[SOLVED] desktop effects and compiz

Hello all,
Recently rebuilt my system with Arch 32, had 64 on it and mucked it up.  Everything appears to be running smoothly, at least as can be.  I do have a few questions regarding compiz and other desktop effects.
Whenever I run compiz, it will eventually crash, stripping all borders off windows and I cannot do anything, cannot click anywhere, though I can navigate any open apps on my desktop, just cant bring down menus or such.  the only way to fix is a reboot, and a good thing I have been keeping terminal up.
Which brings me to my second question, I have my terminal set to a transparent background, however, the background in terminal is only semi/quasi transparent, meaning my desktop shows through the window, which is great, but when I move the terminal windows over another window, Firefox or Chromium for that matter, the browser doesn't show through terminal but instead my desktop still shows through the terminal.  My ubuntu system at work works as expected, meaning when I drag my terminal over other windows, the windows show through the terminal not my desktop.  Is there a setting in Arch that I'm missing, or do you know if Ubuntu does some other smoke and mirrors trick?
I have an nVidia 9800GT video card and I installed the drivers, X, and Compiz per the wiki's instructions.
any help would be appreciated, would like to get compiz running smoothly without crashes, which is possible since my ubuntu system has never had compiz crash *knock on wood*.
--nixIT
Last edited by nixIT (2010-11-10 20:20:21)

nixIT wrote:Which brings me to my second question, I have my terminal set to a transparent background, however, the background in terminal is only semi/quasi transparent, meaning my desktop shows through the window, which is great, but when I move the terminal windows over another window, Firefox or Chromium for that matter, the browser doesn't show through terminal but instead my desktop still shows through the terminal.  My ubuntu system at work works as expected, meaning when I drag my terminal over other windows, the windows show through the terminal not my desktop.  Is there a setting in Arch that I'm missing, or do you know if Ubuntu does some other smoke and mirrors trick?
It sounds like your terminal is using fake transparency i.e. reproducing the desktop background while true transparency is using ARGB visuals (and needs a compositor WM).
If you want your terminal to be truly transparent and it doesn't provide an ARGB visuals option, you need to set a custom matching rule in compiz.

Similar Messages

  • Poor performance when using kde desktop effect

    Hey,
    I'm having trouble when using kde effet (system settings -> desktop -> desktop effects).
    I have a dual core E5200 3 ghz, 2 GB memory pc8500 and an HD4850 using fglrx driver, but I got incredible bad performance when using desktop effect and watching video, I can barely watch a 800x600 video in full screen mode without having bad performance, X getting up to 40% cpu usage.
    Its really like my graphic card isnt handling the rendering stuff but 3D acceleration is working, I can play 3D game without problem so far (as long as the deskstop effect arent enabled cause the cpu have like a hard time handling both for recent game)
    So I guess its some trouble with 2D acceleration or something like that, I read that some people had such issue, but I didnt figure a way to fix it.
    Here is my xorg.conf, in case something is wrong with it :
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "aticonfig-Screen[0]-0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    Load "dri2"
    Load "extmod"
    Load "dbe"
    Load "record"
    Load "glx"
    Load "dri"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Monitor"
    Identifier "aticonfig-Monitor[0]-0"
    Option "VendorName" "ATI Proprietary Driver"
    Option "ModelName" "Generic Autodetecting Monitor"
    Option "DPMS" "true"
    EndSection
    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "vesa"
    VendorName "ATI Technologies Inc"
    BoardName "RV770 [Radeon HD 4850]"
    BusID "PCI:8:0:0"
    EndSection
    Section "Device"
    Identifier "aticonfig-Device[0]-0"
    Driver "fglrx"
    BusID "PCI:8:0:0"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    Depth 1
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Screen"
    Identifier "aticonfig-Screen[0]-0"
    Device "aticonfig-Device[0]-0"
    Monitor "aticonfig-Monitor[0]-0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Thank you for any help.

    Section "Device"
    ### Available Driver options are:-
    ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
    ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
    ### [arg]: arg optional
    #Option "ShadowFB" # [<bool>]
    #Option "DefaultRefresh" # [<bool>]
    #Option "ModeSetClearScreen" # [<bool>]
    Identifier "Card0"
    Driver "vesa"
    VendorName "ATI Technologies Inc"
    BoardName "RV770 [Radeon HD 4850]"
    BusID "PCI:8:0:0"
    EndSection
    and
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    I see no reason for those to be there.
    make a backup of your xorg.conf and remove / comment those lines.

  • Slow desktop effects: Nvidia, Firefox and Thunderbird

    This has been bugging me for years and after lots of search I couldn't find a solution.  When compositing is enabled either using Compiz or Gnome Shell or even XFWM, desktop effects become slow and choppy when Firefox or Thunderbird are the active windows.  This is true also when there's another window is active on top of a visible FF or TB.  However the problem happens only when either FF or TB is maximised --no problem when they are not maximised.  By “desktop effects” I mean Compiz effects like switching to another workspace using the "desktop wall" or the "Scale addon" or going to "overview" mode in Gnome Shell.
    Right now I'm using the proprietary driver version 295.49 running on a 64bit 3.3.6 kernel on a Thinkpad T61.  The problem persists across XFCE+Compiz (my current DE), Gnome Shell  and KDE sessions.
    I'd really appreciate any hint/tip on how to solve this.  TIA,
    Bahman
    PS:  My card is a "Quadro NVS 140m" and I've set the PowerMizer to always run at "Prefer Maximum Performance" mode.
    Last edited by bahman (2012-05-17 06:38:08)

    Have the same problem. I am amazed at how little help there is for a problem that is so prodigeous as this topic is.

  • [Solved] KDE Desktop Effects no longer working

    Hello,
    I just did an update, (I didn't think it was a major one, I don't recall seeing graphics update, though I'm not sure how to confirm - is there a way to see recently updated packages in yaourt?) and after a brief issue with powertop that was solved by a restart (https://bbs.archlinux.org/viewtopic.php?id=179789 - it may be unrelated though) I found that when I restarted, KWin Crashed, and since then, my desktop effects are not working.
    I have gone to the KDE Desktop Effects Settings Menu, and under the advanced menu, set the compositing type back to OpenGL 3.1, clicked apply, and confirmed that I wanted to try it even though it had evidently crashed Kwin. I then received a message stating "21 desktop effects could not be loaded". When I clicked details, a popup window said:
    "For technical reasons it is not possible to determine all possible error causes.
    Desktop effect system is not running."
    For the record, I am on a Thinkpad X201 with intel graphics.
    Any ideas?
    Last edited by TheGuyWithTheFace (2014-04-19 07:35:43)

    Some Extra information:
    I just tried a restart, that didn't work.
    I then went back into effect settings, and saw that "enable effects at startup" was not checked. I also saw that under the advanced settings, Qt Graphics system was set to raster. Since I'm not sure which it was supposed to be on originally, but the current configuration wasn't working, I also set that to Native, and then clicked apply. KWin then crashed, here is the output:
    Application: KWin (kwin), signal: Aborted
    Using host libthread_db library "/usr/lib/libthread_db.so.1".
    To enable execution of this file add
    add-auto-load-safe-path /usr/lib/libstdc++.so.6.0.19-gdb.py
    line to your configuration file "/home/perry/.gdbinit".
    To completely disable this security protection add
    set auto-load safe-path /
    line to your configuration file "/home/perry/.gdbinit".
    For more information about this security protection see the
    "Auto-loading safe path" section in the GDB manual. E.g., run from the shell:
    info "(gdb)Auto-loading safe path"
    [Current thread is 1 (Thread 0x7fafaa788800 (LWP 796))]
    Thread 4 (Thread 0x7faf8beb3700 (LWP 797)):
    #0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
    #1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 3 (Thread 0x7faf8b27a700 (LWP 798)):
    #0 0x00007fafa3f7e3f8 in pthread_cond_timedwait@@GLIBC_2.3.2 () from /usr/lib/libpthread.so.0
    #1 0x00007fafa420a034 in QWaitCondition::wait(QMutex*, unsigned long) () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa41fd745 in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #4 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #5 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 2 (Thread 0x7faf8a878700 (LWP 799)):
    #0 0x00007fafa9fa2fd3 in select () from /usr/lib/libc.so.6
    #1 0x00007fafa42e6c13 in ?? () from /usr/lib/libQtCore.so.4
    #2 0x00007fafa4209b7f in ?? () from /usr/lib/libQtCore.so.4
    #3 0x00007fafa3f7a0a2 in start_thread () from /usr/lib/libpthread.so.0
    #4 0x00007fafa9fa9d1d in clone () from /usr/lib/libc.so.6
    Thread 1 (Thread 0x7fafaa788800 (LWP 796)):
    [KCrash Handler]
    #5 0x00007fafa9ef9389 in raise () from /usr/lib/libc.so.6
    #6 0x00007fafa9efa788 in abort () from /usr/lib/libc.so.6
    #7 0x00007fafa9ef24a6 in __assert_fail_base () from /usr/lib/libc.so.6
    #8 0x00007fafa9ef2552 in __assert_fail () from /usr/lib/libc.so.6
    #9 0x00007fafa7d6f8d9 in ?? () from /usr/lib/libX11.so.6
    #10 0x00007fafa7d6f96e in ?? () from /usr/lib/libX11.so.6
    #11 0x00007fafa7d6fc4d in _XEventsQueued () from /usr/lib/libX11.so.6
    #12 0x00007fafa7d72905 in _XGetRequest () from /usr/lib/libX11.so.6
    #13 0x00007fafa4dfe587 in ?? () from /usr/lib/libGL.so.1
    #14 0x00007fafa4dfbf6b in ?? () from /usr/lib/libGL.so.1
    #15 0x00007faf89bef6db in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #16 0x00007faf89befa33 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #17 0x00007faf89befb8b in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #18 0x00007faf89b89ef6 in ?? () from /usr/lib/xorg/modules/dri/i965_dri.so
    #19 0x00007fafa4dfd898 in ?? () from /usr/lib/libGL.so.1
    #20 0x00007fafa4dd804c in glXMakeCurrentReadSGI () from /usr/lib/libGL.so.1
    #21 0x00007fafaa34e479 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #22 0x00007fafaa350029 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #23 0x00007fafaa34aefc in ?? () from /usr/lib/libkdeinit4_kwin.so
    #24 0x00007fafaa32f4b5 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #25 0x00007fafaa2b6c75 in ?? () from /usr/lib/libkdeinit4_kwin.so
    #26 0x00007fafa431d6ea in QMetaObject::activate(QObject*, QMetaObject const*, int, void**) () from /usr/lib/libQtCore.so.4
    #27 0x00007fafa41fa958 in QFutureWatcherBase::event(QEvent*) () from /usr/lib/libQtCore.so.4
    #28 0x00007fafa3491f0c in QApplicationPrivate::notify_helper(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
    #29 0x00007fafa34984d0 in QApplication::notify(QObject*, QEvent*) () from /usr/lib/libQtGui.so.4
    #30 0x00007fafa8bfa88a in KApplication::notify(QObject*, QEvent*) () from /usr/lib/libkdeui.so.5
    #31 0x00007fafa4309a6d in QCoreApplication::notifyInternal(QObject*, QEvent*) () from /usr/lib/libQtCore.so.4
    #32 0x00007fafa430caad in QCoreApplicationPrivate::sendPostedEvents(QObject*, int, QThreadData*) () from /usr/lib/libQtCore.so.4
    #33 0x00007fafa352f71c in ?? () from /usr/lib/libQtGui.so.4
    #34 0x00007fafa43086cf in QEventLoop::processEvents(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
    #35 0x00007fafa43089c5 in QEventLoop::exec(QFlags<QEventLoop::ProcessEventsFlag>) () from /usr/lib/libQtCore.so.4
    #36 0x00007fafa430dae9 in QCoreApplication::exec() () from /usr/lib/libQtCore.so.4
    #37 0x00007fafaa2e7896 in kdemain () from /usr/lib/libkdeinit4_kwin.so
    #38 0x00007fafa9ee5b05 in __libc_start_main () from /usr/lib/libc.so.6
    #39 0x00000000004006fe in _start ()

  • [SOLVED] Just installed KDE 4.6, desktop effects don't work.

    When I try to enable KDE's desktop effects the screen goes haywire and everything is black with nasty distorted lines. Then everything returns after a little while and KDE shows a popup notification saying that "desktop effects were too slow and have been suspended...".
    I'm pretty sure my xorg.conf is configured perfectly, I've read everything there is to know about that. I was previously on Gnome with Compiz working flawlessly, so I have a feeling its not a video problem. There's always a small chance I could be wrong though.
    Could it be a video driver problem? If so, what should I do about that?
    Any idea what might be wrong?
    Last edited by amadar (2011-04-24 23:25:03)

    I'm using xf86-video-ati with my ATI card.
    I initially tried Gnome, but for some reason, gnome-shell just wouldn't start, so that why I ended up trying KDE. Once in KDE, i had this described problem.I couldn't fix it, and it was crashing (100% CPU usage sometimes), so I switched back to Gnome 3 to attempt to get the shell running. Finally, I figured out that you must not add "nomodeset" to the kernel boot line in order for gnome-shell to work, so I removed that from the end of my line and gnome-shell worked!
    It might be possible that this is the solution for the KDE graphic problem as well... I'm testing it right now, i'll be back to post it after the restart...
    Last edited by amadar (2011-04-24 23:03:03)

  • Compiz/desktop effects using open source radeonhd drivers?

    Just wanted to know if it was possible to get compiz/desktop effects working with the radeonhd driver, or whether I need to use the proprietary catalyst driver.  I'm currently running KDE 4.3 on a Mobility HD 2600.  No configuration of xorg.conf seems to allow desktop effects to be enabled (I've read all of the ATI/Xorg wiki documentation).
    Thanks in advance, again.

    Put this in your xorg.conf:
    Section "Device"
    Identifier "My Graphics Card"
    Driver "radeon"
    Option "DRI" "on" ## Eάν επιμένει να μην ενεργοποιείται το DRI, το βάζουμε επίτηδες.
    Option "DynamicClocks" "on" ## Powersaving option
    Option "AccelMethod" "EXA" ## Ενεργοποίηση του EXA rendering, για γρήγορο 2D acceleration
    Option "EXAVSync" "on" ## Flicker-free Xv overlay accelerated Video.
    Option "DMAForXv" "on" ## Εάν δεν ενεργοποείται το Xv, video acceleration, το βάζουμε επίτηδες.
    Option "ScalerWidth" "2048" ## Καλό είναι να μπει για να μην υπάρχουν artifacts σε HD video.
    Option "EnablePageFlip" "on" ## Special option για 3D δεν είναι απαραίτητη. Δείτε στο man του radeon.
    Option "RenderAccel" "on" ## Ενεργοποιεί το acceleration για την κάρτα γραφικών εάν δεν ξεκινάει.
    Option "AccelDFS" "on" ## Ενεργοποιείστε ΜΟΝΟ εάν έχετε ενεργοποιήσει το EXA option.
    #BusID "PCI:1:0:0"
    EndSection
    Then, open a terminal and enter:
    su -
    touch /etc/hal/fdi/policy/10-keymap.fdi
    nano /etc/hal/fdi/policy/10-keymap.fdi
    And put this:
    <?xml version="1.0" encoding="ISO-8859-1"?> <!-- -*- SGML -*- -->
    <deviceinfo version="0.2">
    <device>
    <match key="info.capabilities" contains="input.keymap">
    <append key="info.callouts.add" type="strlist">hal-setup-keymap</append>
    </match>
    <match key="info.capabilities" contains="input.keys">
    <merge key="input.xkb.rules" type="string">base</merge>
    <!-- If we're using Linux, we use evdev by default (falling back to
    keyboard otherwise). -->
    <merge key="input.xkb.model" type="string">keyboard</merge>
    <match key="/org/freedesktop/Hal/devices/computer:system.kernel.name"
    string="Linux">
    <merge key="input.xkb.model" type="string">evdev</merge>
    </match>
    <merge key="input.xkb.layout" type="string">us,gr</merge>
    <merge key="input.xkb.model" type="string">pc105</merge>
    </match>
    </device>
    </deviceinfo>
    See the "      <merge key="input.xkb.layout" type="string">us,gr</merge>" line, and change "us,gr" it with your languages, e.g. "us,fr".
    Then save the file.
    If you, also, have a touchpad, you should do this:
    touch /etc/hal/fdi/policy/11-x11-synaptics.fdi
    And put there:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <deviceinfo version="0.2">
    <device>
    <match key="info.capabilities" contains="input.touchpad">
    <match key="info.product" contains="Synaptics TouchPad">
    <merge key="input.x11_driver" type="string">synaptics</merge>
    <merge key="input.x11_options.MinSpeed" type="string">0.09</merge>
    <merge key="input.x11_options.MaxSpeed" type="string">0.18</merge>
    <merge key="input.x11_options.Emulate3Buttons" type="string">true</merge>
    <merge key="input.x11_options.SHMConfig" type="string">true</merge>
    <merge key="input.x11_options.AccelFactor" type="string">0.032</merge>
    <merge key="input.x11_options.LeftEdge" type="string">1700</merge>
    <merge key="input.x11_options.RightEdge" type="string">5300</merge>
    <merge key="input.x11_options.TopEdge" type="string">1700</merge>
    <merge key="input.x11_options.BottomEdge" type="string">4200</merge>
    <merge key="input.x11_options.FingerLow" type="string">25</merge>
    <merge key="input.x11_options.FingerHigh" type="string">30</merge>
    <merge key="input.x11_options.MaxTapTime" type="string">180</merge>
    <merge key="input.x11_options.MaxTapMove" type="string">220</merge>
    <merge key="input.x11_options.HorizEdgeScroll" type="string">true</merge>
    <merge key="input.x11_options.HorizScrollDelta" type="string">100</merge>
    <merge key="input.x11_options.VertEdgeScroll" type="string">true</merge>
    <merge key="input.x11_options.VertScrollDelta" type="string">100</merge>
    <!-- Restore old synaptics driver defaults removed by Fedora/RH patch -->
    <merge key="input.x11_options.RTCornerButton" type="string">2</merge>
    <merge key="input.x11_options.RBCornerButton" type="string">3</merge>
    <merge key="input.x11_options.TapButton1" type="string">1</merge>
    <merge key="input.x11_options.TapButton2" type="string">2</merge>
    <merge key="input.x11_options.TapButton3" type="string">3</merge>
    <!-- Arbitrary options can be passed to the driver using
    the input.x11_options property since xorg-server-1.5. -->
    <!-- EXAMPLE:
    <merge key="input.x11_options.LeftEdge" type="string">120</merge>
    -->
    </match>
    <match key="info.product" contains="AlpsPS/2 ALPS">
    <merge key="input.x11_driver" type="string">synaptics</merge>
    </match>
    <match key="info.product" contains="appletouch">
    <merge key="input.x11_driver" type="string">synaptics</merge>
    </match>
    <match key="info.product" contains="bcm5974">
    <merge key="input.x11_driver" type="string">synaptics</merge>
    </match>
    </match>
    </device>
    </deviceinfo>
    For this you must have installed:
    - Xserver 1.5
    - xf86-input-evdev
    - xf86-input-synaptics
    - halxorg-input-drivers
    This guide is written by Flamelab.
    Last edited by apollokk (2009-09-02 09:23:11)

  • [Solved]Kwin doesn't restore Suspend desktop effects for full screen

    Hi! I am using latest Kwin with Plasma 5 on my Arch and I have noticed that I have to check "Suspend desktop effects for full screen windows" in Desktop Effects>Advanced every time I log in.
    What's wrong with Kwin?
    Solved: Kwin 5.2 is under development now so currently this functionality is not availible.
    Last edited by artem.jackson (2015-02-19 00:41:43)

    It saves the state for my NVIDIA blob but does not for Intel laptop. It also warns that not every setup is able to redirect, so maybe he thinks our cards are unsupported and unchecks it?

  • [SOLVED] [KDE4.1] Mucho cpu use with desktop effects enabled

    With KDE4.1rc1+ desktop effects enabled, I'm consistently getting figures of 40-60 percent CPU usage, even when I'm not moving anything around the desktop.
    With desktop effects disabled, CPU use is negligible.
    This is on a Thinkpad T61p with a T9300 2.5GHz C2D processor, 4Gb RAM, nvidia Quadro FX 570M graphics, running Arch64.
    Is this normal?
    Last edited by dhave (2008-08-04 09:31:24)

    Following a suggestion by Pierre, I disabled vsync, which helped dramatically. CPU usage -- with desktop effects enabled -- has dropped from 40-60 percent to < 10 percent, usually around 2-3 percent.
    Vsync can be toggled under System Settings / Desktop Effects / General / Advanced Options. I tried all kinds of other xorg.conf tweaks and nvidia-settings options, but this is the one that really helped (the others, I'm not sure about).
    Several other users have reported the same thing.
    I'm tagging this "solved".
    Last edited by dhave (2008-08-04 09:31:06)

  • [Solved - KDE 4.6] No desktop effects, but still have 3D render

    I have an nvidia graphics card, with the nvidia binary driver installed, and everything worked smoothly, until I updated to Kde4.6 just now. After a few seconds where everything looked normal (desktop effects enabled just as before), the screen went beserk, and a popup informed me that the desktop effects were too slow, and thus have been deactivated. Without those effects, everything works fine. If I try to re-enable them in System Settings, it now tells it can't, it will revert to previous configuration, and should try to see what's wrong with my Xorg settings. I don't think there's anything wrong with them, but still, here is what I think is the relevant part:
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 9500 GT"
    Option "RenderAccel" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "1"
    Option "TwinViewXineramaInfoOrder" "DFP-0"
    #Option "metamodes" "CRT: nvidia-auto-select +1280+0, DFP: nvidia-auto-select +0+0"
    Option "MetaModes" "DFP: 1280x1024 +0+0,CRT: 1280x1024 +1280+0;DFP: 1280x1024,CRT: NULL;DFP: NULL,CRT: 1280x1024"
    SubSection "Display"
    Depth 24
    EndSubSection
    Help, ideas, anyone?
    Thanks in advance.
    EDIT: I restarted X, and then was able to enable desktop effects again, and so I did. And I just discovered how to trigger the "beserkness": just press Alt-Tab repeatedly. I will show a transparent preview of the window, and then all of a sudden, it freezes for a moment, then comes back, but way way slow...
    Last edited by gauthma (2011-01-29 00:07:59)

    I've been able to narrow it down even further: it appears that the crash happens when the effect for window switching is box switch. I changed it to Cover Switch, and everything is working properly. I haven't tried any others, for obvious reasons, but should anyone else have the same problem, here's a hint to a possible solution. Anyway, I'm closing this, and probably submit a bug to the KDE folks...

  • XBMC/mplayer and KDE Desktop effects

    Hi,
    i have setup a arch based HTPC with XBMC on top of KDE, but there is one thing i were not able to resolve: The XBMC GUI and playing a video on it gets laggy as soon as i DISABLE the kde desktop effects. My system is i3/sandy bridge based with integrated intel graphics, vaapi installed.
    1. tried different playback settings within XBMC, same results
    2. as soon as i disable the kde desktop effects, xbmc becomes slow and laggy, even if i dont restart it, if i enable desktop effects its smooth again
    3. mplayer reacts the same way when used with -vo gl or -vo gl2, so it could be somehow opengl related. With -vo xv it runs smooth in both configurations.
    4. Cpu load is constantly <20%
    5. tried as root user, same results
    6. glxinfo reports direct rendering is enabled
    so any ideas how to resolve that problem? or how to find out whats going on?
    you may ask why i want to disable desktop effects, well with desktop effects on, videos run almost perfect, but sometimes there are smaller lags that, i guess, can be related to the desktop effects eating resources, so i want to try without them.
    here is the custom part of my xorg config, tearfree was needet to get a vsync-enabled video playback:
    #20-intel.conf
    Section "Device"
    Identifier "Intel Graphics"
    Driver "intel"
    Option "AccelMethod" "sna"
    Option "TearFree" "true"
    #Option "AccelMethod" "uxa"
    #Option "AccelMethod" "xaa"
    EndSection
    Section "dri"
    Mode 0666
    EndSection

    kichawa wrote:@ChemBro root access? Where is more info about that ?
    http://nvidia.custhelp.com/app/answers/detail/a_id/3109
    Security vulnerability CVE-2012-0946 in the NVIDIA UNIX driver was disclosed to NVIDIA on March 20th, 2012. The vulnerability makes it possible for an attacker who has read and write access to the GPU device nodes to reconfigure GPUs to gain access to arbitrary system memory. NVIDIA is not aware of any reports of this vulnerability, outside of the disclosure which was made privately to NVIDIA.

  • [SOLVED] KDE, Certain Desktop Effects require OpenGL but can't set it

    Certain desktop effects give me an error when enabled (or rather when I try to enable them) saying that they require OpenGL.
    I changed the Compositing type to OpenGL and the Qt graphics system to Raster (also tried with the default Native), and I get an error saying that it Failed to activate desktop effects given configuration options.
    How can I enable OpenGL and get it all working properly?
    Last edited by harsha (2012-08-09 19:02:50)

    What's you graphics card and drivers? You can have working openGL but your card can be to old to support all the extension required by particular effect. Other effects are working ok and just couple of them are giving error, right? If so it's ok.
    Also paste output of glxinfo | grep -i render
    Last edited by masteryod (2012-08-09 18:59:43)

  • HT1349 hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

    hi ,i just got a Parallels desktop 7 and i try to install it but the cd doesn't start when its inserted.how can i solve this? the macbook pro i just got it few days back so its the last version..thx

    Hi,just now i open it with finder and it started downloading!!!
      Thank you,very new to mac:)

  • I licensed the on-year membership for After Effect, everything all right, logged in, download content (after effect) with desktop apps, and open it, than Trail period is stop, and i need to write the serial number?! What can i do?

    I licensed the on-year membership for After Effect, everything all right, logged in, download content (after effect) with desktop apps, and open it, than Trail period is stop, and i need to write the serial number?! What can i do?

    Ask for serial number http://forums.adobe.com/thread/1234635 has a FAQ link
    or
    Online Chat Now button near the bottom for Activation and Deactivation problems may help
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • [SOLVED] KDE buggy desktop effects in OpenGL

    Hello, I've been using gnome as my desktop environment for a while now and I decided to give KDE a try once again, but I'm having some issues.
    Everything was perfect:
    http://i42.tinypic.com/14l1x8p.jpg
    But I noticed that whenever I snap a window to any side of the screen and the stretching effect is displayed this happens:
    http://i44.tinypic.com/dm9oyg.png
    And If I go back to a small window:
    http://i40.tinypic.com/104p15i.png
    Now, as soon as I click elsewhere those black/invisible boxes are gone.
    As you can see I checked under system settings >> desktop effects >> advanced and, if I change the Compositing Type to Xrenderer the problems are gone, but as you can imagine that is not ideal, this ONLY happens when I select ANY version of OpenGL as the Compositing Type.
    I use the proprietary AMD drivers for my HD 6770, I think this problem might have something to do with that.
    Any help would be appreciated.
    Thanks in advance.
    Last edited by LucetLux (2013-10-14 04:30:07)

    I have replaced your images with links. Please read our forum etiquette concerning images (link in my sig).

  • [SOLVED] NO desktop effects in KDE 4.7.0 with OpenGL as backend

    Hey all,
    After upgrading from KDE 4.7 RC2 (4.6.95) to 4.7.0, Kwin desktop effects work no more (with OpenGL as backend). I tried upgrading catalyst from 11.6 to 11.7, removing all Kwin related config files and even a new user, but nothing changed. I'm using kdebase-workspace 4.7.0-3 from [kde-unstable] repo. Should I wait for an update, install kdebase-workspace from testing repo or what?
    Last edited by Pyruzan (2011-07-29 17:08:24)

    You are using a version with OpenGL ES enabled. But this doesn't seem to work with ATI cards.
    At least not with Catalyst: https://bbs.archlinux.org/viewtopic.php … 53#p966953 looks like radeon works.
    Use kdebase-workspace 4.7.0-2 from testing instead.
    Last edited by Xerdomii (2011-07-29 15:50:47)

Maybe you are looking for