[SOLVED]Complicated Xorg.conf
I'm trying to make a good xorg.conf.d directory for this configuration
My configuration
Ecran 1 (DVI) -- Ecran 2 (HDMI) - - Ecran 3 (VGA) -- Ecran 4 (DVI)
| | | |
|____________________________| |_______________________|
Card : Nvidia 9600GT Card : ATI
Resolution : Both 1920x1080 Resolution : Both 1280x1024
What I already tried
First
I found this link http://nouveau.freedesktop.org/wiki/MultiMonitorDesktop
And I tried this configuration
Section "ServerLayout"
Identifier "Layout0"
Option "Xinerama" "on"
Option "Clone" "off"
# You would need one screen for each monitor
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:01:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "DVI-I-1"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:01:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "HDMI-A-1"
Screen 1
EndSection
Section "Device"
Identifier "Device2"
Driver "radeon"
# Actual PCI location of second card/gpu
BusID "PCI:06:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "VGA-2"
Screen 0
EndSection
Section "Device"
Identifier "Device3"
Driver "radeon"
# Actual PCI location of second card/gpu
BusID "PCI:06:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "DVI-I-2"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device3"
EndSection
but I had this log
[ 2261.701]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 2261.701] X Protocol Version 11, Revision 0
[ 2261.701] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 2261.701] Current Operating System: Linux martin 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 2261.701] Kernel command line: root=/dev/sda3 ro quiet
[ 2261.701] Build Date: 30 May 2012 07:24:13PM
[ 2261.701]
[ 2261.701] Current version of pixman: 0.26.0
[ 2261.701] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2261.701] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2261.701] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 11 01:02:17 2012
[ 2261.701] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2261.701] (==) ServerLayout "Layout0"
[ 2261.701] (**) |-->Screen "Screen0" (0)
[ 2261.701] (**) | |-->Monitor "<default monitor>"
[ 2261.701] (**) | |-->Device "Device0"
[ 2261.701] (==) No monitor specified for screen "Screen0".
Using a default monitor configuration.
[ 2261.701] (**) |-->Screen "Screen1" (1)
[ 2261.701] (**) | |-->Monitor "<default monitor>"
[ 2261.701] (**) | |-->Device "Device1"
[ 2261.701] (==) No monitor specified for screen "Screen1".
Using a default monitor configuration.
[ 2261.701] (**) |-->Screen "Screen2" (2)
[ 2261.701] (**) | |-->Monitor "<default monitor>"
[ 2261.702] (**) | |-->Device "Device2"
[ 2261.702] (==) No monitor specified for screen "Screen2".
Using a default monitor configuration.
[ 2261.702] (**) |-->Screen "Screen3" (3)
[ 2261.702] (**) | |-->Monitor "<default monitor>"
[ 2261.702] (**) | |-->Device "Device3"
[ 2261.702] (==) No monitor specified for screen "Screen3".
Using a default monitor configuration.
[ 2261.702] (**) Option "Xinerama" "on"
[ 2261.702] (==) Automatically adding devices
[ 2261.702] (==) Automatically enabling devices
[ 2261.702] (**) Xinerama: enabled
[ 2261.702] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2261.702] Entry deleted from font path.
[ 2261.702] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2261.702] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2261.702] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2261.702] (II) Loader magic: 0x7c58e0
[ 2261.702] (II) Module ABI versions:
[ 2261.702] X.Org ANSI C Emulation: 0.4
[ 2261.702] X.Org Video Driver: 12.0
[ 2261.702] X.Org XInput driver : 16.0
[ 2261.702] X.Org Server Extension : 6.0
[ 2261.703] (--) PCI:*(0:1:0:0) 10de:0622:1458:34d2 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/536870912, 0xf4000000/33554432, I/O @ 0x0000ac00/128, BIOS @ 0x????????/524288
[ 2261.703] (--) PCI: (0:6:0:0) 1002:5b64:1002:0102 rev 128, Mem @ 0xe8000000/134217728, 0xf7ee0000/65536, I/O @ 0x0000d000/256, BIOS @ 0x????????/131072
[ 2261.703] (--) PCI: (0:6:0:1) 1002:5b74:1002:0103 rev 128, Mem @ 0xf7ef0000/65536
[ 2261.703] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2261.703] (II) LoadModule: "extmod"
[ 2261.703] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 2261.703] (II) Module extmod: vendor="X.Org Foundation"
[ 2261.703] compiled for 1.12.2, module version = 1.0.0
[ 2261.703] Module class: X.Org Server Extension
[ 2261.703] ABI class: X.Org Server Extension, version 6.0
[ 2261.703] (II) Loading extension MIT-SCREEN-SAVER
[ 2261.703] (II) Loading extension XFree86-VidModeExtension
[ 2261.703] (II) Loading extension XFree86-DGA
[ 2261.703] (II) Loading extension DPMS
[ 2261.703] (II) Loading extension XVideo
[ 2261.703] (II) Loading extension XVideo-MotionCompensation
[ 2261.703] (II) Loading extension X-Resource
[ 2261.703] (II) LoadModule: "dbe"
[ 2261.703] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 2261.703] (II) Module dbe: vendor="X.Org Foundation"
[ 2261.703] compiled for 1.12.2, module version = 1.0.0
[ 2261.703] Module class: X.Org Server Extension
[ 2261.703] ABI class: X.Org Server Extension, version 6.0
[ 2261.704] (II) Loading extension DOUBLE-BUFFER
[ 2261.704] (II) LoadModule: "glx"
[ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2261.704] (II) Module glx: vendor="X.Org Foundation"
[ 2261.704] compiled for 1.12.2, module version = 1.0.0
[ 2261.704] ABI class: X.Org Server Extension, version 6.0
[ 2261.704] (==) AIGLX enabled
[ 2261.704] (II) Loading extension GLX
[ 2261.704] (II) LoadModule: "record"
[ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 2261.704] (II) Module record: vendor="X.Org Foundation"
[ 2261.704] compiled for 1.12.2, module version = 1.13.0
[ 2261.704] Module class: X.Org Server Extension
[ 2261.704] ABI class: X.Org Server Extension, version 6.0
[ 2261.704] (II) Loading extension RECORD
[ 2261.704] (II) LoadModule: "dri"
[ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2261.704] (II) Module dri: vendor="X.Org Foundation"
[ 2261.704] compiled for 1.12.2, module version = 1.0.0
[ 2261.704] ABI class: X.Org Server Extension, version 6.0
[ 2261.704] (II) Loading extension XFree86-DRI
[ 2261.704] (II) LoadModule: "dri2"
[ 2261.704] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 2261.704] (II) Module dri2: vendor="X.Org Foundation"
[ 2261.704] compiled for 1.12.2, module version = 1.2.0
[ 2261.704] ABI class: X.Org Server Extension, version 6.0
[ 2261.704] (II) Loading extension DRI2
[ 2261.704] (II) LoadModule: "nouveau"
[ 2261.704] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 2261.705] (II) Module nouveau: vendor="X.Org Foundation"
[ 2261.705] compiled for 1.12.1.902, module version = 0.0.16
[ 2261.705] Module class: X.Org Video Driver
[ 2261.705] ABI class: X.Org Video Driver, version 12.0
[ 2261.705] (II) LoadModule: "radeon"
[ 2261.705] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2261.705] (II) Module radeon: vendor="X.Org Foundation"
[ 2261.705] compiled for 1.12.1.902, module version = 6.14.99
[ 2261.705] Module class: X.Org Video Driver
[ 2261.705] ABI class: X.Org Video Driver, version 12.0
[ 2261.705] (II) NOUVEAU driver
[ 2261.705] (II) NOUVEAU driver for NVIDIA chipset families :
[ 2261.705] RIVA TNT (NV04)
[ 2261.705] RIVA TNT2 (NV05)
[ 2261.705] GeForce 256 (NV10)
[ 2261.705] GeForce 2 (NV11, NV15)
[ 2261.705] GeForce 4MX (NV17, NV18)
[ 2261.705] GeForce 3 (NV20)
[ 2261.705] GeForce 4Ti (NV25, NV28)
[ 2261.705] GeForce FX (NV3x)
[ 2261.705] GeForce 6 (NV4x)
[ 2261.705] GeForce 7 (G7x)
[ 2261.705] GeForce 8 (G8x)
[ 2261.705] GeForce GTX 200 (NVA0)
[ 2261.705] GeForce GTX 400 (NVC0)
[ 2261.705] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA
[ 2261.708] (--) using VT number 8
[ 2261.710] drmOpenDevice: node name is /dev/dri/card0
[ 2261.710] drmOpenDevice: open result is 7, (OK)
[ 2261.710] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 2261.710] drmOpenDevice: node name is /dev/dri/card0
[ 2261.710] drmOpenDevice: open result is 7, (OK)
[ 2261.710] drmOpenByBusid: drmOpenMinor returns 7
[ 2261.710] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 2261.710] (II) [drm] nouveau interface version: 0.0.16
[ 2261.710] drmOpenDevice: node name is /dev/dri/card0
[ 2261.710] drmOpenDevice: open result is 7, (OK)
[ 2261.710] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 2261.710] drmOpenDevice: node name is /dev/dri/card0
[ 2261.710] drmOpenDevice: open result is 7, (OK)
[ 2261.710] drmOpenByBusid: drmOpenMinor returns 7
[ 2261.710] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 2261.710] (II) [drm] nouveau interface version: 0.0.16
[ 2261.710] (II) [KMS] Kernel modesetting enabled.
[ 2261.710] (II) [KMS] Kernel modesetting enabled.
[ 2261.710] (II) Loading sub module "dri"
[ 2261.710] (II) LoadModule: "dri"
[ 2261.710] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2261.710] (II) Module dri: vendor="X.Org Foundation"
[ 2261.710] compiled for 1.12.2, module version = 1.0.0
[ 2261.710] ABI class: X.Org Server Extension, version 6.0
[ 2261.710] (II) NOUVEAU(0): Loaded DRI module
[ 2261.710] drmOpenDevice: node name is /dev/dri/card0
[ 2261.710] drmOpenDevice: open result is 8, (OK)
[ 2261.710] drmOpenDevice: node name is /dev/dri/card0
[ 2261.710] drmOpenDevice: open result is 8, (OK)
[ 2261.710] drmOpenByBusid: Searching for BusID pci:0000:01:00.0
[ 2261.710] drmOpenDevice: node name is /dev/dri/card0
[ 2261.710] drmOpenDevice: open result is 8, (OK)
[ 2261.710] drmOpenByBusid: drmOpenMinor returns 8
[ 2261.710] drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
[ 2261.710] (II) [drm] DRM interface version 1.4
[ 2261.710] (II) [drm] DRM open master succeeded.
[ 2261.710] (--) NOUVEAU(0): Chipset: "NVIDIA NV94"
[ 2261.710] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 2261.710] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 2261.710] (==) NOUVEAU(0): RGB weight 888
[ 2261.710] (==) NOUVEAU(0): Default visual is TrueColor
[ 2261.710] (**) NOUVEAU(0): Option "ZaphodHeads" "DVI-I-1"
[ 2261.710] (==) NOUVEAU(0): Using HW cursor
[ 2261.710] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 2261.710] (==) NOUVEAU(0): Page flipping enabled
[ 2261.710] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 2261.781] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 2261.942] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 2261.942] (II) NOUVEAU(0): Manufacturer: IVM Model: 560c Serial#: 2768
[ 2261.942] (II) NOUVEAU(0): Year: 2010 Week: 39
[ 2261.942] (II) NOUVEAU(0): EDID Version: 1.3
[ 2261.942] (II) NOUVEAU(0): Digital Display Input
[ 2261.942] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 52 vert.: 29
[ 2261.942] (II) NOUVEAU(0): Gamma: 2.20
[ 2261.942] (II) NOUVEAU(0): DPMS capabilities: Off
[ 2261.942] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 2261.942] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 2261.942] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
[ 2261.942] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 2261.942] (II) NOUVEAU(0): Supported established timings:
[ 2261.942] (II) NOUVEAU(0): 720x400@70Hz
[ 2261.942] (II) NOUVEAU(0): 640x480@60Hz
[ 2261.942] (II) NOUVEAU(0): 640x480@67Hz
[ 2261.942] (II) NOUVEAU(0): 640x480@72Hz
[ 2261.942] (II) NOUVEAU(0): 640x480@75Hz
[ 2261.942] (II) NOUVEAU(0): 800x600@56Hz
[ 2261.942] (II) NOUVEAU(0): 800x600@60Hz
[ 2261.942] (II) NOUVEAU(0): 800x600@72Hz
[ 2261.942] (II) NOUVEAU(0): 800x600@75Hz
[ 2261.942] (II) NOUVEAU(0): 832x624@75Hz
[ 2261.942] (II) NOUVEAU(0): 1024x768@60Hz
[ 2261.942] (II) NOUVEAU(0): 1024x768@70Hz
[ 2261.942] (II) NOUVEAU(0): 1024x768@75Hz
[ 2261.942] (II) NOUVEAU(0): 1280x1024@75Hz
[ 2261.942] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 2261.942] (II) NOUVEAU(0): Supported standard timings:
[ 2261.942] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2261.942] (II) NOUVEAU(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 2261.942] (II) NOUVEAU(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 2261.942] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2261.942] (II) NOUVEAU(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 2261.942] (II) NOUVEAU(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
[ 2261.942] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 2261.942] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 2261.942] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 2261.942] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 2261.942] (II) NOUVEAU(0): Monitor name: PL2409HD
[ 2261.942] (II) NOUVEAU(0): Serial No: 11077M0902768
[ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
[ 2261.942] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 2261.942] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 2261.942] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
[ 2261.942] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 2261.942] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 2261.942] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
[ 2261.942] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 521 x 293 mm
[ 2261.942] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 2261.942] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 2261.942] (II) NOUVEAU(0): Supported detailed timing:
[ 2261.942] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 521 x 293 mm
[ 2261.942] (II) NOUVEAU(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 2261.942] (II) NOUVEAU(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 2261.942] (II) NOUVEAU(0): Number of EDID sections to follow: 1
[ 2261.942] (II) NOUVEAU(0): EDID (in hex):
[ 2261.942] (II) NOUVEAU(0): 00ffffffffffff0026cd0c56d00a0000
[ 2261.942] (II) NOUVEAU(0): 2714010380341d782a6041a6564a9c25
[ 2261.942] (II) NOUVEAU(0): 125054bfef0081808140714f9500950f
[ 2261.942] (II) NOUVEAU(0): b30001010101023a801871382d40582c
[ 2261.942] (II) NOUVEAU(0): 450009252100001e000000fd00384c1e
[ 2261.942] (II) NOUVEAU(0): 5311000a202020202020000000fc0050
[ 2261.942] (II) NOUVEAU(0): 4c3234303948440a20202020000000ff
[ 2261.942] (II) NOUVEAU(0): 0031313037374d303930323736380180
[ 2261.942] (II) NOUVEAU(0): EDID vendor "IVM", prod id 22028
[ 2261.942] (II) NOUVEAU(0): Using EDID range info for horizontal sync
[ 2261.942] (II) NOUVEAU(0): Using EDID range info for vertical refresh
[ 2261.942] (II) NOUVEAU(0): Printing DDC gathered Modelines:
[ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 2261.942] (II) NOUVEAU(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080"x0.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[ 2261.942] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 2261.942] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 2261.942] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2261.942] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2261.943] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2261.943] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 2261.943] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 2261.943] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 2261.943] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2261.943] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1440x900": 136.8 MHz (scaled from 0.0 MHz), 70.6 kHz, 75.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 59.9 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1440x576": 54.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1440x576"x50.0 54.00 1440 1464 1592 1728 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "720x576": 27.0 MHz (scaled from 0.0 MHz), 31.2 kHz, 50.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "720x480": 27.0 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2261.943] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 2261.943] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2261.943] (**) NOUVEAU(0): Display dimensions: (520, 290) mm
[ 2261.943] (**) NOUVEAU(0): DPI set to (93, 94)
[ 2261.943] (II) Loading sub module "fb"
[ 2261.943] (II) LoadModule: "fb"
[ 2261.943] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2261.943] (II) Module fb: vendor="X.Org Foundation"
[ 2261.943] compiled for 1.12.2, module version = 1.0.0
[ 2261.944] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2261.944] (II) Loading sub module "exa"
[ 2261.944] (II) LoadModule: "exa"
[ 2261.944] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2261.944] (II) Module exa: vendor="X.Org Foundation"
[ 2261.944] compiled for 1.12.2, module version = 2.5.0
[ 2261.944] ABI class: X.Org Video Driver, version 12.0
[ 2261.944] (II) Loading sub module "shadowfb"
[ 2261.944] (II) LoadModule: "shadowfb"
[ 2261.944] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 2261.944] (II) Module shadowfb: vendor="X.Org Foundation"
[ 2261.944] compiled for 1.12.2, module version = 1.0.0
[ 2261.944] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2261.944] (II) Loading sub module "dri"
[ 2261.944] (II) LoadModule: "dri"
[ 2261.944] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 2261.944] (II) Module dri: vendor="X.Org Foundation"
[ 2261.944] compiled for 1.12.2, module version = 1.0.0
[ 2261.944] ABI class: X.Org Server Extension, version 6.0
[ 2261.944] (II) NOUVEAU(1): Loaded DRI module
[ 2261.944] (--) NOUVEAU(1): Chipset: "NVIDIA NV94"
[ 2261.944] (II) NOUVEAU(1): Creating default Display subsection in Screen section
"Screen1" for depth/fbbpp 24/32
[ 2261.944] (==) NOUVEAU(1): Depth 24, (--) framebuffer bpp 32
[ 2261.944] (==) NOUVEAU(1): RGB weight 888
[ 2261.944] (==) NOUVEAU(1): Default visual is TrueColor
[ 2261.944] (**) NOUVEAU(1): Option "ZaphodHeads" "HDMI-A-1"
[ 2261.944] (==) NOUVEAU(1): Using HW cursor
[ 2261.944] (==) NOUVEAU(1): GLX sync to VBlank disabled.
[ 2261.944] (==) NOUVEAU(1): Page flipping enabled
[ 2261.944] (==) NOUVEAU(1): Swap limit set to 2 [Max allowed 2]
[ 2262.104] (WW) NOUVEAU(1): No outputs definitely connected, trying again...
[ 2262.104] (WW) NOUVEAU(1): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 2262.104] (II) NOUVEAU(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2262.104]
[ 2262.104] Backtrace:
[ 2262.104] 0: /usr/bin/X (xorg_backtrace+0x36) [0x55db86]
[ 2262.104] 1: /usr/bin/X (0x400000+0x1615b9) [0x5615b9]
[ 2262.104] 2: /lib/libpthread.so.0 (0x7f171091b000+0xf140) [0x7f171092a140]
[ 2262.104] 3: /usr/bin/X (xf86SetScrnInfoModes+0x275) [0x49f4e5]
[ 2262.105] 4: /usr/bin/X (xf86InitialConfiguration+0x1595) [0x4a2e45]
[ 2262.105] 5: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f170d9f7000+0x2556d) [0x7f170da1c56d]
[ 2262.105] 6: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f170d9f7000+0xf456) [0x7f170da06456]
[ 2262.105] 7: /usr/bin/X (InitOutput+0x8ba) [0x47206a]
[ 2262.105] 8: /usr/bin/X (0x400000+0x23066) [0x423066]
[ 2262.105] 9: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f170f7d3455]
[ 2262.105] 10: /usr/bin/X (0x400000+0x234dd) [0x4234dd]
[ 2262.105]
[ 2262.105] Segmentation fault at address (nil)
[ 2262.105]
Fatal server error:
[ 2262.105] Caught signal 11 (Segmentation fault). Server aborting
[ 2262.105]
[ 2262.105]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 2262.105] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 2262.105]
[ 2262.109] Server terminated with error (1). Closing log file.
I tried too without Xinerama but it didn't work.
Second
I tried this conf too
10-cards.conf
Section "Device"
Identifier "cartenvidia"
Driver "nouveau"
BusID "PCI:01:0:0"
EndSection
Section "Device"
Identifier "carteati"
Driver "radeon"
BusID "PCI:06:0:0"
EndSection
10-screen.conf
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Monitor"
Identifier "Monitor1"
EndSection
Section "Monitor"
Identifier "Monitor2"
EndSection
Section "Monitor"
Identifier "Monitor3"
EndSection
Section "Screen"
Identifier "Screen0"
Device "cartenvidia"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "cartenvidia"
Monitor "Monitor1"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "carteati"
Monitor "Monitor2"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "carteati"
Monitor "Monitor3"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
and 10-serverlayout.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Option "Xinerama" "0"
EndSection
And I succeed to make all the screens works but monitors on the same card was cloned.
I succeed to make them works with Arandr next to each others but I had a strange bug (because of Xinerama I think)
Well, I don't know what to do.. If somebody know how to make it works.. !
Thank you !
Last edited by shox (2012-06-22 17:53:45)
ConnorBehan,
With this file
Section "ServerLayout"
Identifier "Layout0"
Option "Xinerama" "off"
Option "Clone" "off"
# You would need one screen for each monitor
Screen 0 "Screen0"
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
EndSection
Section "Device"
Identifier "Device0"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:01:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "DVI-I-1"
Screen 0
EndSection
Section "Device"
Identifier "Device1"
Driver "nouveau"
# Actual PCI location of first card/gpu
BusID "PCI:01:0:0"
# Actual connector - as reported by /sys/class/drm/card0-xx
Option "ZaphodHeads" "HDMI-A-1"
Screen 1
EndSection
Section "Device"
Identifier "Device2"
Driver "radeon"
# Actual PCI location of second card/gpu
BusID "PCI:06:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "VGA-2"
Screen 2
EndSection
Section "Device"
Identifier "Device3"
Driver "radeon"
# Actual PCI location of second card/gpu
BusID "PCI:06:0:0"
# Actual connector - as reported by /sys/class/drm/card1-xx
Option "ZaphodHeads" "DVI-I-2"
Screen 3
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
EndSection
Section "Screen"
Identifier "Screen3"
Device "Device3"
EndSection
The X server don't run and I have this error at the end of my Xorg.0.log
[ 22245.809] (WW) NOUVEAU(1): No outputs definitely connected, trying again...
[ 22245.809] (WW) NOUVEAU(1): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 22245.809] (II) NOUVEAU(1): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 22245.809]
[ 22245.809] Backtrace:
[ 22245.809] 0: /usr/bin/X (xorg_backtrace+0x36) [0x55db86]
[ 22245.809] 1: /usr/bin/X (0x400000+0x1615b9) [0x5615b9]
[ 22245.809] 2: /lib/libpthread.so.0 (0x7f985710e000+0xf140) [0x7f985711d140]
[ 22245.809] 3: /usr/bin/X (xf86SetScrnInfoModes+0x275) [0x49f4e5]
[ 22245.809] 4: /usr/bin/X (xf86InitialConfiguration+0x1595) [0x4a2e45]
[ 22245.809] 5: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f98541ea000+0x25d8d) [0x7f985420fd8d]
[ 22245.809] 6: /usr/lib/xorg/modules/drivers/nouveau_drv.so (0x7f98541ea000+0xf6c7) [0x7f98541f96c7]
[ 22245.809] 7: /usr/bin/X (InitOutput+0x8ba) [0x47206a]
[ 22245.809] 8: /usr/bin/X (0x400000+0x23066) [0x423066]
[ 22245.809] 9: /lib/libc.so.6 (__libc_start_main+0xf5) [0x7f9855fc6455]
[ 22245.809] 10: /usr/bin/X (0x400000+0x234dd) [0x4234dd]
[ 22245.809]
[ 22245.809] Segmentation fault at address (nil)
[ 22245.809]
Fatal server error:
[ 22245.809] Caught signal 11 (Segmentation fault). Server aborting
[ 22245.809]
[ 22245.809]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 22245.809] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 22245.809]
[ 22245.813] Server terminated with error (1). Closing log file.
I don't understand the error.. Thanks for your help
EDIT : These lignes were wrong
Option "ZaphodHeads" "xxxx-x"
(and they was specific to the Nouveau driver), But now, How can I set the out of the cards for the monitors...?
Last edited by shox (2012-06-22 13:04:37)
Similar Messages
-
[SOLVED] Conditional xorg.conf, is possible?
I'd like to export an nfs archlinux installation to a couple of machines that boots via PXE.
Those machines have different graphic chips, and one of them needs some tweaks to the xorg.conf (s3) to play well.
What i done was to create and populate /etc/X11/xorg.conf.d/10-openchrome.conf with specific device options.
but having specified the driver to use in that file, now the other machines (with a mix of intel, nvidia and radeon) wont start Xorg anymore.
What i am asking is if there is a "legacy" way to perform the task of assigning different xorg.conf configuration depending on the gpu used or if i need to hack my installation to switch xorg.conf at boot time depending on the installed gpu.
Thanks for reading.
Last edited by kokoko3k (2014-10-13 12:21:42)No problem - I immediately remembered the same question coming up recently, but even being an active contributor to the thread it took me a little while to track it down. Be sure to see the revisions of the idea throughout that thread as different caveats were worked out.
-
[SOLVED] NVS280 Xorg.conf settings dual monitors
Hi,
I've spent the last few days pulling my hair out trying to get the correct drivers installed without causing a kernel panic which I think I have now managed to do. I installed the Nvidia96-xx from the AUR and xorg-server1.12. My problem is though that I can't figure out how to get the computer to recognise the 2nd monitor. When it is in cli before starting the desktop environment though X it displays the same on both screens. But when i startx or startxfce4 (the desktop environment i chose) the second screen just turns off leaving just the first on. Obviously I don't want it to display the same screen twice anyway but I honestly have no idea how to get dual desktop running.
I have the Nvidia Quadro NVS280 graphics card. If someone could tell me what I need to do to get this working that would be awesome I'll try paste my current xorg.config here. I did run the nvidia-xconfig which did generate the file but still
My xconfig file:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@swio-display-x64-suse91-02) Sat Sep 1 03:47:08 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30.0 - 110.0
VertRefresh 50.0 - 150.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1600x1200" "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection]
Last edited by FuSeD386 (2014-03-16 15:10:10)Thanks lol I didn't know that code thing with the posting I only signed up today hahaha.
I havn't tried the other drivers. I got it into my head that 96xx was the one that I needed. I originally setup using ubuntu and it told me that I needed 96-xx but after installing Xserver just crashed everytime. Honestly I always hated ubuntu so I did want to use Arch but at the time I was just trying to rush setup. Now I'm determined to get the setup I actually like. (Arch) lol.
Do you think it's worth starting again and trying the drivers in the repository? I did look into nouveau but it said that it wouldn't work if you had to use nomodeset to boot, which I do. Without it the screens just stay blank. Before I installed nvidia96-xx my pc would just reboot continuously without it. The only reason I'm using Xorg-server1.12 is because of the nvidia-96.
I'm fairly new to Arch tbh I have pieces of paper scattered across my desk with various commands written on them to remind me how to do basic things like copy files and install from the AUR. -
[SOLVED]Xorg.conf, mouse config problem
The Rapoo M765 mouse can not work properly under normal mouse configuration.
The mouse goes beyond controll when config as below:
hacksign@XSign [14:13:13] : ~
>> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
#Section "InputClass"
# Identifier "Mouse2"
# MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
# MatchIsPointer "yes"
# MatchDevicePath "/dev/input/event*"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Emulate3Buttons" "no"
# Option "Buttons" "7"
# Option "ButtonMapping" "1 2 3 6 7"
#EndSection
When there is no any configuration, the mouse can work abnormally. Movement and right/left click work fine, but I can not use scroll wheel,and the "go forward"&"go backward" mouse key can not work too.
(I know Option "ZAxisMapping" "4 5" is the configuration of scroll wheel emulation.)
The real problem is 'mouse beyond controll',the cursor goes crazyly on screen ....
I guess it is something wrong of ButtonMapping option. But when I tried to get button number from command xev,when scroll wheel scrolles, I get something below(the scroll wheel movement is identified as a key event~):
//left click
ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3766452, (135,143), root:(2287,595),
state 0x0, button 1, same_screen YES
ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3766588, (135,143), root:(2287,595),
state 0x100, button 1, same_screen YES
//right click
ButtonPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3767716, (135,143), root:(2287,595),
state 0x0, button 3, same_screen YES
ButtonRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3767852, (135,143), root:(2287,595),
state 0x400, button 3, same_screen YES
//mouse scroll, identified as keyboard event(?)
KeyRelease event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
state 0x0, keycode 123 (keysym 0x1008ff13, XF86AudioRaiseVolume), same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
KeyPress event, serial 34, synthetic NO, window 0x4a00001,
root 0x264, subw 0x0, time 3769332, (135,143), root:(2287,595),
state 0x0, keycode 122 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
here is some Information(I dont know why the mouse is identified as 'type:KEYBOARD'):
hacksign@XSign [14:55:03] : ~
>> xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ RAPOO RAPOO 2.4G Remote Mouse id=13 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=15 [slave pointer (2)]
⎜ ↳ TPPS/2 IBM TrackPoint id=16 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Video Bus id=7 [slave keyboard (3)]
↳ Sleep Button id=8 [slave keyboard (3)]
↳ Heng Yu Technology Poker Pro S id=9 [slave keyboard (3)]
↳ Heng Yu Technology Poker Pro S id=10 [slave keyboard (3)]
↳ Integrated Camera id=11 [slave keyboard (3)]
↳ RAPOO RAPOO 2.4G Remote Mouse id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=14 [slave keyboard (3)]
↳ ThinkPad Extra Buttons id=17 [slave keyboard (3)]
hacksign@XSign [14:55:06] : ~
>> xinput list-props 13
Device 'RAPOO RAPOO 2.4G Remote Mouse':
Device Enabled (142): 1
Coordinate Transformation Matrix (144): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (270): 0
Device Accel Constant Deceleration (271): 1.000000
Device Accel Adaptive Deceleration (272): 1.000000
Device Accel Velocity Scaling (273): 10.000000
Device Product ID (260): 9390, 8192
Device Node (261): "/dev/input/event8"
Evdev Axis Inversion (274): 0, 0
Evdev Axes Swap (276): 0
Axis Labels (277): "Rel X" (152), "Rel Y" (153), "Rel Horiz Wheel" (267), "Rel Dial" (268), "Rel Vert Wheel" (269)
Button Labels (278): "Button Left" (145), "Button Middle" (146), "Button Right" (147), "Button Wheel Up" (148), "Button Wheel Down" (149), "Button Horiz Wheel Left" (150), "Button Horiz Wheel Right" (151), "Button Side" (265), "Button Extra" (266), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263), "Button Unknown" (263)
Evdev Scrolling Distance (279): 1, 1, 1
Evdev Middle Button Emulation (280): 0
Evdev Middle Button Timeout (281): 50
Evdev Third Button Emulation (282): 0
Evdev Third Button Emulation Timeout (283): 1000
Evdev Third Button Emulation Button (284): 3
Evdev Third Button Emulation Threshold (285): 20
Evdev Wheel Emulation (286): 0
Evdev Wheel Emulation Axes (287): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (288): 10
Evdev Wheel Emulation Timeout (289): 200
Evdev Wheel Emulation Button (290): 4
Evdev Drag Lock Buttons (291): 0
hacksign@XSign [14:55:14] : ~
>> grep -i rapoo /var/log/Xorg.0.log
[ 29.102] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event7)
[ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.102] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 29.102] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 29.102] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
[ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 29.102] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 29.102] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 29.102] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
[ 29.103] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 29.103] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 29.103] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
[ 29.103] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 29.103] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
[ 29.103] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 29.103] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
[ 29.104] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
[ 29.104] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
[ 29.104] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
[ 29.104] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
hacksign@XSign [14:59:47] : ~
>> yaourt -Q|grep -i 'input-'
local/xf86-input-evdev-trackpoint 2.9.1-1
extra/xf86-input-keyboard 1.8.0-3 (xorg-drivers xorg)
extra/xf86-input-mouse 1.9.1-1 (xorg-drivers xorg)
extra/xf86-input-synaptics 1.8.1-1 (xorg-drivers xorg)
Last edited by Hacksign (2015-01-14 02:22:51)Thanks for reply !
change Driver 'mouse' to Driver 'evdev',solved cursor goes beyond controll problem.
but I still can not use scroll button and 'go forward'&'go backward' button.
(BTW:evdev_drv.so is from local/xf86-input-evdev-trackpoint, and local/xf86-input-evdev-trackpoint package is from AUR)
I think, maybe something wrong with my button number mapping, but I still can not get scroll button number with 'xev' command....
below is my configuration:
hacksign@XSign [17:15:19] : /var/log
>> cat /etc/X11/xorg.conf.d/50-mouse-acceleration.conf
Section "InputClass"
Identifier "Mouse2"
MatchProduct "RAPOO RAPOO 2.4G Remote Mouse"
MatchIsPointer "yes"
MatchDevicePath "/dev/input/event*"
Driver "evdev"
Option "Protocol" "auto"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
Option "Buttons" "9"
Option "ButtonMapping" "1 2 3 6 7 8 9 4 5"
EndSection
and here is Xorg.0.log
[ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 11357.287] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 11357.287] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 11357.287] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event7"
[ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 11357.287] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 11357.287] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 11357.287] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/0003:24AE:2000.0003/input/input8/event7"
[ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 12)
[ 11357.288] (**) Option "xkb_rules" "evdev"
[ 11357.288] (**) Option "xkb_model" "pc104"
[ 11357.288] (**) Option "xkb_layout" "us"
[ 11357.288] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/event8)
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev pointer catchall"
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "evdev keyboard catchall"
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: Applying InputClass "Mouse2"
[ 11357.288] (II) Using input driver 'evdev' for 'RAPOO RAPOO 2.4G Remote Mouse'
[ 11357.288] (**) RAPOO RAPOO 2.4G Remote Mouse: always reports core events
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: Device: "/dev/input/event8"
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: ButtonMapping '1 2 3 6 7 8 9 4 5'
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Vendor 0x24ae Product 0x2000
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found 9 mouse buttons
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found scroll wheel(s)
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found relative axes
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found x and y relative axes
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found absolute axes
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Forcing absolute x/y axes to exist.
[ 11357.288] (--) evdev: RAPOO RAPOO 2.4G Remote Mouse: Found keys
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as mouse
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Configuring as keyboard
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: Adding scrollwheel support
[ 11357.288] (**) Option "Emulate3Buttons" "no"
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: YAxisMapping: buttons 4 and 5
[ 11357.288] (**) evdev: RAPOO RAPOO 2.4G Remote Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 11357.288] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/0003:24AE:2000.0004/input/input9/event8"
[ 11357.288] (II) XINPUT: Adding extended input device "RAPOO RAPOO 2.4G Remote Mouse" (type: KEYBOARD, id 13)
[ 11357.288] (**) Option "xkb_rules" "evdev"
[ 11357.288] (**) Option "xkb_model" "pc104"
[ 11357.288] (**) Option "xkb_layout" "us"
[ 11357.288] (II) evdev: RAPOO RAPOO 2.4G Remote Mouse: initialized for relative axes.
[ 11357.288] (WW) evdev: RAPOO RAPOO 2.4G Remote Mouse: ignoring absolute axes.
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) keeping acceleration scheme 1
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration profile 0
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration factor: 2.000
[ 11357.289] (**) RAPOO RAPOO 2.4G Remote Mouse: (accel) acceleration threshold: 4
[ 11357.289] (II) config/udev: Adding input device RAPOO RAPOO 2.4G Remote Mouse (/dev/input/mouse0)
[ 11357.289] (II) No input driver specified, ignoring this device.
[ 11357.289] (II) This device may have been added with another device file.
olive wrote:In the config file you mentioned, all is commented; do you mean that you have problems when you have uncommented it? You should not use the mouse driver (old deprecated driver) but evdev. Try to remove xf86-input-mouse and xf86-input-keyboard (same as before, this is deprecated and handled by evdev) and remove also a "joystick" driver if you have it (I have had problem with it conflicting with the evdev driver).
Last edited by Hacksign (2015-01-13 09:27:06) -
[solved] [xorgserver 1.6.1] and the minimalist xorg.conf
Hello new xorgserver users
According to the recent xorgserver upgrade to 1.6.1 I've got blackscreen eachtime I started X. The only way to solve that problem (I'm driving a nvidia desktop) was to replace nvidia driver with xf86-video-nv and no use xorg.conf anymore (otherwise X crashes).
But ctrl+alt+backspace miss me
And I try to use a minimal xorg.conf with the only three lines :
Section "ServerFlags"
Option "DontZap" "false"
EndSection
X crashes on start, my Xorg.0.log :
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux archibald 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Apr 19 15:27:19 2009
(==) Using config file: "/etc/X11/xorg.conf"
Parse error on line 2 of section ServerFlags in file /etc/X11/xorg.conf
Unexpected EOF. Missing EndSection keyword?
(EE) Problem parsing the config file
(EE) Error parsing the config file
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor
some archers use this minimal xorg.conf. Why can't I ?
Last edited by frenchy (2009-04-19 15:51:35)Hy wonder
The wiki says "ServerFlags"...
Anyway, the ServerLayout give me (xorg.0.log) :
Parse error on line 2 of section ServerLayout in file /etc/X11/xorg.conf
Unexpected EOF. Missing EndSection keyword?
(EE) Problem parsing the config file
(EE) Error parsing the config file -
[SOLVED]xorg.conf, my screen doesn't fit on my screen
Hi, I've got everything set up & working well except for my screen. The desktop is too big for the monitor, about a third of it is hidden off the monitor to the bottom right. I've looked at the wiki and tried xrandr, but no dice. I'm using the VESA driver which has always worked ok in other distros. Actually the crunchbang splashscreen was like this, but otherwise it was normal. I tried the openchrome driver, got a blank screen. Searched other BBS too. I don't know the term for this problem to search for. The drivers off the VIA site are for older kernels, I'd rather just get it working with VESA, with a 1Ghz CPU I don't see myself doing much in 3D anyway.
$ xrandr
Screen 0: minimum 640 x 480, current 1280 x 1024, maximum 1280 x 1024
default connected 1280x1024+0+0 0mm x 0mm
1280x1024 0.0*
1024x768 0.0
800x600 0.0
640x480 0.0
xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "glx"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "vesa"
VendorName "VIA Technologies, Inc."
BoardName "CX700/VX700 [S3 UniChrome Pro]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here's my monitor specs:
http://www.samsung.com/ca/consumer/offi … fullspec=F
Just about everything else is working like a dream, I was hoping to get it all going without posting, but here we are. Thanks a lot for any help.
Last edited by stozi (2011-03-20 01:46:55)Solved it.
It was enough to remove the display mode 1280x1024 in all screen sections.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/cyrillic"
EndSection
Section "Module"
Load "dri"
Load "dbe"
Load "dri2"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
HorizSync 31.5 - 50.0
VertRefresh 40- 90
Option "UseEdidFreqs" "1"
Option "ReducedBlanking"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "PrintVGARegs" # [<bool>]
#Option "PrintTVRegs" # [<bool>]
#Option "I2CScan" # [<bool>]
#Option "VBEModes" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "ExaNoComposite" # [<bool>]
#Option "ExaScratchSize" # <i>
#Option "SWCursor" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoRAM" # <i>
#Option "ActiveDevice" # [<str>]
#Option "BusWidth" # [<str>]
#Option "Center" # [<bool>]
#Option "PanelSize" # [<str>]
#Option "ForcePanel" # [<bool>]
#Option "TVDotCrawl" # [<bool>]
#Option "TVDeflicker" # <i>
#Option "TVType" # [<str>]
#Option "TVOutput" # [<str>]
#Option "TVPort" # [<str>]
#Option "DisableVQ" # [<bool>]
#Option "DisableIRQ" # [<bool>]
#Option "EnableAGPDMA" # [<bool>]
#Option "NoAGPFor2D" # [<bool>]
#Option "NoXVDMA" # [<bool>]
#Option "VbeSaveRestore" # [<bool>]
#Option "DisableXvBWCheck" # [<bool>]
#Option "ModeSwitchMethod" # [<str>]
#Option "MaxDRIMem" # <i>
#Option "AGPMem" # <i>
Identifier "Card0"
Driver "openchrome"
VendorName "Unknown Vendor"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
Option "RenderAccel" "true"
Option "XaaNoOffscreenPixmaps" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
Subsection "Display"
Viewport 0 0
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubsection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection -
SOLVED: Created /etc/X11/xorg.conf, now system won't boot.
I was trying to solve an issue with display resolution not sticking and it was suggested to me that I create an /etc/X11/xorg.conf.
I created the file and put in the lines that I had in my .xprofile related to xrandr.
Now... my system will not boot. It appears to get hung up trying to detect my ethernet connection. I tried Ctrl-Alt-F1 to avoid X windowing, no dice.
What's more, my system rescue pen drive appears to have died. I still have my Arch install CD.
All I want to do is delete xorg.conf. My arch root is a logical volume so I have no idea how to mount it after I boot from the Arch install CD, or if I can even do this.
Update: So embarrassing, my mount command was wrong. Once I did something that looked like this:
mount /dev/VolGroup0/root /mnt/
I was able to get into /etc/X11 and delete xorg. conf. Rebooted and all appears well.
Last edited by testingwithfire (2014-06-02 01:36:07)For mounting LVM, this page should probably help: https://wiki.archlinux.org/index.php/LV … al_volumes
Once in, then it should be easy. -
[SOLVED]Please help me convert this xrandr script into a xorg.conf
Hi!
First of all, I hope this is posted in the right forum section.
My laptop is often connected to my tv when I'm at home, using only that screen. I have a xrandr script pasted in /usr/share/config/kdm/Xsetup that sets the resolution right for KDM, but it does not run early enough, so login screen looks weird, 70% of the screen is moved to the left and the rest is moved to the right. Kind of hard to explain. I am thinking a proper xorg.conf would solve this issue, but I don't really know how that would work out if the tv is not connected. Here is the script:
#!/bin/bash
if xrandr -q | grep "HDMI1 connected" > /dev/null ; then
xrandr --output HDMI1 --mode 1360x768
xrandr --output LVDS1 --off
else
xrandr --output LVDS1 --mode 1366x768
xrandr --output HDMI1 --off
fi
Rather basic, checks if tv is connected and makes proper adjustments if so. Would a xorg.conf work, or is there a file parsed earlier that I could use? KDM is started with inittab method. Thanks in advance!
Last edited by KlavKalashj (2011-06-07 10:27:27)KlavKalashj wrote:...
Sorry for going off-topic, but I love that nick name. Got that from that
Simpsons episode, right?
For those who don't know:
http://www.imdb.com/title/tt0701230/quotes wrote:Khlav Kalash Vendor: Fresh Khlav kalash! Get your khlav kalash!
Homer Simpson: Hey, uh, could you go across the street and get me a slice of pizza?
Khlav Kalash Vendor: No pizza, only khlav kalash.
Homer Simpson: Aw, shoot... Oh, all right, all right, gimme one bowl.
Khlav Kalash Vendor: [whips out something reddish on a stick] No bowl, stick, stick.
Homer Simpson: [Homer buys one, tries it] Oh, geez! That's just awful.
[finishes it]
Homer Simpson: Now, what do you have to wash that awful taste out of my mouth?
Khlav Kalash Vendor: Mountain Dew or Crab Juice.
Homer Simpson: Blecch! Ew! Sheesh! I'll take a crab juice.
[Homer drinks the can of crab juice, then several more]
Homer Simpson: [burps] Uh-oh. Uh, you got a men's room in there?
Khlav Kalash Vendor: [disturbed] Only khlav kalash. Men's room in tower. Tower! Observation deck! -
[SOLVED]XFCE requires xorg.conf
Hi all,
I was using Zenwalk Linux since 4 years, and made my mind to install Arch Linux. I installed it using the help of Installation Guide. Thanks to the Arch Linux team for providing such a nice descriptive and useful forum through which any newbie can migrate to Arch Linux easily.
I thought of installing XFCE as my Desktop environment as I was using the same previously. I installed LXDM login manager, and the X session I edited to start up with XFCE.
With the login to init 5, I got the error as "Frequency Out of Range" and the screen went blank. Then somehow, I had the xorg.conf and xorg.conf-vesa file of my older Zenwalk System. I copied it to /etc/X11 directory and rebooted to solve the problem.
I dont know whether xorg.conf is needed or not. 'lspci' noted my video driver as
01:00.0 VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266]
I have installed savage-dri and xf86-video-savage from Arch Repo.
I thought of sharing the same so that it might be helpful to someone (or else, if someone can give a better solution, it will be helpful for me too).
Thanks in advance.
With regards,
Ajay Kumar G
Last edited by ajaykumar (2012-09-18 02:02:18)I'm not surprised that an old card would require an xorg.conf file to work correctly. Do you mean that another desktop environment from the Arch repos can work on your system without an xorg.conf? And only XFCE results in an error? Then that would be weird.
-
[SOLVED] xorg.conf with 'hwd -xa' on sony viao not working
Hello,
I have a Sony viao VGN-T150P running Arch linux and I can't get my x.org working .
here are some of information I get:
lspci says
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
02:04.0 CardBus bridge: Texas Instruments PCI7420 CardBus Controller
02:04.2 FireWire (IEEE 1394): Texas Instruments PCI7x20 1394a-2000 OHCI Two-Port PHY/Link-Layer Controller
02:04.3 Mass storage controller: Texas Instruments PCI7420/7620 Combo CardBus, 1394a-2000 OHCI and SD/MS-Pro Controller
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (MOB) Ethernet Controller (rev 83)
02:0b.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
so then I installed xf86-video-intel,
using that driver with a blank xorg.conf , I get 3 terminal windows and xclock, but my mouse and keyboard don't seem to do anything
here are those errors:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 4 23:44:09 2009
(EE) Unable to locate/open config file
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0
(==) Matched intel for the autoconfigured driver
New driver is "intel"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default fbdev Screen 0"
Screen "Builtin Default vesa Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/TTF" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 855GME
(--) intel(0): Chipset: "852GM/855GM"
(--) intel(0): Linear framebuffer at 0xE8000000
(--) intel(0): IO registers at addr 0xE0000000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 8000 kB
(II) intel(0): VESA VBE OEM: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): I2C bus "DVODDC_D" initialized.
(II) Loading sub module "sil164"
(II) LoadModule: "sil164"
(II) Loading /usr/lib/xorg/modules/drivers//sil164.so
(II) Module sil164: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7xxx"
(II) LoadModule: "ch7xxx"
(II) Loading /usr/lib/xorg/modules/drivers//ch7xxx.so
(II) Module ch7xxx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ivch"
(II) LoadModule: "ivch"
(II) Loading /usr/lib/xorg/modules/drivers//ivch.so
(II) Module ivch: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_B" initialized.
(II) Loading sub module "tfp410"
(II) LoadModule: "tfp410"
(II) Loading /usr/lib/xorg/modules/drivers//tfp410.so
(II) Module tfp410: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_B" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) Loading sub module "ch7017"
(II) LoadModule: "ch7017"
(II) Loading /usr/lib/xorg/modules/drivers//ch7017.so
(II) Module ch7017: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVOI2C_E" initialized.
(II) intel(0): I2C bus "DVOI2C_E" removed.
(II) intel(0): I2C bus "DVODDC_D" removed.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" removed.
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 128 kB GTT.
(II) intel(0): detected 8060 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238592 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 954364 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 131072 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(Cannot allocate memory)
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(Cannot allocate memory)
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xe0000000
(II) intel(0): [drm] ring buffer = 0xe8000000
(II) intel(0): [drm] mapped front buffer at 0xe9000000, handle = 0xe9000000
(II) intel(0): [drm] mapped back buffer at 0xec000000, handle = 0xec000000
(II) intel(0): [drm] mapped depth buffer at 0xed000000, handle = 0xed000000
(II) intel(0): [drm] mapped classic textures at 0xee000000, handle = 0xee000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x007df000 (pgoffset 2015)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x007e0000 (pgoffset 2016)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x007e4000 (pgoffset 2020)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x007e5000 (pgoffset 2021)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x007e9000 (pgoffset 2025)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 8 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 9 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00027fff: logical 3D context (32 kB)
(II) intel(0): 0x007df000: end of stolen memory
(II) intel(0): 0x007df000-0x007dffff: Core cursor (4 kB, 0x0000000036307000 physical
(II) intel(0): 0x007e0000-0x007e3fff: ARGB cursor (16 kB, 0x00000000362c8000 physical
(II) intel(0): 0x007e4000-0x007e4fff: Core cursor (4 kB, 0x000000003632f000 physical
(II) intel(0): 0x007e5000-0x007e8fff: ARGB cursor (16 kB, 0x00000000362a8000 physical
(II) intel(0): 0x007e9000-0x007e9fff: overlay registers (4 kB, 0x0000000036322000 physical
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x08000000: end of aperture
(II) intel(0): using SSC reference clock of 66 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
(WW) intel(0): Hardware claims plane A is on while software believes it is off
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): [drm] dma control initialized, using IRQ 9
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 203
if I use hwd -xa to make an xorg.conf which says this:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "i810"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
and do startx it spits out a bunch of errors:
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux myhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 5 15:57:56 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xe8000000/0, 0xe0000000/0, I/O @ 0x00001800/0
(--) PCI: (0@0:2:1) Intel Corporation 82852/855GM Integrated Graphics Device rev 2, Mem @ 0xf0000000/0, 0xe0080000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(WW) Warning, couldn't open module record
(II) UnloadModule: "record"
(EE) Failed to load module "record" (module does not exist, 0)
(II) LoadModule: "i810"
(II) Loading /usr/lib/xorg/modules/drivers//i810_drv.so
(II) Module i810: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(EE) No devices detected.
Fatal server error:
no screens found
Does anybody else a a VGN-T150P or any of these problems? I'm not very good a writing/decoding xorg.conf files so if anybody could help it would be greatly appreciated
Last edited by jsh33 (2009-02-08 14:52:01)I download xf86-video-fbdev just for fun before I saw your post, I didn't do anything as far as I could see.
I commented these lines out:
FontPath "/usr/share/fonts/Type1"
Load "record"
Load "type1"
B, I didn't install any fonts but now I installed a buch of random fonts:
pacman -S ttf-ms-fonts ttf-cheapskate artwiz-fonts xorg-fonts-75dpi xorg-fonts-100dpi
and did some of what the X.org configuration wiki said:
fc-cache -fv
/usr/bin/fc-cache
/usr/bin/mkfontscale
/usr/bin/mkfontdir
ln -s /usr/share/fonts/encodings/encodings.dir encodings.dir
Then this I changed this:
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
EndSection
EDIT, halfway through this post I realized I type in biagio's code wrong, I re-typed it and now my X works!
Thanks Everybody for the help! , here's the working xorg.conf for reference:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
# Serial Mouse not detected
# USB Mouse not detected
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
# FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
# Load "type1"
Load "freetype"
# Load "record"
# Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbVariant" ""
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
# Auto-generated by Archie mkxcfg
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
# Auto-generated by Archie mkxcfg
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1280x768" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection -
[SOLVED] Prev working xorg.conf won't work with new nvidia
So I just upgraded to the latest nvidia driver. Previously, my xfx 6600 and dell 2001fp could display 1600x1200 just fine, but now it's ratcheting X down to 1400x1050 (even though 1600x1200 is the only option I've specified in the xorg.conf).
Any ideas?
Here's a relevant piece of the X log:
(II) NVIDIA(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "800x600" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1152x768" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "576x384" (vrefresh out of range)
(II) NVIDIA(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
(II) NVIDIA(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (hsync out of range)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) NVIDIA(0): Not using mode "1600x1200" (no mode of this name)
(**) NVIDIA(0): Validated modes for display device DFP-0:
(**) NVIDIA(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
Here's my xorg.conf (sorry for the length):
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5x) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
Section "Module"
# This loads the DBE extension module.
Load "dbe" # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
# This loads the font modules
Load "type1"
# Load "speedo"
Load "freetype"
# Load "xtt"
# This loads the GLX module
Load "glx"
# This loads the DRI module
# Load "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath "/usr/X11R6/lib/X11/fonts/CID/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/local/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
# FontPath "/usr/X11R6/lib/X11/fonts/TrueType/"
# FontPath "/usr/X11R6/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
# ModulePath "/usr/X11R6/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
# Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
# Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
# Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
# Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
# Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
# Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
# Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
# Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Option "XkbRules" "xorg"
Option "XkbModel" "microsoft"
Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
# Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
Identifier "dell lcd"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
HorizSync 31-79
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
VertRefresh 50-100
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
Identifier "xfx"
Driver "nvidia"
#VideoRam 262144
# Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen 1"
Device "xfx"
Monitor "dell lcd"
DefaultDepth 24
Subsection "Display"
Depth 8
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 16
Modes
ViewPort 0 0
EndSubsection
Subsection "Display"
Depth 24
Modes "1600x1200"
ViewPort 0 0
EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
# Mode 0666
# EndSection
thankshttp://www.nvnews.net/vbulletin/showthread.php?t=51431
Here's the one I'm using:
Modeline "1600x1200" 140.00 1600 1632 2024 2052 1200 1200 1208 1216 -
Creation of Functional, Minimal, and Correct Xorg.conf [SOLVED]
Being fairly new to GNU/Linux in general, and totally green in doing things myself, I foolishly avoided the building of an xorg.conf. Following the beginner's guide in the wiki, I just did an "xorg --configure" which created a base xorg.conf for me. It worked, and I noticed no problems in the general use of my window manager (xmonad). I have an ATI Mobility Radeon X1300.
I discovered today that I was using the radeonhd driver which was giving me terrible performance in OpenGL applications, so edited xorg.conf to revert back to the plain radeon driver. Upon restarting X, my performance problems were gone, but my fonts in the Firefox interface devolved... I have taken this a wakeup call to actually write a good xorg.conf and to understand what everything in it is for.
I have done plenty of configuration, though I have never before looked into editing the dreaded xorg.conf, coming from Ubuntu, so I know very little. Any help would be greatly appreciated.
Specifics:
What parts are necessary?
How do I get the fonts I had before back?
Graphics is all that concerns me, I have no strange input devices, and my touchpad works fine (I configured the fdi files for that).
I will list my current xorg.conf below. Fonts worked before I changed the driver from radeonhd to radeon and enabled the option for EXA. Before these changes, all the text contained therein was created automagically by xorg. I have a feeling most of this is unnecessary.
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "M52 [Mobility Radeon X1300]"
BusID "PCI:1:0:0"
Option "AccelMethod" "EXA"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by egan (2009-09-27 17:28:50)skottish wrote:
X searches all of the directories that you had in your original xorg.conf file, and it will load whatever it needs automatically. I don't think your problem is specifically with xorg.conf (or lack of), I think what you're seeing is the DPI changing between drivers.
Try this with each driver loaded and see if they're different:
xdpyinfo | grep resolution
Ah, yes indeed!
radeonhd: 96x96
radeon: 129x127
How do I get X with the radeon driver to use 96x96?
EDIT: Adding a dpi argument of 96 to /etc/X11/xinit/xserverrc fixed the problem. I didn't occur to me that the two drivers would use different dpis.
Thank you so much!
Last edited by egan (2009-09-27 17:13:28) -
[SOLVED]xpra + winswitch - best practice due to /etc/X11/xorg.conf.d/*
Running xpra causes some headaches.
The application builds fine and installs just perfectly, the troubles comes from the default Xorg configuration is no longer stored in /etc/X11/xorg.conf, it's now stored and read from numerous files under /etc/X11/xorg.conf.d/ where just so happen to be my 5-nvidia.conf.
Starting xpra via:
xpra start :100
Causes:
X.Org X Server 1.14.3
Release Date: 2013-09-12
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.11.0-1-ARCH x86_64
Current Operating System: Linux archie 3.11.2-1-ARCH #1 SMP PREEMPT Fri Sep 27 07:35:36 CEST 2013 x86_64
Kernel command line: root=/dev/sda1 rw initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
Build Date: 13 September 2013 01:28:59PM
Current version of pixman: 0.30.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/home/torxed/.xpra/Xorg.:100.log", Time: Thu Oct 3 19:56:30 2013
(++) Using config file: "/etc/xpra/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
setversion 1.4 failed
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(EE)
Fatal server error:
(EE) xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/home/torxed/.xpra/Xorg.:100.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
2013-10-03 19:56:30,893
2013-10-03 19:56:30,893 Xvfb command has terminated! xpra cannot continue
2013-10-03 19:56:30,894
2013-10-03 19:56:30,895 removing socket /home/torxed/.xpra/archie-100
tl;dr: 5-nvidia.conf is trying to get loaded after xf86-video-dummy is loaded (which is the default for xpra).
Now to the question: What's the best practice because there's no information about this issue, and i can't be the only one who's run in to this since the xorg.conf was removed. At the moment I move all my nvidia configs out of the way, start xpra and move them back in. This works for the better part as long as i execute xpra with my own scripts.
But is there a better way (which doesn't perhaps include recreating xorg.conf since that appears to be something you should walk away from)?
Last edited by Torxed (2013-10-04 10:29:35)Good thinking! (xpra is basically just screen but for x, or a X11 tunnel via SSH).
After a really quick poking around and remembering that xpra really just uses xorg-server-xvfb and at the very bottom of /etc/xpra/xpra.conf there's a line that says:
xvfb=xpra_Xdummy -dpi 96 -noreset -nolisten tcp +extension GLX +extension RANDR +extension RENDER -logfile ${HOME}/.xpra/Xorg.${DISPLAY}.log -config /etc/xpra/xorg.conf
Appending -configdir appears to be working.
Here are the full steps:
[torxed@archie ~]$ sudo cp -r /etc/X11/xorg.conf.d /etc/xpra/
[torxed@archie ~]$ sudo rm /etc/xpra/xorg.conf.d/*nvidia*
[torxed@archie ~]$ sudo sed -i '$s/$/ -configdir \/etc\/xpra\/xpra.conf.d/' /etc/xpra/xpra.conf
*nvidia* would have to match your graphic-driver-config that would cause xorg-server-xvbf to crash.
I'll update the wiki and put a mention on the package about it because this either has to be standard or well known from the start because it really just breaks the package all together.
Last edited by Torxed (2013-10-04 10:29:09) -
[Solved] Changed Graphics Driver/Xorg.conf, Font Size Now Different
Hello,
I just got the Catalyst 9.4 drivers working on my laptop (Lenovo T400) since the open source ones just can't keep up (even with DRI).
The problem is now my fonts are all different sizes (or not loading).
I was thinking this might be because of my monitor settings in xorg.conf. I've spent a really long time trying to get the catalyst drivers working (I'm doing OpenGL work, so I kinda need them), so I definitely understand why the Arch team took them out of the main repository. I'm just a little hesitant about changing settings after I finally found a working config.
Old:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
InputDevice "Touchpad" "CorePointer"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
Option "AutoAddDevices" "False"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
# Additional fonts: Locale, Gimp, TTF...
FontPath "/usr/share/fonts/cyrillic"
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "synaptics"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors
HorizSync 28.0 - 96.0 # Warning: This may fry old Monitors
VertRefresh 50.0 - 75.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
# 640x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
# 720x400 @ 85Hz (VESA) hsync: 37.9kHz
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
# 640x480 @ 60Hz (Industry standard) hsync: 31.5kHz
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
# 640x480 @ 72Hz (VESA) hsync: 37.9kHz
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
# 640x480 @ 75Hz (VESA) hsync: 37.5kHz
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
# 640x480 @ 85Hz (VESA) hsync: 43.3kHz
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
# 800x600 @ 56Hz (VESA) hsync: 35.2kHz
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
# 800x600 @ 60Hz (VESA) hsync: 37.9kHz
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
# 800x600 @ 72Hz (VESA) hsync: 48.1kHz
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
# 800x600 @ 75Hz (VESA) hsync: 46.9kHz
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
# 800x600 @ 85Hz (VESA) hsync: 53.7kHz
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
# 1024x768i @ 43Hz (industry standard) hsync: 35.5kHz
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync Interlace
# 1024x768 @ 60Hz (VESA) hsync: 48.4kHz
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
# 1024x768 @ 70Hz (VESA) hsync: 56.5kHz
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
# 1024x768 @ 75Hz (VESA) hsync: 60.0kHz
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768 @ 85Hz (VESA) hsync: 68.7kHz
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1152x864 @ 75Hz (VESA) hsync: 67.5kHz
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
# 1280x960 @ 60Hz (VESA) hsync: 60.0kHz
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
# 1280x960 @ 85Hz (VESA) hsync: 85.9kHz
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
# 1280x1024 @ 60Hz (VESA) hsync: 64.0kHz
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 75Hz (VESA) hsync: 80.0kHz
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1280x1024 @ 85Hz (VESA) hsync: 91.1kHz
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1600x1200 @ 60Hz (VESA) hsync: 75.0kHz
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 65Hz (VESA) hsync: 81.3kHz
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 70Hz (VESA) hsync: 87.5kHz
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 75Hz (VESA) hsync: 93.8kHz
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200 @ 85Hz (VESA) hsync: 106.3kHz
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1792x1344 @ 60Hz (VESA) hsync: 83.6kHz
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
# 1792x1344 @ 75Hz (VESA) hsync: 106.3kHz
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
# 1856x1392 @ 60Hz (VESA) hsync: 86.3kHz
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
# 1856x1392 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
# 1920x1440 @ 60Hz (VESA) hsync: 90.0kHz
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
# 1920x1440 @ 75Hz (VESA) hsync: 112.5kHz
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
# Additional modelines
ModeLine "1800x1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
ModeLine "1800x1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync
# Extended modelines with GTF timings
# 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
ModeLine "640x480" 43.16 640 680 744 848 480 481 484 509 -HSync +Vsync
# 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
ModeLine "768x576" 34.96 768 792 872 976 576 577 580 597 -HSync +Vsync
# 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
ModeLine "768x576" 42.93 768 800 880 992 576 577 580 601 -HSync +Vsync
# 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
ModeLine "768x576" 45.51 768 808 888 1008 576 577 580 602 -HSync +Vsync
# 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
ModeLine "768x576" 51.84 768 808 888 1008 576 577 580 605 -HSync +Vsync
# 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
ModeLine "768x576" 62.57 768 816 896 1024 576 577 580 611 -HSync +Vsync
# 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
ModeLine "800x600" 68.18 800 848 936 1072 600 601 604 636 -HSync +Vsync
# 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
ModeLine "1024x768" 113.31 1024 1096 1208 1392 768 769 772 814 -HSync +Vsync
# 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
ModeLine "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 -HSync +Vsync
# 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
ModeLine "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 -HSync +Vsync
# 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
ModeLine "1152x864" 143.47 1152 1232 1360 1568 864 865 868 915 -HSync +Vsync
# 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
ModeLine "1280x960" 124.54 1280 1368 1504 1728 960 961 964 1001 -HSync +Vsync
# 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
ModeLine "1280x960" 129.86 1280 1368 1504 1728 960 961 964 1002 -HSync +Vsync
# 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
ModeLine "1280x960" 178.99 1280 1376 1520 1760 960 961 964 1017 -HSync +Vsync
# 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
ModeLine "1280x1024" 190.96 1280 1376 1520 1760 1024 1025 1028 1085 -HSync +Vsync
# 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
ModeLine "1400x1050" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -HSync +Vsync
# 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
ModeLine "1400x1050" 149.34 1400 1496 1648 1896 1050 1051 1054 1094 -HSync +Vsync
# 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
ModeLine "1400x1050" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -HSync +Vsync
# 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
ModeLine "1400x1050" 179.26 1400 1504 1656 1912 1050 1051 1054 1103 -HSync +Vsync
# 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
ModeLine "1400x1050" 214.39 1400 1512 1664 1928 1050 1051 1054 1112 -HSync +Vsync
# 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
ModeLine "1600x1200" 280.64 1600 1728 1904 2208 1200 1201 1204 1271 -HSync +Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # [<str>]
#Option "offscreensize" # [<str>]
#Option "SWcursor" # [<bool>]
#Option "ignoreconnector" # [<str>]
#Option "forcereduced" # [<bool>]
#Option "forcedpi" # <i>
#Option "useconfiguredmonitor" # [<bool>]
#Option "HPD" # <str>
#Option "NoRandr" # [<bool>]
#Option "RROutputOrder" # [<str>]
#Option "DRI" # [<bool>]
#Option "TVMode" # [<str>]
#Option "ScaleType" # [<str>]
#Option "UseAtomBIOS" # [<bool>]
#Option "AtomBIOS" # [<str>]
#Option "UnverifiedFeatures" # [<bool>]
#Option "Audio" # [<bool>]
#Option "HDMI" # [<str>]
#Option "COHERENT" # [<str>]
Identifier "Card0"
Driver "radeonhd"
VendorName "ATI Technologies Inc"
BoardName "Mobility Radeon HD 3400 Series"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1440x900
EndSubSection
SubSection "Display"
Depth 4
Modes "1440x900
EndSubSection
SubSection "Display"
Depth 8
Modes "1440x900
EndSubSection
SubSection "Display"
Depth 15
Modes "1440x900
EndSubSection
SubSection "Display"
Depth 16
Modes "1440x900
EndSubSection
SubSection "Display"
Depth 24
Modes "1440x900
EndSubSection
SubSection "Display"
Depth 32
Modes "1440x900"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
New:
Section "ServerLayout"
# PS/2 Mouse not detected
# Serial Mouse not detected
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Touchpad" "CorePointer"
EndSection
Section "Files"
# Additional fonts: Locale, Gimp, TTF...
# FontPath "/usr/share/lib/X11/fonts/latin2/75dpi"
# FontPath "/usr/share/lib/X11/fonts/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
Load "synaptics"
EndSection
#Cut out input devices section...
Section "Monitor"
# Warning: This may fry old Monitors
# Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# Default modes distilled from
# "VESA and Industry Standards and Guide for Computer Display Monitor
# Timing", version 1.0, revision 0.8, adopted September 17, 1998.
# $XFree86: xc/programs/Xserver/hw/xfree86/etc/vesamodes,v 1.4 1999/11/18 16:52:17 tsi Exp $
# 640x350 @ 85Hz (VESA) hsync: 37.9kHz
Identifier "Panel"
HorizSync 28.0 - 96.0
VertRefresh 50.0 - 75.0
ModeLine "640x350" 31.5 640 672 736 832 350 382 385 445 +hsync -vsync
ModeLine "640x400" 31.5 640 672 736 832 400 401 404 445 -hsync +vsync
ModeLine "720x400" 35.5 720 756 828 936 400 401 404 446 -hsync +vsync
ModeLine "640x480" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
ModeLine "640x480" 31.5 640 664 704 832 480 489 491 520 -hsync -vsync
ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -hsync -vsync
ModeLine "640x480" 36.0 640 696 752 832 480 481 484 509 -hsync -vsync
ModeLine "800x600" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
ModeLine "800x600" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
ModeLine "800x600" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
ModeLine "800x600" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
ModeLine "800x600" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
ModeLine "1024x768" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync +vsync interlace
ModeLine "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 75.0 1024 1048 1184 1328 768 771 777 806 -hsync -vsync
ModeLine "1024x768" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
ModeLine "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
ModeLine "1152x864" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
ModeLine "1280x960" 108.0 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync
ModeLine "1280x960" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
ModeLine "1280x1024" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
ModeLine "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
ModeLine "1600x1200" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1600x1200" 229.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
ModeLine "1792x1344" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
ModeLine "1792x1344" 261.0 1792 1888 2104 2456 1344 1345 1348 1417 -hsync +vsync
ModeLine "1856x1392" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
ModeLine "1856x1392" 288.0 1856 1984 2208 2560 1392 1393 1396 1500 -hsync +vsync
ModeLine "1920x1440" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
ModeLine "1920x1440" 297.0 1920 2064 2288 2640 1440 1441 1444 1500 -hsync +vsync
ModeLine "1800x1440" 230.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "1800x1440" 250.0 1800 1896 2088 2392 1440 1441 1444 1490 +hsync +vsync
ModeLine "640x480" 43.2 640 680 744 848 480 481 484 509 -hsync +vsync
ModeLine "768x576" 35.0 768 792 872 976 576 577 580 597 -hsync +vsync
ModeLine "768x576" 42.9 768 800 880 992 576 577 580 601 -hsync +vsync
ModeLine "768x576" 45.5 768 808 888 1008 576 577 580 602 -hsync +vsync
ModeLine "768x576" 51.8 768 808 888 1008 576 577 580 605 -hsync +vsync
ModeLine "768x576" 62.6 768 816 896 1024 576 577 580 611 -hsync +vsync
ModeLine "800x600" 68.2 800 848 936 1072 600 601 604 636 -hsync +vsync
ModeLine "1024x768" 113.3 1024 1096 1208 1392 768 769 772 814 -hsync +vsync
ModeLine "1152x864" 81.6 1152 1216 1336 1520 864 865 868 895 -hsync +vsync
ModeLine "1152x864" 119.7 1152 1224 1352 1552 864 865 868 907 -hsync +vsync
ModeLine "1152x864" 143.5 1152 1232 1360 1568 864 865 868 915 -hsync +vsync
ModeLine "1280x960" 124.5 1280 1368 1504 1728 960 961 964 1001 -hsync +vsync
ModeLine "1280x960" 129.9 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
ModeLine "1280x960" 179.0 1280 1376 1520 1760 960 961 964 1017 -hsync +vsync
ModeLine "1280x1024" 191.0 1280 1376 1520 1760 1024 1025 1028 1085 -hsync +vsync
ModeLine "1400x1050" 122.6 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
ModeLine "1400x1050" 149.3 1400 1496 1648 1896 1050 1051 1054 1094 -hsync +vsync
ModeLine "1400x1050" 155.8 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
ModeLine "1400x1050" 179.3 1400 1504 1656 1912 1050 1051 1054 1103 -hsync +vsync
ModeLine "1400x1050" 214.4 1400 1512 1664 1928 1050 1051 1054 1112 -hsync +vsync
ModeLine "1600x1200" 280.6 1600 1728 1904 2208 1200 1201 1204 1271 -hsync +vsync
Option "DPMS" "true" #"# HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "Panel"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
I just switched to Arch from Debian a few weeks ago, and I had fglrx working with my Debian install, but I'm not really great at configuring Xorg, so I just don't want to break X again.
/var/log/Xorg.log.0
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH x86_64
Current Operating System: Linux orion 2.6.29-ARCH #1 SMP PREEMPT Wed May 20 06:42:43 UTC 2009 x86_64
Build Date: 28 May 2009 08:24:17PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 1 16:24:31 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]-0" (0)
(**) | |-->Monitor "Panel"
(**) | |-->Device "aticonfig-Device[0]-0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Touchpad"
(**) Option "AllowMouseOpenFail" "true"
(**) Option "AutoAddDevices" "False"
(**) Not automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) No default mouse found, adding one
(**) |-->Input Device "<default pointer>"
(II) Loader magic: 0x3540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded by default.
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(WW) Warning, couldn't open module freetype
(II) UnloadModule: "freetype"
(EE) Failed to load module "freetype" (module does not exist, 0)
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.60.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "synaptics"
(II) Reloading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.60.3
(II) ATI Proprietary Linux Driver Release Identifier: 8.602
(II) ATI Proprietary Linux Driver Build Date: Apr 1 2009 15:01:03
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 5.0
(--) Chipset Supported AMD Graphics Processor (0x95C4) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x1f42030
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
(--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfff0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M82
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): Using adapter: 1:0.0.
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LEN Model: 4036 Serial#: 0
(II) fglrx(0): Year: 2008 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542
(II) fglrx(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 101.6 MHz Image Size: 304 x 190 mm
(II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 85.6 MHz Image Size: 304 x 190 mm
(II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
(WW) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0): LP141WP2-TLB1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0030ae364000000000
(II) fglrx(0): 00120103801e1378ea4b859257568a28
(II) fglrx(0): 20505400000001010101010101010101
(II) fglrx(0): 010101010101b027a08051841a303020
(II) fglrx(0): 360030be100000197021a09851841a30
(II) fglrx(0): 3020360030be100000190000000f0095
(II) fglrx(0): 0a32950a28191900320c3c01000000fe
(II) fglrx(0): 004c503134315750322d544c4231001f
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output LCD using monitor section Panel
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): Output LCD connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output LCD using initial mode 1440x900
(**) fglrx(0): Display dimensions: (300, 190) mm
(**) fglrx(0): DPI set to (121, 192)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.1.901, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(II) fglrx(0): [pcie] 1986560 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Direct rendering enabled
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Interrupt handler installed at IRQ 32.
(II) fglrx(0): Finished Initialize PPLIB!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0x7ff050dab000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.60.3
(II) fglrx(0): Date: Apr 1 2009
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.29-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): Display width adjusted to to 1536 due to alignment constraints
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x010bc000
(II) fglrx(0): FBMM initialized for area (0,0)-(1536,2856)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1536,1536) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1536 x 1320
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 304 x 190
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) Synaptics touchpad driver version 1.1.2
(--) Touchpad auto-dev sets device to /dev/input/event11
(**) Option "Device" "/dev/input/event11"
(II) Touchpad: x-axis range 1472 - 5472
(II) Touchpad: y-axis range 1408 - 4448
(II) Touchpad: pressure range 0 - 255
(II) Touchpad: finger width range 0 - 0
(II) Touchpad: buttons: left right middle
(**) Option "SHMConfig" "on"
(**) Option "LeftEdge" "1632"
(**) Option "RightEdge" "5312"
(**) Option "TopEdge" "1575"
(**) Option "BottomEdge" "4281"
(**) Option "FingerLow" "25"
(**) Option "FingerHigh" "30"
(**) Option "MaxTapTime" "180"
(**) Option "MaxTapMove" "220"
(**) Option "EmulateTwoFingerMinZ" "0"
(**) Option "VertScrollDelta" "100"
(**) Option "VertEdgeScroll" "on"
(**) Option "HorizEdgeScroll" "on"
(**) Option "VertTwoFingerScroll" "on"
(**) Option "HorizTwoFingerScroll" "on"
(**) Option "MinSpeed" "0.20"
(**) Option "MaxSpeed" "1.00"
(**) Option "AccelFactor" "0.0020"
(--) Touchpad: touchpad found
(**) Option "AlwaysCore"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) Touchpad: always reports core events
(II) XINPUT: Adding extended input device "Touchpad" (type: TOUCHPAD)
(**) Touchpad: (accel) keeping acceleration scheme 1
(**) Touchpad: (accel) filter chain progression: 2.00
(**) Touchpad: (accel) filter stage 0: 20.00 ms
(**) Touchpad: (accel) set acceleration profile 0
(--) Touchpad: touchpad found
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "AlwaysCore"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) filter chain progression: 2.00
(**) <default pointer>: (accel) filter stage 0: 20.00 ms
(**) <default pointer>: (accel) set acceleration profile 0
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(II) fglrx(0): Restoring recent mode: 1440x900@50Hz
swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
swlDalGetDisplayIndex:ERROR: The number of Active Displays is 0
(II) config/hal: Adding input device ThinkPad Extra Buttons
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Macintosh mouse button emulation
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) config/hal: Adding input device Video Bus
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) config/hal: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
(EE) config/hal: NewInputDeviceRequest failed (8)
(II) 3rd Button detected: disabling emulate3Button
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
(II) fglrx(0): atiddxDisplayScreenLoadPalette: numColors: 256
Thanks a bunch for any suggestions, xorg.conf can be a bit confusing for me.
Last edited by atrium (2009-06-02 10:20:56)iphitus wrote:
Could be dpi.
What are you using to login?
if it's startx, you can do startx -- -dpi 96
if it's a login manager, you'll need to edit it's configuration and set it otherwise.
Thanks for the quick reply. I'm starting slim as a daemon at bootup inside /etc/rc.conf, then using XFCE4. -
[SOLVED] Virtual screen resolution in xorg.conf being ignored
I'm trying to configure a dual monitor set up but xrandr is telling me the max screen size is 1600x1600. I have already enterd a virtual resolution in xorg.conf.
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
EndSection
Section "Files"
EndSection
Section "Module"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Virtual 2832 1050
EndSubSection
EndSection
When I first installed Arch I was using the radeon drivers. I had no problem configuring my monitors the way I wanted. Now I'm using catalyst and getting errors.
Am I just doing something wrong?
Last edited by thetoxikavenger (2010-06-06 15:58:18)I didn't really fix the issue with xrandr, but I did manage to get my dual monitors to work with Xinerama.
Maybe you are looking for
-
How to copy a value from one Frame to another Frame.
Hi, I am new to Swing and AWT prgramming . I have created a menu called " Test window " and it contains toplevel menu item "File" and File Menu contains subitems "Product Evaluation", "ProcessEvaluation", "ResourceEvalation", "TotalEvaluation" and "E
-
Comment and a question about Adobe CS5 suite.
Does anyone believe Adobe products are a bit too raw. When I was younger I used Adobe products and I know a good amount about PCs and their functions. I pictured Adobe Suite to be more inviting. I know it is possible to create dynamic presentations f
-
Back up from computer and icloud failed...
My ipad 2's home button was not responding properly. I was adviced to restore the device by the retailed seller. I backed up the device to both icloud and computer. I've been using icloud for a long time. Later, I hard reseted the device reloaded it
-
Hi, In my present process.For service (ME21N)PO'S withholdingtax is calculated and for non service PO's there is no withholdingtax calculated. In standard sap PO's.Tax will be calculated for both service POS and non service PO's. Can any guide me wh
-
Error in Build Application (EXE)
Hi, There is an error is prompt as attached when I was trying to build the exe. Both my Labview 2012 & Database toolkit are evaluation version. I have no idea how to choose the different option as the error message mentioned. Is there any alternative