[SOLVED]Compiz Fusion doesn't start!

Hello,
After an upgrade Compiz Fusion doesn't start. Normally I start Compiz Fusion with the command:
fusion-icon
But now it gives on a terminal the following output:
fusion-icon
* Detected Session: gnome
* execution of "which glxinfo" failed
* Error: glxinfo not installed!
I searched with Yaourt on "glxinfo", but there is no package called "glxinfo".
Could someone help?
Jozef
Last edited by jozef00 (2009-05-11 16:01:39)

Hello,
The problem is solved. Instead of
fusion-icon
I use
compiz-manager
Thanks to xaiviax for his reply.
Jozef

Similar Messages

  • [SOLVED] Gnome + xf86-video-ati = Compiz-fusion can't start wo f-i

    I know this is not a new issue but... let's try again.
    The title is pretty much the situation. I reinstalled the whole system recently and installed Catalyst which worked good except for a delay on maximizing/resizing windows. Yesterday I saw the new about Catalyst going to AUR and all that stuff so I decided to switch to open source drivers. They work pretty good but the wiki-way to start compiz without fusion-icon which used to work with catalyst does not work anymore.
    $ cat /etc/X11/xorg.conf
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Files"
    EndSection
    Section "Module"
    Load "synaptics"
    Load "glx"
    Load "dri"
    Load "drm"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "radeon"
    BusID "PCI:1:0:0"
    Option "XAANoOffscreenPixmaps" "true" #needed for aiglx
    Option "ColorTiling" "on"
    Option "AccelMethod" "EXA"
    Option "EnablePageFlip" "on"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x800"
    EndSubSection
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    $ cat /usr/share/applications/compiz.desktop
    [Desktop Entry]
    Type=Application
    Encoding=UTF-8
    Name=Compiz
    Exec=compiz ccp
    NoDisplay=true
    # name of loadable control center module
    X-GNOME-WMSettingsModule=compiz
    # name we put on the WM spec check window
    X-GNOME-WMName=Compiz
    $ gconftool-2 --get /desktop/gnome/session/required_components/windowmanager
    compiz
    $ fusion-icon
    * Detected Session: gnome
    * Searching for installed applications...
    * No GLX_EXT_texture_from_pixmap with direct rendering context
    ... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1
    * Using the GTK Interface
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    * Starting Compiz
    ... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp --indirect-rendering
    /usr/lib/python2.6/site-packages/FusionIcon/interface_gtk/main.py:214: GtkWarning: Theme directory 24x24/stock of theme hydroxygenPablerkasMod has no size field
    gtk.main()
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Xlib: extension "Generic Event Extension" missing on display ":0.0".
    Thanks in advance
    Last edited by Slurp (2009-03-08 19:10:34)

    In your compiz.desktop instead of:
    Exec=compiz ccp
    It should be:
    Exec=compiz --sm-disable --ignore-desktop-hints ccp --indirect-rendering
    Edit:
    If you still have problems after that you need to export LIBGL_ALWAYS_INDIRECT=1, which is what fusion-icon is doing.
    Last edited by CursedMonkey (2009-03-04 21:41:03)

  • Compiz-fusion can't start

    I installed compiz-fusion. But it gives me following message when start fusion-icon:
    bash-3.2# fusion-icon
    * Detected Session: LXDE
    * Searching for installed applications...
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See http://www.gnome.org/projects/gconf/ for information. (Details -  1: Failed to get connection to session: Failed to execute dbus-launch to autolaunch D-Bus session)
    * No GLX_EXT_texture_from_pixmap with direct rendering context
    ... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1
    * Using the GTK Interface
    Traceback (most recent call last):
      File "/usr/bin/fusion-icon", line 58, in <module>
        choose_interface(try_first=options.interface)
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 89, in choose_interface
        import_interface(chosen_interface)
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 35, in import_interface
        __import__('FusionIcon.interface_%s' %interface)
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/__init__.py", line 3, in <module>
        import main
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py", line 23, in <module>
        import gtk
      File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 48, in <module>
        from gtk import _gtk
    AttributeError: 'module' object has no attribute 'CAPI'
    Is it python caused this problem? How to solved this problem?
    Regards.

    Ranguvar:
    Thanks for your concern.
    My display card is radeon 9600 and pentium m cpu.
    I had changed back to the newest version gnome,reinstalled compiz-fusion after removing with -Rs option. Both catalyst 8.11-02 and newest open source ati driver had been tried. Now it is the "No GLX_EXT_texture_from_pixmap" problem:
    bash-3.2# fusion-icon
    * Detected Session: gnome
    * Searching for installed applications...
    * No GLX_EXT_texture_from_pixmap with direct rendering context
    ... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1
    * Using the GTK Interface
    Traceback (most recent call last):
      File "/usr/bin/fusion-icon", line 58, in <module>
        choose_interface(try_first=options.interface)
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 89, in choose_interface
        import_interface(chosen_interface)
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface.py", line 35, in import_interface
        __import__('FusionIcon.interface_%s' %interface)
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/__init__.py", line 3, in <module>
        import main
      File "/usr/lib/python2.5/site-packages/FusionIcon/interface_gtk/main.py", line 23, in <module>
        import gtk
      File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 48, in <module>
        from gtk import _gtk
    AttributeError: 'module' object has no attribute 'CAPI'
    I had loaded compiz-fusion successfully before. But prolem came out after the recent update system.

  • Compiz Fusion doesn't work with Xorg 7.3 (fglrx)

    I recently reinstalled due to multiple issues. Now after the upgrade to Xorg 7.3, I am unable to start Compiz Fusion. I get this from fusion-icon:
    * Detected Session: kde
    * Searching for installed applications...
    * No GLX_EXT_texture_from_pixmap with direct rendering context
    ... nor with indirect rendering, this isn't going to work!
    * Using the GTK Interface
    * KWin is already running
    my xorg.conf:
    Auto-generated by Archie mkxcfg
    Section "ServerLayout"
    # Serial Mouse not detected
    # USB Mouse not detected
    Identifier "Xorg Configured"
    Screen 0 "aticonfig-Screen[0]" 0 0
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Module"
    Load "ddc" # ddc probing of monitor
    Load "dbe"
    Load "dri"
    Load "extmod"
    Load "glx"
    Load "bitmap" # bitmap-fonts
    Load "type1"
    Load "freetype"
    Load "record"
    EndSection
    Section "ServerFlags"
    Option "AllowMouseOpenFail" "true"
    Option "AIGLX" "true"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "keyboard"
    Option "CoreKeyboard"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "gb"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    VertRefresh 60
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]"
    Driver "fglrx"
    Option "XAANoOffscreenPixmaps" "true"
    Option "DRI" "true"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]"
    Device "aticonfig-Device[0]"
    Monitor "aticonfig-Monitor[0]"
    DefaultDepth 24
    EndSection
    Section "DRI"
    Group 0
    Mode 0666
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    and my Xorg.0.log
    _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
    _XSERVTransOpen: transport open failed for inet6/knights-desktop:0
    _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
    X.Org X Server 1.4.0
    Release Date: 5 September 2007
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-rc1-ARCH x86_64
    Current Operating System: Linux knights-desktop 2.6.23-ARCH #1 SMP PREEMPT Sat Oct 27 10:52:38 CEST 2007 x86_64
    Build Date: 07 November 2007 10:56:33AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 18 09:27:02 2007
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Xorg Configured"
    (**) |-->Screen "aticonfig-Screen[0]" (0)
    (**) | |-->Monitor "aticonfig-Monitor[0]"
    (**) | |-->Device "aticonfig-Device[0]"
    (**) |-->Input Device "Keyboard0"
    (**) Option "AllowMouseOpenFail" "true"
    (**) Option "AIGLX" "true"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified. Using compiled-in default.
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/100dpi").
    (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
    Entry deleted from font path.
    (Run 'mkfontdir' on "/usr/share/fonts/75dpi").
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (==) |-->Input Device "<default pointer>"
    (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x7af4e0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (++) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 8086,2770 card 1028,01ab rev 02 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 8086,2771 card 0000,0000 rev 02 class 06,04,00 hdr 01
    (II) PCI: 00:1c:0: chip 8086,27d0 card 0000,0000 rev 01 class 06,04,00 hdr 81
    (II) PCI: 00:1d:0: chip 8086,27c8 card 1028,01ab rev 01 class 0c,03,00 hdr 80
    (II) PCI: 00:1d:1: chip 8086,27c9 card 1028,01ab rev 01 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:2: chip 8086,27ca card 1028,01ab rev 01 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:3: chip 8086,27cb card 1028,01ab rev 01 class 0c,03,00 hdr 00
    (II) PCI: 00:1d:7: chip 8086,27cc card 1028,01ab rev 01 class 0c,03,20 hdr 00
    (II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev e1 class 06,04,01 hdr 01
    (II) PCI: 00:1f:0: chip 8086,27b8 card 0000,0000 rev 01 class 06,01,00 hdr 80
    (II) PCI: 00:1f:1: chip 8086,27df card 1028,01ab rev 01 class 01,01,8a hdr 00
    (II) PCI: 00:1f:2: chip 8086,27c0 card 1028,01ab rev 01 class 01,01,8f hdr 00
    (II) PCI: 00:1f:3: chip 8086,27da card 1028,01ab rev 01 class 0c,05,00 hdr 00
    (II) PCI: 01:00:0: chip 1002,5b60 card 1002,0302 rev 00 class 03,00,00 hdr 80
    (II) PCI: 01:00:1: chip 1002,5b70 card 1002,0303 rev 00 class 03,80,00 hdr 00
    (II) PCI: 03:02:0: chip 1102,0004 card 1102,2006 rev 04 class 04,01,00 hdr 80
    (II) PCI: 03:02:1: chip 1102,7003 card 1102,0040 rev 04 class 09,80,00 hdr 80
    (II) PCI: 03:02:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
    (II) PCI: 03:03:0: chip 14e4,4318 card 14e4,7001 rev 02 class 02,80,00 hdr 00
    (II) PCI: 03:08:0: chip 8086,27dc card 1028,01ab rev 01 class 02,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Intel Bridge workaround enabled
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,3), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xefd00000 - 0xefefffff (0x200000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b]
    (II) PCI-to-PCI bridge:
    (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xefc00000 - 0xefcfffff (0x100000) MX[b]
    (II) Subtractive PCI-to-PCI bridge:
    (II) Bus 3: bridge is at (0:30:0), (0,3,3), BCTRL: 0x0002 (VGA_EN is cleared)
    (II) Bus 3 I/O range:
    [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[b]
    (II) Bus 3 non-prefetchable memory range:
    [0] -1 0 0xefb00000 - 0xefbfffff (0x100000) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)] rev 0, Mem @ 0xe0000000/27, 0xefde0000/16, I/O @ 0xdc00/8, BIOS @ 0xefe00000/17
    (--) PCI: (1:0:1) ATI Technologies Inc RV370 [Radeon X300SE] rev 0, Mem @ 0xefdf0000/16
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) Active PCI resource ranges:
    [0] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
    [1] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
    [2] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
    [3] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
    [4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
    [5] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
    [6] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
    [7] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
    [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
    [9] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
    [10] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
    [11] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
    [12] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
    [13] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
    [14] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
    [15] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
    [16] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
    [17] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
    [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
    [24] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
    [25] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
    [26] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
    [27] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
    [1] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
    [2] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
    [3] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
    [4] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
    [5] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
    [6] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
    [7] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
    [8] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
    [9] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
    [10] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
    [11] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
    [12] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
    [13] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
    [14] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
    [15] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
    [16] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
    [17] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [18] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
    [19] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [20] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [21] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [23] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
    [24] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
    [25] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
    [26] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
    [27] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
    [5] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
    [6] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
    [7] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
    [8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
    [9] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
    [10] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
    [11] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
    [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
    [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [15] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
    [16] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
    [17] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
    [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
    [19] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
    [20] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
    [21] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
    [22] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
    [23] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [24] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
    [25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
    [30] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
    [31] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
    [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
    [33] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "type1" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (**) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "type1"
    (II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
    (II) Module type1: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.2
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font Type1
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "fglrx"
    (II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
    (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.42.3
    Module class: X.Org Video Driver
    (II) LoadModule: "kbd"
    (II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
    (II) Module kbd: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    (II) Module mouse: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.3
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 2.0
    (II) Primary Device is: PCI 01:00:0
    (II) ATI Proprietary Linux Driver Version Identifier:8.42.3
    (II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.423.2
    (II) ATI Proprietary Linux Driver Build Date: Oct 19 2007 16:14:11
    (--) Assigning device section with no busID to primary device
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (--) Chipset Supported AMD Graphics Processor (0x5B60) found
    (II) AMD Video driver is running on a device belonging to a group targeted for this release
    (II) AMD Video driver is signed
    (II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
    [5] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
    [6] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
    [7] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
    [8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
    [9] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
    [10] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
    [11] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
    [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
    [13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [14] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [15] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
    [16] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
    [17] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
    [18] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
    [19] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
    [20] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
    [21] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
    [22] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
    [23] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [24] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
    [25] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [26] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [27] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [29] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
    [30] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
    [31] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
    [32] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
    [33] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
    (II) fglrx(0): pEnt->device->identifier=0x7ed860
    (II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
    [5] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
    [6] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
    [7] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
    [8] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
    [9] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
    [10] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
    [11] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
    [12] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
    [13] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
    [14] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
    [15] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
    [16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [17] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [18] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
    [19] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
    [20] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
    [21] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
    [22] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
    [23] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
    [24] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
    [25] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
    [26] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [27] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
    [28] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [29] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [30] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [32] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
    [33] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
    [34] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
    [35] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
    [36] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
    [37] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
    [38] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [atiddxPreInit] === begin, [x]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (II) fglrx(0): Creating default Display subsection in Screen section
    "aticonfig-Screen[0]" for depth/fbbpp 24/32
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "dri" "true"
    (**) fglrx(0): Option "DPMS" "true"
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (==) fglrx(0): Gamma Correction for I is 0x06419064
    (==) fglrx(0): Gamma Correction for II is 0x06419064
    (==) fglrx(0): Buffer Tiling is ON
    (--) fglrx(0): Chipset: "Radeon X300/X550/X1050 Series" (Chipset = 0x5b60)
    (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0302)
    (--) fglrx(0): board vendor info: original ATI graphics adapter
    (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
    (--) fglrx(0): MMIO registers at 0xefde0000
    (==) fglrx(0): ROM-BIOS at 0x000c0000
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 2.0
    (II) fglrx(0): VESA BIOS detected
    (II) fglrx(0): VESA VBE Version 2.0
    (II) fglrx(0): VESA VBE Total Mem: 16384 kB
    (II) fglrx(0): VESA VBE OEM: ATI RV380
    (II) fglrx(0): VESA VBE OEM Software Rev: 1.0
    (II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    (II) fglrx(0): VESA VBE OEM Product: V380
    (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmGetBusid returned ''
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
    compiled for 7.1.0, module version = 8.42.3
    ABI class: X.Org Server Extension, version 0.3
    (--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
    (II) fglrx(0): PCIE card detected
    (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"(II) Module "ddc" already built-in
    (II) fglrx(0): Connected Display1: CRT on primary DAC [crt1]
    (II) fglrx(0): Display1 EDID data ---------------------------
    (II) fglrx(0): Manufacturer: DEL Model: a00b Serial#: 809061708
    (II) fglrx(0): Year: 2005 Week: 28
    (II) fglrx(0): EDID Version: 1.3
    (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    (II) fglrx(0): Sync: Separate
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
    (II) fglrx(0): Gamma: 2.20
    (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    (II) fglrx(0): Default color space is primary color space
    (II) fglrx(0): First detailed timing is preferred mode
    (II) fglrx(0): redX: 0.640 redY: 0.340 greenX: 0.279 greenY: 0.619
    (II) fglrx(0): blueX: 0.140 blueY: 0.069 whiteX: 0.310 whiteY: 0.330
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): 1280x1024@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported Future Video Modes:
    (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
    (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 80 kHz, PixClock max 140 MHz
    (II) fglrx(0): Serial No: U494157809ML
    (II) fglrx(0): Monitor name: DELL E173FP
    (II) fglrx(0): EDID (in hex):
    (II) fglrx(0): 00ffffffffffff0010ac0ba04c4d3930
    (II) fglrx(0): 1c0f010368221b78eecaf6a357479e23
    (II) fglrx(0): 114f54a54b00714f8180010101010101
    (II) fglrx(0): 010101010101302a009851002a403070
    (II) fglrx(0): 1300520e1100001e000000fd00384b1f
    (II) fglrx(0): 500e000a202020202020000000ff0055
    (II) fglrx(0): 3439343135373830394d4c0a000000fc
    (II) fglrx(0): 0044454c4c204531373346500a2000c7
    (II) fglrx(0): End of Display1 EDID data --------------------
    (WW) fglrx(0): Only one display is connnected,so single mode is enabled
    (II) fglrx(0): Primary Controller - CRT on primary DAC
    (II) fglrx(0): Internal Desktop Setting: 0x00000001
    (II) fglrx(0): POWERplay version 3. 1 power state available:
    (II) fglrx(0): 1. 324/196MHz @ 50Hz [enable load balancing]
    (==) fglrx(0): Qbs disabled
    (==) fglrx(0): FAST_SWAP disabled
    (==) fglrx(0): PseudoColor visuals disabled
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total of 31 modes found for primary display.
    (--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
    (**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
    (**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
    (**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
    (**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
    (**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
    (**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
    (**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
    (**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
    (**) fglrx(0): *Mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x480"x60.0 38.16 1024 1048 1152 1280 480 481 484 497 +hsync (29.8 kHz)
    (**) fglrx(0): *Mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0 31.48 848 864 952 1056 480 481 484 497 +hsync (29.8 kHz)
    (**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
    (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
    (**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
    (**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
    (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
    (**) fglrx(0): *Mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
    (**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
    (**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
    (**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
    (**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
    (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
    (**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
    (**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
    (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
    (**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
    (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
    (**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
    (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
    (--) fglrx(0): Display dimensions: (340, 270) mm
    (--) fglrx(0): DPI set to (95, 96)
    (--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
    (**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 (80.0 kHz)
    (**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x70.0 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync (74.6 kHz)
    (**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
    (**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 (67.5 kHz)
    (**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1152x864"x70.0 96.76 1152 1224 1344 1536 864 865 868 900 +hsync (63.0 kHz)
    (**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
    (**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
    (**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
    (**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
    (**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
    (**) fglrx(0): *Mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x480"x60.0 38.16 1024 1048 1152 1280 480 481 484 497 +hsync (29.8 kHz)
    (**) fglrx(0): *Mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "848x480"x60.0 31.48 848 864 952 1056 480 481 484 497 +hsync (29.8 kHz)
    (**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
    (**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
    (**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
    (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
    (**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
    (**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
    (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
    (**) fglrx(0): *Mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x576"x60.0 32.66 720 744 816 912 576 577 580 597 +hsync (35.8 kHz)
    (**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
    (**) fglrx(0): *Mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
    (**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
    (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
    (**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
    (**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
    (**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
    (**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
    (**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
    (**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
    (**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
    (**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
    (**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
    (**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
    (II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
    (==) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/lib/xorg/modules//libxaa.so
    (II) Module xaa: vendor="X.Org Foundation"
    compiled for 1.4.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 2.0
    (==) fglrx(0): HPV inactive
    (**) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
    (II) fglrx(0): Depth moves disabled by default
    (==) fglrx(0): Capabilities: 0x00000000
    (==) fglrx(0): CapabilitiesEx: 0x00000000
    (==) fglrx(0): cpuFlags: 0x8000001d
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): ATI GART size: 256 MB
    (II) fglrx(0): [pcie] 258048 kB allocated with handle 0xdeadbeef
    (II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
    (==) fglrx(0): UseFastTLS=0
    (==) fglrx(0): BlockSignalsOnLock=1
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] 0 0 0xefde0000 - 0xefdeffff (0x10000) MX[b]
    [1] 0 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [6] -1 0 0xefbf9000 - 0xefbf9fff (0x1000) MX[b]
    [7] -1 0 0xefbfa000 - 0xefbfbfff (0x2000) MX[b]
    [8] -1 0 0xefbfc000 - 0xefbfffff (0x4000) MX[b]
    [9] -1 0 0xefbf8800 - 0xefbf8fff (0x800) MX[b]
    [10] -1 0 0xffa80800 - 0xffa80bff (0x400) MX[b]
    [11] -1 0 0xefdf0000 - 0xefdfffff (0x10000) MX[b](B)
    [12] -1 0 0xefe00000 - 0xefe1ffff (0x20000) MX[b](B)
    [13] -1 0 0xefde0000 - 0xefdeffff (0x10000) MX[b](B)
    [14] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[b](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
    [18] 0 0 0x0000dc00 - 0x0000dcff (0x100) IX[b]
    [19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [20] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [21] -1 0 0x0000ccc0 - 0x0000ccff (0x40) IX[b]
    [22] -1 0 0x0000cc78 - 0x0000cc7f (0x8) IX[b]
    [23] -1 0 0x0000cc80 - 0x0000ccbf (0x40) IX[b]
    [24] -1 0 0x0000ece0 - 0x0000ecff (0x20) IX[b]
    [25] -1 0 0x0000fea0 - 0x0000feaf (0x10) IX[b]
    [26] -1 0 0x0000fe30 - 0x0000fe33 (0x4) IX[b]
    [27] -1 0 0x0000fe20 - 0x0000fe27 (0x8) IX[b]
    [28] -1 0 0x0000fe10 - 0x0000fe13 (0x4) IX[b]
    [29] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
    [30] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[b]
    [31] -1 0 0x00000374 - 0x00000374 (0x1) IX[b]
    [32] -1 0 0x00000170 - 0x00000177 (0x8) IX[b]
    [33] -1 0 0x000003f4 - 0x000003f4 (0x1) IX[b]
    [34] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
    [35] -1 0 0x0000ff20 - 0x0000ff3f (0x20) IX[b]
    [36] -1 0 0x0000ff40 - 0x0000ff5f (0x20) IX[b]
    [37] -1 0 0x0000ff60 - 0x0000ff7f (0x20) IX[b]
    [38] -1 0 0x0000ff80 - 0x0000ff9f (0x20) IX[b]
    [39] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[b](B)
    [40] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
    [41] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
    (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
    (WW) fglrx(0): could not detect X server version (query_status=-3)
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenByBusid: drmOpenMinor returns 7
    drmOpenByBusid: drmGetBusid reports
    drmOpenDevice: node name is /dev/dri/card1
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card2
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card3
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card4
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card5
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card6
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card7
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card8
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card9
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card10
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card11
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card12
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card13
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card14
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenByBusid: drmOpenMinor returns -19
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 7, (OK)
    drmGetBusid returned ''
    (II) [drm] DRM interface version 1.0
    (II) [drm] DRM open master succeeded.
    (II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) fglrx(0): [drm] framebuffer handle = 0x3000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): X context handle = 0x1
    (II) fglrx(0): [drm] installed DRM signal handler
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0): Name: fglrx
    (II) fglrx(0): Version: 8.42.3
    (II) fglrx(0): Date: Oct 19 2007
    (II) fglrx(0): Desc: ATI FireGL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.23-ARCH
    (II) fglrx(0): Build-Kernel MODVERSIONS: no
    (II) fglrx(0): Build-Kernel __SMP__: no
    (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
    (II) fglrx(0): [drm] register handle = 0x00005000
    (II) fglrx(0): Interrupt handler installed at IRQ 16.
    (II) fglrx(0): Exposed events to the /proc interface
    (II) fglrx(0): DRI initialization successfull!
    (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x00701c00
    (II) fglrx(0): FBMM initialized for area (0,0)-(1280,1435)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
    (II) fglrx(0): Largest offscreen area available: 1280 x 411
    (==) fglrx(0): Backing store disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (**) fglrx(0): DPMS enabled
    (**) fglrx(0): Option "XaaNoOffscreenPixmaps" "true"
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Solid Lines
    Dashed Lines
    Setting up tile and stipple cache:
    30 128x128 slots
    (II) fglrx(0): Acceleration enabled
    (WW) fglrx(0): Option "VendorName" is not used
    (WW) fglrx(0): Option "ModelName" is not used
    (II) fglrx(0): [DRI] installation complete
    (II) fglrx(0): Direct rendering enabled
    [atiddx] ASYNCIO init succeed!
    (==) fglrx(0): Silken mouse enabled
    (==) fglrx(0): Using hardware cursor
    (==) RandR enabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension XAccessControlExtension
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: Searching for BusID PCI:1:0:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 8, (OK)
    drmOpenByBusid: drmOpenMinor returns 8
    drmOpenByBusid: drmGetBusid reports PCI:1:0:0
    (WW) AIGLX: 3D driver claims to not support visual 0x23
    (WW) AIGLX: 3D driver claims to not support visual 0x24
    (WW) AIGLX: 3D driver claims to not support visual 0x25
    (WW) AIGLX: 3D driver claims to not support visual 0x26
    (WW) AIGLX: 3D driver claims to not support visual 0x27
    (WW) AIGLX: 3D driver claims to not support visual 0x28
    (WW) AIGLX: 3D driver claims to not support visual 0x29
    (WW) AIGLX: 3D driver claims to not support visual 0x2a
    (WW) AIGLX: 3D driver claims to not support visual 0x2b
    (WW) AIGLX: 3D driver claims to not support visual 0x2c
    (WW) AIGLX: 3D driver claims to not support visual 0x2d
    (WW) AIGLX: 3D driver claims to not support visual 0x2e
    (WW) AIGLX: 3D driver claims to not support visual 0x2f
    (WW) AIGLX: 3D driver claims to not support visual 0x30
    (WW) AIGLX: 3D driver claims to not support visual 0x31
    (WW) AIGLX: 3D driver claims to not support visual 0x32
    (WW) AIGLX: 3D driver claims to not support visual 0x33
    (WW) AIGLX: 3D driver claims to not support visual 0x34
    (WW) AIGLX: 3D driver claims to not support visual 0x35
    (WW) AIGLX: 3D driver claims to not support visual 0x36
    (WW) AIGLX: 3D driver claims to not support visual 0x37
    (WW) AIGLX: 3D driver claims to not support visual 0x38
    (WW) AIGLX: 3D driver claims to not support visual 0x39
    (WW) AIGLX: 3D driver claims to not support visual 0x3a
    (WW) AIGLX: 3D driver claims to not support visual 0x3b
    (WW) AIGLX: 3D driver claims to not support visual 0x3c
    (WW) AIGLX: 3D driver claims to not support visual 0x3d
    (WW) AIGLX: 3D driver claims to not support visual 0x3e
    (WW) AIGLX: 3D driver claims to not support visual 0x3f
    (WW) AIGLX: 3D driver claims to not support visual 0x40
    (WW) AIGLX: 3D driver claims to not support visual 0x41
    (WW) AIGLX: 3D driver claims to not support visual 0x42
    (WW) AIGLX: 3D driver claims to not support visual 0x43
    (WW) AIGLX: 3D driver claims to not support visual 0x44
    (WW) AIGLX: 3D driver claims to not support visual 0x45
    (WW) AIGLX: 3D driver claims to not support visual 0x46
    (WW) AIGLX: 3D driver claims to not support visual 0x47
    (WW) AIGLX: 3D driver claims to not support visual 0x48
    (WW) AIGLX: 3D driver claims to not support visual 0x49
    (WW) AIGLX: 3D driver claims to not support visual 0x4a
    (WW) AIGLX: 3D driver claims to not support visual 0x4b
    (WW) AIGLX: 3D driver claims to not support visual 0x4c
    (WW) AIGLX: 3D driver claims to not support visual 0x4d
    (WW) AIGLX: 3D driver claims to not support visual 0x4e
    (WW) AIGLX: 3D driver claims to not support visual 0x4f
    (WW) AIGLX: 3D driver claims to not support visual 0x50
    (WW) AIGLX: 3D driver claims to not support visual 0x51
    (WW) AIGLX: 3D driver claims to not support visual 0x52
    (WW) AIGLX: 3D driver claims to not support visual 0x53
    (WW) AIGLX: 3D driver claims to not support visual 0x54
    (WW) AIGLX: 3D driver claims to not support visual 0x55
    (WW) AIGLX: 3D driver claims to not support visual 0x56
    (WW) AIGLX: 3D driver claims to not support visual 0x57
    (WW) AIGLX: 3D driver claims to not support visual 0x58
    (WW) AIGLX: 3D driver claims to not support visual 0x59
    (WW) AIGLX: 3D driver claims to not support visual 0x5a
    (WW) AIGLX: 3D driver claims to not support visual 0x5b
    (WW) AIGLX: 3D driver claims to not support visual 0x5c
    (WW) AIGLX: 3D driver claims to not support visual 0x5d
    (WW) AIGLX: 3D driver claims to not support visual 0x5e
    (WW) AIGLX: 3D driver claims to not support visual 0x5f
    (WW) AIGLX: 3D driver claims to not support visual 0x60
    (WW) AIGLX: 3D driver claims to not support visual 0x61
    (WW) AIGLX: 3D driver claims to not support visual 0x62
    (WW) AIGLX: 3D driver claims to not support visual 0x63
    (WW) AIGLX: 3D driver claims to not support visual 0x64
    (WW) AIGLX: 3D driver claims to not support visual 0x65
    (WW) AIGLX: 3D driver claims to not support visual 0x66
    (WW) AIGLX: 3D driver claims to not support visual 0x67
    (WW) AIGLX: 3D driver claims to not support visual 0x68
    (WW) AIGLX: 3D driver claims to not support visual 0x69
    (WW) AIGLX: 3D driver claims to not support visual 0x6a
    (WW) AIGLX: 3D driver claims to not support visual 0x6b
    (WW) AIGLX: 3D driver claims to not support visual 0x6c
    (WW) AIGLX: 3D driver claims to not support visual 0x6d
    (WW) AIGLX: 3D driver claims to not support visual 0x6e
    (WW) AIGLX: 3D driver claims to not support visual 0x6f
    (WW) AIGLX: 3D driver claims to not support visual 0x70
    (WW) AIGLX: 3D driver claims to not support visual 0x71
    (WW) AIGLX: 3D driver claims to not support visual 0x72
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/fglrx_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (**) Option "CoreKeyboard"
    (**) Keyboard0: always reports core events
    (**) Option "Protocol" "standard"
    (**) Keyboard0: Protocol: standard
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xorg"
    (**) Keyboard0: XkbRules: "xorg"
    (**) Option "XkbModel" "pc105"
    (**) Keyboard0: XkbModel: "pc105"
    (**) Option "XkbLayout" "gb"
    (**) Keyboard0: XkbLayout: "gb"
    (**) Option "CustomKeycodes" "off"
    (**) Keyboard0: CustomKeycodes disabled
    (WW) <default pointer>: No Device specified, looking for one...
    (II) <default pointer>: Setting Device option to "/dev/input/mice"
    (--) <default pointer>: Device: "/dev/input/mice"
    (==) <default pointer>: Protocol: "Auto"
    (**) Option "CorePointer"
    (**) <default pointer>: always reports core events
    (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    (**) <default pointer>: Buttons: 9
    (**) <default pointer>: Sensitivity: 1
    (II) evaluating device (<default pointer>)
    (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
    (II) evaluating device (Keyboard0)
    (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    (--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
    (II) <default pointer>: ps2EnableDataReporting: succeeded
    (II) 3rd Button detected: disabling emulate3Button
    Any ideas?

    See this thread
    X.org 7.3 + fglrx 8.42.3 and beryl/compiz/compiz fusion is a no go. Try a search, or take a look at the phoronix forums.
    Last edited by BJJ (2007-11-18 22:40:43)

  • [SOLVED] Compiz-Fusion and mouse pointers

    Hello,
    I am having a bit of trouble using Gnome with Compiz-Fusion and trying to use the Vienna 3 Rapture mouse theme, or any non-default theme for that matter. Said theme worked fine for me in Fluxbox, but since I started using Gnome/Compiz it isn't working right.
    I have my TV as a dual monitor, and the Vienna pointer works fine on it. On my main monitor though I get the standard black cursor. I can change it to red or white glass, but I can't get Vienna or any other cursor to appear on the list of pointers to change too. My mouse does switch to Vienna in Google Earth, but that's the only app I've seen so far that it works in.
    Sometimes when I start X the Vienna cursor will appear for a moment before being overridden and sometimes it goes straight from the 'X' pointer to the default Gnome pointer. Perhaps on those occasions it just happens to fast for me to see.
    I found a tip on a forum (that I can't find now to link to unfortunately....) that mentioned adding 'xsetrroot -cursor_name something something' (sorry I can't remember the exact command) to ~/.xinitrc before gnome-session. That didn't help at all. One thing I wasn't sure of though is whether to actually type '-cursor_name' or whether I should type the name of my cursor. I know that sounds stupid but the tip on the forum said to type it EXACTLY as shown. Generally they make a note of saying 'use your real path instead' or something of the like. 
    I have my mouse themes, several of them, not just this one, and all of which worked in Fluxbox, setting in ~/.icons but they don't show up in the list of cursors available. My Vienna cursor is still set apparently since it works on the TV, which is of course running Gnome/Compiz also.
    Does anyone have any ideas as to what I might be doing wrong here? Thanks for any advice.
    Last edited by The Avatar of Time (2009-05-24 04:58:53)

    While I haven't figured this out yet, oddly enough after a restart (which I have done before) the cursor is 'kind of' working. It shows on the desktop and on the window borders, but not IN apps like Firefox or Pidgin.
    It does however still work in Oxine. So I'm at a loss as to what's wrong and why it suddenly started partially working. Any ideas any one?
    ***I also noticed that the cursor is working in the 'Appearance' window, as well as some other config windows like the one for avant window navigator. It works in 'calculator' on the buttons, but if I were to hover over the display then it reverts to the default cursor.
    Last edited by The Avatar of Time (2008-12-10 03:09:13)

  • [SOLVED][GNOME] Pulseaudio doesn't start

    Hey,
    On cinnamon, pulseaudio starts on startup but with gnome3.8/3.6 pulseaudio doesn't start.
    I always need to start it manually via `pulseaudio --start`.
    Does someone know how to fix this?
    Thanks in advance!
    Last edited by sh4nks (2013-05-01 07:04:20)

    ijanos wrote:Run gnome-session-properties and enable "PulseAudio Sound System"
    Thanks!
    But there wasn't such an entry so I have to add by myself
    If someone is curious how I added it..:
    1. Run `gnome-session-propertiers`
    2. Click on `Add`
    3. Fill in
    `Name` with `PulseAudio Sound System` or something like that and
    `Command` with `start-pulseaudio-x11`
    Thats it!
    Last edited by sh4nks (2013-05-01 07:07:03)

  • [SOLVED]Compiz-fusion wallpaper plugin!!!

    Hello!
         i'm a newbie in linux, i would like to have 4 different wallpapers on each side of the cube, i tried wallpapoz, but im not satisfied. Finally i figured out that there is a plugin in compiz fusion, named wallaper plugin what can do this trick for me, but because Nautilus does not natively support multiple wallpapers, a patch is required for this plugin to work correctly when using Nautilus. And here is the problem. I found these patches:
    http://www.russ.co.il/patch/02_compiz_background.patch
    http://www.russ.co.il/patch/30_rgba_colormap.patch
    But these patches are made for nautilus & eel ver. 2.20.0, and i have ver 2.24.2-1 so i removed my eel and nautilus and made these operations:
    tar -xvzf nautilus-2.20.0.tar.gz
    tar -xvzf eel-2.20.0.tar.gz
    mv 02_compiz_background.patch eel-2.20.0
    mv 30_rgba_colormap.patch nautilus-2.20.0
    cd eel-2.20.0
    patch -p1 <02_compiz_background.patch
    ./configure && make && make install
    cd ../nautilus-2.20.0
    patch -p1 <30_rgba_colormap.patch
    ./configure && make && make install
    but after make install i get an error message. I tried with higher versions of eel but without success.
    Somebody can help me, how to use compiz-fusion wallpaper plugin on my Arch/GNOME sistem?
    THX
    After make install eel i get this error:
    test-eel-image-table.c: In function 'image_table_child_pressed_callback':
    test-eel-image-table.c:126: error: 'G_GNUC_FUNCTION' undeclared (first use in this function)
    test-eel-image-table.c:126: error: (Each undeclared identifier is reported only once
    test-eel-image-table.c:126: error: for each function it appears in.)
    test-eel-image-table.c: In function 'image_table_child_released_callback':
    test-eel-image-table.c:141: error: 'G_GNUC_FUNCTION' undeclared (first use in this function)
    test-eel-image-table.c: In function 'image_table_child_clicked_callback':
    test-eel-image-table.c:156: error: 'G_GNUC_FUNCTION' undeclared (first use in this function)
    test-eel-image-table.c: In function 'foo_timeout':
    test-eel-image-table.c:167: error: 'G_GNUC_FUNCTION' undeclared (first use in this function)
    test-eel-image-table.c: In function 'image_table_size_allocate':
    test-eel-image-table.c:195: error: 'G_GNUC_FUNCTION' undeclared (first use in this function)
    make[2]: *** [test-eel-image-table.o] Error 1
    make[2]: Leaving directory `/opt/eel-2.20.0/test'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/opt/eel-2.20.0'
    make: *** [all] Error 2
    and because of dependency i cant install anutilus (
    Last edited by dejavus (2009-02-13 09:13:19)

    This is my compiz-fusion wallpaper plugin settings. I disabled desktop-gnome-background-draw_background but my desktop became green, and no idea what i have done wrong . Any idea ?

  • [SOLVED] Compiz fusion-icon won't run

    Hello,
    I'm new to Arch Linux and I've just installed it on my laptop. I want to run Compiz on XFCE: I tried the methods on the Arch Wiki (https://wiki.archlinux.org/index.php/Co … icon.22.29) on replacing XFWM with Compiz. The second method doesn't work, only the first one works, but I don't want to use that one.
    I've tried the third method, but when I followed the instructions and I rebooted my computer, I've got no window manager at all: I have to manually load Compiz.
    The only thing that works right now is following the third method and also do the first one at together.
    But I just want to do either the second or the third method. Does anyone know how to solve this problem?
    Thank you in advance.
    (Sorry for bad English).
    Last edited by jonasty123dm (2013-02-27 18:46:56)

    ewaller wrote:It is your system, so do as you will.   I really do not recommend running compiz as root.  Enough said.
    Hi, I didn't mean running Compiz as root: I just edited this file: "/etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-session.xml" to make Compiz start for all users. I followed the method without the fusion icon this time (https://wiki.archlinux.org/index.php/Co … icon.22.29) and everything works now.
    Thank you very much for the help.
    (P.S.: I don't know how to mark this thread as SOLVED).
    Last edited by jonasty123dm (2013-02-27 13:06:12)

  • [SOLVED] Opendias service doesn't start

    Hello,
    I've just installed the package opendias built from the AUR. But I'm facing 2 problems:
    1) I cannot start the service using systemctl. The binary starts fine by running it directly.
    2) I also have issues finding the scanner that works properly using SANE.
    My user was added to the opendias group. Any idea on how to solve this? Thank you in advance.
    [paulo@SonyVaio ~]$ systemctl status opendias.service -l
    ● opendias.service - OpenDIAS (Document Imaging Archive System)
    Loaded: loaded (/usr/lib/systemd/system/opendias.service; enabled)
    Active: failed (Result: start-limit) since Sáb 2014-05-10 23:24:05 WEST; 1min 32s ago
    Process: 3005 ExecStart=/usr/bin/opendias (code=exited, status=1/FAILURE)
    Mai 10 23:24:05 SonyVaio systemd[1]: Failed to start OpenDIAS (Document Imaging Archive System).
    Mai 10 23:24:05 SonyVaio systemd[1]: Unit opendias.service entered failed state.
    Mai 10 23:24:05 SonyVaio systemd[1]: opendias.service holdoff time over, scheduling restart.
    Mai 10 23:24:05 SonyVaio systemd[1]: Stopping OpenDIAS (Document Imaging Archive System)...
    Mai 10 23:24:05 SonyVaio systemd[1]: Starting OpenDIAS (Document Imaging Archive System)...
    Mai 10 23:24:05 SonyVaio systemd[1]: opendias.service start request repeated too quickly, refusing to start.
    Mai 10 23:24:05 SonyVaio systemd[1]: Failed to start OpenDIAS (Document Imaging Archive System).
    Mai 10 23:24:05 SonyVaio systemd[1]: Unit opendias.service entered failed state.
    [paulo@SonyVaio ~]$ whereis opendias
    opendias: /usr/bin/opendias /usr/lib/opendias /etc/opendias /usr/etc/opendias /usr/share/opendias
    Last edited by BullGates (2014-05-11 00:11:19)

    Update: service start solved. the database and the log files were set as root, after fixing it to the user opendias it works fine.
    Regarding 2) when I use scanimage -L, the output is:
    [paulo@SonyVaio ~]$ scanimage -L
    device `epkowa:net:192.168.1.67:1865' is a Epson Stylus NX330/SX430W/TX430W/ME OFFICE 570W Series flatbed scanner
    but if I issue a command sane-find-scanner it doesn't seem to find the scanner. Seems like a problem from opendias

  • [SOLVED] Graphical Interface doesn't start with Radeon HD 7670M

    Hi everyone!
    I just bought a new laptop: Toshiba Satellite L855-14Z with a Radeon HD 7670M graphic chip.
    I installed Arch Linux and everything works fine except the graphical interface.
    I have tried 3 options and all result in strange log files:
    1. KMS DISABLED / OPEN-SOURCE-DRIVER
    Output on screen:     Reached Graphical Interface
    Xorg.0.log:
    [ 8.777]
    X.Org X Server 1.13.2
    Release Date: 2013-01-24
    [ 8.777] X Protocol Version 11, Revision 0
    [ 8.777] Build Operating System: Linux 3.7.4-1-ARCH x86_64
    [ 8.777] Current Operating System: Linux march 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64
    [ 8.777] Kernel command line: root=/dev/sda2 ro radeon.modeset=0 rootfstype=ext4 systemd.unit=graphical.target initrd=EFI\arch\initramfs-arch.img
    [ 8.777] Build Date: 25 January 2013 09:33:50AM
    [ 8.777]
    [ 8.777] Current version of pixman: 0.28.2
    [ 8.777] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 8.777] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 8.777] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 8 09:38:51 2013
    [ 8.812] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 8.839] (==) No Layout section. Using the first Screen section.
    [ 8.839] (==) No screen section available. Using defaults.
    [ 8.839] (**) |-->Screen "Default Screen Section" (0)
    [ 8.839] (**) | |-->Monitor "<default monitor>"
    [ 8.839] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 8.839] (==) Automatically adding devices
    [ 8.839] (==) Automatically enabling devices
    [ 8.839] (==) Automatically adding GPU devices
    [ 8.872] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 8.872] Entry deleted from font path.
    [ 8.893] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 8.893] Entry deleted from font path.
    [ 8.893] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 8.893] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 8.893] Entry deleted from font path.
    [ 8.893] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 8.893] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 8.893] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 8.893] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 8.894] (II) Loader magic: 0x7fcc40
    [ 8.894] (II) Module ABI versions:
    [ 8.894] X.Org ANSI C Emulation: 0.4
    [ 8.894] X.Org Video Driver: 13.1
    [ 8.894] X.Org XInput driver : 18.0
    [ 8.894] X.Org Server Extension : 7.0
    [ 8.894] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 8.897] (--) PCI:*(0:1:0:0) 1002:6840:1179:fb22 rev 0, Mem @ 0xb0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
    [ 8.897] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 8.905] Initializing built-in extension Generic Event Extension
    [ 8.905] Initializing built-in extension SHAPE
    [ 8.906] Initializing built-in extension MIT-SHM
    [ 8.906] Initializing built-in extension XInputExtension
    [ 8.906] Initializing built-in extension XTEST
    [ 8.906] Initializing built-in extension BIG-REQUESTS
    [ 8.906] Initializing built-in extension SYNC
    [ 8.906] Initializing built-in extension XKEYBOARD
    [ 8.906] Initializing built-in extension XC-MISC
    [ 8.906] Initializing built-in extension SECURITY
    [ 8.906] Initializing built-in extension XINERAMA
    [ 8.906] Initializing built-in extension XFIXES
    [ 8.906] Initializing built-in extension RENDER
    [ 8.906] Initializing built-in extension RANDR
    [ 8.906] Initializing built-in extension COMPOSITE
    [ 8.906] Initializing built-in extension DAMAGE
    [ 8.906] Initializing built-in extension MIT-SCREEN-SAVER
    [ 8.906] Initializing built-in extension DOUBLE-BUFFER
    [ 8.906] Initializing built-in extension RECORD
    [ 8.906] Initializing built-in extension DPMS
    [ 8.906] Initializing built-in extension X-Resource
    [ 8.906] Initializing built-in extension XVideo
    [ 8.906] Initializing built-in extension XVideo-MotionCompensation
    [ 8.906] Initializing built-in extension XFree86-VidModeExtension
    [ 8.906] Initializing built-in extension XFree86-DGA
    [ 8.906] Initializing built-in extension XFree86-DRI
    [ 8.906] Initializing built-in extension DRI2
    [ 8.906] (II) LoadModule: "glx"
    [ 8.924] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 8.939] (II) Module glx: vendor="X.Org Foundation"
    [ 8.939] compiled for 1.13.2, module version = 1.0.0
    [ 8.939] ABI class: X.Org Server Extension, version 7.0
    [ 8.939] (==) AIGLX enabled
    [ 8.940] Loading extension GLX
    [ 8.940] (==) Matched ati as autoconfigured driver 0
    [ 8.940] (==) Matched ati as autoconfigured driver 1
    [ 8.940] (==) Matched vesa as autoconfigured driver 2
    [ 8.940] (==) Matched modesetting as autoconfigured driver 3
    [ 8.940] (==) Matched fbdev as autoconfigured driver 4
    [ 8.940] (==) Assigned the driver to the xf86ConfigLayout
    [ 8.940] (II) LoadModule: "ati"
    [ 8.940] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    [ 8.948] (II) Module ati: vendor="X.Org Foundation"
    [ 8.948] compiled for 1.13.2, module version = 7.1.0
    [ 8.948] Module class: X.Org Video Driver
    [ 8.948] ABI class: X.Org Video Driver, version 13.1
    [ 8.948] (II) LoadModule: "radeon"
    [ 8.948] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    [ 8.980] (II) Module radeon: vendor="X.Org Foundation"
    [ 8.980] compiled for 1.13.2, module version = 7.1.0
    [ 8.980] Module class: X.Org Video Driver
    [ 8.980] ABI class: X.Org Video Driver, version 13.1
    [ 8.980] (II) LoadModule: "vesa"
    [ 8.981] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 8.987] (II) Module vesa: vendor="X.Org Foundation"
    [ 8.987] compiled for 1.13.0, module version = 2.3.2
    [ 8.987] Module class: X.Org Video Driver
    [ 8.987] ABI class: X.Org Video Driver, version 13.0
    [ 8.987] (II) LoadModule: "modesetting"
    [ 8.987] (WW) Warning, couldn't open module modesetting
    [ 8.987] (II) UnloadModule: "modesetting"
    [ 8.987] (II) Unloading modesetting
    [ 8.987] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 8.987] (II) LoadModule: "fbdev"
    [ 8.988] (WW) Warning, couldn't open module fbdev
    [ 8.988] (II) UnloadModule: "fbdev"
    [ 8.988] (II) Unloading fbdev
    [ 8.988] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 8.988] (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
    ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
    ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
    ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
    ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
    ATI Mobility Radeon HD 4670, ATI FirePro M5750,
    ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
    ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
    ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
    ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
    ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
    ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
    ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
    ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
    ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
    ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
    ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
    ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
    ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
    SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
    ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
    AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
    AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
    AMD Radeon HD 6300 Series Graphics,
    AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
    AMD Firestream 9350, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
    ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
    ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
    ATI Mobility Radeon HD 5800 Series,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
    ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
    ATI Mobility Radeon HD 5000 Series,
    ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
    ATI Mobility Radeon Graphics, CEDAR,
    ATI FirePro (FireGL) Graphics Adapter,
    ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
    ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
    AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
    CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
    BARTS, BARTS, Mobility Radeon HD 6000 Series,
    Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
    AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
    AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
    CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
    ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
    TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
    PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
    VERDE, VERDE, VERDE, VERDE, VERDE, VERDE
    [ 8.994] (II) VESA: driver for VESA chipsets: vesa
    [ 8.994] (++) using VT number 1
    [ 9.005] (II) [KMS] drm report modesetting isn't supported.
    [ 9.005] (II) [KMS] drm report modesetting isn't supported.
    [ 9.005] (II) [KMS] drm report modesetting isn't supported.
    [ 9.005] (II) [KMS] drm report modesetting isn't supported.
    [ 9.005] (II) [KMS] drm report modesetting isn't supported.
    [ 9.005] (EE) Screen 0 deleted because of no matching config section.
    [ 9.005] (II) UnloadModule: "radeon"
    [ 9.005] (EE) Screen 0 deleted because of no matching config section.
    [ 9.005] (II) UnloadModule: "radeon"
    [ 9.005] (EE) Screen 0 deleted because of no matching config section.
    [ 9.005] (II) UnloadModule: "radeon"
    [ 9.005] (EE) Screen 0 deleted because of no matching config section.
    [ 9.005] (II) UnloadModule: "radeon"
    [ 9.005] (II) Loading sub module "vbe"
    [ 9.005] (II) LoadModule: "vbe"
    [ 9.005] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 9.013] (II) Module vbe: vendor="X.Org Foundation"
    [ 9.013] compiled for 1.13.2, module version = 1.1.0
    [ 9.013] ABI class: X.Org Video Driver, version 13.1
    [ 9.013] (II) Loading sub module "int10"
    [ 9.013] (II) LoadModule: "int10"
    [ 9.013] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 9.017] (II) Module int10: vendor="X.Org Foundation"
    [ 9.017] compiled for 1.13.2, module version = 1.0.0
    [ 9.017] ABI class: X.Org Video Driver, version 13.1
    [ 9.017] (II) VESA(0): initializing int10
    [ 9.017] (EE) VESA(0): Cannot read V_BIOS (3) Input/output error
    [ 9.017] (II) UnloadModule: "vesa"
    [ 9.017] (II) UnloadSubModule: "int10"
    [ 9.017] (II) Unloading int10
    [ 9.017] (II) UnloadSubModule: "vbe"
    [ 9.017] (II) Unloading vbe
    [ 9.017] (II) UnloadModule: "radeon"
    [ 9.018] (EE) Screen(s) found, but none have a usable configuration.
    [ 9.018]
    Fatal server error:
    [ 9.018] no screens found
    [ 9.018] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 9.018] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 9.018] (EE)
    [ 9.020] Server terminated with error (1). Closing log file.
    I have no "xinitrc" and no "xorg.conf".
    2. KMS ENABLED / OPEN-SOURCE-DRIVER
    This is the strangest: I just get a blank black screen with a little strip on top with the gnome 3 wallpaper in it. The height of the strip is only 2mm, but there is definetly a blue wallpaper.
    3. KMS DISABLED / PROPIETARY DRIVER
    Output on screen:     Reached Graphical Interface
    Xorg.0.log:
    [ 48.111]
    X.Org X Server 1.13.2
    Release Date: 2013-01-24
    [ 48.111] X Protocol Version 11, Revision 0
    [ 48.111] Build Operating System: Linux 3.7.4-1-ARCH x86_64
    [ 48.111] Current Operating System: Linux march 3.7.5-1-ARCH #1 SMP PREEMPT Mon Jan 28 10:03:32 CET 2013 x86_64
    [ 48.111] Kernel command line: root=/dev/sda2 ro nomodeset rootfstype=ext4 systemd.unit=graphical.target initrd=EFI\arch\initramfs-arch.img
    [ 48.112] Build Date: 25 January 2013 09:33:50AM
    [ 48.112]
    [ 48.112] Current version of pixman: 0.28.2
    [ 48.112] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 48.112] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 48.112] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 8 10:19:07 2013
    [ 48.112] (==) Using config file: "/etc/X11/xorg.conf"
    [ 48.113] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 48.113] (==) ServerLayout "aticonfig Layout"
    [ 48.113] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
    [ 48.113] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
    [ 48.113] (**) | |-->Device "aticonfig-Device[0]-0"
    [ 48.113] (==) Automatically adding devices
    [ 48.113] (==) Automatically enabling devices
    [ 48.113] (==) Automatically adding GPU devices
    [ 48.113] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 48.113] Entry deleted from font path.
    [ 48.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 48.113] Entry deleted from font path.
    [ 48.113] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 48.113] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 48.113] Entry deleted from font path.
    [ 48.113] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 48.113] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 48.113] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 48.113] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 48.113] (II) Loader magic: 0x7fcc40
    [ 48.113] (II) Module ABI versions:
    [ 48.113] X.Org ANSI C Emulation: 0.4
    [ 48.113] X.Org Video Driver: 13.1
    [ 48.113] X.Org XInput driver : 18.0
    [ 48.113] X.Org Server Extension : 7.0
    [ 48.115] (--) PCI:*(0:1:0:0) 1002:6840:1179:fb22 rev 0, Mem @ 0xb0000000/268435456, 0xc0000000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
    [ 48.116] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 48.116] Initializing built-in extension Generic Event Extension
    [ 48.116] Initializing built-in extension SHAPE
    [ 48.116] Initializing built-in extension MIT-SHM
    [ 48.116] Initializing built-in extension XInputExtension
    [ 48.116] Initializing built-in extension XTEST
    [ 48.116] Initializing built-in extension BIG-REQUESTS
    [ 48.116] Initializing built-in extension SYNC
    [ 48.116] Initializing built-in extension XKEYBOARD
    [ 48.116] Initializing built-in extension XC-MISC
    [ 48.116] Initializing built-in extension SECURITY
    [ 48.116] Initializing built-in extension XINERAMA
    [ 48.116] Initializing built-in extension XFIXES
    [ 48.116] Initializing built-in extension RENDER
    [ 48.116] Initializing built-in extension RANDR
    [ 48.116] Initializing built-in extension COMPOSITE
    [ 48.116] Initializing built-in extension DAMAGE
    [ 48.117] Initializing built-in extension MIT-SCREEN-SAVER
    [ 48.117] Initializing built-in extension DOUBLE-BUFFER
    [ 48.118] Initializing built-in extension RECORD
    [ 48.118] Initializing built-in extension DPMS
    [ 48.119] Initializing built-in extension X-Resource
    [ 48.119] Initializing built-in extension XVideo
    [ 48.120] Initializing built-in extension XVideo-MotionCompensation
    [ 48.121] Initializing built-in extension XFree86-VidModeExtension
    [ 48.121] Initializing built-in extension XFree86-DGA
    [ 48.122] Initializing built-in extension XFree86-DRI
    [ 48.122] Initializing built-in extension DRI2
    [ 48.122] (II) "glx" will be loaded by default.
    [ 48.122] (II) LoadModule: "glx"
    [ 48.122] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 48.122] (II) Module glx: vendor="Advanced Micro Devices, Inc."
    [ 48.122] compiled for 6.9.0, module version = 1.0.0
    [ 48.123] Loading extension GLX
    [ 48.123] (II) LoadModule: "fglrx"
    [ 48.123] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
    [ 48.132] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
    [ 48.132] compiled for 1.4.99.906, module version = 9.1.11
    [ 48.132] Module class: X.Org Video Driver
    [ 48.132] (II) Loading sub module "fglrxdrm"
    [ 48.132] (II) LoadModule: "fglrxdrm"
    [ 48.132] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 48.133] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 48.133] compiled for 1.4.99.906, module version = 9.1.11
    [ 48.133] (II) AMD Proprietary Linux Driver Version Identifier:9.01.11
    [ 48.133] (II) AMD Proprietary Linux Driver Release Identifier: 9.012
    [ 48.133] (II) AMD Proprietary Linux Driver Build Date: Dec 19 2012 14:41:10
    [ 48.133] (++) using VT number 2
    [ 48.133] (WW) Falling back to old probe method for fglrx
    [ 48.136] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
    [ 48.137] ukiDynamicMajor: failed to open /proc/ati/major
    [ 48.137] ukiDynamicMajor: failed to open /proc/ati/major
    [ 48.138] (--) Chipset Supported AMD Graphics Processor (0x6840) found
    [ 48.138] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
    [ 48.139] (II) AMD Video driver is running on a device belonging to a group targeted for this release
    [ 48.139] (II) AMD Video driver is signed
    [ 48.139] (II) fglrx(0): pEnt->device->identifier=0x102fb40
    [ 48.140] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === begin
    [ 48.140] (II) Loading sub module "vgahw"
    [ 48.140] (II) LoadModule: "vgahw"
    [ 48.140] (II) Loading /usr/lib/xorg/modules/libvgahw.so
    [ 48.140] (II) Module vgahw: vendor="X.Org Foundation"
    [ 48.140] compiled for 1.13.2, module version = 0.1.0
    [ 48.140] ABI class: X.Org Video Driver, version 13.1
    [ 48.140] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    [ 48.140] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    [ 48.140] (==) fglrx(0): Default visual is TrueColor
    [ 48.140] (**) fglrx(0): Option "DPMS" "true"
    [ 48.140] (==) fglrx(0): RGB weight 888
    [ 48.140] (II) fglrx(0): Using 8 bits per RGB
    [ 48.141] (==) fglrx(0): Buffer Tiling is ON
    [ 48.141] (II) Loading sub module "fglrxdrm"
    [ 48.141] (II) LoadModule: "fglrxdrm"
    [ 48.141] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
    [ 48.141] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
    [ 48.141] compiled for 1.4.99.906, module version = 9.1.11
    [ 48.142] ukiDynamicMajor: failed to open /proc/ati/major
    [ 48.142] ukiDynamicMajor: failed to open /proc/ati/major
    [ 48.143] (**) fglrx(0): NoAccel = NO
    [ 48.143] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
    [ 48.143] (--) fglrx(0): Chipset: "AMD Radeon HD 7600M Series" (Chipset = 0x6840)
    [ 48.143] (--) fglrx(0): (PciSubVendor = 0x1179, PciSubDevice = 0xfb22)
    [ 48.143] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
    [ 48.143] (--) fglrx(0): Linear framebuffer (phys) at 0xb0000000
    [ 48.143] (--) fglrx(0): MMIO registers at 0xc0000000
    [ 48.143] (--) fglrx(0): I/O port at 0x00003000
    [ 48.143] (==) fglrx(0): ROM-BIOS at 0x000c0000
    [ 48.147] (EE) fglrx(0): V_BIOS address 0x0 out of range
    [ 48.147] (II) fglrx(0): Invalid ATI BIOS from int10, the adapter is not VGA-enabled
    [ 48.147] (EE) fglrx(0): Invalid video BIOS signature!
    [ 48.147] (EE) fglrx(0): GetBIOSParameter failed
    [ 48.147] (EE) fglrx(0): PreInitAdapter failed
    [ 48.147] (EE) fglrx(0): PreInit failed
    [ 48.147] (II) fglrx(0): === [xdl_xs113_atiddxPreInit] === end
    [ 48.149] (II) UnloadModule: "fglrx"
    [ 48.150] (II) UnloadSubModule: "fglrxdrm"
    [ 48.150] (II) Unloading fglrxdrm
    [ 48.150] (II) UnloadSubModule: "vgahw"
    [ 48.150] (II) Unloading vgahw
    [ 48.150] (II) UnloadSubModule: "fglrxdrm"
    [ 48.150] (EE) Screen(s) found, but none have a usable configuration.
    [ 48.150]
    Fatal server error:
    [ 48.150] no screens found
    [ 48.150] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 48.150] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [ 48.150] (EE)
    [ 48.157] Server terminated with error (1). Closing log file.
    xorg.conf:   
    Section "ServerLayout"
    Identifier "aticonfig Layout"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    EndSection
    Section "Module"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:1:0:0"
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    And "fglrxinfo" gives me "Error: unable to open display (null)"
    Any help would be much appreciated!
    Last edited by mjb (2013-02-08 15:41:16)

    Yes I did, but it didn't help.
    I solved the problem now, but it was rather complicated and is only a workaround. If anyone is having the same problem:
    1) I installed the open source drivers and enabled KMS
    2) I copied the efi shell from the arch boot disk to the rEFInd folder
    3) Now everytime I start my laptop I have to start the EFI-Shell (v1) first. This somehow changes the resolution. I exit the shell and start arch. X works.
    I have no idea why this works, but it is the only thing that does. If anyone knows what this means, I'd appreciate your help.
    By the way: Step 3 also solves this issue

  • [SOLVED]Graphical environment doesn't start on boot

    Hi,
    I've tried to change default boot target to graphical, but it doesn't work. I use grub so I tried to edit
    /etc/default/grub
    GRUB_DEFAULT=2
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet systemd.unit=graphical.target"
    GRUB_CMDLINE_LINUX=""
    It didn't change anything, so I tried to use
    systemctl set-default -f graphical.target
    But it's not working either. What am I doing wrong? Or what am I missing?
    I know that simple workaround is starting X after log in to console, but I don't want this.
    Last edited by blady (2014-05-10 09:14:16)

    If you don't wan't to use a DM: Start X at Login and Automatic login to virtual console. Then set multi-user as default target.
    Last edited by Ziusudra (2014-05-10 06:58:21)

  • [SOLVED] X server doesn't start correctly: Connection to X server lost

    I was trying to configure wine on my x64 system and suddenly X shutted down. There is nothing helpful in xinit output, only line "xinit: connection to X server lost". I've got nVidia GeForce 9800 GT, and i'm using nvidia driver. I tried using nouveau, nv and completely reinstalling system from scratch, but nothing helped, I still get the same error.
    Here is my /etc/X11/xorg.conf.d/10-monitor : http://paste.pocoo.org/show/297106/
    /var/log/Xorg.0.log : http://paste.pocoo.org/show/297107/
    Please, help.
    Last edited by blin (2010-12-05 08:22:50)

    After some experimentation I've found that I can start X as root.
    Here is Xorg.log as i run X as root: http://paste.pocoo.org/show/299430/
    And here is Xorg.log as i run X as normal user: http://paste.pocoo.org/show/299431/
    The only difference that i can see is "Power Button: Close" when running as normal user. I think that there could be some relation to recent udev update.
    Any ideas?

  • [Solved] X-server doesn't start...

    Hi.  After installing the latest Arch about 4 times, I've run out of ideas.  I'm installing on an old pc that has on-board AGP graphics, Aladdin TNT2.  With a wired network connection, I have installed Xorg, Nouveau, Vesa & NV drivers, along with Fluxbox, but it boots to a login prompt.  Since there is no xorg.conf, I tried running 'X -configure' but am told something like "the 2 screens configured don't match the 1 screen detected', so no xorg.conf is created.  So I copied&pasted one from the net from someone who also had a TNT2 card, and tried running X after altered the xorg.conf "Driver" entry.  With both 'vesa' and 'nv' I am treated to a black screen and on interrupting it, see a line saying "error setting MTRR".  Using 'nouveau' in xorg.conf there is no attempt to start, I am instantly presented with a message saying that there was no device detected.
    I have searched & found a few people here that had identical problems to what I am describing,  but unfortunately these posts were of little help to me.  There is one about 'xinitrc' being a likely culprit but I don't even seem to have this  - is there something additional I need to install for this?  I tried creating a text file with a "fluxbox" entry but it didn't have any effect.  What is bizarre (to me) about all this is that I have never come across ANY Linux that has ever had a problem starting an X-server on this pc, so I'm now convinced that it's not a driver issue at all...
    Before I forget, there seems to be a nasty bug in the installation process - after you select your packages, if any have dependency issues (in my case, it was something to do with 'curl') you are immediately 'failed' when you select to install them, even though on-screen it is giving you the option to skip the offending packages, in actuality the "y/N" choice given defaults to 'NO' and you are not even given the option 'cos it goes straight to 'continue' with no chance of any user-input!  I rate this as 'nasty' 'cos after I had spent almost 40min picking my list of packages from the huge package-list, I then had no option but to go through the entire process again, leaving out the packages that caused the problem!  Surely there must be a way of re-doing this without it having it forget all the already-selected packages?
    Last edited by omelette (2011-09-16 23:25:09)

    I'm starting to realise just how little I know about Linux despite having used other distros for about 5 years now - my problem was caused by not having had a desktop-manager installed   It also highlights the difference between using something, and understanding how it operates!
    For anyone stumbling across this with a similar problem, I just installed xorg-xdm - pacman -S xorg-xdm
    That said, with a skeleton-Fluxbox finally running, it's pretty much non-functional - lots of more stuff to install/figure out!  I must say though, the Arch documentation is excellent, once you can find what you're looking for.

  • [SOLVED] syslog-ng doesn`t start,Permission denied (13)

    Hello,
    I have a new HDD. I have copied the system to the new disk.
    Everything seems OK. Syslog does not start.
    Starting Syslog-NG [BUSY] Error opening configuration file; filename='/etc/syslog-ng/syslog-ng.conf', error='Permission denied (13)'
    I have tried chmod 666,777 .
    Reinstalling syslog-ng.
    Formating and copying the system again
    I`m confused.
    Any idea what should be the problem.
    Last edited by mezcal (2011-08-11 13:31:56)

    thanks.
    Permissions are same as on my working laptop.
    [root@wsf ~]# ls -ld /etc
    drwxr-xr-x 79 root root 4096 11. srp 06.42 /etc
    [root@wsf ~]# ls -ld /etc/syslog-ng
    drwxr-xr-x 3 root root 4096 10. srp 22.15 /etc/syslog-ng
    [root@wsf ~]# ls -l /etc/syslog-ng/syslog-ng.conf
    -rw-r--r-- 1 root root 3674 13. čec 05.01 /etc/syslog-ng/syslog-ng.conf
    [root@wsf ~]# ls -ld /tmp
    drwxrwxrwt 13 root root 4096 11. srp 06.52 /tmp

  • [SOLVED] cinnamon-settings doesn't start (segmentation fault)

    Hi
    I cannot start cinnamon-settings anymore, I get a segmentation fault error.
    Here's the output of gdb:
    Starting program: /usr/bin/python2 /usr/bin/cinnamon-settings
    Got object file from memory but can't read symbols: File truncated.
    warning: Could not load shared library symbols for linux-vdso.so.1.
    Do you need "set solib-search-path" or "set sysroot"?
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    process 1430 is executing new program: /usr/bin/python2.7
    warning: Could not load shared library symbols for linux-vdso.so.1.
    Do you need "set solib-search-path" or "set sysroot"?
    [Thread debugging using libthread_db enabled]
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    [New Thread 0x7fffe97ee700 (LWP 1434)]
    Error while mapping shared library sections:
    `/usr/lib/python2.7/site-packages/PIL/_imaging.so': not in executable format: File format not recognized
    Program received signal SIGSEGV, Segmentation fault.
    0x00007ffff7a9314b in PyModule_GetDict () from /usr/lib/libpython2.7.so.1.0
    (gdb) bt
    #0 0x00007ffff7a9314b in PyModule_GetDict () from /usr/lib/libpython2.7.so.1.0
    #1 0x00007fffe1ddc68e in ?? ()
    #2 0x0000000000c1e310 in ?? ()
    #3 0x00007ffff7dd5058 in extensions () from /usr/lib/libpython2.7.so.1.0
    #4 0x0000000000c1e310 in ?? ()
    #5 0x00007ffff7b03807 in _PyImport_LoadDynamicModule ()
    from /usr/lib/libpython2.7.so.1.0
    #6 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
    #7 0x00007ffff7b01dc6 in ensure_fromlist () from /usr/lib/libpython2.7.so.1.0
    #8 0x00007ffff7b02615 in PyImport_ImportModuleLevel ()
    from /usr/lib/libpython2.7.so.1.0
    #9 0x00007ffff7ae7d48 in builtin___import__ ()
    from /usr/lib/libpython2.7.so.1.0
    #10 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
    #11 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
    from /usr/lib/libpython2.7.so.1.0
    #12 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
    from /usr/lib/libpython2.7.so.1.0
    #13 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
    from /usr/lib/libpython2.7.so.1.0
    #14 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
    #15 0x00007ffff7b009b9 in PyImport_ExecCodeModuleEx ()
    from /usr/lib/libpython2.7.so.1.0
    ---Type <return> to continue, or q <return> to quit---
    #16 0x00007ffff7b00c33 in load_source_module ()
    from /usr/lib/libpython2.7.so.1.0
    #17 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
    #18 0x00007ffff7b01dc6 in ensure_fromlist () from /usr/lib/libpython2.7.so.1.0
    #19 0x00007ffff7b02615 in PyImport_ImportModuleLevel ()
    from /usr/lib/libpython2.7.so.1.0
    #20 0x00007ffff7ae7d48 in builtin___import__ ()
    from /usr/lib/libpython2.7.so.1.0
    #21 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
    #22 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
    from /usr/lib/libpython2.7.so.1.0
    #23 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
    from /usr/lib/libpython2.7.so.1.0
    #24 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
    from /usr/lib/libpython2.7.so.1.0
    #25 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
    #26 0x00007ffff7b009b9 in PyImport_ExecCodeModuleEx ()
    from /usr/lib/libpython2.7.so.1.0
    #27 0x00007ffff7b00c33 in load_source_module ()
    from /usr/lib/libpython2.7.so.1.0
    #28 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
    #29 0x00007ffff7b01b1f in load_next () from /usr/lib/libpython2.7.so.1.0
    #30 0x00007ffff7b024fe in PyImport_ImportModuleLevel ()
    ---Type <return> to continue, or q <return> to quit---
    from /usr/lib/libpython2.7.so.1.0
    #31 0x00007ffff7ae7d48 in builtin___import__ ()
    from /usr/lib/libpython2.7.so.1.0
    #32 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
    #33 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
    from /usr/lib/libpython2.7.so.1.0
    #34 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
    from /usr/lib/libpython2.7.so.1.0
    #35 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
    from /usr/lib/libpython2.7.so.1.0
    #36 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
    #37 0x00007ffff7b009b9 in PyImport_ExecCodeModuleEx ()
    from /usr/lib/libpython2.7.so.1.0
    #38 0x00007ffff7b00c33 in load_source_module ()
    from /usr/lib/libpython2.7.so.1.0
    #39 0x00007ffff7b018a1 in import_submodule () from /usr/lib/libpython2.7.so.1.0
    #40 0x00007ffff7b01b1f in load_next () from /usr/lib/libpython2.7.so.1.0
    #41 0x00007ffff7b024fe in PyImport_ImportModuleLevel ()
    from /usr/lib/libpython2.7.so.1.0
    #42 0x00007ffff7ae7d48 in builtin___import__ ()
    from /usr/lib/libpython2.7.so.1.0
    #43 0x00007ffff7a58773 in PyObject_Call () from /usr/lib/libpython2.7.so.1.0
    #44 0x00007ffff7ae9a87 in PyEval_CallObjectWithKeywords ()
    ---Type <return> to continue, or q <return> to quit---
    from /usr/lib/libpython2.7.so.1.0
    #45 0x00007ffff7aecc96 in PyEval_EvalFrameEx ()
    from /usr/lib/libpython2.7.so.1.0
    #46 0x00007ffff7af0a90 in PyEval_EvalCodeEx ()
    from /usr/lib/libpython2.7.so.1.0
    #47 0x00007ffff7af0b89 in PyEval_EvalCode () from /usr/lib/libpython2.7.so.1.0
    #48 0x00007ffff7b09fef in run_mod () from /usr/lib/libpython2.7.so.1.0
    #49 0x00007ffff7b0b212 in PyRun_FileExFlags ()
    from /usr/lib/libpython2.7.so.1.0
    #50 0x00007ffff7b0c427 in PyRun_SimpleFileExFlags ()
    from /usr/lib/libpython2.7.so.1.0
    #51 0x00007ffff7b1d7ca in Py_Main () from /usr/lib/libpython2.7.so.1.0
    #52 0x00007ffff746f040 in __libc_start_main () from /usr/lib/libc.so.6
    #53 0x000000000040073e in _start ()
    (gdb)
    Thanks for any help!
    Last edited by arnaudm (2014-10-15 08:08:40)

    arnaudm wrote:
    The problem indeed came from _imaging.so, I reinstalled the package python2-pillow and everything works fine now.
    Thank you!
    Hey man,
    Sorry to be a pain but how did you figure out that it was 'python2-pillow' that needed reinstalling?
    I cant see anywhere in the log that explicitly  states a problem with python2-pillow?

Maybe you are looking for

  • How can I upload my music to the iTunes Store for others to Purchase

    I am the co-founder & webmaster for a small non-profit organization *"Dreams Fulfilled Through Music"*. We provide adaptive music education & music therapy services to children & adults w/ special needs. Our mission is to bring the joy making music t

  • Volumes and disks - how to create/use?

    Hi, Environment: x86. I've one Solaris system disk (80 GB) and two additional disks, one 250 GB and 80 GB. I'd like to use these two as one. I've created volume (RAID 0, first option in smc), with name d0. The size of the volume is ~310 GB. My questi

  • Query Repetition on Different Server Strangness

    Guys, We have a Dev and a UAT server that we are working with at the moment. On our dev server when I bring back a column called "Comparison Type" I get a distinct list. When I do the same on UAT I get repetition. The RPD on the 2 servers is identica

  • Value of the goods movement is negative in MIGO GRN doc cancellation

    Dear gurus, while doing GRN cancellation in MIGO i m facing the error like Value of the goods movement is negative:      Message no. M7301 Plz suggest me.

  • OS X Mail. Asks for password every time...

    Mail app, asks for an account password everytime I relaunch it, restart or reconnect to the internet. Only asks the password for whatever account is the bottom one in preferences. If i go to preferences and check the account info the password field i