[SOLVED] enable apache ssl to use httpS at will for any vhost

Hi,
I have enabled ssl on my apache install without a problem by including the file httpd-ssl.conf in my http.conf.
I have tested access by trying to access my phpmyadmin install by going to my site: https://example.com/phpmyadmin
However, when trying to use a vhost with https, it doesn't work, I get redirected to a default page (first configured vhost) as https.
If I modify the vhost like this, adding 443:
<VirtualHost *:80 *:443>
</VirtualHost>
I get an error "(Error code: ssl_error_rx_record_too_long)".
If I just add to the vhost config file instead like this:
NameVirtualHost *:80
NameVirtualHost *:443
SSLStrictSNIVHostCheck off
then I still only get the default site, but not my vhost site under ssl.
Any pointers on getting this to work? I want to be able to universally add an "s" to "http" for any vhost whenever I feel like it to encrypt traffic...
Thanks!
EDIT: Here's the solution I found. I disabled ssl on apache by commentingout the httpd-ssl.conf-Include directive in httpd.conf.
Then I installed stunnel and pointed it to my server key and certificate and enabling https connections to forward to port 80 on localhost.
One gotcha to look out for was to put "https: ALL" into the /etc/hosts.allow file as stunnel apparently uses this to decide whether a client can connect.
Last edited by awayand (2011-04-24 12:10:46)

Apache is already listening on 443, otherwise it wouldn't work at all when I access https://example.com/phpmyadmin. My problem is that instead of responding by serving the requested vhost, apache serves only the default vhost page. For example, https://x.example.com, https://y.example.com, https://z.example.com all serve my default page at https://example.com instead of the corresponding vhost. Any idea as to what to configure so that apache serves the requested vhost under https?
EDIT: clarification
Last edited by awayand (2011-04-23 04:39:02)

Similar Messages

SSL Cert used to sign Jars for distribution via WebStart

Hi,
I have an SSL cert (Comodo InstallSSL) for my website and wondered if I can use it to sign jars so, when distributed via webstart, the old "untrusted source" message doesn't get displayed. I've been doing a lot of reading but, to be honest, I can't really find my bearings! I have imported the cert into my keystore but get the message when I try to sign a jar:
Certificate chain not found for: myalias myalias must reference a valid KeyStore key entry containing a private key and corresponding public key certificate chain.I have the following files in relation to my cert:
xxx.cabundle (this can be imported into keytool easily)
cert/xxx.crt (looks like a PGP file, cannot be imported (-import) into keytool)
private/xxx.key
My questions I suppose are:
1. Can I use a cert issued for SSL to sign jars for webstart distribution?
2. If yes to 1; what steps other than importing the cert alone (which generates the message above) do I need to do to achieve this?
Any help would be appreciated!
Rich

Hi,
yes, the pkcs12 certificate includes the private key, as opposed to pb7 which does not.
Sent from Cisco Technical Support Android App

How to use Http test Client for Java Client Proxy Scenario

Hi,
I build a scenario using Java Client Proxy where JSP as my FrontHand.
Can I know that whether i can use Http Test Client in place of JSP for sending data and getting response back. If yes than how can i implement this ?
Regards,
Abhi

Hi,
with Http Test Client you post your messages
directly to the Integration Engine (not using adapter framework)
so you can use Http Test Client to simulate any message
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Using iPhone as Storage for any docs

Does anyone know how can I user iphone as storage device? I had motorola phone with 8 gigs mem card, where I could drag any docs (word, excell or any pics and music) I know it's pain here already with all the podcasts that I downloaded to transfer to a different PC, how can I transfer Word docs?

You mean you want to be able to take work files from one computer, upload them to the iPhone, then download them another, different computer? Just making sure I understand what you want to do.
I do not know of any universal file transfer app like that, other than using some cloud-type storage perhaps as a go between computer(s) and iPhone.
For MSOffice docs specifically, there is QuickOffice, which allows editing of MSOffice documents on the iPhone. QO transfers files between computer and the iPhone via an embedded (in the app on the iPhone) wifi web server. You enable the file transfer web server on the iPhone, and then connect via a URL in a web browser on any computer you wish that is on the same wifi subnet. Once the web page loads on the computer, you can upload or download files to/from the iPhone.
Because of the app compartmentalization of the iOS, the office files on the iPhone would only be accessible from within QuickOffice.

How can I recover my YouTube favorites - I had hundreds related to my craft, and IO6 seems to have lost them. I'm temporarily using Jasmine. Thanks for any help.

How can I recover my YouTube favorites after Io6? I had hundreds of them for my crafts. I'm using Jasmine as. substitute pending publication org an original replacement.
thanks

Favorites
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201/817edd794b0091f8503 7d4ffff1d881f.jpg

I created a book at the Ibooks author. But there are pages where the number of the page does not appear. How I can solve this problem? I thank you very much for any tip.

I created a book at the Ibooks author. But there are some pages which the number of page is not visible. What can I do to see the number of the page?

Have you changed the template?
Some pages may not have numbers in place as default. If you have changed the page or the template page, you may have added a object which as pushed the number out of view, or an image may be in a layer on top of the text.
If you select one object on the page...then go to Edit, select all, you should see the outlines of any content no matter that content may not be seen. Look at the bottom for a page width rectangle outline.. IF its there, you need to shuffle the content until you find that box, and use Arrange > bring to front.

I use Premiere CS 3 for any AVCHD work i do

I won't use media encoder unless it's like really easy and short, like under a minute
one time i used it to convert several 1 to 10 minute long avchd clips to f4v or flv don't remember and it actually worked without causing serious sanity questioning.
however, i can say without getting into specifics or wanting to barf when people say its great is this,
it sucks. it's unreliable for fast work of meaningful scope and length (talking heads, no corporate 90s videos and no TED talk slideshows) and i'd use final cut any day and wait on it cause the image quality is almost always better, i've had better luck using bridge to import full timelines into after effects from premiere cs4 and outputting there, i did do that once, i don't remember how because it was out disbelief that i had to.
premiere cs4 with avchd is also awful.
premiere cs3 for exporting and using avchd, is absolutely superb, the abomination that is ame cs4 makes me sick to the point of getting another camcorder so i never have to use it or premiere again, unless it's premiere cs3 or cs2 if cs2 could handle avchd.
i mean this in the best of ways, MEncoder CS4, is awful
NOW YOU THINK YOU GUYS CAN PUT TRUE vanishing point features in Ae so i can keyframe it? or is that still too hard or not of interest
and in the Ae timeline, EVER HEARD OF FOLDERS?
Keeping it dirty in a synthetically sanitized world,
Your Welcome

Reinstall CS5 and see if that re-writes the common files for you. If it does not, you'll have to uninstall both versions, run the clean tool (CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 ) and then reinstall first CS4, then CS5.

[CS3 JS SDK] Possible to Use HTTP URLs for Links?

I am attempting to use JavaScript to implement a connector from CS3 (InDesign/InCopy in my case) to our content management system. Our CMS provides an HTTP-based API. By using the HttpConnection object (from the Bridge code, see posts on "httpwebaccess library") I can access our repository using HTTP URLs and, for example, get an InDesign document or INX file (and the UI support in CS3 scripting makes it possible for me to build all the UI components I need without having to write a true plugin).
However, what I *can't* seem to do is create Link objects that use a URL, rather than a File, to access resources.
My goal is to be able to store in our repository InDesign documents that use URLs to other resources in the repository for links (e.g., to graphics and InCopy articles).
However, as far as I can tell from the scripting documentation and my own experiments, the URL property on Link is read-only in JavaScript (even though the scripting API HTML indicates it's a read/write property) and Link instances can only be constructed using File objects.
My question: have I missed some trick in the scripting API (or elsewhere) that would allow me to create links that use URLs instead of files (and having done so would InDesign resolve those URLs?)? Our repository does support WebDAV, so that might be an option, but it would depend on mounting WebDAV services in consistent places on client machines, which is dicey at best, given the weak nature of the WebDAV clients on both Windows and OS X).
Or are my only options to either copy linked resources to the client's local file system (or a shared network drive) or implement a plugin that implements my desired behavior for links?
And if the answer is a plugin, will that even work?
This is in the context of CS3. Has the Link mechanism changed at all in CS4 such that I could do what I want in CS4 where I cannot in CS3?
Thanks,
Eliot

Hi,
It is not possible to use HTTP URLS in CS3. You will have to create a plug-in to use Custom Data Links.
I think it is possible to use HTTP URLs in CS4 as per the User Guide.
Regards,
Anderson

Login that does not use https

I don't have access to https sites from my current work facility.
Do you have a login method that does not use HTTPS?
Is there any way that I can link my metalink account and my OTN account, and get to OTN through my metalink account?
David

Okay ... I fixed this, Oracle XE finally convinced them to let us have access to https at OTN.
David

Account access rights and role for XI-to-XI communication using https

Hi,
Can anyone please provide information regarding what is the minimum privileges to be awarded to a new account created in XI so that a customer can connect using https.
Presently, for testing purposes we are using PISUPER and PIAFUSER.
We are making use of XI adapter.
Thank you
Message was edited by:
Vijay Pulugurta

For configuring HTTPS communication in XI you need to setup both ABAP and Java part of XI.
Follow the steps mentioned in the URL below.
http://help.sap.com/saphelp_nw04s/helpdata/en/e8/1f1041a0f6f16fe10000000a1550b0/frameset.htm
Satish

Can't use http in ios 8 simulator

I have installed xcode 6, on a mac book pro (Maverick 10.9.5) When I try to use the ios simulator running ios 8 on virtual iPhone 5s, and try to connect to any site that is not using https, I get a blank page stating that "Safari cannot open the page because the network connection was lost" in the simulator. Any page that uses https works fine.
Any clue ?

I have Xcode 6.1.1 and I'm still having problems. http and https both. It's not just safari either. Other applications can't access the network either.
Could these errors give any additional information?
Dec 11 16:32:49 **** lsuseractivityd[45897]: [SFActivityAdvertiser] ERROR: no XPC proxy, queuing advertisement <49a6aaa1 dc34cf01 72>
Dec 11 16:32:56 **** SpringBoard[45804]: Could not determine current country code: Error Domain=NSURLErrorDomain Code=-1001 "The request timed out." UserInfo=0x7d0e9680 {NSErrorFailingURLStringKey=http://gsp1.apple.com/pep/gcc, NSErrorFailingURLKey=http://gsp1.apple.com/pep/gcc, NSLocalizedDescription=The request timed out., NSUnderlyingError=0x7d01aff0 "The request timed out."}
Sometimes I can get it to work and sometimes I can't. I am getting very frustrated with the instability of the network connection on iOS 8 simulator.

Using http live streaming

Hello. For a project I am working on, I need to design a secure streaming system for audio files such that they can be streamed but not downloaded (due to copy right issues). I was looking into http live streaming as a possible solution. However, I am new to developing web applications and the like and was hoping for some help, maybe links to sample code, how to use http live streaming for my server/in my code, etc. In particular, I was hopping to make the streaming available to firefox, safari, and apple mobile devices. I am hoping to develop this using html 5.
Thanks.

I have same issue with 64bit Safari 5.1 and 10.6.8.
Video plays if not protected. If Protected says "Loading" and never plays.
With 32bit Safari looks the same but...
There is a login window behind the Safari window. If I find it and login, mp4 plays.
Is quite annoying. Any fixes?

Using lion, do i have any way of printing out on to a cd/dvd

hi
i have a epson printer R2880, i have copied some vhs to dvd and now would like to print on my dvd's but the epson software only works on powder pc! any other ideas, software i may have but not aware of or what i can get for free or will i have to spent some cash!?
i do have CS5.0 photoshop, and various of its friends, but limited ability to use them!
thanks for any help,
P.S. i don't blame you if you all look and run...................!
alan

Hi Alan,
Although the printers provided the print drivers via Apple Software Update, the Epson site do seems to provide additional CD printing software for Lion.
Please follow the link below and expend the Utilities section:
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=104488&BV_UseBVCook ie=yes&infoType=Downloads&platform=OSF_M_X7
Hope that may help,
Shlomi

How to search in Pages for any number or any character, using wildcards

Is it possible in Pages to use wildcards to search for any instance of any number? For example, I want to find all occurrences of any one or two digits followed by a colon, such as 8: or 37:
If I can't use wildcards, is there any other way to search, other than tediously searching for every instance of 1, every instance of 2, etc.?
Thanks!
Sue

Hello
Here is an enhanced version.
--[SCRIPT highlight_ digitspluscolon]
Enregistrer le script en tant que Script : highlight_ digitspluscolon.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Pages:
Il vous faudra peut-être créer le dossier Pages et peut-être même le dossier Applications.
Ouvrir un document traitement de textes Pages
aller au menu Scripts , choisir Pages puis choisir highlight_ digitspluscolon
Dans les éléments de texte, l'arrière plan des groupes de chiffres
suivis d'un caractère deux points sera mis en rouge.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: highlight_ digitspluscolon.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Pages:
Maybe you would have to create the folder Pages and even the folder Applications by yourself.
Open a Pages word processor document.
go to the Scripts Menu, choose Pages, then choose "highlight_ digitspluscolon"
In the text objects, the background of groups of digits
with a trailing colon will be set to red.
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
--=====
Yvan KOENIG (VALLAURIS, France)
2010/07/17 -- enhanced to treat also text boxes and shapes
--=====
on run
local en_liste, le_dernier, un_groupe, le_premier, recul
local les_boites, une_boite, les_formes, une_forme
Try to treat the main text layer
tell application "Pages"
try
set le_document to name of document 1
tell document 1 to set le_texte to body text
on error
set le_texte to ""
end try
end tell -- Pages
if le_texte > "" then
set en_liste to my decoupe(le_texte, ":")
set le_dernier to 0
tell application "Pages" to tell document le_document
repeat with i from 1 to count of en_liste
set un_groupe to item i of en_liste
set le_dernier to le_dernier + 1 + (count of un_groupe)
set recul to 0
repeat with j from 1 to 10
if character -j of un_groupe is in "0123456789" then
set recul to -j
else
exit repeat
end if
end repeat -- with j
if recul < 0 then
set le_premier to le_dernier + recul
set character background color of characters le_premier thru le_dernier to {65535, 0, 0}
end if -- recul < 0
end repeat -- with i
end tell -- Pages…
end if -- le_texte > ""
Try to treat text boxes
try
tell application "Pages" to tell document le_document to set les_boites to every graphic whose class is text box
on error
set les_boites to {}
end try
if les_boites is not {} then
repeat with une_boite in les_boites
tell application "Pages" to tell document 1
tell une_boite to set le_texte to object text
end tell -- Pages…
my highlight(le_document, une_boite, le_texte)
end repeat
end if -- with f
Try to treat shapes
try
tell application "Pages" to tell document 1 to set les_formes to every graphic whose class is shape
on error
set les_formes to {}
end try
if les_formes is not {} then
repeat with f from 1 to count of les_formes
I know that using whose is more efficient than using an index but, in Pages '09, whose doesn't apply to shapes. *)
tell application "Pages" to tell document 1
set une_forme to item f of les_formes
tell une_forme to set le_texte to object text
end tell -- Pages
my highlight(le_document, une_forme, le_texte)
end repeat -- with f
end if
end run
--=====
on highlight(un_document, un_contenant, son_Texte)
local en_liste, le_dernier, un_groupe, recul, le_premier
set en_liste to my decoupe(son_Texte, ":")
set le_dernier to 0
tell application "Pages" to tell document un_document to tell un_contenant to tell object text
repeat with i from 1 to count of en_liste
set un_groupe to item i of en_liste
set le_dernier to le_dernier + 1 + (count of un_groupe)
set recul to 0
try (*
Useful if a shape was erroneously pasted in a text box. *)
repeat with j from 1 to 10
if character -j of un_groupe is in "0123456789" then
set recul to -j
else
exit repeat
end if
end repeat
end try
if recul < 0 then
set le_premier to le_dernier + recul
set character background color of characters le_premier thru le_dernier to {65535, 0, 0}
end if
end repeat
end tell -- Pages
end highlight
--=====
on decoupe(t, d)
local oTIDs, l
set oTIDs to AppleScript's text item delimiters
set AppleScript's text item delimiters to d
set l to text items of t
set AppleScript's text item delimiters to oTIDs
return l
end decoupe
--=====
--[/SCRIPT]
It scans the main text layer in Word Processor documents.
It scans text boxes and shape in Word Processor and Layout documents.
Is it useful to scan :
headers, footers, tables ?
Yvan KOENIG (VALLAURIS, France) samedi 17 juillet 2010 21:07:04

[solved] Owncloud over SSL: http works, but over https only apache

Hello,
I try to setup owncloud with SSL.
Accessing over http works, but over https, I reach the default apache page instead of the owncloud page.
(I set up SSL according to https://wiki.archlinux.org/index.php/LAMP#SSL )
How could I make the owncloud site available over https?
relevant files:
owncloud.conf:
<IfModule mod_alias.c>
Alias /owncloud /usr/share/webapps/owncloud/
</IfModule>
<Directory /usr/share/webapps/owncloud/>
Options FollowSymlinks
Require all granted
php_admin_value open_basedir "/srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/owncloud/:/etc/webapps/owncloud/:/mt/daten/owncloud/"
</Directory>
<VirtualHost *:80>
ServerAdmin [email protected]
DocumentRoot /usr/share/webapps/owncloud
ServerName http://example.com/owncloud
</VirtualHost>
I tried to change 80 to 443, but then, systemctl restart httpd didn't work. (apache failed)
httpd.conf:
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/etc/httpd"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
<IfModule mod_ssl.c>
Listen 443
</IfModule>
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
#LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#own additions:
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
Options FollowSymLinks
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# Include owncloud
Include /etc/httpd/conf/extra/owncloud.conf
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
thanks!
Last edited by Carl Karl (2014-05-06 07:40:53)

OK, solved.
What I made wrong:
https://localhost leads to the apache page
https://localhost/owncloud leads to the owncloud page.
(Just as an information if there are other apache noobs like me...)

[SOLVED] enable apache ssl to use httpS at will for any vhost

Similar Messages

Maybe you are looking for