[SOLVED] Default audio device no longer works after reboot

After today's reboot, the audio device no longer works. E.g., VLC says:
Audio output failed:
The audio device "default" could not be used:
No such file or directory.
This is the console log:
[0x1394138] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
Fontconfig warning: "/etc/fonts/conf.d/50-user.conf", line 9: reading configurations from ~/.fonts.conf is deprecated.
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac40fa4db8] main decoder error: failed to create audio output
[0x7fac180069c8] pulse audio output error: PulseAudio server connection failure: Connection refused
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
[0x7fac180069c8] alsa audio output error: cannot open ALSA device "default": No such file or directory
[0x7fac180069c8] jack audio output error: failed to connect to JACK server
[0x7fac180069c8] oss audio output error: cannot open audio device (/dev/dsp)
[0x7fac180069c8] main audio output error: no suitable audio output module
[0x7fac41055118] main decoder error: failed to create audio output
The strange thing is that the sound card does in fact work; e.g. the sound test for "HDA Intel PCH", the first entry in my KDE Audio Settings, works. But the entry "default" does not and I suppose that is also the device that VLC is complaining about.
I've tried blacklisting the HDMI driver and switched to the other audio output modules in VLC. I've also checked I'm still member of the "audio" group.
Edit:
P.S. Solved this myself. I had a USB-to-MIDI adapter cable plugged in during boot, which seems to have been causing these problems. I suppose systemd thought it was a USB sound card? I was wondering why dmesg said something about USB sound when the computer doesn't have any USB sound devices. Hardware detection epic fail. Although I guess the cable counts as a MIDI device at least, so in a way it's correct.
So it looks like I'll always have to unplug the MIDI cable before rebooting.
Last edited by Morn (2012-11-23 19:24:00)

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Similar Messages

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade

My Bluetooth device A2DP (life audio feed) no longer works after 5.1.1 upgrade. But phone call is still working. Tried resetting phone and repairing device. Still not working. Any suggestion?

You might get. Ore assistance in a different forum area. Maybe try Using pad. This is the forum for iPhoto for iOS.

Audio Inputs no longer work after upgrade to 10.4.10

Anyone else having trouble with audio inputs after upgrading to 10.4.10? Here's my deal:
MacPro dual 2.66, 4GB RAM, running 10.4.10 as of this morning.
Upgraded to 10.4.10 today and the mic on my Plantronics USB headset quit working. 'Phones still work. Here's what I did:
1. Tried multiple audio input devices. None work.
2. Tried all USB ports, problem persists.
3. Tried the 1/8" audio input, problem persists.
4. Zapped PRAM, problem persists.
5. Called AppleCare and they had me do an Archive and Install on the system software, which installed 10.4.7 and the problem went away. Then, at their suggestion, I let Software Update reinstall 10.4.10 and the problem came back.
6. Rebooted the system from a 2nd internal drive running 10.4.9 and the problem went away.
Seems pretty clear to me that this issue is with the OS, yet Apple's support staff insists the problem is "with the data on my boot drive". Thing is, the data on the "problem" boot drive consists of exactly the same applications on the other drives, and only those applications. There ** is no ** data on the boot drive other than the OS and some applications. Yet the other drive I can boot from that runs 10.4.9 and doesn't cause audio input issues contains all sorts of junk.
So, to reiterate, I'm booting from a clean boot drive with nothing but OS 10.4.10 and some pro applications on it and the audio input won't work. I boot from into any other Mac OS on this drive or any other and all is well. Yet this problem is supposedly with my data?
Is anyone else out there seeing issues like this?

I used a UVC-compliant USB Logitech camera (the
Fusion) driverless
under OS X 10.4.9.
FWIW, none of these devices are actually driverless. They rely on drivers either supplied separately by some company (not necessarily the vendor of the product) or bundled into the OS. Usually, the bundled drivers are based on open standards like UVC mentioned in the link. Apple writes a lot of the bundled driver code itself but some of it comes from outside sources like LSI or Intel.
An unfortunate fact of life is that open standards are not always as well defined as they ideally should be. Another is that certain companies sometimes set their own standards that aren't quite compatible with open ones, sometimes to implement real or imagined improvements on an open standard, sometimes to gain a marketing advantage.
The good news is that the market usually -- eventually -- favors the open standard. The bad news is that it often takes some time for this to happen, leaving users -- particularly Mac users, who still represent a smaller market force than those using Windows -- without a solution for an uncomfortably long period of time.
Your best or only recourse for now may be to downgrade to 10.4.9 until this gets resolved, but you should also take into account that not all users are having these problems so it may be something other than the update itself that is causing the problem. I just video chatted with a colleague using an Intel Mac mini who is having no problems whatsoever -- we are both puzzled why he is unaffected while others are.
Sorry this couldn't be of more help.

USB device no longer works after 10.6.5 patch

After installing the patch for 10.6.5 Thursday, my Belkin N52te no longer works. It has previously worked fine, and the system extension for it was able to see it, but now it says "No device connected". I have tried re-installing the driver, and 75% through the installation I get a message that the xxx.kext file was not installed correctly. I get this each time I attempt to re-install it.
This gamepad has worked flawlessly for me since purchase in spring of '09 prior to this.
Please don't tell me to update the driver, as Belkin's "latest" is Feb 09. I have contacted Belkin, and am waiting for a response.
I found a suggestion of finding the old usb.kext file from the system backup I have on a second drive, and replacing the current one with it. If anyone thinks this will work, could they give me the exact name of the file to look for?
It seems odd that Apple, after trying to get the Mac accepted as a viable gaming machine, should put out a patch that breaks one of the most widely used "speedpads" on the market. I have been an avid World of Warcraft player for close to 6 years now. The enjoyment I receive while playing WoW has been the driving reason for me to purchase 2 top of the line Mac Pro's in the past 4 years. Come on Apple, fix this, please!?
Thanks,
Dan K.

February 2009? Snow Leopard wasn't even out yet. It is lucky it has worked for a year and a half.
Come on Apple, fix this, please!?
This is a user to user board. Check the terms of use, if you don't believe me. If you want Apple to fix something, here are the links:
http://www.apple.com/feedback/
http://bugreporter.apple.com/
I found a suggestion of finding the old usb.kext file from the system backup I have on a second drive, and replacing the current one with it. If anyone thinks this will work, could they give me the exact name of the file to look for?
While this may work, that's a jalopy of a solution. It might break in the next update, not being up to date itself, and some other extension might be dependent on it. Best to downgrade until you can get assurance that it will work with 10.6.5, if this is an important feature for you. You can either recover your backup, or if not available, see this tip:
http://discussions.apple.com/thread.jspa?threadID=1308817&tstart=10

Conexant Audio Speakers No Longer Working After Unplugging Headphones - X301

Hello,
I plugged in some headphones via the jack for the first time after owning my X301 for 2 months. Ever since then, the laptop speakers stopped working!!! If I want to hear anything, I now have to listen via my headphones. The beeping I used to hear when I plug/unplug the AC adapter is gone, too. I have Vista/32 Home Premium.
Here is what I tried so far:
-Pressed the mute/unmute button on the keyboard.
-Adjusted the volume via the keyboard and from the Conexant icons in the taskbar.
-Disabled/enabled the speaker and (and the microphone too) from the Conexant menus.
-Disabled and enabled the Conexant sound hardware from the Vista Device Manager.
-Updated the Conexant Audio Drivers from 4.92.5 to 4.92.7.0 and then back to 4.92.5 (rebooted).
-Enabled and disabled the beep options within the BIOS.
I have noticed when sound is playing, the Conexant software visually indicates (via the green bar) for the speaker, but of course no sound comes from the speaker! Lenovo tech support wants me to do a recovery or send the laptop in! Help!
Message Edited by toughluck on 08-09-2009 08:42 AM

Double posting because this seems to be a solution
Ignore my last post (or switch back to CLASSIC in the 3rd tab)! Might be wrong here but I think the mother jack (the one from the laptop) has a small contact pin to tell it if a jack is plugged in or not and that can get bent or something like that and tell the system the headphones are always plugged in. I got my speakers back by repeatetly plugging in and out the headphones jack with a little angle to the action, It just came back..
Just tried the same trick on a DELL mini and it didn't work... hope it does for you
Windows 7 64bit
Thinkpad X200s | CPU 1,86Ghz | RAM 4GB | HDD Intel x25-M G2 80GB

USB audio device no longer working w/ new kernel

Hi, all--
I have a Creative SoundBlaster Live! 24 external USB audio box which I have been using for probably 3 years--with Arch Linux and without any significant trouble. Suddenly, after a full system upgrade (so that I am now running the 2.6.27-ARCH kernel), it is not working. Alsamixer doesn't detect it, and the power LED on the box is dark (it draws power through the USB connection).
So far, the only relevant info I have found is in /var/log/messages. For USB connections I primarily use an add-on USB card plugged into a PCI socket (it's an Adaptec USB 2.0 card ... I can find more specifics if needed). That card has 2 ports, and I usually have the USB audio box and an external hub plugged into it. I currently have a printer plugged into the external hub. The hub and the printer were successfully detected at the last bootup, but
Oct 18 13:13:46 $MYHOSTNAME usb 1-2: new full speed USB device using ohci_hcd and address 2
Oct 18 13:13:46 $MYHOSTNAME usb 1-2: configuration #1 chosen from 1 choice
Oct 18 13:13:46 $MYHOSTNAME snd-usb-audio: probe of 1-2:1.0 failed with error -5
[of course, the actual hostname appears in the messages where I put $MYHOSTNAME]
Anybody have an idea what might be going on?
Thanks in advance for any clues.

Check the archlinux news item which calls for an entry in kernel commandline .................

Usb devices no longer work - after itunes 8 uninstall as well.

Have uninstalled itunes 8 as outlined in various posts on internet. However, now none of my devices such as camera and printer are recognized by my computer. Hope someone has solved this problem. Thanks.

Hello, Emir,
I'd suggest you ask again in the MacBook Pro forum. This forum is intended for old, pre-PowerMac G3 hardware and so not the most likely place to get a quick and applicable response.
Regards.

[SOLVED]Keyboard and touchpad doesn't work after reboot from Arch

Excuse me, but i'm a newbie. I'm not sure if this is an arch problem, but i will just post it here.
I've beening using Arch64 and it works just fine. However, every time i reboot from arch into Windows 7 (32bit), the keyboard and touchpad will stop responding just when the Win7 splash screen shows, however the mouse works fine. Then when you shutdown the computer (from win7 now) it will take apparently longer time, and sometimes i have to press the power key 5 seconds to make it shutdown.
It seems the correct way (to reboot from arch to win7) is to shutdown down the computer first and start it again, and everything will work fine.
And rebooting from win7 to win7 or arch to arch or win7 to arch will work fine too.
I'm glad to post extra information, but I've got no clue and i'm not sure what to put here.
The laptop is a Lenovo Y450 with Intel Core Dual P7540, 4G Memory, NV GT240M. Kernel version of Arch is 3.0.6 (but the problem existed long since earlier versions) I don't have a swap partition. If you need extra information, please mention the item.
Thanks a lot!
Last edited by crlf0710 (2011-11-15 10:29:38)

Hi!
That is indeed strange. Since your external mouse works fine (which probably is connected via USB, right?) it appears that the problem lies somewhere around the internal keyboard/touchpad access. I'm not sure how this works with a Lenovo Y450, but just try to enter BIOS (in case you have not been there, you probably have to hit F1 or F2 during startup - less likely it would be delete or escape ...) and look for your keyboard/touchpad options.
You should probably find something like "... legacy support ...". This is a relic from PS/2 times and emulates your internal input devices as PS/2 devices. So - when found, just change the setting (you cannot mess anything up, and both systems will probably not even pop up a message). My guess is it is set to "enabled" and Arch somehow messes with the PS/2 emulation in your case .... so just turn it off.
good luck

Flashplayer does no longer work after reboot

Hello and much apreciated if you can look into this.
I need to install flasplayer everyday to get it working.
Which is very odd, because in the folder of sys32 macromed and syswow64 macromed all the files are there.
But for some unknown reason they dont see to work.
i tried setting permission for the OCX files in both folders but that had no effect either
If you could help me much apreciated, since reinstalling everyday can get quite annoying.
Yours sincerely,
Diamondcore

How do i know if the downloaded version op Flash player is the 32 bit?
The one i get from downloading from the website is called (install_flashplayer11x32_mssd_aih)
I assume this is the 32 bit version, however ill wait till i get confirmation
Thanks for helping me this far,

LMS 4.0 no longer working after reboot

I have LMS v4.0 installed and was it working fine (Windows Server 2008R2 Std).
However, I had call to reboot the physical server last week (it had been up for over 6 months) and I am now having problems with most options under the Inventory menu.
I have attached screenshots of the errors I am getting and the end of the DCRServer.log file which indicates that the DCR server has started ok.
I have disabled the DHCP Client service as I saw in another post that this has been known to cause the issue I am seeing, but that has not made any difference.
I have exhausted everything I can think of and am hoping that someone on here can give me some advice or ideas as to where to look next.
Thanks
Steve

Do all the 'connection refused' lines in stdout.log mean anything....
=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:37
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:38
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:39
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:40
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:41
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:42
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:43
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:44
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:45
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:46
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:47
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:48
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:49
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:50
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:51
LTGateway.run(): Could not connect to Message Queue, javax.jms.JMSException: Could not connect to broker URL: tcp://localhost:42351?wireFormat.maxInactivityDuration=0&wireFormat.maxInactivityDurationInitalDelay=30000. Reason: java.net.ConnectException: Connection refused: connect, Feb 10 11:16:52

IDT High Definition Audio CODEC has stopped working after intalling the udates.

hello sir/madam,
right now i had updated my window...after installing the updates my system audio device has stopped working..
kindly help me in solving the problem

Hi,
1. Please write your notebook product number (p/n).
Resource:
How to Locate the Notebook product number (p/n)
2. Which system are you using?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

HT2188 home button no longer working after upgrade to io6 on my iphone4...any ideas to fix this problem

home button no longer working after upgrade to ios6 software on my iphone4..anything i can do to frix this or apple send me a new device. phone no good without a home button

The button's broken. S**t happens. Apple will replace your phone. If in waranty it will be free of charge. If not, you will pay $149.
You can elect to have it repaired at a 3rd party shop near you if you choose, but this will void all warranty if there's any left.

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

Internet Explorer 9 no longer works after an uninstall of HP Support Centre

Internet Explorer 9 no longer works after an uninstall of HP Support Centre and drivers for 3 HP All-in-One printers (psc1310, C4180, F4200). Intend to re-install for just C4180. I selected option to remove for all related software, though the HP Update and Photosmart Essentials have been left. IE9 stops working when launched (even when launched with no add-ons and with Protected Mode disabled and Advanced Settings restored) and regardless of initial URL. If I remove the IE9 update then IE8 works fine. I tried re-installing IE9 update, twice, and it continues to fail.
I’m running Vista 32 Home Premium SP2 on Samsung Q210 with Norton 360 v5, SpywareBlaster and Spybot - Search & Destroy.
This question was solved.
View Solution.

I now believe the problem with IE9 was not related to HP, but to a Windows Update replacement to the “Intel Corporation - Display - Mobile Intel(R) 4 Series Express Chipset Family” drivers: Intel Corporation Display software update released in February, 2011 (useless link http://winqual.microsoft.com/support/?driverid=20411791). IE9 started working OK when I set “Use software rendering instead of GPU rendering*” (see http://forums.whirlpool.net.au/archive/1678709 with reference to “faulting module igdumdx32.dll”), so will now investigate removing that update.
Sorry to have cast aspersions on HP. MS did this to themselves, as usual.

Internet sharing no longer works after Lion 10.7.4 update

Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

so here is da answer
1. go to finder>(computer name)>macintosh HD>library>preferences
2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
3. restart mac and device which you share intenet to
then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
then, just wait for apple to release da 10.7.4 fixed
please use da steps!

[SOLVED] Default audio device no longer works after reboot

Similar Messages

Maybe you are looking for