[solved]Cannot detect SD card after update

Hello all,
I frequently mount an SD card using:
$ sudo mount -t vfat -o uid=me,gid=users /dev/sdd1 /media/SD
However, after my latest pacman -Syu, my SD card isn't being detected by fdisk -l.
I tried hooking up an external USB SD card reader, but the result was exactly the same.
I'm terribly sorry that I don't have any idea what broke it (udisks perhaps?)
I'm using 2.6.33-ARCH, and Openbox. The SD card is a Kingston 4 GB SD HC that has always worked in the past and can still be detected on my uIEC/SD device.
Does anybody know how I can fix this?
EDIT: Today's update seems to have fixed the problem (ntfs-3g perhaps?).
Last edited by neilward (2010-04-12 00:44:42)

Similar Messages

My 17" MacBook Pro cannot detect express card after the OS Mavericks update

Hi all, after I installed the update yesterday, I find out that my MacBook Pro no longer detects the PCI express card which I was able to use in OS Mountain lion, and I can't see it in both disk utility and recovery mode. Any suggestions? Thank you for reading this.

Seperde,
please review all of your installed third-party software to ensure that they’re compatible with Mavericks.

Cannot backup and sync after updated iTunes

Cannot backup and sync after updated iTunes. Have tried to hard reset iPhone (all data lost- sad) and reinstalled iTunes. Still cannot work.

It sounds like you bough the song only, not the song and the ringtone.
Ringtones via itunes are available in the U.S. only.
In the U.S. to make a ringtone you:
Buy the song with a bell - 99 cents
Find the song in your library and click the bell
This bring up the editor.
You edit the song to the portion you want.
Then click buy to purchase the ringtone - another 99 cents.
Then it shows up in ringtones and you can sync.
As I said, this method of creating ringtones is available in the U.S. only.
There are, however, many ways to make ringtones:
http://www.iphoneatlas.com/2008/01/02/guide-the-many-methods-for-using-custom-ip hone-ringtones

TS3103 I have aol and cannot acesss my email after updating to osx 10.6. the help says that I need mail 4.6. I have 4.5. How do I get the correct version?

Ihave aol and cannot acesss my email after updating to osx 10.6. the help says that I need mail 4.6. I have 4.5. How do I get the correct version?

Run all software updates.
http://support.apple.com/kb/TS4424

HT1386 i cannot activate my iphone after update

i cannot activate my iphone after update please help

you can activate your phone by contacting your phone carrier.

HT4972 Why won't my iPhone 4 recognize my sim card after update?

Why won't my iPhone 4 recognize my sim card after update?
I updated my iPhone 4 over wifi and it went through the process fine, until it switched back on and now refusese to recognize my sim card!
Any ideas?

Usually this means the phone was previously jailbroken or hacked to unlock it from the carrier it was locked to, and the update re-locked it to that carrier.

TS1368 cannot connect itune store after update ios 6

cannot connect itune store after update ios 6

Hello Dannard Lee,
It sounds like you aren't able to connect to the iTunes Store, or update your device to iOS 8. I would use the troubleshooting from the following article to help troubleshoot the issue, and it seems to be they may be related to one another:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Thank you for using Apple Support Communities.
Regards,
Sterling

Cannot install Touch ID after update 8.1.3 in iPhone 5s.

Cannot install Touch ID after update 8.1.3 in iPhone 5s. In trying to install unlocking my phone is refused, as is allowing access to iTunes and App Store. Before updating I used Touch ID without any problem.

Restore iPhone with iTunes on computer. If after the computer Restore there are still problems, iPhone 5S has Warranty, make Genius reservation or set up service and take or send iPhone to Apple for resolution.

My iphone 4s cannot be turned on after updated to ios 7. can anyone tell me how to solve this

my iphone cannot be turned on after a week i updated it to ios 7. I have tried many solution to turned it on but none of them works. Now it only appear the apple logo on my screen since 5 hours ago. Can anyone suggest me the best solution

Hello Anis Squared,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Cannot Detect Video card (Radeon 6750m)

Dear sir,
I would like to know why my laptop cannot detect my video card (Radeon 6750m). It only shows the built in graphic card intel. I already try to use system restore and reset to original factory mode. It will appear but after updating my drivers and reboot my laptop. My laptop cannot detect again the video card.
Please help me resolve this problem,
for you reference
http://tinypic.com/r/2it67ex/8
This question was solved.
View Solution.

You will have to enable the Radeon HD adapter by using the Catalyst Control Center.
Once you do that the adapter will appear in the Device manager.
If you are using the Intel HD graphics, only the Intel graphics will be seen in the Device Manager.
I know that may sound strange, but it is one of the pecularities of having a switchable graphics capable notebook.
The following URL goes to an overview of switchable graphics. Take a few minutes and read it. It should help make understanding it simpler.
http://support.hp.com/us-en/product/HP-Pavilion-dv4-Entertainment-Notebook-PC-series/5048648/model/5...
Do not instal the Intel graphics driver seperately!
Doing that breaks the switchable graphics feature.
Only install the HP ADM ATI graphics softpaq. It will install both drivers automatically and let you use the switchable graphics featrure og your notebook.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

[SOLVED]Cannot detect battery or power supply before a power event

The system cannot detect my battery (or AC adapter) since boot, and before a power event
like the following: (the acpi command provides no output)
$ acpi
After I do one of the below
1. plug in AC adapter
2. remove AC adapter
3. cover my screen and uncover my screen
4. drain my battery to low power (probably 15% or 20%)
The system can detect my battery/AC
like the following:
$ acpi
Battery 0: Charging, 61%, 01:18:24 until charged
$ acpi
Battery 0: Discharging, 61%, 05:17:15 remaining
Is this a bug or solved issue?
or should I update my bios?
NOTE: This issue does not exist in Windows (8.1), on the same machine
The laptop is Dell Inspiron 14 7437, without touchscreen
Last edited by dvw10984 (2014-07-21 20:07:37)

I'm glad I could help!
To complete the answer on whether it's a bug or not, it has to do with your BIOS expecting Windows rather than Linux. So you need to tell it that Linux is running and without the parameter, the kernel will return false if asked whether Linux is running. This causes some features to just simply not work.
If adding that parameter makes the screen's backlight to not work, you may want to add "acpi_backlight=vendor" to it also, but it actually caused my computer to not boot and seemed to not make a difference (probably should have mentioned that).
Last edited by markzz (2014-07-22 04:17:18)

IPhone 3GS can not detect SIM Card after upgraded to iOS 6.0.1

Guys I really need your advice please...
I upgraded my iPhone 3GS 32GB from iOS 5.1.1 to 6.0.1 a couple weeks ago and since then it can not detect the my SIM Card ever. Before it's been upgraded, the phone was working just fine, but now it's just like a gameboy to me. I've been trying to find solution and some stores want me too pay quite amount of money to fix it but I refused.
By the way, it has been jailbroken with RedSnow, tethered of course... and all the features are working perfectly, the WiFi is working, syncing is working, Bluetooth is working, downloading apps from App Store is okay, but only Mail and Safari won't work. I haven't got a chance to go to Apple Service Center to fix it yet, but the store I went said that Apple may say the same.
Thanks in advance.
ps to Admin: I'm a newbie, so if I posted this in the wrong room please forgive me.

rzulfikar wrote:
Thanks Chris for your solution.
But just for you know that I bought Apple to get the 'after service', they should've warn the users not to upgrade to a higher OS if it can caused the phone 'dead'. Mine was totally unusable when it's just been upgraded. It stayed in the recovery mode and couldn't be restored. So I brought it to the nearest store and they did that to me, and eventually the phone is working, only it cannot detect my SIM Card...
The problem is not about upgrading an iPhone to a newer version of iOS. Your problem was upgrading a hacked phone, one of the well known consequences of which is re-locking and/or bricking the entire device when restoring in iTunes. You chose to hack your phones firmware and operating system, so you must accept the consequences of going outside the bounds of normal use that Apple prescribes and supports.
Had you not hacked it in the first place, you likely would have never had a problem, and if you had, Apple would have offered support to deal with it. Your choice, your decision, your consequences.

Wont detect sd card after windows 8 upgrade

Hi
I need help. My HP Pavilion M7 1015dx wont read/detect any SD card after I upgraded to Windows 8.

What is the installed CPU?
Have you tried running the HP Support Assistant Tune-up utility?
Go into the Device Manager to see what the manufacturer of the External media card reader is.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Iphone 3GS cannot detect SIM card

Hi My iphone 3GS cannot detect the SIM card.
The phone shows full bar for service provider but 3G unable. It cannot receive incoming calls and make outgoing calls.

I am assuming you updated to version 5.1.1, not 5.0.1 since no legitimate version of 5.0.1 is available.
Where is this iPhone from and what means did you use to unlock it?

Cannot reply to email after update to 10.8.4

Recently - I believe after updating to 10.8.4 - Apple Mail 6.5 will no longer send replies or forwards. After troubleshooting different scenarios, it seems to be related to the original message text being included in the reply/forward. I need to include all previous message text in my emails for audit purposes.
Any suggestions/fixes would be greatly appreciated.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -f -a TextEdit
Step 4
ls -A /e*/{cr,la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -f -a TextEdit
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

[solved]Cannot detect SD card after update

Similar Messages

Maybe you are looking for