[Solved] Cannot see interface in ShootMania Storm

Hi,
I am trying to get ShootMania Storm working on my Arch x86_64.
I got it to install and start with wine, but after that it just shows an empty background where an interface to log in etc. should be.
I get sounds when mousing over where the menu points would be, but they are not rendered and everytime I do it, I get a lot of
fixme:d3d:resource_check_usage Unhandled usage flags 0x8.
in the console.
Any suggestions?
Edit:
Nevermind, I tried it with xf86-video-ati first; now using catalyst and it works (shame, I really wanted to avoid catalyst but meh).
Last edited by lorizean (2012-10-17 13:02:37)

Hi Gökhan,
if you dont can choose the IF mapping in the IF Determination then you configured assumedly sending Outboud IF and receiving Inbound IF wrong. Plz check your configuration again. I found that "error" as a good help to avoid wrong configurations.
Regards,
Udo

Similar Messages

SOLVED: Cannot see certain characters

I'm using Firefox 4.0b9 (although I don't think this is the issue) and I have trouble seeing some characters. Most often it's on my bank's website. They show up as black diamonds with question marks in it. The other issue I have is sometimes I get problems with glyphs (don't know what to call them). It's basically a black outline square that looks like this:
|0 0|
|7 F|
Does my ASCII art impress you?
Anyway, I have my rc.conf look like this:
LOCALE="en_US.UTF-8"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
Not sure what's causing this issue. Do I need to install more fonts? Which ones?
Last edited by TFB (2011-01-23 20:34:41)

DKnight wrote:Have you tried selecting different encodings from "View->Character Encoding" inside Firefox? maybe try autodetection?
It doesn't seem to help here.
Chromium renders it right with the default settings. Using (seemingly) the same settings in firefox doesn't work.
I don't think it's a big deal though.
If anybody wants to give it a shot, save this:
<html>
<head>
<meta http-equiv='Content-Type' content='text/html; charset=UTF-8' />
<title>Title</title>
</head>
<body>
Can you see me:  ?
</body>
</html>
as something.html and open it in firefox. It should render as
Can you see me: ?
not
Can you see me: ?
Last edited by karol (2011-01-23 20:16:32)

Mac cannot see my audio interface

Hi,
Please help!! I have recently purchased logic studio. In trying to set it up I keep on hitting a brick wall. I have connected my midi controller into my Edirol UA25 and connected the audio capture unit to my Macbook as shown. In the Midi/Audio settings my Mac cannot see the midi input even though Iam able to select the UA25 as an input and output device.
I've been searching the web and logic manuals for hours now!
Any answers would be massively appreciated.
Will

Hi jeb70. Hsve you selected the edirol in mac system preferences as preferred audio device? Also try unplugging the cable from the interface to the mac and replugging once logic is running. Also check if the track in logic has edirol inputs selected as that track's inputs. Hope this helps. Scorpii.

I do not see the user interface for the Logic software instruments. I can hear them play through my midi keyboard but I cannot see them to adjust parameters. Please advise.

I do not see the user interface for the Logic Pro software instruments. I can hear them play through my midi keyboard but cannot see them to adjust the parameters. Please advise.

Couple of things - you can open the interface for any instrument or plug-in by double-clicking its insert slot on the channel strip. You can configure Logic to automatically open the interface for a plug-in when you first instantiate it in the preferences. Go to Logic Pro > Preferences > Display > Mixer, and check the box for "Open plug-in window on insertion".

I cannot see "iPhone" in the list of interfaces when trying to configure it in the network options. Do you know how to fix it ?

I cannot see "iPhone" in the list of interfaces when trying to configure it in the network options. Do you know how to fix it ?

When I go to SYSTEM PREFERENCES > NETWORK i don't see "iPhone" in the list of Services (AirPort, Ethernet, etc.)
If I try to add a new service (by clicking + ) iPhone doesn't show up in the list of "interfaces" available.
That sounds a bit weird because iTunes can normally sync-up, backup and recover my iPhone.By the way "Personal Hotspot" is already set.

TS1702 I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

I did an updating and now I cannot see the photos of my contacts in whatsapp, what I can I do to solve this issue?

Click the Bookmarks icon in the Safari toolbar.
On the right hover your cursor just above the line where you see Bookmark and Address. When you see the small white hand drag up or down as needed to reveal your Bookmarks.
edit by cs

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

My 2012 Mini OS 10.7.5 cannot see the Ethernet connection to my Actiontec GT701 WG. The Network Preferences says "cable unplugged". The WiFi connection is working fine. Please Thank You

Never mind, problem solved. When I retunred to the Network tab the message had changed to "connected, no IP address" so I got that from the WiFi tab and configured the Ethernet manually. Have a nice day @:-)#

HP Envy 4500 - cannot see from my IPAD 4 gen, does not airprint

Dear all,
I hope you can help me. I cannot see my printer envy4500 from my IPAD 4 gen (IOS7.0.4). I've tried all, following also your instruction (reterived in this forum)to set a manual IP but it does not solve the problem. My router is wireless Belkin Surf N300 and it's on line, the printer is also on line in the same wireless network as also the IPAD. Only if I use the direct wireless I can see the printer, otherwise not. If I use the AiO remote APP I cannot see the printer when it's connected to the wireless network, I can only see when I use direct wireless. If I enter the printer IP address from browser when I am connected to the wireless network, I can see all data from printer, I can see also my router typing it's address.
Can some one help me?
Thanks

Hi zagar,
Welcome to the HP Support Forums. I understand that your iPad is not finding the printer unless it is connect by Wireless Direct.
I have included a link to another thread here on the forum addressing a similar issue. As you read through the thread you will find several steps to try. Please let me know if none of the steps correct the issue.
HP Support Forums thread
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/airprint-from-iphone...
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HT1418 I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar. Only repeated items (birthdays, anniversaries, etc.) are visible. Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?

I have iPod4 and cannot see day-to-day appointments, etc on PC Outlook calendar. Only repeated items (birthdays, anniversaries, etc.) are visible. Where is the rest of my data and how do I restore it to the only calendar I have in Outlook?
Thanks

Hello Schimi. The Time Capsule is a kind of product that offer you two possibility:
- To use the TC as a router or as an external HD.
The difference between WPA and WPA 2 are:
- They are two kinds of internet connection.
WPA uses dynamic key encryption , which means that the key is constantly changing and makes the invasion of a wireless network more difficult than WEP . WPA is considered one of the highest levels of wireless security for your network and is recommended if your devices support this kind of encryption . Newer routers offer WPA2 security . WPA2 is compatible with WPA , but offers higher security level . In fact, it meets the high standards of many government agencies . If the router and computer support WPA2 , this should be your choice.
If you need any help or if you find some difficult setting up it you can contact Apple Support.
I am sure that they can help you with that.
I am sory for the delay. I holpe that you solve your issue.

In the forum I CANNOT SEE the "Accept as solution" button...... :(

In the forum threads I simply Cannot see the "Accept as Solution" button FOR THE LIFE OF ME.........
- Can you help me locate it,please ?
This question was solved.
View Solution.

Hi,
In looking at the posts you participated in, it appears that the thread was started by another user. You can only see the “Accept as Solution” button on thread started by you.
Hope this helps.
Regards,
Valerie
Moderator

Cannot see PI receiver(Proxy) adapter - advanced adapter specific message

Hello Friends,
I cannot see adapter specific message attributes in receiver adapter XI (abap proxy) for enabling. I want to use these properties for getting a file name dynamically in a receiver structure.
I had seen a blog by Mr.Michal but that gives details for file to file. Here my target is abap proxy so I cannot see advance tab properties in XI adapter used communication channel.
Clearly my interface is file to ecc (using proxy), where i will have to read a file name which my interface picks and has to update in ecc.
I have enabled the sender side File adapter - ASMessage attributes but am not able to find the attributes in receiver side. Does it make any diffrence if am not enable the attributes at receiver adapter.
Thanks very much.

Swarna,
in your scenario in order to have the file name updated on ecc, you must:
1. Set the ASMA properties on sender channel
2. Read the property in mapping and put the value in a custom field on the proxy structure. Create an UD like this:
UD
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String onixdataset = conf.get(key);
--- END UD
3. Manage the filename in the proxy class with your requirements
Regards,
Andrea

Latest version iMovie: cannot see clips in project OR event browser, but they are there in both libraries! So cannot create/edit/publish ANYTHING.

HI All. I have been having a HECK of a time with iMovie 11!!! Converted a bunch of video to .mov format, imported into iMovie, and created a project. No problem. Finalized, and published to iTunes, no problem. Saves extra copies. No Problem. SO ... I want to create another project, and follow the instructions RELIGIOUSLY. I can import the video files into the event library, and can drag them into a newly created project, but I CANNOT see the clips in the browser pane for events or library! When I click the playhead in either the event library or the project library (where the clips are edited - supposedly), they play (ie, i hear the audio just fine) ... but NO real-time playback. ALSO - the video no longer plays for the already completed project when I click the playhead - same deal - not in the project browser, not in the event browser. The playhead runs, but as it moves from thumbnail to thumbnail, each one goes black, and no video plays in real time in the other pane. I closed out of iMovie, did a restart, repaired permissions. No change. I get no error messages, and can find no way to 'reassociate' a project with a set of clips (like one can do in software like Illustrator etc).HELP!!!

I've spent 3 hours in Apple Covent Garden trying to have this fixed. Most of those were spent doing something to content in iPhoto. It didn't work. Then I left them my computer to reinstall software (Snow Leopard and iMovie) which they said they could do better than me and my discs. But I got back a computer with a new user profile and no files. When I used Time Machine to restore my files to my old profile the problem was just as before except now I've lost a week worth of photos, despite the Time Machine file having been saved just hours before I gave my Mac to the muppets in the Apple store.
If it's any clue, the other I get is that iMovie searches for four missing movie files when it tries to load. I've tried solving this by creating new files and changing the names to match the ones that are missing (as I read elsewhere in the community works) but it doesn't work.
So I've wasted hours, a day of Apple having my computer and no one replies to my thread here. What's to be done? Do I give up on iMovie and buy Final Cut pro? And how can I get my week's worth of photos back that have disappeared from TimeMachine, even though everything else in the restoration (e.g. mail and Firefox windows) are completely up to date?

My picture files open up off center so I cannot see all of the bottom part of the picture.

Hi,
My picture files open up off center so I cannot see all of the bottom part of the picture. The ruler across the top read "0" to 13.5". Down the left side of the picture the ruler reads 3", 2",1", 0, 1", 2",3" etc. This leaves a three inch empty space at the top of my viewing area and I lose three inches of the bottom of my picture. I cannot figure out how to adjust this. I have tried the screen modes and they do not fix my problem. What can I do to solve this problem?

Please provide sensible details about your platform, exact version of your OS, exact version of Photoshop, complete details baout your setup, hardware details, monitor resolution, etc.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Why I cannot see the progress bar whenever I download my apps directly from my App Store ?

Whenever I install an app, I cannot see the app's icon on the home screen and then when I proceed into the home page, the apps will not be installed unless I stay into the App Store and wait till the circle on the top of the screen stop turning. It is really very inconvenient. I'm using iPhone 4S. Anyone knows the solution? And I'm can't see the progress bar showing whether its downloading. I'm using IOS 6. And I've got another issue. Why whenever I want to reinstall the youtube they would say its free. When I press the 'free' it will go into the 'install' and then when I press the 'install', it would go back to 'free' and because of that I'm unable to download youtube. It's only youtube I'm able to install other apps. But ya, I cannot see the progress bar. Help anyone?

Actually, the app is there, and it asks to PAY AGAIN, that was the issue, but I have just solved the problem using your first advice, as I tried a few times with different names in my account.
For example, you told me to use the same ID...
I have a ONE account, but sometimes I sign in as [email protected] and sometimes I sign in as [email protected] and sometimes I sign in as [email protected] and that made all the difference, as I tried them all and finally with [email protected] worked and gave me the opportunity to download again.
Thanks a lot for the tip.
Luiz

Cannot see XI receiver CC in monitoring

Hi,
I cannot see XI receiver CC on the communication channel monitoring. I understand it doesnt reside on ABAP stack and should be listed in the list of CC.
All cache refreshes are done FYI.
Venkat.

Hi Venkat
refer the similar thread , which is solved
Communication Channel Monitoring Error
Re: Comm channel missing in comm channel monitoring
Communication Channel Monitoring Error
Regards
Abhishek

[Solved] Cannot see interface in ShootMania Storm

Similar Messages

Maybe you are looking for