[Solved] Display current version of component being updated?

Hello everyone. I'm wondering, is it possible to get Pacman to display what the current version is of a component being updated. It's not all that helpful saying "version 1.5.2.1" is available when I have no idea what version I am currently using. Plus in case of boo-boos after updating and wanting to revert back, it would seem more intuitive to know what version was stable. Is it there and I'm just missing it?
Last edited by dr/owned (2009-01-10 07:58:57)

Look in /var/log/pacman.log. It has output like:
upgraded python (2.5.2-5 -> 2.6-1)

Similar Messages

Display Current version on which Abaper Is working

Hi Moderators ,
In SDN as there is Profile name   OR Id   below Profile ID There should   be Lable which should show that
ON which current version of SAP i. 4.7 or ECC 6.0 Abaper or Developer is working   . As the accrodingly   it will be easy for other Members to recognize the problem as per version .
This is my personal Suggestion   .
Make Mandatory for every Member of SDN to update current version in There Profile
regards
Deepak.
Edited by: Deepak Dhamat on Oct 20, 2011 12:27 PM
Edited by: Thomas Zloch on Oct 20, 2011 1:27 PM - code tags removed

Well for basis admins there should be a (long) list.
I work with
R/3 4.7 ext2
ECC6 EHP4
SRM 5.0
CRM 2007
PI 7.0
EP 7.0
MDM Catalog 5.5
Solman 7.0 EHP1
Cheers,
Olivier

I would like to try FF5 without losing my current version. Can I update my current version of FF and install the update in a different directory so I can have two versions at the same time?

current version is 3.6.17

I guess nobody knows if the crash that occured was legitimate or not? Apple phone support could do nothing for me, so I guess I am left to drive 45 minutes to the nearest store.

What is the Firefox start page looking for when it tells me I'm not using the most current version and need to update Firefox? The check for updates button says my version is up to date, but the start page disagrees. Is there a setting I need to adjust?

Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?

I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people.

Forcing a browser to ignore cache and display current version of a page

I just uploaded some revised pages to my site. When I went to view them online, the older pages displayed instead of the new ones - since the older ones were in my browser cache (same thing happens in both I.E. and Firefox). Going into I.E.'s Tools menu and deleting Temporary Internet Files fixes the problem on my machine, but if Joe Blow viewed my site recently, then checks again today, he's seeing the older versions - correct? So my question is, is there something I can do to my pages to force browsers to always display the latest version? Or is this something that can only be done locally by a visitor to the site (who, of course, won't have a clue that he's looking at an obsolete page and needs to delete his cache)?

no-cache meta tag has been around for a long time and may be that's enough for some cases, however it's worth noting:
It's not a "right" approach and therefore this meta tag is not a valid HTML5 (and should fail when you validate)
Therefore browsers may/should ignore it (although it may still work)
It will not prevent caching other than at the browser level, i.e. you still receive a cached copy from proxy servers
All other dependent files (scripts, styles, images etc) will still be cached
Kenneth Kawamoto
http://www.materiaprima.co.uk/

Trying to update my mac and the newest version is not being updated

I have been trying to update my mac desktop and it is not updating to the latest IO S version or itunes

A computer cannot run iOS. Do you mean Mac OS?
Get more information about your computer. Go to the Apple in the upper left corner of any window, then "About This Mac". Write down what it says about "version"and report that here. Now continue to "More Info..." Copy and paste the information here, but omit the serial number and Hardware UUID (if present). I suspect you are running an older computer in which case it is quite possible you cannot upgrade iTunes unless you can upgrade Mac OS which may not be possible if it is too old.

I have an iphone 3g ios 4.2.1 version to current version, how do i update new version?

Dear Sir/Madam,
I have an Iphone 3g ios 4.2.1 version, i need software to be updated newly version, kindly guide to me and one more need for creating Home Screen and Back Ground Themes settings, how do i make it this process. Kindly send guidlines video or step by step process guide. Please take the request for my humble request for my interest.
Thanks and Regards
G.Rajkumar

You don't. The 3G cannot be updated past 4.2.1

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

I'm trying to update my iphone 3GS to the 4.3.4 version and I am getting the error message "This version of itunes (version 9.1.1) is the current version. How do I update my PHONE and why is an itunes update being confused for my iphone?

You need iTunes 10.0 or greater to update your phone...iTunes isn't confused at all. If you're on a Mac, you'll need OS X 10.5.8 or greater to update iTunes to 10.0 or greater.

Can't update 8310 "Current Version"

Please help, my sanity is on the line...
I've gone through the process...
Downloaded the new application upgrade software, it gave me a pop-up towards the end with the usual "your system must be re-started to complete install..." I clicked "restart later" and let it finish. When it was done, nothing was different on my 8310 Curve (AT&T service if that means anything).
So, I powered down the blackberry, re-booted the laptop, powered up the blackberry, restarted the laptop.
Blackberry was just as it was before.
Checked the "About" and it indicated the 4.2 operating system was still in place.
So I repeated the process, thinking that perhaps my updated application downloader software hadn't been fully, uh, updated.
It went through the whole process again, then told me the device was updated.
Checked, the 8310 was just as it was before, no changes in functionality.
Checked "about" and it still showed the 4.2xxx OS.
So I powered it down, thinking maybe it needs a power cycle to finish updating.
Powered it up again, and still no changes, and still 4.2xxxxx
Re-connected, opened desktop manager, clicked on APPLICATION LOADER, clicked on the "updates" on the bottom right corner, which brings you back to the blackberry webpage, went through the whole thing again, and it tells memy device has the current software (and asks me if I'd like to register my email for software update emails).
Looking on the forum here, it appears that others with 8310's are successfully updating to the new OS, so what do I need to do to get the new toys?
Thanks in advance.

Simple answer is that ATT does NOT have the OS 4.5 upgrade. You do all that and it is only updating you to the latest version of 4.2 OS.
You can load the 4.5 upgrade manually if you like.
Here is the latest 4.5 release available if you want.
http://www.blackberryforums.com/general-8300-series-discussion-curve/159564-latest-os-8310-4-5-0-134...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

My performance is very slow when I run graphs. How do I increase the speed at which I can do other things while the data is being updated and displayed on the graphs?

I am doing an an aquisition and displaying the data on graphs. When I run the program it is slow. I think because I have the number of scans to read associated with my scan rate. It takes the number of seconds I want to display on the chart times the scan rate and feeds that into the number of samples to read at a time from the AI read. The problem is that it stalls until the data points are aquired and displayed so I cannot click or change values on the front panel until the updates occur on the graph. What can I do to be able to help this?

On Fri, 15 Aug 2003 11:55:03 -0500 (CDT), HAL wrote:
>My performance is very slow when I run graphs. How do I increase the
>speed at which I can do other things while the data is being updated
>and displayed on the graphs?
>
>I am doing an an aquisition and displaying the data on graphs. When I
>run the program it is slow. I think because I have the number of
>scans to read associated with my scan rate. It takes the number of
>seconds I want to display on the chart times the scan rate and feeds
>that into the number of samples to read at a time from the AI read.
>The problem is that it stalls until the data points are aquired and
>displayed so I cannot click or change values on the front panel until
>the updates occur on the graph. What can I do to be a
ble to help
>this?
It may also be your graphics card. LabVIEW can max the CPU and you
screen may not be refreshing very fast.
--Ray
"There are very few problems that cannot be solved by
orders ending with 'or die.' " -Alistair J.R Young

Can you install the update for Linksys EasyLink Advisor over the current version?

I was notified of a new update for Lela, Lela-3-11.9139.94. I saved the download to a file.
My question is as follows: Before installing the new version, do I need to uninstall the current version 3.0?
I just got the router running properly and do not want to mess anything up.
Solved!
Go to Solution.

I had v 2.0 working fine... I downloade the v3.0 "lela-3.11.9139.94.exe" and when the install is at the "installing JRE it hangs.. and never ends. I am using XP professional with latest fixes.. I tried to clear the reistry, Tried install 5 times, Allway tops at JRE.. Also installed latest SUN JRE.. I have no idea what i wrong.. Must be a bug in the install..
Any suggestion?
Reginaldo
Message Edited by rbarosa on 06-29-2009 06:28 PM
Message Edited by rbarosa on 06-29-2009 06:28 PM

HT4753 I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

I have a very simple question: how do I view where Lion has autosaved my current version to (without the convoluted route of using finder)? In days gone by i'd simply use the save as function to see where it was being saved.

It's actually even easier than using Save As to see the full path to the currently open document. Just do a "Secondary click" on the document title in its window's title bar.
Like you, I relied upon Save As my whole life to check a file's location and considered it a must-have capability. Turns out it's even faster to use the single-click method to reveal the full path to the open document. It displays the entire path to the current document starting from the level of your Mac, and works for files stored on drives as well as iCloud.
If you're not sure how to do a secondary click, go into System Preferences, select Trackpad, Point & Click to find the current preference for secondary click on your Mac. If you happen to have a mouse with more than one button, it's probably the right button. As a trackpad user, I check the box to "Click or tap with two fingers," so a simple two finger tap on the title of an open document reveals its full path. This feature actually has been around for a very long time.
Note that this is not the same thing as the Autosave and Versions menu, which is exposed using a little drop down triangle to the right of the title. There is no visual clue for the presence of this feature - you just have to know it's there, probably because this feature goes all the way back to pre-OS X days.

Tabular form Update Error,"Current version of data in database has changed

I'm getting an error when updating a Apex Tabular form. It's complaining that the row id's are out-of-sync. The error reads,' Current version of data in database has changed since user initiated update process. current row version identifier = "56DW5A8A7EBA3B42073AE6E71480A784" application row version identifier = "99B52A15F10E34647E9E18B6B7AE8C30" .
Has anyone received this error? Any solutions? Note that the primary is being populated by a trigger. I have another tabular form for a different application that updates without issue, this however, uses a sequence to update the primary key.
Thanks,
James

Make sure that the form is defined such that it "knows" that the PK is being set by a trigger. Do not try to set it in the form if the trigger is doing it. Pretty much if a trigger attempt to modify any column that also was editable (including hidden columns) in the form, the two will conflict.
The other issue could be that do you have any items on the rows that are disabled? Disabled items are not sent to session state so Apex won't be able to properly compute the checksum and it'll find a discrepancy.

Updates currently deployed development component

Hi All,
I have NWDI installed and been using for quite some time. I upgraded it to SP19. I have like 10 DC's and let us say i changed only one DC and check in and release, import, assemble and import into test system. In the log file, I see that all my 10 components are updated, shouldnt it just update the corresponding DC, why is it updating all the others too? i think this started happening to me after this version upgrade.
The snippet of how it looks like in the "SDM log"
Selected development component 'appl/broad'/'mycomp.com'/'MYTRACT_C'/'1032'/'2' updates currently deployed development component 'appl/borad'/'mycomp.com'/'MYTRACT_C'/'1032'/'1'.
Info:Jan 24, 2007 1:24:42 PM Info: Update: Selected development component 'appl/head'/'mycomp.com'/'MYTRACT_C'/'1027'/'2' updates currently deployed development component 'appl/head'/'mycomp.com'/'MYTRACT_C'/'1027'/'1'.
Info:Jan 24, 2007 1:24:42 PM Info: Update: Selected development component 'appl/structure'/'mycomp.com'/'MYTRACT_C'/'1029'/'2' updates currently deployed development component 'appl/structure'/'mycomp.com'/'MYTRACT_C'/'1029'/'1'.
Info:Jan 24, 2007 1:24:42 PM Info: Update: Selected development component 'appl/loginpar'/'mycomp.com'/'MYTRACT_C'/'1026'/'2' updates currently deployed development component 'appl/loginpar'/'mycomp.com'/'MYTRACT_C'/'1026'/'1'.
Info:Jan 24, 2007 1:24:42 PM Info: Update: Selected development component 'appl/iviewsepa'/'mycomp.com'/'MYTRACT_C'/'1041'/'0' updates currently deployed development component 'appl/iviewsepa'/'mycomp.com'/'MYTRACT_C'/'1038'/'0'.
Info:Jan 24, 2007 1:24:42 PM Info: Update: Selected development component 'appl/confidential'/'mycomp.com'/'MYTRACT_C'/'1023'/'2' updates currently deployed development component 'appl/confidential'/'mycomp.com'/'MYTRACT_C'/'1023'/'1'.
Info:Jan 24, 2007 1:24:42 PM Info: Update: Selected development component 'appl/trexanon'/'mycomp.com'/'MYTRACT_C'/'1024'/'2' updates currently deployed development component 'appl/trexanoni'/'mycomp.com'/'MYTRACT_C'/'1024'/'1'.
could you please look at that in your installations, if possible and let me know how it behaves?
thanks

Hi,
Even if one DC is changed/activated, during the transport, the assembly happens to the entire component, which means all the DCs in that SC. Its the assembled "software component" that gets transported to the QA system. And thats the theory behind rolling out a software unit in NWDI. Its normal AFAIK.
Hope that helps,
Thanks,
Rajit Srinivas

Wrong version of an entity bean object being updated

We are having a problem with an entity bean that uses bean managed persistence. The "order" entity bean has
been used as part of our Order Routing System for the last 2 years with no problems. The entity bean is
accessed via calls from a "Order Manager" session bean. No change has been done to the entity bean but the
frequency of calls from the session bean to update the entity bean have increased significantly.
The "order" entity bean wraps an Order object that contains order properties (i.e. id, quantity, price,
version, etc). The entity bean has a "void setOrder(Order param)" function that writes the Order to a database
and a "Order getOrder()" function that clones and returns the internal Order object. The "ejbLoad()" function
reads the Order object from the database and the "ejbStore()" function is not implemented.
The "OrderEntityPK ejbFindByPrimaryKey()" function checks if the order entity primary key (an "int") exists
on the database.
We are using the SilverStream 3.5 application server as our EJB container. According to the SilverStream manual
it does not maintain a pool of idle/unused entity beans, instead it instantiates beans as requested.
Our problem is:
1) The wrong version of the entity object is sometimes being updated (i.e. an old instance of the order entity is being
picked up and updated on the database).
2) We sometimes get a TransactionRequired exception thrown when we have concurrent updates to two different
objects of the entity bean.
Any idea as to what our problem could be?
Thanks in advance for your help,
The following are the main code snippets:
Original Code
Session Bean A
Method 1 --- gets entity Bean B and calls a method on a different object passing this entity bean
          in as a parameter to enable a method on this bean to be called.
EntityBean lOrderEntity = findOrderEntity(callerUnixLogin, currOrderId);
               currOrder = lOrderEntity.getOrder();
               //Logic to update the currOrder object via a method call.
               persistManager.persistOrder(lOrderEntity, callerUnixLogin, currOrder, psTransactionType);
     persistManager.persistOrder Method:
               lOrderEntity.setOrder(callerUnixLogin, order);
     findOrderEntity method:
OrderEntity lOrderEntity = null;
          OrderEntityBeanPK orderPK = new OrderEntityBeanPK(orderId);
          try
               if (orderEntityHome == null)
                    connectToOrderEntityBean(callerUnixLogin);
               lOrderEntity = orderEntityHome.findByPrimaryKey(orderPK);
          ... etc
Current Code
Session Bean C
Method 2 ---- calls method 1 in Session Bean A
Calls to method 2 above happens in quick succession.
OrderEntityBean class
... important methods ...
     private Order order = null;
     public OrderEntityBeanPK ejbFindByPrimaryKey(OrderEntityBeanPK primaryKey)
          throws FinderException, RemoteException, DBOException
          try
               orderObjectManager.orderIdExists(primaryKey.orderId);
          catch (OMOrderValidationException exc)
               throw new FinderException(exc.getMessage());
          return primaryKey;
     public void setOrder(String userUnixLogin, Order newOrder)
          throws EJBException, RemoteException, DBOException, OMFormattingException, OMOrderValidationException
          callerUnixLogin = userUnixLogin;
          int version = newOrder.getOrderVersion().intValue();
          if (order.getOrderVersion().intValue() == version)
               order = null;
               order = newOrder;
               Integer newVersion = new Integer(version + 1);
               order.setOrderVersion(newVersion);
               newVersion = null;
               order.setSysUser(callerUnixLogin);
               orderObjectManager.updateOrder(callerUnixLogin, order);
          else
               Debug.Print(userUnixLogin, "OrderEntityBean.setOrder: wrong version number for order " + newOrder.getOrdId() +
                    ": expected " + order.getOrderVersion() + " and got " + newOrder.getOrderVersion(), 0);
               throw new OMOrderValidationException("wrongVersion", order, order.getOrdId(), IName.Order.VERSION, newOrder.getOrderVersion());
     public Order getOrder()
          throws EJBException, RemoteException
return ((Order)order.clone());
The following transactions exists for the entity bean ...
Required:
     create and setOrder methods
Not Supported
     findByPrimary and getOrder methods

"The entity bean has a "void setOrder(Order param)" function that writes the Order to a database"
This functionality should be performed in the ejbStore method().
"a "Order getOrder()" function that clones and returns the internal Order object."
Sounds reasonable, except for the cloning part.
"The "ejbLoad()" function reads the Order object from the database"
Cool.
""ejbStore()" function is not implemented."
Whoops. Looks like your setOrder method is doing too much. It should do the inverse of getOrder (namely, setting the interal Order object), nothing more. Defer the persistence code to the ejbStore method.
"According to the SilverStream manual it does not maintain a pool of idle/unused entity beans, instead it instantiates beans as requested."
Manual? What's that? Assuming that is correct, better hope you don't ever get a high load. You might wanna look into JBoss.
"2) We sometimes get a TransactionRequired exception thrown when we have concurrent updates to two different objects of the entity bean."
How can you have concurrent access to two different objects?? Concurrency is inherently applicable to only one object.
In summary:
Write your beans properly, ejbLoad populates the bean with data, ejbStore persists the bean's data.
Get a better (and possibly free) appserver.

[Solved] Display current version of component being updated?

Similar Messages

Maybe you are looking for