[SOLVED] Configuring XFCE on Arch Linux to Use Uswsusp

Hello, first time Archer and I am quickly loving it more than the other distros I have been using over the years.
I have an oldish MacBook Pro (6,2 model, 3-4 years old) I have running Arch with base, base-devel, a variety of selected apps, and now XFCE. I got uswsusp working, and I just usually open the Linux terminal or a terminal emulator and run `sudo s2disk`. How do I configure XFCE buttons from the Logout menu to allow s2disk and s2ram? I have seen a little documentation of the xfconf-query tool and using it, for example, to completely disable such icons for kiosk mode from the official XFCE forum, but I cannot figure out how to choose the suspend and hibernate commands.
Anyone know how?
Last edited by ajstein (2014-03-11 11:27:27)

I assume no one is going to help with this, but rereading the instructions from the wiki regarding using uswsusp with the pm-utils section and using the FreeDesktop component one would use via dbus-send does not work, because it is dated.
[me@laptop ~]$ dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend
Error org.freedesktop.UPower.GeneralError: Method is deprecated, please port to org.freedesktop.login1.Manager.Suspend
I am looking into how to fix this up. Sorry if I am being bothersome.

Similar Messages

[SOLVED] 3d Acceleration on Arch Linux guest

I've just installed the latest FTP Arch Linux (2009.02) as a Guest running in Virtual Box 3.0.2 in my Windows 7 host, and I cannot get Xorg working at all.
- 3D Acceleration is enabled for the VM, and 128MB of video memory allocated
- Guest Additions were installed successfully, added rc.vboxadd to daemons, and everything loads ok on startup.
Output of 'dmesg | grep vbox':
vboxadd: Successfully loaded version 3.0.2 (interface 0x0010004)
vboxvfs: Successfully loaded version 3.0.2 (interface 0x0010004)
[drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
Here is my .xinitrc:
/usr/bin/VBoxClient-all
I've symlinked vboxvideo_dri.so since the installer didn't do it.
Output of 'ls -l /usr/lib/xorg/modules/dri/vboxvideo_dri.so':
lrwxrwxrwx 1 root root 19 2009-07-31 22:42 /usr/lib/xorg/modules/dri/vboxvideo_dri.so -> /usr/lib/VBoxOGL.so
And error when I run 'startx':
(EE) AIGLX error: dlopen of /usr/lib/xorg/modules/dri/vboxvideo_dri.so failed (libXcomposite.so.1: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
waiting for X server to shut down
And then it shuts down, without even trying to load swrast_dri.so. But the weirdest part is, that symlink exists, but X is saying it doesn't! I've restarted the VM and still get the same error.
Here is my xorg.conf (created by installing GA), and I do have HAL up and running, loaded before the rc.vboxadd daemon:
# Default xorg.conf for Xorg 1.5+ without PCI_TXT_IDS_PATH enabled.
# This file was created by VirtualBox Additions installer as it
# was unable to find any existing configuration file for X.
Section "Device"
Identifier "VirtualBox Video Card"
Driver "vboxvideo"
EndSection
So... what next?
Last edited by timmahcheese (2009-08-03 15:20:55)

Silly me, I forgot the libxcomposite package. I guess I should read the errors closer.
Anyway, I'm still getting an error (signal 11) being caused by VBoxClient-all. Here is my Xorg.0.log:
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux obi-wan 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
Build Date: 18 July 2009 08:27:13PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 2 23:20:02 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "VirtualBox Video Card"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:0:2:0) 80ee:beef:0000:0000 InnoTek Systemberatung GmbH VirtualBox Graphics Adapter rev 0, Mem @ 0xe0000000/134217728
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "vboxvideo"
(II) Loading /usr/lib/xorg/modules/drivers//vboxvideo_drv.so
(II) Module vboxvideo: vendor="Sun Microsystems, Inc."
compiled for 1.5.99.901, module version = 1.0.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) VBoxVideo: guest driver for VirtualBox: vbox
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) VBoxVideo(0): VirtualBox guest additions video driver version 3.0.2
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) VBoxVideo(0): initializing int10
(II) VBoxVideo(0): Primary V_BIOS segment is: 0xc000
(II) VBoxVideo(0): VESA BIOS detected
(II) VBoxVideo(0): VESA VBE Version 2.0
(II) VBoxVideo(0): VESA VBE Total Mem: 131072 kB
(II) VBoxVideo(0): VESA VBE OEM: VirtualBox VBE BIOS http://www.virtualbox.org/
(II) VBoxVideo(0): VESA VBE OEM Software Rev: 0.2
(II) VBoxVideo(0): VESA VBE OEM Vendor: Sun Microsystems, Inc.
(II) VBoxVideo(0): VESA VBE OEM Product: VirtualBox VBE Adapter
(II) VBoxVideo(0): VESA VBE OEM Product Rev: Sun VirtualBox Version 3.0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) VBoxVideo(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) VBoxVideo(0): Depth 24, (--) framebuffer bpp 32
(II) VBoxVideo(0): Output VBOX1 has no monitor section
(II) VBoxVideo(0): The maximum supported resolution is currently 32000x32000
(II) VBoxVideo(0): Output VBOX1 has no monitor section
(II) VBoxVideo(0): Output VBOX1 connected
(II) VBoxVideo(0): Using exact sizes for initial modes
(II) VBoxVideo(0): Output VBOX1 using initial mode 1024x768
(==) VBoxVideo(0): RGB weight 888
(==) VBoxVideo(0): Default visual is TrueColor
(==) VBoxVideo(0): Using gamma correction (1.0, 1.0, 1.0)
(==) VBoxVideo(0): DPI set to (96, 96)
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(==) VBoxVideo(0): Default visual is TrueColor
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) VBoxVideo(0): [drm] Using the DRM lock SAREA also for drawables.
(II) VBoxVideo(0): [drm] framebuffer handle = 0xe0000000
(II) VBoxVideo(0): [drm] added 1 reserved context for kernel
(II) VBoxVideo(0): X context handle = 0x1
(II) VBoxVideo(0): [drm] installed DRM signal handler
(II) VBoxVideo(0): visual configurations initialized
(==) VBoxVideo(0): Backing store disabled
(II) VBoxVideo(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) VBoxVideo(0): DPMS enabled
(II) VBoxVideo(0): The VBox video extensions are now enabled.
(II) VBoxVideo(0): [DRI] installation complete
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) Next line is added to allow vboxvideo_drv.so to appear as whitelisted driver
(II) The file referenced, is *NOT* loaded
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(EE) AIGLX error: vboxvideo does not export required DRI extension
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) VBoxVideo(0): Setting screen physical size to 270 x 203
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Generic Explorer Mouse
(**) ImExPS/2 Generic Explorer Mouse: always reports core events
(**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event5"
(II) ImExPS/2 Generic Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Generic Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Generic Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device VirtualBox Guest Service
(II) LoadModule: "vboxmouse"
(II) Loading /usr/lib/xorg/modules/input//vboxmouse_drv.so
(II) Module vboxmouse: vendor="Sun Microsystems Inc."
compiled for 0.0.0, module version = 1.0.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) VirtualBox Guest Service: always reports core events
(**) VirtualBox Guest Service: Device: "/dev/vboxadd"
(II) XINPUT: Adding extended input device "VirtualBox Guest Service" (type: MOUSE)
(**) VirtualBox Guest Service: (accel) keeping acceleration scheme 1
(**) VirtualBox Guest Service: (accel) filter chain progression: 2.00
(**) VirtualBox Guest Service: (accel) filter stage 0: 20.00 ms
(**) VirtualBox Guest Service: (accel) set acceleration profile 0
(**) VirtualBox Guest Service: Mouse Integration associated with screen 0
(II) VirtualBox Guest Service: On.
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813154b]
1: /usr/bin/X(xf86SigHandler+0x9e) [0x80cacee]
2: [0xb8008400]
3: /usr/bin/X(Dispatch+0x80) [0x808c350]
4: /usr/bin/X(main+0x395) [0x8072005]
5: /lib/libc.so.6(__libc_start_main+0xe6) [0xb7be2a36]
6: /usr/bin/X [0x80714b1]
Fatal server error:
Caught signal 11. Server aborting
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImExPS/2 Generic Explorer Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) VirtualBox Guest Service: Off.
(II) VirtualBox Guest Service: Close
(II) UnloadModule: "vboxmouse"
Last edited by timmahcheese (2009-08-03 04:07:48)

[SOLVED]How to install Arch Linux UEFI to dual-boot?

Hey,
so I have a Lenovo G50-70 on which I want to have a Windows-Arch dualboot. I followed the Beginner's Guide, installed Arch but ended up with an inaccessible Windows. I could boot into Windows from the BIOS utility, but not from the gummiboot bootloader.
The guide said if I wanted to dual-boot, I must leave windows EFI partition alone, which I did. I have my Windows partitions set up the Windows way, with the system reserved and EFI and recovery partitions, and I have my Windows partition of course and a data partition. After that I have some unallocated space, on which I made the Arch partitions, /dev/sda6 as an ESP partition for the EFI files, /dev/sda7 as root, /dev/sda8 as swap and /dev/sda9 as /home. The install process went without any error, then I made some configurations and installed dosfstools & efibootmgr. After that, I installed gummiboot and ran "gummiboot --path=/boot install". After that I created the configuration files exactly like in the guide, unmounted the partitions, rebooted and saw that there's no (easy) way getting into Windows. So my question is: how can I install Arch to have a working dual-boot system?
Thanks for any help in advance!
Regards, Matteussz
Last edited by Matteussz (2015-02-11 20:41:37)

Hey,
Writing to you on my working dual-boot with ArchLinux (Windows 8.1 64-Bit, UEFI)
So first step I've done is creating free space of an existing partition in the windows disk management (windows button and r and then type diskmgmt.msc). At this step, you have to record which partition your efi partition is (just take a look at your efi partition and remember the mb of this partition for later)
Then go into the uefi settings (bios) and disable secure boot as well as fast boot, otherwise it could cause data crash.
Boot your Arch Live CD and follow the beginners guide all the way along till you reach the disk management.
If you want to have swap, you can create yours right now, should be a primary partition of about 4gigs.
Next partition is gonna be your home, system partition (I've didn't created two partitions for home and for the system but you could do this as well as just go with one partition) this partition gonna be formatted in ext4
Next step, you have to mount your windows-efi partition in /boot/efi but don't format it dont remeber if it asks you how to use the partition but if so, just use as fat32.
After the disk management go ahead with your arch installation and follow the beginners guide. (Make sure you're using the grub bootloader)
After finishing the installation, restart your system, hopefully you will recognize the opening grub menu. (but dont scare, windows wont show in the grub menu at this time so you have to boot your arch)
Arrived in arch linux type the command
grub-mkconfig -o /boot/grub/grub.cfg
Reboot and your done with your Arch Linux, Windows 8 dual boot, hopefully

[SOLVED]System Hang in Arch Linux

I have tried distributions like ubuntu and fedora in hope for finding a stable system . So I move on to Arch Linux
But this problem also exist on Arch. While using my Arch Linux (including ubuntu and fedora) my system hangs with a black screen with something written on the whole screen which cannot be pasted here as my system hangs and I have to push power button to restart.
So I check my errors.log file and found these errors
Jul 8 22:59:24 localhost kernel: [ 1.680013] ata3: softreset failed (device not ready)
Jul 8 22:59:24 localhost kernel: [ 7.298612] SP5100 TCO timer: mmio address 0xfec000f0 already in use
Jul 8 22:59:31 localhost kdm_greet[792]: Cannot load /usr/share/apps/kdm/faces/.default.face: No such file or directory
I have a HCL K21 pdc notebook
Note: In Ubuntu my notebook start with ata1: softreset failed error at boot time
Most often this error occur while watching videos or listening music with VLC
Last edited by Manuj19 (2011-07-09 10:13:24)

ewaller wrote:It might be better to just post the output of lspci -nn It will tell us a great deal more about the hardware related to the PCI bus, including specific chip set identifiers.
Thanks for suggestion
Here is output of lspci -nn
00:00.0 Host bridge [0600]: ATI Technologies Inc Device [1002:5a31] (rev 01)
00:01.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a3f]
00:04.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a36]
00:05.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a37]
00:06.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a38]
00:07.0 PCI bridge [0604]: ATI Technologies Inc RS480 PCI Bridge [1002:5a39]
00:12.0 SATA controller [0106]: ATI Technologies Inc SB600 Non-Raid-5 SATA [1002:4380]
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI0) [1002:4387]
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI1) [1002:4388]
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI2) [1002:4389]
00:13.3 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI3) [1002:438a]
00:13.4 USB Controller [0c03]: ATI Technologies Inc SB600 USB (OHCI4) [1002:438b]
00:13.5 USB Controller [0c03]: ATI Technologies Inc SB600 USB Controller (EHCI) [1002:4386]
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 13)
00:14.1 IDE interface [0101]: ATI Technologies Inc SB600 IDE [1002:438c]
00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383]
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB600 PCI to LPC Bridge [1002:438d]
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384]
01:05.0 VGA compatible controller [0300]: ATI Technologies Inc RC410 [Radeon Xpress 200M] [1002:5a62]
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
08:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b3)
08:01.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller [1180:0552] (rev 08)
08:01.2 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 17)
08:01.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 08)
08:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
Last edited by Manuj19 (2011-07-09 07:20:08)

[SOLVED] 'sl' package in arch linux?

Hello, I'm a former Ubuntu user. In Ubuntu I was able to install 'sl' package via
aptitute install sl
Now I use arch linux, and I'm unable to install sl package:
[user@myhost ~]$ sudo pacman -S sl
error: 'sl': could not find or read package
[user@myhost ~]$
Can you help pls? Thanks
Last edited by Pontorez (2010-07-21 14:09:22)

karol wrote:[slightly OT]
wonder, how do you search for things like 'sl', 'ne' : via the web interface or you use some AUR helper?
$ slurpy -i sl
Repository : aur
Name : sl
Version : 3.03-4
URL : http://www.tkl.iis.u-tokyo.ac.jp/~toyoda/index_e.html
AUR Page : http://aur.archlinux.org/packages.php?ID=12473
Category : games
Licenses : unknown
Number of Votes : 164
Out of Date : No
Description : SL (Steam Locomotive) runs across your terminal when you type "sl" as you meant to type "ls".

[SOLVED] Mount Points In Arch Linux

When I performed my initial testing install of Arch Linux today, and I was setting up mount points after I finished partitioning with Cfdisk, I was surprised to see that one of the precanned mount points in the Installer was /etc. On OpenBSD, we were warned against having /etc on its own partition, probably because so much important stuff lives there (like the fstab). I was also surprised to see /var wasn't in the precanned list.
Anyway, my question is, can you really have /etc on it's own partition? And does the exclusion of /var indicate a problem with it being on its own partition?
Last edited by NerveJessen (2010-04-02 12:50:38)

NerveJessen wrote:
It almost sounds like /var was accidently replaced by /etc.
EDIT: I'll look into the bug reporting procedures.
http://bugs.archlinux.org/
There is the FLySpray link, and there is a button at the top right of your screen as well.
Post back within this thread with your bug report, so other users may vote for the task once it has been assigned to a developer.
Welcome to Arch!

[SOLVED] Cookie settings for Arch Linux forum

I really do like the Arch Linux forum.
It is fast, plain and simple; perfect for a distro which is the same
But one thing is bothering me; the cookies.
The arch forum is the only forum for me where the 'new post' colored picture at the left side of the forum parts is not unmarked after reading the new posts.
After I have read all new posts, I do 'mark all topics as read' (the link at the right top) to have this result.
For example phpbb forums do have cookie settings where the forums which are read, automatically turn the 'new post' icon off; it is not colored but the normal color again.
Can it be that some forum settings are not completely right and this should be also the case at the Arch forums?
Hope I have explained it that way you can understand what I mean.
Jan
Last edited by Lontronics (2007-03-03 17:07:04)

Yes, and it has nothing to do with the cookie (except a session).. at least i hope it doesn't cuz that would just make me twice as glad that we switched away from that horrid chunk of code called phpbb.
And on that note, search around a bit, because this has already been explained like three times.

[Solved] Cannot ping my Arch linux pc from other devices

My newly installed arch linux pc is connected to my home network via wifi. I can successfully connect to the Internet. Also, I can successfully ping other devices on my network. However, I am unable to connect to my Arch linux pc from any other device on the network. As I said, I cannot even ping it from these other devices.
Does anyone have an idea as to what would cause this?
Last edited by mc33 (2015-05-12 20:29:06)

ewaller wrote:I have a hunch that the router does not know how to find your machine. Routers need to know to find which each IP address that is attached. Yours might not be smart enough to remember that an address that it did not assign talked to it over the wireless. When other computers try to talk to your address, it is clueless that you are on the wireless segment of the network, cannot find it on any wired ports, and (if it is not smart enough to figure out that it is not routable) will send it up stream or (if it is smart) will drop the packet. Try DHCP, or, ensure that the router itself knows that the static address has been assigned to your MAC. To do that, you will need to go into the router setup.
I switched my Arch box to Dhcp. I thought the problem had resolved, but the issue has come back even with Dhcp enabled. I have isolated the problem to the wireless router. If I refresh Dhcp on the router, I can then ping my Arch box from other devices again. Is there anything I can do to the router to resolve this? Again, the wireless router is an Asus RT-N66U.

[Solved] RAID 0 with Arch Linux and Intel Matrix Storage Manager

I just bought a brand new DELL Studio desktop and it has 2 500 HD's which I would like to run in RAID 0. I've setup the BIOS to run the RAID 0. Now I want the arch linux installation to recognise the volume. I followed the guide on the wikipage
http://wiki.archlinux.org/index.php/Ins … _Fake-RAID
but /dev/mapper doesn't show anything after modprobing the modules and installing dmraid. My controller is a intel matrix storage controller, so what module should I modprobe because sata_sil isn't the right one.
Regards
André
Last edited by fettouhi (2008-12-15 10:57:18)

you have a separate /boot partition, so your menu.lst must say :
root (hd0,0) # the partition including /boot
kernel /vmlinuz26 ... # without leading /boot
initrd /kernel26.img # without leading /boot
(in grub, / is the root of the partition that was set with the root command, your vmlinuz26 and kernel26.img are in (hd0,0)/, not in (hd0,0)/boot/)
did you install from core CD or from FTP ?
there was a dmraid update few weeks ago that modified device names that dmraid creates :
it add "p" before the number of the partition (your iws...Volume0 don't change, but your iws...Volume0# change to iws...Volume0p#)
if you installed from core CD, you will only need to add this "p" when you will upgrade dmraid (or the full system)
(you will then need to edit both /boot/grub/menu.lst and /etc/fstab)
if you installed from FTP, you need to add this "p" now, as you installed last version of dmraid

[SOLVED] Trying to install Arch Linux from harddisk using /dev/sda2

Hi
I'm trying to install Arch using my swap partition, following this wiki entry: https://wiki.archlinux.org/index.php/Ha … stallation
What I've done:
Downloaded ISO: archlinux-2010.05-netinstall-i686.iso
Command: swapoff /dev/sda2
Command: fdisk /dev/sda and changed the system type to 83 (Linux) on /dev/sda2
Now it looks like:
Command (m for help): p
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00017e5b
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1060289 530144+ 83 Linux
/dev/sda2 1060290 3164804 1052257+ 83 Linux
/dev/sda3 3164805 105579179 51207187+ 83 Linux
/dev/sda4 105579180 488392064 191406442+ 83 Linux
It complained about device was busy, but it still seemed to have changed the system type, so I did partprobe as it wrote.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.
The kernel still uses the old table. The new table will be used at
the next reboot or after you run partprobe(8) or kpartx(8)
Syncing disks.
[root@swamp ~]# partprobe
<no output>
Next I did:
[root@swamp ~]# dd if=archlinux-2010.05-netinstall-i686.iso of=/dev/sda2
327680+0 records in
327680+0 records out
167772160 bytes (168 MB) copied, 4.3025 s, 39.0 MB/s
[root@swamp ~]# mkdir /mnt/sda2
[root@swamp ~]# mount /dev/sda2 /mnt/sda2
mount: warning: /mnt/sda2 seems to be mounted read-only.
[root@swamp ~]# ls -al /mnt/sda2
total 150466
dr-xr-xr-x 3 root root 240 May 16 15:54 .
drwxr-xr-x 6 root root 4096 Nov 5 01:40 ..
dr-xr-xr-x 3 root root 556 May 16 15:52 boot
-r--r--r-- 1 root root 448 May 16 15:54 isomounts
-r--r--r-- 1 root root 8192 May 16 15:54 overlay.sqfs
-r--r--r-- 1 root root 154058752 May 16 15:54 root-image.sqfs
And unmounted it again.
The wiki page says to type: fsck -f /dev/sda2fsck, but I get no such file while trying to open sda2fsck.
[root@swamp ~]# fsck -f /dev/sda2fsck
fsck from util-linux-ng 2.18
e2fsck 1.41.12 (17-May-2010)
fsck.ext2: No such file or directory while trying to open /dev/sda2fsck
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
Can I ignore the above and continue modifying grub?
Thanks :-)
Last edited by valvet (2010-11-08 14:49:07)

fsck -f /dev/sda2fsck makes no sense because /dev/sda2fsck is not a deivce. If the wiki says that, then it is wrong. It's only doing a fsck anyway so probably not really needed. If you are just formatting th swap partition then use, mkfs.ext{234}.
edit:
from the wiki
# fsck -f /dev/sda2fsck 1.40.8 (13-Mar-2008)
e2fsck 1.40.8 (13-Mar-2008)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 3A: Optimizing directories
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/sda2: ***** FILE SYSTEM WAS MODIFIED *****
/dev/sda2: 243/78936 files (8.2% non-contiguous), 310519/314880 blocks
The first like should just be
# fsck -f /dev/sda2
Last edited by sand_man (2010-11-05 06:46:01)

Arch Linux being used for Point of Sale terminals?

There's a 90% chance that we're going to be getting in some new point of sale terminals for our retail store. They're standard x86 platforms that include a touchscreen, a card reader, thermal printer, a cash drawer, barcode scanner, external screen, and the like. It would be killer to install Arch on them and work them out to be completely functional terminals. Have any of you guys heard of some good point-of-sale software for Linux? I'm looking to do the basics, you know, scan a product, have it come up on a screen, calculate totals with tax, run a credit card, print a receipt ... that kind of thing.

synthead wrote:There's a 90% chance that we're going to be getting in some new point of sale terminals for our retail store. They're standard x86 platforms that include a touchscreen, a card reader, thermal printer, a cash drawer, barcode scanner, external screen, and the like. It would be killer to install Arch on them and work them out to be completely functional terminals. Have any of you guys heard of some good point-of-sale software for Linux? I'm looking to do the basics, you know, scan a product, have it come up on a screen, calculate totals with tax, run a credit card, print a receipt ... that kind of thing.
I'm interested in this as well.

[SOLVED]Gnome 2 in Arch Linux ??

Hi all
after installing the base system "Arch" it's time to setup the graphical interface so my question is :
how to install Gnome 2 classic , I have installed Gnome before with this command :
pacman -S install Gnome Gnome-extra
but I got the Gnome shell not the classic 1.
so what's the command to get the Gnome classic "version 2.3 or later".
I wanted to run Compiz on Arch but I couldn't use it because of the Gnome shell.
Last edited by YYaaSSeeRR (2012-09-16 05:47:45)

YYaaSSeeRR wrote:
tomk wrote:
Please try to understand at least the basics of Arch. Arch uses the latest stable versions from upstream projects - gnome 2 does not qualify.
Have a look at Mate, it might satisfy your need to turn back the clock.
thanks for the reply.
I'm learning day after day.
I have tried openSUSE and other distros but I really feel like I'm not learning anything with these distros because they have everything done for you just like Windows 7.
Learning is good. Just don't expect that the community here will fill the Windows 7-like gap in your computing life; read the wiki and search the web before posting.

[SOLVED] YubiKey logon in Arch Linux

I have a YubiKey NEO which I use for secure one time passwords, and I'm looking for a way to use this to replace (or maybe, in addition to) my Arch login password. Using Google, I see a few methods that use it for logging in with SSH, but I'm looking for something would work with my everyday logon.
Last edited by adeligen (2012-10-31 20:12:05)

I use this...
http://www.securixlive.com/yubipam/index.php
I don't know why the heck this package has not gotten more love? This will alow you to authenticate OTP on your computer. Then you just edit your /etc/pam.d files and you can use OTP to log into your laptop, sudo, su, kscreensaver, sshd .... anything that supports PAM auth.
That yubico-pam sucks, and dose not let you do what you want i.e. PAM auth with OTP localy
Last edited by hunterthomson (2012-10-31 22:27:21)

[SOLVED] (U)EFI dualboot Win7 Arch Linux - partitions gone - recovery?

Hi everybody,
I have a slight problem with my (U)EFI dualboot system (Windows 7 and Arch Linux) which used to be configured using rEFInd like it is described in my previous post:
https://bbs.archlinux.org/viewtopic.php … 6#p1300356
<EFI PARTITION> is /dev/sda1 and I used to boot via <EFI PARTITION>\EFI\Boot\Bootx64.efi which then successfully either loaded Windows or Linux kernel.
Thanks to my own stupidity and a recent update of refind I decided to copy the new driver, font and icon folders to the <EFI PARTITION> in order to be up-to-date.
After doing so, the rEFInd boot menu had a third icon which said "Boot via \EFI\Boot\Bootx64.efi" and if I clicked on it a second rEFInd boot menu appeared with only the two icons for Windows 7 and Arch.
So I figured I could delete Bootx64.efi and ultimately did so, unfortunately. Afterwards I couldn't boot neither Windows nor Linux anymore.
Following this I went through my noumerous USB boot sticks in order to be able to recover the Bootx64.efi. Unfortunately the first USB stick was a Windows XP one which has the plop bootloader alongside:
http://www.plop.at/en/bootmanager/thebootmanager.html
Out of couriousity I entered this bootloader and found HDA and HDB (I assume resembling my SSD and my USB stick).
To my knowledge I didn't change anything but after entering the bootloader again I just found HDA left, HDB seemed to be gone. But I didn't think of anything bad happening yet.
Then I found a working Archiso which I booted and using blkid I couldn't find the partitions of my earlier system anymore, only its device and the USB stick:
/dev/sda: PTUUID="..." PTTYPE="gpt"
/dev/sdb1: UUID="..." LABEL="ARCH_201312" TYPE="..." and so on
/dev/sdb2: SEC_TYPE="msdos" and so on
Even within the EFI shell I could not detect any internal drive anymore (only fs0: which is the USB stick)
Using Archiso onboard tool testdisk I could find the old partitions. The correct result of the GPT from testdisk is:
Fri Jul 4 08:45:25 2014
Command line: TestDisk
TestDisk 6.14, Data Recovery Utility, July 2013
Christophe GRENIER <[email protected]>
http://www.cgsecurity.org
OS: Linux, kernel 3.12.1-3-ARCH (#1 SMP PREEMPT Tue Nov 26 11:17:02 CET 2013) x86_64
Compiler: GCC 4.8
Compilation date: 2013-08-06T08:42:31
ext2fs lib: 1.42.8, ntfs lib: libntfs-3g, reiserfs lib: 0.3.0.5, ewf lib: none
/dev/sda: LBA, HPA, LBA48, DCO support
/dev/sda: size 500118192 sectors
/dev/sda: user_max 500118192 sectors
/dev/sda: native_max 500118192 sectors
/dev/sda: dco 500118192 sectors
Warning: can't get size for Disk /dev/mapper/control - 0 B - 1 sectors, sector size=512
Hard disk list
Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63, sector size=512 - Samsung SSD 840 PRO Series, S/N:S12RNEAD322171L, FW:DXM04B0Q
Disk /dev/sdb - 2013 MB / 1920 MiB - CHS 1022 62 62, sector size=512 - SMI USB DISK, FW:1100
Disk /dev/sdc - 4210 MB / 4015 MiB - CHS 1020 130 62, sector size=512 - Generic Flash Disk, FW:8.07
Disk /dev/mapper/arch_root-image - 1478 MB / 1410 MiB - 2887680 sectors, sector size=512
Disk /dev/dm-0 - 1478 MB / 1410 MiB - 2887680 sectors, sector size=512
Partition table type (auto): Intel
Disk /dev/sda - 256 GB / 238 GiB - Samsung SSD 840 PRO Series
Partition table type: EFI GPT
New options :
Dump : No
Align partition: Yes
Expert mode : Yes
Analyse Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63
hdr_size=92
hdr_lba_self=1
hdr_lba_alt=500118191 (expected 500118191)
hdr_lba_start=34
hdr_lba_end=500118158
hdr_lba_table=2
hdr_entries=128
hdr_entsz=128
hdr_size=92
hdr_lba_self=500118191
hdr_lba_alt=1 (expected 1)
hdr_lba_start=34
hdr_lba_end=500118158
hdr_lba_table=500118159
hdr_entries=128
hdr_entsz=128
Trying alternate GPT
Current partition structure:
Trying alternate GPT
search_part()
Disk /dev/sda - 256 GB / 238 GiB - CHS 31130 255 63
FAT32 at 0/32/33
FAT1 : 4110-6150
FAT2 : 6151-8191
start_rootdir : 8192 root cluster : 2
Data : 8192-2097151
sectors : 2097152
cluster_size : 8
no_of_cluster : 261120 (2 - 261121)
fat_length 2041 calculated 2041
set_FAT_info: name from BS used
FAT32 at 0/32/33
MS Data 2048 2099199 2097152 [NO NAME]
FAT32, blocksize=4096, 1073 MB / 1024 MiB
NTFS at 146/251/42
filesystem size 249593856
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
NTFS part_offset=1209008128, part_size=127792054272, sector_size=512
NTFS partition cannot be added (part_offset<part_size).
NTFS at 146/251/42
filesystem size 249593856
sectors_per_cluster 8
mft_lcn 786432
mftmirr_lcn 2
clusters_per_mft_record -10
clusters_per_index_record 1
MS Data 2361344 251955199 249593856
NTFS, blocksize=4096, 127 GB / 119 GiB
recover_EXT2: s_block_group_nr=0/160, s_mnt_count=1318/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 5242880
recover_EXT2: part_size 41943040
MS Data 251955200 293898239 41943040
ext4 blocksize=4096 Large file Sparse superblock, 21 GB / 20 GiB
recover_EXT2: s_block_group_nr=0/80, s_mnt_count=1317/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 2621440
recover_EXT2: part_size 20971520
MS Data 293898240 314869759 20971520
ext4 blocksize=4096 Large file Sparse superblock, 10 GB / 10 GiB
recover_EXT2: s_block_group_nr=0/706, s_mnt_count=1317/4294967295, s_blocks_per_group=32768, s_inodes_per_group=8192
recover_EXT2: s_blocksize=4096
recover_EXT2: s_blocks_count 23156049
recover_EXT2: part_size 185248392
MS Data 314869760 500118151 185248392
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
Results
P MS Data 2048 2099199 2097152 [NO NAME]
FAT32, blocksize=4096, 1073 MB / 1024 MiB
P MS Data 2361344 251955199 249593856
NTFS, blocksize=4096, 127 GB / 119 GiB
P MS Data 251955200 293898239 41943040
ext4 blocksize=4096 Large file Sparse superblock, 21 GB / 20 GiB
P MS Data 293898240 314869759 20971520
ext4 blocksize=4096 Large file Sparse superblock, 10 GB / 10 GiB
P MS Data 314869760 500118151 185248392
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
interface_write()
1 P MS Data 2048 2099199 2097152 [NO NAME]
2 P MS Data 2361344 251955199 249593856
3 P MS Data 251955200 293898239 41943040
4 P MS Data 293898240 314869759 20971520
5 P MS Data 314869760 500118151 185248392
simulate write!
TestDisk exited normally.
ext4 blocksize=4096 Large file Sparse superblock, 94 GB / 88 GiB
Now the question is: Can I - using testdisk or any other tool - recover those partitions successfully so I will be able to boot again afterwards? I tested and I could mark them as:
P Primary
Any help will be greately appreciated.
Best regards
Last edited by blablubb1234 (2014-07-08 09:20:08)

Issue resolved If you care to know how, read on:
Looking at the disk using gdisk was doing no good. Neither of the recovery options in gdisk did the trick.
I then returned to testdisk and restored the partitions (successfully). However, afterwards I was greeted by shell telling me the root device was not found (seems like UUIDs get changed when one restores them using testdisk). Adjusting the PARTUUID for root in <EFI SYSTEM PARTIITION>/boot/refind_linux.conf did the trick and I could boot up Archlinux again.
Windows 7 still didn't boot telling me the required device was inaccessible (probably wrong UUID, too). I could however not restore/edit Windows' BCD using bcdedit, see my post Status: 0xc0000225 boot selection failed; required device inaccessible:
To make a long story short: Removing bcd and running autorecovery from withing Windows RE successfully created a new bcd. Unfortunately, Windows writes its backup bootloader at <EFI SYSTEM PARTITION>/boot/EFI/Boot/bootx64.efi. This file originally was a copy of refind_x64.efi which I need to put at that location to be able to dualboot. After chrooting to my Arch system I could restore bootx64.efi, create a new fstab and everything is running fine now again.
Best regards and thanks for the help.

[SOLVED] Installing Windows XP after Arch Linux

I'm not sure at all where to post this, so I've decided to do it here since I have the problem on a laptop... Please move if it should be somewhere else.
I installed Arch Linux on my new laptop a month ago or so, and am very pleased to have found the very kind of distro I've been looking for. However, I'm having trouble with my graphics (either wine doesn't support it, or the drivers don't have 2D/3D acceleration), and now I want to install Windows XP next to Arch Linux.
Using a GParted LiveCD, I've repartitioned the harddrive as such: Unpartitioned Space (27GB), Linux (197GB), SWAP (5GB).
I've also removed the bootable flag from the Linux partition, just to be sure. However, when I try to install Windows XP, it gets stuck after unpacking a bunch of drivers, giving me a bluescreen that tells me to make sure the hardware isn't broken, check my harddrive with CHKDSK /F, or look for viruses. Ofcourse I know none of these are true, since I'm running Arch Linux just fine.
A friend suggested that maybe my hardware isn't supported by Windows XP, which sounds like the most reasonable explanation so far, but I can't find a list of supported hardware. The M$ homepage basicly says
"Pentium 233-megahertz (MHz) processor or faster (300 MHz is recommended)"
for CPU, which doesn't help me at all.
My hardware is:
Processor: Intel Celeron 2.2 Ghz
Memory: 2GB DDR2
Graphics: Intel 4500MHD
And the laptop is called an "eMachines E525", though that doesn't say much since there are very, very many called this.
Can anyone give me any hints as to what I might be doing wrong?
Last edited by Noxic (2010-05-29 18:44:32)

Sounds like something I'll want to do. Where did you download the drivers? Do I have to follow some guide? Thanks for the tip
EDIT:
Indeed I will want to install AHCI drivers, otherwise Arch Linux fails to boot quite badly. There is also a problem preventing me from booting when I'm using AHCI though;
At boot, Arch Linux checks /dev/sda1 (NTFS) for errors, and expects to check an ext2 filesystem. Obviously, however, /dev/sda1 is an NTFS filesystem.
Since it tries to read the NTFS partition as an ext2 filesystem, it panics. Arch Linux then prompts me for the root password (or Ctrl+D to reboot), but I've disabled root login and can therefore do nothing at this point.
I have a GParted livecd and the Arch Linux livecd, so editing files on any of the filesystem isn't a problem at all, but I don't know what to do at this point. Help?
Last edited by Noxic (2010-05-29 12:40:33)

[SOLVED] Configuring XFCE on Arch Linux to Use Uswsusp

Similar Messages

Maybe you are looking for