[SOLVED] Epson flatbed scanner detected but not working

I have an Epson V330 scanner which used to work with iscan and iscan-data from AUR. Now the scanner is detected correctly by lsusb, sane-find-scanner, and scanimage -L, but if I run
     scanimage > image/pnm
I get
     sane_start: Invalid argument
xsane brings up the scanner but it gives the same error.
I think the problem may be related to the fact that there is no /dev/scanner0 or anything similar, which I think there should be. I've tried rebooting with the scanner switched on but no result.
Last edited by acampbell (2014-07-05 15:34:17)

Thanks so much - yes, that was it!   I had to reinstall my system last month and I forgot that I'd been caught out by that one previously. Now working.

Similar Messages

  • EGalax Touchscreen Detected But Not Working

    I installed Arch Linux x64 in Lenovo S400 Touch, it has a "eGalax Inc. eGalaxTouch" Thouchscreen, i have tried most of the thread, yet i cant figure out how to get it to work!
    Here is the output from lsusb
    Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 004: ID 04f2:b420 Chicony Electronics Co., Ltd
    Bus 001 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
    Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 003 Device 002: ID 0eef:a107 D-WAV Scientific Co., Ltd
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Here is the output from Xorg Log
    [ 33.081] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00 (/dev/input/event5)
    [ 33.081] (**) eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Applying InputClass "evdev touchscreen catchall"
    [ 33.133] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 15 paused 0
    [ 33.134] (II) Using input driver 'evdev' for 'eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00'
    [ 33.134] (**) eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: always reports core events
    [ 33.134] (**) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Device: "/dev/input/event5"
    [ 33.134] (--) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Vendor 0xeef Product 0xa107
    [ 33.134] (--) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Found absolute axes
    [ 33.134] (--) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Found absolute multitouch axes
    [ 33.134] (II) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: No buttons found, faking one.
    [ 33.134] (--) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Found x and y absolute axes
    [ 33.134] (--) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Found absolute touchscreen
    [ 33.134] (II) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: Configuring as touchscreen
    [ 33.134] (**) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: YAxisMapping: buttons 4 and 5
    [ 33.134] (**) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 33.134] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:0EEF:A107.0001/input/input6/event5"
    [ 33.134] (II) XINPUT: Adding extended input device "eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00" (type: TOUCHSCREEN, id 9)
    [ 33.134] (II) evdev: eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: initialized for absolute axes.
    [ 33.135] (**) eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: (accel) keeping acceleration scheme 1
    [ 33.135] (**) eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: (accel) acceleration profile 0
    [ 33.135] (**) eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: (accel) acceleration factor: 2.000
    [ 33.135] (**) eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00: (accel) acceleration threshold: 4
    [ 33.135] (II) config/udev: Adding input device eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00 (/dev/input/mouse0)
    [ 33.135] (II) No input driver specified, ignoring this device.
    [ 33.135] (II) This device may have been added with another device file.
    [ 33.136] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event12)
    [ 33.136] (**) Lenovo EasyCamera: Applying InputClass "evdev keyboard catchall"
    [ 33.136] (**) Lenovo EasyCamera: Applying InputClass "system-keyboard"
    [ 33.137] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 16 paused 0
    [ 33.137] (II) Using input driver 'evdev' for 'Lenovo EasyCamera'
    Here is the output from xinput --list
    xinput --list
    ⎡ Virtual core pointer id=2 [master pointer (3)]
    ⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
    ⎜ ↳ eGalax Inc. eGalaxTouch EXC7910-1018-08.00.00 id=9 [slave pointer (2)]
    ⎜ ↳ SynPS/2 Synaptics TouchPad id=13 [slave pointer (2)]
    ⎣ Virtual core keyboard id=3 [master keyboard (2)]
    ↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
    ↳ Power Button id=6 [slave keyboard (3)]
    ↳ Video Bus id=7 [slave keyboard (3)]
    ↳ Power Button id=8 [slave keyboard (3)]
    ↳ Lenovo EasyCamera id=10 [slave keyboard (3)]
    ↳ Ideapad extra buttons id=11 [slave keyboard (3)]
    ↳ AT Translated Set 2 keyboard id=12 [slave keyboard (3)]
    Here is the output from xrandr
    Screen 0: minimum 8 x 8, current 1366 x 768, maximum 32767 x 32767
    LVDS1 connected primary 1366x768+0+0 (normal left inverted right x axis y axis) 309mm x 173mm
    1366x768 60.10*+
    1024x768 60.00
    800x600 60.32 56.25
    640x480 59.94
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI1 disconnected (normal left inverted right x axis y axis)
    VGA1 disconnected (normal left inverted right x axis y axis)
    VIRTUAL1 disconnected (normal left inverted right x axis y axis)
    Here is the output of lsmod
    Module Size Used by
    fuse 87590 3
    ctr 12927 2
    ccm 17534 2
    coretemp 12820 0
    hwmon 12930 1 coretemp
    intel_rapl 17605 0
    iosf_mbi 12682 1 intel_rapl
    arc4 12536 2
    brcmsmac 536435 0
    cordic 12352 1 brcmsmac
    brcmutil 13136 1 brcmsmac
    b43 414640 0
    mac80211 648753 2 b43,brcmsmac
    x86_pkg_temp_thermal 12951 0
    intel_powerclamp 17122 0
    cfg80211 476584 3 b43,brcmsmac,mac80211
    kvm_intel 143417 0
    uvcvideo 84822 0
    snd_hda_codec_hdmi 49263 1
    ssb 65506 1 b43
    rng_core 12808 1 b43
    videobuf2_vmalloc 13286 1 uvcvideo
    videobuf2_memops 12519 1 videobuf2_vmalloc
    videobuf2_core 39635 1 uvcvideo
    pcmcia 53108 2 b43,ssb
    v4l2_common 12814 1 videobuf2_core
    videodev 135040 3 uvcvideo,v4l2_common,videobuf2_core
    pcmcia_core 18431 1 pcmcia
    media 18365 2 uvcvideo,videodev
    joydev 17063 0
    snd_hda_codec_realtek 67322 1
    snd_hda_codec_generic 63161 1 snd_hda_codec_realtek
    rtsx_usb_ms 16899 0
    memstick 13696 1 rtsx_usb_ms
    bcma 46203 3 b43,brcmsmac
    mousedev 17272 0
    r8169 76869 0
    kvm 435299 1 kvm_intel
    mii 12675 1 r8169
    iTCO_wdt 12831 0
    iTCO_vendor_support 12649 1 iTCO_wdt
    crct10dif_pclmul 13394 0
    crc32_pclmul 12915 0
    shpchp 35210 0
    snd_hda_intel 26387 3
    snd_hda_controller 26857 1 snd_hda_intel
    ideapad_laptop 17447 0
    snd_hda_codec 112621 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    ac 12715 0
    crc32c_intel 21809 0
    psmouse 107442 0
    snd_hwdep 17244 1 snd_hda_codec
    snd_pcm 88779 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 14 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    ghash_clmulni_intel 12978 0
    thermal 17559 0
    cryptd 18553 1 ghash_clmulni_intel
    pcspkr 12595 0
    serio_raw 12849 0
    battery 17452 0
    mei_me 17987 0
    mei 75468 1 mei_me
    soundcore 13031 2 snd,snd_hda_codec
    sparse_keymap 12818 1 ideapad_laptop
    rfkill 18867 3 cfg80211,ideapad_laptop
    i2c_i801 16965 0
    evdev 21544 13
    lpc_ich 20768 0
    mac_hid 12633 0
    processor 27777 0
    sch_fq_codel 17343 6
    ext4 514390 1
    crc16 12343 1 ext4
    mbcache 17171 1 ext4
    jbd2 86379 1 ext4
    rtsx_usb_sdmmc 25280 0
    led_class 12855 3 b43,brcmsmac,rtsx_usb_sdmmc
    mmc_core 110613 3 b43,ssb,rtsx_usb_sdmmc
    rtsx_usb 17487 2 rtsx_usb_sdmmc,rtsx_usb_ms
    hid_multitouch 17057 0
    usbhid 48596 0
    hid 110513 2 hid_multitouch,usbhid
    sd_mod 43575 2
    atkbd 22254 0
    libps2 12739 2 atkbd,psmouse
    ahci 33248 1
    libahci 27215 1 ahci
    libata 181461 2 ahci,libahci
    xhci_pci 12675 0
    ehci_pci 12512 0
    scsi_mod 147395 2 libata,sd_mod
    xhci_hcd 152471 1 xhci_pci
    ehci_hcd 69979 1 ehci_pci
    usbcore 199382 7 uvcvideo,rtsx_usb,ehci_hcd,ehci_pci,usbhid,xhci_hcd,xhci_pci
    usb_common 12561 1 usbcore
    i8042 18002 2 libps2,ideapad_laptop
    serio 18282 6 serio_raw,atkbd,i8042,psmouse
    i915 1002518 3
    button 12953 1 i915
    intel_gtt 17848 1 i915
    i2c_algo_bit 12744 1 i915
    video 22205 1 i915
    drm_kms_helper 98881 1 i915
    drm 273079 5 i915,drm_kms_helper
    i2c_core 50240 7 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,v4l2_common,videodev
    I have blacklisted "usbtouchscreen" module
    It seems to be detected, but i have no idea how to make it work, it isnt even registering any kind of touch event, i even tried installing eGalax driver from AUR, it still didnt work.
    Please help me by pointing me in the right direction!
    Any help is appreciated. Thank you!
    Last edited by kshergil (2015-04-20 19:08:28)

    i posted output of that command without starting X
    Here is complete output after starting X
    [samtech@M4800 ~]$ journalctl -b | grep -i bluetooth
    Dec 10 21:37:45 localhost kernel: Bluetooth: Core ver 2.19
    Dec 10 21:37:45 localhost kernel: Bluetooth: HCI device and connection manager initialized
    Dec 10 21:37:45 localhost kernel: Bluetooth: HCI socket layer initialized
    Dec 10 21:37:45 localhost kernel: Bluetooth: L2CAP socket layer initialized
    Dec 10 21:37:45 localhost kernel: Bluetooth: SCO socket layer initialized
    Dec 10 21:37:45 localhost kernel: Bluetooth: hci0: read Intel version: 370710018002030d00
    Dec 10 21:37:45 localhost kernel: Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    Dec 10 21:37:45 localhost kernel: Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    Dec 10 21:39:12 localhost NetworkManager[308]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
    Last edited by samtech09 (2014-12-10 16:52:30)

  • Flash plugin detected but not working (Firefox 22 on Linux)

    Hi all,
    I can't get the flash plugin to work. It's installed, detected in about:plugins, but when I visit adobes's test page at http://www.adobe.com/fr/shockwave/welcome/ , I just get the usual " you need a plugin to view this content" thing.
    This happenned since I migrated from Mageia 1 to Mageia 2, and still doesn't work on Mageia 3, which uses Firefox 17 ESR. I then downloaded and installed Firefox 22 directly from Mozilla, still with no luck. I've reset my profile, tried to use an empty profile, tried disabling all add-ons, still no luck.
    about:plugins displays this:
    File : libflashplayer.so
    Path : /opt/firefox/browser/plugins/libflashplayer.so
    Version : 11,2,202,297
    State : Enabled
    Shockwave Flash 11.2 r202
    This is the most up-to-date flash version available from Adobe.
    Another thing is that this machine is a 32 bits install, on an Athlon XP 3000+ with a Radeon X1650 graphics card. Surprisingly, on another machine, using the same distro but with a 64 bits install, Flash works well.
    I'm out of ideas now, so any hint would be welcome. Thank you.

    Shockwave also known as Shockwave for Director is not the same as the Shockwave Flash Player.
    *https://support.mozilla.org/kb/Using+the+Shockwave+plugin+with+Firefox
    *https://support.mozilla.org/kb/Managing+the+Flash+plugin
    You can test the Flash plugin here:
    *http://www.adobe.com/fr/software/flash/about/
    *http://www.adobe.com/software/flash/about/

  • External screen detected but not working on DisplayPort connection on X220

    I'm running up to date Raring on my Thinkpad X220 and stumbled upon weird problem.
    I can connect to an external 24 inch DELL U2312HM external screen using DisplayPort cable.
    I tried the same connection at work, with similar, but larger screen - 27 inch DELL U2713HM using the same cable.
    When I check >>Settings >> Displays the display is detected. However I'm looking at dark screen.. Bizarrely - when I hit the PrtScr - I can also see it correctly with Ubuntu walpaper o_O
    The monitor is detected and works correctly when using [DisplayPort to DVI-D Adapter Cable (Single Link)] however the resolution on this setup is limited to 1920 x 1200 so I'd really like to take advantage of DVI since the laptop should support it.
    How could I fix this issue?

    Hello,
    According to the specs on Dell's web site, the U2713HM is a WQHD (2560×1440) resolution display and requires a DisplayPort 1.2 compliant signal.  From looking at the PSREF documentation, this resolution is supported on the DisplayPort at a frequency of 60Hz.  There is no mention of DisplayPort version, though.
    Just to confirm, the DisplayPort cable you are using is DisplayPort at both ends and does not have an HDMI or DVI connector attached to the monitor, correct?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • After installing "Maverick" update m Epson V300 scanner software does to work anymore. Epson does not seem to have a compatible driver

    After installing "Maverick" update my Epson V300 scanner software does not work anymore. Epson does not seem to have a compatible driver (yet?).

    It's not just scanners, my WACOM graphic tablet no longer works, am told by WACOM support that Maverick will not recognise it as it is too old!!! Worked perfectly with X 10.8 but not any longer - am well cheesed off as its going to cost me a few bob for a new WACOM!!! Thanks Apple

  • When i plug in my ipod nano (6th generation) a message comes up saying it's 'detected but not identified' i've spend like all day trying to solve it, uninstalled it, reinstalled it and nothing seems to work..

    when i plug in my ipod nano (6th generation) a message on itunes saying the ipod is 'detected but not identified'- i've spent all day trying to fix it and nothing seems to work so i can't sync any songs..

    Hello beafraser,
    Here's an article to help troubleshoot when your iPod is detected but not identified.
    iPod nano: Error message saying that iPod 'could not be identified properly'
    http://support.apple.com/kb/ts3218
    Hope that helps.
    Thank you for visiting Apple Support Communities.
    Nubz

  • Epson Workforce 325 scanner app will not work.

    Recently downloaded Maverick X and now my Epson Workforce 325 scanner app will not work. I have checked for updates through Epson and they say its an Apple problem, but there is none available through Apple. 
    Do I have to go back to the old Mountain Lion 10.8.5 v software?

    You will have no alternative but to wait for Epson to update their drivers to be compatible w/Mavarick.  Why not call them (tech support) or send them an email? 

  • Update to 10.6.8 and HP F2100 and D2400 Printers stopped working. Restored 10.6.7 and printers from Install CD's but not working,  Same with scanner

    Help....
    Updated to 10.6.8 and HP F2100 and D2400 Printers stopped working.
    Restored 10.6.7 and printers from Install CD's but not working.
    Same with F2100 scanner
    Am I glad I kept Windows desktop as without it I would be scre**ed now
    What is going on with this latest update as its like a return to Windows with things crashing or hanging up every few minutes????
    On a MacBook Air that has not been updated everything still works so what has 10.6.8 done and why won't the restore to 10.6.7 work?
    Steve

    None of those things you mentioned were what I suggested.
    I'm guessing the "ctrl click in printer preferences" means you Reset the Printing System?
    If so, that is what I would have suggested if deleting it by selecting the ( - ) button and then adding it with the ( + ) button.
    But, if HP has a fix, it likely needs to update its drivers.

  • IPhone Detected But Not Identified?

    I hooked up my iPhone to my base that goes into my cpu and I got this message: "An iPhones was detected, but could not be identified properly. Please disconnect and reconnect the iPhone and try again." I havent had any problems like this before. Will a reinstall over this iTunes fix the problem? I am running Windows XP. I have also noticed that when I plug up my phone, the Scanner and Camera Wizard pops up recognizing the iPhone as a camera. Also when running iTunes after I got that message, my cpu will freeze for about 5 seconds and work fine a little while then freeze again for 5 seconds. But when I close iTunes, it stops freezing.

    I am having the same issue iPhone detected, but not identified. Did you get a solution to the problem? Had to go to th Apple store to register my phone. iPhone connected fine with their MacBook. That doesn't help me at home though.

  • Android kitkat issue in loading swf file from device. URL found but not working

    Hi,
    I am facing one issue from a very long time regarding file access in Android Kitkat version 4.4.*. I have developed Adobe Air player application for android and it is working as expected below kitkat version but not on kitkat.
    I am following this methods -
    NativeApplication.nativeApplication.addEventListener(InvokeEvent.INVOKE, onInvoke);
    public function onInvoke(event:InvokeEvent):void
                                        var newFile:String = String(event.arguments[0]);
                                        trace("Received new file from Android: "+newFile)
    Received URL form device in Android Kitkat -
    /storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Animation/27 031_1_Welcome screen.swf
    file:////storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Anim ation/27031_1_Welcome screen.swf 
                    -  Loading this URL using loader class in AS3 AIR but not working.
    file%3A///storage/emulated/0/.iProfData/swf/playListFiles/ContentCreation/Ma_V2_522/en/Ani mation/27031_1_Welcome%20screen.swf
           - Have used also by doing escape character but still it is not working showing file not found both SWF and mp4 case. (Mp4 case NetStream.Play.FileNotFound)
    By using the above methods I can have swf or mp4 video url but when I am loading it, It is not working giving error message "File not found/ IO Error". I have read that if use escape character then it will work but I have used escape character also but it is not working.
    Humble request you to please advise how can I solve this issue.
    Best regards,
    Sunil Kumar

    Starting in KitKat, Google requires that applications have permission to access files on the system. You must specifically add either the READ_EXTERNAL_STORAGE or WRITE_EXTERNAL_STORAGE permissions in order to access files. Adding either one of those permissions should let you read/access files on the device. Prior to KitKat, you didnt have to have these permissions listed in the manifest to access files.

  • IPod Nano 6th Gen detected but not recognized

    Since recently, my IPod is not being recognized by iTunes (11.1.4.62 ). The error says that it is detected but not be identified properly. I went through all the troubleshooting steps including resetting my ipod, re-starting the driver, re-installing iTunes but nothing works. Interestingly, if iTunes is not open, I can see the iPod as a storage device, I can open and browse it. So I assume there is no error with the wire, the iPod itself or the driver. As soon as iTunes gives the above error, it stops being visible as a storage device. How can I fix this?

    Aridra,
    Thanks very much for this - I had exactly the same problem; went through the same steps to no avail unitl I read your post.  Similarly, I uninstalled EVERYTHING Apple on my PC and re-installed. Bingo !!  my iPod is now recognised and synched.

  • Updated my iphone 3gs, lost my music and apps, they are backed up on itunes, how do I move them back to my phone, tried to sync but not working, please help

    Updated my iphone 3gs, lost my music and apps, they are backed up on my computer but i cannot move them over to my phone, tried to sync but not working, please help

    well first make sure that when you click on the name of your iphone on the left hand side of itunes that you go to the app and music tab and check mark the sync apps and sync music. then try clicking apply in the bottom right hand corner. then if not try doing it again after going to prefrences in the top menu and going to devices tab and click reset sync history if that doesnt work with music try and drop and drag to the name of your iphone, lastly if that doesnt work you can try restoring from a backup from before you updated. it will keep the new software but put everything that was on your phone when you created the backup back onto your phone.
    http://support.apple.com/kb/HT1351 for syncing music

  • I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    I have CS5 and a d-600. I would like to use camera raw but not working. I downloaded CR 7.3 and still not working. Do I need to upgrade to CS6 ..or just throw it all out the window and get rid of my d-600 ?

    it allows you to use your cr files, Adobe - Adobe Camera Raw and DNG Converter : For Windows
    Camera Raw: How to use Adobe DNG Converter - YouTube

  • Camera Raw 5.1 downloaded and unzipped but not working in CS4. Can't open Nikon D90 NEF files.

    Camera Raw 5.1 downloaded and unzipped but not working in CS4. OS Windows 7. Can't open Nikon NEF files. Camera Nikon D90.

    update the adobe program that needs cr 4.6+,  http://www.adobe.com/downloads/updates/

  • Hi I'm trying to purchase but not working

    Hi I'm trying to purchase but not working. It's telling me to contact apple support. I bought today one time but I can't buy again. I contact the bank and they said there is nothing wrong from their side so the problem only with the apple store. Please advice.

    iTunes and App store
    Contacting the iTunes store
    Phone: 800-275-2273 How to reach a live person: Press 0 four times
    Hours of Operation: Mon-Fri: 9am-5pm ET
    Email: [email protected]

Maybe you are looking for