[Solved] Dependencies loop detected (nvidia-304xx-libgl ///

Hi.
Today, with a pacman syu I got this message (translating from spanish to english)
attention: dependencies loop detected:
attention: nvidia-304xx-libgl will be installed before its dependence nvidia-304xx-utils
I don't know which are the consequences of this message and I don't want to update because I don't know if I have to do something before or after, or should not worry.
What should I do?
Thanks
Edit:
better title... I think
more info... there are more packages in updates... including mesa-10.1.0-2 (viewing other posts with conflicts involving this package, I don't know if this info is important). Thanks again.
Last edited by ppsalama (2014-03-09 17:32:08)

Thanks again... but something strange has happened to me now: (now I will put all my pacman output)
This post was because I got:
sudo pacman -Syyu
[sudo] password for ########:
:: Synchronizing package databases ...
core 106,8 KiB 367K/s 00:00 [##########################################] 100%
extra 1456,6 KiB 1003K/s 00:01 [##########################################] 100%
community 2,1 MiB 1054K/s 00:02 [##########################################] 100%
archlinuxfr 12,2 KiB 183K/s 00:00 [##########################################] 100%
:: Starting full system upgrade...
:: ¿Replace kdeutils-kwallet with extra/kdeutils-kwalletmanager? [S/n] s
solving dependencies...
attention: dependencies loop detected:
attention: nvidia-304xx-libgl will be installed before its dependence nvidia-304xx-utils
Conflict checking ...
Packages (275): calibre-1.27.0-1 cups-1.7.1-4 file-5.17-2 kactivities-4.12.3-1 kde-base-artwork-4.12.3-1
kde-l10n-es-4.12.3-1 kde-wallpapers-4.12.3-1 kdeaccessibility-jovie-4.12.3-1
.......... a lot of kde packages ...................................................................................................................
libcups-1.7.1-4 libkcddb-4.12.3-1 libkcompactdisc-4.12.3-1 libkdcraw-4.12.3-1 libkdeedu-4.12.3-1
libkdegames-4.12.3-1 libkexiv2-4.12.3-1 libkipi-4.12.3-1 libkmahjongg-4.12.3-1 libkomparediff2-4.12.3-1
libksane-4.12.3-1 libnl-3.2.24-1 linux-3.13.6-1 linux-docs-3.13.6-1 linux-headers-3.13.6-1
linux-lts-3.10.33-1 linux-lts-headers-3.10.33-1 mediastreamer-2.10.0-1 mesa-10.1.0-2 minidlna-1.1.2-1
nepomuk-core-4.12.3-1 nepomuk-widgets-4.12.3-1 nvidia-304xx-304.119-2 nvidia-304xx-libgl-304.119-2
nvidia-304xx-utils-304.119-2 oxygen-gtk2-1.4.4-1 oxygen-gtk3-1.3.4-1 oxygen-icons-4.12.3-1
pysmbc-1.0.13-2 python2-cherrypy-3.2.5-1 python2-setuptools-3.1-1 s-nail-14.6.2-1 subversion-1.8.8-1
systemd-210-3 systemd-sysvcompat-210-3 xterm-303-1
Total download size: 663,17 MiB
Total Installed Size: 1361,11 MiB
Net updating Size: -40,77 MiB
:: Continue with the installation? [Y/n] n
Then I wrote my first post.
After reading blackout23 comment, I type again sudo pacman -Syyu and I get this
:: Synchronizing package databases...
core 106,8 KiB 337K/s 00:00 [##########################################] 100%
extra 1456,1 KiB 988K/s 00:01 [##########################################] 100%
community 2,1 MiB 1046K/s 00:02 [##########################################] 100%
archlinuxfr 12,2 KiB 185K/s 00:00 [##########################################] 100%
:: Starting full system upgrade...
:: ¿Replace kdeutils-kwallet with extra/kdeutils-kwalletmanager? [S/n] s
solving dependencies...
Conflict checking ...
error: error when preparing transaction (could not satisfy dependencies)
:: cairo: needs libgl
:: freeglut: needs libgl
:: glu: needs libgl
:: java3d: needs libgl
:: libva: needs libgl
:: mesa-demos: needs libgl
:: mplayer: needs libgl
:: pipelight: needs libgl
:: qt4: needs libgl
:: xorg-xdriinfo: needs libgl
a completely different output, and I didn't anything
what happens?

Similar Messages

[SOLVED] What is the nvidia-304xx-lts?

What is the nvidia-304xx-lts driver for a card? What is it for special about the "lts" ?
Last edited by amandus (2013-03-24 07:17:15)

This particular version enjoys long-term support (LTS) from upstream(NVIDIA), including security fixes and some feature backports, especially useful for Arch users seeking for the most stable packages arround.
But you must remember that because this packages are less times updated, it may come without support for some newer cards and capabilities.
Last edited by s1ln7m4s7r (2013-03-23 13:44:42)

NV GeForce 7600, nvidia-304xx-lts, but Failed to load module "nvidia"

Hi,
I'm trying to replace nouveau driver with nvidia-304xx-lts for my NVIDIA Corporation G73 [GeForce 7600 GT] videocard.
I'm following advices at https://wiki.archlinux.org/index.php/Nvidia.
I have installed the linux kernel: core/linux-lts 3.14.21-1.
I modified the script for switching from nouveau to nvidia, like:
#!/bin/bash
# nouveau -> nvidia
# run as root
set -e
# check if root
if [[ $EUID -ne 0 ]]; then
echo "You must be root to run this script. Aborting...";
exit 1;
fi
if [ -e /etc/X11/xorg.conf.d/30-nouveau.conf ]
then rm -v /etc/X11/xorg.conf.d/30-nouveau.conf
fi
cp /Adatok/ArchLinuxBeallitasok/30-nvidia.conf /etc/X11/xorg.conf.d/
sed -i 's/MODULES="nouveau"/#MODULES="nouveau"/' /etc/mkinitcpio.conf
pacman -Rdds --noconfirm xf86-video-nouveau mesa-libgl lib32-mesa-dri lib32-mesa-libgl
pacman -S --noconfirm nvidia-304xx-lts lib32-nvidia-304xx-libgl
mkinitcpio -p linux
reboot
The 30-nvidia.conf is:
Section "Device"
Identifier "Nvidia Card"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
EndSection
When I run after reboot and bash login:
startx
I get not the X Window system, but error messages.
The /var/log/Xorg.0.log file is:
[ 229.009] (II) LoadModule: "nvidia"
[ 229.009] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 229.010] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 229.010] compiled for 4.0.2, module version = 1.0.0
[ 229.010] Module class: X.Org Video Driver
[ 229.012] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 229.012] (EE) NVIDIA: system's kernel log for additional error messages.
[ 229.012] (II) UnloadModule: "nvidia"
[ 229.012] (II) Unloading nvidia
[ 229.013] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 229.013] (EE) No drivers available.
What am I missing here? How can I solve this problem?
Regards, from Pál

I solve the problem with the script:
#!/bin/bash
# nouveau -> nvidia
# run as root
set -e
# check if root
if [[ $EUID -ne 0 ]]; then
echo "You must be root to run this script. Aborting...";
exit 1;
fi
if [ -e /etc/X11/xorg.conf.d/30-nouveau.conf ]
then rm -v /etc/X11/xorg.conf.d/30-nouveau.conf
fi
cp /Adatok/ArchLinuxBeallitasok/30-nvidia.conf /etc/X11/xorg.conf.d/
sed -i 's/MODULES="nouveau"/#MODULES="nouveau"/' /etc/mkinitcpio.conf
pacman -Rdds --noconfirm xf86-video-nouveau mesa-libgl lib32-mesa-dri lib32-mesa-libgl
pacman -S --noconfirm nvidia-304xx lib32-nvidia-304xx-libgl
mkinitcpio -p linux
reboot
The needed package was: nvidia-304xx because I'm using linux 3.17.1-1 kernel.

Nvidia-304xx Module nvidia not found

Hi,
I had a nvidia GTX 260 as primary gpu with the latest nvidia running.
Now I switched to an old GT 6600. Therefore I installed nvidia-304xx but modprobe nvidia fails.
[pheinrich@ARCH ~]$ sudo modprobe nvidia
modprobe: FATAL: Module nvidia not found.
[pheinrich@ARCH ~]$ pacman -Qs nvidia
local/lib32-libcl 1.1-1
OpenCL library and ICD loader from NVIDIA (32-bit)
local/lib32-libvdpau 0.7-2
Nvidia VDPAU library
local/lib32-nvidia-304xx-libgl 304.121-2
NVIDIA drivers libraries symlinks (32-bit)
local/lib32-nvidia-304xx-utils 304.121-2
NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia-304xx 304.121-2
OpenCL implemention for NVIDIA (32-bit)
local/libcl 1.1-3
OpenCL library and ICD loader from NVIDIA
local/libvdpau 0.7-1
Nvidia VDPAU library
local/nvidia-304xx 304.121-5
NVIDIA drivers for linux, 304xx legacy branch
local/nvidia-304xx-libgl 304.121-2
NVIDIA drivers libraries symlinks, 304xx legacy branch
local/nvidia-304xx-utils 304.121-2
NVIDIA drivers utilities and libraries, 304xx legacy branch
local/opencl-nvidia-304xx 304.121-2
OpenCL implemention for NVIDIA, 304xx legacy branch
I do not know what I have done wrong.

I found it on
https://wiki.archlinux.org/index.php/NVIDIA
For GeForce 6000/7000 series cards [NV40-NV4E, NV63-NV68], install the nvidia-304xx or nvidia-304xx-lts packages, available in the official repositories.
When I select the dropdowns on the nvidia website I get the 304.88 for that card so I think nvidia-304xx would be the right one.
I think there was something wrong during installation. If the nvidia-304xx wouldn't be compatible the nvidia module must be installed regardless.
I will try nvidia.
Edit 1
Something completly wrong here. I have installed the package nvidia now again.
[pheinrich@ARCH ~]$ sudo pacman -Qs nvidia
local/lib32-libcl 1.1-1
OpenCL library and ICD loader from NVIDIA (32-bit)
local/lib32-libvdpau 0.7-2
Nvidia VDPAU library
local/lib32-nvidia-libgl 337.25-1
NVIDIA drivers libraries symlinks (32-bit)
local/lib32-nvidia-utils 337.25-1
NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia 337.25-1
OpenCL implemention for NVIDIA (32-bit)
local/libcl 1.1-3
OpenCL library and ICD loader from NVIDIA
local/libvdpau 0.7-1
Nvidia VDPAU library
local/nvidia 337.25-3
NVIDIA drivers for linux
local/nvidia-libgl 337.25-2
NVIDIA drivers libraries symlinks
local/nvidia-utils 337.25-2
NVIDIA drivers utilities
local/opencl-nvidia 337.25-2
OpenCL implemention for NVIDIA
But "modprobe nvidia" prints
[pheinrich@ARCH ~]$ sudo modprobe nvidia
modprobe: FATAL: Module nvidia not found.
Maybe it has to do with the situation that I had installed "nvidia" before then removed it an installed nvidia-304xx ?
Last edited by _pheinrich_ (2014-06-29 13:45:52)

[Solved]Cannot startx on fresh install with xfce4 and nvidia-304xx-lts

I just installed Arch base onto my system with my Nvidia GTS 250 Graphics card, however I am unable to start a x session after installing xfce4 and nvidia-304xx-lts followed by the command nvidia-xconfig and reboot. When I try to issue startxfce4 I get an error pointing to /var/log/Xorg.0.log as follows
[ 24.856]
X.Org X Server 1.16.0
Release Date: 2014-07-16
[ 24.857] X Protocol Version 11, Revision 0
[ 24.857] Build Operating System: Linux 3.15.5-2-ARCH x86_64
[ 24.857] Current Operating System: Linux yte 3.16.2-1-ARCH #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014 x86_64
[ 24.857] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 24.857] Build Date: 31 July 2014 11:53:19AM
[ 24.857]
[ 24.857] Current version of pixman: 0.32.6
[ 24.858] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 24.858] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 24.858] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 17 21:49:53 2014
[ 24.875] (==) Using config file: "/etc/X11/xorg.conf"
[ 24.875] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 24.897] (==) ServerLayout "Layout0"
[ 24.897] (**) |-->Screen "Screen0" (0)
[ 24.897] (**) | |-->Monitor "Monitor0"
[ 24.905] (**) | |-->Device "Device0"
[ 24.905] (**) |-->Input Device "Keyboard0"
[ 24.905] (**) |-->Input Device "Mouse0"
[ 24.905] (==) Automatically adding devices
[ 24.905] (==) Automatically enabling devices
[ 24.905] (==) Automatically adding GPU devices
[ 24.914] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 24.914] Entry deleted from font path.
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 24.914] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 24.914] Entry deleted from font path.
[ 24.914] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 24.914] (==) FontPath set to:
/usr/share/fonts/misc/
[ 24.914] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 24.914] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 24.914] (WW) Disabling Keyboard0
[ 24.914] (WW) Disabling Mouse0
[ 24.914] (II) Loader magic: 0x818d80
[ 24.914] (II) Module ABI versions:
[ 24.914] X.Org ANSI C Emulation: 0.4
[ 24.914] X.Org Video Driver: 18.0
[ 24.914] X.Org XInput driver : 21.0
[ 24.914] X.Org Server Extension : 8.0
[ 24.917] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 24.918] (--) PCI:*(0:4:0:0) 10de:0615:19f1:0d76 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000dc00/128, BIOS @ 0x????????/131072
[ 24.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 24.919] (II) LoadModule: "glx"
[ 24.953] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 25.974] (II) Module glx: vendor="NVIDIA Corporation"
[ 25.974] compiled for 4.0.2, module version = 1.0.0
[ 25.974] Module class: X.Org Server Extension
[ 25.974] (II) NVIDIA GLX Module 304.123 Wed Jul 2 11:19:55 PDT 2014
[ 25.974] (II) LoadModule: "nvidia"
[ 25.974] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 26.027] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 26.027] compiled for 4.0.2, module version = 1.0.0
[ 26.027] Module class: X.Org Video Driver
[ 26.042] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 26.042] (EE) NVIDIA: system's kernel log for additional error messages.
[ 26.042] (II) UnloadModule: "nvidia"
[ 26.042] (II) Unloading nvidia
[ 26.042] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 26.042] (EE) No drivers available.
[ 26.042] (EE)
Fatal server error:
[ 26.042] (EE) no screens found(EE)
[ 26.042] (EE)
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 26.042] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 26.042] (EE)
It apears to be trying to load various modules, first of which is my propietary nvidia driver which refers to the kernel log. My dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.2-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Sat Sep 6 13:12:51 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000cff9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cffa0000-0x00000000cffadfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000cffae000-0x00000000cffdffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cffe0000-0x00000000cfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: HP-Pavilion FQ618AA-A2L a6734f/Benicia, BIOS 5.35 12/16/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 2 base 000000000 mask F00000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 120000000 mask FF0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcffa0 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
[ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
[ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[ 0.000000] [mem 0x12fe00000-0x12fffffff] page 2M
[ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[ 0.000000] [mem 0x12c000000-0x12fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x12bffffff]
[ 0.000000] [mem 0x100000000-0x12bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xcff9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xcfdfffff] page 2M
[ 0.000000] [mem 0xcfe00000-0xcff9ffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3798e000-0x37cbefff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FC440 000014 (v00 HPQOEM)
[ 0.000000] ACPI: RSDT 0x00000000CFFA0000 000044 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: FACP 0x00000000CFFA0200 000084 (v02 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: DSDT 0x00000000CFFA0440 004E91 (v01 HPQOEM SLIC-CPC 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000CFFAE000 000040
[ 0.000000] ACPI: APIC 0x00000000CFFA0390 00006C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: MCFG 0x00000000CFFA0400 00003C (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: OEMB 0x00000000CFFAE040 000072 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000CFFA52E0 000038 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: GSCI 0x00000000CFFAE0C0 002024 (v01 HPQOEM SLIC-CPC 20081216 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000CFFB00F0 000176 (v01 HPQOEM SLIC-CPC 00000001 MSFT 00000001)
[ 0.000000] ACPI: SSDT 0x00000000CFFB14B0 00082F (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12fffffff]
[ 0.000000] NODE_DATA [mem 0x12fff7000-0x12fffbfff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xcff9ffff]
[ 0.000000] node 0: [mem 0x100000000-0x12fffffff]
[ 0.000000] On node 0 totalpages: 1048381
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13247 pages used for memmap
[ 0.000000] DMA32 zone: 847776 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffa0000-0xcffadfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffae000-0xcffdffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcffe0000-0xcfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd0000000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xd0000000-0xfedfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88012fc00000 s86784 r8192 d23808 u524288
[ 0.000000] pcpu-alloc: s86784 r8192 d23808 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031977
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda5
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4046408K/4193524K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 147116K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2333.276 MHz processor
[ 0.006681] Calibrating delay loop (skipped), value calculated using timer frequency.. 4668.99 BogoMIPS (lpj=7777586)
[ 0.006685] pid_max: default: 32768 minimum: 301
[ 0.006695] ACPI: Core revision 20140424
[ 0.012534] ACPI: All ACPI Tables successfully acquired
[ 0.013368] Security Framework initialized
[ 0.013377] Yama: becoming mindful.
[ 0.013731] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.017970] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.017980] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018300] Initializing cgroup subsys memory
[ 0.018326] Initializing cgroup subsys devices
[ 0.018334] Initializing cgroup subsys freezer
[ 0.018338] Initializing cgroup subsys net_cls
[ 0.018344] Initializing cgroup subsys blkio
[ 0.018375] CPU: Physical Processor ID: 0
[ 0.018376] CPU: Processor Core ID: 0
[ 0.018379] mce: CPU supports 6 MCE banks
[ 0.018387] CPU0: Thermal monitoring enabled (TM2)
[ 0.018394] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.018487] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
[ 0.019569] ftrace: allocating 20434 entries in 80 pages
[ 0.027196] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060221] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (fam: 06, model: 17, stepping: 07)
[ 0.063333] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063333] ... version: 2
[ 0.063333] ... bit width: 40
[ 0.063333] ... generic registers: 2
[ 0.063333] ... value mask: 000000ffffffffff
[ 0.063333] ... max period: 000000007fffffff
[ 0.063333] ... fixed-purpose events: 3
[ 0.063333] ... event mask: 0000000700000003
[ 0.076742] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.083412] x86: Booting SMP configuration:
[ 0.083415] .... node #0, CPUs: #1 #2 #3
[ 0.130014] x86: Booted up 1 node, 4 CPUs
[ 0.130018] smpboot: Total of 4 processors activated (18673.96 BogoMIPS)
[ 0.133346] devtmpfs: initialized
[ 0.136924] PM: Registering ACPI NVS region [mem 0xcffae000-0xcffdffff] (204800 bytes)
[ 0.137923] pinctrl core: initialized pinctrl subsystem
[ 0.137968] RTC time: 1:49:28, date: 09/18/14
[ 0.138025] NET: Registered protocol family 16
[ 0.138158] cpuidle: using governor ladder
[ 0.138160] cpuidle: using governor menu
[ 0.138185] ACPI: bus type PCI registered
[ 0.138187] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.138268] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.138270] PCI: not using MMCONFIG
[ 0.138272] PCI: Using configuration type 1 for base access
[ 0.153430] ACPI: Added _OSI(Module Device)
[ 0.153430] ACPI: Added _OSI(Processor Device)
[ 0.153430] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.153430] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.155075] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.157331] ACPI: Dynamic OEM Table Load:
[ 0.157338] ACPI: SSDT 0xFFFF880129AB7600 0001F3 (v01 HPQOEM SLIC-CPC 00000011 INTL 20051117)
[ 0.157716] ACPI: Dynamic OEM Table Load:
[ 0.157721] ACPI: SSDT 0xFFFF880129AB7400 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158103] ACPI: Dynamic OEM Table Load:
[ 0.158109] ACPI: SSDT 0xFFFF8801295D4000 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158489] ACPI: Dynamic OEM Table Load:
[ 0.158494] ACPI: SSDT 0xFFFF8801295D4200 0001F3 (v01 HPQOEM SLIC-CPC 00000012 INTL 20051117)
[ 0.158833] ACPI: Interpreter enabled
[ 0.158843] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.158857] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.158859] ACPI: Using IOAPIC for interrupt routing
[ 0.158879] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.159657] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.160132] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.165222] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.165228] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.165233] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.165516] PCI host bridge to bus 0000:00
[ 0.165519] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.165522] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.165524] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.165526] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.165528] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 0.165530] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
[ 0.165532] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]
[ 0.165541] pci 0000:00:00.0: [8086:29c0] type 00 class 0x060000
[ 0.165640] pci 0000:00:01.0: [8086:29c1] type 01 class 0x060400
[ 0.165677] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.165716] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.165796] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.165844] pci 0000:00:1a.0: reg 0x20: [io 0xb400-0xb41f]
[ 0.165936] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.165991] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.166039] pci 0000:00:1a.1: reg 0x20: [io 0xb480-0xb49f]
[ 0.166130] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.166194] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.166216] pci 0000:00:1a.7: reg 0x10: [mem 0xf9efec00-0xf9efefff]
[ 0.166307] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.166350] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.166407] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.166427] pci 0000:00:1b.0: reg 0x10: [mem 0xf9ef8000-0xf9efbfff 64bit]
[ 0.166516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.166616] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.166706] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.166752] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.166807] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.166899] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.166945] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.167003] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.167049] pci 0000:00:1d.0: reg 0x20: [io 0xb800-0xb81f]
[ 0.167139] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.167203] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.167250] pci 0000:00:1d.1: reg 0x20: [io 0xb880-0xb89f]
[ 0.167339] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.167392] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.167439] pci 0000:00:1d.2: reg 0x20: [io 0xbc00-0xbc1f]
[ 0.167528] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.167580] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.167627] pci 0000:00:1d.3: reg 0x20: [io 0xc000-0xc01f]
[ 0.167719] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.167782] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.167804] pci 0000:00:1d.7: reg 0x10: [mem 0xf9eff800-0xf9effbff]
[ 0.167895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.167938] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.167989] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.168083] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.168135] pci 0000:00:1f.0: [8086:2916] type 00 class 0x060100
[ 0.168209] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0800-0x087f]: address conflict with ACPI CPU throttle [io 0x0810-0x0815]
[ 0.168214] pci 0000:00:1f.0: quirk: [io 0x0480-0x04bf] claimed by ICH6 GPIO
[ 0.168217] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
[ 0.168328] pci 0000:00:1f.2: [8086:2922] type 00 class 0x010601
[ 0.168351] pci 0000:00:1f.2: reg 0x10: [io 0xc880-0xc887]
[ 0.168361] pci 0000:00:1f.2: reg 0x14: [io 0xc800-0xc803]
[ 0.168371] pci 0000:00:1f.2: reg 0x18: [io 0xc480-0xc487]
[ 0.168381] pci 0000:00:1f.2: reg 0x1c: [io 0xc400-0xc403]
[ 0.168390] pci 0000:00:1f.2: reg 0x20: [io 0xc080-0xc09f]
[ 0.168400] pci 0000:00:1f.2: reg 0x24: [mem 0xf9eff000-0xf9eff7ff]
[ 0.168458] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.168549] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.168567] pci 0000:00:1f.3: reg 0x10: [mem 0xf9effc00-0xf9effcff 64bit]
[ 0.168592] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.168733] pci 0000:04:00.0: [10de:0615] type 00 class 0x030000
[ 0.168748] pci 0000:04:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 0.168761] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168774] pci 0000:04:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.168784] pci 0000:04:00.0: reg 0x24: [io 0xdc00-0xdc7f]
[ 0.168793] pci 0000:04:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 0.168906] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.168909] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.168912] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.168916] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.168982] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.169127] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.169187] pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
[ 0.169296] pci 0000:02:00.0: reg 0x18: [mem 0xfebff000-0xfebfffff 64bit]
[ 0.169354] pci 0000:02:00.0: reg 0x20: [mem 0xf8ff0000-0xf8ffffff 64bit pref]
[ 0.169397] pci 0000:02:00.0: reg 0x30: [mem 0xfebc0000-0xfebdffff pref]
[ 0.169663] pci 0000:02:00.0: supports D1 D2
[ 0.169665] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.169850] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.169855] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.169859] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.169866] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.169932] pci 0000:01:05.0: [11c1:5811] type 00 class 0x0c0010
[ 0.169949] pci 0000:01:05.0: reg 0x10: [mem 0xf9fff000-0xf9ffffff]
[ 0.170025] pci 0000:01:05.0: supports D1 D2
[ 0.170028] pci 0000:01:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.170112] pci 0000:00:1e.0: PCI bridge to [bus 01] (subtractive decode)
[ 0.170119] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.170126] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.170128] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.170131] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.170133] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.170135] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
[ 0.170137] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)
[ 0.170715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.170769] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.170823] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.170875] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.170927] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.170983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.171036] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.171088] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.171151] ACPI: Enabled 2 GPEs in block 00 to 3F
[ 0.171253] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.171253] vgaarb: loaded
[ 0.171253] vgaarb: bridge control possible 0000:04:00.0
[ 0.171253] PCI: Using ACPI for IRQ routing
[ 0.179597] PCI: pci_cache_line_size set to 64 bytes
[ 0.179658] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.179660] e820: reserve RAM buffer [mem 0xcffa0000-0xcfffffff]
[ 0.179795] NetLabel: Initializing
[ 0.179797] NetLabel: domain hash size = 128
[ 0.179798] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.179813] NetLabel: unlabeled traffic allowed by default
[ 0.179835] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.179841] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.179845] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.181019] Switched to clocksource hpet
[ 0.187008] pnp: PnP ACPI init
[ 0.187030] ACPI: bus type PNP registered
[ 0.187128] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.187133] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187213] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.187433] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 0.187436] system 00:02: [io 0x0800-0x087f] could not be reserved
[ 0.187438] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.187441] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.187444] system 00:02: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.187447] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187548] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.187551] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.187555] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187674] system 00:04: [io 0x0a00-0x0adf] has been reserved
[ 0.187678] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187756] system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.187759] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187825] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.187829] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.188006] system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.188009] system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.188012] system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.188014] system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.188017] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.188133] pnp: PnP ACPI: found 8 devices
[ 0.188135] ACPI: bus type PNP unregistered
[ 0.197465] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.197469] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.197472] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.197491] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.197494] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.197497] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.197499] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.197505] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0000000-0xf01fffff]
[ 0.197510] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197514] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.197516] pci 0000:00:01.0: PCI bridge to [bus 04]
[ 0.197519] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.197522] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.197525] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197529] pci 0000:00:1c.0: PCI bridge to [bus 03]
[ 0.197532] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.197537] pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf01fffff]
[ 0.197542] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197548] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.197551] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.197557] pci 0000:00:1c.2: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.197561] pci 0000:00:1c.2: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197568] pci 0000:00:1e.0: PCI bridge to [bus 01]
[ 0.197573] pci 0000:00:1e.0: bridge window [mem 0xf9f00000-0xf9ffffff]
[ 0.197582] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.197585] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.197587] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197589] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197591] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197593] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197596] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
[ 0.197598] pci_bus 0000:04: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.197600] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.197602] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.197604] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf01fffff]
[ 0.197607] pci_bus 0000:03: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
[ 0.197609] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.197611] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.197613] pci_bus 0000:02: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.197615] pci_bus 0000:01: resource 1 [mem 0xf9f00000-0xf9ffffff]
[ 0.197618] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.197620] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.197622] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.197624] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.197626] pci_bus 0000:01: resource 8 [mem 0xd0000000-0xdfffffff]
[ 0.197628] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xffffffff]
[ 0.197657] NET: Registered protocol family 2
[ 0.197878] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.197999] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.198159] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.198193] TCP: reno registered
[ 0.198203] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198230] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.198298] NET: Registered protocol family 1
[ 0.199202] pci 0000:04:00.0: Boot video device
[ 0.199211] PCI: CLS 32 bytes, default 64
[ 0.199266] Unpacking initramfs...
[ 0.265035] Freeing initrd memory: 3268K (ffff88003798e000 - ffff880037cbf000)
[ 0.265050] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.265053] software IO TLB [mem 0xcbfa0000-0xcffa0000] (64MB) mapped at [ffff8800cbfa0000-ffff8800cff9ffff]
[ 0.265383] Scanning for low memory corruption every 60 seconds
[ 0.265750] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.266220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.268226] zbud: loaded
[ 0.268426] VFS: Disk quotas dquot_6.5.2
[ 0.268472] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.268644] msgmni has been set to 7909
[ 0.268709] Key type big_key registered
[ 0.269063] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.269162] io scheduler noop registered
[ 0.269165] io scheduler deadline registered
[ 0.269227] io scheduler cfq registered (default)
[ 0.269402] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.269456] pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
[ 0.269523] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.269664] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[ 0.269772] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.269794] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.269839] intel_idle: does not run on family 6 model 23
[ 0.269876] GHES: HEST is not enabled!
[ 0.269980] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.270599] Linux agpgart interface v0.103
[ 0.270658] rtc_cmos 00:01: RTC can wake from S4
[ 0.270820] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.270850] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.270864] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.270984] TCP: cubic registered
[ 0.271114] NET: Registered protocol family 10
[ 0.271372] NET: Registered protocol family 17
[ 0.271821] registered taskstats version 1
[ 0.272365] Magic number: 14:261:812
[ 0.272465] rtc_cmos 00:01: setting system clock to 2014-09-18 01:49:28 UTC (1411004968)
[ 0.272539] PM: Hibernation image not present or could not be loaded.
[ 0.273767] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
[ 0.273769] Write protecting the kernel read-only data: 8192k
[ 0.276140] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
[ 0.277248] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
[ 0.284774] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.286420] systemd-udevd[59]: starting version 216
[ 0.299539] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.302475] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.302536] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.305975] ACPI: bus type USB registered
[ 0.306007] usbcore: registered new interface driver usbfs
[ 0.306020] usbcore: registered new interface driver hub
[ 0.306135] usbcore: registered new device driver usb
[ 0.306716] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.307076] ehci-pci: EHCI PCI platform driver
[ 0.307191] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.307253] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 0.307261] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.307274] ehci-pci 0000:00:1a.7: debug port 1
[ 0.311183] ehci-pci 0000:00:1a.7: cache line size of 32 is not supported
[ 0.311202] ehci-pci 0000:00:1a.7: irq 18, io mem 0xf9efec00
[ 0.315748] SCSI subsystem initialized
[ 0.317397] libata version 3.00 loaded.
[ 0.320025] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.323598] hub 1-0:1.0: USB hub found
[ 0.323608] hub 1-0:1.0: 4 ports detected
[ 0.323904] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.323911] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.323925] ehci-pci 0000:00:1d.7: debug port 1
[ 0.327815] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 0.327834] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf9eff800
[ 0.336696] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.336926] hub 2-0:1.0: USB hub found
[ 0.336936] hub 2-0:1.0: 8 ports detected
[ 0.337334] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.337345] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.337354] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 0.337394] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b400
[ 0.337866] hub 3-0:1.0: USB hub found
[ 0.337875] hub 3-0:1.0: 2 ports detected
[ 0.338094] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.338100] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.338107] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 0.338134] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b480
[ 0.338347] hub 4-0:1.0: USB hub found
[ 0.338355] hub 4-0:1.0: 2 ports detected
[ 0.338546] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.338553] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 0.338559] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 0.338578] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b800
[ 0.338786] hub 5-0:1.0: USB hub found
[ 0.338794] hub 5-0:1.0: 2 ports detected
[ 0.338981] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.338987] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 0.338993] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 0.339020] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b880
[ 0.339235] hub 6-0:1.0: USB hub found
[ 0.339244] hub 6-0:1.0: 2 ports detected
[ 0.339429] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.339435] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 0.339442] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 0.339460] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bc00
[ 0.339667] hub 7-0:1.0: USB hub found
[ 0.339675] hub 7-0:1.0: 2 ports detected
[ 0.339862] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.339870] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 0.339876] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 0.339894] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c000
[ 0.340109] hub 8-0:1.0: USB hub found
[ 0.340117] hub 8-0:1.0: 2 ports detected
[ 0.340263] ahci 0000:00:1f.2: version 3.0
[ 0.340410] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.340467] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.340515] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 0.340519] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
[ 0.366734] firewire_ohci 0000:01:05.0: added OHCI v1.0 device as card 0, 8 IR + 8 IT contexts, quirks 0x0
[ 0.374399] scsi0 : ahci
[ 0.374615] scsi1 : ahci
[ 0.374814] scsi2 : ahci
[ 0.375005] scsi3 : ahci
[ 0.375196] scsi4 : ahci
[ 0.375388] scsi5 : ahci
[ 0.375468] ata1: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff100 irq 43
[ 0.375472] ata2: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff180 irq 43
[ 0.375474] ata3: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff200 irq 43
[ 0.375477] ata4: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff280 irq 43
[ 0.375480] ata5: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff300 irq 43
[ 0.375482] ata6: SATA max UDMA/133 abar m2048@0xf9eff000 port 0xf9eff380 irq 43
[ 0.630034] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 0.693360] ata1: SATA link down (SStatus 0 SControl 300)
[ 0.754296] hub 1-2:1.0: USB hub found
[ 0.754373] hub 1-2:1.0: 7 ports detected
[ 0.866772] firewire_core 0000:01:05.0: created device fw0: GUID 001e8c0001bb0f0a, S400
[ 1.013360] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.266684] tsc: Refined TSC clocksource calibration: 2333.285 MHz
[ 1.333363] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.336819] ata3.00: ATA-8: WDC WD10EARS-00MVWB0, 50.0AB50, max UDMA/133
[ 1.336823] ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.340399] ata3.00: configured for UDMA/133
[ 1.340517] scsi 2:0:0:0: Direct-Access ATA WDC WD10EARS-00M AB50 PQ: 0 ANSI: 5
[ 1.373365] usb 2-5: new high-speed USB device number 3 using ehci-pci
[ 1.500038] usb-storage 2-5:1.0: USB Mass Storage device detected
[ 1.500227] scsi6 : usb-storage 2-5:1.0
[ 1.500322] usbcore: registered new interface driver usb-storage
[ 1.500694] usbcore: registered new interface driver uas
[ 1.660027] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.980028] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 1.980030] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.125620] usb 5-1: config 1 has an invalid descriptor of length 17, skipping remainder of the config
[ 2.125624] usb 5-1: config 1 has 1 interface, different from the descriptor's value: 4
[ 2.125628] usb 5-1: config 1 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 2
[ 2.266750] Switched to clocksource tsc
[ 2.370018] usb 4-1: new full-speed USB device number 2 using uhci_hcd
[ 2.504151] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 2.504778] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 2.505402] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 2.506038] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 2.509294] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.509340] sd 2:0:0:0: [sda] Write Protect is off
[ 2.509343] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.509363] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.515260] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 2.515889] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 2.516511] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 2.517136] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 2.569106] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 2.569597] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.571450] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.586591] usbcore: registered new interface driver usbhid
[ 2.586594] usbhid: USB HID core driver
[ 2.587316] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/0003:046D:C24A.0001/input/input2
[ 2.587394] hid-generic 0003:046D:C24A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input0
[ 2.620024] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.621301] input: Logitech Gaming Mouse G600 as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.1/0003:046D:C24A.0002/input/input3
[ 2.621413] hid-generic 0003:046D:C24A.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G600] on usb-0000:00:1a.1-1/input1
[ 2.623705] ata6.00: ATAPI: HL-DT-ST BDDVDRW GBC-H20L, 1.B8, max UDMA/100
[ 2.628682] ata6.00: configured for UDMA/100
[ 2.741224] scsi 5:0:0:0: CD-ROM HL-DT-ST BDDVDRW GBC-H20L 1.B8 PQ: 0 ANSI: 5
[ 2.796696] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[ 2.870295] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.870300] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.870508] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 2.983435] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.0/0003:046D:C318.0003/input/input4
[ 2.983518] hid-generic 0003:046D:C318.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input0
[ 2.987055] input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1d.3/usb8/8-2/8-2:1.1/0003:046D:C318.0004/input/input5
[ 2.987190] hid-generic 0003:046D:C318.0004: input,hiddev0,hidraw3: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1d.3-2/input1
[ 3.173499] usb 1-2.7: new high-speed USB device number 4 using ehci-pci
[ 3.257551] hub 1-2.7:1.0: USB hub found
[ 3.257622] hub 1-2.7:1.0: 4 ports detected
[ 3.316702] floppy0: no floppy controllers found
[ 3.830625] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 4.027733] random: nonblocking pool is initialized
[ 4.403265] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[ 4.403452] systemd[1]: Detected architecture 'x86-64'.
[ 4.434571] systemd[1]: Set hostname to <yte>.
[ 5.263934] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.264264] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.264322] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.264334] systemd[1]: Starting Remote File Systems.
[ 5.264630] systemd[1]: Reached target Remote File Systems.
[ 5.264663] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.265007] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.265025] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.265058] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.265067] systemd[1]: Starting Paths.
[ 5.265331] systemd[1]: Reached target Paths.
[ 5.265342] systemd[1]: Starting Encrypted Volumes.
[ 5.265614] systemd[1]: Reached target Encrypted Volumes.
[ 5.265625] systemd[1]: Expecting device dev-sda3.device...
[ 5.265819] systemd[1]: Expecting device dev-sda6.device...
[ 5.266013] systemd[1]: Starting Root Slice.
[ 5.275815] systemd[1]: Created slice Root Slice.
[ 5.275829] systemd[1]: Starting User and Session Slice.
[ 5.276279] systemd[1]: Created slice User and Session Slice.
[ 5.276291] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.276593] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.276604] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.276899] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.276910] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 5.277203] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.277213] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.277507] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.277518] systemd[1]: Starting LVM2 metadata daemon socket.
[ 5.277808] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.277824] systemd[1]: Starting udev Kernel Socket.
[ 5.278109] systemd[1]: Listening on udev Kernel Socket.
[ 5.278123] systemd[1]: Starting udev Control Socket.
[ 5.278410] systemd[1]: Listening on udev Control Socket.
[ 5.278424] systemd[1]: Starting Journal Socket.
[ 5.278716] systemd[1]: Listening on Journal Socket.
[ 5.278736] systemd[1]: Starting System Slice.
[ 5.279185] systemd[1]: Created slice System Slice.
[ 5.279201] systemd[1]: Starting File System Check on Root Device...
[ 5.279858] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.280411] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.371945] systemd[1]: Mounting Temporary Directory...
[ 5.379927] systemd[1]: Starting system-getty.slice.
[ 5.380442] systemd[1]: Created slice system-getty.slice.
[ 5.414498] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.477478] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.477515] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.503309] systemd[1]: Started Load Kernel Modules.
[ 5.503363] systemd[1]: Starting Apply Kernel Variables...
[ 5.504202] systemd[1]: Mounting Configuration File System...
[ 5.504898] systemd[1]: Mounted FUSE Control File System.
[ 5.504935] systemd[1]: Mounting Huge Pages File System...
[ 5.505656] systemd[1]: Mounting Debug File System...
[ 5.506353] systemd[1]: Starting Setup Virtual Console...
[ 5.507155] systemd[1]: Starting udev Coldplug all Devices...
[ 5.507863] systemd[1]: Starting Journal Service...
[ 5.508912] systemd[1]: Started Journal Service.
[ 5.600542] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ 5.836201] systemd-udevd[175]: starting version 216
[ 6.237023] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 6.237029] ACPI: Power Button [PWRB]
[ 6.237089] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.237092] ACPI: Power Button [PWRF]
[ 6.393110] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (\PMRG) (20140424/utaddress-258)
[ 6.393118] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.393146] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 6.403316] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.624551] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.697197] sound hdaudioC0D0: ALC1200: SKU not ready 0x411111f0
[ 6.697713] sound hdaudioC0D0: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 6.697715] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 6.697718] sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 6.697720] sound hdaudioC0D0: mono: mono_out=0x0
[ 6.697722] sound hdaudioC0D0: dig-out=0x11/0x1e
[ 6.697724] sound hdaudioC0D0: inputs:
[ 6.697726] sound hdaudioC0D0: Front Mic=0x19
[ 6.697729] sound hdaudioC0D0: Rear Mic=0x18
[ 6.697731] sound hdaudioC0D0: Line=0x1c
[ 6.697732] sound hdaudioC0D0: dig-in=0x1f
[ 6.702189] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 6.709310] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.717944] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input8
[ 6.718325] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 6.718367] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 6.718409] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 6.718451] input: HDA Intel Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 6.718493] input: HDA Intel Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 6.718576] input: HDA Intel Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 6.718699] input: HDA Intel Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 6.718743] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 6.728756] microcode: CPU0 sig=0x10677, pf=0x10, revision=0x705
[ 6.780564] gpio_ich: GPIO from 195 to 255 on gpio_ich
[ 6.802218] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 6.802227] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 6.802531] r8169 0000:02:00.0: irq 45 for MSI/MSI-X
[ 6.802745] r8169 0000:02:00.0 eth0: RTL8168c/8111c at 0xffffc90010736000, 00:24:8c:13:67:78, XID 1c4000c0 IRQ 45
[ 6.802748] r8169 0000:02:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 6.815163] microcode: CPU1 sig=0x10677, pf=0x10, revision=0x705
[ 6.815200] microcode: CPU2 sig=0x10677, pf=0x10, revision=0x705
[ 6.815216] microcode: CPU3 sig=0x10677, pf=0x10, revision=0x705
[ 6.815650] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.852178] iTCO_vendor_support: vendor-support=0
[ 6.951618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.951664] iTCO_wdt: Found a ICH9R TCO device (Version=2, TCOBASE=0x0860)
[ 6.952163] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.961276] systemd-udevd[183]: renamed network interface eth0 to enp2s0
[ 6.962065] mousedev: PS/2 mouse device common for all mice
[ 7.539521] Adding 4051964k swap on /dev/sda3. Priority:-1 extents:1 across:4051964k FS
[ 8.405763] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.687024] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 9.356701] floppy0: no floppy controllers found
[ 10.274611] r8169 0000:02:00.0 enp2s0: link down
[ 10.274665] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[ 11.871962] r8169 0000:02:00.0 enp2s0: link up
[ 11.871971] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
Due to the length of the above logs I looked for a option to upload them but could not find the button for this, my appologies. Would anyone be able to see where I am going wrong?
Last edited by meschael (2014-09-18 04:16:08)

The first code block contains my Xorg.0.log however I just tryed modprove nvidia and recieved FATAL: Module nvidia not found. which I discovered was solved by someone here https://bbs.archlinux.org/viewtopic.php?pid=961852 however when I tryed to do a pacman -S nvidia nvidia-utils I get a unresolved confilict with nvidia-304xx-utils which after trying to remove with pacman -Rs shows dependencies with cario, Im not sure how far back I should start removing things to solve this conflict or how to go abouts solving it
+++++++++
Update: Solved
+++++++++
I did some more looking and found I could force the uninstall of nvidia-304xx-lts with pacman -Rdds nvidia-304xx-lts and after revisiting the Nvidia page on the wiki for the dozenth time I started thinking maybe I needed nvidia-304xx oposed to the lts release as google as kindly pointed out lts is long term support and maybe my kernel was not lts and thus conflicting. This turned out to be the case, after removing the ofending lts version of the driver, replacing with the correct nvidia-304xx , another nvidia-xconfig and reboot followed by modprobe nvida and startxfce4 my wounderfull xfce is now running as I type this messsage in firefox. Thank you for you help, as you asking about the modprobe output caused the chain of events leading to the success.
Last edited by meschael (2014-09-18 04:15:30)

[Solved] Can't install Nvidia driver: Mesa-libgl conflict

I just finished installing my first GUI, KDE to be exact, on Arch Linux. Right now, I'm using the nouveau driver but I want to unlock the full power of my GTX 780 with proprietary nvidia drivers. On my last attempt at installing KDE, I went directly to installing the nvidia driver 304.24. After rebooting and seeing some text flash on screen, however, I was meant with only a black screen. I could still type, login and reboot but not much more since I couldn't see. I tried booting into the Arch Linux fallback GRUB provided for me with no prevail so I decided to just reinstall the OS. For that reason, I want to install this nvidia driver in hopes of being able to avoid another blank screen. So far, I have this:
[root@arch /]# pacman -S nvidia
resolving dependencies...
looking for inter-conflicts...
:: nvidia-libgl and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: nouveau-dri: requires mesa-libgl
I've tried looking across the forums for similar problems and even tried to uninstall mesa-libgl and all its dependencies but it just yields this:
[root@arch /]# pacman -Rns mesa-libgl
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: cairo: requires libgl
:: glu: requires libgl
:: libva: requires libgl
:: mplayer: requires libgl
:: nouveau-dri: requires mesa-libgl
:: qt4: requires libgl
:: qt5-base: requires libgl
I feel like I might need to uninstall the nouveau driver so as to be able to uninstall mesa-libgl. If I installed the nvidia driver at that point, I fear I might see the blank screen again. Thanks for your help in advance.
Last edited by Firephyz (2014-07-19 20:04:11)

Firephyz wrote:
I just finished installing my first GUI, KDE to be exact, on Arch Linux. Right now, I'm using the nouveau driver but I want to unlock the full power of my GTX 780 with proprietary nvidia drivers. On my last attempt at installing KDE, I went directly to installing the nvidia driver 304.24. After rebooting and seeing some text flash on screen, however, I was meant with only a black screen. I could still type, login and reboot but not much more since I couldn't see. I tried booting into the Arch Linux fallback GRUB provided for me with no prevail so I decided to just reinstall the OS. For that reason, I want to install this nvidia driver in hopes of being able to avoid another blank screen. So far, I have this:
[root@arch /]# pacman -S nvidia
resolving dependencies...
looking for inter-conflicts...
:: nvidia-libgl and mesa-libgl are in conflict (libgl). Remove mesa-libgl? [y/N] y
error: failed to prepare transaction (could not satisfy dependencies)
:: nouveau-dri: requires mesa-libgl
I've tried looking across the forums for similar problems and even tried to uninstall mesa-libgl and all its dependencies but it just yields this:
[root@arch /]# pacman -Rns mesa-libgl
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: cairo: requires libgl
:: glu: requires libgl
:: libva: requires libgl
:: mplayer: requires libgl
:: nouveau-dri: requires mesa-libgl
:: qt4: requires libgl
:: qt5-base: requires libgl
I feel like I might need to uninstall the nouveau driver so as to be able to uninstall mesa-libgl. If I installed the nvidia driver at that point, I fear I might see the blank screen again. Thanks for your help in advance.
You do it wrong.
sudo pacman -Rdd mesa-libgl && sudo pacman -S nvidia
After it, you can decide if you want to reinstall mesa-libgl and remove nvidia-libgl or leave nvidia-libgl and do not install mesa-libgl. I do it all the time during update.
Last edited by firekage (2014-07-19 19:48:30)

[SOLVED] nvidia geforce 6150SE + nvidia-304xx = X not shutting down

Hello!
I am installing a new arch desktop, using the latest october '13 iso...
I have a nvidia geforce 6150SE video card, so reading the wiki nvidia section I have to use nvidia-304xx...
I have installed it, made the minimal 20-nvidia.conf file, reboot... then as root startx and it shuts down between
Loaded extension DRI2
Loading extension GLX
Should I use some of the nvidia-96xx aur package drivers?
Last edited by luuuciano (2013-10-28 15:35:24)

KILL ME
I forgot to install xorg-twm xorg-xclock xterm...
Sorry
Last edited by luuuciano (2013-10-28 15:39:13)

Upgraded to nvidia-310.19, but I need nvidia-304xx

I can't seem to install the legacy drivers because of too many dependencies on nvidia and nvidia-utils. How can I get the legacy drivers installed without removing a ton of other programs? Will everything still work with the 304xx drivers?
Last edited by Axanon (2012-11-17 16:58:18)

Which specific error do you get?
Which packages require nvidia and/or nvidia-utils?
According to https://www.archlinux.org/packages/extra/x86_64/nvidia/, nothing needs nvidia.
According to https://www.archlinux.org/packages/extr … idia-utils, nvidia-utils is needed only indirectly for libgl.
Since nvidia-304xx-utils provides libgl, it should be no problem and everything should work with the legacy drivers.
Edit: too late
Last edited by rtoijala (2012-11-17 17:12:57)

[SOLVED: use wine] Steam + Nvidia 7300gt (304.64) "glGetError"

Steam installed from aur and works perfectly. I bought CS:S, but cant run.
Fatal Error: Could not find required OpenGL entry point 'glGetError'
In terminal, when steam starting:
libGL error: failed to load driver: swrast
Assertion Failed: X context is not using direct rendering (vis 0x027). Unfasten your seatbelt...
glxgears works
glxinfo
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
glxinfo | grep OpenGL
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce 7300 GT/PCIe/SSE2
OpenGL version string: 2.1.2 NVIDIA 304.64
OpenGL shading language version string: 1.20 NVIDIA via Cg compiler
pacman -Qs nvidia
local/libvdpau 0.6-1
Nvidia VDPAU library
local/nvidia-304xx 304.64-4
NVIDIA drivers for linux, 304xx legacy branch
local/nvidia-304xx-utils 304.64-2
NVIDIA drivers utilities and libraries, 304xx legacy branch
Can you help? What is missing?
Last edited by Shara (2013-02-15 20:18:08)

Got answer from steam community. It's brilliant! ^_^
http://steamcommunity.com/app/221410/di … 1360958828
It's wont work because required 3.0 opengl version.
Okay, guys. Native steam application wont work, but WINE works perfectly.
Where's my nosteam CS:S...

[SOLVED] Why do closed nvidia graphic drivers consume so much RAM?

I'm using nvidia Geforce 7600GT graphic card, and I tried to install nvidia-304xx graphic drivers. Everything went smoothly, but after my system started I saw that there is 4x times more RAM consumption when compared it to nouveau driver. See the following pics:
http://img849.imageshack.us/img849/7117/starto.png
up: nouveau || down: nvidia
http://img35.imageshack.us/img35/148/graphicq.png
left: nouveau || right: nvidia
I've been trying to solve this issue for 2 weeks, but I have no idea why my system consumes almost 400 MiB of RAM when only openbox is started. Compared to debian + full gnome -- 280MiB. Both systems are using the same nvidia driver. I tried even to borrow the kernel from debian and then install the drivers, but this doesn't help. Still apps in the graphic environment consume several times more RAM.
As you can see, having only 1GiB of RAM I can't afford to have 400MiB openbox. Try to think about opening web browser or other apps. xD
Does anyone know why this is happening and how to fix it? I saw similar thread on this forum, but I can't find it anymore, and there was exactly the same situation, or more or less.
For better insight -- data from http://www.pixelbeat.org/scripts/ps_mem.py
Nouveau:
Private + Shared = RAM used Program
76.0 KiB + 20.0 KiB = 96.0 KiB sleep
108.0 KiB + 27.0 KiB = 135.0 KiB agetty
120.0 KiB + 17.0 KiB = 137.0 KiB gpm
112.0 KiB + 26.5 KiB = 138.5 KiB gnome-pty-helper
180.0 KiB + 19.5 KiB = 199.5 KiB dhcpcd
176.0 KiB + 32.5 KiB = 208.5 KiB dbus-launch
224.0 KiB + 50.0 KiB = 274.0 KiB rtkit-daemon
288.0 KiB + 108.0 KiB = 396.0 KiB dnscrypt-proxy (2)
388.0 KiB + 42.5 KiB = 430.5 KiB hddtemp
416.0 KiB + 73.0 KiB = 489.0 KiB systemd-logind
504.0 KiB + 68.5 KiB = 572.5 KiB bluetoothd
384.0 KiB + 218.5 KiB = 602.5 KiB fancontrol
444.0 KiB + 185.5 KiB = 629.5 KiB gconf-helper
500.0 KiB + 132.5 KiB = 632.5 KiB gconfd-2
432.0 KiB + 224.0 KiB = 656.0 KiB login
448.0 KiB + 276.0 KiB = 724.0 KiB avahi-daemon (2)
656.0 KiB + 69.5 KiB = 725.5 KiB smartd
684.0 KiB + 42.5 KiB = 726.5 KiB hamachid
732.0 KiB + 110.5 KiB = 842.5 KiB ntpd
912.0 KiB + 51.5 KiB = 963.5 KiB systemd-udevd
616.0 KiB + 378.5 KiB = 994.5 KiB cups-browsed
932.0 KiB + 149.5 KiB = 1.1 MiB xscreensaver
676.0 KiB + 409.5 KiB = 1.1 MiB dbus-daemon (2)
968.0 KiB + 238.5 KiB = 1.2 MiB obex-data-server
804.0 KiB + 628.0 KiB = 1.4 MiB bash (2)
1.0 MiB + 379.0 KiB = 1.4 MiB cupsd
1.2 MiB + 494.5 KiB = 1.7 MiB devilspie
1.7 MiB + 90.5 KiB = 1.8 MiB systemd
1.3 MiB + 806.5 KiB = 2.1 MiB tint2
1.9 MiB + 628.0 KiB = 2.5 MiB slim
7.0 MiB + -3819.5 KiB = 3.2 MiB polkitd
2.6 MiB + 729.0 KiB = 3.3 MiB openbox
2.2 MiB + 1.3 MiB = 3.5 MiB avant-window-navigator
2.3 MiB + 1.3 MiB = 3.7 MiB pnmixer
3.4 MiB + 468.5 KiB = 3.8 MiB pulseaudio
4.2 MiB + 534.5 KiB = 4.7 MiB systemd-journald
3.8 MiB + 1.6 MiB = 5.5 MiB awn-applet
5.2 MiB + 2.2 MiB = 7.4 MiB conky (3)
10.0 MiB + 512.5 KiB = 10.5 MiB Xorg
8.6 MiB + 2.2 MiB = 10.8 MiB applet.py
10.0 MiB + 2.3 MiB = 12.3 MiB blueman-applet
11.4 MiB + 2.7 MiB = 14.1 MiB terminator
107.2 MiB
=================================
Nvidia:
Private + Shared = RAM used Program
108.0 KiB + 27.5 KiB = 135.5 KiB gnome-pty-helper
108.0 KiB + 28.0 KiB = 136.0 KiB agetty
128.0 KiB + 18.0 KiB = 146.0 KiB gpm
180.0 KiB + 19.5 KiB = 199.5 KiB dhcpcd
176.0 KiB + 34.5 KiB = 210.5 KiB dbus-launch
224.0 KiB + 53.0 KiB = 277.0 KiB rtkit-daemon
284.0 KiB + 109.0 KiB = 393.0 KiB dnscrypt-proxy (2)
392.0 KiB + 44.5 KiB = 436.5 KiB hddtemp
424.0 KiB + 76.0 KiB = 500.0 KiB systemd-logind
440.0 KiB + 73.5 KiB = 513.5 KiB bluetoothd
496.0 KiB + 144.5 KiB = 640.5 KiB gconfd-2
424.0 KiB + 227.0 KiB = 651.0 KiB login
448.0 KiB + 213.5 KiB = 661.5 KiB gconf-helper
680.0 KiB + 46.5 KiB = 726.5 KiB hamachid
656.0 KiB + 74.5 KiB = 730.5 KiB smartd
456.0 KiB + 281.0 KiB = 737.0 KiB avahi-daemon (2)
732.0 KiB + 116.5 KiB = 848.5 KiB ntpd
900.0 KiB + 53.5 KiB = 953.5 KiB systemd-udevd
616.0 KiB + 382.5 KiB = 998.5 KiB cups-browsed
592.0 KiB + 407.5 KiB = 999.5 KiB dbus-daemon (2)
944.0 KiB + 170.5 KiB = 1.1 MiB xscreensaver
1.0 MiB + 382.0 KiB = 1.4 MiB cupsd
852.0 KiB + 802.0 KiB = 1.6 MiB bash (2)
1.7 MiB + 94.5 KiB = 1.8 MiB systemd
1.9 MiB + 662.0 KiB = 2.6 MiB slim
2.6 MiB + 757.0 KiB = 3.3 MiB openbox
3.4 MiB + 514.5 KiB = 3.9 MiB pulseaudio
7.9 MiB + -3780.5 KiB = 4.3 MiB polkitd
7.0 MiB + 1.9 MiB = 8.9 MiB systemd-journald
22.0 MiB + 1.0 MiB = 22.9 MiB devilspie
22.0 MiB + 1.2 MiB = 23.2 MiB tint2
23.1 MiB + 1.8 MiB = 25.0 MiB avant-window-navigator
23.2 MiB + 1.9 MiB = 25.1 MiB pnmixer
24.8 MiB + 2.2 MiB = 26.9 MiB awn-applet
29.9 MiB + 3.2 MiB = 33.1 MiB applet.py
32.4 MiB + 3.8 MiB = 36.2 MiB terminator
56.4 MiB + 834.5 KiB = 57.2 MiB Xorg
67.3 MiB + 3.5 MiB = 70.8 MiB conky (3)
359.9 MiB
=================================
Last edited by morfik (2013-05-06 10:50:30)

Vorbis, you're my savior! It works.
I changed some stuff since then, but I had 90 MiB graphic environment (nouveau). Now I have 129.0 MiB (nvidia) -- it's 40 MiB more, but I can live with that. And of course, it is not 300+ MiB.
Private + Shared = RAM used Program
104.0 KiB + 26.5 KiB = 130.5 KiB gnome-pty-helper
112.0 KiB + 27.0 KiB = 139.0 KiB agetty
176.0 KiB + 19.5 KiB = 195.5 KiB dhcpcd
224.0 KiB + 54.0 KiB = 278.0 KiB rtkit-daemon
232.0 KiB + 122.0 KiB = 354.0 KiB su
288.0 KiB + 68.0 KiB = 356.0 KiB xcompmgr
260.0 KiB + 120.0 KiB = 380.0 KiB openbox-autosta
324.0 KiB + 108.0 KiB = 432.0 KiB dnscrypt-proxy (2)
412.0 KiB + 45.5 KiB = 457.5 KiB hddtemp
388.0 KiB + 80.5 KiB = 468.5 KiB dbus-launch (2)
404.0 KiB + 75.0 KiB = 479.0 KiB systemd-logind
444.0 KiB + 72.5 KiB = 516.5 KiB bluetoothd
432.0 KiB + 155.0 KiB = 587.0 KiB gconfd-2
480.0 KiB + 236.0 KiB = 716.0 KiB gconf-helper
448.0 KiB + 286.0 KiB = 734.0 KiB avahi-daemon (2)
684.0 KiB + 51.5 KiB = 735.5 KiB hamachid
680.0 KiB + 96.5 KiB = 776.5 KiB smartd
764.0 KiB + 112.0 KiB = 876.0 KiB ntpd
4.6 MiB + -3809.0 KiB = 911.0 KiB at-spi2-registryd
676.0 KiB + 267.5 KiB = 943.5 KiB at-spi-bus-launcher
908.0 KiB + 48.5 KiB = 956.5 KiB systemd-udevd
588.0 KiB + 530.0 KiB = 1.1 MiB sh (5)
1.0 MiB + 115.5 KiB = 1.1 MiB xscreensaver
752.0 KiB + 593.0 KiB = 1.3 MiB cups-browsed
944.0 KiB + 477.0 KiB = 1.4 MiB dbus-daemon (4)
1.2 MiB + 596.0 KiB = 1.7 MiB cupsd
1.3 MiB + 537.0 KiB = 1.8 MiB bash (2)
1.2 MiB + 748.0 KiB = 2.0 MiB tint2
5.5 MiB + -3391.5 KiB = 2.1 MiB lightdm (2)
1.7 MiB + 658.5 KiB = 2.3 MiB systemd (2)
3.0 MiB + 667.0 KiB = 3.7 MiB openbox
3.5 MiB + 547.0 KiB = 4.0 MiB pulseaudio
7.7 MiB + -3735.0 KiB = 4.0 MiB polkitd
2.3 MiB + 2.0 MiB = 4.3 MiB pnmixer
4.2 MiB + 1.5 MiB = 5.6 MiB systemd-journald
10.1 MiB + -1668.0 KiB = 8.5 MiB conky (4)
8.5 MiB + 1.2 MiB = 9.7 MiB spacefm
14.7 MiB + 2.2 MiB = 16.8 MiB terminator
50.0 MiB + -3719.5 KiB = 46.3 MiB Xorg
129.0 MiB
=================================
I commented out the following lines:
# --enable-gl
# --enable-egl
I couldn't compile cairo with --enable-egl , so that's why I removed it too.

500 5.4.6 Data command failed: Routing loop detected

I have recently installed OCS 10.1.2 on single box and configured email server. initially i could send email from web client to other domains. Later I made an MX entry in the named server to send and receive emails to the Oracle email server. At that moment also I could send emails to other domains from web client.
I then configured my email on outlook with smtp and pop server pointing to my hosted server. When I send emails to other domain from outlook I received and error "[550] 5.7.1 Rcpt command failed: Mail denied due to site's policy". I searched the forum and found a solution to take care of it. The message id is 1146225, where in I did the following
Enable Routing Control : active
allow message relay : true
allow message relay domain : *
flag process: -l
Recipient Rewriting Rules: $*@your host target smtp,$1@your domain target smtp,
example:
$*@mail.sinux.com.pe,$[email protected],
you should change the next value in smtp outbound
rele smtp : ip of your source mail or relay :port smtp
flag process: -l
After restarting the SMTP inbound and outbound server I didnt get the above error but after few days got a email saying message could not be delivered to other domains (though the message was delivered to my domain) and the errror says "500 5.4.6 Data command failed: Routing loop detected"
Any ideas to resolve it.
Warm regards,
Vipul

Hey adminmilou,
Please reach out to our direct support via live chat and we will be able to look into this further: http://helpx.adobe.com/contact.html (select Business Catalyst).

Redirection loop detected while opening Exchange 2007 mailboxes through Exchange 2013 OWA page

Team, in our infra Exchange 2013 CU8 & Exchange 2007 SP3 RU15 running. Exchange 2013 recently deployed but while opening exchange 2007 users mailbox through 2013 OWA getting error "Redirection loop detected". Want to update you few things :
Public DNS record created as mail.myinfra.in with x.x.x.2 IP and legacy.myinfra.in with x.x.x.3 IP.
Virtual directory modified mail.myinfra.in for 2013 & legacy.myinfra.in for 2007.
All the OWA request need to pass through public DNS only no internal DNS record for OWA.
Through ISA already rule created and tested also like https://mail.myinfra.in/owa giving me 2013 OWA page & https://legacy.myinfra.in/owa giving 2007 owa page. Only problem while opening https://mail.myinfra.in/owa with 2013 mailbox id/pwd working fine
but with 2007 mailbox id/pwd giving error "Redirection loop detected".
Appreciate if you can help quickly.

Hello
tip: check iis log on both of exch servers and check owa application haven't got "HTTP redirect" enabled.
sorry my english

3D games (Minecraft) not playing nice with Nouveau or Nvidia-304xx

New to minecraft and 3d gaming on linux, got it up and running. With the nvidia-304xx driver, I can play a few minutes then it spikes the processor and I only get 0-3 fps (before it spikes I get 60-70). I tried various in game settings, from full graphics to minimal and nearly every thing in between. Read the wiki and it stated there were some issues with the driver and to update the LWJGL or just switch to nouveau. Updated the game libraries and had the same effect, switched to nouveau and it would crash after world selection. I found an old forum were they launched the game as sudo, thought I would give it a whirl, and it does launch. I am in the video and games group, so I don't know why there would be a permissions issue. Minecraft is the only game I play on this computer and would prefer to have nouveau working. Any help would be appreciated
Last edited by bout10bucks (2013-06-02 02:34:01)

/usr/bin/minecraft:
http://pastebin.com/ssHQTSwL
options txt:
http://pastebin.com/awmMvAsw
Graphics Card:
http://en.wikipedia.org/wiki/GeForce_7_ … 950_Series
(7950 gt; though mine is only 256MB)
Minecraft log:
http://pastebin.com/HQW24k6F
System is a corei7 i920 with 6GB ram (desktop). Graphics card is the oldest thing in there but don't really play many games. Runs torchlight and psychonauts on full graphics with no issue. I did try updating to 1.5 prerelease since my original post to see if that would help (didn't). I noticed that the nvidia-304xx has an updated version in testing repo that I am going to try once I get a chance. It does seem that the higher I turn the graphics the faster it hits, so my current settings will give me about 10-15mins before dropping to 0-3 fps, full graphics gives me 30sec-2min, and every thing off gives me about 30min (but at that point all aesthetics are lost and isn't as fun to play)

Loops detected causing slowness on entire Vlan?

Hello Cisco Community! I'm hoping someone out there can confirm my diagnosis. Still a little green when it comes to this kind of thing.
Issue
Intermittent connectivity to Vlan105 from all other Vlans and slowness between hosts in Vlan105.
Discovery
STP detected a loop for a MAC among two ports of a single Oracle Database Appliance (ODA). Turns out the DBA had kicked off a clone job from the test ODA on another Vlan to the ODA in Vlan105. Doing this saturated the firewall interface for Vlan105.
Diagnosis
Obviously something is not configured correctly for the ODA configuration on Vlan105 which will be looked at and remedied. The STP loop detected should not have caused the intermittent connectivity and/or slowness within and two Vlan105, correct?
I believe we have two things going on here. The network configuration and the pure fact we saturated the interface.
Any ideas on this would be greatly appreciated. I'm if for the network team here and this is the best we could come up with among myself and system administrators involved in this.

Prod N5k2 is actually the secondary of a VPC configuration but during this issue Prod N5k1 was not in play due to a bad bootflash. The firewall and ODA servers are not necessarily plugged into the same FEXes but for this purpose I didn't think it mattered. There are no other switches in either environment to be the root bridge other than either N5k in the VPC pair. The firewall does all inter-vlan routing for the prod network.

Check/verify loop detection

when a loop is provided from a non routing device like SDH MUX to a router on POS port, "(LOOPED)" the word is shown from "show controller" command in SONET/POS port. ...... But same can not be found on ethernet/Gethernet port .... so we are unable to find whether loop is actually worked....... is any command or mechanism for that .... my router is cisco ASR9000; IOS-XR .

if I could add a few things to that. looped circuits are more common in sdh like environments such as POS and the like. Ethernet itself doesnt have a loop detection methodology, so we need a L2 or L3 based protocol to help us identify that loop.
POS running HDLC or PPP can easily detect this condition at L2. SDH itself has also loop capabilities in the Sonet overhead section or actually path trace element.
Ethernet doesn't have such POH or SOH and its L2 protocol doesnt naturally have a capability to detect loops. So for ethernet your easiest way to go about it is as Mark suggests to use CDP. OAM requires a bit of configuration and understanding, hence CDP is the easiest to use.
Here is an example how to see a loop:
CPE#show cdp neigh
A9K-BNG Gig 6/0 121 R ASR9K Ser Gig 0/0/0/0
CPE Gig 6/0 164 R 7206VXR Gig 6/0
in this case you see 2 neighbors, myself and the remote device. What this indicates that the cable is not really looped, but there is a loopback line configured on the peer.
loopback line basically consumes packets and loops them, and still injects packets also.
hence you see the remote neighbor and yourself on this device.
So with CDP you can identify the loop and also the type of loop that is happening.
I was also thinking that ARP can be used for that with duplicate address checking, but I see that this is not reliable. Eventhough when configuring an address we can see our own grat arp being returned, ARP or IP does not generate a dupe addr alert on it because we see the grat arp request from ourselves and not an arp response obviously.
So easiest is to use CDP for this.
regards
xander

[Solved] Dependencies loop detected (nvidia-304xx-libgl ///

Similar Messages

Maybe you are looking for