[SOLVED] Downgrading networkmanager KDE doesn't boot/no connection

Hi
Since a recent Networkmanager update I cannot connect to my Samba shares anymore. Also, my xbmc and vlc remotes over android cannot connect either. I decided to downgrade networkmanager from 0.9.8 to 0.9.6 and as a result I lost my internet connection and KDE takes forever to boot and when it does half of the things doesn't seem to work.
Any ideas?
Cheers
Cpt.
[EDIT] turns out uninstalling networkmanager, deleting /etc/NetworkManager fixes the boot issue. Reinstalling networkmanager and everything is fixed. However, I cannot seem to downgrade (as /etc/NetworkManager doesn't get restored automatically), which means that for the time being I cannot remotely connect to my archbox.
Last edited by capthilts (2013-03-12 18:07:29)

capthilts wrote:
Hi
Since a recent Networkmanager update I cannot connect to my Samba shares anymore. Also, my xbmc and vlc remotes over android cannot connect either. I decided to downgrade networkmanager from 0.9.8 to 0.9.6 and as a result I lost my internet connection and KDE takes forever to boot and when it does half of the things doesn't seem to work.
Any ideas?
Cheers
Cpt.
[EDIT] turns out uninstalling networkmanager, deleting /etc/NetworkManager fixes the boot issue. Reinstalling networkmanager and everything is fixed. However, I cannot seem to downgrade (as /etc/NetworkManager doesn't get restored automatically), which means that for the time being I cannot remotely connect to my archbox.
Uhh...
if it helps at all, here's a list of files that consist of /etc/NetworkManager/
networkmanager /etc/NetworkManager/
networkmanager /etc/NetworkManager/NetworkManager.conf
networkmanager /etc/NetworkManager/dispatcher.d/
networkmanager /etc/NetworkManager/system-connections/
I got it from running
$ pacman -Ql networkmanager | grep /etc
In retrospect, that probably didn't help at all... have you tried just downloading the tar file for networkmanager and manually install /etc/NetworkManager/, or maybe removing the more networkmanager tar files from your /var/cache/pacman/pkg/ directory and then reinstalling networkmanager might help... I dunno.
Last edited by lspci (2013-03-13 03:42:44)

Similar Messages

[SOLvED]Installation restore after BIOS update. UEFI doesn't boot.

Hello.
In order to solve my trouble with firewire on my motherboard in was adviced -in the FW mailing list- to update the BIOS. As expected the boot entry created with efibootmgr was erased but thats fine and i knew it was going to happen.
The problem however is that neither archboot (USB) neither archiso (CD) nor ubuntu12.04 (USB) can boot into it so i can restore the uefi entries.
All hang with a blank screen. Ubuntu and Archboot booted fine in UEFI mode before the update.
I tried nomodeset, acpi=off and noapic but ended up with the same blank screen and no messages at all.
Last edited by 89c51 (2012-09-04 11:45:01)

I downgraded to the previous (83) and to the original (70) and it doesn't boot in any of those two in UEFI.
It worked fine with version 70 before the morning update.
dafuq
Last edited by 89c51 (2012-09-03 16:27:55)

KDE doesn't recognize CDs and DVDs after update.[Solved]

Since the upgrade of KDE to 4.5.3 (but I'm not sure for before that) I can't get any Cds or DVDs to work.
I had few ideas to what could cause this, but they all proved wrong:
1)I forgot to load the modules when compiling the ck-kernel with streamline option. this isn't the case as it also doesn't work on kernel26-lts.
2)K3B is responsible for this. After the upgrade of KDe the next thing that could brake it was K3B, but actually K3B is the only KDE thing that still recognizes the DVDs and CDs. Did K3B change the premissions?
If that's the case how do i fix it. i followed the Wiki guide, and it still doesn't work. K3Bsettings don't give me any other option other than the one that is default.
3)I've installed kde-cdemu-manager from AUR, but I also removed it so that shouldn't be the problem, right?
And that's all the things I installed up to the point at which I noticed that KDE doesn't want to mount and doesn't even recognises CDs and DVDs.
But I could also post my pacman.log if you wish.
Thanks for help in advance.
Last edited by Primoz (2010-11-06 18:11:10)

Silly me I should check the ArchWiki first: https://wiki.archlinux.org/index.php/HA … zed_by_HAL
Basically I only had to remove my cd and dvd rom from fstab and everything works.
(I also just in case removed the usb from it too, even though it worked, and it still does.)
PS.: Actually the Wiki is wrong. If you remove the /etc/hal/fdi/information/media-check-disable-storage_model_your-CD/DVD-model.fdi, HAL will just create new one after reboot. So changing it from false to true solves the problem.
Last edited by Primoz (2010-11-07 19:31:43)

Tecra S1 doesn't boot and hangs at (boot) splash screen

Tecra S1 Model PT831E-107EQ-GR
Problems started a month ago. It randomly didn't booted. After some power off/on tries it finally booted and worked properly. Because it happened more often I've bought a new hard drive (Toshiba 40 GB). I've had Acronis True Image and planned to make a disk clone to the new drive. The problem is that a notebook now doesn't boot anymore so I cannot boot it from A CD nor hard drive. It stops at "In Touch..." logo with "Press [F12] for the boot device selection menu" text and doesn't react any key. I tried to boot with no CD, no hard drive - the same. I also connected internal HD using ATA-To-USB adapter - the same. Does it mean that's not a disk problem but motherboard or other components? Is it possible to enter BIOS before boot selection screen?
Regards,
Jacek

Problem solved. There was a broken PCB under the CPU socket. I've found that pressing with my finger and holding CPU while booting allowed to startup the system while releasing the finger caused system hanging and its total crash. Our local service tried to repair it but with no success. Finally two days ago we've found a working motherboard (a used one) for about 200 USD and now I'm waiting for installing it in the laptop. Th regular price for a new one (about 400 Euro) is too much, but 200 USD is OK. I do like the laptop because of its ports (LPT, RS232). It's used for programming and controlling some older devices. Newer laptops have no LPTs nor RS232s and it's not easy to find a working USB adapter because the software we're using is even from DOS times and has hard-coded IRQs for those ports.
Anyway, I hope it'll back from the service fresh and new, and of course working ;)
Thank you for your tips.
Regards,
Jacek

HP Stream 7-Windows 10 doesn't boot, I can't recovery 8.1 because can't boot from USB-HELP please!!

Hi everybody, I'm new here!
I am (scuse me: WAS) enjoying a Stream 7
Some days ago I tried to install Windows 10 TP upgrading 8.1 with Bing. After some waiting time it succeeded, but unfortunately I forgave to put in the tablet's SSD the hp drivers, thinking they weren't necessary. So touchscreen, WiFi and all the other stuff didn't work. After I collegated via OTG a keyboard and a mouse I managed to use Windows 10.
Trying to install drivers, my fault, I opened an .exe of Realtek (maybe for the audio), tablet asked to reboot and after that I cannot access to Windows anymore.
I tried to boot Windows 8.1 from a USB, but it doesn't boot, the same even if i disable secure boot.
With disabled bitlocker Windows gives this error
In boot option I set these settings
I put the usb in this way:
The Stream doesn't consider the USB absolutely XD
If I enable again the secure boot Windows gives this error (that at 99% is caused by the .exe I installed):
Rebooting the Stream a couple of time with secure boot it goes in a menu (where touchscreen works) where there are a lot of options to reset Windows, but none of them works. If I try to format from this menu it asks for my account's password, but it doesn't accepts the mine :/
If I try to open the recovery (from volume minus button when it starts) it gives this message:
Waiting for help,
Thank you for your patience!
This question was solved.
View Solution.

Hi everyone. I think I have found a solution to this problem. Short background story, I too tried to install Windows 10 (10049) via Windows Update but I was never successful - got stuck at around 30% for more than an hour. I tried to restore to 8.1 but it gave me that 0xc000000f error. Luckily I had made a recovery image to USB before updating to Windows 10.
Please note that by doing this method, you will obviously lose your data.
Here's what you'll need:
- Recovery USB (if you don't have one, grab it from this link and I thank you that person from another post). Follow the instructions, this is just basically clean, format to FAT32, set primary and active, and then drag and drop the files and folders from the USB folder to the root USB drive. This particular recovery is from a 5701 model, there is actually no difference between Stream 7 models in terms of hardware, but software is configured differently (different language setup/format) depending on the country/region it's sold.
- OTG cable
- Powered USB hub
- USB Mouse and Keyboard
- A moment of your time
1. Plug in the OTG cable to the tablet, and then plug in the USB hub to power and to the OTG. After that, plug in the USB mouse and keyboard and Recovery USB to the USB hub.
2. Boot the tablet to BIOS by holding down Power + Volume Down at the same time, until you reach the Startup Menu.
3. Press F10 and navigate to System Configuration > Boot Options. In this menu, we'll have to restore the settings to default.
So if you have disabled Secure Boot, you first need to Clear All Secure Boot Keys and then Load HP Factory Default Keys. Then enable Secure Boot.
Make sure UEFI Boot Order is also default to as follows: OS boot Manager, USB Diskette, USB CD/DVD, Network Adapter.
If you did not make any changes, proceed to 4.
4. Be prepared to go back to the Startup Menu, because as soon as you press F10 and hit Yes, the tablet will automatically restart. So press and hold the Volume Down button after you hit on Yes.
5. Press F9 and select Boot From EFI File. If you've done the recovery image ghosting correctly onto the Recovery USB, you should see two entries. One should be RECOVERY and the other may depend (it could be SYSTEM or No label). Select RECOVERY, and then select bootmgr.efi.
At this point the tablet will boot off from the USB and will bring you to Windows Recovery.
6. Select your keyboard layout, and navigate to Troubleshoot > Reset your PC.
If the drive partition/boot manager is not damaged, it will ask for a recovery key. You can actually skip this step and hide the numpad, revealing the option Skip this drive if you don't have the recovery key anymore, or just really want to start anew.
If the drive partition/boot manager is damaged, the Reset will proceed and will ask you to select a target operating system. In my case it was Windows 8.1.
7. The next screen will be about Reset your PC telling you what's going to happen. Tap Yes > Yes, repartition the drives > Fully clean the drive > Reset.
The tablet will now do its thing and restore to factory default.
After restoration, a BIOS screen will come up asking if you want to clear the TPM keys. Select Yes, and this will create a new key for the restored installation, bringing you back to a fully factory default tablet.
Notes:
I recommend not installing a generic Windows 8.1 ISO that is copied straight to the USB drive using the Windows 7 USB/DVD Tool or RUFUS. They won't be compressed or the same as WIMBOOT, which will take up more storage space than stock recovery.
You could actually install another version of Windows 8.1 on the tablet, assuming you know what you are doing (ie. making a WIMBOOT image).
You could also actually install Windows Technical Preview directly, again, assuming you know what you are doing.
This is just a guide to help you try recover your tablet from a failed Technical Preview installation. I hold no responsiblities over your actions.
What I recommend is that use 8.1 for now, and wait for the official release (or at least a more stable Technical Preview release for this tablet if you can't wait that long) of Windows 10.

Laptop logos but doesn't boot

hello,when i switch on my PROBOOK 4330S laptop it shows the hp logo ,then again repeatedly shows the same... please solve my problem because all my files are strucked in laptop..

I'm using HP655,it's on whenever I swith it on but doesn't boot or ask me my password.All I see is "startup Menu,f1-system information,f2-system diagnostics,f9-boot device options,f10-bios setup,f11-system recovery
Enter-continue Startup...."
And if I press Enter button it doesn't work.What do I do to solve this problem?

[SOLVED] systemd 207, lvm2 and luks booting issue

Hi
i'm using an encrypted lvm (luks) on my notebook.
/boot on /dev/sda1
lvm on /dev/sda2
main-root
main-home
main-swap
since the systemd 207 upgrade i am unable to boot my system.
this error appears at startup:
A start job is running for dev-mapper-main\x2droot.device
so i'm guessing that systemd is unable to use the encrypted lvm2, since this error is aknowledged on the
after checking some threads i tried:
mkinitcpio -p linux
but there was no effect.
HOOKS="base systemd autodetect block keymap encrypt lvm2 filesystems fsck vbox
some people tried suggesting downgrading to systemd 204 but i dont have any pkg file and building with abs leads to the following error
while makepkg -s:
==> Starting prepare()...
patching file src/core/swap.c
Hunk #1 FAILED at 220.
1 out of 1 hunk FAILED -- saving rejects to file src/core/swap.c.rej
==> ERROR: A failure occured in prepare().
Aborting...
am i supposed to remove the patches from the build? i'm not really sure and more of a beginner in this area.
Can anyone help me solve either the build or the boot issue ?
i should mention that i am only able to access my system by using chroot from an arch boot stick.
Thank you so much.
Kind Regards
Last edited by ziv667 (2013-10-01 11:27:06)

https://wiki.archlinux.org/index.php/Mk … mmon_hooks
systemd: This will install a basic systemd setup in your initramfs, and is meant to replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks (like encryption) would need to be ported, and may not work as intended. As of systemd 207, this hook does not work as intended when combined with lvm2 and may break your boot. You also may wish to still include the 'base' hook (before this hook) to ensure that a rescue shell exists on your initramfs.
Have you tried keeping udev instead of replacing it with systemd hook?
Have you tried https://wiki.archlinux.org/index.php/Ar … ck_Machine ? It has systemd 204.
Last edited by karol (2013-10-01 11:16:57)

Why KDE doesn't init if dhcpcd is running?

Hello, I have had a problem that was the following:
1- I start KDE.
2- I connect to wireless using dhcpcd.
3- I logout and come in KDE again and KDE doesn't work.
The solution for this problem was adding "ifconfig lo up" to rc.local, but I can't understand why dhcpcd makes KDE stop working.
Can anyone explain me the reasons?
If you need more information, please tell it to me and I will post it.
Greetings.

Network section:
lo="lo 127.0.0.1"
eth0="dhcp"
eth1="dhcp"
INTERFACES=(lo eth0 eth1)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
Daemon Section:
DAEMONS=(syslog-ng !network hal hwd @alsa ipw3945d !dhcdbd !networkmanager !fam autowifi !autofs @laptop-mode kdm !gdm !entranced !netfs !crond)
Greetings

Z77a gd65 doesn't boot/power off

Hello,
I have a problem with my z77a gd65. It doesn't boot anymore. Each time I need to clear CMOS. Also when I do a shutdown or restart it doesn't respond anymore. (all leds on motherboard are off except the first one of the CPU_PHASE leds). Shutdown or restart have the same effect when i try them in windows or bios, even the buttons on the board have the same results. Only the fans keep spinning. It doesn't power off anymore, I need to unplug the power cord.
It has worked for over 2 months, it just happened yesterday. I haven't installed or changed anything that day.
I haven't overclocked the mainboard.
I tried the latest BIOS version, but this didn't solved the problem
I removed all other hardware (videocard, hdd, dvd,...) but still same problem
Any suggestions
thanks

Quote from: juikel on 03-December-12, 20:08:21
I've contacted the store and they replaced the board.
Thanks for your time flobelix!
Does that mean the system is now fixed and working?

Nokia N9 doesn't boot

Hi,
after just a few days of purchasing my N9 it got stuck to a boot loop which was solved by letting the battery drain and recharging it, worked like a charm after that for a few days
Now, after a couple of weeks, the device is compeletly dead,even the charging LED doesn't work while plugged in.
I've tried the solutions on this thread but nothing works.
/t5/Maemo-and-MeeGo-Devices/Nokia-N9-doesn-t-boot/td-p/1168149

Hi valmerity,
Sorry about the circumstances of your first post but a welcome the discussion forums.
So just clarify you have tried charging the device and also tried holding the power button down for 8 seconds?
Have you tried charging the device via the PC? If you install the Nokia link application on your P.C, connect your device and start the program and leave this for a few minutes. The program may get the device back on. You can download Nokia link from the below hyperlink:
http://europe.nokia.com/support/product-support/nokia-link
Or using the Nokia Software updater program try reinstalling the software. You can find this program on the below link:
http://europe.nokia.com/support/product-support/device-software-update
Also have a look at the following thread also:
http://discussions.europe.nokia.com/t5/Maemo-and-MeeGo-Devices/N9-not-booting/m-p/1257375#M31381
A few people have had similar issues and have manage to resolve it.
Alternatively you may need to visit one of our Nokia care points if none of the above helps. If you click on the below link you can find your nearest care point:
http://mea.nokia.com/find-a-store-en/store-locator/application-container?storelocator_content_countr...
Let me know how goes! Hopefully one of the above methods will help breath life into your phone once again!
Good Luck!
Regards
Raoul_Duke
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

SnowLeopard, Update, doesn't boot.

I have a Mac mini Model A1176, awesome computer till recently. I updated the OS and upon reboot it doesn't boot up. So i tried the following. .
1. unplugged everything let it set for 10 min or so. plugged the power and monitor in (bluetooth keyboard mouse) still doesn't boot, i dont think the problem is in my external devices.
2. target boot into an external hard drive. ran leopard and backed up my user file. The system booted just fine with the external, everything worked, i dont think its the logic board.
3. reinstalled snow leopard and everything was working fine on the fresh install. (i also dont think its the hard drive sense it formatted and installed fine) I updated just the core system update and when it restarts it doesn't boot up. Starts normally, goes to the apple screen with the little loading icon spinning, then it flashes blue (like leopard before it boots) then it goes back to the apple screen with the loading icon and it freezes.
4. The computer booted up fine before i updated, Im pretty much lost. I would like to run the latest updates, we use this mini as a family media center. Any suggestions on to what i should do?

You could try a reset. Unplug everything except a PC key board connected to the USB port and monitor.
Hold the power button in for about 5-8 seconds until you hear a loud bong then a small bong.
If that doesn't work try this.
1. Unplug all cables from the computer, including the power cord.
2. Wait 10 seconds.
3. Plug in the power cord while simultaneously pressing and holding the power button on the back of the computer.
4. Let go of the power button.
5. Press the power button once more to start up your Mac mini.
If that doesn't work your HD partitions may be corrupted. Boot up the mac mini with the Install disk in the CD-ROM and with a PC keyboard connected via the USB port hold down the "c" key then press the power button.
In the install system options menu use the disk utility to check your HD's. Completely repartition the HD with the disk utility then install Mac OS X. If that still doesn't solve the problems you may need to have a new HD installed.
Also with the A1176 you can do a hardware test. Using the original install disks that came with your mac mini (Mine are a Tiger 10.4 Gray CD) start your computer while holding down the "d" key on a PC usb keyboard. When the Hardware tests loads then select extended testing to see if the hardware tests detect any problems.
If you still can't solve the problem you may need to have a specialist look at your computer.

Satellite L850 doesn't boot

Hi, I'm having problems with my L850-150
The thing is it doesn't boot. Power led turns on, Nums Lock led turns on, fan turns on, and nothing more happens, so it's not a power supply problem.
I've been reading in this forum that updating the bios could solve the issue, but as I've seen in the instructions, it seems that the update needs to be done on Windows environment, and as I've said, the computer doesn't boot, so I can't do the BIOS update.
Is there any other solution? Is there any other way to update the BIOS?
Thanks in advance.

Can you please tell us more about your notebook and all you have done last days?
Do you use original OS and factory settings?
Have you done anything that can be responsible for this (software or hardware update/upgrade)?
It is hard to believe that something like this happen for one moment to another without any reason.
You are right, it has nothing to do with power supply, there is something else but on this virtual way it is not easy to offer some precise diagnostic.
In worst case contact nearest Toshiba service provider or your local dealer and ask for help.

Mac pro doesn't boot

hi.
my mac pro doesn't boot. it starts and ceases with a turning wheel (rainbow). any ideas how i can boot. safe boot works normally

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
The commands may line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it. Copy the selected text to the Clipboard (command-C). Then click anywhere in the Terminal window and paste (command-V).
find /Sy*/L*/Ex* -type f -name Info.plist -exec sh -c '/usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$1" 2> /dev/null | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo ${1%*.kext/*}.kext' {} {} \;
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 3
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, these steps are all drag-and-drop or copy-and-paste, whichever you prefer — no typing. Also remember to post the output.
You can then quit Terminal.

K9N Platinum - Doesn't boot with PWR2 connected

Hi,
I've just built a new PC with a K9N Platinum Motherboard (7250 Ver 1.0)
I immediately discovered a problem:
-If I connect to the power supply the PWR2 Molex (the additional power connector on the motherboard, to provide additional power to the video card) the system doesn't boot. Computer's LEDs get on for half a second, then it shuts down.
-If I deconnect the PWR2 connector, computer boots fine.
Bios already flashed to 1.51... no results.
It sounds weird to me. I have an Enermax Noisetaker II 485W PSU, the CPU is an Athlon X2 65W...
Have I got a damaged mainboard?
Thanks for support

Quote from: WillyTP on 15-February-07, 05:36:01
Just tried... nothing. Lights and fans turns on for half a second, then everything dies.
I tried to remove video card too, nothing changes :(
sound like somethink is shorted. try take board of case and retry. it maybe dumb question, but are you connect 4pin cable in a right direction?(i know its can be plugged in one way only, but if you use little more force can be done...)

My mac is slow, crashes if iPhoto is opened, doesn't boot sometimes

Hello.
In the last time, my MacBook Pro is very slow and crashes sometimes if I open iPhoto or some other programs.
Sometimes, there comes a black display with some thin white lines and then I have to restart the computer.
Also, sometimes the mac doesn't boot right (you see only a grey display after the apple symbole).
I already repaired the system with Disk Utility and erased it to install a backup of my system.
Thank you for your help!
Best regards....
Here is the EtreCheck result:
EtreCheck version: 1.9.15 (52)
Report generated 27. September 2014 17:42:12 MESZ
Hardware Information: ?
MacBook Pro (15-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,2
1 2.4 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
Video Information: ?
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1680 x 1050
AMD Radeon HD 6770M - VRAM: 1024 MB
System Software: ?
OS X 10.9.5 (13F34) - Uptime: 0 days 0:5:31
Disk Information: ?
APPLE SSD TS128C disk0 : (121,33 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted>: 209,7 MB
Macintosh HD (disk0s2) / [Startup]: 120,47 GB (14,71 GB free) (Low!)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R   UJ-8A8
USB Information: ?
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ?
Apple Inc. thunderbolt_bus
Gatekeeper: ?
Mac App Store and identified developers
Kernel Extensions: ?
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMControl (3.0.15) Support
[not loaded] com.NovatelWireless.driver.NovatelWirelessUSBCDCECMData (3.0.15) Support
[not loaded] com.ZTE.driver.ZTEUSBCDCACMData (1.3.8) Support
[not loaded] com.ZTE.driver.ZTEUSBMassStorageFilter (1.3.8) Support
[not loaded] com.novatelwireless.driver.3G (3.0.15) Support
[not loaded] com.novatelwireless.driver.3GData (3.0.15) Support
[not loaded] com.novatelwireless.driver.DisableAutoInstall (3.0.15) Support
[not loaded] com.novatelwireless.driver.NWVBE (3.0.15) Support
[not loaded] com.novatelwireless.kext.wwan (3.0.15) Support
[not loaded] com.option.driver.OptionHS (3.31.0) Support
[not loaded] com.option.driver.OptionMSD (1.22.0) Support
[not loaded] com.sierrawireless.driver.SierraDIPSupport (1.0.0) Support
[not loaded] com.sierrawireless.driver.SierraDevSupport (1.0.7) Support
[not loaded] com.sierrawireless.driver.SierraFSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraHSRSupport (3.0.0) Support
[not loaded] com.sierrawireless.driver.SierraIPDirect (1.1.3) Support
Startup Items: ?
ChmodBPF: Path: /Library/StartupItems/ChmodBPF
HP IO: Path: /Library/StartupItems/HP IO
Launch Daemons: ?
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.sierrawireless.SWoCTool.plist Support
User Launch Agents: ?
[failed] com.adobe.ARM.[...].plist Support
[failed] com.facebook.videochat.[redacted].plist Support
[failed] com.google.keystone.agent.plist Support
User Login Items: ?
MediaCentral Launcher
ChaxHelperApp
TheTube Helper
fuspredownloader
HP Scheduler
Internet Plug-ins: ?
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 3.1.0.24   - SDK 10.8 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
CouponPrinter-FireFox: Version: Version 1.1.5
FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
DivXBrowserPlugin: Version: 1.4 Support
Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SharePointBrowserPlugin: Version: 14.2.2 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 45 Check version
Audio Plug-ins: ?
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
DivX Support
Flash Player Support
Flip4Mac WMV Support
MediaCentral Support
Time Machine: ?
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 112.20 GB Disk used: 98.50 GB
Destinations:
Data [Network] (Last used)
Total size: 2 TB
Total number of backups: 24
Oldest backup: ********
Last backup: *****
Size of backup disk: Excellent
Backup size 2 TB > (Disk size 112.20 GB X 3)
Time Machine details may not be accurate.
All volumes being backed up may not be listed.
Top Processes by CPU: ?
      4% WindowServer
      1% fontd
      0% mtmd
      0% Activity Monitor
      0% ps
Top Processes by Memory: ?
242 MB Safari
106 MB com.apple.IconServicesAgent
102 MB mds_stores
102 MB WindowServer
82 MB Mail
Virtual Memory Information: ?
151 MB Free RAM
1.47 GB Active RAM
1.34 GB Inactive RAM
1.04 GB Wired RAM
554 MB Page-ins
0 B Page-outs

Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. You may have to leave the machine there for several days.
Back up all data on the internal drive(s) before you hand over your computer to anyone. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you have at least two complete, independent backups, and you know how to restore to an empty drive from any of them.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

[SOLVED] Downgrading networkmanager KDE doesn't boot/no connection

Similar Messages

Maybe you are looking for