[Solved]Dropbox does´n connect

Dear Arch-users,
I´m a big fan of dropbox but with a new install on an older laptop it doesn't seem to start.
Normal behavior:
Install start dropbox wait couple of seconds en it will pop-up a window asking me to log in.
Behavior right now :
Try to start it but I only get an tray icon. Clicking on it just gave me an error
Kon URI 'file:///home/wilco/Dropbox' niet openen.
Fout bij het verkrijgen van informatie over het bestand ‘/home/wilco/Dropbox’: Bestand of map bestaat niet.
In English its something like: (I'll change my locale.conf in a minute to get the orginal translation).
Couln´t resolve[or open][or path] file://home/wilco/Dropbox
Error resolving information about the file /home/wilco/Dropbox map or file doesn't exist
Things I tried:
Delete ~/.dropbox
Delete dropbox from my laptop en re-install
Relevant info
32 bits installation
XFCE desktop environment
Thunar
Thunar-dropbox and dropbox both installed via AUR
Any suggestions or somebody who struggled with the same problems?
Last edited by Xacky (2014-02-19 22:21:49)

karol wrote:
○ ● ○ wrote:
ls -l $HOME | grep Dropbox
What is the output?
I think a better way is to
find ~ -maxdepth 1 -iname "*dropbox*"
@Xacky
Read the comments by cedricmc https://aur.archlinux.org/packages/dropbox/
That did the trick <3 .
The last time I checked the Aur-comments was in the late midday, so I missed that one. Thnx for pointing it out!!!

Similar Messages

  • [SOLVED] NetworkManager does not connect to WiFi networks

    I'm using `networkmanager` to connect WiFi.
    I have selected WiFi Name through `networkmanager`.
    Next, enter WiFi Password.
    But the problem is, `networkmanager` asks me about password again and again and over again and does not connect to WiFi never !!!!
    I'm sure WiFi password that I entered is correct.
    Last edited by kamrava (2014-02-22 05:46:37)

    orschiro wrote:Maybe not satisfying, but can you instead use Wicd?
    My problem was solved. `wicd` was not installed on my system.
    My Problem solved through :
    I have Installed `wicd` and then NetworkManager works like a charm now
    $ sudo pacman -S wicd wicd-gtk
    Thank you all.
    Last edited by kamrava (2014-02-21 11:29:17)

  • [Solved] NetworkManager does not connect wlan interface to my WLAN

    Hi,
    I don't know what I am missing. Connecting to my WLAN using wifi-menu does work fine. But if I try to use nm-applet it doesn't connect (see journalctl below)
    I use i3 as a GUI and enabled its tray. I can see the nm-applet but its loading forever without connectivity.
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0/wireless): connection '<My ESSID>' has security, and secrets exist. No new secrets needed.
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'ssid' value '<My ESSID>'
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'scan_ssid' value '1'
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'auth_alg' value 'OPEN'
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'psk' value '<omitted>'
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: set interface ap_scan to 1
    Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: inactive -> scanning
    Mar 29 14:03:22 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:22 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:22 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
    Mar 29 14:03:22 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
    Mar 29 14:03:26 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:26 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:26 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
    Mar 29 14:03:26 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
    Mar 29 14:03:29 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:29 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:29 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
    Mar 29 14:03:30 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
    Mar 29 14:03:34 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:34 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:34 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
    Mar 29 14:03:39 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
    Mar 29 14:03:42 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:42 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:42 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
    Mar 29 14:03:44 <hostname> NetworkManager[3024]: <warn> Activation (wlp3s0/wireless): association took too long, failing activation.
    Mar 29 14:03:44 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: config -> failed (reason 'SSID not found') [50 120 53]
    Mar 29 14:03:44 <hostname> NetworkManager[3024]: <warn> Activation (wlp3s0) failed for connection '<My ESSID>'
    Mar 29 14:03:45 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
    Mar 29 14:03:45 <hostname> NetworkManager[3024]: <info> (wlp3s0): deactivating device (reason 'none') [0]
    Mar 29 14:03:48 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
    Mar 29 14:03:48 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
    Mar 29 14:04:05 <hostname> systemd[1]: Stopping Network Manager...
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> caught signal 15, shutting down normally.
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (enp0s25): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (enp0s25): cleaning up...
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (enp0s25): taking down device.
    Mar 29 14:04:05 <hostname> kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (wlp3s0): cleaning up...
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (wlp3s0): taking down device.
    Mar 29 14:04:05 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=3)
    Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> exiting (success)
    I would be really glad if you could help me.
    Best regards,
    Christian
    Last edited by Watnuss (2013-03-29 13:58:40)

    Watnuss wrote:Ok I found the issue. net-auto-wireless was started automatically and thus NetworkManager couldn't be started properly. Disabling net-auto-wireless and enabling NetworkManager worked for me.
    Don't worry, I have done this before too.  It is horribly frustrating until you realize the problem, at which time I always think, "Ah crap, I need to pay attention to what I'm doing more..."

  • [SOLVED] Dropbox does not start

    Hi,
    I just installed Dropbox on archlinux under XFCE4. If I run the application from the menu nothing happens, but the instance of dropbox exists (I see it from the task manager). I don't see an icon tray either. The same happens if I try to run Dropbox from terminal.
    Last edited by deathconscious (2015-03-09 20:47:31)

    I tried the procedure in the post you linked. I downloaded the package, replaced the version in the PKGBUILD and ran makepkg -g. When I run makepkg -f I get the error
    [mattia@maxwell dropbox]$ makepkg -f
    ==> Making package: dropbox 2.10.52-1 (Mon Mar 9 21:30:05 CET 2015)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving sources...
    -> Found dropbox.png
    -> Found dropbox.desktop
    -> Found terms.txt
    -> Found dropbox.service
    -> Found [email protected]
    -> Found dropbox-lnx.x86_64-2.10.52.tar.gz
    ==> Validating source files with sha256sums...
    dropbox.png ... Passed
    dropbox.desktop ... Passed
    terms.txt ... Passed
    dropbox.service ... Passed
    [email protected] ... Passed
    ==> Validating source files with sha256sums...
    dropbox-lnx.x86_64-2.10.52.tar.gz ... FAILED
    ==> ERROR: One or more files did not pass the validity check!
    EDIT: Sorry again, I posted without reading carefully. I actually DIDN'T do what as instructed. It works perfectly now, thanks again.
    Last edited by deathconscious (2015-03-09 20:45:01)

  • My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

    My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

    Please sign out of FaceTime and sign back in. If there's no change, log out or restart the computer and try again.

  • Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service

    Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service"  almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
    I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
    Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
    I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
    I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
    I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
    Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
    By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
    Thanks
    James
    Thanks
    James

    Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • [SOLVED] Empathy does not work after gnome upgrade

    Hey there,
    I have upgraded gnome from 2.26 to 2.28. Almost everything is perfect (in fact apps start faster than before) but empathy does not connect to msn or any other protocol.
    Any help would be appreciated.
    Tks
    Last edited by mmf1902 (2009-10-17 17:48:07)

    mmf1902 wrote:
    So now we have solved the problem:
    + I deleted all hidden folders and configuration files that belongs to empathy and telepathy
    + I deleted the mission-control folder
    And that's it. Everything is ok.
    Gracias mil.
    don't forget to mark the topic as solved
    p.s. did you check the permissions or did you just remove the files? for other people with the problem, you know.

  • I have a ipad 2 and it does not connect with safari using 3G

    I have a ipad 2 and it does not connect with safari using 3G

    Sorry to hear you are having issues, but there are 2 ways you can print from that device.
    The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
    The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • Bug typedef does not connect to expression node

    Attached is a simple vi that tries to connect a typedef (in this case a double) to an expression node.
    Since LV8 this is not allowed anymore.
    We choose LabVIEW because it was possible to use it as a strict typed language. (one of the reasons).
    We see that the developers go a long way to make the language so easy that it is too strict to allow typedefinitions to an expression node.
    But it can also be a slip of the compiler of course.
    attached are the example vi and the typedef.
    please supply a patch because this makes it impossible for us to switch to LV8
    greetings from the Netherlands
    Albert Geven
    greetings from the Netherlands
    Attachments:
    typedef does not connect to expression node.vi ‏7 KB
    dbl typedef.ctl ‏5 KB

    A workaround is easy but should not be necessary because the typedef is used to keep it a typedef.
    Simply use an explicit type conversion in this case to [DBL], at least that was my guess....
    but an explicit conversion already knows there is nothing to do so it does not help.
    A typecast helps but sure that is not what I want, see picture below.
    greetings from the Netherlands
    Attachments:
    typedef bug not solved by explicit conversion.JPG ‏5 KB

  • Dropbox does not show up as an option for "Save As" as OneDrive does (came preinstalled that way).

    Dropbox does not show up as an option for "Save As" as OneDrive does (came preinstalled that way).  Dropbox is installed but I had to use Selective Sync since the Stream only comes with a 30GB drive and my Dropbox account is 1TB.

    Hi @gatesoui ,
    Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Stream Notebook and issue with DropBox. Here is the support site for Dropbox.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • My Z10 does not connect

    Hi Z10 does not connect to my system Win7 Link is downloaded and it shows my z10 as connected but it does not allow me to sync it keeps asking for reconnect/reload i tried reloading few times none works i need help i am getting frustrated with this

    Please review this thread: 
    Blackberry Link
    and the questions asked, especially my last post in that thread with the three linked KB articles.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have updated my macbook air to OS X Yosemite. Now my computer does not connect with my HP printer 1300. What do I need to do to resolve this problem?

    Hello,
    I have recently updated my mac book air to OS X Yosemite. Now my mac book air does not connect with my HP Laserjet 1300 printer. Can you please tell me what to do to solve this problem?
    Thank you very much.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

  • FaceTime on Mac (Yosemite) does not connect when calling an IOS device

    Hi all,
    Since my upgrade with Yosemite, I seem to be having issues with FaceTime (video/audio) calling iOS Devices. iMessage works just fine with Yosemite. But when i attempt to call the other party via FaceTime, i could hear it ring but cannot connect. Anybody else who has the same issue and does anybody know how to fix it? It would seem to be a Yosemite issue, because when i tried using my iPad and iPhone to call via FaceTime, it works just fine using the same Apple Id i used for the Macbook Pro (Mid 2010). But when I use my Mac to call the iPhone.. It rings but it does not connect.. I hope they fix this with the next update..

    For the ones who are interested: the problem has been "solved".
    Solution: none. I found out that the iPhone 4 from my girlfriend caused the problem. The iPhone made it impossible to FaceTime to each other from iPhone <> MacBook Pro. I think it's because the discontinued iOS support for the iPhone 4.
    Since she has the iPhone 6 FaceTime now works wonderful without any problem.

  • My computer does not connect anymore to my airport express

    i have an airport express for years and since a few days my computer manages less and less to connect to it. it sees it in the available networks but it does not connect to it automatically and when i try to join it with my password it fails to connect as well. when i go to the airport utility and scan for available devices it does not find it. i can connect through a direct ethernet cable to my cable modem so it's not my internet provider the problem. when i turn on the computer it sometimes gives me the signal that the airport device is on (the little fan) but as soon as i open a browser it greys with a little exclamation mark.
    any thoughts on what i could do? would a factory settings restore solve the problem (last resort as i would have to remember all the right settings that have to do with my internet provider plus passwords for station and joining networks, grrr)?

    Aimée Z. wrote:
    since a few days my computer manages less and less to connect to it.
    If you unplug the AirPort Express, wait a short time, then plug it back in, does it work better (at least for a while)?
    would a factory settings restore solve the problem
    If you can get AirPort Utility to recognize it at all, use the menu option File -> Export Configuration File to save the configuration settings. Then you can do a factory reset followed by File - Import Configuration File to reload those settings.
    There's a chance that it would help to reset the connection settings on your Mac using these steps one at a time until it works again, recognizing that, depending on your problem, not all of these steps will make sense:
    1) Use the AirPort menu bar item to turn AirPort off, then on again.
    2) Try to select your Wi-Fi network from the AirPort menu.
    3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
    4) In the same panel as (3), define a new location and see if you can make that work.
    5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
    6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
    They may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Maybe you are looking for

  • I can not  install apps in my new ipod touch ios 6

    i can not  install apps in my new ipod touch ios 6 it is showing appication is failed to installed why is this happening can any one help me....

  • Pointer to void != pointer to function

    Hello C experts, this is a simple question about SunStudio's understanding of function pointers (it might have been asked before): Why is the following C code giving me a warning on all Sun compilers: # cat funcptr.c int main() {     void (*func)() =

  • Filter query based on a value from a drop down menu

    I am using ADFBC/JDev 10.1.3/ADF-faces (JSPX) I would like to display a table of data based on a view object and have a drop down menu of values that the user can select from which would filter the table of data. The filter would be applied to a fiel

  • Repository variable syntax

    What is the syntax for calling a rep variable in Answers? Using the "@{<variable_name>}" format described in the Answers documentation, I am unable to display the values of Repository Variabes (like "CURRENT_QTR") on reports.

  • Query on Oracle Entitlement Server

    Hi All, I am new to OES and i am keen to know whether OES can be used to protect database columns and rows. If it is how can we do that.. Thanks bh