Solved: Dynamic Converter error - Can't get HTML rendition of files

I installed the Dynamic Converter into Content Server on a Linux system, setup the paths to the fonts, and checked-in basic templates, layouts and scripts. When I check-in a new document (word document in this example), I get the following error:
Content Server Request Failed
Unable to get dynamic conversion. Failed to export document 'KAISERDOCTORLIST' using template 'BLANKGUITEMPLATE' and layout 'DEFAULTLAYOUTTEMPLATE'. Export process: 'DCExport'
[ Details ]
intradoc.common.ServiceException: !csFailedToExport,KAISERDOCTORLIST,BLANKGUITEMPLATE,DEFAULTLAYOUTTEMPLATE!$Export process: 'DCExport' at dynamicconverter.DynConverterHandler.doConversion(Unknown Source) at dynamicconverter.DynConverterHandler.runHtmlConversion(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any help would be greatly appreciated! Thanks, Ken
Edited by: klee on Oct 21, 2008 10:32 AM

I found an error in the font paths. I also add /idc/server/shared/os/linux/jdk1.5.0_11/jre/lib/fonts to the path. I restarted the idc server, and now the HTML Rendition appears to be working.

Similar Messages

IChat Error: "Can't get video from the camera"

When I try to Screen Share with iChat on a local network, I receive the error "Can't get video from the camera" when I have an external camera plugged into the FW400 port on my Mac Mini. The Screen Sharing feature works great when the camera is not connected. Anyone know why this is and how to fix it?

Tell us about the Network you created please.
What make and model modem ?
Can it route (issue IPs) ?
IS there a router ?
Make and model of that please ?
If there are two devices which is doing DHCP if any are ?
IS there any computer that is sharing it's Internet Connection with any other computer ?
I take it from the title and the post that you infer you can Video and Audio chat ?
The Cannot get Video from Camera normally gets and Error Log pop up.
This can be opened with the reveal triangle on the left. The Details shown will have a Error number. Do you know what this log says ? (normally Error 20 or 21)
Old logs are stored in Users/(your account)/Library/Logs/iChatConnectionErrors by date.
IF you post an Error Log stop at the line that Says "Binary Images for iChat" as we don't need the bits below that yet.
As the Screen share in iChat uses an Audio component then the Camera if it is also the Mic needs to be ON.
In your case this may mean that in the ichat Video Menu both Camera Enabled and Mic Enabled should both be ticked.
(I have never seen an iChat error code for not (specifically) being able to get the Mic input so the message might be the only one iChat can pop up)
It does seem very odd that it only effecting Screen Sharing.
I have a Firewire connected DV converter that has two Firewire ports itself so I can input the camera feed to two computers. When this is in place the System also sees it as a Network.
I have also heard of one person with a Firewire Stills camera and I think the Storage space was seen as an External Device and therefore appeared Networked which is why I asked the first set of questions.
iChat does not like being in Two networks (a modem that issues IP address and a router doing the same or Wireless to a neighbour and Ethernet to your Own Internet connection, the Mac being the hub in a Share Internet connection, Wireless and Ethernet to the same router and using Parallels when set to Share the Mac's IP are the most common)
The Screen Sharing option in iChat > Video Menu is ON ? (at both ends ?)
As iChat's Screen Sharing is related to the System Screen Sharing and therefore Apple Remote Desktop you may find that in any routing device you may have to open ports 5900 and 5988 if not using UPnP
http://support.apple.com/kb/TS1629?viewlocale=en_US
You said Local Network. Do you mean this is using the Bonjour Buddy List ?
11:21 AM Saturday; June 14, 2008

Finder got an error: Can't get item 1 of {document file "foo" ...}

I have a lot of files in Corel Painter 8's RIFF format. I want to write a script that opens a file and somehow forces Corel Painter 8 to save the file as a GIF. GUI scripting may be some help with the latter; now I am concentrating on finding RIFF files and opening them in Corel Painter 8.
I have a script that does a depth-first search of the folders starting at some root folder, using the Finder application to do the file-system stuff. It creates a list with
set docs to every document file of pages_folder whose file type = "RIFF"
as it loops through folders it adds to the list like this:
set more_documents to every document file of a_folder whose file type = "RIFF"
set docs to docs & more_documents
My naîve mental model is that docs is a list of document-file objects. Next I have a loop that attempts to strip out files for which a GIF file already exists (and is no older than the RIFF document). This works by deleting non-matching items like so:
if not isgifneeded then
set docs to items 1 thru (i - 1) of docs & items (i + 1) thru (length of docs) of docs
end if
Finally it tries to open one of the files in Corel Painter 8 using the Finder:
open item 1 of docs using "Corel Painter 8"
This does not work. I get an error message
Finder got an error: Can't get item 1 of {document file "bar" of folder "foo" of folder "blah" of folder "pdc" of folder "Users" of startup disk, ... }."
It lists all of the files. (The error message appears in a sheet that extends off the bottom of the screen!) They are identified in the message as document-file objects. The curly braces are, I believe, the AppleScript notation for a list. I expect to be able to obtain the first element of a list with ‘item 1 of xs’. My assumption is that the Finder’s open command would expect a document file object, or at least would be able to cope with being asked to open a document. What am I missing here?
PowerBook 12" without mini-DVI Mac OS X (10.4.7)

Hi Damian and welcome to Apple Discussions!
One suggestion: try
tell application "Finder" to open item 1 of docs
(without 'using "Corel Painter 8"')
As far as the Finder is concerned, "Corel Painter 8" is just a string of characters. And telling the Finder to open a file is just the same as double-clicking it: the Finder knows which app to use - as long as these are native Corel Painter 8 docs.
Hope this helps,
H

I have a client that uses Windows that has recently told me she can no longer open the PDFs I send her. I can't find this elusive "Always Send Windows-Friendly Attachments" setting that I have read may solve my problem. Can someone get me there?

I have a client that uses Windows that has recently told me she can no longer open the PDFs I send her. I can't find this elusive "Always Send Windows-Friendly Attachments" setting that I have read may solve my problem. Can someone get me there?

Dear Dan,
It was from InDesign that I was creating the shared pdfs. I was one of two Mac drivers in a corporate sea of Win users and had to make the change I mentioned in order for the Win users to see my pdfs for review. The difference from what you appear to be doing was that were all on an MS Exchange Server so the files were shared over the company's Exchange Server e-mail system. However, some of these files occasionally went to outside users via regular e-mail and those people had no issues either.
So what I did was tested and worked for years.
You might look at the Adobe forums or Knowledge Base to see if that is a reported issue with newer version of CS. I was on CS2 when I was doing this, and the other Mac driver was on CS3 but had no problems either.
Some Win users I've talked to find a problem opening some pdfs (not mine) in general and found they had to open Reader first and them open the file from Reader's File menu. That most often happened if the client was using an outdated version of Reader.

Import Issue : "Database error: can't get path to master" when attempting to import photos (referenced method)

Hi Everyone,
I have a NAS (Network Attached Storage) which holds my photos. I want to import them into Apple photos (but via the reference method).
I did this by going to Preferences/General and unchecking the 'Importing: Copy items to the Photo library' option.
I connect to my NAS via AFP and have mount 'Media' which is where my photos are stored.
I select the file/import option, navigate to aforementioned photo location and select the "Review for import" button
I then receive an error which states:
Unreadable File
The following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).
Filename Reason
Filename.jpg Database Error: can't get path to master
The above error happens on multiple file types.....
However ...
If I tick the option in the preferences/general to 'Importing : Copy items to photo library" option then the file will import successfully.
I of course don't want to import the files I want them to be referenced...
Anyone else experiencing this issue????
Thanks in advance.
Benjamin

If this is a 3rd party application, I would seek out that company and ask for an updated version compatible with 2010, then it would be a matter of simply installing it per their instructions.
Otherwise, the best course of action is to deactivate the feature from WSSv3 prior to removal. If that is no longer possible, then use
FeatureAdmin to remove the feature from within 2010.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Rsh[3088]: [ID 365563 daemon.error] can't get stderr port in /var/adm/mes..

Hi,
We are using Solaris 9 in our SF6900 cluster. On one of the node we are getting below continuous flow of messages. Please let me know what does these messages means and how to clear them.
root@l7n2> tail -f /var/adm/messages
Aug 8 09:09:34 l7n2 rsh[3071]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3075]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3077]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3078]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3082]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3084]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3085]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3086]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3087]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
Aug 8 09:09:34 l7n2 rsh[3088]: [ID 365563 daemon.error] can't get stderr port: Cannot assign requested address
^C
Thanks.

Hi Tom,
     Thanks, but at this point, I've rebooted, checked and double-checked more times than I'd care to count...:(
     Since I can see the NMEA strings when the GPS module is hooked-up to the USB port, I guess I'll assume there's some reason why the
     AMA0 UART has not been released, or that the GPS receives some different signals through the TTY that it's not seeing through the AMA0.
      As I mentioned, when I use 'cat /dev/ttyAMA0', it just hangs, like it's getting no data. I'll keep looking...
     Thanks for your help,
          Dave

[ID 365563 daemon.error] can't get stderr port: Cannot assign requested add

Hello friends, i m getting the messages bellow in error logs, please suggest me what i have to do
" [ID 365563 daemon.error] can't get stderr port: Cannot assign requested add"

Hi Tom,
     Thanks, but at this point, I've rebooted, checked and double-checked more times than I'd care to count...:(
     Since I can see the NMEA strings when the GPS module is hooked-up to the USB port, I guess I'll assume there's some reason why the
     AMA0 UART has not been released, or that the GPS receives some different signals through the TTY that it's not seeing through the AMA0.
      As I mentioned, when I use 'cat /dev/ttyAMA0', it just hangs, like it's getting no data. I'll keep looking...
     Thanks for your help,
          Dave

Applescript for mail error can't get message id

I have an applescript (found on internet) for Mail 4.5 that deletes messages in "on my mac" mailbox "Deleted Inbox" that are older than 120 days. The script runs from an iCal daily event. I drag messages from Inbox to "Deleted Inbox" when I don't want the message in Inbox, but I want to save the message for 120 days before deleting it. The script sometimes runs successfully, and sometimes gives error "Mail got an error: Can't get message id xxx of mailbox "Deleted Inbox"". Then in Mail, I "Mailbox / Rebuild" that mailbox, and run the script manually without error. How can I avoid that error? The script is essentially:
tell application "Mail"
          set OldStuff to every message of mailbox TheBox where date received of it < OldDate
          repeat with ThisMessage in OldStuff
delete ThisMessage
          end repeat
end tell
Thanks for any help.
Ken

How can I avoid that error?
I don't actually know how you can avoid that error. However, maybe you can use a workaround and have the script rebuild the mailboxes automatically when such an error occurs. Try the following code:
tell application "Mail"
try
    set OldStuff to every message of mailbox TheBox where date received of it < OldDate
on error
    activate
    tell application "System Events" to click menu item "Rebuild" of menu 1 of menu bar item "Mailbox" of menu bar 1 of process "Mail"
    delay 1 -- adjust if necessary
    set OldStuff to every message of mailbox TheBox where date received of it < OldDate
end try
repeat with ThisMessage in OldStuff
    delete ThisMessage
end repeat
end tell
Since the above script uses GUI Scripting, you must enable the Accessibility Frameworks by clicking the checkbox labeled "Enable access for assistive devices" in the Universal Access System Preference pane.
Message was edited by: Pierre L.

System Events got an error: Can't get current configuration of service?

I'm trying to connect/disconnect services through apple script, here is the error I'm getting for "Ethernet" "AirPort" (these services are configured in services tab)
I am able to manualy On/Off these services without supplying admin password, therefore it might not be privilages issue.
*Error message:*
*System Events got an error: Can’t get current configuration of service id "099F7D16-4F3A-4D49-9111-A4DF0A645378" of network preferences.*
Scipt used:
tell application "System Events"
tell network preferences
tell current location
get the name of every service
set myService to service "AirPort"
if exists myService then
--get service properties of myService
set isConnected to connected of current configuration of myService
if isConnected then
disconnect myService
repeat while (get connected of current configuration of myService)
delay 1
end repeat
end if
connect myService
end if
end tell
end tell
end tell

Hi Damian and welcome to Apple Discussions!
One suggestion: try
tell application "Finder" to open item 1 of docs
(without 'using "Corel Painter 8"')
As far as the Finder is concerned, "Corel Painter 8" is just a string of characters. And telling the Finder to open a file is just the same as double-clicking it: the Finder knows which app to use - as long as these are native Corel Painter 8 docs.
Hope this helps,
H

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

How can I get rid of other files on my mac ?

how can I get rid of other files on my mac ?

Hope this helps.
1. Empty Trash.
    http://support.apple.com/kb/PH10677
2. Delete "Recovered Messages", if any.
    Hold the option key down and click "Go" menu in the Finder menu bar.
    Select "Library" from the dropdown.
    Library > Mail > V2 > Mailboxes
    Delete "Recovered Messages", if any.
    Empty Trash. Restart.
3. Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
4. For more on this and very helpful tips:
    http://pondini.org/OSX/DiskSpace.html
    http://pondini.org/OSX/LionStorage.html
5. Disk space / Time Machine ?/ Local Snapshots
   http://support.apple.com/kb/ht4878
6 Re-index Macintosh HD
   System Preferences > Spotlight > Privacy
   http://support.apple.com/kb/ht2409

How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings?

I had renamed my user login name and assumed that there will be no change in the settings and files. When I login with the new profile name everything is gone. How can I get back all my files and settings? Please help. Thanks.

You should have asked this before you tried: Changing username or short name- User Account and Short Name- OS X- How to change user account name or home directory name.

How can we get tag of XML file using SAX

Hi ,
I'm parsing one SAX parser , I'have almost done this parsing. i have faced problem for one case, i'e how can we get tag from XML file using SAX parser?
XML file is
<DFProperties>
<AccessType>
<Get/>
</AccessType> <Description>
gdhhd
</Description>
<DFFormat>
<chr/>
</DFFormat>
<Scope>
<Permanent/>
</Scope>
<DFTitle>gsgd</DFTitle>
<DFType>
<MIME>text/plain</MIME>
</DFType>
</DFProperties>
I want out like GET and Permanent... means this one tag which is present inside of another tag.
Handler class like
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if(_ACCESSTYPE.equals(localName)){
               accessTypeElement=ACCESSTYPE;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_ACCESSTYPE.equals(_accessTypeElement)) {
               String strValue = new String(ch, start, length);
               System.out.println("Accestype-----------------------------> " + strValue);
               //System.out.println(" " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_ACCESSTYPE.equals(localName)) {
               _accessTypeElement = "";
. please any body help me

Hi ,
I have one problem,Please help me.
1. How can I'll identify where exactly my Node is ended,means how how can we find corresponding nodename? in partcular place
<Node> .............starttag1
<NodeName>Test</NodeName>
<Node>................starttag2
<nodeName>test1</NodeName>
</Node>..................endtag2
<Node>.....................starttag3
<NodeName><NodeName>
<Node> .........................starttag4
<NodeName>test4</NodeName>
</Node>.......enddtag4
</Node>...........end tag3
</Node>............endtag1
my code is below
private final String _NODENAME = "NodeName";
private final String _NODE = "Node";
private String _nodeElement = "";
     private String _NodeNameElement = "";
public void startElement(String namespaceURI, String localName,
               String qName, Attributes atts) throws SAXException {
if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
if(_NODE.equals(localName)){
     System.out.println("start");
     if (_NODENAME.equals(localName)) {
               NodeNameElement = NODENAME;
public void characters(char[] ch, int start, int length)
               throws SAXException {
if (_NODENAME.equals(_NodeNameElement)) {
               String strValue = new String(ch, start, length);
               String sttt=strValue;
               System.out.println("NODENAME: ************* " + strValue);
if(_NODE.equals(_nodeElement)){
               if (_NODENAME.equals(_NodeNameElement)) {
                    String strValue = new String(ch, start, length);
                    String sttt=strValue;
                    System.out.println("nodevalue********** " + strValue);
public void endElement(String namespaceURI, String localName, String qName)
               throws SAXException {
if (_NODENAME.equals(localName)) {
               _NodeNameElement = "";
if(_NODE.equals(localName)){
               System.out.println("NODENAME: %%%%%%%%%");
please help me. How can I figure node ending for particular nodename

Where can I get help re: a file missing from Pages in iCloud?

Where can I get help re: a file missing from Pages in iCloud?

If the file was also on a mac, then there was a local copy of the file in ~/Library/Mobile Documents. If you use Time Machine or any other backup program on your computer, then try restoring the file(s). Similarly the same thing would be done on a PC, but I'm not sure where the icloud local copies are kept.

Solved: Dynamic Converter error - Can't get HTML rendition of files

Similar Messages

Maybe you are looking for