[solved] CUPS: "Unplugged or turned off"

CUPS reports
Paused - "Unplugged or turned off"
against USB printer, while the printer is attacked:
~ $ sudo lsusb -vvv -d 0482:0015
Bus 002 Device 002: ID 0482:0015 Kyocera Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.01
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0482 Kyocera Corp.
idProduct 0x0015
bcdDevice 0.00
iManufacturer 1 Kyocera
iProduct 2 Kyocera FS-1030D
iSerial 3 XLL7715236
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
~ $
Where to dig in?
As far as there was long period I didn't use the printer, I can not guess about the update being a reason of the problem.
Last edited by student975 (2014-04-27 20:02:24)

OK, I have removed and readded the printer via CUPS WEB interface, and all does work again.

Similar Messages

[SOLVED] How can I turn off the annoying auto indent tabs in VIM?

I'm coding in Python and VIM is auto-tabbing each new line. It's a real buzz kill.
When I hit enter at the left margine, even when there is nothing on the line above the cursor, it shoots out a tab and three spaces. I've switched to nano but feel lost without VIM. I've never seen this behavior before. I've turned off all of the auto indentation options I can think of.
***** begin .vimrc *****
set noautoindent
set nosmartindent
set noindentexpr
set nocindent
***** end .vimrc *****
Thanks!
[UPDATE]
I wish I could delete this post. ... anyway... the solution was:
set indentexpr=''
Last edited by TomB17 (2009-09-03 16:41:07)

Unfortunately, I have to do a ":set indexexpr='' " each time I start VIM. I've got it in the .vimrc but it seems to be ignored.
I'm used to Ubuntu and this feels really weird. It's like profiles aren't processed.
I would appreciate it if somoeone would point me in the correct direction.
Last edited by TomB17 (2009-09-03 21:03:20)

HT4528 Is it better to leave iPhone plugged in overnight or unplug and turn off?

Is it better to leave iPhone plugged in all or turn off after 100%?

Neither will have harmful effects on the battery. I would leave it overnight so it is still 100% charged when you wake up.

[solved] How do I turn off SMART warnings in Gnome?

I run the smartd daemon for the 8 hard drives in my server. One drive has about 90 bad sectors so it will most likely fail soon. But I can't return it unless it hits 100. Anyway, in Gnome, I keep getting warnings in that notification section in the bottom that the drive is failing and it's annoying me to no end. How can I turn off these warnings? Smartd mails me every detail anyway, I really don't need these constant warnings in my desktop environment as well.
Last edited by HyperBaton (2011-06-06 09:31:57)

I'm not entirely sure if i got your setup right, but you could try to disable parts of the gnome-settings-daemon via dconf. Have a look at org.gnome.settings-daemon.plugins, especially at "householding". Either try a higher value for "min-notify-period":
Specify a time in minutes. Subsequent warnings for a volume will not appear more often than this period.
Or uncheck "active" for a more radical solution.

Nano turns off after unplugging from computer

My nano works fine, if its plugged into my computer. When I eject and then unplug it turns off and I can't get it to turn back on. Once I managed to unplug and get it to turn on, then turned it off then I tried to turn it on again 5 mins later but nothing. Battery says it's off and I go through making sure everything is off or paused at least before unplugging but same result everytime.

I think this is ridiculous. I got the iPod nano 4th generation (8gb) this summer and my click wheel isn't working. Apple is making a huge mistake by ignoring our emails which could lead to business loss.
But!! I know how to get it working (for a while).
You just leave your ipod alone for about a week or two. And it's completely responsive. But unfortunately if you plug it into the computer, the wheel will become unresponsive again. It costs more to fix than to buy. <-- Crazy
The only thing is that i've lost the reciept ¬¬' But if you go to an official apple store. I've got a great excuse or whatever to why you deserve a new ipod or money back. It is 3 years garentee and it has only been made for 2 years.
Going to the store soon so i'll see if i can give you guys some info.

My ibook loses battery power when turned off and unplugged

I have been puzzled by this since November 2006. I calibrated my battery twice as prescribed and still, as soon as i shut down my ibook and unplug it, it's battery charge goes down. Why is this? I'd greatly appreciate help. I'm a former pc user and none of my pc laptops have this problem. I just want to know why my battery loss power when unplugged and turned off. thanks in advance

Well you might want to try what they call "battery reconditioning" which is 7 simple steps listed below:
1: Charge your iPod fully.
2: Use it till you cant trun it on anymore!
3: Then carge your iPod fully again.
4: Then Use it till you cant trun it on anymore!
5: One more time charge your iPod fully.
6: And then again Use it till you cant trun it on anymore!
7: Then one last time charge it fully again.
Reminder: it is best to let the battery die all of the way each time inbetween chages. for example if it has 60% battery life dont charge it use it till it is dead and then charge it up all the way!
*This should inturn maximise your battey life also!*

When i unplug my iphone it turns off why?

Iphone fell on the floor, the only way the phone turns on is to plug it in, as soon as I unplug it turns off. HELP!!!!!

Probably it needs a new battery.

IPad turns off as soon as it is uplugged

My iPad would not start up. I tried plugging it into the wall and it turned on and said 100% charged. As soon as I unpugged it it turned off. After a little while, it restarted only to indicate 3% charged. Again, as soon as it was unplugged it turned off. I have tried resetting with th power and home buttons as well as through the Settings. No luck. I have also tried connecting it to my MacBook Pro but it is not recognized through iTunes.

The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

I'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

'm sure your'e going to tell me I just need a new phone but maybe there is hope for my iphone 4. It will not charge past 66% (it's not the charger), it turns off when unplugged, and it will not even let me turn my wi fi to the on possition. Help!

Hi there 8472kck!
I have some information for you that can help you troubleshoot this issue a little further. That information can be found right here:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
and that information comes from this article:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

Install Maverick and now When I turn off my mac air, takes 2 minutes. Why? As I can solve?

Hi Linda,
Unplugging it from AC power will drain the PRAM Battery in short order, thereby losing setting, like Monitor resolution.
You can test the Pram Battery by disconnecting from the Internet so Date/Time doesn't update before you see it, shutdown, unplug AC for a bit, startup & check Time.
In Sys Pefs>Displays, can you set the resolution?

6th generation iPod nano automatically turns off when I push het sleep/wake button or when screen turns black after a while. How can I solve this ?

My 6th generation iPod nano automatically turns off (=stops the music) when I push het sleep/wake button or when screen turns black for power saving mode. Does anyone know how to solve this ?
I have already tried resetting, connecting to PC/iTunes to check the software version, turning off/on, I don't have any inspiration anymore.
Thanks for your suggestions!

Hi VeerleD,
If your iPod touch unexpectedly powers off, you may want to use the steps in this article to troubleshoot -
iPhone: Hardware troubleshooting (The steps apply for the iPod touch) -
Specifically -
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for using Apple Support Communities.
Best,
Brett L

My Airport Time Capsule only works when I turn off and turn on, but I think this may end up with the unit. What can this happening and how to solve?

Time Capsule Airport
Hello to all, good day, sorry my english google, but it is the tool I have at the moment. I'm having trouble with my Time Capsule Airport, I made all the settings according to the manual, but there has been a connection problem with my iMac. When I finish my work I turn off the imac and then again when they return to work and care, it can not connect to Time Capsule Airport, making it impossible to remove the files and make back up by Time Machine only works when I turn off and turn on the Airport Time Capsule , but I think this may end up with the unit. What can this happening and how to solve? Thank you.
Olá a todos, bom dia, desculpe meu inglês google, mas é a ferramenta que tenho no momento. Estou tendo dificuldades com a minha Airport Time Capsule, fiz todas as configurações de acordo com o manual, mas tem existido um problema de conexão com meu iMac. Quando termino meus trabalhos desligo o imac e depois quando retorno pra trabalhar novamente e ligo, ele não se conecta a Airport Time Capsule, impossibilitando retirar os arquivos e fazer o back-up pelo Time Machine, só funciona quando desligo e ligo a Airport Time Capsule, mas acho que isso pode acabar com o aparelho. O que pode esta acontecendo e como resolver? Obrigado.

This is easier to do with pictures perhaps.. since we do not share a common language and machine translation leaves a lot to be desired.
In the airport utility bring up your Time Capsule.
Simply post the screenshots here.
So here is mine.
Click on the Edit button and give us the Internet and Wireless and Network tab..
eg.
Please also make sure you are set to ipv6 in your wireless or ethernet .. whichever is used.. and do tell which.
This is wifi in your computer.
The following are important..
DO not use long names with spaces and non-alphanumeric names.
Use short names, no spaces and pure alphanumeric.
eg TC name. TCgen5
Wireless name TCwifi
Use WPA2 Personal security with 10-20 character pure alphanumeric password.
read apple instructions to help with TM and TC.. they did finally admit it has issues in Mavericks.
OS X Mavericks: Time Machine problems
Mount the TC manually in finder.
AFP://TCgen5.local
When asked for the password .. that is the disk access password and save it in the keychain.
Reset Time Machine
See A4 here. http://pondini.org/TM/Troubleshooting.html

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring,so i open cimcas now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

Hello i have a unusual problem,anyway my iphone 4 wont turn on and when someone calls they hear ringing,but my phone doesent ring.So i poen simcase and now ring off. Screen is just black,because it's turned off..Please help me to solve this problem..Thanks

As far as trying to power up your device, make sure it has a good charge and then hold the button on the top of the phone and the home button on the faceplate together until the apple appears on the screen.

IPhone 5s starts over playlist every time car is turned off and one or gets unplugged from car stereo

So I have a iPhone 5s and every single freaking time I turn the car off and then back on / or unplug the phone it starts playing music from the very first song alphabetically so basically what that means is every time I turn the car off and on the same stupid song plays every single freaking time I turn my car on!!!! I am ready to throw this phone like a frisbee over this. I play my music off of playlists I set up and I play them on shuffle but for whatever reason (now this didn't happen much in the past with my 4s, however towards the end of the 4s last couple months I had it... it was starting to get a little weird as well with where it stopped and started on the playlist when the car was turned off but nothing like this 5s) but with the new 5S every single time the car stereo get turned off and then on it does this. I have a newer car stereo probably three years old with a USB sticking out of the front so you just plug the USB directly into the face and it goes straight in and should function in theory but this is crap. I use authentic Apple USB cables for the 5S but just cannot figure this out I've made sure I do not have repeat on I've turned shuffle off turn shuffle back on sync iPhone etc.... what the heck s the problem? For such an expensive phone and a Supposed highly advanced technology by Apple this should be the last thing this phone should be doing. Is it the phone or is it the software whatever it is this is a serious problem for because when it comes to my music you don't mess with my music! I have mentioned this to other 5S owners and they have also experienced the same issue with their car stereos well. Why is it such a mind-boggling problem to just have the song play from where you left it? I thought maybe updating the phone with the latest and greatest software update with maybe fix the problem but no it didn't do a single thing. HELP!!!!! :(

Status update: I tried my roommates iPhone five and I got similar results disappearing playlist when phone is disconnected or stereo is turned off in car, starts playing songs alphabetically when turned back on were plugged back in. So I know it's just not my phone it's a more universal problem with the 5 / 5S. I talk about this problem with customers I come a cross at work some have similar problems. I also try my phone on their car stereo and I also get similar results. My roommate who has the iPhone 5 recently got rid of it and got a Samsung note 3 this phone has no problem remembering where it was in the song when it was disconnected from the car stereo just like it's supposed to it just works. You turn the car off music stops turn the car on music begins playing where it was on the playlist it was playing in the same exact order it doesn't give you problems like the iPhone 5 / 5s. Also some customers I have talked to who have the 5C don't seem to really have this problem.

When I plug a LaCie external hard drive into my new Mac mini, [os 10.9.1], to use with Time Machine it effects the performance of my internet and email. Turn off Time Machine and unplug the hard drive and the internet and email are working normally again

When I plug a LaCie external hard drive to work with Time Machine into my new Mac mini, [OS 10.9.1] it drastically effects the performance of the internet and email, turn off Time Machine, unplug the hard drive, internet and email go back to normal. Why?

Maybe:
http://www.macobserver.com/tmo/article/usb-3.0-hard-drives-can-cause-wi-fi-inter ference

[solved] CUPS: "Unplugged or turned off"

Similar Messages

Maybe you are looking for