[Solved]Connection of my Arch PC via Ethernet stop all other connect

Hi all,
This is weird! I updated my arch pc today, and I realised that all other connection to the router (a UK skybox) stop.
Per example, if my Android phone is connected before the PC starts - the connection to the router remain live, but while trying to access a web page I have a you are offline page. If the phone isn't connected before the pc is started then the phone simply refuse to connect to the router!
Looking at the logs from the skybox no update was done recently - and booting the PC onto windows and it all work normally.
I am connected via ethernet with a local static IP.
I have no idea where to look, any suggestion would be greatly appreciated.
Thanks,
Last edited by sweetthdevil (2014-03-10 17:06:02)

Hello,
and thank you for your time and interest.
Follow the answer to your question:
[sweetth@linuxbox ~]$ ping 66.211.214.131
PING 66.211.214.131 (66.211.214.131) 56(84) bytes of data.
64 bytes from 66.211.214.131: icmp_seq=1 ttl=50 time=130 ms
64 bytes from 66.211.214.131: icmp_seq=2 ttl=50 time=131 ms
64 bytes from 66.211.214.131: icmp_seq=3 ttl=50 time=130 ms
64 bytes from 66.211.214.131: icmp_seq=4 ttl=50 time=130 ms
64 bytes from 66.211.214.131: icmp_seq=5 ttl=50 time=131 ms
64 bytes from 66.211.214.131: icmp_seq=6 ttl=50 time=130 ms
64 bytes from 66.211.214.131: icmp_seq=7 ttl=50 time=131 ms
64 bytes from 66.211.214.131: icmp_seq=8 ttl=50 time=131 ms
64 bytes from 66.211.214.131: icmp_seq=9 ttl=50 time=131 ms
^C
--- 66.211.214.131 ping statistics ---
9 packets transmitted, 9 received, 0% packet loss, time 8011ms
rtt min/avg/max/mdev = 130.104/131.037/131.844/0.668 ms
[sweetth@linuxbox ~]$ ip route
default via 192.168.1.86 dev eth0
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.95
My netctl profile
Description='A basic static ethernet connection'
Interface=eth0
Connection=ethernet
IP=static
Address='192.168.1.95/24'
#Routes=('192.168.0.0/24 via 192.168.1.2')
Gateway='192.168.1.86'
DNS=('192.168.1.86')
## For IPv6 autoconfiguration
#IP6=stateless
## For IPv6 static address configuration
#IP6=static
#Address6=('1234:5678:9abc:def::1/64' '1234:3456::123/96')
#Routes6=('abcd::1234')
#Gateway6='1234:0:123::abcd'
I am so much looking forward for your reply and fixing this!
Cheers

Similar Messages

WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none receive

Hi,
WIFI stopped working after I woke the computer up, now says connected to the network but not the internet, all other coputers and devices connected still with no problems, have pinged IP address from router and got the message "4 packets sent none received"... Help
I have tried network diagnostics which doesnt help... The only other ting is, when I woke the computer up it said tat another device was using my IP... My wife had plugged her phone into the computer to charge etc but even when i turn wifi off on the phone there is no change... also in settings on the phone the IP address is different...

The answer to your question is - neither!
Your PC should to configured to obtain an IP address automatically, and to obtain DNS server IP addresses automatically, from the Airport Express. This is the way Windows (and Macs for that matter) are configued by default, and that is the way most people have their computers set up. If you manually configured your PC's IP address to be the same as your wife's Mac, it certainly explains why your PC is not able to access the internet.

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,etc

New imac 27(Intel based,bought 2013) slow wifi connection with my Verizon fios actiontec router. All other wireless devices in the house(ipad 3gen,MacBook Air ,hp laptop) have a much faster connection. Should I change router settings to G only,switch channel from auto to maybe 6,channel width to 20mhz? Already changed security settings to WPA2. Currently router is running in mixed b and g mode.

If you have one computer running on G they will all run on G. All ROUTERS are backward compatible, in otherwords if you have a group of computers and all of them are N compatible and one or two are G They will all work but the N computers will run at N and those that are G will run at G speed not N.
It can get confusing but really it is simple. The newest is 802.11 AC and ic used with the newest Mac Computers made available in November 2013. So if you have the newest Airport Extreme that is 802.11ac and the newest computers that are AC compliant your speed will be 5 times faster than anything on the market right now.

Machine connected to Extreme Base Statiom via ethernet wont print

My wireless network works really well exccept that the one Imac connected via Ethernet cable to the Extreme Base Station will not print on the
printer connected to the Base Station USB port, but can
see the Internet etc. All the wireless clients, of all types can print to printer etc.
A Colleague of mine also has exactly the same problem on his network.
Does anyone know how to solve this problem?

David, Welcome to the discussion area!
What version of the Mac OS is the iMac running?

Airport Extreme: How to connect a Linksys VOIP device via ethernet

Hi there!
I am trying to connect Linksys PAP2T device via ethernet to my Aiport Extreme. It gets an address assigned 10.0.1.2 but when I access the device, I am not able to connect to internet. Do I need to key in my network password anywhere?

Okay, so to answer my own question after considerable sleuthing . . . for anyone else trying to do this:
Connect your computer to the bridge using an ethernet cable, then open a browser and enter the following address: http://169.254.1.250
This will take you to a login page: leave the username field blank, enter "admin" in the password.
You will see the Cisco setup page. I selected manual setup and entered the name of my network and password. I got a progress bar and finally the wireless network light on the bridge started flickering.

Netgear wireless router won't connect to my HP Pavilion via ethernet cable

I had bought the Netgear LT wireless router for my home and I cannot get my Pavilion PC to connect via the ethernet cable. All of our tablets will connect wirelessly as well as my laptop. The laptop will also connect using the ethernet cable. I had used a wireless broadband card on my PC for that last several years without a problem, now I can't seem to connect to the internet with this new tool. When I do try to connect, a pop-up screen appears with suggestions of using the connections from the past (ie. dial-up, broadband, mobil), but does not show an option for this new router.
Someone had suggest that I may need to get an updated driver for the ehternet card, and if so, how to I get said updated driver to instal over to my PC without being connected to the internet? I've tried to reconfigure and add a "new network" connection without any luck and have uninstalled the old programs pertaining to the old connection devices.
As of now, I'm having to download my business materials on my laptop, then transfer the files to the PC via thumb drives. I'm sure I'm just overlooking something rather simple, as it is usually the case for most, I imagine. Can anyone give me another alternative to fix this issue? I plan on leaving the PC connected to the router via ethernet, while using the wireless WiFi for the other devices.
Thank you in advance!!

Hi,
Please post the HP product number for your PC. How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers. This will allow others to review your issue, make suggestions and review your responses. This is usually the best way to get assistance. Additionally, what operating system are you using?
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Connecting G3 OS 8.6 via Ethernet to AEBS

Have been using an old D-Link router to connect G4 10.5.8 via airport, Macbook 10.5.8 via airport, Windows laptop XP via wireless and G3 OS 8.6 via ethernet. The G3 because it seems to be the only option for an old, slow but still nice quality printing on a Personal Laserwriter.
In order to improve speed and range bought an Airport Extreme Base Station and all the wireless connections are as predicted faster and range is much better.
But ethernet connection to the G3 doesn't work. Perhaps I need to manually insert router settings in TCP/IP?

gasmac wrote:
Have been using an old D-Link router to connect G4 10.5.8 via airport, Macbook 10.5.8 via airport, Windows laptop XP via wireless and G3 OS 8.6 via ethernet. The G3 because it seems to be the only option for an old, slow but still nice quality printing on a Personal Laserwriter.
In order to improve speed and range bought an Airport Extreme Base Station and all the wireless connections are as predicted faster and range is much better.
But ethernet connection to the G3 doesn't work. Perhaps I need to manually insert router settings in TCP/IP?
A while ago Ethernet ports needed to be connected with the right type of cable: "cross-over" or "straight through". At some point Apple switched to "auto-sensing" Ethernet ports. Your G3 may predate that switch. What I don't know is whether you need one or the other type of cable if one device is auto-sensing and the other device isn't.
When you connect the G3 to the AirPort Extreme unit, is the green light at that Ethernet port on the AirPort unit green? If it is, then the AirPort unit is recognizing that there's a device connected to that port.
I don't remember OS 8.6 well enough to give you any advice about Ethernet configuration. However, there's a "Mac OS 8.x" section in the "Older software products" area of Apple's discussion groups where you may find someone who can help.

Connecting ibook and Power Mac via Ethernet

Is it possible to connect my ibook g4, with my Power Mac G4 via ethernet? I simply want to make it so I can swap files between the two. They're both running Tiger, 10.4.11, if that means anything at all. Any help would be greatly appreciated.

Mac OS X file sharing ( hope you know another language than english ). You need to go into sharing & turn on file sharing. It will share your public folder.
http://docs.info.apple.com/article.html?artnum=106461
The Mac OS client shares the the public folder. You may try putting an alias in your public folder to the flash drive. To share the flash drive directly, you need SharePoints.
The Mac OS X client version contains most of the sharing software. It doesn't contain an extensive GUI for manipulating the software configuration.
"SharePoints is an application or a preference pane that makes it easy to add and delete share points like in the old Finder. In Mac OS X, by default, you are limited to sharing only what is in your public folder in your home directory. This program makes it easy to share any folder."
http://www.hornware.com/sharepoints/
Mac OS includes support for NFS, the native Unix network file sharing system. You may share files between Mac OS X systems with NFS as well as other Unix Systems. However, the documentation on how you make the shares is rather limited. Once you learn how to configure the net info database with the netinfo command, the shares are not too hard to make.
"NFS Manager is a graphical user interface to control all built-in NFS features of Mac OS X. "
http://www.bresink.de/osx/NFSManager.html

Connecting Macbook with Time Capsule via Ethernet

Hello!
I have a time capsule and a macbook. I used to backup my data with the time capsule via ethernet. Now there was an update to airport I guess and since then the menue to configure the time capsule looks different and now I have trouble finding out how to set up the connection between macbook and time capsule via ethernet. I dont want the WLAN to be used so I want the ethernet be the connecting part of both esp because i want to backup lots of data now but Im missing the setting that said use use time capsule via ethernet. I just dont know how to set it up now.
I have the ethernet cable in the very left ethernet slot next to the reset button of the time capsule and its also plugged in to the ethernet slot on the macbook. But what are the settings for this connection.
Can someone help please otherwise i think my 23GB backup will take 3 days...
Thanks in advance
Dine

Open the network preferences and make sure the ethernet is getting an IP from the TC.. you do not need to change any settings .. all you need is network connection.. if the ethernet is working just turn off airport for the time the backup is going on. Once you turn off airport in the MBP the connection will be forced to ethernet. You can do it more correctly by rearranging the order of preference for network connection.. but for now.. just turn off airport.

Cannot connect devices using Extend Network via Ethernet

Hi
I have been going nuts with this issue, and cannot seem to find any solutions. PLEASE HELP!
I have an Airport Extreme (pretty new and all up to date) connected to my modem. Everything works perfectly. The wi-fi is great, all devices can connect without any issues so nothing is wrong here. The Airport extreme is dishing out the IP addresses etc. The Airport extreme is in the lounge.
I purchased a new airport express yesterday. I put it in my study, far away from the lounge. I connected the airport extreme to the airport express using an ethernet cable. I plugged it in, and set it up to extend the wireless network via ethernet. I.e. it is set up in bridged mode and set up to 'create a wireless network' with identical name password etc. Everything is good. It reboots and the light is green. in the Airport utility everything shows up correctly.
Here is the problem., The second that any device (lets say iphone) moves from the lounge to the study, and tries to 'jump' to the stronger network provided by the express, it kills the ENTIRE network. The following happens:
1. The iphone loses wi-fi signal immediately. If I go into wi-fi settings, it sees my netwrok with FULL strength, but just remains in the 'spinning ball' state trying to connect. Seems to me that the express is unable to hand out an IP address or something.
2. If i open the airport utility on my Imac (in the study), the airport extreme has a yellow warning light and cannot be found via ethernet OR wi-fi. (The Imac is also Hard Wired from the Airport extreme in the lounge).
THe whole system requires a re-boot in order to work again.
If I re-boot the system, and leave a device near the airport express, it immediately receives signal, gets an IP address, and has an internet connection. Going back to the lounge causes no issues, it doesnt drop signal and still connects to the internet via the extreme. But as soon as I walk back into the study again - BOOM, everything drops.
I only purchased the new express because i was having EXACTLY the same issue with an older Airport extreme. No matter what I do, it just wont work via ethernet. I have tried all manner of settings. The ONLY setting that seems to work is to extend the wi-fi network. However, the rooms are too far apart, and this will require a third station in the middle, which i want to avoid (by the time the wifi network is extended across 3 decvices it is too slow).

Can I use airport express to make my pc pick up the wifi by plugging the pc into the ethernet socket?
Yes. But, it is the AirPort Express that would "pick up the wifi". Then, you would connect an Ethernet cable from the AirPort Express to the PC.
Configure the AirPort Express to "Join a wireless network" and click the option to "Enable Ethernet clients" during the setup to activate the Ethernet port on the device.
I would also plug a printer (currently connected to the pc) into the usb, so it can become a shared printer.
There is a good chance that your printer will work connected this way, but you won't really know until you try.

Problem connecting switch to Airport Extreme via ethernet

I might not be in the right forum with this question, as it relates to connecting the Airport Extreme in a wired / ethernet configuration. I am okay with the wireless functions. This is the only forum I could find dedicated to Airport issues.
I want to provide Internet via ethernet cable to multiple devices that are 20 feet away from my Airport Extreme. When I connect one of the LAN ports on the Extreme to a NetGear switch, I get no Internet connectivity from any of the other available ports on the switch. I have tested the cables and they are fine, and I do get Internet connectivity if I plug the ethernet cable coming out of one of the LAN ports on the Extreme directly into a device (Bluray player) rather than go through the switch.
My setup is as follows: Modem --> old Netgear FWAG114 wired / wireless router --> AirPort Extreme (wired connection, into the WAN port). My iMac is connected via ethernet to the Extreme, and an HP6500 printer is connected via both ethernet and USB (is that redundant?). I want to connect another available LAN port to the switch on the other side of the room.
A friend suggested that it may be that I need to configure the Extreme to permit multiple IP addresses to be made available through the switch, but I am not tech-savvy enough to understand if that's the issue and, if so, how to accomplish it.
Thanks in advance for any help you can provide!

I am copying some of the instructions from the NetGear FWAG114 router, which lead me to believe that it is a managed switch:
"LAN IP Address Management
By default, the [NETGEAR] router will function as a DHCP (Dynamic Host Configuration Protocol) server, providing TCP/IP configuration for all computers connected to the router's LAN.
If another device on your network will be the DHCP server, or if you will manually configure all devices, select the Disable DHCP Server option.
If the DHCP server is located on the Internet side of the router, select the Use External DHCP Server option, and specify the external DHCP IP address.
To use the router as DHCP server (the default option), select Use Router as DHCP Serveroption.
Starting IP Address: This box specifies the first of the contiguous addresses in the IP address pool. 192.168.0.2 is the default start address.
Ending IP Address: This box specifies the last of the contiguous addresses in the IP address pool. 192.168.0.51 is the default ending address."
Should I elect to have the Netgear use an external DHCP Server and let the AEBSn be the DHCP server?

Connecting Canon LBP9100cdn Laser printer via ethernet/wifi hub

I have connected my Canon LBP9100cdn Laser printer via ethernet through a modem hub. We can connect either through direct ethernet hard connection or wifi, on OS10.8.3. Occasionally it just stops finding the printer. Have latest CUPS driver, have reset printing system and reinstalled driver and reinstalled printer. Turned printer off and on. Sometimes it takes a few goes to get the right random sequence, but this time I just can't get it to connect. Other computers on the system, both ethernet hard wired and wifi can still connect- all on the same operating system.

When you get this lost connection, try opening Safari (or web browser of choice) and enter the IP address of the 9100 as the URL. This should connect to the internal web page of the printer. If this does connect, then see if you can resume the queue to print again. In theory, if the print queue on the Mac pauses, then the web browser test should also fail to connect to the printer.

Connect two AEBSn wirelessly or via Ethernet

I'm considering extending my wireless network by adding another AEBS or Time Capsule. It's about 60 feet (and three interior walls) between my current AEBS and our living room. If I get another router and put it in the living room, I can connect wirelessly between the two (but still through the walls) or run an ethernet cat6 cable to connect them. I have a PS3 and AppleTV in the living room. We also have macbooks that connect wirelessly.
If anything connected to the second router would have to share the single connection back to the primary router, would this slow everything down for them, similar to splitting a signal with a hub? Or are router's smarter than that? Just not sure how to proceed.
Thanks in advance. If this is already addressed somewhere, just point me to the appropriate topic. Did some searches, but hadn't found this specifically addressed.

Yes, they would both share the internet connection. I am using wildblue satellite, with a 1.5 mbps (~190K) download connection. I just didn't want the ps3/appleTV/3 Macbooks to bog the whole thing down, and thought if I had two wireless access points, and different things attached to different routers (and probably hardwire the appleTV and the PS3 to the router in the living room) that I would get fast connections everywhere.
Everything can connect at wireless n speed except the PS3. Directly connecting to the router would fix the wireless G speed bottleneck (if it actually exists).

ESATA: connecting 2 mac pro's via esata to each other

has anyone tried to connect 2 mac pro's via esata directly to each other (instead of the slower ethernet connection)? i was hoping to install esata cards into the pci-express slots into 2 mac pros and instead of the usual ethernet connection between the 2 so they can file share, i was hoping for a faster estata connection if that is possible. would i see the computers in the usual finder window under "shared?" note: the mac pro's would be physically close to each other, so cable length connection is a non issue.

Hopefully no one would try this.
NAS or FiberChannel like Apple did with XRAID.
OS X client is not designed to handle file-locking and device sharing, not in this manner.
Linux or HP type media servers

Wifi connection unreliable only on my HP 23-h020a, all other devices work fine

We have just bought two brand new HP devices but are having major problems with the pavilion 23-020a. Basically the wifi connection is rubbish! All other devices in the house work fine and the PC itself is only a couple of meters from the modem and showing full connectivity. However we cannot reliably get internet connection when using wifi. Sometimes it's fine for a couple of minutes, some pages load, some don't, if my kids are in the middle if doing their home work when it comes to them moving on to the next page to do their online test, the page won't load and all their work is lost. This is totally unacceptable! If we connect using the Ethernet cable it's fine but to do that we have to have two meters of cable running across our sitting room. I need this resolved! We have tried all available wifi channels and nothing has helped. I hope someone here can! Thanks

Hello @Nzbeales,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you have just purchased 2 HP devices and the HP Touchsmart ENVY 23-h020a All-In-One Desktop PC is having wireless issues and you would like to see it resolved. Given how new the computer is I would like you to please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. On a new unit you want to ensure that everything is working as it should and that any issues you may have are documented correctly.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

[Solved]Connection of my Arch PC via Ethernet stop all other connect

Similar Messages

Maybe you are looking for