[Solved] Compiling pommed for MacBook pro 13inch (June 2009 edition)

Hi, I'm trying to get pommed to run on my new MBP 13inch, but whenever I try to run the daemon it fails without any error message. Also when I run the pommed command itself I don't get any output. I tried to run with the standard mactel config and without any config.
I don't know which logs to check but dmesg doesn't show me anything.
Also I tried compiling pommed with the MacBook_Aluminum wiki tip by changing to 5,5, but still the same: no output.
Currently I'm on arch64, thanks in advance.
Last edited by jryarch (2009-07-25 19:38:49)

Hello Jryarch!
And this thread too ?
http://bbs.archlinux.org/viewtopic.php?pid=444664
What does it mean no output ? Do you get back the shell prompt without any output or it hangs on forever in an endless loop or what ?
Maybe this one is relevant too:
http://bbs.archlinux.org/viewtopic.php?id=65972
http://wiki.archlinux.org/index.php/MacBook
And maybe you can follow the aur-general thread for this matter:
http://www.archlinux.org/pipermail/aur- … 01271.html
Hope some of them help.

Similar Messages

What's the power Adapter for Macbook pro 13inch Mid 2012

What's the power Adapter for Macbook pro 13inch Mid 2012 with core i-7, 2.9ghz, 8Gb ram?
AFAIK it should be a 60wat Megasafe power adapter.
But mine shipped with a 45Watt Megasafe. I got it as a Gift from my friend.
Thanks in Advance.

mmaumio wrote:
60W MagSafe power adapter with "L" style connector
This should be my Adapter right?
Yes.
There is a drawback in addition to taking a longer time to charge up your MBP. In unusual instances when using your MBP with power adapter attached, and running a very heavy load on the CPU/GPU, the MBP will require additional electrical resources in addition to what the power adapter can provide. It will then draw upon the battery. What this means is that using a 45 watt adapter, these conditions are more likely to occur.
Using a 45 watt adapter should not harm your MBP as such.
Ciao.

Macbook pro 13inch mid 2009 not charging X on battery

Hello
I need some help regarding my macbook pro 13inch mid 2006. My battery will not charge it has a X over the batter logo. My laptop will only stay on if it is plugged in, if i unplug the charger it will die. Ive attached my battery info which does not seem like it helps.
PLEASE HELP ME!!!

my charger also gives the green light as if it is charging

General stuff for macbook pro 13inch 2014

hi
recently brought a macbook pro from curries in blackburn lancashire and i thought the battery life is ment to be like 9 hours but oh no its not even so its took me few days to do software updates cos the battery life is like 4 hours n 20 mins so im i going wrong sum where ??
and also trying to download handbreak for the macbook pro n it wont let me even so it has done in past for my desk top mac
so is there any where im going wrong pls ??
cheers
Andrew from Darwen Lancashire

Please read the warranty paperwork that came w/your computer.
You have 14 days to return the computer w/no questions asked.
You have 90 days of FREE phone tech support on top of your standard 1 year warranty unless you also purchased AppleCare which gives you an additional 2 years of coverage plus FREE phone support.
Strongly suggest that you take FULL advantage of the above before it runs out. Let Apple deal w/the problems & your concerns. It's what you paid them to do.

Where do I change the first name of the city I put in the address field of my MacBook Pro in June 2009?

When I finally got my MacBook Pro 15 in June 2009 I tore it open and began hastily setting it up. In my haste, I accidently chose a town or zipcode town 20 miles north of me as to where I live. Unfortunately, when there are specials in that area, or something is happening that I might otherwise be interested in...I am not because a 20 mile drive here seems like an eternity. Can someone tell me how to change the city in the original set-up and where it is stored so that I might change it to reflect my true city.
Thank you,
Jim

You can see number of charging cycles in System Profiler , under Power.
In regards to your battery/charger issues one thing - try to switch your computer off, take the battery out, and hold power button for 5 (10, just for a sake of it seconds.
Then put battery back in, and try to charge it/power it up. It's amazing how many issues can this solve...
Let us know!

Trackpad issues on Macbook Pro, new June 2009

I have been unable to resolve a trackpad issue that began this afternoon on my Macbook Pro. The computer was new in June. I was playing an online computer game, and it seemed that drag was locked on even though I hadn't changed any settings. Movements of the mouse dragged the window. The drag would not release with 1 click, 2 finger click etc. When I tried typing, the letters selected and replaced as soon as I typed new ones. After several restarts with the same behavior occurring, I reloaded the Snow Leopard 10.6 OS. I originally installed it about 2 weeks ago, and it has been working fine until now. After the reinstallation, the trackpad will not register most clicks of the trackpad. It will register taps, but it refuses to let the user click and drag. I have Microsoft Vista installed in Boot Camp and the trackpad is operating with the same glitches on boot camp. Clicks of the trackpad do not register most of the time. If they do, I have to click very hard, and even then it doesn't always work.

Be paticent.
You can try a SMC reset:
http://support.apple.com/kb/HT3964
Follow the directions that apply to your machine regarding battery, remove or don't remove yourself.
Try with a USB mouse in the mean time.

When Mac Pro pro stops having wireless and says no hardware installed what does that mean. I try to turn it on and it doesn't work. Does that mean it dies. IT is a macbook pro from June 2009

when Macbook pro- sudeenly stops working on wireless and says there is no hardware installed- what does that mean. I tried to click turn wirless on and it says no hardware installed.
Thanks

Reset PRAM. http://support.apple.com/kb/PH4405
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

Macbook pro 13" june 2009 fan rpm remains at 2000 rpm when temp is 85c

Hi,
I've just bought a new macbook pro 13 inch and updated software vis software update.
I've noticed that the fan rpm went to 2700 rpm on every boot but
after a few minutes it goes down to 2000 no matter the temperature is
I'm using iStatPro to see the temp and fan
I've tried open youtube videos to raise the temperature to 71 but the fan remains the same at 2000
Please advise.
Thank you

Thank you for the info
I've just tried resetting the SMC but no luck.
since this is my first mac computer so I'm not sure if this is normal or not
after an investigation with different scenarios of work load I found that
room temp : 27c
cold boot : cpu 45c
: fan 2000 / 2700 rpm
warm boot : cpu 58c
: fan 2000 / 2700 rpm
running parallels
with windows 7
and visual studio : cpu 75c
: fan 2000 rpm
The fan did kick in to 3500 rpm once the temp is 85c
I'm not sure if this is normal or not since my Dell M1330 xps
which running vista and visual studio shows only
cpu: 58c
fan: 3000rpm
Thank you
I'm not thinking about using SMC fan control to set the default to 3000 rpm
and use it only when I work on Windows but not sure if the program will damage
my new baby or not
Thank you

Ocz agility 3 240gb vs crucial m4 256gb for macbook pro 13 mid 2009?

Sorry about the randomness of the question I am sorta noob in this forum.
But I need help selecting the new ssd drive for my macbook pro. Currently I am using the 500gb seagate momentus xt which is ABSOLUTELY HORRIBLE!! The osx lion crashes once in every 3minutes and generally the system is unstable. However, When I run windows 7 on the machine via bootcamp, everything is copasetic and smooth. I updated my hdd firmware and tried everything under the sun to fix the drive but it was hopeless.
So now I am looking to get a new mid range 250gb ish ssd drive that wont crash on my machine. My mac in only capable of sata 2 so it wont get the max speed in any way. What I really want is to be able to run osx lion without those horrible freezes and crashes. I only use this machine for Word processing, iphoto, itunes and web browsing. But I want to do all of that with superfast speed. The seagate hybrid ssd is faster then normal hdd but it is not even close to being amazing in speed. So which one of those 2 ssds would be better for my macbookpro? If you have any different suggestions that's within that $300-$400 price range, please let me know.
Thank you for reading.

Those are the correct RAM modules for you model (the 13" being the only mid-2010 model that can use 16GB of RAM - but those modules will surely get you to 8GB!).
Am I right in assuming that you want to purchase a SSD to be installed in your boot bay and that you want to install the Samsung drive in the optical bay? Unfortunately, your link points to a rather sparse description of the drive - I see the 2.5" but I don't see the depth (which should be 7-9.5mm and not a mm more).
I'm just unclear about whether you're looking for a new spinning drive as well as a SSD and whether or not the drive will fit (just a minute - OK, found some more info - the Samsung drive is 9.5mm so it should sit just fine in your machine: do you still want a SSD?).
Note that the 2TB Samsung probably won't speed things up much - it's a 5400rpm drive: if you could use a 1TB drive, you could get a faster, 7200rpm drive.
Clinton
MacBook Pro (15” Late 2011), OS X 10.??, 16GB Crucial RAM, 960GB M500 Crucial SSD, 27” Apple Thunderbolt Display

Recommended specs for MacBook Pro - beginner photo/video editing purposes

I'm shopping for my first Mac and was hoping to get some advice on the specs I would want for running software to edit photos and video. I'm a beginner/non-professional but hoping to develop some skills.
I was thinking 8 GB RAM, a mid-sized solid state drive, and a quad core i5 or i7 processor?
Any advice would be much appreciated. Thank you!

I think you've nailed them already. Buy and enjoy.

Macbook Pro 15" - June 2009 stuck @ 98%

Hi just got my new machine and it is stuck at 98% on a full charge
I have recycled the battery letting it drain and recharge and no luck
Anybody has any suggestions ?

Hi celtawil: Does the Apple article below help with your issue?
http://support.apple.com/kb/TS1909
Stedman

Reformatting to factory settings,13" MB Pro, Mid June 2009 Edition

I have had this MB Pro for 5 years. Still runs great but I bought the new 13" Retina model. I am looking to sell my old one but want to erase everything on HD first. I have erased the HD. (I hope). But when it asks me to reinstall OS (Yosemite), they want my Apple ID. My purpose of erasing the HD is NOT to have any of my info in the Mac. When I bought the Mac 5 years ago, I had Snow Leopard. I still have the 3 DVD's it came with.
- Applications Install DVD
- Mac OS X Install DVD
- Mac OS X Snow Leopard CPU Drop-in DVD
Should I have used these disk to reformat my HD?
Help me out please. Thanks.

Click here and follow the instructions. When you reach step 5, insert the Mac OS X Install DVD, restart with the C or Option key held down, use the Disk Utility to erase the internal drive, and install a fresh OS. Include all of them with the computer.
(120748)

May Macbook pro vs June

Hey, is there any difference in a macbook pro from May 2009 vs. one from June? I don't keep up with new releases so I'm not too certain.

I think what I'm going to do is refer you to an articles and a bench mark test that go over the differences.
http://www.engadget.com/2009/06/18/macbook-pro-early-2009-in-depth-impressions/
http://www.macworld.com/article/141185/2009/06/15inchmacbookpro.html
http://www.slashgear.com/macbook-pros-13-inch-and-15-inch-mid-2009-review-264812 0/
http://www.primatelabs.ca/blog/2009/06/macbook-pro-benchmarks-june-2009/

Macbook Pro 13 mid 2009 Wifi reads "No hardware installed"

After installing a new screen for Macbook Pro 13 mid 2009 my Wifi reads "No hardware installed" what should I do?

Check out the threads in the "More Like This" section on the right side of this answer.
If this does not help, contact Apple.
Best.

Hello , please tell me whats the price of a screen and casing for a macbook pro 13inch.ty

hello , please tell me whats the price of a screen and casing for a macbook pro 13inch.ty

ds store's opinion will be right in some, but not all cases.
That largely depends on eactly which year and MacBook Pro (e.g., 5,1 ) model you are talking about, as well as whether you are rather "handy" and can do the swap yourself.
On older Macs, used complete screens are available on the secondary from machines that have died. Step-by-step photo-illustrated guides are also available for sources like ifixit.com. [Their motivation for providing these guides for free is that some readers will buy their parts to make the repairs themselves.]
Newer Macs may be valuable enough that having Apple fix them may be cost-effective. A free appointment at the genius Bar (with no obligation to proceed with ANY repairs) can get you a quote to consider.

[Solved] Compiling pommed for MacBook pro 13inch (June 2009 edition)

Similar Messages

Maybe you are looking for