
I: [pulseaudio] sink.c: module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of HD-Audio Generic Digital Stereo (HDMI)"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "HD-Audio Generic"
I: [pulseaudio] source.c: alsa.long_card_name = "HD-Audio Generic at 0xfbf9c000 irq 28"
I: [pulseaudio] source.c: alsa.driver_name = "snd_hda_intel"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:01:00.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1"
I: [pulseaudio] source.c: device.bus = "pci"
I: [pulseaudio] source.c: device.vendor.id = "1002"
I: [pulseaudio] source.c: device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
I: [pulseaudio] source.c: device.product.id = "aac0"
I: [pulseaudio] source.c: device.string = "1"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 2.0 fragments of size 176384 bytes (999.91ms), buffer size is 352768 bytes (1999.82ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 20.00ms
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
I: [alsa-sink-HDMI 0] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-sink-HDMI 0] alsa-sink.c: Starting playback.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="1" name="pci-0000_01_00.1" card_name="alsa_card.pci-0000_01_00.1" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1 (alsa_card.pci-0000_01_00.1) module loaded.
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm/USB Camera-B4.09.24.1/USB Camera-B4.09.24.1.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card USB Camera-B4.09.24.1
I: [pulseaudio] (alsa-lib)main.c: error: failed to import USB Camera-B4.09.24.1 use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card USB Camera-B4.09.24.1
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:2
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.1:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,1: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.2:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,2: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.3:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,3: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.4:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,4: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.5:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,5: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.6:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,6: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.7:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:2,7: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:2,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:2,7: No such file or directory
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:2: No such file or directory
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.
I: [pulseaudio] card.c: Created 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] alsa-util.c: Disabling tsched mode since BATCH flag is set
I: [pulseaudio] alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 16000 Hz.
I: [pulseaudio] alsa-source.c: Successfully opened device hw:2.
I: [pulseaudio] alsa-source.c: Selected mapping 'Multichannel' (multichannel).
I: [pulseaudio] alsa-source.c: Cannot enable timer-based scheduling, falling back to sound IRQ scheduling.
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
I: [pulseaudio] alsa-source.c: Failed to find a working mixer device.
I: [pulseaudio] source.c: Created source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel" with sample spec s16le 4ch 16000Hz and channel map front-left,front-right,rear-left,rear-right
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "2"
I: [pulseaudio] source.c: alsa.card_name = "USB Camera-B4.09.24.1"
I: [pulseaudio] source.c: alsa.long_card_name = "OmniVision Technologies, Inc. USB Camera-B4.09.24.1 at usb-0000:00:1d.0-1.2, hi"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.0-usb-0:1.2:1.1"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2"
I: [pulseaudio] source.c: udev.id = "usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "1415"
I: [pulseaudio] source.c: device.vendor.name = "Nam Tai E&E Products Ltd. or OmniVision Technologies, Inc."
I: [pulseaudio] source.c: device.product.id = "2000"
I: [pulseaudio] source.c: device.product.name = "Sony Playstation Eye"
I: [pulseaudio] source.c: device.serial = "OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1"
I: [pulseaudio] source.c: device.string = "hw:2"
I: [pulseaudio] source.c: device.buffering.buffer_size = "12792"
I: [pulseaudio] source.c: device.buffering.fragment_size = "3192"
I: [pulseaudio] source.c: device.access_mode = "mmap"
I: [pulseaudio] source.c: device.profile.name = "multichannel"
I: [pulseaudio] source.c: device.profile.description = "Multichannel"
I: [pulseaudio] source.c: device.description = "Sony Playstation Eye Multichannel"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "audio-card-usb"
I: [pulseaudio] alsa-source.c: Using 4.0 fragments of size 3192 bytes (24.94ms), buffer size is 12792 bytes (99.94ms)
I: [alsa-source-USB Audio] core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-USB Audio] alsa-source.c: Starting capture.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="2" name="usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" card_name="alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/sound/card2 (alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 3 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #8; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #12; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #14; argument: "").
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #15; argument: "").
I: [pulseaudio] client.c: Created 0 "Login Session c2"
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #16; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #17; argument: "").
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #18; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #19; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #20; argument: "").
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon.
I: [pulseaudio] module.c: Unloading "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloaded "module-filter-apply" (index: #20).
I: [pulseaudio] module.c: Unloading "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloaded "module-filter-heuristics" (index: #19).
I: [pulseaudio] module.c: Unloading "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloaded "module-role-cork" (index: #18).
I: [pulseaudio] module.c: Unloading "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloaded "module-position-event-sounds" (index: #17).
I: [pulseaudio] module.c: Unloading "module-systemd-login" (index: #16).
I: [pulseaudio] client.c: Freed 0 "Login Session c2"
I: [pulseaudio] module.c: Unloaded "module-systemd-login" (index: #16).
I: [pulseaudio] module.c: Unloading "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloaded "module-console-kit" (index: #15).
I: [pulseaudio] module.c: Unloading "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloaded "module-suspend-on-idle" (index: #14).
I: [pulseaudio] module.c: Unloading "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloaded "module-intended-roles" (index: #13).
I: [pulseaudio] module.c: Unloading "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloaded "module-always-sink" (index: #12).
I: [pulseaudio] module.c: Unloading "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloaded "module-rescue-streams" (index: #11).
I: [pulseaudio] module.c: Unloading "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloaded "module-default-device-restore" (index: #10).
I: [pulseaudio] module.c: Unloading "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloaded "module-native-protocol-unix" (index: #9).
I: [pulseaudio] module.c: Unloading "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloaded "module-esound-protocol-unix" (index: #8).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #7).
I: [pulseaudio] source.c: Freeing source 1 "alsa_input.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241.multichannel"
I: [pulseaudio] card.c: Freed 1 "alsa_card.usb-OmniVision_Technologies__Inc._USB_Camera-B4.09.24.1-01-CameraB409241"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #7).
I: [pulseaudio] module.c: Unloading "module-alsa-card" (index: #6).
I: [pulseaudio] sink.c: Freeing sink 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo"
I: [pulseaudio] source.c: Freeing source 0 "alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor"
I: [pulseaudio] card.c: Freed 0 "alsa_card.pci-0000_01_00.1"
I: [pulseaudio] module.c: Unloaded "module-alsa-card" (index: #6).
I: [pulseaudio] module.c: Unloading "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloaded "module-udev-detect" (index: #5).
I: [pulseaudio] module.c: Unloading "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloaded "module-switch-on-port-available" (index: #4).
I: [pulseaudio] module.c: Unloading "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloaded "module-augment-properties" (index: #3).
I: [pulseaudio] module.c: Unloading "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloaded "module-card-restore" (index: #2).
I: [pulseaudio] module.c: Unloading "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloaded "module-stream-restore" (index: #1).
I: [pulseaudio] module.c: Unloading "module-device-restore" (index: #0).
I: [pulseaudio] module.c: Unloaded "module-device-restore" (index: #0).
I: [pulseaudio] main.c: Daemon terminated.
When I start pavucontrol I get this:
Can someone help me correct what the issue is, please let me know if you need more information.
Thanks in advance.
Last edited by Dobbie03 (2015-05-15 20:35:02)I tried "pulseaudio" in the terminal and get the following:
W: [pulseaudio] alsa-util.c: Unable to load mixer: Invalid argument
E: [pulseaudio] ltdl-bind-now.c: Failed to open module module-equalizer-sink.so: module-equalizer-sink.so: cannot open shared object file: No such file or directory
E: [pulseaudio] module.c: Failed to open module "module-equalizer-sink".
E: [pulseaudio] main.c: Module load failed.
E: [pulseaudio] main.c: Failed to initialize daemon. -
[SOLVED]Can't start mpd
I tried today to setup mpd, so I could connect ncmcpp to it, but it seems that it fails everytime I try to "systemctl start mpd".
My config for mpd (/etc/mpd.conf)
# Files and directories #######################################################
music_directory "/root/Desktop/music/"
playlist_directory "/root/Desktop/music/"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/lib/mpd/mpd.log"
pid_file "/run/mpd/mpd.pid"
state_file "/var/lib/mpd/mpd.state"
sticker_file "/var/lib/mpd/mpd.stickers"
# General music daemon options ################################################
user "lain"
bind_to_address "any"
port "6600"
#log_level "default"
#uncomment here and set restore_pause parameter to yes if you want MPD does not start automatically the latest playlist at startup
#restore_paused "no"
metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
auto_update "yes"
gapless_mp3_playback "yes"
# Zeroconf / Avahi Service Discovery ##########################################
zeroconf_enabled "yes"
zeroconf_name "Music Player Deamon"
# Input #######################################################################
input {
plugin "curl"
# Audio Output ################################################################
#Cubox Optical output
audio_output {
type "alsa"
name "SPDIF optique"
device "hw:0,0"
#Any USB dac if you plugged one
audio_output {
type "alsa"
name "Your USB DAC"
device "hw:1,0"
#Uncomment if you allow MPD to manage volume by software
#mixer_type "software"
# MPD Internal Buffering ######################################################
#Increase values if you heard some clicks and pops
audio_buffer_size "2048"
buffer_before_play "10%"
# Character Encoding ##########################################################
filesystem_charset "UTF-8"
id3v1_encoding "UTF-8"
# Plugins ##########################################################
#uncomment to enable LastFM feature - doc : http://mpd.wikia.com/wiki/Last.fm_Radio
#playlist_plugin {
# name "lastfm"
# user "my_username"
# password "my_password"
My mpd.socket.
[Unit]
Description=Music Player Daemon Sockets
[Socket]
ListenStream=/var/run/mpd/socket
ListenStream=6600
[Install]
WantedBy=sockets.target
The error I get when typing systemctl start mpd:
* mpd.service - Music Player Daemon Sockets
Loaded: error (Reason: Invalid argument)
Active: inactive (dead)
Jul 11 14:22:09 Host-001.homenet.telecomitalia.it systemd[1]: [/usr/lib/systemd/system/mpd.service:1] .include not allowed here. Ignoring.
Jul 11 14:22:09 Host-001.homenet.telecomitalia.it systemd[1]: mpd.service lacks ExecStart setting. Refusing.
Jul 11 14:31:30 Host-001.homenet.telecomitalia.it systemd[1]: [/usr/lib/systemd/system/mpd.service:4] Unknown section 'Socket'. Ignoring.
Jul 11 14:31:30 Host-001.homenet.telecomitalia.it systemd[1]: mpd.service lacks ExecStart setting. Refusing.
Jul 11 14:32:04 Host-001.homenet.telecomitalia.it systemd[1]: [/usr/lib/systemd/system/mpd.service:4] Unknown section 'Socket'. Ignoring.
Jul 11 14:32:04 Host-001.homenet.telecomitalia.it systemd[1]: mpd.service lacks ExecStart setting. Refusing.
Jul 11 15:10:01 Host-001.homenet.telecomitalia.it systemd[1]: [/usr/lib/systemd/system/mpd.service:4] Unknown section 'Socket'. Ignoring.
Jul 11 15:10:01 Host-001.homenet.telecomitalia.it systemd[1]: mpd.service lacks ExecStart setting. Refusing.
Jul 11 15:10:26 Host-001.homenet.telecomitalia.it systemd[1]: [/usr/lib/systemd/system/mpd.service:4] Unknown section 'Socket'. Ignoring.
Jul 11 15:10:26 Host-001.homenet.telecomitalia.it systemd[1]: mpd.service lacks ExecStart setting. Refusing.
I can see that mpd.service is my problem (I accidently put the same in it as in mpd.service), but I searched everywhere but I just don't understand what I have to enter in it.
Last edited by Mugi (2014-07-11 22:44:39)HiImTye wrote:
ps -ef
netstat -an
would be useful as well
ps -ef:
UID PID PPID C STIME TTY TIME CMD
root 1 0 0 22:12 ? 00:00:01 /sbin/init
root 2 0 0 22:12 ? 00:00:00 [kthreadd]
root 3 2 0 22:12 ? 00:00:00 [ksoftirqd/0]
root 5 2 0 22:12 ? 00:00:00 [kworker/0:0H]
root 7 2 0 22:12 ? 00:00:01 [rcu_preempt]
root 8 2 0 22:12 ? 00:00:00 [rcu_sched]
root 9 2 0 22:12 ? 00:00:00 [rcu_bh]
root 10 2 0 22:12 ? 00:00:00 [migration/0]
root 11 2 0 22:12 ? 00:00:00 [watchdog/0]
root 12 2 0 22:12 ? 00:00:00 [watchdog/1]
root 13 2 0 22:12 ? 00:00:00 [migration/1]
root 14 2 0 22:12 ? 00:00:00 [ksoftirqd/1]
root 16 2 0 22:12 ? 00:00:00 [kworker/1:0H]
root 17 2 0 22:12 ? 00:00:00 [khelper]
root 18 2 0 22:12 ? 00:00:00 [kdevtmpfs]
root 19 2 0 22:12 ? 00:00:00 [netns]
root 20 2 0 22:12 ? 00:00:00 [khungtaskd]
root 21 2 0 22:12 ? 00:00:00 [writeback]
root 22 2 0 22:12 ? 00:00:00 [ksmd]
root 23 2 0 22:12 ? 00:00:01 [khugepaged]
root 24 2 0 22:12 ? 00:00:00 [kintegrityd]
root 25 2 0 22:12 ? 00:00:00 [bioset]
root 26 2 0 22:12 ? 00:00:00 [crypto]
root 27 2 0 22:12 ? 00:00:00 [kblockd]
root 28 2 0 22:12 ? 00:00:00 [kworker/1:1]
root 29 2 0 22:12 ? 00:00:00 [kswapd0]
root 30 2 0 22:12 ? 00:00:00 [fsnotify_mark]
root 34 2 0 22:12 ? 00:00:00 [kthrotld]
root 35 2 0 22:12 ? 00:00:00 [ipv6_addrconf]
root 36 2 0 22:12 ? 00:00:00 [deferwq]
root 63 2 0 22:12 ? 00:00:00 [khubd]
root 64 2 0 22:12 ? 00:00:00 [ata_sff]
root 65 2 0 22:12 ? 00:00:00 [scsi_eh_0]
root 66 2 0 22:12 ? 00:00:00 [scsi_tmf_0]
root 67 2 0 22:12 ? 00:00:00 [scsi_eh_1]
root 68 2 0 22:12 ? 00:00:00 [scsi_tmf_1]
root 71 2 0 22:12 ? 00:00:00 [scsi_eh_2]
root 72 2 0 22:12 ? 00:00:00 [scsi_tmf_2]
root 73 2 0 22:12 ? 00:00:00 [scsi_eh_3]
root 74 2 0 22:12 ? 00:00:00 [scsi_tmf_3]
root 75 2 0 22:12 ? 00:00:00 [scsi_eh_4]
root 76 2 0 22:12 ? 00:00:00 [scsi_tmf_4]
root 77 2 0 22:12 ? 00:00:00 [scsi_eh_5]
root 78 2 0 22:12 ? 00:00:00 [scsi_tmf_5]
root 79 2 0 22:12 ? 00:00:00 [scsi_eh_6]
root 80 2 0 22:12 ? 00:00:00 [scsi_tmf_6]
root 81 2 0 22:12 ? 00:00:00 [scsi_eh_7]
root 82 2 0 22:12 ? 00:00:00 [scsi_tmf_7]
root 95 2 0 22:12 ? 00:00:03 [kworker/1:2]
root 98 2 0 22:12 ? 00:00:00 [kworker/1:1H]
root 99 2 0 22:12 ? 00:00:00 [kworker/0:1H]
root 107 2 0 22:12 ? 00:00:00 [jbd2/sda1-8]
root 108 2 0 22:12 ? 00:00:00 [ext4-rsv-conver]
root 143 1 0 22:12 ? 00:00:00 /usr/lib/systemd/systemd-journald
root 154 1 0 22:12 ? 00:00:00 /usr/lib/systemd/systemd-udevd
root 169 2 0 22:12 ? 00:00:00 [acpi_thermal_pm]
root 172 2 0 22:12 ? 00:00:00 [edac-poller]
root 175 2 0 22:12 ? 00:00:00 [kpsmoused]
root 176 2 0 22:12 ? 00:00:00 [cfg80211]
root 181 2 0 22:12 ? 00:00:00 [ttm_swap]
root 194 2 0 22:12 ? 00:00:00 [kvm-irqfd-clean]
root 208 2 0 22:12 ? 00:00:00 [jbd2/sda2-8]
root 209 2 0 22:12 ? 00:00:00 [ext4-rsv-conver]
dbus 219 1 0 22:12 ? 00:00:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation
root 222 1 0 22:12 ? 00:00:00 /usr/lib/systemd/systemd-logind
root 230 1 0 22:12 ? 00:00:00 login -- root
root 231 1 0 22:12 ? 00:00:00 /usr/bin/kdm -nodaemon
root 233 231 0 22:12 tty7 00:00:00 /usr/bin/X :0 vt7 -nolisten tcp -auth /var/run/xauth/A:0-Xupqdb
root 239 231 0 22:12 ? 00:00:00 -:0
kdm 240 239 0 22:12 ? 00:00:02 /usr/lib/kde4/libexec/kdm_greet
root 251 1 0 22:13 ? 00:00:00 /usr/lib/systemd/systemd --user
root 253 251 0 22:13 ? 00:00:00 (sd-pam)
root 255 230 0 22:13 tty1 00:00:00 -bash
root 337 1 0 22:13 ? 00:00:00 wpa_supplicant -B -P /run/wpa_supplicant_wlp8s0.pid -i wlp8s0 -D nl80211,wext -c/run/network/wpa_supplicant_wlp8s0.conf
root 500 1 0 22:13 ? 00:00:00 dhcpcd -4 -q -t 30 -L wlp8s0
root 503 255 0 22:13 tty1 00:00:00 /bin/sh /usr/bin/startx
root 520 503 0 22:13 tty1 00:00:00 xinit /root/.xinitrc -- /etc/X11/xinit/xserverrc :1 -auth /tmp/serverauth.AO0gpiN7dM
root 521 520 2 22:13 ? 00:01:16 /usr/bin/X -nolisten tcp :1 -auth /tmp/serverauth.AO0gpiN7dM vt1
root 525 520 0 22:13 tty1 00:00:05 awesome
root 530 1 0 22:13 tty1 00:00:00 /usr/bin/dbus-launch --autolaunch 947893976d9f4146aced9d933faba20c --binary-syntax --close-stderr
root 531 1 0 22:13 ? 00:00:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
root 541 1 0 22:13 ? 00:00:00 urxvt
root 542 541 0 22:13 pts/0 00:00:00 -bash
root 551 1 7 22:14 ? 00:04:26 /usr/lib/firefox/firefox
root 557 1 0 22:14 ? 00:00:00 /usr/lib/GConf/gconfd-2
root 650 2 0 22:23 ? 00:00:02 [kworker/0:2]
root 682 2 0 22:55 ? 00:00:00 [kworker/u8:25]
root 722 2 0 22:55 ? 00:00:00 [kworker/u8:65]
root 904 1 0 22:59 ? 00:00:00 urxvt
root 905 904 0 22:59 pts/1 00:00:00 -bash
root 910 1 0 22:59 ? 00:00:00 urxvt
root 911 910 0 22:59 pts/2 00:00:00 -bash
root 916 1 0 22:59 ? 00:00:00 urxvt
root 917 916 0 22:59 pts/3 00:00:00 -bash
root 922 1 0 22:59 ? 00:00:00 urxvt
root 923 922 0 22:59 pts/4 00:00:00 -bash
root 927 905 0 22:59 pts/1 00:00:00 su lain
lain 928 927 0 22:59 pts/1 00:00:00 bash
lain 929 928 0 22:59 pts/1 00:00:00 weechat
root 948 2 0 23:06 ? 00:00:00 [kworker/0:0]
root 959 2 0 23:11 ? 00:00:00 [kworker/0:1]
root 969 1 0 23:14 ? 00:00:00 /usr/lib/at-spi2-core/at-spi-bus-launcher
root 973 969 0 23:14 ? 00:00:00 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --nofork --print-address 3
root 976 1 0 23:14 ? 00:00:00 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
root 987 2 0 23:16 ? 00:00:00 [kworker/u8:0]
netstat -an:
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 192.168.1.105:37496 91.217.189.42:6667 ESTABLISHED
udp 0 0 0.0.0.0:68 0.0.0.0:*
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 10763 /var/run/xdmctl/dmctl-:0/socket
unix 2 [ ] DGRAM 11794 /run/user/0/systemd/notify
unix 2 [ ACC ] STREAM LISTENING 11796 /run/user/0/systemd/private
unix 2 [ ACC ] STREAM LISTENING 11645 @/tmp/.X11-unix/X0
unix 2 [ ACC ] STREAM LISTENING 12359 @/tmp/.X11-unix/X1
unix 2 [ ACC ] STREAM LISTENING 12360 /tmp/.X11-unix/X1
unix 2 [ ] DGRAM 7031 /run/systemd/notify
unix 2 [ ACC ] STREAM LISTENING 7033 /run/systemd/private
unix 2 [ ACC ] STREAM LISTENING 10620 /run/dbus/system_bus_socket
unix 2 [ ACC ] STREAM LISTENING 11646 /tmp/.X11-unix/X0
unix 2 [ ] DGRAM 11916 /run/wpa_supplicant/wlp8s0
unix 2 [ ] DGRAM 7054 /run/systemd/shutdownd
unix 6 [ ] DGRAM 7056 /run/systemd/journal/dev-log
unix 2 [ ACC ] STREAM LISTENING 190509 @/tmp/dbus-OIWjnV7E3y
unix 2 [ ACC ] STREAM LISTENING 7060 /run/lvm/lvmetad.socket
unix 2 [ ACC ] SEQPACKET LISTENING 7063 /run/udev/control
unix 2 [ ACC ] STREAM LISTENING 7066 /run/systemd/journal/stdout
unix 6 [ ] DGRAM 7068 /run/systemd/journal/socket
unix 2 [ ACC ] STREAM LISTENING 12383 @/tmp/dbus-vOywFZMoCE
unix 2 [ ACC ] STREAM LISTENING 10739 /var/run/xdmctl/dmctl/socket
unix 3 [ ] STREAM CONNECTED 12927 @/tmp/dbus-vOywFZMoCE
unix 3 [ ] STREAM CONNECTED 108627 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 10765
unix 3 [ ] STREAM CONNECTED 11535
unix 3 [ ] STREAM CONNECTED 12907 @/tmp/.X11-unix/X1
unix 3 [ ] DGRAM 7777
unix 3 [ ] STREAM CONNECTED 12936
unix 3 [ ] STREAM CONNECTED 12787 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 13392
unix 3 [ ] STREAM CONNECTED 11688
unix 3 [ ] STREAM CONNECTED 12384
unix 3 [ ] STREAM CONNECTED 10767
unix 3 [ ] STREAM CONNECTED 10774
unix 3 [ ] STREAM CONNECTED 10627
unix 3 [ ] STREAM CONNECTED 11782
unix 3 [ ] STREAM CONNECTED 13395 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 10775
unix 3 [ ] STREAM CONNECTED 13372
unix 3 [ ] STREAM CONNECTED 13444 @/tmp/dbus-vOywFZMoCE
unix 3 [ ] STREAM CONNECTED 190499 /run/systemd/journal/stdout
unix 2 [ ] DGRAM 11256
unix 3 [ ] STREAM CONNECTED 189949 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 12950
unix 3 [ ] STREAM CONNECTED 108596
unix 3 [ ] STREAM CONNECTED 10748 /run/systemd/journal/stdout
unix 3 [ ] STREAM CONNECTED 12032 @/tmp/dbus-vOywFZMoCE
unix 3 [ ] STREAM CONNECTED 190498 /run/systemd/journal/stdout
unix 3 [ ] STREAM CONNECTED 12019
unix 3 [ ] STREAM CONNECTED 189892 @/tmp/dbus-vOywFZMoCE
unix 3 [ ] STREAM CONNECTED 190533
unix 3 [ ] STREAM CONNECTED 12025
unix 3 [ ] STREAM CONNECTED 189948
unix 3 [ ] STREAM CONNECTED 190510
unix 3 [ ] STREAM CONNECTED 190511
unix 3 [ ] STREAM CONNECTED 189939 @/tmp/dbus-OIWjnV7E3y
unix 3 [ ] STREAM CONNECTED 11404
unix 3 [ ] STREAM CONNECTED 12020 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 189915
unix 3 [ ] STREAM CONNECTED 11403
unix 3 [ ] STREAM CONNECTED 11379
unix 3 [ ] STREAM CONNECTED 189916
unix 3 [ ] STREAM CONNECTED 10768
unix 2 [ ] DGRAM 7773
unix 3 [ ] STREAM CONNECTED 13402 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 107420
unix 2 [ ] DGRAM 11529
unix 3 [ ] STREAM CONNECTED 10779 @/tmp/.X11-unix/X0
unix 2 [ ] DGRAM 12942
unix 3 [ ] STREAM CONNECTED 13386
unix 3 [ ] STREAM CONNECTED 10766
unix 3 [ ] STREAM CONNECTED 10769 @/tmp/.X11-unix/X0
unix 3 [ ] STREAM CONNECTED 12934
unix 3 [ ] STREAM CONNECTED 190504
unix 3 [ ] DGRAM 7776
unix 3 [ ] STREAM CONNECTED 12933 @/tmp/dbus-vOywFZMoCE
unix 3 [ ] STREAM CONNECTED 12941
unix 3 [ ] STREAM CONNECTED 11783 /run/systemd/journal/stdout
unix 3 [ ] STREAM CONNECTED 10706 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 12937
unix 3 [ ] STREAM CONNECTED 107351
unix 3 [ ] STREAM CONNECTED 12385
unix 3 [ ] STREAM CONNECTED 11694
unix 3 [ ] STREAM CONNECTED 12387 @/tmp/.X11-unix/X1
unix 2 [ ] DGRAM 10860
unix 3 [ ] STREAM CONNECTED 11405 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 108566 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 12283
unix 2 [ ] DGRAM 11789
unix 3 [ ] STREAM CONNECTED 12386
unix 3 [ ] STREAM CONNECTED 12033
unix 3 [ ] STREAM CONNECTED 12016 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 12390 /run/dbus/system_bus_socket
unix 3 [ ] STREAM CONNECTED 12364
unix 3 [ ] STREAM CONNECTED 189888
unix 3 [ ] STREAM CONNECTED 107395 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 189889
unix 3 [ ] STREAM CONNECTED 189918 /run/systemd/journal/stdout
unix 3 [ ] STREAM CONNECTED 190535 @/tmp/dbus-vOywFZMoCE
unix 2 [ ] DGRAM 7123
unix 3 [ ] STREAM CONNECTED 10747 /run/systemd/journal/stdout
unix 3 [ ] STREAM CONNECTED 189938
unix 3 [ ] STREAM CONNECTED 11445
unix 2 [ ] DGRAM 108886
unix 3 [ ] STREAM CONNECTED 107451 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 189917 /run/systemd/journal/stdout
unix 3 [ ] STREAM CONNECTED 12031
unix 3 [ ] STREAM CONNECTED 12377 @/tmp/.X11-unix/X1
unix 3 [ ] STREAM CONNECTED 108657 -
[SOLVED] Can't start NFS server
I've read the wiki page and I've been changing my config files accordingly. When I try to start it I get the following error (from journalctl):
Nov 02 21:41:47 arch sudo[11201]: dennis : TTY=pts/0 ; PWD=/home/dennis ; USER=root ; COMMAND=/usr/bin/systemctl start nfsd.
service rpc-idmapd.service rpc-mountd.service rpcbind.service
Nov 02 21:41:47 arch sudo[11201]: pam_unix(sudo:session): session opened for user root by dennis(uid=0)
Nov 02 21:41:47 arch systemd[1]: Starting NFS server...
Nov 02 21:41:47 arch systemd[1]: Mounting RPC pipe filesystem...
[b]Nov 02 21:41:47 arch rpc.nfsd[11204]: rpc.nfsd: Unable to access /proc/fs/nfsd errno 2 (No such file or directory).
Nov 02 21:41:47 arch rpc.nfsd[11204]: Please try, as root, 'mount -t nfsd nfsd /proc/fs/nfsd' and then restart rpc.nfsd to correct the problem[/b]
Nov 02 21:41:47 arch rpc.nfsd[11204]: error starting threads: errno 38 (Function not implemented)
Nov 02 21:41:47 arch systemd[1]: Started RPC Bind.
Nov 02 21:41:47 arch systemd[1]: nfsd.service: main process exited, code=exited, status=1/FAILURE
Nov 02 21:41:47 arch mount[11205]: mount: unknown filesystem type 'rpc_pipefs'
Nov 02 21:41:47 arch systemd[1]: Failed to start NFS server.
Nov 02 21:41:47 arch systemd[1]: Dependency failed for NFS Mount Daemon.
Nov 02 21:41:47 arch systemd[1]: Job rpc-mountd.service/start failed with result 'dependency'.
Nov 02 21:41:47 arch systemd[1]: Unit nfsd.service entered failed state
Nov 02 21:41:47 arch systemd[1]: var-lib-nfs-rpc_pipefs.mount mount process exited, code=exited status=32
Nov 02 21:41:47 arch systemd[1]: Failed to mount RPC pipe filesystem.
Nov 02 21:41:47 arch systemd[1]: Dependency failed for NFSv4 ID-name mapping daemon.
Nov 02 21:41:47 arch systemd[1]: Job rpc-idmapd.service/start failed with result 'dependency'.
Nov 02 21:41:47 arch systemd[1]: Unit var-lib-nfs-rpc_pipefs.mount entered failed state
Nov 02 21:41:47 arch sudo[11201]: pam_unix(sudo:session): session closed for user root
When I run mount -t nfsd nfsd /proc/fs/nfsd it says:
[dennis@arch ~]$ sudo mount -t nfsd nfsd /proc/fs/nfsd
mount: unknown filesystem type 'nfsd'
What to do? I've no idea how to solve this.
edit : changed quote tags to code --Inxsible
Last edited by snufkin (2012-11-03 07:50:52)alphaniner wrote:What happens if you just run systemctl start nfsd.service ?
Then I got another error message.
I found out what was wrong though. I had suspended the computer, which caused GNOME or whatever to mess with my session data. A reboot fixed the problem, although I'm sure a relog would've done the same.
Last edited by snufkin (2012-11-03 07:51:13) -
[SOLVED] Can't load gnome-music
Hi!
I've installed Arch Linux with GNOME 3 and if I run gnome-music it doesn't start.
Here's the terminal's output:
[albi@albi-desktop ~]$ gnome-music
Traceback (most recent call last):
File "/usr/bin/gnome-music", line 38, in <module>
from gnomemusic.application import Application
File "/usr/lib/python3.4/site-packages/gnomemusic/application.py", line 36, in <module>
from gnomemusic.window import Window
File "/usr/lib/python3.4/site-packages/gnomemusic/window.py", line 38, in <module>
from gnomemusic.query import Query
File "/usr/lib/python3.4/site-packages/gnomemusic/query.py", line 32, in <module>
class Query():
File "/usr/lib/python3.4/site-packages/gnomemusic/query.py", line 35, in Query
GLib.get_user_special_dir(GLib.UserDirectory.DIRECTORY_MUSIC)
TypeError: Argument 0 does not allow None as a value
And here's the version of gnome-session and gnome-music packages.
[albi@albi-desktop ~]$ pacman -Q gnome-session gnome-music
gnome-session 3.12.1-1
gnome-music 3.12.2.1-1
Please let me know if you need other inputs and I'll thank you in advantage for tips to make gnome-music works.
Last edited by AVDuma (2014-08-20 11:23:29)the lua warning you had was about grilo-pllugins, which optionally depends on lua for some plugins, and it probably wasn't anything critical.
I don't think the tracker message is any kind of critical error either. Looks like it just reports that it was able to connect with tracker service, and everything should be ok.
It's hard to guess why it can't find your mp3 files though, as there's no error messages or anything, but I have few ideas:
- it could be that your missing whatever library gnome-music uses for decoding mp3 files. I looked at the dependecy tree but couldn't figure out what that library could be, but since pretty much all gnome media applications are using gstreamer for that purpose, you could be just missing some gst-plugins. Also you could try if gnome-music can load any .wav .ogg or .flac files for example from your music dir.
- I'm not sure you're allowed to set XDG_MUSIC_DIR outside of your /home. Try creating music directory in your home, copy a few files in it, and change the directory in user-dirs.dirs accordingly.
I think gnome-music 3.12 isn't considered 100% production ready yet, as it is still in early development stages and there could still be some issues and missing features. For now rhythmbox is still the 'default' audio player for gnome.
about the bug reporting. If the bug is something arch linux specific, like missing dependencies, you should report it to arch bug tracker.
if it's a bug in the application itself, like the issue in your first post, it would make more sense to report it directly to gnome bugzilla. Although in that case it might be good idea to test the latest development snapshot (i.e. gnome-music-git from AUR) to check that the bug hasn't been fixed already.
also, please use LC_ALL=C when posting application output to get error messages in english, and use thumbnails when posting images: https://wiki.archlinux.org/index.php/Fo … s_and_Code -
How can i start a new user profile service in ordre to replace an old one ?
hi
i create a new user profile service in ordre to replace an old one
when i use : Get-SPServiceApplication i can see that hi is created but
when i use Get-SPServiceInstance i can see it i can see only the old oneHi,
The Get-SPServiceInstance returns the services instance for a specific server or the entire farm. The service instance GUID is unique to every farm and cannot be changed.
For starting a fresh with the User Profile Service configuration, you can unprovision and re-provision the User Profile Service:
http://sharepoint.stackexchange.com/questions/16146/deleted-service-application-service-instances-remain
http://www.harbar.net/articles/sp2010ups2.aspx#ups14
Best Regards,
Eric
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
[Solved] Can't get gnome network manager running
Alright this one is a head scratcher. I've folowed the wiki for network manager to a T except I can't get the network manager icon to show up (I have notification addon already running). I don't have any network loss though.
Here's my rc.conf
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# HARDWARECLOCK: set to "UTC" or "localtime"
# USEDIRECTISA: use direct I/O requests instead of /dev/rtc for hwclock
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.utf8"
HARDWARECLOCK="localtime"
USEDIRECTISA="no"
TIMEZONE="Canada/Pacific"
KEYMAP="dvorak/dvorak"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MOD_BLACKLIST: Prevent udev from loading these modules
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
# NOTE: Use of 'MOD_BLACKLIST' is deprecated. Please use ! in the MODULES array.
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(powernow-k8 cpufreq_ondemand cpufreq_powersave forcedeth snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore)
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="myhost"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(lo !eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
DAEMONS=(syslog-ng !network netfs crond laptop-mode dhcdbd networkmanager @alsa @hal @fam @gdm)
Last edited by dr/owned (2009-01-09 05:16:43)I assume you're running nm-applet --sm-disable once you get a window manager session up?
Try starting networkmanager after hal. From the wiki:
You must also "disable" the default network daemon, and add the hal, dhcdbd and networkmanager daemons in this order:
DAEMONS=( ... !network hal dhcdbd networkmanager ... )
Maybe you are looking for
-
How to insert a conditional image into a report
Hi I am fairly new to HTML DB, but I have managed to create my first application. I need a little help with one report. One of the columns in the report contains Y, N or R. The customer wants me to display a different coloured image depending on the
-
What is payment alignment report
what is payment alignment report...is ther any standard one in sap
-
Which compact camera wirelessly links to iPhoto
I am looking to buy a small wifi compact camera which will send images directly from the camera to my MacBook Pro using iPhoto and also sending them to my iPod. Many such cameras link to a PC but I can't see any which link directly to a MacBook. Can
-
I am unable to add wires to any vi on one of my computers.
I am unable to add wires to any vi on one of my computers. The installation was performed by a previous coworker. I cannot contact him. I'm not sure if he had some special settings which cause this or not. I copied all of the Tools/Options setting
-
Changed disks in my RAID, Aperture lost all referenced masters.
I have a G-Speed eS RAID system. I had 4 X 1TB disks. I decided to change the hard disks to 2TB ones to double my storage capacity. I retained the same volume name. I backed up the 2.5TB of data to 3 other disks and then copied it back to my upgraded