[solved] dhcp-problems after updating package networkmanager 0.9.4.0-6

Hi,
I have some problems to get an ip address with dhcp on the device eth0. On wlan0 I get a ip address with dhcp depending on the network.
Anyone with the same problem after the update from version 5 to version 6?
After downgrading to version 5 everything works fine...
Thank you!
EDIT:
Don't know what it was, today after updating only networkmanager everything works fine.
Last edited by yannsen (2012-06-19 08:23:52)

Similar Messages

[Solved] Boot problem after update

After updating my Archlinux (64bit) installation and rebooting it a few minutes ago
I have encountered the following problem. The boot process is hanging after
activation of logical volumes. Here are the boot messages:
Booting the kernel.
:: Staring udevd...
done.
:: Running Hook [udev]
:: Triggering uevents…done.
:: Running Hook [lvm2]
Activating logical volumes…
15 logical volume(s) in volume group "system" now active
I have also tried the fallback kernel. The same problem!
What is going wrong?
Regards
Nik
Last edited by nitralime (2012-04-29 10:41:31)

jasonwryan wrote:
I thought I was.
The first clause in the sentence tells you that you can search the boards for the answer; the second provides the high-level solution.
https://bbs.archlinux.org/viewtopic.php?id=140439
Thank you for the link!

[Solved] Several problems after update

Hi.
I updated my system (yaourt -Syua).
Since then I have three problems, I don't know how much connected to each other.
First,
I can't enter LXDE. After I login, I get back the login screen of xdm.
When I go init 3, and start startx from console, then I get a black screen, until I do AltCtrlF7.
Meanwhile on the console this happens:
[laca@varch ~]$ startx
X.Org X Server 1.12.4
... etc ... etc ...
errors from xkbcomp are not fatal to the X server
No protocol specified
waiting for X server to begin accepting connections .
No protocol specified
No protocol specified
No protocol specified
No protocol specified
and so on.
Second,
My .Xauthority and .bash_history files got reset to 0 length.
And every time I log out, or explicitly do a history -w , the .bash_history file gets touched, but remains 0 length.
Third,
When I ssh with X forwarding to that machine, and want to start an X client, then I get:
X11 connection rejected because of wrong authentication.
(It may be independent of the update.)
Any help appreciated.
Laca
Last edited by Laca (2012-10-01 17:34:35)

[2012-09-24 20:58] Running 'pacman -Sy'
[2012-09-24 20:58] synchronizing package lists
[2012-09-24 20:59] Running 'pacman -S core/pinentry core/libpipeline core/sysvinit core/hwids core/sudo core/man-db core/util-linux core/procps-ng core/archlinux-keyring core/make core/tzdata core/automake core/coreutils core/sysvinit-tools extra/libsigc++ extra/sdl extra/samba extra/gtk2 extra/gtk-update-icon-cache extra/git extra/lcms2 extra/hunspell extra/taglib extra/smbclient extra/libwbclient extra/qt extra/vala community/libfm community/pcmanfm'
[2012-09-24 21:00] Running 'pacman -Sy'
[2012-09-24 21:00] synchronizing package lists
[2012-09-24 21:04] Running 'pacman -S -u'
[2012-09-24 21:04] starting full system upgrade
[2012-09-24 21:06] Running 'pacman -Sy'
[2012-09-24 21:06] synchronizing package lists
[2012-09-24 21:07] Running 'pacman -S core/pinentry core/libpipeline core/sysvinit core/hwids core/sudo core/man-db core/util-linux core/procps-ng core/archlinux-keyring core/make core/tzdata core/automake core/coreutils core/sysvinit-tools extra/libsigc++ extra/sdl extra/samba extra/gtk2 extra/gtk-update-icon-cache extra/git extra/lcms2 extra/hunspell extra/taglib extra/smbclient extra/libwbclient extra/qt extra/vala community/libfm community/pcmanfm'
[2012-09-24 21:09] removed eject (2.1.5-7)
[2012-09-24 21:09] upgraded pinentry (0.8.1-4 -> 0.8.2-1)
[2012-09-24 21:09] upgraded libpipeline (1.2.1-1 -> 1.2.2-1)
[2012-09-24 21:09] upgraded util-linux (2.21.2-5 -> 2.22-6)
[2012-09-24 21:09] upgraded coreutils (8.17-3 -> 8.19-1)
[2012-09-24 21:09] upgraded sysvinit-tools (2.88-7 -> 2.88-8)
[2012-09-24 21:09] upgraded sysvinit (2.88-7 -> 2.88-8)
[2012-09-24 21:09] upgraded hwids (20120831-1 -> 20120906-1)
[2012-09-24 21:09] upgraded sudo (1.8.6-1 -> 1.8.6.p3-1)
[2012-09-24 21:09] upgraded man-db (2.6.2-1 -> 2.6.3-1)
[2012-09-24 21:09] upgraded procps-ng (3.3.3-3 -> 3.3.3-6)
[2012-09-24 21:09] upgraded archlinux-keyring (20120812-1 -> 20120915-1)
[2012-09-24 21:09] upgraded make (3.82-4 -> 3.82-5)
[2012-09-24 21:09] upgraded tzdata (2012e-1 -> 2012f-1)
[2012-09-24 21:09] upgraded automake (1.12.3-1 -> 1.12.4-1)
[2012-09-24 21:09] upgraded libsigc++ (2.2.10-2 -> 2.2.11-1)
[2012-09-24 21:09] upgraded sdl (1.2.15-2 -> 1.2.15-3)
[2012-09-24 21:09] upgraded libwbclient (3.6.7-2 -> 3.6.8-1)
[2012-09-24 21:09] upgraded smbclient (3.6.7-2 -> 3.6.8-1)
[2012-09-24 21:10] upgraded samba (3.6.7-2 -> 3.6.8-1)
[2012-09-24 21:10] upgraded gtk-update-icon-cache (2.24.12-1 -> 2.24.13-1)
[2012-09-24 21:11] upgraded gtk2 (2.24.12-1 -> 2.24.13-1)
[2012-09-24 21:12] upgraded git (1.7.12-1 -> 1.7.12.1-1)
[2012-09-24 21:12] upgraded lcms2 (2.3-2 -> 2.4-1)
[2012-09-24 21:12] upgraded hunspell (1.3.2-1 -> 1.3.2-2)
[2012-09-24 21:12] upgraded taglib (1.7.2-2 -> 1.8-1)
[2012-09-24 21:14] upgraded qt (4.8.2-3 -> 4.8.3-3)
[2012-09-24 21:14] installed vala (0.16.1-1)
[2012-09-24 21:16] upgraded libfm (1.0-2 -> 1.0.1-1)
[2012-09-24 21:16] upgraded pcmanfm (1.0-1 -> 1.0.1-1)
[2012-09-24 21:31] Running 'pacman -Sy'
[2012-09-24 21:31] synchronizing package lists
[2012-09-24 21:31] Running 'pacman -S -u'
[2012-09-24 21:31] starting full system upgrade
[2012-09-24 21:33] removed virtualbox-archlinux-modules (4.1.22-1)
[2012-09-24 21:33] removed virtualbox-archlinux-additions (4.1.22-1)
[2012-09-24 21:33] >>> Updating module dependencies. Please wait ...
[2012-09-24 21:33] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2012-09-24 21:33] ==> Building image from preset: 'default'
[2012-09-24 21:33] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2012-09-24 21:33] ==> Starting build: 3.5.4-1-ARCH
[2012-09-24 21:33] -> Running build hook: [base]
[2012-09-24 21:33] -> Running build hook: [udev]
[2012-09-24 21:33] -> Running build hook: [autodetect]
[2012-09-24 21:33] -> Running build hook: [pata]
[2012-09-24 21:33] -> Running build hook: [scsi]
[2012-09-24 21:33] -> Running build hook: [sata]
[2012-09-24 21:33] -> Running build hook: [uresume]
[2012-09-24 21:33] -> Running build hook: [filesystems]
[2012-09-24 21:33] -> Running build hook: [usbinput]
[2012-09-24 21:33] -> Running build hook: [fsck]
[2012-09-24 21:34] ==> Generating module dependencies
[2012-09-24 21:34] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2012-09-24 21:34] ==> Image generation successful
[2012-09-24 21:34] ==> Building image from preset: 'fallback'
[2012-09-24 21:34] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2012-09-24 21:34] ==> Starting build: 3.5.4-1-ARCH
[2012-09-24 21:34] -> Running build hook: [base]
[2012-09-24 21:34] -> Running build hook: [udev]
[2012-09-24 21:34] -> Running build hook: [pata]
[2012-09-24 21:34] -> Running build hook: [scsi]
[2012-09-24 21:34] -> Running build hook: [sata]
[2012-09-24 21:34] -> Running build hook: [uresume]
[2012-09-24 21:34] -> Running build hook: [filesystems]
[2012-09-24 21:34] -> Running build hook: [usbinput]
[2012-09-24 21:34] -> Running build hook: [fsck]
[2012-09-24 21:34] ==> Generating module dependencies
[2012-09-24 21:34] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2012-09-24 21:34] ==> Image generation successful
[2012-09-24 21:34] upgraded linux (3.5.3-1 -> 3.5.4-1)
[2012-09-24 21:34] upgraded linux-headers (3.5.3-1 -> 3.5.4-1)
[2012-09-24 21:34] ===> You may want to load vboxguest, vboxsf and vboxvideo
[2012-09-24 21:34] installed virtualbox-guest-modules (4.2.0-2)
[2012-09-24 21:34] installed virtualbox-guest-utils (4.2.0-3)
[2012-09-24 21:35] Running 'pacman -S community/doublecmd-gtk2'
[2012-09-24 21:36] /usr/bin/update-desktop-database
[2012-09-24 21:36] /usr/bin/update-mime-database
[2012-09-24 21:36] /usr/bin/gtk-update-icon-cache
[2012-09-24 21:36] installed doublecmd-gtk2 (0.5.4-2.1)
Hvala
Laca

[solved] audio problem after update

hi, after the kernel update of yesterday i have a problem with my audio. after a reboot, my audio is totally absent. i have saw that the pulseaudio process is present and activate, and all graphically is ok (all indicators works well). the strange thing is that if i put headphones and then i releave them, all magically works normally!
Last edited by blauman (2014-06-19 17:12:06)

ok i don't need it...i have solved with
Load equalizer and dbus module on every boot
Edit the file /etc/pulse/default.pa with your favorite editor and append the following lines:
### Load the integrated PulseAudio equalizer and D-Bus module
load-module module-equalizer-sink
load-module module-dbus-protocol
on wiki of pulseaudio...i don't know why, i had already done it in past, but i don't know why on my default.pa there aren't these lines..seems now it works!

[Solved] Pulseaudio problem after update

So, here is the deal. I have been watching movies, playing HoN and listening to music on Sunday, Everything worked fine.
On monday, I updated the system remotely - from work: packer -Syu
Here is the pacman log:
[2012-07-09 11:36] Running 'pacman -S syslinux'
[2012-07-09 11:36] Syslinux update successful
[2012-07-09 11:36] upgraded syslinux (4.05-4 -> 4.05-4)
[2012-07-09 15:57] Running 'pacman -Syu'
[2012-07-09 15:57] synchronizing package lists
[2012-07-09 15:57] starting full system upgrade
[2012-07-09 16:21] upgraded alsa-plugins (1.0.25-1 -> 1.0.25-2)
[2012-07-09 16:21] upgraded audacious-plugins (3.2.4-1 -> 3.2.4-2)
[2012-07-09 16:21] upgraded linux-api-headers (3.3.8-1 -> 3.4.4-1)
[2012-07-09 16:21] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2012-07-09 16:21] Generating locales...
[2012-07-09 16:21] en_US.UTF-8... done
[2012-07-09 16:21] en_US.ISO-8859-1... done
[2012-07-09 16:21] Generation complete.
[2012-07-09 16:21] upgraded glibc (2.15-12 -> 2.16.0-1)
[2012-07-09 16:21] upgraded binutils (2.22-7 -> 2.22-8)
[2012-07-09 16:21] upgraded dbus-core (1.6.0-5 -> 1.6.2-2)
[2012-07-09 16:21] upgraded dbus (1.6.0-1 -> 1.6.2-1)
[2012-07-09 16:21] upgraded device-mapper (2.02.96-2 -> 2.02.96-3)
[2012-07-09 16:21] upgraded x264 (20120204-1 -> 20120705-1)
[2012-07-09 16:21] upgraded ffmpeg (20120509-1 -> 1:0.11.1-1)
[2012-07-09 16:21] upgraded ffmpegthumbnailer (2.0.7-4 -> 2.0.7-5)
[2012-07-09 16:21] upgraded freerdp (1.0.1-4 -> 1.0.1-5)
[2012-07-09 16:21] upgraded gcc-libs (4.7.1-3 -> 4.7.1-4)
[2012-07-09 16:22] upgraded gcc (4.7.1-3 -> 4.7.1-4)
[2012-07-09 16:22] upgraded gegl (0.2.0-1 -> 0.2.0-2)
[2012-07-09 16:22] upgraded grep (2.12-1 -> 2.13-1)
[2012-07-09 16:22] upgraded gstreamer0.10-ugly (0.10.19-1 -> 0.10.19-2)
[2012-07-09 16:22] upgraded gstreamer0.10-ugly-plugins (0.10.19-1 -> 0.10.19-2)
[2012-07-09 16:22] >>please run /usr/sbin/cups-genppdupdate
[2012-07-09 16:22] >>and restart cups deamon
[2012-07-09 16:22] upgraded gutenprint (5.2.8-1 -> 5.2.9-1)
[2012-07-09 16:22] upgraded imagemagick (6.7.7.10-1 -> 6.7.8.1-1)
[2012-07-09 16:22] upgraded imdbpy (4.8.2-2 -> 4.9-1)
[2012-07-09 16:22] upgraded initscripts (2012.06.3-1 -> 2012.06.3-2)
[2012-07-09 16:22] upgraded lib32-glibc (2.15-11 -> 2.16.0-1)
[2012-07-09 16:22] upgraded lib32-dbus-core (1.6.0-1 -> 1.6.2-1)
[2012-07-09 16:22] upgraded lib32-gcc-libs (4.7.1-3 -> 4.7.1-4.1)
[2012-07-09 16:22] upgraded lib32-libidn (1.24-1 -> 1.25-1)
[2012-07-09 16:22] upgraded lib32-libjpeg-turbo (1.2.0-1 -> 1.2.1-1)
[2012-07-09 16:22] upgraded libmysqlclient (5.5.25-1 -> 5.5.25.a-1)
[2012-07-09 16:22] upgraded libpurple (2.10.4-2 -> 2.10.6-1)
[2012-07-09 16:22] upgraded lvm2 (2.02.96-2 -> 2.02.96-3)
[2012-07-09 16:22] upgraded mingw32-pthreads (2.8.0-3 -> 2.9.1-1)
[2012-07-09 16:22] upgraded mpd (0.17-1 -> 0.17-2)
[2012-07-09 16:22] upgraded mpfr (3.1.0.p10-1 -> 3.1.1-1)
[2012-07-09 16:22] upgraded mplayer (34799-1 -> 35014-1)
[2012-07-09 16:22] upgraded mysql-clients (5.5.25-1 -> 5.5.25.a-1)
[2012-07-09 16:22] upgraded pidgin (2.10.4-2 -> 2.10.6-1)
[2012-07-09 16:22] installed tinycdb (0.78-1)
[2012-07-09 16:22] warning: /etc/postfix/main.cf installed as /etc/postfix/main.cf.pacnew
[2012-07-09 16:22] upgraded postfix (2.9.3-1 -> 2.9.3-2)
[2012-07-09 16:22] upgraded timidity++ (2.13.2-11 -> 2.14.0-1)
[2012-07-09 16:22] upgraded transmission-cli (2.52-1 -> 2.60-1)
[2012-07-09 16:22] upgraded transmission-gtk (2.52-1 -> 2.60-1)
[2012-07-09 16:22] upgraded upower (0.9.16-1 -> 0.9.17-1)
[2012-07-09 16:22] upgraded vlc (2.0.2-1 -> 2.0.2-2)
[2012-07-09 22:34] Running 'pacman -S links'
[2012-07-09 22:35] installed links (2.7-1)
[2012-07-09 23:38] Running 'pacman -Syu'
[2012-07-09 23:38] synchronizing package lists
[2012-07-09 23:38] starting full system upgrade
[2012-07-09 23:39] upgraded clementine (1.0.1-4 -> 1.0.1-6)
[2012-07-09 23:39] upgraded dialog (1.1_20120215-1 -> 1.1_20120706-1)
[2012-07-09 23:39] upgraded mpg123 (1.14.2-1 -> 1.14.3-1)
[2012-07-09 23:39] upgraded xorg-server-common (1.12.2-1 -> 1.12.3-1)
[2012-07-09 23:39] upgraded xorg-server (1.12.2-1 -> 1.12.3-1)
[2012-07-09 23:40] Running 'pacman -U alacarte-3.5.3-1-any.pkg.tar.xz'
[2012-07-09 23:40] upgraded alacarte (0.13.4-2 -> 3.5.3-1)
[2012-07-09 23:50] Running 'pacman -S pulseaudio-alsa'
[2012-07-09 23:58] Running 'pacman -U asoundconf-1:1.0.1-3-any.pkg.tar.xz'
[2012-07-09 23:59] installed asoundconf (1:1.0.1-3)
[2012-07-10 00:08] Running 'pacman -Rn pulseaudio pavucontrol pulseaudio_ctl pamixer-git pasystray-git'
[2012-07-10 00:08] Running 'pacman -Rn pulseaudio pavucontrol pamixer-git pasystray-git'
[2012-07-10 00:08] Running 'pacman -Rn pulseaudio pavucontrol'
[2012-07-10 00:09] Running 'pacman -Rn pulseaudio pavucontrol pulseaudio-alsa'
[2012-07-10 00:28] Running 'pacman -Rsu speech-dispatcher'
[2012-07-10 00:29] Running 'pacman -Rsu espeak'
[2012-07-10 00:29] Running 'pacman -Rsu festival'
[2012-07-10 14:30] Running 'pacman -Syu'
[2012-07-10 14:30] synchronizing package lists
[2012-07-10 14:30] starting full system upgrade
[2012-07-10 14:31] upgraded unetbootin (575-1 -> 577-1)
[2012-07-10 14:31] Running 'pacman -U gmameui-0.2.12-3-x86_64.pkg.tar.xz'
[2012-07-10 14:31] upgraded gmameui (0.2.12-2 -> 0.2.12-3)
As you can see, earlier that day (before work) I (re)installed syslinux. System boots fine. I don't think this is an issue (but hey, whattoIknow )
So, I started the upgrade at 15:57. It finished, and I rebooted after. Like I always do.
Fast forward, come home. No sound!
Check speakers: plugged in/turned on
Check pavucontrol - only dummy device available. Even if I choose "show all devices".
Check alsamixer - default device "pulseaudio". F6, change to Intel - shows mixers OK.
Set some program to use ALSA. Play music - works.
Hm....
Could anyone help me out here? Where do I start troubleshooting next, and how do I resolve this?
This issue might or might not be related to this topic:
Edit:
Either MPD or timidity++ was causing my soundcard to appear "busy" for pulse. After removing both daemons from rc.conf, pulse started working normally once again. I will update this thread if I find a solution to keep both timidity and mpd with working pulse. Keep an eye on new posts.
A big thanks to lucke for helping me out!
Last edited by Kaurin (2012-07-10 16:35:58)

this is the output:
[milos@Kaurinov ~]$ sudo pulseaudio -k
E: [pulseaudio] main.c: Failed to kill daemon: No such process
[milos@Kaurinov ~]$ sudo pulseaudio -vvvv
W: [pulseaudio] main.c: This program is not intended to be run as root (unless --system is specified).
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: setpriority() worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 2.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.4.4-2-ARCH #1 SMP PREEMPT Sun Jun 24 18:59:47 CEST 2012
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is a18a39a519d3813ab73cc383000003e3.
I: [pulseaudio] main.c: Using runtime directory /root/.pulse/a18a39a519d3813ab73cc383000003e3-runtime.
I: [pulseaudio] main.c: Using state directory /root/.pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/root/.pulse/a18a39a519d3813ab73cc383000003e3-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/root/.pulse/a18a39a519d3813ab73cc383000003e3-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/root/.pulse/a18a39a519d3813ab73cc383000003e3-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/root/.pulse/a18a39a519d3813ab73cc383000003e3-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/root/.pulse/a18a39a519d3813ab73cc383000003e3-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/root/.pulse/a18a39a519d3813ab73cc383000003e3-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
D: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1d.7/usb8/8-3/8-3.3/8-3.3:1.2/sound/card1 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera" card_name="alsa_card.usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] reserve-wrap.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: /usr/bin/dbus-launch terminated abnormally with the following error: PuTTY X11 proxy: wrong authorisation protocol attemptedAutolaunch error: X11 initialization failed.
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround40:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)conf.c: Unknown parameters 1
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM surround51:1
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0p' failed (-2)
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2'
I: [pulseaudio] (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory
I: [pulseaudio] (alsa-lib)conf.c: Evaluate error: No such file or directory
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM hdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-mono
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 10922 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4797 samples), period size second (to 1199 samples).
I: [pulseaudio] alsa-util.c: Device hw:1 doesn't support 44100 Hz, changed to 48000 Hz.
D: [pulseaudio] alsa-mixer.c: Profile input:analog-mono supported.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-front'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-front', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-rear'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-rear', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-internal'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Front Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Rear Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Int Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-internal', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone-dock'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Dock Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-microphone-dock', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-microphone'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Mic Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=1, switch=1, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Select' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost (+20dB)' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-linein'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'Line Jack' succeeded (not found)
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Input Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture Source' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Dock Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Front Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Rear Mic Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic Jack Mode' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Skipping path 'analog-input-linein', none of required-any elements preset.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-video'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input-radio'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'TV Tuner' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'FM' failed.
D: [pulseaudio] alsa-mixer.c: Probing path 'analog-input'
D: [pulseaudio] alsa-mixer.c: Probe of element 'Capture' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic' succeeded (volume=2, switch=2, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Internal Mic' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Line Boost' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Aux' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Video' succeeded (volume=0, switch=0, enumeration=0).
D: [pulseaudio] alsa-mixer.c: Probe of element 'Mic/Line' failed.
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x13bd500, direction=2
D: [pulseaudio] alsa-mixer.c: Path analog-input-microphone (Microphone), direction=2, priority=87, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=2, min_dB=30, max_dB=50
D: [pulseaudio] alsa-mixer.c: Element Mic, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection unavailable
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying front:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:front:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:front:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:front:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:front:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:front:1: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-4-channel-input
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog 4-channel Input (analog-4-channel-input)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying hw:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:hw:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:hw:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:hw:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open iec958:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying iec958:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open iec958:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:iec958:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Trying plug:iec958:1 without SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open plug:iec958:1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_channels(2) failed: Invalid argument
I: [pulseaudio] alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument
D: [pulseaudio] alsa-mixer.c: Profile set 0x1376860, auto_profiles=yes, probed=yes, n_mappings=1, n_profiles=1, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping analog-mono (Analog Mono), priority=1, channel_map=mono, supported=yes, direction=0
D: [pulseaudio] alsa-mixer.c: Profile input:analog-mono (Analog Mono Input), priority=1, supported=yes n_input_mappings=1, n_output_mappings=0
D: [pulseaudio] alsa-mixer.c: Input analog-mono
D: [pulseaudio] module-card-restore.c: Database contains invalid data for key: alsa_card.usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera (probably pre-v1.0 data)
D: [pulseaudio] module-card-restore.c: Attempting to load legacy (pre-v1.0) data for key: alsa_card.usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera
D: [pulseaudio] module-card-restore.c: Size does not match.
D: [pulseaudio] module-card-restore.c: Unable to load legacy (pre-v1.0) data for key: alsa_card.usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera. Ignoring.
I: [pulseaudio] card.c: Created 0 "alsa_card.usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera"
D: [pulseaudio] reserve-wrap.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.Spawn.ExecFailed: /usr/bin/dbus-launch terminated abnormally with the following error: PuTTY X11 proxy: wrong authorisation protocol attemptedAutolaunch error: X11 initialization failed.
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hw:1
I: [pulseaudio] alsa-util.c: cannot disable ALSA period wakeups
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 10922 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 96000 samples), period size second (to 96000 samples).
I: [pulseaudio] alsa-util.c: Device hw:1 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-source.c: Successfully opened device hw:1.
I: [pulseaudio] alsa-source.c: Selected mapping 'Analog Mono' (analog-mono).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Added 1 ports
D: [pulseaudio] module-device-restore.c: Database contains invalid data for key: source:alsa_input.usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera.analog-mono:null
W: [pulseaudio] source.c: Default and alternate sample rates are the same.
I: [pulseaudio] source.c: Created source 0 "alsa_input.usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera.analog-mono" with sample spec s16le 1ch 48000Hz and channel map mono
I: [pulseaudio] source.c: alsa.resolution_bits = "16"
I: [pulseaudio] source.c: device.api = "alsa"
I: [pulseaudio] source.c: device.class = "sound"
I: [pulseaudio] source.c: alsa.class = "generic"
I: [pulseaudio] source.c: alsa.subclass = "generic-mix"
I: [pulseaudio] source.c: alsa.name = "USB Audio"
I: [pulseaudio] source.c: alsa.id = "USB Audio"
I: [pulseaudio] source.c: alsa.subdevice = "0"
I: [pulseaudio] source.c: alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c: alsa.device = "0"
I: [pulseaudio] source.c: alsa.card = "1"
I: [pulseaudio] source.c: alsa.card_name = "USB2.0_Camera"
I: [pulseaudio] source.c: alsa.long_card_name = "PixArt Imaging Inc. USB2.0_Camera at usb-0000:00:1d.7-3.3, high speed"
I: [pulseaudio] source.c: alsa.driver_name = "snd_usb_audio"
I: [pulseaudio] source.c: device.bus_path = "pci-0000:00:1d.7-usb-0:3.3:1.2"
I: [pulseaudio] source.c: sysfs.path = "/devices/pci0000:00/0000:00:1d.7/usb8/8-3/8-3.3/8-3.3:1.2/sound/card1"
I: [pulseaudio] source.c: udev.id = "usb-PixArt_Imaging_Inc._USB2.0_Camera-02-USB20Camera"
I: [pulseaudio] source.c: device.bus = "usb"
I: [pulseaudio] source.c: device.vendor.id = "093a"
I: [pulseaudio] source.c: device.vendor.name = "Pixart Imaging, Inc."
I: [pulseaudio] source.c: device.product.id = "2700"
I: [pulseaudio] source.c: device.product.name = "USB2.0_Camera"
I: [pulseaudio] source.c: device.serial = "PixArt_Imaging_Inc._USB2.0_Camera"
I: [pulseaudio] source.c: device.form_factor = "webcam"
I: [pulseaudio] source.c: device.string = "hw:1"
I: [pulseaudio] source.c: device.buffering.buffer_size = "192000"
I: [pulseaudio] source.c: device.buffering.fragment_size = "96000"
I: [pulseaudio] source.c: device.access_mode = "mmap+timer"
I: [pulseaudio] source.c: device.profile.name = "analog-mono"
I: [pulseaudio] source.c: device.profile.description = "Analog Mono"
I: [pulseaudio] source.c: device.description = "USB2.0_Camera Analog Mono"
I: [pulseaudio] source.c: alsa.mixer_name = "USB Mixer"
I: [pulseaudio] source.c: alsa.components = "USB093a:2700"
I: [pulseaudio] source.c: module-udev-detect.discovered = "1"
I: [pulseaudio] source.c: device.icon_name = "camera-web-usb"
I: [pulseaudio] alsa-source.c: Using 2.0 fragments of size 96000 bytes (1000.00ms), buffer size is 192000 bytes (2000.00ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 36.75ms
D: [pulseaudio] alsa-source.c: hwbuf_unused=0
D: [pulseaudio] alsa-source.c: setting avail_min=94237
D: [pulseaudio] alsa-mixer.c: Activating path analog-input-microphone
D: [pulseaudio] alsa-mixer.c: Path analog-input-microphone (Microphone), direction=2, priority=87, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=2, min_dB=30, max_dB=50
D: [pulseaudio] alsa-mixer.c: Element Mic, direction=2, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
D: [pulseaudio] alsa-mixer.c: Jack Mic, alsa_name='Mic Jack', detection unavailable
I: [pulseaudio] alsa-source.c: Successfully enabled deferred volume.
I: [pulseaudio] alsa-source.c: Hardware volume ranges from 30.00 dB to 50.00 dB.
I: [pulseaudio] alsa-source.c: Fixing base volume to -50.00 dB
I: [pulseaudio] alsa-source.c: Using hardware volume control. Hardware dB scale supported.
I: [pulseaudio] alsa-source.c: Using hardware mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hardware PCM card 1 'USB2.0_Camera' device 0 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c: stream : CAPTURE
D: [pulseaudio] alsa-util.c: access : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c: format : S16_LE
D: [pulseaudio] alsa-util.c: subformat : STD
D: [pulseaudio] alsa-util.c: channels : 1
D: [pulseaudio] als

WLC 5508, DHCP Problem after Update Cisco ASA(DHCP-Server)

Hello,
our Problem is, our Apple Devices get no ip adress from our Cisco ASA Cluster(ASA 9.1.2) over Wireless(Cisco WLC 5508). All other devices(Windows, Android,...) work correct, without problems. Our WLC is in HA-Mode.
Does anybody have an Idea?
Thank you very much and Best regards,
Stefan

Hello again,
I hope this case is the solution.
https://supportforums.cisco.com/message/3942112#3942112
I will let you know after downgrade.
Best regards,
Stefan

[SOLVED] X problem after update

I recently ran an update (via pacman) and now when I reboot, not only does slim not start (from daemons), when I type startx (tried both users), I get:
/etc/X11/xinit/xserverrc: line 1: /usr/bin/X: Success
giving up
xinit: No such file or directory (errno 2): unable to connect to X server
xinit: No such process (errno 3): Server error
Can someone please make sense of this? I use openbox as a WM if that helps (I doubt it does). It worked perfectly before the update and all of the daemons such as hal load on boot, so that can be eliminated.
I have also noticed that dhcpcd is far slower now.
Last edited by itsbrad212 (2010-03-14 17:38:42)

n0dix wrote:
Try reinstalling xorg,
pacman -Syf xorg
That's strange. I tried that before making this post, but it didn't work until now Thanks

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~

Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60)

Cpufrequtils problem after update

Hello!
I've a problem after update my system with pacman -Syu.
When system loads cpufreq i've this problem:
cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
I try uninstall the cpufrequtils package and reinstall it but doesn't works
How can i fix it?
thanks.

raskolnikov wrote:
No need of cpufrequtils :
$ cat /etc/rc.local
#!/bin/sh
echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
That's ok. And of course powernow-k7 in MODULES array of rc.conf
Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes. It's just a nice wrapper for that.
raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
Errm, blame me - that file should be backed up. Thankfully, it's not a giant config file.

I have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

i have a problem after update version 6.0.1, the call not smoothly. how is your ideas?

Hi all
Like to share that my AV Adapter problem is solved ... brought it to Apple Service Center as a last resort after the new iOS v5.1 did not solve mine like some others have theirs solved.
In fact, the Apple Service Center tried my AV Adapter and find that it does not work with their iphone and ipad too and flagged for a replacement.
Just this week collected the replacement and tested that the replaced adapter works !
So this "unsupported device" error msg could also be due to faulty adapter .... although it is unbelievable that a "simple" wired connector could so easily breakdown after 1 time use ! I never did believe that it can be broken so easily as we hardly used it after the first testing with our TV on HDMI.
Closing this chapter of mine finally.

[SOLVED]libtdb error after updating

i got a serious problem after updating like this:
$mplayer
mplayer: error while loading shared libraries: libtdb.so.1: cannot open shared object file: No such file or directory
maybe something about libtdb & libcanberra goes wrong...
can anybody solve the issue?
Last edited by shiningmoon (2009-02-22 11:43:19)

Maskawanian wrote:
I have this same error as well. shiningmoon would you be able to tell us how you fixed this?
Work around (downgrade):
pacman -U '/var/cache/pacman/pkg/smbclient-3.2.7-1-x86_64.pkg.tar.gz' '/var/cache/pacman/pkg/tdb-3.2.7-1-x86_64.pkg.tar.gz'
I assume you have x86_64, if not modify accordingly.
Works tnx:)

Mythbackend problem after update

I am facing the following problem after updating mythtv.
The installed packages are:
sip03ds ~ $ sudo yaourt -Ss mythtv | grep installed
extra/mythmusic 0.21-3 [installed] (mythtv-extras)
extra/mythtv 0.22-3 [installed] (pvr)
extra/mythvideo 0.21-2 [installed] (mythtv-extras)
extra/nuvexport 20090413-1 [installed]
after updating mythtv the backend refuses to start. Even though is displays that it is starting normally:
sip03ds ~ $ sudo /etc/rc.d/mythbackend start
:: Starting MythTV Backend [DONE]
sip03ds ~ $
for some reason it shows that the backend is unavailable.
sip03ds ~ $ mythfrontend
2009-11-21 10:32:59.615 mythfrontend version: tags/release-0-22 [0.22] www.mythtv.org
2009-11-21 10:32:59.668 Using runtime prefix = /usr
2009-11-21 10:32:59.668 Using configuration directory = /home/sip03ds/.mythtv
2009-11-21 10:33:00.548 Empty LocalHostName.
2009-11-21 10:33:00.549 Using localhost value of htpc
2009-11-21 10:33:00.570 New DB connection, total: 1
2009-11-21 10:33:00.587 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.588 Could not open settings file /home/sip03ds/.mythtv/config.xml for writing
2009-11-21 10:33:00.588 Closing DB connection named 'DBManager0'
2009-11-21 10:33:00.631 ScreenSaverX11Private: Gnome screen saver support enabled
2009-11-21 10:33:00.667 DPMS is active.
2009-11-21 10:33:00.710 Primary screen: 0.
2009-11-21 10:33:00.719 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:00.723 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:00.823 MythUI Image Cache size set to 20971520 bytes
2009-11-21 10:33:00.824 Enabled verbose msgs: important general
2009-11-21 10:33:00.889 Starting mythlcdserver
QWidget: Cannot create a QWidget when no GUI is being used
2009-11-21 10:33:01.408 Connecting to lcd server: localhost:6545 (try 1 of 10)
2009-11-21 10:33:01.911 Connecting to lcd server: localhost:6545 (try 2 of 10)
2009-11-21 10:33:02.412 Connecting to lcd server: localhost:6545 (try 3 of 10)
2009-11-21 10:33:02.913 Connecting to lcd server: localhost:6545 (try 4 of 10)
2009-11-21 10:33:03.414 Connecting to lcd server: localhost:6545 (try 5 of 10)
2009-11-21 10:33:03.915 Connecting to lcd server: localhost:6545 (try 6 of 10)
2009-11-21 10:33:04.416 Connecting to lcd server: localhost:6545 (try 7 of 10)
2009-11-21 10:33:04.917 Connecting to lcd server: localhost:6545 (try 8 of 10)
2009-11-21 10:33:05.417 Connecting to lcd server: localhost:6545 (try 9 of 10)
2009-11-21 10:33:05.918 Connecting to lcd server: localhost:6545 (try 10 of 10)
2009-11-21 10:33:06.471 Primary screen: 0.
2009-11-21 10:33:06.473 Using screen 0, 1280x800 at 0,0
2009-11-21 10:33:06.475 Using theme base resolution of 800x600
2009-11-21 10:33:06.500 LIRC, Error: Failed to connect to Unix socket '/var/run/lirc/lircd'
eno: No such file or directory (2)
2009-11-21 10:33:06.500 JoystickMenuThread Error: Joystick disabled - Failed to read /home/sip03ds/.mythtv/joystickmenurc
2009-11-21 10:33:08.531 Using the Qt painter
2009-11-21 10:33:08.535 Removing stale cache dir: /home/sip03ds/.mythtv/themecache/MythCenter-wide.1280.800
2009-11-21 10:33:08.557 Loaded base theme from /usr/share/mythtv/themes/MythCenter/base.xml
2009-11-21 10:33:08.891 Loaded base theme from /usr/share/mythtv/themes/default/base.xml
2009-11-21 10:33:08.897 New DB connection, total: 2
2009-11-21 10:33:08.897 New DB connection, total: 3
2009-11-21 10:33:08.902 New DB connection, total: 4
2009-11-21 10:33:08.906 Current MythTV Schema Version (DBSchemaVer): 1244
2009-11-21 10:33:08.910 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.926 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:08.927 Connected to database 'mythconverg' at host: htpc
2009-11-21 10:33:09.589 Desktop video mode: 1280x800 59.9125 Hz
2009-11-21 10:33:10.602 Registering Internal as a media playback plugin.
2009-11-21 10:33:10.958 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythmusic.so: undefined symbol: _ZNK15ComboBoxSetting9classNameEv
2009-11-21 10:33:10.958 Unable to initialize plugin 'mythmusic'.
2009-11-21 10:33:11.230 MythPlugin::init() dlerror: /usr/lib/mythtv/plugins/libmythvideo.so: undefined symbol: _ZNK7Setting9classNameEv
2009-11-21 10:33:11.230 Unable to initialize plugin 'mythvideo'.
2009-11-21 10:33:11.248 MMUnix::AddDevice() Error: failed to stat /dev/bdi,
eno: No such file or directory (2)
2009-11-21 10:33:11.259 MMUnix::AddDevice() Error: failed to stat /dev/power,
eno: No such file or directory (2)
2009-11-21 10:33:11.271 Loading window theme from /usr/share/mythtv/themes/MythCenter/menu-ui.xml
2009-11-21 10:33:11.377 Loading menu theme from /usr/share/mythtv/themes/defaultmenu//mainmenu.xml
2009-11-21 10:33:11.381 Found mainmenu.xml for theme 'MythCenter'
Any ideas or logs where to check would be more that appreciated.
Thanks
Last edited by sip03ds (2009-11-21 09:40:36)

I removed all the plugins and reinstalled mythtv. Configured it as advised on the wiki (without dropping the database schema) but the server is still not starting up correctly.
I found out that the server is starting and and stopping when I run:
sudo /etc/rc.d/mythbackend start
when I start the front end, the front end cannot connect to the back end because it is unavailable.
in case I start the server manually:
sudo mythbackend
I am able to connect via mythfrontend and mythtv is working correctly. Any suggestions to change the daemon script ?
Last edited by sip03ds (2009-11-21 22:56:51)

Bluetooth problem after update to lollipop

Hi,I've recently updated my 6503 to Lollipop.Everything went smoothly and is working fine, except 2 issues - one solved, second NOT. FIRST (solved) - phone after update waked up and logged to 2G network, with no data transmission (despite it was turned ON). What was strange - my operator's network appeared in 'available network list' as separate 3 NETWORKS ( 2g, 3g and LTE) Switching manually to LTE solved it - now phone is switching between technologies automatically, data transmission is working fine. SECOND AND NOT SOLVED: I'm using the hands-free system built in my car ( mitsubishi lancer, 2008 ) . After update, phone failed to establish connection with it, even hands-free system remained as 'associated device'. OK ... I erased hands-free system from phone, as well as phone from car's memory. Paired devices again - starting procedure from car's side. Nothing better. Erased and paired starting from phone side. Nothing better.What I've observed more: phone after try to establish connection , phone in eye blink looses it. On list of available services of hands-free system (in phone menu ofc) , only 'phone sound' appears, while -as I remember but i'm not sure- before update more (2 or 3) services were detected . PLEASE HEEELP !

Re: Bluetooth problem after update to lollipop As above post, I am also experiencing problems with bluetooth on my Z2:- Phone connection is OK if Bluetooth is turned on the phone for " car is ready". Then I can make and receive calls.
- Playing music on bluetooth does not work after Lollipop 5.0.2 update on my car head unit. Previously connected and able to stream music on 4.4.4 Kit Kat with no issues, looking on web this is not a new issue with Bluetooth connection issues to devices since Lollipop came out so what the **bleep** is going on? I purposely bought a Sony TV, Car Head Unit and Soundbar to ensure everything worked together now the head unit that I only had fiitted in February does not connect which cost me £249!!! No issues connecting to TV or Soundbar but on HU it tries to connect then disconnects and BT Audio Icon on HU display greys out although phone is connected and icon highlighted as connected. I have cleared cache, unpaired and paired again, reinstalled 5.0.2 again through wifi instead of OTA but still the same. Car device: Sony XAV-602BTAndroid version 5.0.2Version: 23.1.A.0.726

[solved] dhcp-problems after updating package networkmanager 0.9.4.0-6

Similar Messages

Maybe you are looking for