[SOLVED!] DVDRW can't burn on JMicron IDE (MSI P965 Neo)

-----------------------------
edit: i have solved it! i changed my IDE cable (i originally used the IDE cable that came with my dvd-drive, which was a 40pin IDE cable) with the 80pin IDE cable that came with the motherboard. installed jmicron driver, and i can burn now. no more errors from nero
I have an LG GSA-H10N DVD writer.
it's connected on the only IDE slot in MSI P965 Neo motherboard.
Nero Express log file says:
=== Scsi-Device-Map ===
DiskPeripheral : ST380811AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10N JL10 JRAID Port 4 ID 0 DMA: Off
i asked around, DMA should be turned on, says all other forums.
Jmicron RAID controller is installed. all jmicron drivers installed.
how to turn on DMA?
bios is set to IDE (and not RAID/Disabled).
please help. this is giving me headaches. i have lost money thinking i bought defective dvds to burn on, only to find out DMA is not ON (and i can't turn it on anywhere).

I wouldn't call this "solved" would you? Mabe patched...
Yes I am having the same problem:
If I use the Intel IDE drivers, you *can* burn, but it takes literally at least an hour MIN per DVD. Also it maxes out @ 6X for ripping audio CDs. Yes, and this cripples your entire system, everything is super slow, even the mouse is choppy. One of your CPU's will also be maxed out @ 100%. Sound may be also affected while using any DVD drive.
If I use the "latest" 1.14 JMicron Drivers, I can't burn at all. Windows "says" it's a DVDRW, but there is no burn tab under properties, and Nero or other applications say there is no burner (but the "virtual" ISO burner). However, I can rip at full speed again, no choppy, so sound issues.
Here is a picture of what Device Manager looks like BEFORE you install JMicron Drivers and AFTER:
http://www.hificomputers.net/hifi/Images/before_after.jpg
I Have tried messing with PIO modes and DMA in bios and windows. Nothing.
I have tried messing with DVD burner's firmware, nothing.
I have tried editing the registry and "forcing" windows to see the DVD Burner as a burner to FORCE the "burning" tab to come back, but still this doesn't affect anything. Still can't burn.
MSI do NOT use JCrapon again! Just search for jmicron in this forum and see all the problems with them! I've had at least 6 MSI boards and this is the first one I've not been satisfied with just because of JMicron. I don't know if this is a Bios fixable issue, but it seems like it should be a JMicron Drivers issue.
Harass JMicron Here:
(tech support email )
[email protected]
Keep me posted.
September 23

Similar Messages

MSI P965 Neo-F Sata & IDE presentation (& boot options)

hi,
I have purchased a MSI P965 Neo F motherboard.
http://www.msicomputer.co.uk/Product...3735&cat_id=77
I have flashed the bios to the lastest 1.18 revision.
If you look at this board, you'll find it has 5 SATA ports.
- 1 SATAII port by JMicron JMB361.
- 4 SATAII ports by ICH8.
Questions:
1.) The machine only appears to be able to boot from the 1 jmicron sata port.
2.) within the bios any disks plugged into the board on the other 4 ports show up as "ide" disks, this could be wording or this could be some cheap bus trick

Hi, thanks for responding,
Quote
no wrong with "ide", as SATA ports on ICH8 are detected as IDE devices, (as opposed to detected as SCSI device).
could you clarify this, I think its just the "no wrong" line, what do you mean by this.
Quote
No, the machine is able to boot from any JMicron port, including PATA port.
there is only 1 jmicron sata port, so my initial comment was aimed at you can only boot from this 1 sata port - not the other 4 ich8 ports, I assume thats correct from your comment.

Can i get MSI P965 Neo (MS-7235) for 1333fsb support by updating bios?

Hi,
Im new in this forum hope this is right place to ask this.
I got motherboard: MSI P965 Neo (MS-7235)
So it only supports 1066fsb?
I have e6850 processor, so can i get this motherboard to support that processor by updating bios?
according to this msi.com
it says fsb 1333, why?
cpu-upgrade.com
this site says 1066....

Quote from: duudeli111 on 13-September-14, 03:54:54
according to this msi.com
it says fsb 1333, why?
http://www.msi.com/product/mb/P965_Neo.html#hero-specification
• Supports FSB 1066/800 MHz
http://ark.intel.com/products/27730/Intel-82P965-Memory-Controller
Supported FSBs : 1066MHz

MSI P965 Neo-F IDE Not detected

Hello, i recently installed my p965 with my sata2 hdd, ide hdd and dvdrw, but these last two dont appear in bios, and i do need them to be booted so i can install new OS, i dunno if this is a repeated topic, unfortunatly i searched and no other topic helped me, so i was hoping someone could help me solving this problem.
Thanks

Connect the SATA drive to one of the Intel controllers (SATA ports 2-5). that way you will be able to see your drive in BIOS. Anything that you'll connect to the IDE controller(witch is controlled by third party controller from Jmicron) wont be shown in the main BIOS, because main BIOS only contains devices that are controlled by Intel southbridge. And that's why you cannot see your DVD/RW and IDE Hard drive in the main BIOS.But with a proper driver installed in windows,this controller works even better then the Intel controllers(better burst rate for the SATA hard drives)
The thing that you should know is that, when you connect two devices with different DMAs on one IDE controller, the controller will set the DMA within the device that have a lower DMA (for example if your IDE hard drive works in UDMA5,and the DVD/RW in UDMA2, both of devices will work in UDMA2, witch will cause low performance for your hard drive, even for your system too). So my advice is that you unplug the IDE HDD,and continue to use only SATA HDD, for better performance.

MSI P965 Neo-F JMicron 361

is there any way to run SATA RAID on this motherboard the controller only support PATA 1x and 1x SATA witch is pretty silly for a RAID function?

http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=744
no RAID ever mentioned ...

P965 Neo-F JMicron IDE concerns

I've always been a big MSI fan and I'd like to build a sytem with a core 2 duo and the P965 Neo-F. However, I've really been scared away by all of the reported difficulties with the JMicron controller. I will have one SATA hard drive and IDE opticals. My question is, have issues with the controller been resolved? Is it possible to get fast DVD read/write speeds with IDE opticals? Is there a method to get things to work properly? Thank you.
DeeJay

Hello,
I to have an MSI P965 Neo-F, from the day I had it and put my rig together I have had NOT one single problem with it at all, my dvdrw was set as master and plugged into the ide connector, my sata hard drive was plugged directly into the purple sata port. I DID NOT install any raid or scsi drivers whilst installing winxp, it installed with no input bar the product code and keyboard setup. I then installed all the drivers that came with the setup cd, which includes the Jmicron drivers. Both xp & drivers took about 25 mins. Once done everything was working fine NO problems or issues, no nothing, even after I updated the drivers using liveupdate still no issues at all.
I'v read that people have had trouble burning cds/dvds, low read speeds, etc... I didn't fiddle with anything in the bios prior to installing xp and I'v had no trouble whatso ever.
I think that this motherboard is tidy, it runs smoothly with no glitches, the overclocking I think is sweet enough without making major changes to your internal cooling. Reading all the bad reviews is enough to put anyone off, but not many people write reviews about how good this motherboard is, so here i am.
MSI P965 Neo-F is a dam fine motherboard. It works solidly and is one of the most stable MB's on the market. If people try not to fiddle too much with bios settings, that includes bets bios flashing, and everything before they set it up, then I think they would be more good reviews.

P965-Neo and jMicron issue

Hi,
I have a strange problem with MSI P965-Neo related to jMicron PATA-IDE (a DVD-RW is connected there).
The system is working just fine:
1) the SATA HDD is recognized in the first BOOT phase and the DVD-RW is recognized in the 2nd boot phase (the jMicron boot phase).
2) WinXP-SP2 has no problems at all with both drives (HDD & DVD)
But ...
In case of DVDs (read) I get no more than 1X speed (approx. 1200KB/sec)
In case of CDs (read) I get no more than 8X (approx. 1200KB/sec).
So the max speed for my optical drive is 1200KB/sec.
At this speed it's obviously that I cannot burn CDs or DVDs ...
There're no reading/writing issues with my optical drive (LG H10N) on other systems.
Is someone able to help me ?
thanks

Quote from: antonis
Set the Jmicron in the BIOS to RAID mode. That worked for me.
Didn't work (but thanks anyway).
The problem is solved now (I had to waste enough time for that ...).
The solution: http://www.dieselbenz.info/JMB36X_WinDrv_Beta_R1.17.04.00.rar
It's a beta driver, but this is the answer to all "jMicron on MSI" bugs.
With that driver I was able to write a full CD at 48X and a full DVD at 8X without any error.
p.s.
A little piece of advice for MSI team:
The current v1.5 BIOS and jMicron driver are buggy (talking about MSI P965-Neo) !
You have to solve this problem as faster as you can because is very annoying and you'll lose customers !
Remus M
(an old MSI fan)

P965 NEO Slow IDE DVD/CD drive

Ok,
I've read some of the articles on problems with CD readers/writers not working or working very slow using this MOBO.
Here is my problem
I have a SATA hd that has my windows xp OS and it works fine. I installed it from the CD rom no problem.
The only problem I have is the CD/DVD rom appears to work very slowly in Windows.
****I am not running any raid devices.****
Should I have to install a JMICRO driver just to get my CD/DVD writer to function properly? I looked for a driver using the links I found in this forum but didn't find any. Im not sure if I even need one.
Has anyone solved this problem that isn't using Raid? I'd rather not install a driver if I do not need it.
Thanks,
JIm

Quote from: gungadin_ on 05-December-06, 04:42:30
After my current install is done I'm going to try this driver that remus suggests. As he had the identical problem I have. I tried that link above but it aimed at a 64bit driver? Not sure about that one if this doesnt work Illl try that one.
The problem is solved now (I had to waste enough time for that ...).
The solution: http://www.dieselbenz.info/JMB36X_WinDrv_Beta_R1.17.04.00.rar
It's a beta driver, but this is the answer to all "jMicron on MSI" bugs.
With that driver I was able to write a full CD at 48X and a full DVD at 8X without any error.
p.s.
A little piece of advice for MSI team:
The current v1.5 BIOS and jMicron driver are buggy (talking about MSI P965-Neo) !
You have to solve this problem as faster as you can because is very annoying and you'll lose customers !
Remus M
(an old MSI fan)
I was seriously bashing my head until I found your post. Even the drivers found on Live Update didn't work. These betas are the shiz. Thanks!

P965 Neo JMicron ?buggy? in PATA-mode and cannot install newest driver

I have a MSI P965 Neo and a PATA HDD (alone on the IDE-cable)
if I copy some big files over network (via onboard realtek) from 2 other computers in my network:
PATA:
a) files are ok (correct md5), without the JMicron-driver 1.06.01.00 from MSI website, but very slow speed and laggy mouse.
b) files are NOT ok, with JMicron-driver 1.06.01.00, speed is fast, mouse are ok.
if I use a PATA-2-SATA adapter from a friend and the HDD is
a) hooked on JMicron-SATA-Port, with JMicron-driver 1.06.01.00, files are ok.
b) hooked on intel-port, files are ok.
I did some tests with a dlink-NIC on msi mobo, but in PATA-mode on JMicron still errors.
so for the JMicron in PATA-mode there is a bug, in SATA-mode not.
I have hope with with the new driver from MSI site vesion 1.14.00.00 but this one won´t install - got a dialog with "updatedriverforplugandplaydevices: error".
any help ? coz I cannot use the PATA-2-SATA adapter from my friend forever and buying one isn´t a big deal but I paid already for not 100% bugfree msi p965 neo.
update:
filecopy from internal hdd to external usb-hdd, is not a problem, only over network. so JMicron in PATA-mode produces errors if realtek-onboard-chip is under load or an other NIC.
OS was WinXP SP2 32bit, but WinXP x64 has the same problem.
I tried also older realtek drivers but no success.
but Vista RC1 has no errors with filecopy over network with jmicron in pata-mode, with Vista´s default drivers for JMicron and realtek-nic

I got the same problem with "HANGING"... the whole system freezes (mouse and sound for example) when I access my DVD burner, e.g. wenn I insert a new DVD, and/or copy a file like VTS_04_1.VOB to my system (just for testing). I never experienced this behaviour in any PC system before... This isn't acceptable on a 2 gig, 6600 core 2 duo system.
I played World of Warcraft recently, and burned a video DVD from a hdd image file at the same time - which should be blindfoldly managed on a core 2 duo 6600.
on my old system (an amd, single core) the same action would have no effect on the game. But on my new MSI board system, there were major hangs to the game... Just when the system accessed the DVD burner.
More strange appears to me, that accessing the second DVD device, the DVD-R (just reading) doesn't cause any hangs to my system.
I never had any of this occurences in any PC before ... This must have something to do with the Jmicron IDE to SATA2 "bridge".
I got the JMB36X 1.14.01.exe and the latest BIOS
My system specifications read as follows:
1x 3R Systems DCase R202, silver be quiet
1x SilentMaxx 480Watts, 19dB extra silent
1x MSI P965 Neo-F Socket775, FSB800/1066 ATX PCI-E16x
2x CSX1024MB DDR2 DIMM, 800MHz, original Value
1x Core 2 Duo E6600 (2,4GHz 4MB), Box S775
1x GeForce 7900 GTX 512 MB Gigabyte, TV-Out/DVI Retail
2x SATA2 250GB Samsung SP2504C
1x LG GSA-H20L Black Lightscribe, Retail Nero+Kabel
1x Lite-ON DVD-ROM SHD-16H5S-05C, 16X
Hoping there will be a fix soon... I noticed this strange behaviour at once, when I installed Heroes of Might and Magic V (just after I bought my new system) and wondered, why the installation routine takes SOOOO long and consumes one core cpu completely....
Regards,
chingom

Where can I get a new i/o-shield for my P965 Neo-F V2 motherboard?

I need an i/o-shield for MSI P965 Neo-F V2 motherboard.
I live in Finland, I've asked from local stores but nobody sells them separately.
Anybody knows where to acquire one? (it can be from another motherboard too, if it's exactly like the one that comes with Neo-F V2).
Any help would be greatly appreciated, thank you.

I found this place---> http://www.censuspc.com/Back-Panel-I-O-Shields-c-39.html which ships internationally(no international Credit Cards though--does accept PayPal). Take a look at the shields they have to see if any have the right cutouts. I remember Intel selling a ton of different I/O shields and maybe one of those will work, but I haven't found the link yet. Try contacting the MSI office in your area and see they can help.
Edit: I found it! Here's a link with illustrations of various Intel I/O shields: http://www.intel.com/support/motherboards/desktop/sb/cs-009031.htm
Here's the link with the I/O shields for purchase: http://shop.intel.com/shop/category.asp?category%5Fid=94
Here's the link for different delivery locations: http://shop.intel.com/shop/countryselector.asp

I can't burn a playlist to a disc, it comes up with no supported disc burners found, any ideas, i can't burn a playlist to a disc, it comes up with no supported disc burners found, any ideas

i can't burn a playlist to a disc from itunes, it comes up with no supported disc burners found, any ideas?

Additional information:
-also ran "Repair" with new download of iTunes
-am using the same spindle of CDs that worked perfectly a month ago. Tried another brand also to be safe. None worked.
-ran CD/DVD diagnostics within iTunes with Apple Care - no issues apparent
-also tried write-speed 20X on advice of Apple Care (don't know why they thought 20X would be the magic number after the other 3 I tried didn't work)
-tried running itunes in another user account on the computer - same problem, same error code
-Apple suggested it was a copyright issue. I can't even burn music that I created/recorded myself, so that doesn't make sense.
-They thought maybe Quicktime wasn't installed properly, so we checked a film in Windows Media - it played, meaning Quicktime was fine apparently.
Solution:
Unclicked CD text option & Sound Check, ran burn from the File drop down menu (max speed) on a Philips CD-R and it worked! Had been right clicking the playlist name and selecting Burn option from there. That being said, it did not work on 2 other brands prior, with same settings. Not sure why. Just happy it's working again. Is it a brand issue?

When I try to burn cd's I get the message 'cancelling disc burn' and an error code '4280', also I can't burn cd's on WMP all this has started after I upgraded, any ideas?

Since I upgraded to the latest version of itunes I can't burn discs, I just get the message 'cancelling burn' with error code '4280', it was working fine before I upgraded, I am using Windows XP, any ideas?

Many thanks for the diagnostics.
Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
With that one, I'd start with solution 3 from the following document:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install

Can't burn a cd from elements 9 any ideas?

Can't burn a cd from elements 9 any ideas?
The problem seems to be that it will not display my devices for selection,

On a mac you can send the photos to imovie, iphoto, or iDVD if you have that. The only kind of video disc PSE can make (on either platform) is the horrible VCD format, which was never very good and is fast becoming obsolete. It's getting harder to find dvd players that can read that format.

I can't burn cd's on itunes or windows media player any ideas or solutions?

I can't burn cd's on itunes or windows media player no matter what I do.An error 4450 appears in itunes when I try to burn a cd.Also some cd's won't import properly or some won't import at all.Any suggestions would be most appreciated!I have a dimension 3000 desktop by Dell.

See mckeot answer as to how he/she resolved the 4450 error at the bottom of the following link. I think it may help.
http://discussions.apple.com/thread.jspa?messageID=3391379&#3391379

Can't burn any CD/DVD ?

Hello,
this is my BIG problem :
i have a P965 Neo motherboard + Dual Core E6600 + 2x 1GbDDR2 800 Corsair + 1x Seagate SATA II 320Gb + 1x ASUS DVDRW.
I have BIOS v1.6, and Jmicron v17.08 installed.
In Bios the IDE/RAID control is set to IDE. The IDE busMaster is set to Enabled.
The hard is plugged in SATA 1 ( the blue one).
In control panel the Primary Ide chanel (the hard-disk) is working in UDMA mode 6, and the secondary Ide chanel (the DVDRW) is working in UDMA mode 4.
When i want to burn any CD or DVD with Nero, Roxio or anything else, i have this nice message :
DMA driver error. CRC error. Burn failled. ???
Have someone a clue, because i give up.

Quote from: eftos
In control panel the Primary Ide chanel (the hard-disk) is working in UDMA mode 6, and the secondary Ide chanel (the DVDRW) is working in UDMA mode 4.
When i want to burn any CD or DVD with Nero, Roxio or anything else, i have this nice message :
DMA driver error. CRC error. Burn failled.
Solved !
I change the IDE cable with one of 80 wires.
This is MAGIC !!!
The 80-conductor cable was first defined with the original Ultra DMA modes 0, 1 and 2, covering transfer speeds up to 33.3 MB/s.
The cable is considered "optional" for those modes.
However, for any Ultra DMA modes above mode 2, the 80-conductor cable is mandatory.
cheers

[SOLVED!] DVDRW can't burn on JMicron IDE (MSI P965 Neo)

Similar Messages

Maybe you are looking for