[SOLVED] Can't suspend... (P9X79 Deluxe & i7-3820)

I have a p9x79 deluxe M/B with an i7 3820.
When i suspend either as root or from gnome 3, and then wake up i just get a blank screen...
I have no SWAP partition (I already have 4 partitions on my disk)
I turned of Intel speedstep and tried some solutions from https://wiki.archlinux.org/index.php/Pm-utils, but nothing worked...
any ideas?
Thank you!!
Last edited by ttouch (2013-04-27 06:50:36)

message.log: http://pastebin.com/gFY3kbrF
pm-suspend.log: http://pastebin.com/2PdWB73S
nothing intresting... (to me )
i now have swap!

Similar Messages

How many times can I suspend (without billing) my service?

I know I can suspend it twice for at most 90 days each time. I'm wondering though whether it is possible to suspend it more than twice in a year as long as it's not for more than 180 days overall.
Since I have a smartphone and I'm on the more everything family plan, suspending without billing means that the bill will be 40 dollars less/month, right?
Thanks!

hybridhoneylp we'll make sure that everything is crystal clear! You're right on track, the maximum amount the line can be suspended without billing is 180 days within a 12 month rolling period. So you can suspend the line multiple time as long as the time frame does not extend beyond the 180 days. Suspending without billing will stop the monthly charges and the time the line is suspended will be added to the end of the contract. For all the details, please visit http://vz.to/1kuSN3C
AshleyS_VZW
Follow us on Twitter @VZWSupport

How can I suspend the job using IPP_CANCEL_JOB of ipp api

hi, Can anyone help how can I suspend the job using IPPCANCELJOB of ipp api,so that I can cancel my previous job.
thanks

As before, you should try http://lists.apple.com/mailman/listinfo/printing.

How can I suspend an App instalation

How can I suspend an App's instalation in my Ipad 2 that doesn't respond, I was installing an App, in the Ipad appeared a grey Icon named Waiting (esperando) and the App screen said Installing, but the process never ends.
I have rebooted the Ipad several times but the instalation continues freezed
What can I do???
Thanks
Pedro

Apps stuck in waiting or won't download
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download at a time on the iPad so that could be what is causing the problem.
If that doesn't work - sign out of your account, restart the iPad and then sign in again.
Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Go back to Settings>iTunes & App Store>Sign in and then try to update again. Tap one waiting icon only if necessary to start the download stream.
You can also try deleting the waiting icons - tap and hold down on an icon until it wiggles - the tap the X on the icon to delete it. Then try to download again.
You can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered.
If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

[Solved]Unable to suspend

Hi i have this situation:
i can suspend in ubuntu 8.10 with fglrx and in fedora 11 with vesa driver
i can't suspend in anythyng that uses free ati driver, i tried arch with xorg 1.5 and 1.6 and free drivers, ubuntu 9.04, mandriva 2008.1
My conclusion is that the free xf86-vide-ati is the main problem.
The laptop suspends but when it resumes it stays black and i can't get in tty1 or use ctrl+alt+del, i had to force a reboot.
Is it posible to fix this?
I downgraded to xorg 1.5 but catalyst-old from AUR requiers kernel 2.6.29 so i have to downgrade the kernel too but this mean to build my own modules for virtualbox and other programs that use kernel modules.
It would be nice to find a better way.
Thx
my video card
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
and i have a suspend log but not a resume log, in the suspend log i get a Suspend succesfull or something, no errors
I downgraded to kernel 2.6.29 and i installed catalys-old from AUR, i can suspend but i gel under 300 FPS
Last edited by simion314 (2009-07-11 13:05:32)

djszapi wrote:
Did you follow these pages ?
http://wiki.archlinux.org/index.php/Suspend_to_Disk
http://wiki.archlinux.org/index.php/Suspend_to_RAM
Have you ever tried for it other drivers too? Is it a kernel panic in this case? can't alt+sysrq+ S/U/B too?
I tried the s2ram and it didn't know my machine, same result as normal resume it hangs. I read there that are more trikc to try but i do not have the time now(exams) to try those combination. I hoped that other Archers with ATI cards have had this problem and can point me in the right direction.

Can I suspend my account for a month?

Can I suspend my account for a month?

If you are on a monthly plan, yes. Otherwise no.
Mylenium

[solved] can't turn computer off

hello!
yesterday I wanted to turn compiz on so i typed:
# compiz --replace
then the display gone a bit bad: I didn't have windows titles and all windows was in a bunch so I couldnt get to them.
then I typed:
# metacity --replace
and then the desktop retuned to look normally. (then I did some things with metacity and I got some error messages, but I dont remember what they was).
now when I type "metacity --replace" I got another error message:
# metacity --replace
No protocol specified
Window manager error: Unable to open X display :0.0
what it means and what should i do with it? (the desktop environment looks normally)
however, and that is the real problem, I can't suspend/hibernate/restart/shut down the computer. when I try to, it shows me weird black screen so I have to force the computer to turn off by pressing on the power button, and when I go to the computer after some time I see that it completely turned on... (all that functions worked until yesterday)
what can I do?
I use arch with gnome on toshiba laptop.
10x anyway.
ariel.
Last edited by ariel (2009-08-24 14:11:11)

well it seems that's not a hardware problem (feww.. )
because when I turn the computer off as narada wrote:
Shutdown without X: sudo init 0
it does not turn on
then it something in the definitions.
I want to find the problem by doing boot log. so I tried to do what T-Dawg wrote in http://bbs.archlinux.org/viewtopic.php? … 88#p113288:
T-Dawg wrote:
if your talking about the messages that appear after the Arch Wombat message but before the daemons load try renaming /etc/rc.sysinit to /etc/rc.sysinit2 and create a new /etc/rc.sysinit file with the same permissions as the original. In this file put:
#!/bin/bash
/etc/rc.sysinit2 2>somefile
that will echo standard error into somefile. If that doesn't give you the errors replace the 2 with & and both standard out and standard error will be logged into that file.
Make sure that new file is executable.
but I cant because it tells me that the filesystem is read-only.
how can I do a boot log?
is it ok to create /etc/rc.sysinit that will be look like:
#!/bin/bash
mount /dev/sda5 / -o rw
/etc/rc.sysinit2 2>somefile
or it might cause problems?

[SOLVED] Can't get suspend to ram to work (pm-utils)

It suspends, but then when I wake up my desktop the display is black. I followed the wiki, did things like add the resume hook, remove the autodetect hook, pm-is-supported returns empty, and I can't see from the pm-suspend.log what the issue could be
Initial commandline parameters:
Fri Jun 15 12:19:28 EDT 2012: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux dump9 3.4.2-3-ck #1 SMP PREEMPT Tue Jun 12 23:20:36 EDT 2012 x86_64 GNU/Linux
Module Size Used by
fuse 68256 3
dm_mod 70374 5
it87 28605 0
hwmon_vid 3164 1 it87
btusb 11604 0
bluetooth 187319 2 btusb
rfkill 15508 1 bluetooth
joydev 9895 0
usbhid 36046 0
hid 84805 1 usbhid
cx18_alsa 6389 1
mxl5005s 35031 1
s5h1409 9894 1
tuner_simple 13257 1
tuner_types 11121 1 tuner_simple
cs5345 2939 1
tda9887 8613 1
tda8290 12426 0
snd_hda_codec_hdmi 23640 4
tuner 16616 2
nvidia 12291043 30
nfs 274536 1
nfs_acl 2327 1 nfs
cx18 113932 1 cx18_alsa
lockd 62244 1 nfs
snd_hda_codec_via 37603 1
tveeprom 13777 1 cx18
i2c_algo_bit 5359 1 cx18
auth_rpcgss 32135 1 nfs
videobuf_vmalloc 4319 1 cx18
sunrpc 182965 8 nfs,auth_rpcgss,lockd,nfs_acl
fscache 40835 1 nfs
microcode 12281 0
firewire_ohci 31197 0
edac_mce_amd 12373 0
firewire_core 51008 1 firewire_ohci
powernow_k8 13360 1
edac_core 36624 0
mperf 1235 1 powernow_k8
videobuf_core 16007 2 cx18,videobuf_vmalloc
cx2341x 16956 1 cx18
dvb_core 94139 1 cx18
v4l2_common 5338 4 cx18,cx2341x,tuner,cs5345
videodev 92446 5 cx18,cx2341x,tuner,cs5345,v4l2_common
media 10117 1 videodev
snd_hda_intel 23765 5
snd_hda_codec 93089 3 snd_hda_codec_hdmi,snd_hda_codec_via,snd_hda_intel
snd_hwdep 6204 1 snd_hda_codec
snd_pcm 74574 5 cx18_alsa,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7249 2 snd_pcm,snd_hda_intel
snd_timer 18774 1 snd_pcm
snd 58325 19 cx18_alsa,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_via,snd_pcm,snd_hda_codec,snd_hda_intel
i2c_piix4 8224 0
soundcore 5378 1 snd
i2c_core 20241 14 cx18,tuner,i2c_piix4,tda8290,tda9887,i2c_algo_bit,cs5345,s5h1409,nvidia,v4l2_common,tveeprom,mxl5005s,tuner_simple,videodev
ohci_hcd 21400 0
ehci_hcd 40546 0
usbcore 146125 5 btusb,ohci_hcd,ehci_hcd,usbhid
usb_common 954 1 usbcore
k10temp 2915 0
r8169 48842 0
crc_itu_t 1363 1 firewire_core
mii 4059 1 r8169
ppdev 5806 0
parport_pc 30541 0
parport 31139 2 ppdev,parport_pc
processor 26567 1 powernow_k8
wmi 8411 0
sp5100_tco 4504 0
psmouse 70248 0
evdev 9722 26
serio_raw 4621 0
button 4502 0
hfsplus 78321 0
loop 18000 0
autofs4 23767 2
ext4 422063 4
jbd2 73535 1 ext4
mbcache 5977 1 ext4
crc16 1359 2 ext4,bluetooth
sr_mod 14663 0
sd_mod 29047 11
cdrom 35488 1 sr_mod
pata_acpi 3376 0
pata_atiixp 4000 5
ahci 20517 2
ata_generic 3295 0
libahci 19959 1 ahci
libata 165627 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
scsi_mod 132142 3 libata,sd_mod,sr_mod
total used free shared buffers cached
Mem: 8182220 2086832 6095388 0 65592 1007076
-/+ buffers/cache: 1014164 7168056
Swap: 2104476 0 2104476
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
Unloading kernel module ehci_hcd...Done.
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /etc/pm/sleep.d/90alsa suspend suspend:
/etc/pm/sleep.d/90alsa suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
nVidia binary video drive detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Fri Jun 15 12:19:29 EDT 2012: performing suspend
Last edited by boast (2012-06-16 21:21:45)

ewaller wrote:I have no experience with nVidia controllers; sorry. Does anyone know if it is normal to skip the quirks for that display?
Yes, that's normal and should work.
Looking at the module list maybe try stopping the video4linux before suspend.
To double check: boast, you rebuilt the kernel, yes?

[SOLVED] HAL doesn't work, so I can't suspend/hibernate?

I've placed (atleast what I think) to be the necessary daemons in rc.conf:
DAEMONS=(syslog-ng dbus md fam hal alsa network netfs crond)
FAM for XFCE..
When I run the suspend command, it states
"Failed to suspend: Suspend and hibernate are only supported by HAL and is not available."
#sudo /etc/rc.d/hal start:
:: Starting Hardware Abstraction Layer [FAIL]
This happens in root, and when I attempt to start and stop it....
It took endless configurations to get ndiswrapper to work, I've changed only but files required for network, why could hal not work? I can't find much online about how to fix it, and what steps there are if it fails to restart..
Last edited by Nullw0rm (2010-01-30 05:42:58)

Doehni wrote:
Try putting the network and netfs daemons before fam and hal.
Something like this:
DAEMONS=(syslog-ng dbus md alsa network netfs crond fam hal)
Hope it helps!
I tried this and it..sorta works, restarting HAL:
[me@myhost ~]$ sudo /etc/rc.d/hal restart
:: Stopping Hardware Abstraction Layer [DONE]
:: Starting Hardware Abstraction Layer [DONE]
(DONE instead of FAIL)
But going to suspend/hibernate it says HAL is not available still! I seem to not be able to set it up so well..
It says I already have pm-utils, but I ahead and installed that anyway (assuming mine wasn't dev release).
I can suspend with
$ sudo pm-suspend
But when I resume video doesn't start, my screen is black (not displaying black, more like off).. I'm on a laptop with an intel X3000 graphics chip, not a PC in case that helps.
Help
Last edited by Nullw0rm (2010-01-29 03:05:55)

[Solved] Can't pm-suspend via acpid

Hello fellow archers, I'm following the acpid wiki to suspend on pressing the sleep/suspend button and for some reason pm-suspend is not executed. Here are the relevant bits:
acpi_listen
button/suspend SUSP 00000080 00000000
/etc/acpi/handler.sh
button/sleep)
case "$2" in
SUSP) #echo -n mem >/sys/power/state ;;
/usr/sbin/pm-suspend ;;
*) logger "ACPI action undefined: $2" ;;
esac
tail -f /var/log/messages.log
localhost xxxx: ACPI group/action undefined: button/suspend / SUSP
It's getting logged but nothing happens.
Any help is appreciated
Last edited by snoxu (2012-04-28 03:52:31)

I don't think it was getting logged like you think.
localhost xxxx: ACPI group/action undefined: button/suspend / SUSP
^^^^^
The 'group/' is not in the snippet you provided. It must have been generated by some other part of your script.

[SOLVED] urxvt-unicode can't suspend with Ctrl-Z

as title of topic, how can i enable urxvt-unicode to work with Ctrl-Z?
thanks for reply.
EDIT: am using bash 4.2.29, arch: x84_64
Last edited by angelfalls (2012-07-09 08:27:58)

angelfalls wrote:
am sorry, am not test much enough to post this topic, but with nano i can't using Ctrl-Z when i am opening a file in console. with emacs, vim i can.
i tried to install xterm and the result is the same.
what i must to do with nano to enable this function?
$ man nano

[Solved] Can't remap special sleep key in Gnome 3.4

Hey,
my keyboard has a key that, by default, suspends the computer.
In gnome 3.2 I could remap that key, through gnome-control-center to hibernate instead.
I can still map it that way, but when I press it it still suspends.
Edit: Solved. If anyone has the same problem: I changed a switch with dconf-editor under org.gnome.settings-daemon.power there are several switches for buttons. Changed several from suspend to hibernate -> profit
Last edited by th3voic3 (2012-04-24 17:32:04)

Thanks for the replies. I don't have an xorg.conf file. I tried one (generated by Xorg -configure) in my attempts to fix the problem, but I deleted it when I didn't work.
I'm not at home right now, so I can't get the exact output from xrandr, but I know it showed that the resolution was 1024x768.
When I first installed the system I thought that I needed the xf86-video-s3 driver, but that didn't work (X just ignored it and used vesa) so after a bit of research I found that the driver I needed was xf86-video-savage, which, as you can see from the log file, it is using.
karol, I'll try your suggestion of the UseBIOS option when I get home. The problem in your link looks exactly like mine!

[SOLVED] can't access to /dev/ devices without superuser, using udev

Hello archers
Ive recently changed my distro from lubuntu to Arch64. In the way i've read many articles about trying to solve your problems in the wiki and such, the thing is, i made it this far without human help (exept some small talk with a friend) and i have encountered a mayor problem wich i can't solve by my own, i've been walking arround in circles and can't manage to get it working properly
$ uname -a
Linux Watch-Tower 3.2.11-1-ARCH #1 SMP PREEMPT Thu Mar 15 09:19:02 CET 2012 x86_64 AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ AuthenticAMD GNU/Linux
what i want to do:
- start PC
- insert pendrive/CD/DVD
- system will automatically mount the storage device
- be able to access it from PCmanFM (wich i've installed) without being r00t or superuser
- be able to unmount the storage device with a right click and "remove device" or such...
what i can do:
- insert a CD/DVD/USB-PENDRIVE and look at right column of PCmanFM to see it mounted (system will automatically mount the storage device)
- access the CD/DVD/USB-PENDRIVE files only if i use "sudo pcmanfm" and enter password first
- unmount only being a superuser or r00t
i hope i made myself clear. I've tryed to follow the wiki about udev and PCmanFM automount as regular user but if i add
exec ck-launch-session dbus-launch openbox-session
to my .xinitrc or to my slim.conf i get an error from SLiM that doesn't let me log in "slim failed to execute login command".
The only way that i can start openbox is by removing ck-launch-session of .xinitrc and/or slim.conf
i will post my confs in order to help others to understand what's happening what i don't for lack of experience and knowledge
rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# See 'man 5 rc.conf' for more details
# LOCALIZATION
HARDWARECLOCK=""
TIMEZONE="America/Argentina/Buenos_Aires"
KEYMAP="es"
CONSOLEFONT="161"
CONSOLEMAP=
LOCALE=es_AR-UTF.8
DAEMON_LOCALE="yes"
USECOLOR="yes"
# HARDWARE
MOD_AUTOLOAD="yes"
MODULES=()
USEDMRAID="no"
USEBTRFS="no"
USELVM="no"
# NETWORKING
HOSTNAME=Watch-Tower
interface=eth0
address=
netmask=
broadcast=
gateway=
NETWORK_PERSIST="no"
# DAEMONS
DAEMONS=(@udev @syslog-ng @network @dbus @crond)
.xinitrc:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
# exec ck-launch-session dbus-launch openbox-session
exec openbox-session
slim.conf:
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
#login_cmd /bin/bash -login ~/.xinitrc %session
login_cmd /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions xfce4,icewm,wmaker,blackbox
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user nicolas
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
auto_login yes
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme archlinux-simplyblack
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
hope someone has the answer out there, and is ready to share it,
thanks in advance.
Last edited by r@fitiiixxx (2012-03-21 07:19:32)

berbae wrote:
ck-launch-session is part of the consolekit package; is it installed on your machine?
And what do you have in the /etc/X11/xinit/xinitrc.d directory?
Also start your GUI and post, using code tags, the ouput of
ps -efww
You should also remember that there are log files to consult (in /var/log) to search for causes of problems...
I don't have LXDE, sorry for not telling you that before, just plain OpenBox wm. No DE in my machine. :S
$ sudo pacman -Ss consolekit
extra/consolekit 0.4.5-2 [installed]
A framework for defining and tracking users, login sessions, and seats
[nicolas@Watch-Tower xinitrc.d]$ ls
30-dbus 40-libcanberra-gtk-module pulseaudio xdg-user-dirs
what logs should i be looking for?
[nicolas@Watch-Tower log]$ ls
ConsoleKit crond.log.2 faillog slim.log.1.gz
Xorg.0.log daemon.log kernel.log syslog.log
Xorg.0.log.old daemon.log.1 kernel.log.1 syslog.log.1
Xorg.1.log daemon.log.2 kernel.log.2 syslog.log.2
auth.log dmesg.log lastlog user.log
auth.log.1 errors.log messages.log user.log.1
auth.log.2 errors.log.1 messages.log.1 user.log.2
boot errors.log.2 messages.log.2 wtmp
btmp everything.log old wtmp.1
crond.log everything.log.1 pacman.log
crond.log.1 everything.log.2 slim.log
ps -efww:
root 7 2 0 12:44 ? 00:00:00 [watchdog/0]
root 8 2 0 12:44 ? 00:00:00 [migration/1]
root 10 2 0 12:44 ? 00:00:00 [ksoftirqd/1]
root 11 2 0 12:44 ? 00:00:00 [kworker/0:1]
root 12 2 0 12:44 ? 00:00:00 [watchdog/1]
root 13 2 0 12:44 ? 00:00:00 [cpuset]
root 14 2 0 12:44 ? 00:00:00 [khelper]
root 15 2 0 12:44 ? 00:00:00 [kdevtmpfs]
root 16 2 0 12:44 ? 00:00:00 [netns]
root 17 2 0 12:44 ? 00:00:00 [sync_supers]
root 18 2 0 12:44 ? 00:00:00 [bdi-default]
root 19 2 0 12:44 ? 00:00:00 [kblockd]
root 40 2 0 12:44 ? 00:00:00 [khungtaskd]
root 41 2 0 12:44 ? 00:00:00 [kswapd0]
root 42 2 0 12:44 ? 00:00:00 [ksmd]
root 43 2 0 12:44 ? 00:00:00 [khugepaged]
root 44 2 0 12:44 ? 00:00:00 [fsnotify_mark]
root 45 2 0 12:44 ? 00:00:00 [crypto]
root 47 2 0 12:44 ? 00:00:00 [kthrotld]
root 89 2 0 12:44 ? 00:00:00 [ata_sff]
root 90 2 0 12:44 ? 00:00:00 [khubd]
root 95 2 0 12:44 ? 00:00:00 [scsi_eh_0]
root 96 2 0 12:44 ? 00:00:00 [scsi_eh_1]
root 99 2 0 12:44 ? 00:00:00 [kworker/u:2]
root 100 2 0 12:44 ? 00:00:00 [scsi_eh_2]
root 101 2 0 12:44 ? 00:00:00 [scsi_eh_3]
root 102 2 0 12:44 ? 00:00:00 [kworker/u:3]
root 109 2 0 12:44 ? 00:00:00 [kworker/0:2]
root 120 2 0 12:44 ? 00:00:00 [jbd2/sda3-8]
root 121 2 0 12:44 ? 00:00:00 [ext4-dio-unwrit]
root 170 1 0 12:44 ? 00:00:00 /lib/udev/udevd --daemon
root 207 170 0 12:44 ? 00:00:00 /lib/udev/udevd --daemon
root 208 170 0 12:44 ? 00:00:00 /lib/udev/udevd --daemon
root 210 2 0 12:44 ? 00:00:00 [edac-poller]
root 213 2 0 12:44 ? 00:00:00 [kpsmoused]
root 214 2 0 12:44 ? 00:00:00 [kworker/1:3]
root 223 2 0 12:44 ? 00:00:00 [hd-audio1]
root 248 2 0 12:44 ? 00:00:00 [ext4-dio-unwrit]
root 249 2 0 12:44 ? 00:00:00 [jbd2/sda4-8]
root 250 2 0 12:44 ? 00:00:00 [ext4-dio-unwrit]
root 286 2 0 12:44 ? 00:00:00 [flush-8:0]
dbus 551 1 0 12:44 ? 00:00:00 /usr/bin/dbus-daemon --system
root 553 1 0 12:44 ? 00:00:00 supervising syslog-ng
root 554 553 0 12:44 ? 00:00:00 /usr/sbin/syslog-ng
root 555 1 0 12:44 ? 00:00:00 /usr/sbin/NetworkManager
root 562 1 0 12:44 ? 00:00:00 /usr/lib/polkit-1/polkitd --no-debug
root 567 1 0 12:44 ? 00:00:00 /usr/sbin/crond
root 576 555 0 12:44 ? 00:00:00 /sbin/dhcpcd -B -K -L -G -c /usr/lib/networkmanager/nm-dhcp-client.action eth0
root 579 1 0 12:44 tty1 00:00:00 /sbin/agetty -8 -s 38400 tty1 linux
root 580 1 0 12:44 tty2 00:00:00 /sbin/agetty -8 -s 38400 tty2 linux
root 581 1 0 12:44 tty3 00:00:00 /sbin/agetty -8 -s 38400 tty3 linux
root 582 1 0 12:44 tty4 00:00:00 /sbin/agetty -8 -s 38400 tty4 linux
root 583 1 0 12:44 tty5 00:00:00 /sbin/agetty -8 -s 38400 tty5 linux
root 584 1 0 12:44 tty6 00:00:00 /sbin/agetty -8 -s 38400 tty6 linux
root 585 1 0 12:44 ? 00:00:00 /usr/bin/slim
root 587 585 1 12:44 tty7 00:00:21 /usr/bin/X -nolisten tcp vt07 -auth /var/run/slim.auth
root 591 1 0 12:44 ? 00:00:00 /usr/sbin/console-kit-daemon --no-daemon
nicolas 664 585 0 12:44 ? 00:00:00 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
nicolas 676 1 0 12:44 ? 00:00:00 /usr/bin/dbus-launch --sh-syntax --exit-with-session
nicolas 677 1 0 12:44 ? 00:00:00 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
nicolas 682 1 0 12:44 ? 00:00:00 /usr/bin/pulseaudio --start
rtkit 684 1 0 12:44 ? 00:00:00 /usr/lib/rtkit-daemon
nicolas 692 682 0 12:44 ? 00:00:00 /usr/lib/pulse/gconf-helper
nicolas 694 1 0 12:44 ? 00:00:00 /usr/lib/GConf/gconfd-2
nicolas 701 664 0 12:44 ? 00:00:00 /bin/sh /usr/lib/openbox/openbox-autostart OPENBOX
nicolas 707 701 0 12:44 ? 00:00:00 sh /home/nicolas/.config/openbox/autostart
nicolas 710 707 0 12:44 ? 00:00:01 wbar --bpress --above-desk --vbar --pos right --isize 47 --nanim 3
nicolas 714 707 0 12:44 ? 00:00:00 tint2
nicolas 715 707 0 12:44 ? 00:00:00 sh /home/nicolas/.config/openbox/autostart
nicolas 722 715 0 12:45 ? 00:00:01 wbar --bpress --above-desk --vbar --pos right --isize 47 --nanim 3
nicolas 726 1 0 12:45 ? 00:00:00 /usr/lib/gvfs/gvfsd
nicolas 732 1 0 12:45 ? 00:00:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/nicolas/.gvfs
nicolas 738 1 0 12:45 ? 00:00:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor
root 740 1 0 12:45 ? 00:00:00 /usr/lib/udisks/udisks-daemon
root 741 740 0 12:45 ? 00:00:00 udisks-daemon: not polling any devices
nicolas 746 1 0 12:45 ? 00:00:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor
nicolas 748 1 0 12:45 ? 00:00:00 /usr/lib/gvfs/gvfs-afc-volume-monitor
nicolas 762 1 0 12:46 ? 00:00:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.4 /org/gtk/gvfs/exec_spaw/0
nicolas 823 710 1 12:47 ? 00:00:18 midori
nicolas 829 1 0 12:47 ? 00:00:00 /usr/lib/gvfs/gvfsd-metadata
root 922 2 0 12:49 ? 00:00:00 [kworker/1:0]
root 930 2 0 12:54 ? 00:00:00 [kworker/1:1]
nicolas 951 664 0 13:00 ? 00:00:00 pcmanfm
nicolas 988 1 0 13:01 ? 00:00:00 leafpad /home/nicolas/.bash_history
nicolas 1029 664 0 13:03 ? 00:00:00 xterm -u8
nicolas 1030 1029 0 13:03 pts/0 00:00:00 bash
nicolas 1031 1030 0 13:03 pts/0 00:00:00 ps -efww
this is without ck-launch-session & dbus-launch!, if not, i wouldn't be posting this here...

Can't suspend Ultra 25 with Solaris 10

Folkses,
i try to suspend my machine with gnome-sys-suspend and get the following error:Apr 18 15:43:40 obelix2 cpr: System is being suspended
Apr 18 15:45:29 obelix2 cpr: WARNING: Could not stop "ufsreclaim" kernel thread. Please try again later.
Apr 18 15:45:41 obelix2 cpr: NOTICE: Suspend operation failed.
Apr 18 15:45:41 obelix2 cpr: System has been resumed.and obviously the system doen't suspend.
any ideas, what the means, why this is?
thomas

Hello,
You can use kdmconfig.
Let me know if it solved your issue. I have the same problem with solaris 10 b72... JDS cannot be loaded, and I come back to the login screen. But no problem with CDE.

[Solved] - Can't Log In After Upgrade

Just upgraded and now can't log in. System hangs at 'Reached target Graphical Interace.'
When I go to tty2 and try to log in, I get 'Log incorrect' error message when trying to log in as normal user or root.
Re-booted to runlevel 3 and tried to su to normal user. Get 'su: module is unknown' error.
Checked slim logs and see 'pam_setcred(): module is unknown' error.
Have re-installed pam and pambase.
Still can't log in. Appears to be a pam problem, but after many searches, can't find solution. Any ideas?
Update: I re-installed libgssglue package and that solved the problem. Not certain why that wasn't updated during the pacman -Su command, but I can now log into my system and everything is normal.
Last edited by twhayes (2013-10-19 19:49:21)

Hello,
If you are using SSH, I suspect you are hitting bug ID CSCuc03438:
The first SSH login password will always fail
Symptom:
The first SSH login password will fail.
Conditions:
This issue only applies to SSH logins on MDS 9100 and 9200 platforms. This includes CLI and SNMP logins.
Further Information:
Upgrading to defective code will break working applications such as TACACS or scripts.
Workaround:
Use Telnet
The fix will be in 5.2.6b expected to be available within the next two weeks.
Best regards,
Jim

[SOLVED] Can't suspend... (P9X79 Deluxe & i7-3820)

Similar Messages

Maybe you are looking for