[SOLVED] Cannot build Gnash on x86_64

I would like to build a custom Gnash with changes to the renderer and media options (--enable-renderer=all and --enable-media=gst), however, I am on a 64-bit system and my builds (I've tried gnash-common through the ABS and gnash-trunk-git from the AUR) consistently abort with these errors:
/usr/bin/ld: skipping incompatible /usr/lib32/libSDL.so when searching for -lSDL
/usr/bin/ld: skipping incompatible /usr/lib32/libgobject-2.0.so when searching for -lgobject-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libgobject-2.0.a when searching for -lgobject-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libgmodule-2.0.so when searching for -lgmodule-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libgmodule-2.0.a when searching for -lgmodule-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libgthread-2.0.so when searching for -lgthread-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libgthread-2.0.a when searching for -lgthread-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libxml2.so when searching for -lxml2
/usr/bin/ld: skipping incompatible /usr/lib32/libxml2.a when searching for -lxml2
/usr/bin/ld: skipping incompatible /usr/lib32/libglib-2.0.so when searching for -lglib-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libglib-2.0.a when searching for -lglib-2.0
/usr/bin/ld: skipping incompatible /usr/lib32/libjpeg.so when searching for -ljpeg
/usr/bin/ld: skipping incompatible /usr/lib32/libjpeg.a when searching for -ljpeg
/usr/bin/ld: skipping incompatible /usr/lib32/libgif.so when searching for -lgif
/usr/bin/ld: skipping incompatible /usr/lib32/libgif.a when searching for -lgif
/usr/bin/ld: skipping incompatible /usr/lib32/libltdl.so when searching for -lltdl
/usr/bin/ld: skipping incompatible /usr/lib32/libltdl.a when searching for -lltdl
/usr/bin/ld: skipping incompatible /usr/lib32/libGL.so when searching for -lGL
/usr/bin/ld: skipping incompatible /usr/lib32/libGLU.so when searching for -lGLU
/usr/lib32/libcairo.so: could not read symbols: File in wrong format
(it aborts here)
Google turns up nothing useful, unfortunately. I recall having this issue on Debian as well, so it's not Arch-specific (but it is architecture-specific-- my Debian install was 64-bit as well). What can I do to fix this?
Last edited by DrKillPatient (2012-07-05 23:27:12)

Aha, I've fixed it. Info on this error was quite hard to find, but I found something on a mailing list mentioning that if one uses a multilib system, 64-bit with both /usr/lib and /usr/lib32, Gnash will use /usr/lib32, although it shouldn't do so. In order to fix this bug, one must edit the "libslist" file at gnash-0.8.10/macros/libslist. In it, there are two entries that include "lib32". Remove those entries entirely (entries are separated by spaces), then build Gnash as normal. (Since I used the gnash package from the ABS, this required the usual 'makepkg -s', albeit with a modfied PKGBULD that replaces the default macros/libslist with a fixed version before building.) Packages for gnash-gtk and gnash-common should be generated.
I applied this fix to gnash 0.8.10 from the community repo, but I assume it works similarly with gnash-git from the AUR.
EDIT: Well, it installed... but it's just giving me a blank video area when I open a Youtube page. Running firefox from the terminal gives me no error messages...
EDIT 2: Any one of various versions of gnash (git, community repo, custom builds) seem to give a blank video area on Youtube. Still no error messages. What can I do now?
Last edited by DrKillPatient (2012-07-03 03:17:24)

Similar Messages

[SOLVED] Cannot build lightspark

Hi,
I have tried to build lightspark 0.7.2-1 and lightspark-git 20130215-2 from AUR but it always fails with same errors: "A failure occurred in build().".
I also tried to modify the pkgver to 0.7.1 in the lightspark PKGBUILD to see if it was verion related, but it didn't change anything.
Here is the output of lightspark 0.7.2-1 (note that I temporarily changed the locale to English to post it on the forum):
bp@bp-laptop ~
> yaourt -S lightspark
==> Downloading lightspark PKGBUILD from AUR...
bsdtar: Failed to set default locale
x PKGBUILD
x lightspark.install
Comment by tsester (2013-02-02 15:00)
it takes too much ram while compiling
Comment by FredBezies (2013-04-30 11:03)
0.7.2 PKGBUILD : http://pastebin.com/JR8xT9T7
Comment by cactaur (2013-06-20 18:41)
When I tried to build, I got that it failed with an error:
[ 4%] Building CXX object src/CMakeFiles/spark.dir/scripting/abc.cpp.o
/home/gregory/lightspark/src/lightspark-0.7.2/src/scripting/abc.cpp:26:25: fatal error: llvm/Module.h: No such file or directory
#include llvm/Module.h
Apparently this had to do with a change in naming in LLVM 3.3, which is now released, and that broke the code.
https://bugs.launchpad.net/lightspark/+bug/1157158
The issue was fixed in the development version, but hasn't been officially released yet. I'm not sure if there's a workaround for this release that can be incorporated into the PKGBUILD or if it should just stay broken until the official upstream release, but in the meantime, the lightspark-git package should provide a program that compiles. Just thought I'd give a heads-up.
Comment by the-kyle (2013-08-09 17:39)
I am seeing errors similar to the following when I try to build this package.
In file included from /tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/scripting/flash/net/flashnet.h:29:0,
from /tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/swf.h:32,
from /tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/scripting/class.h:27,
from /tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/scripting/toplevel/ASString.h:23,
from /tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/allclasses.cpp:20:
/tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/backends/decoder.h:31:30: error: ‘AVCODEC_MAX_AUDIO_FRAME_SIZE’ was not declared in this scope
#define MAX_AUDIO_FRAME_SIZE AVCODEC_MAX_AUDIO_FRAME_SIZE
^
/tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/backends/decoder.h:201:19: note: in expansion of macro ‘MAX_AUDIO_FRAME_SIZE’
int16_t samples[MAX_AUDIO_FRAME_SIZE/2];
^
/tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/backends/decoder.h: In constructor ‘lightspark::AudioDecoder::FrameSamples::FrameSamples()’:
/tmp/packerbuild-1000/lightspark/lightspark/src/lightspark-0.7.2/src/backends/decoder.h:206:26: error: ‘samples’ was not declared in this scope
FrameSamples():current(samples),len(0),time(0){}
^
make[2]: *** [src/CMakeFiles/spark.dir/asobject.cpp.o] Error 1
I only included one such error here, but these appear to be numerous. Am I missing a package that hasn't been included as a dependency? I'm building on a 64-bit system with 8 processor cores that satisfies all the dependencies listed above.
Comment by dlh (2013-08-13 15:39)
I have the same issue as @the-kyle
lightspark 0.7.2-1 (Sat Feb 11 02:47:02 CET 2012)
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> lightspark dependencies:
- gtk2 (already installed)
- ffmpeg (already installed)
- glew (already installed)
- curl (already installed)
- boost-libs (already installed)
- libxml++ (already installed)
- desktop-file-utils (already installed)
- hicolor-icon-theme (already installed)
- cmake (already installed)
- nasm (already installed)
- xulrunner (already installed)
- llvm (already installed)
- glproto (already installed)
- boost (already installed)
- fontconfig (already installed)
==> Edit lightspark.install ? [Y/n] ("A" to abort)
==> ----------------------------------------------
==> n
==> Continue building lightspark ? [Y/n]
==> ------------------------------------
==>
==> Building and installing package
==> Making package: lightspark 0.7.2-1 (Sat Aug 17 12:44:43 CEST 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Downloading lightspark-0.7.2.tar.gz...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 933k 100 933k 0 0 482k 0 0:00:01 0:00:01 --:--:-- 756k
-> Downloading lightspark-0.7.2.tar.gz.asc...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
100 490 100 490 0 0 848 0 --:--:-- --:--:-- --:--:-- 848
==> Validating source files with md5sums...
lightspark-0.7.2.tar.gz ... Passed
lightspark-0.7.2.tar.gz.asc ... Skipped
==> Verifying source file signatures with gpg...
lightspark-0.7.2.tar.gz ... FAILED (unknown public key B96B97E45A52AE91)
==> WARNING: Warnings have occurred while verifying the signatures.
Please make sure you really trust them.
==> Extracting sources...
-> Extracting lightspark-0.7.2.tar.gz with bsdtar
bsdtar: Failed to set default locale
==> Starting build()...
-- The C compiler identification is GNU 4.8.1
-- The CXX compiler identification is GNU 4.8.1
-- Check for working C compiler: /usr/bin/cc
-- Check for working C compiler: /usr/bin/cc -- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Check for working CXX compiler: /usr/bin/c++
-- Check for working CXX compiler: /usr/bin/c++ -- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Performing Test GCC_IS_4_6
-- Performing Test GCC_IS_4_6 - Success
-- Found gnash path: /usr/bin/gtk-gnash
-- The ASM-NASM compiler identification is unknown
-- Found assembler: /usr/bin/nasm
-- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
-- LLVM llvm-config found at: /usr/bin/llvm-config
-- LLVM version: 3.3
-- Looking for C++ include llvm/Support/TargetSelect.h
-- Looking for C++ include llvm/Support/TargetSelect.h - found
-- HAVE_SUPPORT_TARGETSELECT_H: 1
-- Looking for C++ include llvm/IRBuilder.h
-- Looking for C++ include llvm/IRBuilder.h - not found
-- HAVE_IRBUILDER_H:
-- Looking for C++ include llvm/DataLayout.h
-- Looking for C++ include llvm/DataLayout.h - not found
-- HAVE_DATALAYOUT_H:
-- LLVM CXX flags: -I/usr/include -DNDEBUG -D_GNU_SOURCE -D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS -D__STDC_LIMIT_MACROS -O3 -fomit-frame-pointer -fvisibility-inlines-hidden -fno-exceptions -fPIC -Woverloaded-virtual -Wcast-qual
-- LLVM LD flags: -L/usr/lib -lz -lpthread -lffi -ldl -lm
-- LLVM core libs: -lLLVMLinker-lLLVMBitWriter-lLLVMBitReader-lLLVMInstrumentation-lLLVMipo-lLLVMObjCARCOpts-lLLVMVectorize-lLLVMScalarOpts-lLLVMInstCombine-lLLVMTransformUtils-lLLVMipa-lLLVMAnalysis-lLLVMTarget-lLLVMMC-lLLVMObject-lLLVMCore-lLLVMSupport
-- LLVM JIT libs: -lLLVMX86Disassembler-lLLVMX86AsmParser-lLLVMX86CodeGen-lLLVMSelectionDAG-lLLVMAsmPrinter-lLLVMMCParser-lLLVMX86Desc-lLLVMX86Info-lLLVMX86AsmPrinter-lLLVMX86Utils-lLLVMJIT-lLLVMRuntimeDyld-lLLVMExecutionEngine-lLLVMCodeGen-lLLVMObjCARCOpts-lLLVMScalarOpts-lLLVMInstCombine-lLLVMTransformUtils-lLLVMipa-lLLVMAnalysis-lLLVMTarget-lLLVMMC-lLLVMObject-lLLVMCore-lLLVMSupport
-- LLVM JIT objs:
-- Found LLVM: /usr/include
-- Found ZLIB: /usr/lib64/libz.so (found version "1.2.8")
-- Found Freetype: /usr/lib64/libfreetype.so
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so
-- Looking for XOpenDisplay in /usr/lib64/libX11.so;/usr/lib64/libXext.so - found
-- Looking for gethostbyname
-- Looking for gethostbyname - found
-- Looking for connect
-- Looking for connect - found
-- Looking for remove
-- Looking for remove - found
-- Looking for shmat
-- Looking for shmat - found
-- Looking for IceConnectionNumber in ICE
-- Looking for IceConnectionNumber in ICE - found
-- Found X11: /usr/lib64/libX11.so
-- Found OpenGL: /usr/lib64/libGL.so
-- Found GLEW: /usr/lib64/libGLEW.so
-- Found PCRE: /usr/lib64/libpcre.so
-- Found JPEG: /usr/lib64/libjpeg.so
-- Found PNG: /usr/lib64/libpng.so (found version "1.6.3")
-- checking for module 'libxml++-2.6>=2.33.1'
-- found libxml++-2.6, version 2.36.0
-- checking for module 'liblzma'
-- found liblzma, version 5.0.5
-- Boost version: 1.54.0
-- Found the following Boost libraries:
-- filesystem
-- system
-- checking for modules 'cairo;pangocairo'
-- found cairo, version 1.12.14
-- found pangocairo, version 1.34.1
-- checking for module 'x11'
-- found x11, version 1.6.1
-- checking for modules 'libavcodec;libavutil;libavformat'
-- found libavcodec, version 55.18.102
-- found libavutil, version 52.38.100
-- found libavformat, version 55.12.100
-- Looking for avcodec_decode_video2
-- Looking for avcodec_decode_video2 - found
-- Looking for avcodec_decode_audio3
-- Looking for avcodec_decode_audio3 - found
-- Looking for avcodec_decode_audio4
-- Looking for avcodec_decode_audio4 - found
-- Looking for avio_alloc_context
-- Looking for avio_alloc_context - found
-- Looking for avcodec_alloc_context3
-- Looking for avcodec_alloc_context3 - found
-- Looking for avcodec_open2
-- Looking for avcodec_open2 - found
-- Looking for avformat_close_input
-- Looking for avformat_close_input - found
-- Looking for avformat_find_stream_info
-- Looking for avformat_find_stream_info - found
-- checking for module 'glib-2.0'
-- found glib-2.0, version 2.36.3
-- checking for module 'gthread-2.0'
-- found gthread-2.0, version 2.36.3
-- checking for module 'gmodule-2.0'
-- found gmodule-2.0, version 2.36.3
-- checking for module 'glibmm-2.4'
-- found glibmm-2.4, version 2.36.2
-- checking for module 'gtk+-2.0'
-- found gtk+-2.0, version 2.24.20
-- checking for module 'libcurl'
-- found libcurl, version 7.32.0
-- checking for module 'librtmp'
-- found librtmp, version v2.4
-- Looking for C++ include atomic
-- Looking for C++ include atomic - found
-- checking for module 'libpulse'
-- found libpulse, version 4.0
-- Configuring done
-- Generating done
-- Build files have been written to: /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/bld
Scanning dependencies of target translations
[ 1%] Scanning dependencies of target spark
[ 2%] [ 3%] Generating fr.gmo
Generating pl.gmo
Generating zh_CN.gmo
[ 3%] Built target translations
[ 4%] [ 5%] [ 6%] [ 7%] Building CXX object src/CMakeFiles/spark.dir/compat.cpp.o
Building CXX object src/CMakeFiles/spark.dir/allclasses.cpp.o
Building CXX object src/CMakeFiles/spark.dir/asobject.cpp.o
Building CXX object src/CMakeFiles/spark.dir/logger.cpp.o
[ 8%] Building CXX object src/CMakeFiles/spark.dir/memory_support.cpp.o
[ 9%] Building CXX object src/CMakeFiles/spark.dir/swf.cpp.o
In file included from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/flash/net/flashnet.h:29:0,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.h:32,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/class.h:27,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/toplevel/ASString.h:23,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/allclasses.cpp:20:
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:31:30: error: 'AVCODEC_MAX_AUDIO_FRAME_SIZE' was not declared in this scope
#define MAX_AUDIO_FRAME_SIZE AVCODEC_MAX_AUDIO_FRAME_SIZE
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:201:19: note: in expansion of macro 'MAX_AUDIO_FRAME_SIZE'
int16_t samples[MAX_AUDIO_FRAME_SIZE/2];
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h: In constructor 'lightspark::AudioDecoder::FrameSamples::FrameSamples()':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:206:26: error: 'samples' was not declared in this scope
FrameSamples():current(samples),len(0),time(0){}
^
In file included from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/flash/net/flashnet.h:29:0,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.h:32,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/class.h:27,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/parsing/tags.h:29,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/abc.h:25,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/asobject.cpp:20:
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:31:30: error: 'AVCODEC_MAX_AUDIO_FRAME_SIZE' was not declared in this scope
#define MAX_AUDIO_FRAME_SIZE AVCODEC_MAX_AUDIO_FRAME_SIZE
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:201:19: note: in expansion of macro 'MAX_AUDIO_FRAME_SIZE'
int16_t samples[MAX_AUDIO_FRAME_SIZE/2];
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h: In constructor 'lightspark::AudioDecoder::FrameSamples::FrameSamples()':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:206:26: error: 'samples' was not declared in this scope
FrameSamples():current(samples),len(0),time(0){}
^
In file included from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/flash/net/flashnet.h:29:0,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.h:32,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/memory_support.cpp:21:
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:31:30: error: 'AVCODEC_MAX_AUDIO_FRAME_SIZE' was not declared in this scope
#define MAX_AUDIO_FRAME_SIZE AVCODEC_MAX_AUDIO_FRAME_SIZE
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:201:19: note: in expansion of macro 'MAX_AUDIO_FRAME_SIZE'
int16_t samples[MAX_AUDIO_FRAME_SIZE/2];
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h: In constructor 'lightspark::AudioDecoder::FrameSamples::FrameSamples()':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:206:26: error: 'samples' was not declared in this scope
FrameSamples():current(samples),len(0),time(0){}
^
In file included from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/flash/net/flashnet.h:29:0,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.h:32,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/class.h:27,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/parsing/tags.h:29,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/scripting/abc.h:25,
from /tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:23:
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:31:30: error: 'AVCODEC_MAX_AUDIO_FRAME_SIZE' was not declared in this scope
#define MAX_AUDIO_FRAME_SIZE AVCODEC_MAX_AUDIO_FRAME_SIZE
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:201:19: note: in expansion of macro 'MAX_AUDIO_FRAME_SIZE'
int16_t samples[MAX_AUDIO_FRAME_SIZE/2];
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h: In constructor 'lightspark::AudioDecoder::FrameSamples::FrameSamples()':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/backends/decoder.h:206:26: error: 'samples' was not declared in this scope
FrameSamples():current(samples),len(0),time(0){}
^
make[2]: *** [src/CMakeFiles/spark.dir/allclasses.cpp.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: *** [src/CMakeFiles/spark.dir/asobject.cpp.o] Error 1
make[2]: *** [src/CMakeFiles/spark.dir/memory_support.cpp.o] Error 1
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp: In function 'lightspark::SystemState* lightspark::getSys()':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:58:35: warning: 'void* g_static_private_get(GStaticPrivate*)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:246): Use 'g_private_get' instead [-Wdeprecated-declarations]
SystemState* ret = (SystemState*)g_static_private_get(&tls_system);
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:58:67: warning: 'void* g_static_private_get(GStaticPrivate*)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:246): Use 'g_private_get' instead [-Wdeprecated-declarations]
SystemState* ret = (SystemState*)g_static_private_get(&tls_system);
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp: In function 'void lightspark::setTLSSys(lightspark::SystemState*)':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:64:9: warning: 'void g_static_private_set(GStaticPrivate*, gpointer, GDestroyNotify)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:249): Use 'g_private_set' instead [-Wdeprecated-declarations]
g_static_private_set(&tls_system,sys,NULL);
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:64:50: warning: 'void g_static_private_set(GStaticPrivate*, gpointer, GDestroyNotify)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:249): Use 'g_private_set' instead [-Wdeprecated-declarations]
g_static_private_set(&tls_system,sys,NULL);
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp: In function 'lightspark::ParseThread* lightspark::getParseThread()':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:70:34: warning: 'void* g_static_private_get(GStaticPrivate*)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:246): Use 'g_private_get' instead [-Wdeprecated-declarations]
ParseThread* pt = (ParseThread*)g_static_private_get(&parse_thread_tls);
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:70:72: warning: 'void* g_static_private_get(GStaticPrivate*)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:246): Use 'g_private_get' instead [-Wdeprecated-declarations]
ParseThread* pt = (ParseThread*)g_static_private_get(&parse_thread_tls);
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp: In member function 'virtual void lightspark::ParseThread::execute()':
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:1274:2: warning: 'void g_static_private_set(GStaticPrivate*, gpointer, GDestroyNotify)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:249): Use 'g_private_set' instead [-Wdeprecated-declarations]
g_static_private_set(&parse_thread_tls,this,NULL);
^
/tmp/yaourt-tmp-bp/aur-lightspark/src/lightspark-0.7.2/src/swf.cpp:1274:50: warning: 'void g_static_private_set(GStaticPrivate*, gpointer, GDestroyNotify)' is deprecated (declared at /usr/include/glib-2.0/glib/deprecated/gthread.h:249): Use 'g_private_set' instead [-Wdeprecated-declarations]
g_static_private_set(&parse_thread_tls,this,NULL);
^
make[2]: *** [src/CMakeFiles/spark.dir/swf.cpp.o] Error 1
make[1]: *** [src/CMakeFiles/spark.dir/all] Error 2
make: *** [all] Error 2
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build lightspark.
==> Restart building lightspark ? [y/N]
==> -----------------------------------
==>
I can't find if it is related to the lighspark code or if it is specific to Arch Linux.
Last edited by mau5kito (2013-08-17 14:48:24)

It seems lightspark was written for an old version of ffmpeg. I was able to solve some problems with patches, but more and more would keep popping up.
There is a -git version which should work. I'm compiling it now to verify - and so far so good (but it's taking a while on my old hardware).
EDIT: confirmed, lightspark-git builds fine.
Last edited by Trilby (2013-08-17 12:37:31)

[SOLVED] Cannot build Cinnamon 1.6.7-3 due to 404 URL error

Hi ,
just attempted to build and install Cinnamon from AUR , but building stops due to "Requested URL not found 404 error".
Here are the complete results
==> Making package: cinnamon 1.6.7-3 (Sat Dec 15 15:40:32 EET 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found cinnamon-1.6.7.tar.gz
-> Downloading cinnamon-screensaver.desktop...
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- 0:00:02 --:--:-- 0
curl: (22) The requested URL returned error: 404 Not Found
==> ERROR: Failure while downloading cinnamon-screensaver.desktop
Aborting...
Of course I have Internet up and running as I post right now and already build and installed muffin-wm (the required dependency without problems.)
Tried to uncomment some other mirrors , but to no avail.
Should I wait ? (maybe server is down or URL moved ? )
Thanks
Last edited by NikTh (2012-12-16 04:26:33)

There you go:
# Maintainer:
# Contributor: M0Rf30
# Contributor: unifiedlinux
# Contributor: CReimer
pkgname=cinnamon
pkgver=1.6.7
pkgrel=3
pkgdesc="Linux desktop which provides advanced innovative features and a traditional user experience"
arch=('i686' 'x86_64')
url="http://cinnamon.linuxmint.com/"
license=('GPL2')
depends=('caribou' 'gjs' 'gnome-bluetooth' 'gnome-control-center' 'gnome-panel' 'gnome-session'
'gnome-settings-daemon' 'gnome-themes-standard' 'gstreamer0.10' 'libgnomekbd' 'muffin-wm'
'notification-daemon' 'python2-gconf' 'python2-imaging' 'python2-lxml' 'python2-dbus')
makedepends=('gnome-common' 'intltool')
optdepends=('nemo-fm: Official Cinnamon file manager (a Nautilus fork)'
'nautilus: Official Gnome file manager')
options=('!libtool' '!emptydirs')
install=${pkgname}.install
source=("$pkgname-$pkgver.tar.gz::https://github.com/linuxmint/$pkgname/tarball/$pkgver"
https://github.com/faidoc/cinnarch-packages/blob/master/cinnamon/cinnamon-screensaver.desktop
https://github.com/faidoc/cinnarch-packages/blob/master/cinnamon/cinnamon2d-screensaver.desktop)
build() {
cd ${srcdir}/linuxmint-Cinnamon*
sed -i 's/\ --warn-all\ --warn-error//' src/Makefile.am
./autogen.sh --prefix=/usr \
--sysconfdir=/etc \
--libexecdir=/usr/lib/cinnamon \
--localstatedir=/var \
--disable-static \
--disable-schemas-compile \
--enable-compile-warnings=yes \
--with-session-tracking=systemd
make
package() {
cd ${srcdir}/linuxmint-Cinnamon*
make DESTDIR="${pkgdir}" install
#Run python2 instead of python(3)
sed -i 's/bin\/python/bin\/python2/g' \
"${pkgdir}/usr/bin/$pkgname-extension-tool" \
"${pkgdir}/usr/bin/$pkgname-launcher" \
"${pkgdir}/usr/bin/$pkgname-menu-editor" \
"${pkgdir}/usr/bin/$pkgname-settings" \
"${pkgdir}/usr/share/$pkgname/applets/panel-launchers@$pkgname.org/$pkgname-add-panel-launcher.py"
sed -i 's/env python/env python2/g' \
"${pkgdir}/usr/lib/$pkgname-settings/$pkgname-settings.py"
install -Dm644 $srcdir/${pkgname}-screensaver.desktop ${pkgdir}/etc/xdg/autostart/${pkgname}-screensaver.desktop
install -Dm644 $srcdir/${pkgname}2d-screensaver.desktop ${pkgdir}/etc/xdg/autostart/${pkgname}2d-screensaver.desktop
md5sums=('ea73c6367d43d82c61f977477bf0c08c'
'd55c079cdc8bec606f510f87b2a6f776'
'5c6af851ab1cf7e9219f11d86353196a')
md5sums=('ea73c6367d43d82c61f977477bf0c08c'
'edbb612b0ed725b87d743654fbb9f3e3'
'36a2725ca983e9f5d6b3e6a9ea6e0113')

[SOLVED] Cannot build pd-extended-svn

Trying to install pd-extended-svn from AUR.
here's the error:
http://pastebin.com/m3f32dae6
thanks
Cleaned my AUR build dir and it's a go now. cheers
Last edited by bloodniece (2009-04-28 05:40:10)

Trying to install pd-extended-svn from AUR.
here's the error:
http://pastebin.com/m3f32dae6
thanks
Cleaned my AUR build dir and it's a go now. cheers
Last edited by bloodniece (2009-04-28 05:40:10)

[SOLVED] Cannot build openswan from AUR

Hello everybody,
I have an error when I try to upgrade openswan with yaourt/AUR (2.6.24-2 => 2.6.25-1) on a i686 arch install
This is the error :
make[3]: Entering directory `/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/OBJ.linux.i386/programs/addconn'
cc -c -fno-strict-aliasing -g -Werror -DKLIPS -DSCANDIR_HAS_CONST -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/ports/linux/include -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/ports/linux/include -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/ports/linux/include -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/ports/linux/include -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/programs/pluto -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/programs/addconn/ -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25 -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/linux/include -I/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/include -Wall -Wpointer-arith -Wcast-qual -Wstrict-prototypes -Wbad-function-cast -DKLIPS -DNAT_TRAVERSAL -DNAT_TRAVERSAL -DKERNEL_ALG -DIKE_ALG -DFINALCONFDIR=\"/etc\" -DFINALCONFDDIR=\"/etc/ipsec.d\" -DFINALCONFFILE=\"/etc/ipsec.conf\" -DFINALVARDIR=\"/var\" -Werror /tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/programs/addconn/addconn.c
cc1: warnings being treated as errors
In file included from /tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/programs/addconn/addconn.c:51:0:
/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/include/ipsecconf/confread.h:37:19: error: comparison between 'enum keyword_string_config_field' and 'enum keyword_string_conn_field'
/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/include/ipsecconf/confread.h:38:19: error: comparison between 'enum keyword_numeric_config_field' and 'enum keyword_numeric_conn_field'
/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/include/ipsecconf/confread.h:39:34: error: comparison between 'enum keyword_string_config_field' and 'enum keyword_string_conn_field'
/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/include/ipsecconf/confread.h:40:34: error: comparison between 'enum keyword_numeric_config_field' and 'enum keyword_numeric_conn_field'
make[3]: *** [addconn.o] Error 1
make[3]: Leaving directory `/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/OBJ.linux.i386/programs/addconn'
make[2]: *** [programs] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/OBJ.linux.i386/programs'
make[1]: *** [programs] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/OBJ.linux.i386'
make: *** [programs] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build openswan package.
Error: unable to update openswan
Following packages have not been installed:
openswan
Is a bug with the AUR package or is a problème on my install ?
Thx for the help.
Olive
Last edited by nolive (2010-05-05 06:58:38)

ok, that's build when I comment this in /tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25/programs/Makefile.program
# die if there are any warnings
ifndef WERROR
#WERROR:= -Werror
endif
And run the compile directly (not with yaourt or pkgbuild) with
sudo make programs install
in /tmp/yaourt-tmp-olivier/aur-openswan/openswan/src/openswan-2.6.25
But my ipsec VPN don't work :
sudo ipsec auto --up toto
003 ERROR: "toto" #1: sendto on eth0 to xxx.xxx.xxx.xxx:500 failed in main_outI1. Errno 22: Invalid argument
104 "toto" #1: STATE_MAIN_I1: initiate
010 "toto" #1: STATE_MAIN_I1: retransmission; will wait 20s for response
003 ERROR: "toto" #1: sendto on eth0 to xxx.xxx.xxx.xxx:500 failed in EVENT_RETRANSMIT. Errno 22: Invalid argument
010 "toto" #1: STATE_MAIN_I1: retransmission; will wait 40s for response
003 ERROR: "toto" #1: sendto on eth0 to xxx.xxx.xxx.xxx:500 failed in EVENT_RETRANSMIT. Errno 22: Invalid argument
Thank's for your help. I haven't the skills for checking the code.

Cannot build ov51x-jpeg webcam driver on x86_64

Hi,
since I installed kernel 2.6.29 I cannot build the ov51x-jpeg webcam driver anymore.
I only modified the PKGBUILD on row 3: _kernver=${uname -r} -> _kernver=`uname -r` (first one did not work for me).
This is the build log:
make -C /lib/modules/2.6.29-ARCH/build M=/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9 modules
make[1]: Entering directory `/usr/src/linux-2.6.29-ARCH'
CC [M] /tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.o
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:543: error: 'v4l_compat_ioctl32' undeclared here (not in a function)
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: In function 'create_proc_ov511_cam':
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:677: error: implicit declaration of function 'info'
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: In function 'ov51x_clear_snapshot':
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:1691: error: implicit declaration of function 'warn'
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: In function 'ov51x_v4l1_ioctl':
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: warning: passing argument 1 of 'video_usercopy' from incompatible pointer type
include/media/v4l2-ioctl.h:296: note: expected 'struct file *' but argument is of type 'struct inode *'
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: warning: passing argument 2 of 'video_usercopy' makes integer from pointer without a cast
include/media/v4l2-ioctl.h:296: note: expected 'unsigned int' but argument is of type 'struct file *'
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: warning: passing argument 4 of 'video_usercopy' makes pointer from integer without a cast
include/media/v4l2-ioctl.h:296: note: expected 'v4l2_kioctl' but argument is of type 'long unsigned int'
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6386: error: too many arguments to function 'video_usercopy'
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c: At top level:
/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.c:6651: warning: initialization from incompatible pointer type
make[2]: *** [/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9/ov51x-jpeg-core.o] Error 1
make[1]: *** [_module_/tmp/yaourt-tmp-stefano/aur-ov51x-jpeg/ov51x-jpeg/src/ov51x-jpeg-1.5.9] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.29-ARCH'
make: *** [all] Error 2
I checked the v4l_compat_ioctl32 driver, but I only have the v4l2_compat_ioctl32 and v4l1_compact. I am using a stock kernel 2.6.29.3-1 for x86_64.
Any hints?
Thanks,
gm

Hi
I have the same problem within i686.
The new 2.6.29 kernel is not compatible with this version of the driver.
I suppose we have to wait ....
Serge
Last edited by cserge (2009-05-18 13:05:28)

[SOLVED]Cannot compile Wine on Arch64

I am trying to compile the 32 bit version of Wine on Arch 64. I know I could use PKGBUILDS and all that but I want to compile it from scratch.
I am not very experienced (at all) so please post in retard language for me.
bash-3.2# ./configure
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for cpp... cpp
checking whether gcc -m32 works... no
configure: error: Cannot build a 32-bit program, you need to install 32-bit development libraries.
I have installed the lib32 package, I don't know what I'm missing. I have done this before on an X86_64 system but never on Arch Linux.
Any ideas on what I might need?
Thanks!
Last edited by speng (2009-01-18 02:37:28)

speng wrote:
I'll try this. When I have compiled wine, do I need to use the Arch32 system every time I want to load a program?
Also, is this the only way to do it?
Thanks.
You're going to need a bunch of 32 bit libraries to run 32 bit Wine. Either a chroot or lib32 libraries will work.
I don't know much about cross compilers, so I can't help with your other question. What distro were you running when you did this before?

SAPConnect, Message no. XS 818, Cannot build CVL document.

We are facing one issue in SAPConnect transaction SCOT/SOST. Checking
the List in SOST, there are various fail transmission for FAX. The
error message is
Cannot process message in node (for reason, see long text)
Message no. XS 818
Diagnosis
The message could not be processed due to a technical error in the
node.
System Response
Processing was terminated.
Procedure
The reason is given in the details below.
Cannot build CVL document.
We have checked the SAPNet and search for OSS Note and we did not
find any SAP notes on this particular error message.
Can anyone tell me what is this error "Cannot build CVL document"
We are using RightFax to send the faxes. All RFC destination and ping to RightFax server working fine.
Any help on this will be highly appreciated.
Thanks in advance
Best Regards
CK

Hi
We had this same problem and found that the SQL Database on the RightFax Server was full and could
not extend any further, deleted records from database and problem was solved.
Regards
Prevan

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

How do i solve - cannot access web server - error message when creating a project in 4.5 with PHP

Screenshot of how it looks when i try to show a ms access form inside a iframe:
http://oi58.tinypic.com/2vj4ish.jpg

Check for used DCs failed:Cannot build because used component is broken

Hi All,
when i Build the DC after creation public part getting the below error,
Jun 30, 2008 4:06:41 PM /userOut/Development Component (com.sap.ide.eclipse.component.provider.listener.DevConfListener) [Thread[ModalContext,5,main]] ERROR: eprtest: Build failed for chdp.com/eprtest(MyComponents) in variant "default": Cannot build because used component is broken: chdp.com/labourmanagement( MyComponents)
please help me.
Thanks,
RameshBabu.V

Hi rameshbabu,
Check for the dc chdp.com/labourmanagement , which u r using as dependency for ur dc . That dc is not built properly. Rectify the problem in chdp.com/labourmanagement & then rebuild ur dc, which is using that dc as used dc.It will work properly.
regards
Sumit

[SOLVED]Awesome build process gets stuck

Hi there Archers,
When I try to build the latest version of Awesome it manages to install all the dependencies, but when it comes to actually building awesome it consistently gets stuck on the following line:
Scanning dependencies of target man
[ 57%] Generating manpages/man1/awesome.1.xml
[ 57%] Generating manpages/man1/awesome.1
It stays there indefinitely.
On the AUR-page for this package I got the advice that running makepkg with root privileges might solve the problem, but I don't think this is a proper solution. Posts from Bionic_Apple seem to have some connection to my problem.
With my limited understanding of the make files inside the build directory, I've concluded that it all looks OK, but that doesn't stop it from freezing half-way through the process.
Any ideas on how I could make the install finish that doesn't involve root privileges?
Last edited by linduxed (2012-01-19 00:48:12)

Solved by building as root in a chroot environment.

Exception - Cannot Build Schema (Question)

Friends,
I have a quick question which is driving me crazy. New to SOA, please help.
I defined a variable of type "element" by refering it to an pre-existing xsd. I know the xsd is valid. When I try to use the variable in an assign activiity it does not show the child element and gives error "Exception - Cannot build Schema". While creating variable I refer to element "FetchCustomerInfoResponse".
Following is the xsd for your reference :-
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://www.example.org"
targetNamespace="http://www.example.org"
elementFormDefault="qualified">
<xsd:element name="FetchCustomerInfoResponse">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="XYX_ONT_ACCOUNT_ORDERS">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="XYZ_ONT_ACCOUNT_ORDER" maxOccurs="unbounded">
<xsd:complexType>
<xsd:attribute name="ordered_date" type="xsd:string"/>
<xsd:attribute name="cust_po_number" type="xsd:string"/>
<xsd:attribute name="order_number" type="xsd:integer"/>
<xsd:attribute name="header_id" type="xsd:integer"/>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>

Hi,
using the schema you gave, i was able to create a variable inside the BPEL by referring to the FetchCustomerInfoResponse element, and also i was able to do the copy operation inside the assign activity.
Please try the same again, may be create the variable again...it should work...
Thanks
N

Building i686 under x86_64 error

Have tried arch wiki guide on building i686 under x86_64 but am getting this error
--2014-08-26 17:01:13-- https://aur.archlinux.org/packages/br/broadcom-wl/broadcom-wl.tar.gz
Resolving aur.archlinux.org (aur.archlinux.org)... 5.9.250.164, 2a01:4f8:160:3033::2
Connecting to aur.archlinux.org (aur.archlinux.org)|5.9.250.164|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 2528 (2.5K) [application/x-gzip]
Saving to: ‘STDOUT’
100%[==============================================================================================>] 2,528 --.-K/s in 0s
2014-08-26 17:01:13 (725 MB/s) - written to stdout [2528/2528]
==> Making package: broadcom-wl 6.30.223.248-1 (Tue 26 Aug 17:01:13 BST 2014)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
==> ERROR: Unknown download protocol: http
My makepkg.i686.conf looks like this
CARCH="i686"
CHOST="i686-pc-linux-gnu"
CFLAGS="-m32 -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2"
CXXFLAGS="${CFLAGS}"
BUILDENV=(fakeroot !distcc color !ccache check !sign)
An am using this command
linux32 makepkg -src --config /etc/makepkg.i686.conf
Would very much like to build i686 packages for my laptop under x86_64 (desktop is much faster) not sure what the problem is?

YW. I wrote ccm to minimize the number of commands I needed for building. I find the local repo within the chroot very handy as well. Lemme know how you like it.
EDIT:
Last edited by graysky (2014-08-27 19:00:53)

Cannot build a flow graph with the customized options

Dear JMF-Gurus,
we implemented a DataSource for video capturing that is based on the lti-civil API, so that video capturing on Mac OS X should be possible.
When we try to build the flow graph, we get an jmf-error as described in the following log:
# JMF Version 2.1.1e
## Platform: Mac OS X, ppc, 10.4.9
## Java VM: Apple Computer, Inc., 1.5.0_06
## DataSource created: net.sf.fmj.media.protocol.civil.DataSource@a76306
$$ Profile: instantiation: 30 ms
## Processor created: com.sun.media.processor.unknown.Handler@21ec03
## using DataSource: net.sf.fmj.media.protocol.civil.DataSource@a76306
$$ Profile: parsing: 377 ms
## Getting the supported output formats for:
## RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
## # of nodes visited: 50
## # of formats supported: 38
$$ Profile: getSupportedOutputFormats: 340 ms
## Building flow graph for: civil:?
## Building Track: 0
## Input: RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
## Custom options specified.
## An output format is specified: YUV Video Format: Size = null MaxDataLength = -1 DataType = class [B yuvType = 2 StrideY = -1 StrideUV = -1 OffsetY = -1 OffsetU = -1 OffsetV = -1
## An output content type is specified: RAW
## Here's the completed flow graph:
      com.sun.media.parser.RawBufferParser@a075e6
         connects to: com.sun.media.codec.video.colorspace.JavaRGBToYUV@9c61d3
         format: RGB, 176x144, FrameRate=10.0, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=528
      com.sun.media.codec.video.colorspace.JavaRGBToYUV@9c61d3
         connects to: com.sun.media.multiplexer.RawBufferMux@da7565
         format: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
$$ Profile: graph building: 113 ms
$$ Profile: realize, post graph building: 9 ms
$$ Profile: instantiation: 0 ms
## Processor created: com.sun.media.processor.unknown.Handler@654dec
##   using DataSource: VIC.MonitorCDS@e0c0b6
$$ Profile: parsing: 1 ms
## Getting the supported output formats for:
##   YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
##   # of nodes visited: 48
##   # of formats supported: 37
$$ Profile: getSupportedOutputFormats: 97 ms
## Building flow graph for: null
## Building Track: 0
## Input: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
## Custom options specified.
## An output format is specified: H263P/RTP, 176x144, FrameRate=10.0
## An output content type is specified: RAW/RTP
XX Failed to realize: com.sun.media.ProcessEngine@8393ef
XX   Cannot build a flow graph with the customized options:
XX     Unable to transcode format: YUV Video Format: Size = java.awt.Dimension[width=176,height=144] MaxDataLength = 38016 DataType = class [B yuvType = 2 StrideY = 176 StrideUV = 88 OffsetY = 0 OffsetU = 25344 OffsetV = 31680
XX       to: H263P/RTP, 176x144, FrameRate=10.0
XX       outputting to: RAW/RTP
XX Error: Unable to realize com.sun.media.ProcessEngine@8393ef
## com.sun.media.BasicFilterModule@31477b: input format changed: RGB, 640x480, 24-bit, Masks=3:2:1, PixelStride=3, LineStride=1920
We guess that the problem was first the wrong input format (wrong video-size or wrong framerate) but this has been changed to the correct format.
The flow graph looks like correct, but it doesn't work anyway.
What does the last line in the log means, and are there any information were the problem good be located?

How were you even able to accomplish that? In my classpath I have fmj-nojmf.jar, jmf.jar and lti-civil.jar but I keep on getting this in my log.
# JMF Version 2.1.1e
## Platform: Mac OS X, i386, 10.5.4
## Java VM: Apple Inc., 1.5.0_13
## DataSource created: com.sun.media.protocol.javasound.DataSource@f98d58
I can't get it to find the civil datasource in fmj-nojmf.jar.

Cannot build multifile project

Hello All,
I am new to Java, and a bit lost. I've done a couple of single file programs on JBuilder, and those worked OK. Now I have a larger school project with numerous classes in numerous files. I have all the files in the same folder (the project folder). When I try to build the project, the references to classes in other files are not recognized. I am running on Windows XP, and have added the paths to the bin folders in jdk1.5 and jre1.5 in the "Path" variable of environment variables. I have also added ".;" on someone's recommendation. However, I still cannot build this project, even though I know it is a working one (tested on another system.) Any help would be appreciated. Thank you.

Java files can be structured in packages.
If you find as first occurrence:
package org.mywork.gui;then you should place the file in a subdirectory org/mywork/gui (3 directories) of your sources.
Compile from the top (the directory in which org is placed.
The package statement is optional, but it is good style and very convenient to use packages.
I am a bit late with this answer, so you'll probably found out already.

[SOLVED] Cannot build Gnash on x86_64

Similar Messages

Maybe you are looking for