[SOLVED] Daemon autostarting even after disabling it.

Hello.
Well, after a few problems I reinstalled mpd and ncmpcpp, because desperate attempts at trying to fix software mixing, but that's not really the problem.
Anyways, disabled mpd via systemctl (both mpd and mpd.service, both as root and as --user), it still autostarts, and I have to pkill it in order to be able to get my music.
I'm not quite sure what files to paste, or for that matter even what gets it to autostart. It starts with system, not at login or xorg. I'm not sure what more info i can supply.
Last edited by oniichan (2013-01-21 20:02:17)

oniichan wrote:Mentioning that.. I do have "mpdscribble" installed.. Does that conflict?
Read the service file:
$ cat /var/abs/community/mpdscribble/service
[Unit]
Description=last.fm updater for MPD
Wants=mpd.service
After=mpd.service
[Service]
Type=forking
PIDFile=/run/mpdscribble.pid
ExecStart=/usr/bin/mpdscribble --pidfile /run/mpdscribble.pid
[Install]
WantedBy=multi-user.target

Similar Messages

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker while calling

My 4s Goes to speakerphone automatically while calling and does not go back to normal even after disabling speaker phone button
AlsO sometimes I. Cannot hear anything in normal speaker even though the call Is going through and has been re ieved on the other end, I have to enable speaker and then disable it to route audio to normal speakers

I think that it is something wrong with kernel and graphic drivers but i'm not able to solve it from the beginning of using of Arch by me.
I'm not so sure this issue is software-related only because in my case it seems the laptop screen enters power-saving mode (10-min timeout) on its own without any events logged (as shown by dmesg) so my next thought was OK, I'm going to get rid of this issue disabling the screen power-saving timeout in the BIOS and set it to never power down or something like that and from then on managing power mode manually; ie: when I want to power down I will just use systemctl suspend/hibernate which work fine ... problem is: there are no related options in my BIOS for such timeout.
The only timeouts I have are in /etc/systemd/logind.conf set to 30min (#IdleActionSec) (commented) by default so these are not in effect because the screens goes blank after 10m which is less than the (default) 30m in logind. Maybe setting loggind to 9m (un-commented) to catch the event before the machine-default one ?
IdleActionSec=9min
IdleAction=suspend
Will check it and report back.

AMD GPU fan runs constantly even after disabling DGPU

I have a HP-Pavilion dv6 6121TX, with AMD 6770m gpu.
The fan of the gpu runs constantly even after disabling it using the following command
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
the output for "cat /sys/kernel/debug/vgaswitcheroo/switch" is as follows
0:DIS: :Off:0000:01:00.0
1:IGD:+:Pwr:0000:00:02.0
It shows that the DGPU is off and yet the fan for the same runs continuously at full speed.
Would be really grateful for any suggestions.
Thank you.

You might also try a different battery if you have access to one. Unfortunately, many of the replacement batteries being shipped by Apple are defective. They don't fit properly into the battery bay. I suspect that if the quality control is this poor, then it seems likely that other problems will arrise as well. Check carefully that the battery itself is not overheating. Another possibility which also happened to me is that after installing the last upgrade to the operating system, one or more of the third party widgets became problematic, causing the same problem you describe. After removing all third party widgets, the problem stopped. Good Luck

Why ill the flash player not intialize even after disabling firewall and antivisurs software

Why will the flash player not intialize even after disabling firewall and anitvirus software?

Windows XP and internet exployer? I can get the flash player to begin the
download but stops at about 50% initalization
Greenleaf Compaction, Inc.
142 W. Main
P.O. Box 265
Hopkins, MI 49328
Phone: 1-877-552-9369
Fax: (269) 793-7298
New email address: [removed]

Why do I keep getting the windows messenger error even after disabling it?

Hi,
I am trying to download the flash player 10 on my windows XP computer. I get the error(s) close "Internet Explorer" and close "Windows messenger" during download. I closed Internet Explorer ok, but still keep getting the Windows messenger error even after stopping it and disabling it. I also have IT on medium and firewall and antivirus disabled.
How do I fix this problem. Please help. I need a flash player for work...Thanks
Nitrowizard88

ok, Here is whats listed
flash10l.oxc active x control
flashinstall, log
flashutil10l_activex.dll
flashutil10l_activex.exe
genuist.exe
kb923789.inf
install.log
I think I am running IE7
32 bit..not sure on this...

[SOLVED] Problems autostarting xbmc after nvidia upgrade

Hello!
With nvidia version 302.17-1 and with 302.17.2 xorg errors and fails when autostarting xbmc.:
Here is my Xorg.0.log: https://gist.github.com/3118969
Here is my xorg.conf:
https://gist.github.com/3118996
But downgrading nvidia and nvidia-utils to version 295.59 makes everything work again.
So is this considered as a bug or can I change my configuration to make it work with latest nvidia drivers?
My graphics card is PCI and not PCIe, maybe there is some problem with old PCI cards?
I am now using standard xbmc package in repositories (earlier I used xbmc-pvr-git but I changed to standard xbmc to see if it was a problem even without using AUR packages).
Last edited by ronnylov (2012-07-17 14:04:32)

Thanks. But I got another problem now because I can't upgrade from nvidia 295.59 to the latest version. There is some kind of dependency problem, probably because of the switch from /lib to /usr/lib.
[ronny@htpc ~]$ sudo pacman -Syu
Lösenord:
:: Synkroniserar paketdatabasen...
core är senaste versionen
extra är senaste versionen
community är senaste versionen
:: Påbörjar full systemuppgradering...
löser beroenden...
letar efter inre konflikter...
Mål (3): cairo-1.12.2-2 nvidia-302.17-2 nvidia-utils-302.17-1
Total Installationsstorlek: 54,02 MiB
Nettouppgraderingsstorlek: 0,69 MiB
Fortsätt med installation? [Y/n]
(3/3) kontrollerar paketintegritet [######################] 100%
(3/3) laddar paketfiler [######################] 100%
(3/3) kontrollerar filkonflikter [######################] 100%
fel: misslyckades att påbörja överföringen (motstridiga filer )
nvidia: /usr/lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz existerar i filsystemet
Fel uppstod, inga paket uppgraderades.
[ronny@htpc ~]$
Trying to following the info here https://wiki.archlinux.org/index.php/De … iki:usrlib:
[ronny@htpc ~]$ grep '^lib/' /var/lib/pacman/local/*/files
/var/lib/pacman/local/nvidia-295.59-1/files:lib/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/
/var/lib/pacman/local/nvidia-295.59-1/files:lib/modules/extramodules-3.4-ARCH/nvidia.ko.gz
OK the old package installed files in the wrong place when I downgraded nvidia after the update to /usr/lib.
These packages need rebuilding so as not to include the /lib directory. They can also simply be uninstalled and reinstalled again after upgrading glibc.
So I try to uninstall nvidia and nvidia-utils:
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils
Lösenord:
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: libva: behöver libgl
:: mesa: behöver libgl
:: mplayer: behöver libgl
:: xorg-xdriinfo: behöver libgl
OK then uninstall these packages as well...
[ronny@htpc ~]$ sudo pacman -Rs nvidia nvidia-utils libva mesa mplayer xorg-xdriinfo
kontrollerar beroenden...
fel: misslyckades att förbereda överföring (kunde inte tillfredställa beroenden)
:: ffmpeg: behöver libva
:: freeglut: behöver mesa
:: glew: behöver mesa
:: gnome-mplayer: behöver mplayer
:: vdpau-video: behöver libva
:: xbmc: behöver libva
:: xorg-utils: behöver xorg-xdriinfo
and I get even more dependency problems.. I am a little bit new on this but do I need to reinstall almost everything just to uninstall a video driver? I just want to replace the old driver with the new one...
I think I need a hint of how to solve my problem. Perhaps this thread belongs somewhere else in the forum?
Last edited by ronnylov (2012-07-17 11:01:31)

Firefox won't start even after disabling all plugins and reinstalling

Two days ago I updated my graphics card drivers (nvidia geforce) and it had some problems. I went into live chat support and after reinstalling some files it worked. Right after that Firefox wouldn't open, prompting me to restart or close. Hitting restart would take me the same place. It only opened in safe mode, where I deactivated the plugins related to the graphics card, and Firefox started normally.
Yesterday it didn't start again, even with those plugins deactivated. so I started in safe mode and deactivated all other plugins and it started. Today happened the same again but now I didn't have anything to deactivate so I could never start it. I unistalled and downloaded the installation file again and installed. The problem remained.
I went to the page Firefox crashes - Troubleshooting and filled in the crash report to mozilla crash reports page with the ID: 6cf4a525-9152-46f9-96f2-7ef282131023
The problem looks like it has something to do with the file mswsock.dll, but I'm affraid of deleting it.
Please help me.
Thank you,
Pedro

hello pedro, this crash is caused by the "Media Accelerator" part your nvidia graphics driver. please see if you can selectively disable it in the nvidia control panel or even uninstall it. otherwise please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, disable hardware acceleration in ''firefox > options > advanced > general''.

I have been using aurora and updated to 12.0a2 and my computer continually freezes even after disabling all plug-ins and i have even dumped stuff from the memory on my hard drive.

i continually get the same 12.0a2 update box that pops up in the bottom right corner even though i have the updated version and i have to wait for the aurora updater to do something everytime i start a new session. i went through and disabled all plug-ins and have no extensions active and this doesn't solve the problem. according to plug-in check all plug-ins are up to date. aurora does crash every once in a while where it closes out all my windows...but i do not get the crash report anymore to report it. is there a problem with aurora? i even updated FF in case that had a factor in the crashes/freezes!! FF used to do this same thing all the timea fter a new update but this is ridiculous!! WHAT IS THE PROBLEM? typos courtesy of freezing!!!is there a problem with aurora? i can't go more than 2 minutes without constant freezing and the "not responding" message. i have run scans on my computer weekly since i updated to aurora and there is no threats/problems...why does this keep happening?
addendum...i have added the crash reports for the last week...does that give any insight into why this keeps happening?

i am not sure what this means? "not for public use"? i did not seek out another version of FF it was an option on mozilla's page when i needed to update FF!! i know that i will run into these problems if i do not keep current and it was an option so i chose it. are you suggesting that i dump aurora from my system and go back to using just FF? i'm not a developer or know anything deep regarding the physical or logical of systems...i am just trying to keep good maintenance on my system!! i need a browser that works with me and not against me...chrome does not do what i need...neither does opera...FF is the only browser that i have used for almost 4 years now and i don't plan on going back to IE or changing to those mentioned above...i just want to know that when i see new offerings on mozilla products and i accept them into my system that they work much better than what i am experiencing currently!! i get that it is open-sourced and therefore a work in progress

Urgent:Calculating Burden Cost even after disabling the Burden Schedule

Hello Guys,
Can any one help me on this query,
Version 12.1.3
Business was calculating raw and burden cost before,Now we are Importing Raw Cost from Third Party System and does not want to add burden cost to these transactions.After Importing we are running PRC:Distribute and create burden transactions.It taking the burden muliplier in burden schedule and adding to the transactions.
We have end dated the effective date for burden schedule with 1-Jan-2000.But we still find that it's burdening the transactions after 1-Jan-2000.
We have not defined any burden override at Project and Task Level.
Is their any option left out to disable the burdening for a project.
Regards,
satish
Edited by: 874738 on Oct 11, 2012 9:13 PM

Hello
In first case ideally it should stop burdening but strange if it is not !!!.
Ny ways try attaching absolute burden hierarchy and runing compile burden procedure. > If not work try keeping multiplier as 0 > or try removing expenditure types in burden structure > compile > try ur luck !!!
if that nothing works then raise the SR with Oracle..
Ny ways a question in my mind...Y r u runing the PRC:Distribute and create burden transactions procedure when u dont want to burdent the transactions?
All the Best
Thanks

I'm getting "The update could not be installed" even after disabling everything & restarting - why?

It also says another instance of Firefox is running, but there isn't.
I'm using Windows 7, Firefox 5.0.
I disabled Logitech devices, SunJava & everything else, no luck. Nothing else running except Windows stuff.
This is the first time it has happened - is it a problem with Firefox?

If there are problems with updating then best is to download the full version and uninstall the currently installed version.
Download a fresh Firefox copy and save the file to the desktop.
* Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Uninstall your current Firefox version.
* Do not remove personal data when you uninstall the current version.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
If files already have been downloaded then you need to remove the files in the updates and updates\0 folder.<br />
You can delete active-update.xml and updates.xml as well if present.
C:\Users\<user>\AppData\Local\Mozilla\Firefox\Mozilla Firefox\updates
(%LOCALAPPDATA%\Mozilla\Firefox\Mozilla Firefox)

Even after disabling traacking and clearing history, how do I stop websites tracking how many visits I made?

After clearing my history and disabling tracking, when I visit certain websites, they tell me when I last visited and the date of that visit. How do I stop their tracking and build up of information on my habits?

There are 2 options of which I know:
1 - go to 'properties' and set to '''not '''allow cookies unless you ok it; there are some you'll feel safe allowing permanent access, some you won't.
2 - add Firefox NoScript plug-in - this of course won't work in other browsers, but since I prefer Firefox I find this plug-in invaluable.

Trace is still getting generated even after disabling the profile option Initialization SQL Statement - Custom

Hi All,
we have a problem with profile option "Initialization SQL Statement - Custom". we have set this at user level. after some time, we have cleared the profile option value for this user.
But we can still see the generated trace files are getting updated. we did checked this trc files from path returned from below query.
select name, value
from v$parameter
where name like 'user_dump_dest';
Please help us on how to resolve this issue. we are using Oracle Apps R 12.1.2 version.
Thanks in advance
Raghava

Before logging out we suspect that he closed the browser instead of logout link.
What if you make the user logout, can you reproduce the issue then?
We have verified the profile options for this user and found that value is cleared for profile Initialization SQL Statement - Custom.
How do you know that the files were generated for this user and because of this profile option? Have you verified profile options for all users at all level?
Thanks,
Hussein

Firefox 7 is terribly slow even after disabling plugins and complete reinstall

Since upgrading to 7.0, and 7.0.1, I have had major problems with Firefox tabs being stuck on "Connecting..." and never loading the web page. Occasionally this is accompanied by a crash. I have disabled all extensions, disabled IPv6, dnsPrefetch, removed and reinstalled the app with a new blank profile and the issue continues. I also disabled Sophos, the security suite I am currently using. I never ran into any of these issues in version 6. I am currently running the roboform plugin but I have disabled this previously in an attempt to resolve the issue.

Go to Tools > Options > Advanced > Network and click Settings under Connection. Try no proxy (or if that's what it currently is, try system default).
I'd also check again for security software. Sometimes "disable" just means it doesn't block incoming traffic but it still restricts outgoing. You may also have other security software (it may get installed with stuff like Skype or come bundled with your computer).

SPC XBAR chart showing target even after disabling

Hi All,
I am generating a SPC XBAR chart. I just need to show user specification limits. In that I unchecked show user target option. Still it is showing the user target on the applet. I even used the string <PARAM NAME="UpperShowUserTarget" VALUE="false"> within the applet. Still no change. I am using xMII 11.5. I would like to know whether this is problem with the version or not.
Thanks & Regards,
Ravi Kumar

Hi Ravi,
I do not see any way to eliminate the Target from the Legend. It appears that if your Legend background color is the same as your chart background color, the Legend entry is not seen - I realize this leaves a "hole" in the Legend. I might consider setting "Show Legend" to false and creating my own HTML legend.
Kind Regards,
Diana Hoppe

Win 7, IE 11 downloading flash installer, I get virus detected even after disabling ActiveX

Win 7 IE 11, ACTIVEX disabled, trying to download Flash installer, I get Virus detected- installer deleted. Any Ideas?

Download the Adobe Flash Player FULL installer directly by right clicking one of the following links ans selecting "Save target as".
Flash Player for ActiveX (Internet Explorer)
Flash Player Plug-in (All other browsers)
Disable the A/V and then run the installer.

[SOLVED] Daemon autostarting even after disabling it.

Similar Messages

Maybe you are looking for