[SOLVED] Does yaourt save built packages anywhere?

Hi everybody. I'll put it as simple as I can.
I've downloaded, built and installed several packages from AUR with yaourt. Now I'm uninstalling some packages and programs I don't really need, and between them some of via-yaourt-built ones. But since some of them really took some time to be built, I would like to keep them if I want to install them again later. The problem is that they're not in /var/cache/pacman/pkg nor in other directories in my ~/ folder, and I don't know where else to look. Looking in the wiki and searching the bbs gave me no result. Can somebody please tell me where yaourt saves the packages it builds, if it saves them anywhere at all? [but it would be Very dull if it didn't]
Thanks everybody!
Last edited by olorian (2011-12-24 13:38:33)

Thank you for your fast answer!
I did read both, yaourtrc, yaourtrc.5 and yaourt.8, and I found out about exporting possibility in the first place. Let me ask for confirmation: does all of it imply that, since my yaourtrc reads
#EXPORT=0
#EXPORTSRC=0
#EXPORTDIR=""
and my makepkg.conf
#PKGDEST=/home/packages
#SRCDEST=/home/sources
#SRCPKGDEST=/home/srcpackages
thus all of the variables are commented, I have no choice but using bacman to have the .xz packages of the programs I previously built?
As to say it so, I should have known before, should I? -D
This bacman looks like exactly what I would need in this situation however - I'm using it right now to repackage the binaries - thank you!
Last edited by olorian (2011-12-24 12:37:08)

Similar Messages

  • HELP!  I saved a document.  Copied the document.  Went to delete some extra characters.  Accidentally deleted the entire document.  Now I can't find my document.  When I open the saved document, the page is blank.  Does Pages save copied text anywhere?

    I saved a document.  Copied the document.  Went to delete some extra characters and accidentally deleted the text of the entire document.  I did not save a blank page.  I cannot recover the lost text.  Please Help.  I'm NEW to Pages. 

    Hi Jan,
    Copied text (or other copied material) is on the Clipboard, but only until you copy something else or log out of your account. If you act before doing another copy, you can paste the copied material back into the document. If you don't act right away, you may still have a path back.
    One of the most useful keystroke combinations on the Mac is the "Oops! key," as a friend of mine once named it. That's command-Z, also known as "Undo". In some applications it will let you undo only a single step, but in others, including Pages, you can do repeated undos, so it's not quite so essential that you act immediately on making an error. Undo, done via the Oops! key, or via the Edit menu takes you back one change at a time. You can't skip any steps, so to get back to the state before the accidental deletion, you'll have to undo any work you've done since then. The memory of what to Undo disappears when you close the document or quit the application.
    At that point you're at the mercy of your backup plan. If you've had Time Machine running, you'll be able to enter Time Machine and go back to an earlier, saved version of the file.
    All these are in addition to the steps Ian suggested above.
    Regards,
    Barry
    PS: Best piece of advice I can give a new Pages user (beyond Backup early and often) is to download and read through the first few chapters of the Pages '09 User Guide, available through the Help menu in Pages '09. Mostly pretty easy reading, and will get you through the basics without much trouble.
    B

  • [solved] Where does yaourt store packages it creates from AUR ?

    Hi !
    Using yaourt for AUR access, pretty happy with it, too (most features & fast enough for me).
    Now when I install something from the AUR, I'd like to keep a backup copy of the package (handy especially for some git / svn packages that do not always build). This leads to the question, where does yaourt store the packages before installing (should be able to grab a copy then ...) ? Or does yaourt itself keep a backup copy somewhere, like pacman does ?
    Thanks, A.
    Last edited by axel668 (2010-05-20 18:05:19)

    Please don't do that; that is what the wiki is for. https://wiki.archlinux.org/index.php/Fo … Bumping.27
    Closing

  • "You don't have permission to save in this location." Cannot save any files anywhere. All permissions open, all other browsers save OK in same place. Why?

    I cannot save any files anywhere. I always get the message "You don't have permission to save in this location. Contact the administrator to obtain permission. Would you like to save in the {} folder instead?"
    I have created a clean profile in Profile Manager, and used the Reset Firefox tool. The only way I can save files is to use another browser. IE and Chrome have no problems saving files to the exact same folders.
    This seemed to have started with the last update on 10/5/2013.

    Maybe something changed in the program shortcut you use to start Firefox. Can you check right-click > Properties > Compatbility tab and make sure nothing is selected there?
    ''I've never tried this myself, but the forum has a standard set of steps for a "clean reinstall" of Firefox to replace damaged program files. During this process, you are not removing personal settings, but you are removing some shared add-on folders, which would affect Windows Media Player and perhaps other plugins/extensions installed that way.''
    Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete (or if you're nervous, move or rename) the Firefox program folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox (32-bit)
    #**C:\Program Files (x86)\Mozilla Firefox (64-bit)
    #*'''Mac:''' Delete Firefox from the Applications folder.
    #*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
    #Now, go ahead and reinstall Firefox:
    ##Double-click the downloaded installation file and go through the steps of the installation wizard.
    ##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    Does that help?

  • [SOLVED] Strange error while compiling packages via AUR

    I've been facing this error while compiling packages via AUR. I'm also posting the output of my /etc/makepkg.conf
    Error
    ==> Starting build()...
    checking for a BSD-compatible install... /bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... /bin/mkdir -p
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking whether cc supports -O2... yes
    checking for g++... g++
    checking whether the C++ compiler works... yes
    checking for C++ compiler default output file name... a.out
    checking for suffix of executables...
    checking whether we are cross compiling... no
    checking for suffix of object files... o
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking for style of include used by make... GNU
    checking dependency style of g++... gcc3
    checking for gcc... gcc
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking dependency style of gcc... gcc3
    checking for pkg-config... /usr/bin/pkg-config
    checking pkg-config is at least version 0.9.0... yes
    checking for GSTREAMER... yes
    checking for GSTREAMER_GTK... yes
    checking for XOpenDisplay in -lX11... yes
    checking for ncursesw5-config... /usr/bin/ncursesw5-config
    checking for initscr in -lncurses... yes
    checking whether gcc supports -Wall... yes
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating src/Makefile
    config.status: creating docs/Makefile
    config.status: creating config.h
    config.status: executing depfiles commands
    fatal: Not a git repository (or any of the parent directories): .git
    CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /tmp/yaourt-tmp-hellknight/aur-gst123/src/gst123-0.2.0/build-aux/missing --run aclocal-1.11 -Wno-portability
    sh: autom4te: command not found
    aclocal-1.11: autom4te failed with exit status: 127
    make: *** [aclocal.m4] Error 1
    ==> ERROR: A failure occurred in build().
    Aborting...
    ==> ERROR: Makepkg was unable to build gst123.
    ==> Restart building gst123 ? [y/N]
    ==> -------------------------------
    ==>
    /etc/makepkg.conf
    # /etc/makepkg.conf
    # SOURCE ACQUISITION
    #-- The download utilities that makepkg should use to acquire sources
    # Format: 'protocol::agent'
    DLAGENTS=('ftp::/usr/bin/wget -c --passive-ftp -t 3 --waitretry=3 -O %o %u'
    'http::/usr/bin/wget -c -t 3 --waitretry=3 -O %o %u'
    'https::/usr/bin/wget -c -t 3 --waitretry=3 --no-check-certificate -O %o %u'
    'rsync::/usr/bin/rsync -z %u %o'
    'scp::/usr/bin/scp -C %u %o')
    # Other common tools:
    # /usr/bin/snarf
    # /usr/bin/lftpget -c
    # /usr/bin/curl
    # ARCHITECTURE, COMPILE FLAGS
    CARCH="x86_64"
    CHOST="x86_64-unknown-linux-gnu"
    #-- Exclusive: will only run on x86_64
    # -march (or -mcpu) builds exclusively for an architecture
    # -mtune optimizes for an architecture, but builds for whole processor family
    CFLAGS="-march=amdfam10 -mtune=generic -O2 -pipe"
    CXXFLAGS="${CFLAGS}"
    LDFLAGS="-Wl,--hash-style=gnu -Wl,--as-needed"
    #-- Make Flags: change this for DistCC/SMP systems
    MAKEFLAGS="-j8"
    # BUILD ENVIRONMENT
    # Defaults: BUILDENV=(fakeroot !distcc color !ccache)
    # A negated environment option will do the opposite of the comments below.
    #-- fakeroot: Allow building packages as a non-root user
    #-- distcc: Use the Distributed C/C++/ObjC compiler
    #-- color: Colorize output messages
    #-- ccache: Use ccache to cache compilation
    BUILDENV=(fakeroot !distcc color !ccache)
    #-- If using DistCC, your MAKEFLAGS will also need modification. In addition,
    #-- specify a space-delimited list of hosts running in the DistCC cluster.
    #DISTCC_HOSTS=""
    # GLOBAL PACKAGE OPTIONS
    # These are default values for the options=() settings
    # Default: OPTIONS=(strip docs libtool emptydirs zipman purge)
    # A negated option will do the opposite of the comments below.
    #-- strip: Strip symbols from binaries/libraries in STRIP_DIRS
    #-- docs: Save doc directories specified by DOC_DIRS
    #-- libtool: Leave libtool (.la) files in packages
    #-- emptydirs: Leave empty directories in packages
    #-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip
    #-- purge: Remove files specified by PURGE_TARGETS
    OPTIONS=(strip docs libtool emptydirs zipman purge)
    #-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512
    INTEGRITY_CHECK=(md5)
    #-- Options to be used when stripping binaries. See `man strip' for details.
    STRIP_BINARIES="--strip-all"
    #-- Options to be used when stripping shared libraries. See `man strip' for details.
    STRIP_SHARED="--strip-unneeded"
    #-- Options to be used when stripping static libraries. See `man strip' for details.
    STRIP_STATIC="--strip-debug"
    #-- Manual (man and info) directories to compress (if zipman is specified)
    MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info})
    #-- Doc directories to remove (if !docs is specified)
    DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc})
    #-- Directories to be searched for the strip option (if strip is specified)
    STRIP_DIRS=(bin lib sbin usr/{bin,lib,sbin,local/{bin,lib,sbin}} opt/*/{bin,lib,sbin})
    #-- Files to be removed from all packages (if purge is specified)
    PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod)
    # PACKAGE OUTPUT
    # Default: put built package and cached source in build directory
    #-- Destination: specify a fixed directory where all packages will be placed
    #PKGDEST=/home/packages
    #-- Source cache: specify a fixed directory where source files will be cached
    #SRCDEST=/home/sources
    #-- Source packages: specify a fixed directory where all src packages will be placed
    #SRCPKGDEST=/home/srcpackages
    #-- Packager: name/email of the person or organization building packages
    #PACKAGER="John Doe <[email protected]>"
    # EXTENSION DEFAULTS
    # WARNING: Do NOT modify these variables unless you know what you are
    # doing.
    PKGEXT='.pkg.tar.xz'
    SRCEXT='.src.tar.gz'
    # vim: set ft=sh ts=2 sw=2 et:
    Last edited by tarun.hellknight (2011-04-12 15:45:26)

    That's strange... it wasn't installed.. although I had never,ever faced a problem while compiling packages via AUR.. maybe, I should be careful when uninstalling orphans.. thanks for the help..

  • Where does iPhoto save imported files????  how do you "save"?

    ok this is driving me crazy:
    I've imported photos and movie clips from my camera through usb through iPhoto.
    Where does iPhoto save these files?
    I've opened iMovie to find the movie clip and I can't find it anywhere...
    also: after editing a photo in iMovie, how do you "save" it?

    Chris
    You’ve a bit of a learning curve ahead of you as you obviously haven’t really understood iPhoto, what it is and how it works. You could do yourself a favour and have a look at the tutorials at http://www.apple.com/ilife/tutorials/#iphoto
    To specific cases:
    When you press "done" it doesn't save it (find the photo in its original file and open it with Preview, you'll see it hasn't been saved).
    Yes, but it has! You see iPhoto will always preserve your Original file. So when you make edits it carries out these on copy of the file. You can see this in the iPhoto Window. There is no way to make iPhoto edit the original file.
    I have opted for iPhoto not to duplicate my photos and keep its own library (to me that doesn't make any sense, my photos are about 15GB, I wouldn't want them to turn into 30GB for no reason!),
    1. The best solution for that it to allow iPhoto to copy the files into the Library and then remove your own copies.
    2. When you go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import', you are running what is called a Referenced Library. In a Referenced Library iPhoto will not copy the files on import, but rather simply reference them on your HD. To do this
    it will create an alias in the Originals Folder that points to your file.
    It will still create a thumbnail and,
    if you modify the pics, a Modified version within the iPhoto Library Folder.
    However, you need to be aware of a number of potential pitfalls using this system.
    1. Importing and deleting pics are more complex procedures
    2. You cannot move or rename the files on your system or iPhoto will lose track of them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
    3. Most importantly, migrating to a new disk or computer can be much more complex.
    Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers.
    If disk space is an issue, you can run an entire iPhoto Library from an external disk:
    1. Quit iPhoto
    2. Copy the iPhoto Library as an entity from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    If you're concerned about accessing the files, there are many, many ways to access your files in iPhoto:
    *For Users of 10.5 Only*
    You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
    Uploaded with plasq's Skitch!
    You can access the Library from the New Message Window in Mail:
    Uploaded with plasq's Skitch!
    *For users of 10.4 and 10.5* ...
    Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
    To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
    This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
    If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    *If you want to access the files with iPhoto not running*:
    Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
    Other options include:
    1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
    2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
    3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
    so the problem still exists, why doesn't it save new photos in my pictures folder?
    Because you told it not to. When you run a Referenced Library +you are responsible for File Management+. Remember that bit above where I said
    1. Importing and deleting pics are more complex procedures
    You need to put the files where you want them, then import them to iPhoto. Iphoto has no control over any file outside the Library Package. So when it comes to deleting things you’ll need to remove the pics from iPhoto and then go and root them out from your folder structure by hand.
    None of this is the case if you run a Managed Library.
    or ask me where to save them?
    Because that’s not what it does. Check out Image Capture for that.
    I'm worried that if I now let it save all my new photos to its iPhoto library (which is basically a virtual library as I understand it)
    What do you mean by a “virtual library”?
    and in a year's time I change laptops I run the risk of loosing photos as I won't know which photos are were (now I can do a back up to an external drive simply by copying the folders I choose from the pictures folder.
    If you run a Managed Library then backing up and migrating are both very simple. You simply back up the iPhoto Library or move it as the case may be. There are many, many back up utilities that will do incremental back ups if the Library: Time Machine, DejaVu Chronosync are several but there are a hundred more. Search on MacUpdate.
    If you run a Referenced Library you must +back up the Originals and the iPhoto Library+ (to get your Albums, Modified Versions and so on). Migrating rto a new machine is a bear too, as you cannot allow the path to the files to alter. (See my pitfall no. 3 above.
    Worst of all: a mixed Managed/Referenced Library: a recipe for data loss.
    My strongest advice to you is to start over with iPhoto. Create a new Library: Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library' and import 100 pics into it and explore it for a week or two. Get to know the ins and outs a bit and se how it works. Then decide if it’s the right app for you. By all means post back if you need more info.
    Regards
    TD

  • [solved] Makepkg fails to sign package w/o asking password.

    I'm not sure when exactly this issue really started happening, but it was somewhere around the time that the new versions of Pacman and gnupg came out (a few weeks).
    I have a local ~/.makepkg.conf configured to sign any package I build with my key. The issue is that once any package completes building, and it is ready to be signed, I will sometimes be presented with a Pinentry screen to enter my password for signing the package and sometimes it will just fail to sign the package without ever asking for my password. There is no indication as to why it failed in the terminal output nor in the journal.
    This is happening on both of my Arch systems, so I know it's not just a localized issue with my one computer.
    Linux Betelgeuse 3.18.2-2-ARCH #1 SMP PREEMPT Fri Jan 9 07:37:51 CET 2015 x86_64 GNU/Linux
    Pacman, gnupg, and pinentry versions:
    [gilmoreja@Betelgeuse lib32-allegro]$ pacman -Qi pacman gnupg pinentry
    Name : pacman
    Version : 4.2.0-6
    Description : A library-based package manager with dependency support
    Architecture : x86_64
    URL : http://www.archlinux.org/pacman/
    Licenses : GPL
    Groups : base base-devel
    Provides : pacman-contrib
    Depends On : bash glibc libarchive>=3.1.2 curl>=7.39.0 gpgme pacman-mirrorlist
    archlinux-keyring
    Optional Deps : None
    Required By : cower pkgfile
    Optional For : None
    Conflicts With : pacman-contrib
    Replaces : pacman-contrib
    Installed Size : 4.22 MiB
    Packager : Allan McRae <[email protected]>
    Build Date : Sun 11 Jan 2015 11:44:40 PM CST
    Install Date : Mon 26 Jan 2015 07:13:41 AM CST
    Install Reason : Explicitly installed
    Install Script : No
    Validated By : Signature
    Name : gnupg
    Version : 2.1.1-1
    Description : Complete and free implementation of the OpenPGP standard
    Architecture : x86_64
    URL : http://www.gnupg.org/
    Licenses : GPL
    Groups : None
    Provides : dirmngr gnupg2=2.1.1
    Depends On : npth libgpg-error libgcrypt libksba libassuan pinentry bzip2 readline
    gnutls
    Optional Deps : libldap: gpg2keys_ldap [installed]
    libusb-compat: scdaemon [installed]
    Required By : gpgme
    Optional For : None
    Conflicts With : dirmngr gnupg2
    Replaces : dirmngr gnupg2
    Installed Size : 8.32 MiB
    Packager : Gaetan Bisson <[email protected]>
    Build Date : Tue 16 Dec 2014 01:39:55 PM CST
    Install Date : Wed 24 Dec 2014 06:17:22 PM CST
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Validated By : Signature
    Name : pinentry
    Version : 0.9.0-1
    Description : a collection of simple PIN or passphrase entry dialogs which utilize the Assuan
    protocol
    Architecture : x86_64
    URL : http://gnupg.org/related_software/pinentry/
    Licenses : GPL
    Groups : None
    Provides : None
    Depends On : ncurses libcap>=2.16
    Optional Deps : gtk2: for gtk2 backend [installed]
    qt4: for qt4 backend [installed]
    Required By : gnupg
    Optional For : None
    Conflicts With : None
    Replaces : None
    Installed Size : 329.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Wed 12 Nov 2014 05:43:08 AM CST
    Install Date : Wed 24 Dec 2014 06:17:21 PM CST
    Install Reason : Installed as a dependency for another package
    Install Script : Yes
    Validated By : Signature
    makepkg output:
    ==> Tidying install...
    -> Purging unwanted files...
    -> Removing libtool files...
    -> Removing static library files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package "lib32-allegro"...
    -> Generating .PKGINFO file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Signing package...
    ==> WARNING: Failed to sign package file.
    ==> Leaving fakeroot environment.
    ==> Finished making: lib32-allegro 5.0.11-1 (Mon Jan 26 08:00:43 CST 2015)
    ==> Installing package lib32-allegro with pacman -U...
    Password:
    loading packages...
    error: '/home/gilmoreja/sources/lib32-allegro/lib32-allegro-5.0.11-1-x86_64.pkg.tar.xz': package missing required signature
    ==> WARNING: Failed to install built package(s).
    ==> Cleaning up...
    Current boot's journal:
    -- Logs begin at Wed 2014-12-24 18:48:34 CST, end at Mon 2015-01-26 08:02:04 CST. --
    Jan 26 07:01:14 Betelgeuse systemd-journal[106]: Runtime journal is using 6.2M (max allowed 49.8M, trying to leave 74.8M free of 492.6M available → current limit 49.8M).
    Jan 26 07:01:14 Betelgeuse systemd-journal[106]: Permanent journal is using 272.0M (max allowed 1.9G, trying to leave 2.9G free of 8.8G available → current limit 1.9G).
    Jan 26 07:01:16 Betelgeuse systemd-journal[106]: Time spent on flushing to /var is 1.569419s for 2 entries.
    Jan 26 07:01:16 Betelgeuse kernel: Initializing cgroup subsys cpuset
    Jan 26 07:01:16 Betelgeuse kernel: Initializing cgroup subsys cpu
    Jan 26 07:01:16 Betelgeuse kernel: Initializing cgroup subsys cpuacct
    Jan 26 07:01:16 Betelgeuse kernel: Linux version 3.18.2-2-ARCH (builduser@tobias) (gcc version 4.9.2 20141224 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Jan 9 07:37:51 CET 2015
    Jan 26 07:01:16 Betelgeuse kernel: Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9fba7516-1115-4d75-a604-841e18996568 rw
    Jan 26 07:01:16 Betelgeuse kernel: tseg: 0000000000
    Jan 26 07:01:16 Betelgeuse kernel: e820: BIOS-provided physical RAM map:
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x0000000000100000-0x000000003ffcffff] usable
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x000000003ffd0000-0x000000003ffdefff] ACPI data
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x000000003ffdf000-0x000000003fffffff] ACPI NVS
    Jan 26 07:01:16 Betelgeuse kernel: BIOS-e820: [mem 0x00000000fff80000-0x00000000ffffffff] reserved
    Jan 26 07:01:16 Betelgeuse kernel: NX (Execute Disable) protection: active
    Jan 26 07:01:16 Betelgeuse kernel: SMBIOS 2.3 present.
    Jan 26 07:01:16 Betelgeuse kernel: DMI: Magnell / , BIOS 1.04 01/21/2005
    Jan 26 07:01:17 Betelgeuse kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Jan 26 07:01:17 Betelgeuse kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00:00: AGP bridge
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe1ffffff] (old size 32MB)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe7ffffff] (128MB, APSIZE 0xf20)
    Jan 26 07:01:17 Betelgeuse kernel: e820: last_pfn = 0x3ffd0 max_arch_pfn = 0x400000000
    Jan 26 07:01:17 Betelgeuse kernel: MTRR default type: uncachable
    Jan 26 07:01:17 Betelgeuse kernel: MTRR fixed ranges enabled:
    Jan 26 07:01:17 Betelgeuse kernel: 00000-9FFFF write-back
    Jan 26 07:01:17 Betelgeuse kernel: A0000-EFFFF uncachable
    Jan 26 07:01:17 Betelgeuse kernel: F0000-FFFFF write-protect
    Jan 26 07:01:17 Betelgeuse kernel: MTRR variable ranges enabled:
    Jan 26 07:01:17 Betelgeuse kernel: 0 base 0000000000 mask FFC0000000 write-back
    Jan 26 07:01:17 Betelgeuse kernel: 1 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 2 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 3 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 4 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 5 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 6 disabled
    Jan 26 07:01:17 Betelgeuse kernel: 7 disabled
    Jan 26 07:01:17 Betelgeuse kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Jan 26 07:01:17 Betelgeuse kernel: found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
    Jan 26 07:01:17 Betelgeuse kernel: Scanning 1 areas for low memory corruption
    Jan 26 07:01:17 Betelgeuse kernel: Base memory trampoline at [ffff880000099000] 99000 size 24576
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x00000000-0x000fffff] page 4k
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b36000, 0x01b36fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b37000, 0x01b37fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b38000, 0x01b38fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x3fc00000-0x3fdfffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x3fc00000-0x3fdfffff] page 2M
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x3c000000-0x3fbfffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x3c000000-0x3fbfffff] page 2M
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x00100000-0x3bffffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x00100000-0x001fffff] page 4k
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x00200000-0x3bffffff] page 2M
    Jan 26 07:01:17 Betelgeuse kernel: init_memory_mapping: [mem 0x3fe00000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: [mem 0x3fe00000-0x3ffcffff] page 4k
    Jan 26 07:01:17 Betelgeuse kernel: BRK [0x01b39000, 0x01b39fff] PGTABLE
    Jan 26 07:01:17 Betelgeuse kernel: RAMDISK: [mem 0x373b4000-0x379d1fff]
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Early table checksum verification disabled
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: RSDP 0x00000000000F7090 000014 (v00 ACPIAM)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: RSDT 0x000000003FFD0000 000030 (v01 A M I OEMRSDT 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: FACP 0x000000003FFD0200 000081 (v02 A M I OEMFACP 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: DSDT 0x000000003FFD03F0 003A1B (v01 258KA 258KA000 00000000 INTL 02002026)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: FACS 0x000000003FFDF000 000040
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: APIC 0x000000003FFD0390 000054 (v01 A M I OEMAPIC 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: OEMB 0x000000003FFDF040 000108 (v01 A M I AMI_OEM 01000521 MSFT 00000097)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Local APIC address 0xfee00000
    Jan 26 07:01:17 Betelgeuse kernel: Scanning NUMA topology in Northbridge 24
    Jan 26 07:01:17 Betelgeuse kernel: No NUMA configuration found
    Jan 26 07:01:17 Betelgeuse kernel: Faking a node at [mem 0x0000000000000000-0x000000003ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: NODE_DATA(0) allocated [mem 0x3ffcc000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: [ffffea0000000000-ffffea0000ffffff] PMD -> [ffff88003e600000-ffff88003f5fffff] on node 0
    Jan 26 07:01:17 Betelgeuse kernel: Zone ranges:
    Jan 26 07:01:17 Betelgeuse kernel: DMA [mem 0x00001000-0x00ffffff]
    Jan 26 07:01:17 Betelgeuse kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: Normal empty
    Jan 26 07:01:17 Betelgeuse kernel: Movable zone start for each node
    Jan 26 07:01:17 Betelgeuse kernel: Early memory node ranges
    Jan 26 07:01:17 Betelgeuse kernel: node 0: [mem 0x00001000-0x0009efff]
    Jan 26 07:01:17 Betelgeuse kernel: node 0: [mem 0x00100000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: Initmem setup node 0 [mem 0x00001000-0x3ffcffff]
    Jan 26 07:01:17 Betelgeuse kernel: On node 0 totalpages: 261998
    Jan 26 07:01:17 Betelgeuse kernel: DMA zone: 64 pages used for memmap
    Jan 26 07:01:17 Betelgeuse kernel: DMA zone: 21 pages reserved
    Jan 26 07:01:17 Betelgeuse kernel: DMA zone: 3998 pages, LIFO batch:0
    Jan 26 07:01:17 Betelgeuse kernel: DMA32 zone: 4032 pages used for memmap
    Jan 26 07:01:17 Betelgeuse kernel: DMA32 zone: 258000 pages, LIFO batch:31
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PM-Timer IO Port: 0x808
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Local APIC address 0xfee00000
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    Jan 26 07:01:17 Betelgeuse kernel: IOAPIC[0]: apic_id 1, version 2, address 0xfec00000, GSI 0-23
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: IRQ0 used by override.
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: IRQ10 used by override.
    Jan 26 07:01:17 Betelgeuse kernel: Using ACPI (MADT) for SMP configuration information
    Jan 26 07:01:17 Betelgeuse kernel: smpboot: Allowing 1 CPUs, 0 hotplug CPUs
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    Jan 26 07:01:17 Betelgeuse kernel: e820: [mem 0x40000000-0xfff7ffff] available for PCI devices
    Jan 26 07:01:17 Betelgeuse kernel: Booting paravirtualized kernel on bare hardware
    Jan 26 07:01:17 Betelgeuse kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:1 nr_node_ids:1
    Jan 26 07:01:17 Betelgeuse kernel: PERCPU: Embedded 30 pages/cpu @ffff88003fc00000 s82880 r8192 d31808 u2097152
    Jan 26 07:01:17 Betelgeuse kernel: pcpu-alloc: s82880 r8192 d31808 u2097152 alloc=1*2097152
    Jan 26 07:01:17 Betelgeuse kernel: pcpu-alloc: [0] 0
    Jan 26 07:01:17 Betelgeuse kernel: Built 1 zonelists in Node order, mobility grouping on. Total pages: 257881
    Jan 26 07:01:17 Betelgeuse kernel: Policy zone: DMA32
    Jan 26 07:01:17 Betelgeuse kernel: Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9fba7516-1115-4d75-a604-841e18996568 rw
    Jan 26 07:01:17 Betelgeuse kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: Checking aperture...
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00:00: AGP bridge
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe1ffffff] (old size 32MB)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: pci 0000:00:00.0: AGP aperture [bus addr 0xe0000000-0xe7ffffff] (128MB, APSIZE 0xf20)
    Jan 26 07:01:17 Betelgeuse kernel: AGP: Node 0: aperture [bus addr 0xe0000000-0xe7ffffff] (128MB)
    Jan 26 07:01:17 Betelgeuse kernel: Memory: 1013368K/1047992K available (5478K kernel code, 908K rwdata, 1720K rodata, 1160K init, 1184K bss, 34624K reserved)
    Jan 26 07:01:17 Betelgeuse kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Jan 26 07:01:17 Betelgeuse kernel: Preemptible hierarchical RCU implementation.
    Jan 26 07:01:17 Betelgeuse kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 26 07:01:17 Betelgeuse kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 26 07:01:17 Betelgeuse kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=1.
    Jan 26 07:01:17 Betelgeuse kernel: RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
    Jan 26 07:01:17 Betelgeuse kernel: NR_IRQS:8448 nr_irqs:256 0
    Jan 26 07:01:17 Betelgeuse kernel: spurious 8259A interrupt: IRQ7.
    Jan 26 07:01:17 Betelgeuse kernel: Console: colour dummy device 80x25
    Jan 26 07:01:17 Betelgeuse kernel: console [tty0] enabled
    Jan 26 07:01:17 Betelgeuse kernel: allocated 4194304 bytes of page_cgroup
    Jan 26 07:01:17 Betelgeuse kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 26 07:01:17 Betelgeuse kernel: tsc: Fast TSC calibration using PIT
    Jan 26 07:01:17 Betelgeuse kernel: tsc: Detected 798.222 MHz processor
    Jan 26 07:01:17 Betelgeuse kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 1597.96 BogoMIPS (lpj=2660740)
    Jan 26 07:01:17 Betelgeuse kernel: pid_max: default: 32768 minimum: 301
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Core revision 20140926
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: All ACPI Tables successfully acquired
    Jan 26 07:01:17 Betelgeuse kernel: Security Framework initialized
    Jan 26 07:01:17 Betelgeuse kernel: Yama: becoming mindful.
    Jan 26 07:01:17 Betelgeuse kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys memory
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys devices
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys freezer
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys net_cls
    Jan 26 07:01:17 Betelgeuse kernel: Initializing cgroup subsys blkio
    Jan 26 07:01:17 Betelgeuse kernel: mce: CPU supports 5 MCE banks
    Jan 26 07:01:17 Betelgeuse kernel: Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
    Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0
    Jan 26 07:01:17 Betelgeuse kernel: Freeing SMP alternatives memory: 20K (ffffffff81a07000 - ffffffff81a0c000)
    Jan 26 07:01:17 Betelgeuse kernel: ftrace: allocating 20920 entries in 82 pages
    Jan 26 07:01:17 Betelgeuse kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    Jan 26 07:01:17 Betelgeuse kernel: smpboot: CPU0: AMD Athlon(tm) 64 Processor 3400+ (fam: 0f, model: 04, stepping: 0a)
    Jan 26 07:01:17 Betelgeuse kernel: Performance Events: AMD PMU driver.
    Jan 26 07:01:17 Betelgeuse kernel: ... version: 0
    Jan 26 07:01:17 Betelgeuse kernel: ... bit width: 48
    Jan 26 07:01:17 Betelgeuse kernel: ... generic registers: 4
    Jan 26 07:01:17 Betelgeuse kernel: ... value mask: 0000ffffffffffff
    Jan 26 07:01:17 Betelgeuse kernel: ... max period: 00007fffffffffff
    Jan 26 07:01:17 Betelgeuse kernel: ... fixed-purpose events: 0
    Jan 26 07:01:17 Betelgeuse kernel: ... event mask: 000000000000000f
    Jan 26 07:01:17 Betelgeuse kernel: NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    Jan 26 07:01:17 Betelgeuse kernel: x86: Booted up 1 node, 1 CPUs
    Jan 26 07:01:17 Betelgeuse kernel: smpboot: Total of 1 processors activated (1597.96 BogoMIPS)
    Jan 26 07:01:17 Betelgeuse kernel: devtmpfs: initialized
    Jan 26 07:01:17 Betelgeuse kernel: PM: Registering ACPI NVS region [mem 0x3ffdf000-0x3fffffff] (135168 bytes)
    Jan 26 07:01:17 Betelgeuse kernel: pinctrl core: initialized pinctrl subsystem
    Jan 26 07:01:17 Betelgeuse kernel: RTC time: 13:01:08, date: 01/26/15
    Jan 26 07:01:17 Betelgeuse kernel: NET: Registered protocol family 16
    Jan 26 07:01:17 Betelgeuse kernel: cpuidle: using governor ladder
    Jan 26 07:01:17 Betelgeuse kernel: cpuidle: using governor menu
    Jan 26 07:01:17 Betelgeuse kernel: node 0 link 0: io port [1000, ffffff]
    Jan 26 07:01:17 Betelgeuse kernel: TOM: 0000000040000000 aka 1024M
    Jan 26 07:01:17 Betelgeuse kernel: node 0 link 0: mmio [a0000, bffff]
    Jan 26 07:01:17 Betelgeuse kernel: node 0 link 0: mmio [40000000, ffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: bus: [bus 00-ff] on node 0 link 0
    Jan 26 07:01:17 Betelgeuse kernel: bus: 00 [io 0x0000-0xffff]
    Jan 26 07:01:17 Betelgeuse kernel: bus: 00 [mem 0x000a0000-0x000bffff]
    Jan 26 07:01:17 Betelgeuse kernel: bus: 00 [mem 0x40000000-0xfcffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: bus type PCI registered
    Jan 26 07:01:17 Betelgeuse kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jan 26 07:01:17 Betelgeuse kernel: PCI: Using configuration type 1 for base access
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(Module Device)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(Processor Device)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Executed 1 blocks of module-level executable AML code
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Actual Package length (202) is larger than NumElements field (4), truncated
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Interpreter enabled
    Jan 26 07:01:17 Betelgeuse kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: (supports S0 S3 S4 S5)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 26 07:01:17 Betelgeuse kernel: PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
    Jan 26 07:01:17 Betelgeuse kernel: [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffffffff] (ignored)
    Jan 26 07:01:17 Betelgeuse kernel: PCI: root bus 00: hardware-probed resources
    Jan 26 07:01:17 Betelgeuse kernel: acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
    Jan 26 07:01:17 Betelgeuse kernel: PCI host bridge to bus 0000:00
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: root bus resource [mem 0x40000000-0xfcffffffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:00.0: [1039:0755] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:00.0: reg 0x10: [mem 0xe0000000-0xe7ffffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: [1039:0002] type 01 class 0x060400
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.0: [1039:0008] type 00 class 0x060100
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.0: Enabling SiS 96x SMBus
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.1: reg 0x20: [io 0x0c00-0x0c1f]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: [1039:5513] type 00 class 0x010180
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: reg 0x20: [io 0xffa0-0xffaf]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x14: [io 0x03f6]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.5: legacy IDE quirk: reg 0x1c: [io 0x0376]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: [1039:7013] type 00 class 0x070300
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: reg 0x10: [io 0xe400-0xe4ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: reg 0x14: [io 0xe000-0xe07f]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: PME# supported from D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.6: System wakeup disabled by ACPI
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: [1039:7012] type 00 class 0x040100
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: reg 0x10: [io 0xe800-0xe8ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: reg 0x14: [io 0xec00-0xec7f]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: PME# supported from D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:02.7: System wakeup disabled by ACPI
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.0: reg 0x10: [mem 0xdfffd000-0xdfffdfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.1: reg 0x10: [mem 0xdfffe000-0xdfffefff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.3: reg 0x10: [mem 0xdffff000-0xdfffffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: [1039:0900] type 00 class 0x020000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: reg 0x10: [io 0xd800-0xd8ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: reg 0x14: [mem 0xdfffc000-0xdfffcfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: reg 0x30: [mem 0xdffc0000-0xdffdffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:04.0: System wakeup disabled by ACPI
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: [104c:8023] type 00 class 0x0c0010
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: reg 0x10: [mem 0xdfffb800-0xdfffbfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: reg 0x14: [mem 0xdfff4000-0xdfff7fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: [1217:7114] type 02 class 0x060700
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: reg 0x10: [mem 0x00000000-0x00000fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: [1217:7114] type 02 class 0x060700
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: reg 0x10: [mem 0x00000000-0x00000fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: [1217:7110] type 00 class 0x088000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: reg 0x10: [mem 0xdfffa000-0xdfffafff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:0b.0: [1814:0201] type 00 class 0x028000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:0b.0: reg 0x10: [mem 0xdfff8000-0xdfff9fff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: [1002:4e50] type 00 class 0x030000
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xd7ffffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x14: [io 0xc800-0xc8ff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x18: [mem 0xdfef0000-0xdfefffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: reg 0x30: [mem 0xdfec0000-0xdfedffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:01:00.0: supports D1 D2
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xdfcfffff pref]
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.0: bridge configuration invalid ([bus 00-00]), reconfiguring
    Jan 26 07:01:17 Betelgeuse kernel: pci 0000:00:09.1: bridge configuration invalid ([bus 00-00]), reconfiguring
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 05
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 09
    Jan 26 07:01:17 Betelgeuse kernel: pci_bus 0000:00: on NUMA node 0
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 *11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 7 10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    Jan 26 07:01:17 Betelgeuse kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
    Jan 26 07:01:17 Betelgeuse kernel: ACPI : EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: loaded
    Jan 26 07:01:17 Betelgeuse kernel: vgaarb: bridge control possible 0000:01:00.0
    Jan 26 07:01:17 Betelgeuse kernel: PCI: Using ACPI for IRQ routing
    Jan 26 07:01:17 Betelgeuse kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 26 07:01:17 Betelgeuse kernel: e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
    Jan 26 07:01:17 Betelgeuse kernel: e820: reserve RAM buffer [mem 0x3ffd0000-0x3fffffff]
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: Initializing
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: domain hash size = 128
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 26 07:01:17 Betelgeuse kernel: NetLabel: unlabeled traffic allowed by default
    Jan 26 07:01:17 Betelgeuse kernel: Switched to clocksource refined-jiffies
    Jan 26 07:01:17 Betelgeuse kernel: pnp: PnP ACPI init
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP030b (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:02: Plug and Play ACPI device, IDs SYN0801 SYN0800 PNP0f13 (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:03: [dma 1]
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:03: Plug and Play ACPI device, IDs NSC6001 (active)
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:04: [dma 0 disabled]
    Jan 26 07:01:17 Betelgeuse kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0480-0x048f] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x04d0-0x04d1] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0800-0x087f] could not be reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0880-0x08ff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [io 0x0c00-0x0c1f] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [mem 0xfff80000-0xffffffff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [mem 0xffe80000-0xffefffff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 07:01:17 Betelgeuse kernel: system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
    Jan 26 07:01:17 Betelgeuse kernel: system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x000c0000-0x000d0fff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: [mem 0x00100000-0x3fffffff] could not be reserved
    Jan 26 07:01:18 Betelgeuse kernel: system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 26 07:01:18 Betelgeuse kernel: pnp: PnP ACPI: found 8 devices
    Jan 26 07:01:18 Betelgeuse kernel: Switched to clocksource acpi_pm
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 0: assigned [mem 0x40000000-0x40000fff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 15: assigned [mem 0x44000000-0x47ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 16: assigned [mem 0x48000000-0x4bffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 0: assigned [mem 0x4c000000-0x4c000fff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 15: assigned [mem 0x50000000-0x53ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 16: assigned [mem 0x54000000-0x57ffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 13: assigned [io 0x1000-0x10ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: BAR 14: assigned [io 0x1400-0x14ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 13: assigned [io 0x1800-0x18ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: BAR 14: assigned [io 0x1c00-0x1cff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xdfe00000-0xdfefffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:01.0: bridge window [mem 0xcfd00000-0xdfcfffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: CardBus bridge to [bus 02-05]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [io 0x1000-0x10ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [io 0x1400-0x14ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [mem 0x44000000-0x47ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.0: bridge window [mem 0x48000000-0x4bffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: CardBus bridge to [bus 06-09]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [io 0x1800-0x18ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [io 0x1c00-0x1cff]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [mem 0x50000000-0x53ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:00:09.1: bridge window [mem 0x54000000-0x57ffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:00: resource 6 [mem 0x40000000-0xfcffffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:01: resource 1 [mem 0xdfe00000-0xdfefffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:01: resource 2 [mem 0xcfd00000-0xdfcfffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x10ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 1 [io 0x1400-0x14ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 2 [mem 0x44000000-0x47ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:02: resource 3 [mem 0x48000000-0x4bffffff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 0 [io 0x1800-0x18ff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 1 [io 0x1c00-0x1cff]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 2 [mem 0x50000000-0x53ffffff pref]
    Jan 26 07:01:18 Betelgeuse kernel: pci_bus 0000:06: resource 3 [mem 0x54000000-0x57ffffff]
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 2
    Jan 26 07:01:18 Betelgeuse kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: TCP: Hash tables configured (established 8192 bind 8192)
    Jan 26 07:01:18 Betelgeuse kernel: TCP: reno registered
    Jan 26 07:01:18 Betelgeuse kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 1
    Jan 26 07:01:18 Betelgeuse kernel: pci 0000:01:00.0: Video device with shadowed ROM
    Jan 26 07:01:18 Betelgeuse kernel: PCI: CLS 64 bytes, default 64
    Jan 26 07:01:18 Betelgeuse kernel: Unpacking initramfs...
    Jan 26 07:01:18 Betelgeuse kernel: Freeing initrd memory: 6264K (ffff8800373b4000 - ffff8800379d2000)
    Jan 26 07:01:18 Betelgeuse kernel: microcode: AMD CPU family 0xf not supported
    Jan 26 07:01:18 Betelgeuse kernel: Scanning for low memory corruption every 60 seconds
    Jan 26 07:01:18 Betelgeuse kernel: futex hash table entries: 256 (order: 2, 16384 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: Initialise system trusted keyring
    Jan 26 07:01:18 Betelgeuse kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 26 07:01:18 Betelgeuse kernel: zpool: loaded
    Jan 26 07:01:18 Betelgeuse kernel: zbud: loaded
    Jan 26 07:01:18 Betelgeuse kernel: VFS: Disk quotas dquot_6.5.2
    Jan 26 07:01:18 Betelgeuse kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 26 07:01:18 Betelgeuse kernel: msgmni has been set to 1991
    Jan 26 07:01:18 Betelgeuse kernel: Key type big_key registered
    Jan 26 07:01:18 Betelgeuse kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 26 07:01:18 Betelgeuse kernel: io scheduler noop registered
    Jan 26 07:01:18 Betelgeuse kernel: io scheduler deadline registered
    Jan 26 07:01:18 Betelgeuse kernel: io scheduler cfq registered (default)
    Jan 26 07:01:18 Betelgeuse kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jan 26 07:01:18 Betelgeuse kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: mode is 1024x768x32, linelength=4096, pages=0
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: scrolling: redraw
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Jan 26 07:01:18 Betelgeuse kernel: vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90000200000, using 3072k, total 3072k
    Jan 26 07:01:18 Betelgeuse kernel: Console: switching to colour frame buffer device 128x48
    Jan 26 07:01:18 Betelgeuse kernel: fb0: VESA VGA frame buffer device
    Jan 26 07:01:18 Betelgeuse kernel: GHES: HEST is not enabled!
    Jan 26 07:01:18 Betelgeuse kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 26 07:01:18 Betelgeuse kernel: platform serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 921600) is a NS16550A
    Jan 26 07:01:18 Betelgeuse kernel: Linux agpgart interface v0.103
    Jan 26 07:01:18 Betelgeuse kernel: rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
    Jan 26 07:01:18 Betelgeuse kernel: rtc_cmos 00:00: alarms up to one month, 114 bytes nvram
    Jan 26 07:01:18 Betelgeuse kernel: ledtrig-cpu: registered to indicate activity on CPUs
    Jan 26 07:01:18 Betelgeuse kernel: TCP: cubic registered
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 10
    Jan 26 07:01:18 Betelgeuse kernel: NET: Registered protocol family 17
    Jan 26 07:01:18 Betelgeuse kernel: Loading compiled-in X.509 certificates
    Jan 26 07:01:18 Betelgeuse kernel: registered taskstats version 1
    Jan 26 07:01:18 Betelgeuse kernel: Magic number: 15:262:29
    Jan 26 07:01:18 Betelgeuse kernel: rtc_cmos 00:00: setting system clock to 2015-01-26 13:01:09 UTC (1422277269)
    Jan 26 07:01:18 Betelgeuse kernel: PM: Hibernation image not present or could not be loaded.
    Jan 26 07:01:18 Betelgeuse kernel: Freeing unused kernel memory: 1160K (ffffffff818e5000 - ffffffff81a07000)
    Jan 26 07:01:18 Betelgeuse kernel: Write protecting the kernel read-only data: 8192k
    Jan 26 07:01:18 Betelgeuse kernel: Freeing unused kernel memory: 656K (ffff88000155c000 - ffff880001600000)
    Jan 26 07:01:18 Betelgeuse kernel: Freeing unused kernel memory: 328K (ffff8800017ae000 - ffff880001800000)
    Jan 26 07:01:18 Betelgeuse kernel: random: systemd-tmpfile urandom read with 2 bits of entropy available
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Initialized drm 1.1.0 20060810
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon kernel modesetting enabled.
    Jan 26 07:01:18 Betelgeuse kernel: checking generic (d0000000 300000) vs hw (d0000000 8000000)
    Jan 26 07:01:18 Betelgeuse kernel: fb: switching to radeondrmfb from VESA VGA
    Jan 26 07:01:18 Betelgeuse kernel: Console: switching to colour dummy device 80x25
    Jan 26 07:01:18 Betelgeuse kernel: [drm] initializing kernel modesetting (RV350 0x1002:0x4E50 0x1584:0x2324).
    Jan 26 07:01:18 Betelgeuse kernel: [drm] register mmio base: 0xDFEF0000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] register mmio size: 65536
    Jan 26 07:01:18 Betelgeuse kernel: [drm:radeon_agp_init] *ERROR* Unable to acquire AGP: -19
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Forcing AGP to PCI mode
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Generation 2 PCI interface, using max accessible memory
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: VRAM: 128M 0x00000000D0000000 - 0x00000000D7FFFFFF (128M used)
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: GTT: 512M 0x00000000B0000000 - 0x00000000CFFFFFFF
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Detected VRAM RAM=128M, BAR=128M
    Jan 26 07:01:18 Betelgeuse kernel: [drm] RAM width 128bits DDR
    Jan 26 07:01:18 Betelgeuse kernel: [TTM] Zone kernel: Available graphics memory: 510898 kiB
    Jan 26 07:01:18 Betelgeuse kernel: [TTM] Initializing pool allocator
    Jan 26 07:01:18 Betelgeuse kernel: [TTM] Initializing DMA pool allocator
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: 128M of VRAM memory ready
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: 512M of GTT memory ready.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] GART: num cpu pages 131072, num gpu pages 131072
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: power management initialized
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: 1 quad pipes, 1 Z pipes initialized.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] PCI GART of 512M enabled (table at 0x0000000037980000).
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: WB enabled
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x00000000b0000000 and cpu addr 0xffff88003791e000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Driver supports precise vblank timestamp query.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: irq initialized.
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Loading R300 Microcode
    Jan 26 07:01:18 Betelgeuse kernel: [drm] radeon: ring at 0x00000000B0001000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] ring test succeeded in 2 usecs
    Jan 26 07:01:18 Betelgeuse kernel: [drm] ib test succeeded in 0 usecs
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Panel ID String: Samsung LTN154X1 WXGA
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Panel Size 1280x800
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Radeon Display Connectors
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Connector 0:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] VGA-1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Encoders:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] CRT1: INTERNAL_DAC1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Connector 1:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] LVDS-1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Encoders:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] LCD1: INTERNAL_LVDS
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Connector 2:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] SVIDEO-1
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Encoders:
    Jan 26 07:01:18 Betelgeuse kernel: [drm] TV1: INTERNAL_DAC2
    Jan 26 07:01:18 Betelgeuse kernel: [drm] fb mappable at 0xD0040000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] vram apper at 0xD0000000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] size 4096000
    Jan 26 07:01:18 Betelgeuse kernel: [drm] fb depth is 24
    Jan 26 07:01:18 Betelgeuse kernel: [drm] pitch is 5120
    Jan 26 07:01:18 Betelgeuse kernel: fbcon: radeondrmfb (fb0) is primary device
    Jan 26 07:01:18 Betelgeuse kernel: Console: switching to colour frame buffer device 160x50
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    Jan 26 07:01:18 Betelgeuse kernel: radeon 0000:01:00.0: registered panic notifier
    Jan 26 07:01:18 Betelgeuse kernel: [drm] Initialized radeon 2.40.0 20080528 for 0000:01:00.0 on minor 0
    Jan 26 07:01:18 Betelgeuse kernel: i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    Jan 26 07:01:18 Betelgeuse kernel: i8042: Detected active multiplexing controller, rev 1.0
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jan 26 07:01:18 Betelgeuse kernel: SCSI subsystem initialized
    Jan 26 07:01:18 Betelgeuse kernel: ACPI: bus type USB registered
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new interface driver usbfs
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new interface driver hub
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new device driver usb
    Jan 26 07:01:18 Betelgeuse kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci: EHCI PCI platform driver
    Jan 26 07:01:18 Betelgeuse kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci: OHCI PCI platform driver
    Jan 26 07:01:18 Betelgeuse kernel: libata version 3.00 loaded.
    Jan 26 07:01:18 Betelgeuse kernel: firewire_ohci 0000:00:06.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: EHCI Host Controller
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 1
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: cache line size of 64 is not supported
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: irq 23, io mem 0xdffff000
    Jan 26 07:01:18 Betelgeuse kernel: ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00
    Jan 26 07:01:18 Betelgeuse kernel: hub 1-0:1.0: USB hub found
    Jan 26 07:01:18 Betelgeuse kernel: hub 1-0:1.0: 6 ports detected
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.0: OHCI PCI host controller
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.0: new USB bus registered, assigned bus number 2
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.0: irq 20, io mem 0xdfffd000
    Jan 26 07:01:18 Betelgeuse kernel: input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    Jan 26 07:01:18 Betelgeuse kernel: hub 2-0:1.0: USB hub found
    Jan 26 07:01:18 Betelgeuse kernel: hub 2-0:1.0: 3 ports detected
    Jan 26 07:01:18 Betelgeuse kernel: pata_sis 0000:00:02.5: version 0.5.2
    Jan 26 07:01:18 Betelgeuse kernel: pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller
    Jan 26 07:01:18 Betelgeuse kernel: scsi host0: pata_sis
    Jan 26 07:01:18 Betelgeuse kernel: scsi host1: pata_sis
    Jan 26 07:01:18 Betelgeuse kernel: ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
    Jan 26 07:01:18 Betelgeuse kernel: ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.1: OHCI PCI host controller
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.1: new USB bus registered, assigned bus number 3
    Jan 26 07:01:18 Betelgeuse kernel: ohci-pci 0000:00:03.1: irq 21, io mem 0xdfffe000
    Jan 26 07:01:18 Betelgeuse kernel: hub 3-0:1.0: USB hub found
    Jan 26 07:01:18 Betelgeuse kernel: hub 3-0:1.0: 3 ports detected
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: 195371568 sectors, multi 16: LBA48
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: limited to UDMA/33 due to 40-wire cable
    Jan 26 07:01:18 Betelgeuse kernel: ata1.00: configured for UDMA/33
    Jan 26 07:01:18 Betelgeuse kernel: scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA 1A PQ: 0 ANSI: 5
    Jan 26 07:01:18 Betelgeuse kernel: usb 1-3: new high-speed USB device number 3 using ehci-pci
    Jan 26 07:01:18 Betelgeuse kernel: ata2.00: ATAPI: Slimtype DVDRW SOSW-852S, PSX3, max UDMA/33
    Jan 26 07:01:18 Betelgeuse kernel: ata2.00: configured for UDMA/33
    Jan 26 07:01:18 Betelgeuse kernel: scsi 1:0:0:0: CD-ROM Slimtype DVDRW SOSW-852S PSX3 PQ: 0 ANSI: 5
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.1 GiB)
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Jan 26 07:01:18 Betelgeuse kernel: sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Jan 26 07:01:18 Betelgeuse kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 26 07:01:18 Betelgeuse kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 26 07:01:18 Betelgeuse kernel: firewire_core 0000:00:06.0: created device fw0: GUID 00030d5325828ec4, S400
    Jan 26 07:01:18 Betelgeuse kernel: tsc: Refined TSC clocksource calibration: 798.238 MHz
    Jan 26 07:01:18 Betelgeuse kernel: sda: sda1 sda2 sda3 < sda5 sda6 >
    Jan 26 07:01:18 Betelgeuse kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 26 07:01:18 Betelgeuse kernel: usb 2-1: new low-speed USB device number 2 using ohci-pci
    Jan 26 07:01:18 Betelgeuse kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Jan 26 07:01:18 Betelgeuse kernel: usbcore: registered new interface driver usbhid
    Jan 26 07:01:18 Betelgeuse kernel: usbhid: USB HID core driver
    Jan 26 07:01:18 Betelgeuse kernel: input: Microsoft Microsoft® Comfort Mouse 4500 as /devices/pci0000:00/0000:00:03.0/usb2/2-1/2-1:1.0/0003:045E:076C.0001/input/input5
    Jan 26 07:01:18 Betelgeuse kernel: microsoft 0003:045E:076C.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft® Comfort Mouse 4500] on usb-0000:00:03.0-1/input0
    Jan 26 07:01:18 Betelgeuse kernel: EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    Jan 26 07:01:18 Betelgeuse kernel: Switched to clocksource tsc
    Jan 26 07:01:18 Betelgeuse kernel: random: nonblocking pool is initialized
    Jan 26 07:01:18 Betelgeuse systemd[1]: systemd 218 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
    Jan 26 07:01:18 Betelgeuse systemd[1]: Detected architecture 'x86-64'.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Set hostname to <Betelgeuse>.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Remote File Systems.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Reached target Remote File Systems.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Encrypted Volumes.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Reached target Encrypted Volumes.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Expecting device dev-sda2.device...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Root Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice Root Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting User and Session Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice User and Session Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Journal Audit Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Device-mapper event daemon FIFOs.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Device-mapper event daemon FIFOs.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting udev Control Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on udev Control Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting LVM2 metadata daemon socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on LVM2 metadata daemon socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting System Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice System Slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Slices.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Reached target Slices.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting system-getty.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice system-getty.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting udev Kernel Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on udev Kernel Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Expecting device dev-sda6.device...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Journal Socket (/dev/log).
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Journal Socket (/dev/log).
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Journal Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Journal Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Journal Service...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Huge Pages File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Setup Virtual Console...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started File System Check on Root Device.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Debug File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting udev Coldplug all Devices...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Remount Root and Kernel File Systems...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting POSIX Message Queue File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Temporary Directory...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting system-systemd\x2dfsck.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Created slice system-systemd\x2dfsck.slice.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Delayed Shutdown Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Listening on Delayed Shutdown Socket.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Expecting device dev-sda1.device...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Create list of required static device nodes for the current kernel...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Set Up Additional Binary Formats...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Load Kernel Modules.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounted FUSE Control File System.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Apply Kernel Variables...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Configuration File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 117 (systemd-binfmt)
    Jan 26 07:01:18 Betelgeuse systemd[1]: Mounting Arbitrary Executable File Formats File System...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Create list of required static device nodes for the current kernel.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started udev Coldplug all Devices.
    Jan 26 07:01:18 Betelgeuse kernel: EXT4-fs (sda5): re-mounted. Opts: data=ordered
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Remount Root and Kernel File Systems.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Starting Load/Save Random Seed...
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Rebuild Dynamic Linker Cache.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started First Boot Wizard.
    Jan 26 07:01:18 Betelgeuse systemd[1]: Started Create System Users.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting Create Static Device Nodes in /dev...
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Rebuild Hardware Database.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Arbitrary Executable File Formats File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Debug File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Huge Pages File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted POSIX Message Queue File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Configuration File System.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Mounted Temporary Directory.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Apply Kernel Variables.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Load/Save Random Seed.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Set Up Additional Binary Formats.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Create Static Device Nodes in /dev.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting udev Kernel Device Manager...
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting Local File Systems (Pre).
    Jan 26 07:01:19 Betelgeuse systemd[1]: Reached target Local File Systems (Pre).
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started Setup Virtual Console.
    Jan 26 07:01:19 Betelgeuse systemd[1]: Started udev Kernel Device Manager.
    Jan 26 07:01:19 Betelgeuse kernel: tsc: Marking TSC unstable due to TSC halts in idle
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: acpi_idle registered with cpuidle
    Jan 26 07:01:19 Betelgeuse kernel: Switched to clocksource acpi_pm
    Jan 26 07:01:19 Betelgeuse kernel: input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:03/PNP0C0D:00/input/input6
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Lid Switch [LID]
    Jan 26 07:01:19 Betelgeuse kernel: input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Sleep Button [SLPB]
    Jan 26 07:01:19 Betelgeuse kernel: input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input8
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Power Button [PWRB]
    Jan 26 07:01:19 Betelgeuse kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input9
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Power Button [PWRF]
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: AC Adapter [AC0] (on-line)
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Battery Slot [BAT0] (battery present)
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    Jan 26 07:01:19 Betelgeuse kernel: [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
    Jan 26 07:01:19 Betelgeuse kernel: acpi device:02: registered as cooling_device1
    Jan 26 07:01:19 Betelgeuse kernel: input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:00/LNXVIDEO:00/input/input10
    Jan 26 07:01:19 Betelgeuse kernel: parport_pc 00:04: reported by Plug and Play ACPI
    Jan 26 07:01:19 Betelgeuse kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
    Jan 26 07:01:19 Betelgeuse kernel: thermal LNXTHERM:00: registered as thermal_zone0
    Jan 26 07:01:19 Betelgeuse kernel: ACPI: Thermal Zone [THRM] (75 C)
    Jan 26 07:01:19 Betelgeuse kernel: sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x0c00
    Jan 26 07:01:19 Betelgeuse kernel: NET: Registered protocol family 23
    Jan 26 07:01:19 Betelgeuse kernel: agpgart-amd64 0000:00:00.0: AGP bridge [1039/0755]
    Jan 26 07:01:19 Betelgeuse kernel: agpgart-amd64 0000:00:00.0: AGP aperture is 128M @ 0xe0000000
    Jan 26 07:01:19 Betelgeuse systemd-journal[106]: Journal started
    Jan 26 07:01:15 Betelgeuse systemd-udevd[143]: starting version 218
    Jan 26 07:01:19 Betelgeuse systemd[1]: Starting Flush Journal to Persistent Storage...
    Jan 26 07:01:20 Betelgeuse systemd[1]: Found device TOSHIBA_MK1032GAX 1.
    Jan 26 07:01:20 Betelgeuse systemd[1]: Starting File System Check on /dev/sda1...
    Jan 26 07:01:20 Betelgeuse systemd[1]: Started Journal Service.
    Jan 26 07:01:20 Betelgeuse kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, chip->init
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, Found chip at base=0x02e
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jan 26 07:01:20 Betelgeuse kernel: nsc_ircc_open(), can't get iobase of 0x2f8
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, Found chip at base=0x02e
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jan 26 07:01:20 Betelgeuse kernel: nsc_ircc_open(), can't get iobase of 0x2f8
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, chip->init
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, Found chip at base=0x02e
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc, driver loaded (Dag Brattli)
    Jan 26 07:01:20 Betelgeuse kernel: nsc-ircc 00:03: disabled
    Jan 26 07:01:20 Betelgeuse kernel: sis900.c: v1.08.10 Apr. 2 2006
    Jan 26 07:01:20 Betelgeuse kernel: mousedev: PS/2 mouse device common for all mice
    Jan 26 07:01:20 Betelgeuse kernel: snd_intel8x0 0000:00:02.7: intel8x0_measure_ac97_clock: measured 52717 usecs (2536 samples)
    Jan 26 07:01:20 Betelgeuse kernel: snd_intel8x0 0000:00:02.7: clocking to 48000
    Jan 26 07:01:20 Betelgeuse kernel: 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
    Jan 26 07:01:20 Betelgeuse kernel: 0000:00:04.0: Using transceiver found at address 1 as default
    Jan 26 07:01:20 Betelgeuse kernel: eth0: SiS 900 PCI Fast Ethernet at 0x000000000001d800, IRQ 19, 00:03:0d:32:21:af
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: CardBus bridge found [1584:3005]
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst. If you experience problems or performance issues, use the yenta_socket parameter 'o2_speedup=off'
    Jan 26 07:01:20 Betelgeuse kernel: input: PC Speaker as /devices/platform/pcspkr/input/input11
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0a38, PCI irq 17
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.0: Socket status: 30000820
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.1: CardBus bridge found [1584:3005]
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.1: ISA IRQ mask 0x0a38, PCI irq 17
    Jan 26 07:01:20 Betelgeuse kernel: yenta_cardbus 0000:00:09.1: Socket status: 30000006
    Jan 26 07:01:20 Betelgeuse kernel: MCE: In-kernel MCE decoding enabled.
    Jan 26 07:01:20 Betelgeuse kernel: EDAC MC: Ver: 3.0.0
    Jan 26 07:01:20 Betelgeuse kernel: AMD64 EDAC driver v3.4.0
    Jan 26 07:01:20 Betelgeuse kernel: EDAC amd64: DRAM ECC enabled.
    Jan 26 07:01:20 Betelgeuse kernel: EDAC amd64: K8 revE or earlier detected (node 0).
    Jan

    Ok, thanks. My confusion was because I was unaware that makepkg was simply a bash script.
    I did what you suggested, and copied it to my home directory, edited the create_signature section to add the --verbose option and changed it to output to stdout. I added --verbose, --debug-level guru, and --log-file options to my gpg-agent.conf file. I ran the makepkg process twice, and as expected it asked for a password the first attempt and failed immediately on the second attempt. When it should be loading a cached password, it is bombing out with a "Broken pipe" error.
    Terminal output of build 1:
    [gilmoreja@Betelgeuse pulseaudio-ctl]$ ~/makepkg -fics
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Making package: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:10:51 CST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Found pulseaudio-ctl-1.59.tar.xz
    ==> Validating source files with sha256sums...
    pulseaudio-ctl-1.59.tar.xz ... Passed
    ==> Extracting sources...
    -> Extracting pulseaudio-ctl-1.59.tar.xz with bsdtar
    ==> Removing existing $pkgdir/ directory...
    ==> Starting build()...
    Setting version
    ==> Entering fakeroot environment...
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Starting package()...
    Installing main script, initd and config...
    install -Dm755 common/pulseaudio-ctl "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/bin/pulseaudio-ctl"
    install -Dm644 common/config.skel "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/pulseaudio-ctl/config.skel"
    Installing manpage...
    install -Dm644 doc/pulseaudio-ctl.1 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    gzip -9 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    ==> Tidying install...
    -> Purging unwanted files...
    -> Removing libtool files...
    -> Removing static library files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package "pulseaudio-ctl"...
    -> Generating .PKGINFO file...
    -> Adding install file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Signing package...
    gpg: no running gpg-agent - starting '/usr/bin/gpg-agent'
    gpg: waiting for the agent to come up ... (5s)
    gpg: connection to agent established
    gpg: writing to '/home/gilmoreja/sources/pulseaudio-ctl/pulseaudio-ctl-1.59-2-any.pkg.tar.xz.sig'
    gpg: RSA/SHA256 signature from: "7397C1D5 James A. Gilmore II (Unknown Zombie) <[email protected]>"
    -> Created signature file /home/gilmoreja/sources/pulseaudio-ctl/pulseaudio-ctl-1.59-2-any.pkg.tar.xz.sig.
    ==> Leaving fakeroot environment.
    ==> Finished making: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:10:58 CST 2015)
    ==> Installing package pulseaudio-ctl with pacman -U...
    Password:
    ==> ERROR: Aborted by user! Exiting...
    Terminal output of build 2:
    [gilmoreja@Betelgeuse pulseaudio-ctl]$ ~/makepkg -fics
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Making package: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:11:03 CST 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Found pulseaudio-ctl-1.59.tar.xz
    ==> Validating source files with sha256sums...
    pulseaudio-ctl-1.59.tar.xz ... Passed
    ==> Extracting sources...
    -> Extracting pulseaudio-ctl-1.59.tar.xz with bsdtar
    ==> Removing existing $pkgdir/ directory...
    ==> Starting build()...
    Setting version
    ==> Entering fakeroot environment...
    ==> WARNING: Cannot find the sudo binary. Will use su to acquire root privileges.
    ==> Starting package()...
    Installing main script, initd and config...
    install -Dm755 common/pulseaudio-ctl "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/bin/pulseaudio-ctl"
    install -Dm644 common/config.skel "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/pulseaudio-ctl/config.skel"
    Installing manpage...
    install -Dm644 doc/pulseaudio-ctl.1 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    gzip -9 "/home/gilmoreja/sources/pulseaudio-ctl/pkg/pulseaudio-ctl/usr/share/man/man1/pulseaudio-ctl.1"
    ==> Tidying install...
    -> Purging unwanted files...
    -> Removing libtool files...
    -> Removing static library files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package "pulseaudio-ctl"...
    -> Generating .PKGINFO file...
    -> Adding install file...
    -> Generating .MTREE file...
    -> Compressing package...
    ==> Signing package...
    gpg: writing to '/home/gilmoreja/sources/pulseaudio-ctl/pulseaudio-ctl-1.59-2-any.pkg.tar.xz.sig'
    gpg: signing failed: Broken pipe
    gpg: signing failed: Broken pipe
    ==> WARNING: Failed to sign package file.
    ==> Leaving fakeroot environment.
    ==> Finished making: pulseaudio-ctl 1.59-2 (Mon Jan 26 15:11:04 CST 2015)
    ==> Installing package pulseaudio-ctl with pacman -U...
    Password:
    ==> ERROR: Aborted by user! Exiting...
    [gilmoreja@Betelgeuse pulseaudio-ctl]$
    gpg-agent.log file for build 1:
    2015-01-26 15:10:52 gpg-agent[10408] listening on socket '/home/gilmoreja/.gnupg/S.gpg-agent'
    2015-01-26 15:10:52 gpg-agent[10409] gpg-agent (GnuPG) 2.1.1 started
    2015-01-26 15:10:53 gpg-agent[10409] handler 0x7f88cc221700 for fd 5 started
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK Pleased to meet you, process 10406
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- RESET
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION ttyname=/dev/pts/0
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION ttytype=xterm
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION display=:0.0
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION xauthority=/home/gilmoreja/.Xauthority
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION lc-ctype=en_US.UTF-8
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION lc-messages=en_US.UTF-8
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION allow-pinentry-notify
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- OPTION agent-awareness=2.1.0
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- AGENT_ID
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> ERR 67109139 Unknown IPC command <GPG Agent>
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- HAVEKEY 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847 316BA63D673F62666176D0B2896B145BDABD9733
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- KEYINFO 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847
    2015-01-26 15:10:53 gpg-agent[10409] DBG: agent_get_cache '2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847' (mode 2) ...
    2015-01-26 15:10:53 gpg-agent[10409] DBG: ... miss
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> S KEYINFO 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847 D - - - P - - -
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- RESET
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- SIGKEY 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- SETKEYDESC Please+enter+the+passphrase+to+unlock+the+OpenPGP+secret+key:%0A%22James+A.+Gilmore+II+(Unknown+Zombie)+<[email protected]>%22%0A2048-bit+RSA+key,+ID+7397C1D5,%0Acreated+2012-06-04.%0A
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- SETHASH 8 BEEA84C75FC026299EBB643F8FB19AEC25D5722936A59DB29DBD95C299B9A3C6
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- PKSIGN
    2015-01-26 15:10:53 gpg-agent[10409] DBG: agent_get_cache '2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847' (mode 2) ...
    2015-01-26 15:10:53 gpg-agent[10409] DBG: ... miss
    2015-01-26 15:10:53 gpg-agent[10409] starting a new PIN Entry
    2015-01-26 15:10:53 gpg-agent[10409] DBG: connection to PIN entry established
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 -> INQUIRE PINENTRY_LAUNCHED 10411
    2015-01-26 15:10:53 gpg-agent[10409] DBG: chan_5 <- END
    2015-01-26 15:10:58 gpg-agent[10409] DBG: agent_put_cache '2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847' (mode 2) requested ttl=0
    2015-01-26 15:10:58 gpg-agent[10409] DBG: skey: (private-key
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (rsa
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (n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
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (e #010001#)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (d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
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (p #00D95A0315DA1A1177A0C0018EBB94887BA3FA454F17603AA8BB67C59796A1F102011BF676A3290437F03CD1AA9EA5F25CB22138DDDBE1048501F8294204E3AA639CBB1803B1F85E1BF57921B581DBD6201A83B333A1A93A13E372501CB55F5E2DFF991F41C1B3800E1C9DD3E303356FCF2382A7C80D6433780BC6C4E66D371493#)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (q #00E4B879C556CED294F545C4E4AF22B1C9F908566D6C9377FD598370AB7FC8672C49FAAB0E1CD6FC3C092A117EC0EFE0D0D1C2B9148C721422A7AE174E1DCB831D490302DE30435B75E822E71A288ED3783DDD8C15152C7ABFB29235D4F8217D3A8FFB6862A1A51A8A70CA74111A9E43A0FFE7E576DBB7FB3E2C6D711929A77515#)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (u #00B2BF39C398644392803548A393068F7F7226F147FB95B9C6CF72C12A626CF698D028694E3FDC1AA217132068906FABC2CA9F7CBB2A47B8B09DF5FDCFD34872C2074F4E2FAC358C0F61C8A32BEFEB9D8862A042BD3DADE6001C39B70D9574FC8B9CCD1DA012959CF2BBD4258A2A339FF99C3200E4CA36F2D623BEE4E6245551EC#)))
    2015-01-26 15:10:58 gpg-agent[10409] DBG: hash: (data
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (flags pkcs1)
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (hash sha256 #BEEA84C75FC026299EBB643F8FB19AEC25D5722936A59DB29DBD95C299B9A3C6#))
    2015-01-26 15:10:58 gpg-agent[10409] DBG: PKCS#1 block type 1 encoded data:+01ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffff003031300d060960864801650304020105000420be \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ea84c75fc026299ebb643f8fb19aec25d5722936a59db29dbd95c299b9a3c6
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign data:+01ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ffffffffffffffffffffff003031300d060960864801650304020105000420be \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ea84c75fc026299ebb643f8fb19aec25d5722936a59db29dbd95c299b9a3c6
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign n:+c230cad4c56184746321e1333ba70f10dfc93a6f6f4cfd4074111fd46e8c9774 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: e9f42acb30a02074322705fef1bf3a0d21c9d9a3e26eeb37c25fdbe18b057bdb \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: aa8aaa44c7e109ca1164ea051062c5da14def16cc40dc9a832438e5068c70b58 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 0cd22744ed6d98cae9f4a69817fc11775ff3a06abe870e12a4acfb1f49480d60 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 2903e2ce85dadaf0caaa5a5e4264956736bc7cbe71c7d5ac402fe594ae6e04b0 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: accfb5ead9ca26c7ede89ad69811cdf9735fa1eab7984fc731913d12f500acf3 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: abeed2dfe589dc27eabe117421069a6432a609ef794b69b2cda1e32df0cee11b \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 53d89750624daec0d731db447837cc696b77f427f0bd9fbb2a276d6618d0df0f
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign e:+010001
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign d:+1d170513799c01a513c29c033a40ece358bac2cbb5af2152f9f024c60467803a \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: cddf3b57e3e960e3372e1c5a542992cf2bcc1a93cfd450dd31fb7d2b5cd18dfb \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: daa0da1fe297660984b08ad4065fdd86ad50b676d629c097372c6291ce185f2d \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 2a02834a728cd3f235b8e609ebb1e185f1f443882a117e3cb1b98e06e249ee62 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: c1ff7687cca650976001757d1d210581538f8252f12731b5f75e5b2b0c6c2478 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 059e9d9d2be8d9f402b139ec3385730d00cb95114c02b0dec2d4234e8fa610c3 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 07487e0f89bc373726317e7cf09daca54505c01bda0e9af1435a0a01008e1c11 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 6b104d0eb56b4e4138c87f0e6ef406bfb518f8dd18bd08fab629fa971b094bdd
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign p:+d95a0315da1a1177a0c0018ebb94887ba3fa454f17603aa8bb67c59796a1f102 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 011bf676a3290437f03cd1aa9ea5f25cb22138dddbe1048501f8294204e3aa63 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 9cbb1803b1f85e1bf57921b581dbd6201a83b333a1a93a13e372501cb55f5e2d \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ff991f41c1b3800e1c9dd3e303356fcf2382a7c80d6433780bc6c4e66d371493
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign q:+e4b879c556ced294f545c4e4af22b1c9f908566d6c9377fd598370ab7fc8672c \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 49faab0e1cd6fc3c092a117ec0efe0d0d1c2b9148c721422a7ae174e1dcb831d \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 490302de30435b75e822e71a288ed3783ddd8c15152c7abfb29235d4f8217d3a \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 8ffb6862a1a51a8a70ca74111a9e43a0ffe7e576dbb7fb3e2c6d711929a77515
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign u:+b2bf39c398644392803548a393068f7f7226f147fb95b9c6cf72c12a626cf698 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: d028694e3fdc1aa217132068906fabc2ca9f7cbb2a47b8b09df5fdcfd34872c2 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 074f4e2fac358c0f61c8a32befeb9d8862a042bd3dade6001c39b70d9574fc8b \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 9ccd1da012959cf2bbd4258a2a339ff99c3200e4ca36f2d623bee4e6245551ec
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign res:+c1dd570db98531a7b86260e0a122377b462c1b827d1f4406091dfcb4b8f6b26f \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 35c098eb70ebd6adc8abfce8d44185c5ac9c503f45037cf1adaf82b07fb63f69 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 13592df46b34381788a618c73db29a3fc0282d6ccfc957d4638a339d83b315bd \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: ff70ab17b658f99ebfaba934f7ef1409e8300b362176458d805faa86bc6150b1 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 389f8148c045c64baf5a794d3f1319b090d7aeba2a11598b250943b51f4d26e5 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: cdfe9c6558694e5ea3268ea343001a160e0276241b330af00f28404b82840961 \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: aabbf16aebbb0d7d2278bcaa028f7b59b2c2d8cedb9afe3a146936af8bf1154f \
    2015-01-26 15:10:58 gpg-agent[10409] DBG: 92bfbedec50777b1be1dd813618f9ed681ea7cebc554ae0e0fa1f52d421ffe52
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rsa_sign => Success
    2015-01-26 15:10:58 gpg-agent[10409] DBG: rslt: (sig-val
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (rsa
    2015-01-26 15:10:58 gpg-agent[10409] DBG: (s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
    2015-01-26 15:10:58 gpg-agent[10409] DBG: chan_5 -> [ 44 20 28 37 3a 73 69 67 2d 76 61 6c 28 33 3a 72 ...(277 byte(s) skipped) ]
    2015-01-26 15:10:58 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:10:58 gpg-agent[10409] DBG: chan_5 <- [eof]
    2015-01-26 15:10:58 gpg-agent[10409] handler 0x7f88cc221700 for fd 5 terminated
    gpg-agent.log file for build 2:
    2015-01-26 15:11:04 gpg-agent[10409] handler 0x7f88cc221700 for fd 5 started
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK Pleased to meet you, process 10656
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- RESET
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION ttyname=/dev/pts/0
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION ttytype=xterm
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION display=:0.0
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION xauthority=/home/gilmoreja/.Xauthority
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION lc-ctype=en_US.UTF-8
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION lc-messages=en_US.UTF-8
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION allow-pinentry-notify
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- OPTION agent-awareness=2.1.0
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- AGENT_ID
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> ERR 67109139 Unknown IPC command <GPG Agent>
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- HAVEKEY 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847 316BA63D673F62666176D0B2896B145BDABD9733
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 -> OK
    2015-01-26 15:11:04 gpg-agent[10409] DBG: chan_5 <- KEYINFO 2C25A2BA6CD6852CC0B0AB7BE05BE844C36C8847
    Last edited by gilmoreja (2015-01-26 23:08:59)

  • Report Template does not save

    HI,
    I am creating a new report template. On save I get this error: Error occurred while saving the document template; save again.  Although I save again, it does not save the layout. At this stage I don't check the symbols as I have not yet created any into the layout.  Even though I say 'check', it does not save at all.
    Can anyone help.  I have checked the File locations for Template folder to be correct C:\....\SAP\FrontEnd\SAPgui\wwi
    Am on GUI 7100.3.12
    Patch 12
    Any recommendations ? Thanks

    Hello Sanjay,
    It seems to be DMS configuration issue. May be your system is trying to store the template document to external database by using "kpro". Please check for following two configurations:
    1. Go to Basic Data & Tools-->Report Definition >Settings for Document Management>Assign EHS doc type to DMS doc type Here for doc type "SBV" , Ty. should be "SBV" and Data Carrier should be "SAP System" if you are not specifying any     external server for document storage.
    2. Next, Go to Basic Data & Tools-->Report Definition >Settings for Document Management> Check Doc types and doc statuses.  Go to the "Details" of doc type "SBV", and uncheck "kpro" if checked.
    If you have configured external server for WWI docs, then you need to define different data carrier.
    Please tell if it solves your problem, otherwise you may be probably having problem with your document status management.
    In that case, you may like to refer following SAP notes in sequence.
    995736,1005225,1091699.
    regards
    Pavan

  • Firefox does not save toolbar I made

    Since FF upgraded me to Firefox 23 My tool bars are messed
    Every time I make a new toolbar Via "Customize" > "Add New Toolbar" after I exit it does not save.
    Yes I read over 10 different articles on it.
    1) I deleted the localstore.rdf and started from scratch. After 15 minutes of dragging all the icons to various toolbars I close out of Customize. I then restart Only to find my toolbar not saves and icon missing (placed back into the Customize Box)
    2) Only solution ALWAYS given is going to Safe Mode and resetting everything.
    That requires me to spend 5 hours backing all the settings and data I have saved in the various 189 items loaded.
    Why so many? If not that many I would have to spend 6 hour more all day on my computer doing things that many of these addons do for me. Time is Money.
    3) This is not the first time over the 8 years or so of using Firefox this has occured.
    4) Question why doen't save when you close out of "Customize" than when you exit? Plus what in Firefox is messed up that it is not saving right?

    Nope, I tried it again and added buttons to the New Tool bar I made and everything disappeared once I restarted Firefox up again. So they have not solved it. From FF 23 now on FF26 and it has not been fixed

  • After importing received and set messages from Opera Mail, Thunderbird works fine but does not save sent messages to Sent folder, even though messages are sent

    I successfully imported messages from Opera Mail. Initially the Sent mailbox was not showing in Thunderbird. A quick removal and fresh installation solved that, but Thunderbird does not save the sent messages to the Sent box, where the imported Opera Mail messages are stored. Even though messages are not saved, they are sent correctly. The image attached shows the error message.

    Probably a name-confuse If you store sent on mailserver it has to have the right name. (subscribe)
    You could set up under Account settings / copies and folders (maps) Sent pointing to the right local folder.

  • HT201317 I've noticed two things that my ipad no longer does, if save an image from graphic art on the internet, it used to save them to photostream, it no longer does, and with all the settings on my photos no longer shared between ipad and pc, like it u

    I've noticed two things my Ipad no longer does, If I save an image from an internet graphic file - facebook or whatever, the photo used to be saved to photostream... it no longer saves it to anywhere. Also having made sure all the boxes are ticked with photostream and ICloud and not knowingly changed anything, photos take with Ipad/photostream no longer end up in icloud and available to other machines eg. windows pc. Anyone got any suggestions?

    Try here:
    iPod touch: Hardware troubleshooting
    iOS: Not responding or does not turn on
    To get the calender and contacts back if you can't get the iPod working is to restore the new iPod from the backup of the old one.

  • Safari 7.02 does not save my preference or view changes

    Safari 7.02 does not save my preference or view changes

    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Preferences/com.apple.Safari.plist
    Right-click or control-click the highlighted line and select
    Services ▹ Show Info in Finder (or just Show Info)
    from the contextual menu.* An Info dialog should open.
    Does the dialog show "You can read and write" in the Sharing & Permissions section?
    In the General section, is the box labeled Locked checked?
    What is the Modified date?
    If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

  • C4700 scan does not save on mac 10.9.4

    When I scan something from my macBook Pro (OS 10.9.4) it does the overview and says it scanned the sheet, but it does not save. It's set to go to my desktop, but is no where to be found on the mac.
    Is there a download I need to load for 10.9.4? Anyone have the link? Or is another issue, and how can I correct it? (I seem to remember this happening before and it needed an update from HP.)

    Welcome to the HP Forums AnnieRie,
    I read your post, which indicates that the scans don't save on the Mac 10.9.4.
    I can help you with this.
    The drivers for Maverick are installed by the Apple Updates. The HP Scan software isn't available for Maverick.
    If you have a older version, this will cause the issue you are experiencing.
    I have provided a document on How to Scan: OS X v10.9. Use the Apple software for scanning.
    If the issue persists then check the driver name that is installed for the printer. The Airprint driver might be installed instead of the Printer's driver. (usually defaults to Airprint)
    Click the Apple menu and then click System Preferences. Click Printers & Scanners, highlight the printer name on the left side and on the right side of the screen should show the name.
    If the printer name shows Airprint then that is the Apple drivers, delete it and add the printer name back in from the list. Click the - sign to delete the driver and then click the + sign to add the driver, might have to click the drop down to select the printer's name to add it in.
    Here is a alternate driver provided by Apple, if you are still having issues scanning. HP Printer Drivers v.2.16.1 for OS X.
    If you need further assistance, let me know.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Firefox does not save my settings when I reboot

    I have Windows 7 Ultimate. I was having problems with Firefox 3.6.16 crashing to the point where it wouldn't work. I uninstalled it and downloaded version 4 but had problems with it hanging all the time. I went through the help section, one of the things I did that was recommended was to delete my sessionstore files and any extra copies. I think there were three of them. I deleted them all but Firefox 4 still was hanging.
    I uninstalled 4 and reinstalled 3.6.16 again. Everything seems to be working okay except when I reboot or restart my computer it does not save all of my password logins or any special settings on websites I visit all the time. So every time I start my computer I have to log into all my sites again, and I have a lot of them so this is really a pain. I'm not sure if this has to do with deleting the sessionstore files or not. I checked and I do have one sessionstore file instead of three.
    Not sure what else to try. If I leave my computer on I stay logged in to all my sites and my preferences on those sites are maintained. Anyone have any idea what's going on?

    I have tried to make a backup of the bookmarks file. Renamed the old one and called the backup "bookmarks.html".
    The places.sqlite file is not "secured" (there does not exist a "locked" attribute in the general tab on the Mac), so I assume it is not locked.
    Nothing seems to work. Possibly I can best uninstall Firefox and try to reinstall it, or does that not solve the problem.
    Otherwise I go back to Safari :-)

  • TS3274 Camera does not save photos to picture roll

    I snap pictures and shoot video but it does not save to "Photos" camera roll.  This is a newly restored IPAD since I broke the screen on my old one.  Everything worked as expected on old one. I have everything "on" under privacy.

    If you are sure that all privacy settings are correct including anything in Photos in restrictions, did you try quitting the camera app and rebooting the iPad?
    Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Maybe you are looking for

  • DirectAccess 2012R2 - Web Filtering

    I have a need to do web filtering (I think). What I have is an external web site (not Corpnet) that can only be accessed from a Corpnet IP address range. Based on this When I go to that web site Split Tunneling sends the traffic down the client side

  • Is it possible to create all views in MM01 through ALE(MATMAS) ?

    Hi, I want to create all views(One or two may not require) in Inbound MATMAS through ALE. Is it possible ? Currently its creating only Basic data1 & 2,General Plant Data/Storage1 &2 ,plant stock. I didn't set any filter for any segments. Please don't

  • 17' Replacement Screen. A bug caused it.

    Literaly, a little bug was walking underneath the LCD film. So when LCD was turn on there was, a anoing bug walking through the screen. I open the Imac G5, and I could get the bug out of the LCD. Worst, I broke one of the bus cables that goes from th

  • Dynamic Array Names

    That's fairly complex to explain, so forgive me if I miss some details. I got a code working for Coldfusion 9, but my host only uses Coldfusion 8, and I'm not in any position to change that (or to change host for that matter). Now, I've a recipe list

  • Regarding Availability check in Sales Order

    Hi All, We are using the Availability check with ATP. In the scope of check, activated "Include Sales requirements" to consider the open sales orders while doing the avalability check. But the Problem is while doing the Availability check, system is