[SOLVED] Error building cairo-dock-plugin package
I have awn right now, but I hear cairo-dock is more customizable, yet that much harder to set up and it shows. when I yaourt-S cairo-dock it gets all the dependants such as cairo-wglitz, then I yaourt -S cairo-dock-plugins and it gets to building then I get this:
==> cairo-dock-plugins dependencies:
- cairo-dock (package that provides cairo-dock already installed)
- libxxf86vm (already installed)
- vte (already installed)
- alsa-lib (already installed)
- autoconf (already installed)
- automake (already installed)
- intltool (already installed)
- pkgconfig (already installed)
- libtool (already installed)
- perlxml (already installed)
just to prove I have everything. Yaourt goes into building and I end up with:
applet-mixer.c: In function 'mixer_show_hide_dialog':
applet-mixer.c:286: warning: passing argument 1 of 'cairo_dock_build_dialog' from incompatible pointer type
applet-mixer.c:286: error: too many arguments to function 'cairo_dock_build_dialog'
make[3]: *** [libcd_AlsaMixer_la-applet-mixer.lo] Error 1
make[3]: Leaving directory `/tmp/yaourt-tmp-siegemachine/aur-cairo-dock-plugins/cairo-dock-plugins/src/cairo-dock-plugins-1.6.3.1/alsaMixer/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-siegemachine/aur-cairo-dock-plugins/cairo-dock-plugins/src/cairo-dock-plugins-1.6.3.1/alsaMixer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-siegemachine/aur-cairo-dock-plugins/cairo-dock-plugins/src/cairo-dock-plugins-1.6.3.1'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build cairo-dock-plugins package.
Something to do with 'too many arguments' for the 'cairo_dock_build_dialog' ?
Last edited by SiegeMachine (2009-03-28 08:15:10)
[siegemachine@localhost /]$ yaourt -R cairo-dock-plugins
cairo-dock-plugins not found, searching for group...
error: 'cairo-dock-plugins': not found in local db
[siegemachine@localhost /]$ yaourt -R cairo-dock
cairo-dock not found, searching for group...
error: 'cairo-dock': not found in local db
[siegemachine@localhost /]$
So I can't figure out if I do or don't have cairo-dock haha, maybe that could be the problem?
[siegemachine@localhost /]$ yaourt -Ql cairo-dock
error: package "cairo-dock" not found
When I yaourt -S cairo-dock itself it seems to install that all just fine, but for some reason I apparently don't have it right after, any ideas?
Similar Messages
-
Cairo-dock doesn't work with cairo-dock-plugins
I installed cairo-dock 3.1.2-2 and cairo-compmgr-git 20130209-1. It runs without any problem. After installing cairo-dock-plug-ins 3.1.2-1 cairo-dock opens in maintenance mode.
When I try to start it in the console I get the following messages:
[phnx4@002 ~]$ warning : (/tmp/yaourt-tmp-phnx4/aur-cairo-dock/src/cairo-dock-3.1.2/src/gldit/cairo-dock-opengl.c:cairo_dock_initialize_opengl_backend:208)
couldn't find an appropriate visual, trying to get one without Stencil buffer
(it may cause some little deterioration in the rendering) ...
============================================================================
Cairo-Dock version : 3.1.2
Compiled date : Feb 9 2013 09:45:00
Built with GTK : 3.6
Running with OpenGL: 1
============================================================================
warning : (/tmp/yaourt-tmp-phnx4/aur-cairo-dock-plug-ins/src/cairo-dock-plugins-3.1.2/gvfs-integration/cairo-dock-gio-vfs.c:cairo_dock_gio_vfs_init:55)
VFS Deamon NOT found on DBus !
warning : (/tmp/yaourt-tmp-phnx4/aur-cairo-dock-plug-ins/src/cairo-dock-plugins-3.1.2/shortcuts/src/applet-drives.c:cd_shortcuts_list_drives:297)
couldn't detect any drives
warning : (/tmp/yaourt-tmp-phnx4/aur-cairo-dock/src/cairo-dock-3.1.2/src/cairo-dock.c:_cairo_dock_intercept_signal:156)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux 002 3.7.6-1-ARCH #1 SMP PREEMPT Mon Feb 4 10:21:12 CET 2013 i686 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -w 2 -q 1'...
Traceback (most recent call last):
File "/usr/lib/cairo-dock/cairo-dock-unity-bridge", line 25, in <module>
import dbus, dbus.service
ImportError: No module named dbus
I don't know what this means.All the plugins seem to work more or less as long as the shortcuts plugin is unchecked. It still crashes every now an then. I removed cairo-dock and returned back to tint2.
Although this is not solved should I mark this topic as solved? Or should I just leave as it is? -
Looking for a cairo-dock plugin/applet
Does anyone know where i can find/download the terminal/konsole plug-in/applet for cairo-dock. It looks like a miniature version of the terminal, it's also fixed in place when it's executed. I've installed cairo-dock-plugins and cairo-dock-plug-ins-extras from the AUR, but it doesn't seem to be there. Thanks
Edit: I've also spent a while goggling and searching the cairo-dock site.
Last edited by unilx (2013-05-26 18:31:44)pacman -S cairo-dock-plugins
-
[SOLVED] Error building conky 1.8.0 from ABS
Hello,
Since conky 1.8.1 has a bug with fonts, I'm trying to build conky 1.8.0. I got the PKGBUILD from the ABS and modified it to install 1.8.0. I also had to include a fix for curl, found here:
http://aur.archlinux.org/packages.php?ID=31589.
However, during make I get the following error:
make[2]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[2]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[2]: Map '/home/jente/packages/Arch/conky 1.8.0/src/conky-1.8.0' wordt verlaten
make[1]: Map '/home/jente/packages/Arch/conky 1.8.0/src/conky-1.8.0' wordt verlaten
make: *** [install-recursive] Fout 1
==> ERROR: A failure occurred in package().
Aborting...
It says that "nothing has to be done for..."
Here's my PKGBUILD:
pkgname=conky
pkgver=1.8.0
pkgrel=3
pkgdesc='An advanced, highly configurable system monitor for X based on torsmo'
arch=('i686' 'x86_64')
url='http://conky.sourceforge.net/'
license=('custom')
replaces=('torsmo')
makedepends=('pkg-config')
depends=('alsa-lib' 'libxml2' 'curl' 'wireless_tools' 'libxft' 'glib2' 'libxdamage' 'imlib2')
backup=('etc/conky/conky.conf' 'etc/conky/conky_no_x11.conf')
source=("http://downloads.sourceforge.net/project/${pkgname}/${pkgname}/${pkgver}/${pkgname}-${pkgver}.tar.gz"
'current-power.patch')
md5sums=('3fcc5bc005c6c046587134cdb9fdadfa'
'eec51b5ccd242ed95b3b0a0fdd3252f8')
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
patch -p1 < ../current-power.patch # See FS#21984
sed -i '
/#include <curl\/types.h>/ c\
//#include <curl/types.h>' src/eve.c
sed -i '
/#include <curl\/types.h>/ c\
//#include <curl/types.h>' src/ccurl_thread.c
./configure \
--prefix=/usr \
--sysconfdir=/etc \
--enable-ibm \
--enable-curl \
--enable-rss \
--enable-weather-xoap \
--enable-imlib2 \
--disable-lua \
--enable-wlan \
make
package() {
cd "${srcdir}/${pkgname}-${pkgver}"
make DESTDIR="${pkgdir}" install
install -D -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
Last edited by Unia (2011-08-18 10:33:56)I will try to built again and post the full output!
EDIT: Here you go:
┌─[jente@lappy conky 1.8.0][17:07:13]
└─■ LC_ALL=C makepkg -si
==> Making package: conky 1.8.0-3 (Wed Aug 17 17:07:24 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found conky-1.8.0.tar.gz
-> Found current-power.patch
==> Validating source files with md5sums...
conky-1.8.0.tar.gz ... Passed
current-power.patch ... Passed
==> Extracting Sources...
-> Extracting conky-1.8.0.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
patching file src/linux.c
Hunk #1 succeeded at 1654 (offset -17 lines).
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
configure: WARNING: Libtool does not cope well with whitespace in `pwd`
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether gcc and cc understand -c and -o together... yes
checking for pkg-config... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.19... yes
checking for fopencookie... yes
checking for funopen... no
checking for X11... yes
checking for Imlib2... yes
checking iwlib.h usability... yes
checking iwlib.h presence... yes
checking for iwlib.h... yes
checking for iw_sockets_open in -liw... yes
checking for getnameinfo... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking for ld used by GCC... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration... install-shextern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for Xext... yes
checking for XDamage... yes
checking for Xft... yes
checking for GLib2... yes
checking for libcurl... yes
checking for libxml2... yes
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for unistd.h... (cached) yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for sys/stat.h... (cached) yes
checking linux/soundcard.h usability... yes
checking linux/soundcard.h presence... yes
checking for linux/soundcard.h... yes
checking for alsa/asoundlib.h... (cached) yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking semaphore.h usability... yes
checking semaphore.h presence... yes
checking for semaphore.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for sys/mount.h... yes
checking sys/inotify.h usability... yes
checking sys/inotify.h presence... yes
checking for sys/inotify.h... yes
checking for calloc... yes
checking for malloc... yes
checking for free... yes
checking for popen... yes
checking for sysinfo... yes
checking for getloadavg... yes
checking for memrchr... yes
checking for strndup... yes
checking for gethostbyname_r... yes
checking for library containing clock_gettime... -lrt
checking for struct statfs.f_fstypename... no
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for db2x_xsltproc... no
checking for db2x_manxml... no
checking for xsltproc... xsltproc
checking if /usr/bin/ld -m elf_x86_64 accepts -O1... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/build.h
config.status: creating lua/Makefile
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
conky 1.8.0 configured successfully:
Installing into: /usr
System config dir: /etc
C compiler flags: -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W
Libraries: -liw -lncurses -lm -lX11 -lImlib2 -lXext -lXdamage -lXfixes -lXft -lglib-2.0 -lcurl -lxml2 -lasound -lrt
Linker flags: -Wl,-O1
* X11:
X11 support: yes
XDamage support: yes
XDBE support: yes
Xft support: yes
ARGB support yes
* Music detection:
Audacious: no
BMPx: no
MPD: yes
MOC: yes
XMMS2: no
* General:
math: yes
hddtemp: yes
portmon: yes
RSS: yes
Curl: yes
Weather
METAR: yes
XOAP: yes
wireless: yes
IBM: yes
nvidia: no
eve-online: no
config-output: yes
Imlib2: yes
ALSA mixer: yes
apcupsd: yes
I/O stats: yes
* Lua (no) bindings:
Cairo: no
Imlib2: no
Making all in src
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make all-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-linux.o -MD -MP -MF .deps/conky-linux.Tpo -c -o conky-linux.o `test -f 'linux.c' || echo './'`linux.c
linux.c: In function 'update_net_stats':
linux.c:345:12: warning: variable 'has_bitrate' set but not used [-Wunused-but-set-variable]
linux.c: In function 'is_disk':
linux.c:2287:18: warning: 'dev_last' may be used uninitialized in this function [-Wuninitialized]
mv -f .deps/conky-linux.Tpo .deps/conky-linux.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-ccurl_thread.o -MD -MP -MF .deps/conky-ccurl_thread.Tpo -c -o conky-ccurl_thread.o `test -f 'ccurl_thread.c' || echo './'`ccurl_thread.c
mv -f .deps/conky-ccurl_thread.Tpo .deps/conky-ccurl_thread.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-conky.o -MD -MP -MF .deps/conky-conky.Tpo -c -o conky-conky.o `test -f 'conky.c' || echo './'`conky.c
conky.c: In function 'generate_text_internal':
conky.c:761:19: warning: variable 'needed' set but not used [-Wunused-but-set-variable]
conky.c: In function 'draw_each_line_inner':
conky.c:3099:13: warning: 'font_h' may be used uninitialized in this function [-Wuninitialized]
mv -f .deps/conky-conky.Tpo .deps/conky-conky.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-core.o -MD -MP -MF .deps/conky-core.Tpo -c -o conky-core.o `test -f 'core.c' || echo './'`core.c
mv -f .deps/conky-core.Tpo .deps/conky-core.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -lpthread -lm -Wl,--hash-style=gnu -Wl,--as-needed -o conky conky-conf_cookie.o conky-ibm.o conky-smapi.o conky-mpd.o conky-libmpdclient.o conky-moc.o conky-linux.o conky-top.o conky-users.o conky-sony.o conky-i8k.o conky-libtcp-portmon.o conky-tcp-portmon.o conky-x11.o conky-fonts.o conky-hddtemp.o conky-ccurl_thread.o conky-rss.o conky-prss.o conky-weather.o conky-imlib2.o conky-apcupsd.o conky-iconv_tools.o conky-colours.o conky-combine.o conky-common.o conky-conky.o conky-core.o conky-diskio.o conky-entropy.o conky-exec.o conky-fs.o conky-mail.o conky-mixer.o conky-net_stat.o conky-template.o conky-timed_thread.o conky-mboxscan.o conky-read_tcp.o conky-scroll.o conky-specials.o conky-tailhead.o conky-temphelper.o conky-text_object.o conky-timeinfo.o conky-algebra.o conky-proc.o conky-user.o -liw -lncurses -lm -lX11 -lImlib2 -lXext -lXdamage -lXfixes -lXft -lglib-2.0 -lcurl -lxml2 -lasound -lrt
libtool: link: gcc -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed -o conky conky-conf_cookie.o conky-ibm.o conky-smapi.o conky-mpd.o conky-libmpdclient.o conky-moc.o conky-linux.o conky-top.o conky-users.o conky-sony.o conky-i8k.o conky-libtcp-portmon.o conky-tcp-portmon.o conky-x11.o conky-fonts.o conky-hddtemp.o conky-ccurl_thread.o conky-rss.o conky-prss.o conky-weather.o conky-imlib2.o conky-apcupsd.o conky-iconv_tools.o conky-colours.o conky-combine.o conky-common.o conky-conky.o conky-core.o conky-diskio.o conky-entropy.o conky-exec.o conky-fs.o conky-mail.o conky-mixer.o conky-net_stat.o conky-template.o conky-timed_thread.o conky-mboxscan.o conky-read_tcp.o conky-scroll.o conky-specials.o conky-tailhead.o conky-temphelper.o conky-text_object.o conky-timeinfo.o conky-algebra.o conky-proc.o conky-user.o -lpthread -liw -lncurses -lm -lX11 -lImlib2 -lXext -lXdamage -lXfixes -lXft -lglib-2.0 -lcurl -lxml2 -lasound -lrt
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
Making all in doc
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
Making all in lua
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make all-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
Making all in data
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make install-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[3]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/bin"
/bin/sh ../libtool --mode=install /bin/install -c conky '/home/jente/packages/arch/conky 1.8.0/pkg/usr/bin'
libtool: install: /bin/install -c conky /home/jente/packages/arch/conky 1.8.0/pkg/usr/bin/conky
/bin/install: target `1.8.0/pkg/usr/bin/conky' is not a directory
make[3]: *** [install-binPROGRAMS] Error 1
make[3]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
Making install in doc
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/share/man/man1"
/bin/install -c -m 644 conky.1 '/home/jente/packages/arch/conky 1.8.0/pkg/usr/share/man/man1'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
Making install in lua
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make install-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[3]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
test -z "/usr/lib/conky" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/lib/conky"
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
Making install in data
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/etc/conky" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/etc/conky"
/bin/install -c -m 644 conky.conf conky_no_x11.conf '/home/jente/packages/arch/conky 1.8.0/pkg/etc/conky'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in package().
Aborting...
Last edited by Unia (2011-08-17 15:08:43) -
Having trouble building cairo-dock-svn
Hello! Im trying to install cairo-dock on my Arch install.. but for some reason.. whenever it attemps to.. it goes through the process..but then saiys theres an error and build fails.. I dont know if itl help but ill post the entire terminal dialog I get from running makepkg -s --asroot.. Ill just post where I think the problem is starting.. as anyone else ever had this issue?
make[3]: *** [cairo_dock-cairo-dock-draw-opengl.o] Error 1
make[3]: Leaving directory `/home/zack/abs/cairo-dock-svn/src/cairo-dock-build/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/zack/abs/cairo-dock-svn/src/cairo-dock-build/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/zack/abs/cairo-dock-svn/src/cairo-dock-build'
make: *** [all] Error 2
==> ERROR: Build Failed.
thats the most readible output at the tail end of the pkbuild.. alot of it is hard to read so unless you need that I wont give it.How did you get it to work? What desktop environment are you using? what video card (nvidia, ati, intel) and drivers are you using? What happened when it ran once, and what exactly happens now?
-
[Solved] Failure building cairo-xcb
I tried to install "awesome" window manager, Im quite interested in it, and it's dependency is cairo-xcb.
I downloaded cairo-xcb from AUR but I cant install due to some error:
[broi@broi-Archlinux cairo-xcb]$ makepkg -csi
==> Making package: cairo-xcb 1.10.2-2 (Fri Mar 9 10:45:24 CET 2012)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found cairo-1.10.2.tar.gz
-> Found cairo-1.10.0-buggy_gradients.patch
==> Validating source files with md5sums...
cairo-1.10.2.tar.gz ... Passed
cairo-1.10.0-buggy_gradients.patch ... Passed
==> Validating source files with sha256sums...
cairo-1.10.2.tar.gz ... Passed
cairo-1.10.0-buggy_gradients.patch ... Passed
==> Extracting Sources...
-> Extracting cairo-1.10.2.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
/home/broi/Downloads/awesome/cairo-xcb/PKGBUILD: line 26: patch: command not found
==> ERROR: A failure occurred in build().
Aborting...
Last edited by broi (2012-03-09 18:30:09)bohoomil wrote:
broi wrote:/home/broi/Downloads/awesome/cairo-xcb/PKGBUILD: line 26: patch: command not found
This is the answer. Install patch.
thanks.. -
[SOLVED] Error building firefox-aurora from heftig's repository
I'm currently using the aurora package from heftig's repository at : http://pkgbuild.com/~heftig/aurora/ . No troubles with that so far in the time I've been using it (1-2 days).
Sometimes I like to rebuild certain packages to get a bit more of performance (don't expecting a huge increase) but this time I can't manage to build this one.
At some point after spending an hour or so building I get this error and makepkg finishes without building it:
http://www.pastie.org/2106870
I have no clue on what does trigger that error and the only thing I can think so far is if there is some kind of script that is somehow tailored to the server where usually the aurora package is build and that is making it fail on my laptop.
Does anyone experience this or have any clue on what could be causing this error?
Thank you in advance for your help
EDIT:
Building the package in a clean chroot worked. Makes me think about the hosts config file on my system may have some problem. Anyway, solved.
Last edited by ethail (2011-06-23 23:42:25)Ok, i tried to use wiki and build firefox with kde patches and pgo from AUR repository.
I followed the instructions form wiki page you kindly provided, but every time i get:
==> ERROR: 'pacman' failed to install missing dependencies.
i think it's complaining about missing kmozillahelper which is available only in AUR. However i found another repository that includes kmozillahelper package -> no result. Can you give me an advise please?
Last edited by irrlicht (2011-06-30 23:06:17) -
[SOLVED] Errors building archiso i686 within x86_64
[EDIT]
"Solved" this by using arch32-light instead.
=======
Hello -
I'm trying to build an i686 archiso livecd within an x86_64 environment and I'm getting errors.
Here's the command sequence I'm using:
(as root)
pacman -S devtools --noconfirm --needed
linux32 mkarchroot /tmp/somedir base
linux32 mkarchroot -r bash /tmp/somedir
pacman -S git squashfs-tools syslinux devtools cdrkit make nbd mkinitcpio-nfs-utils
At this point pacman throws an error - wrong architecture. I can correct this by running pacman -Syy - the packages will then install.
Next command sequence:
cd /tmp
git clone git://projects.archlinux.org/archiso.git
I then get an error that says "/usr/bin/git command not found (or something along those lines!)
But git is installed and available on that path.
I'm sure I'm doing something really basic & stupid but I don't know what it is - can anyone suggest the solution?
Last edited by clearloon (2011-03-28 12:18:58)Thanks dpreilan - always good to get someone else's experience.
I also had problems using arch32 - as it turns out, you need to use the command "linux32" in front of anythjing outside the chroot. That's probably obviuos to someone more experienced than me but it wasn't apparent from any of the instructions I found online.
Figured it out in the end though! -
[SOLVED] Error building vanilla kernel for PS3
I installed all the base packages for ArchPPC and have chrooted into it. I downloaded/uncompressed kernel 2.6.24 from kernel.org and ran `cp arch/powerpc/configs/ps3_defconfig .config`. The first time, I went straight to make after that. That gave me the error "linux-2.6.24/scripts/gcc-version.sh: line 26: printf: #: invalid number". So I ran pacman -Sy gcc3, then edited my Makefile setting HOSTCC=gcc-3.3, HOSTCXX=g++-3.3, and CC=gcc-3.3.
Now when I run make (after doing make clean) the first error I get is:
include/asm/mmu-hash64.h:437: error: `SID_SHIFT' undeclared (first use in this function)
Any ideas?
Last edited by Erroneous (2008-03-07 21:51:51)You need a ppc64 cross-compiler to build a ps3 kernel. You can use the crosstool pkgbuilds from here: http://kth5.telekommunisten.net/archlinux/crosstools/
All you need to do is to replace the 32 bit ppc targets with powerpc64-unknown-linux-gnu and it should build fine. -
[Solved] Error building perl-test-mock-lwp-dispatch
Hi, I want to install the git version of youtube-viewer but I get the following error with one of its dependecies (perl-test-mock-lwp-dispatch):
Test Summary Report
t/incorrect_usage.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 5 tests but ran 0.
Files=11, Tests=39, 1 wallclock secs ( 0.07 usr 0.00 sys + 0.62 cusr 0.03 csys = 0.72 CPU)
Result: FAIL
Failed 1/11 test programs. 0/39 subtests failed.
Makefile:854: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
And perl-test-mock-lwp-dispatch also fails to build because it's a dependency of the previous package:
==> Missing dependencies:
-> perl-test-mock-lwp-dispatch>=0.02
==> ERROR: Could not resolve all dependencies.
==> ERROR: the build failed
-> Status failed (2): perl-test-mock-lwp-dispatch perl-lwp-useragent-cached
Dependencies for `youtube-viewer-git' are not met, not building...
Last edited by Mercader1902 (2015-04-25 09:03:21)I think perl-appconfig is a dependecy.
I made the installation following the instructions from the git page after installing cpan and now I can also install it directly from AUR. -
[SOLVED]Error while trying to synchronizing package databases...
I got this error when I tried to update my system....:(
[root@hudsonslair pacman.d]# pacman -Suy
:: Synchronizing package databases...
error: failed retrieving file 'current.db.tar.gz' from ftp.gigabit.nu : Connection refused
error: failed retrieving file 'current.db.tar.gz' from ftp.ds.hj.se : Connection refused
error: failed retrieving file 'current.db.tar.gz' from ftp.gigabit.nu : Connection refused
error: failed to synchronize current: Connection refused
error: failed retrieving file 'extra.db.tar.gz' from ftp.gigabit.nu : Connection refused
error: failed retrieving file 'extra.db.tar.gz' from ftp.ds.hj.se : Connection refused
error: failed retrieving file 'extra.db.tar.gz' from ftp.gigabit.nu : Connection refused
error: failed to synchronize extra: Connection refused
error: failed retrieving file 'community.db.tar.gz' from ftp.gigabit.nu : Connection refused
error: failed retrieving file 'community.db.tar.gz' from ftp.ds.hj.se : Connection refused
error: failed retrieving file 'community.db.tar.gz' from ftp.gigabit.nu : Connection refused
error: failed to synchronize community: Connection refused
error: failed to synchronize any databases
[root@hudsonslair pacman.d]#
I then tried to use another server in pacman.d but I got the same result. The good news is that I still got internet working ie. can use firefox and surf to different sites
The server seems to be alive
[root@hudsonslair pacman.d]# ping ftp.gigabit.nu
PING ftp.gigabit.nu (81.170.139.233) 56(84) bytes of data.
64 bytes from h-139-233.A157.cust.bahnhof.se (81.170.139.233): icmp_seq=1 ttl=57 time=1.56 ms
64 bytes from h-139-233.A157.cust.bahnhof.se (81.170.139.233): icmp_seq=2 ttl=57 time=1.54 ms
64 bytes from h-139-233.A157.cust.bahnhof.se (81.170.139.233): icmp_seq=3 ttl=57 time=1.65 ms
Last edited by hudson (2007-08-14 19:22:37)Okey, I have tried all norways, finlands, swedens, germans and usa's mirrors and none of them will work for me. I got the exact same error as stated above! I don't think it's healthy for me to countinue and try out another mirror
I will simply try to reboot my arch and see what will happend..hahaha...this is just crazy!
Last edited by hudson (2007-08-14 17:32:15) -
[solved] error building fluxbox from PKGBUILD
I should preface my post with this note: this is the first time I've run abs, so I may be doing something wrong.
After running abs, I went into extra/x11/fluxbox and ran makepkg --asroot
It ran through the configure script, but when it started to compile, it exited with the error:
main.cc: In function 'void showInfo(std::ostream&)':
main.cc:71: error: 'strlen' was not declared in this scope
Without much hope, I added "#include <string.h>" to main.cc. Much to my surprise, I could then run make and it compiled successfully.
Out of curiosity, I downloaded the source to fluxbox in another dir and tried to compile it... same problem.
So my questions are:
- is this really such a simple and obvious bug in fluxbox's source?
- how did the binary package get built for the arch repos when the PKGBUILD doesn't patch it?
- or am I just missing something that would make it compile as-is?
Last edited by TheAmigo (2008-04-16 17:50:03)One would expect.
I did a bit of searching before resorting to patching the source...
Config instructions - no mention of such a feature
Release notes - no mention of such a feature
Changelog - no mention of such a feature
I found the hints for patching in this fluxbox-wiki page. Which is for 0.9.14 and need some minor adjustments for 1.0.0:
--- src/Window.cc.orig 2007-09-09 10:46:50.000000000 -0500
+++ src/Window.cc 2008-04-15 18:26:39.000000000 -0500
@@ -3963,6 +3963,7 @@
CommandRef raise_and_focus_cmd(new WindowCmd(*this, &FluxboxWindow::raiseAndFocus));
CommandRef stick_cmd(new WindowCmd(*this, &FluxboxWindow::stick));
CommandRef show_menu_cmd(new WindowCmd(*this, &FluxboxWindow::popupMenu));
+ CommandRef maximize_cmd(new WindowCmd(*this, &FluxboxWindow::maximizeFull));
typedef FbTk::Resource<vector<WinButton::Type> > WinButtonsResource;
@@ -4021,7 +4022,7 @@
// setup titlebar
frame().setOnClickTitlebar(raise_and_focus_cmd, 1, false, true); // on press with button 1
- frame().setOnClickTitlebar(shade_cmd, 1, true); // doubleclick with button 1
+ frame().setOnClickTitlebar(maximize_cmd, 1, true); // doubleclick with button 1
frame().setOnClickTitlebar(show_menu_cmd, 3); // on release with button 3
frame().setOnClickTitlebar(lower_cmd, 2); // on release with button 2
It's a frustratingly small patch for something that should arguably be a feature (granted, it's hard to argue for more config options in a WM whose goal is to be small).
I suppose the counter-argument for submitting this is: how many AUR packages should there be? one for every possible combination of desirable features that aren't configurable?
Maybe it's better if I just make notes in the Arch wiki on how to patch it. I'm still trying to get a feel for the Arch community, so I don't know the best way to go with this. -
[Solved] Cairo-Dock Build Failed
Im trying to get cairo-dock up and running but keep getting the message that the build has failed. Tried both manual and with yaourt with same results.
Im still wet behind the ears with this kinda thing so any help would be much appreciated.
Thanks
==> Making package: cairo-dock 1.6.3.1-1 i686 (Wed Jan 21 17:26:27 GMT 2009)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Found cairo-dock-1.6.3.1.tar.bz2 in build dir
==> Validating source files with md5sums...
cairo-dock-1.6.3.1.tar.bz2 ... Passed
==> Extracting Sources...
-> bsdtar -x -f cairo-dock-1.6.3.1.tar.bz2
==> Removing existing pkg/ directory...
==> Entering fakeroot environment...
==> Starting build()...
autoreconf: Entering directory `.'
autoreconf: configure.ac: not using Gettext
autoreconf: running: aclocal --force
autoreconf: configure.ac: tracing
autoreconf: running: libtoolize --force
libtoolize: putting auxiliary files in `.'.
libtoolize: linking file `./ltmain.sh'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
autoreconf: running: /usr/bin/autoconf --force
autoreconf: running: /usr/bin/autoheader --force
autoreconf: running: automake --add-missing --force-missing
autoreconf: Leaving directory `.'
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... no
checking whether NLS is requested... yes
checking for intltool >= 0.35.0... 0.40.5 found
checking for intltool-update... /usr/bin/intltool-update
checking for intltool-merge... /usr/bin/intltool-merge
checking for intltool-extract... /usr/bin/intltool-extract
checking for xgettext... /usr/bin/xgettext
checking for msgmerge... /usr/bin/msgmerge
checking for msgfmt... /usr/bin/msgfmt
checking for gmsgfmt... /usr/bin/msgfmt
checking for perl... /usr/bin/perl
checking for XML::Parser... ok
checking locale.h usability... yes
checking locale.h presence... yes
checking for locale.h... yes
checking for LC_MESSAGES... yes
checking libintl.h usability... yes
checking libintl.h presence... yes
checking for libintl.h... yes
checking for ngettext in libc... yes
checking for dgettext in libc... yes
checking for bind_textdomain_codeset... yes
checking for msgfmt... (cached) /usr/bin/msgfmt
checking for dcgettext... yes
checking if msgfmt accepts -c... yes
checking for gmsgfmt... (cached) /usr/bin/msgfmt
checking for xgettext... (cached) /usr/bin/xgettext
checking for gcc... (cached) gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether gcc accepts -g... (cached) yes
checking for gcc option to accept ISO C89... (cached) none needed
checking dependency style of gcc... (cached) gcc3
checking for ANSI C header files... (cached) yes
checking math.h usability... yes
checking math.h presence... yes
checking for math.h... yes
checking for stdlib.h... (cached) yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.9.0... yes
checking for PACKAGE... yes
checking for XEXTEND... yes
checking for GLITZ... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating cairo-dock.pc
config.status: WARNING: 'cairo-dock.pc.in' seems to ignore the --datarootdir setting
config.status: creating src/Makefile
config.status: creating po/Makefile.in
config.status: creating data/Makefile
config.status: creating data/cairo-dock.conf
config.status: creating data/main-dock.conf
config.status: creating data/default-theme/Makefile
config.status: creating data/default-theme/launchers/Makefile
config.status: creating data/default-theme/icons/Makefile
config.status: creating data/gauges/Makefile
config.status: creating data/gauges/radium/Makefile
config.status: creating data/gauges/radium-fuel/Makefile
config.status: creating data/gauges/battery/Makefile
config.status: creating data/gauges/old-square/Makefile
config.status: creating data/gauges/turbo-night/Makefile
config.status: creating data/gauges/turbo-night-fuel/Makefile
config.status: creating data/gauges/turbo-night-dual/Makefile
config.status: creating data/gauges/rainbow/Makefile
config.status: creating data/gauges/tomato/Makefile
config.status: creating data/gauges/Circle/Makefile
config.status: creating data/emblems/Makefile
config.status: creating data/explosion/Makefile
config.status: creating config.h
config.status: config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default-1 commands
config.status: executing po/stamp-it commands
# INTLTOOL_MAKEFILE
Cairo-Dock will be compiled with the following options :
* Use X Extensions : yes
* Hardware Acceleration : yes
make all-recursive
make[1]: Entering directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1'
Making all in .
make[2]: Entering directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1'
make[2]: Leaving directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1'
Making all in src
make[2]: Entering directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1/src'
Making all in .
make[3]: Entering directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1/src'
gcc -DHAVE_CONFIG_H -I. -I.. -pthread -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/pango-1.0 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng12 -I/usr/include/librsvg-2 -I/usr/include/dbus-1.0 -I/usr/lib/dbus-1.0/include -I/usr/include/libxml2 -DHAVE_GLITZ="1" -DHAVE_XEXTEND="1" -DCAIRO_DOCK_SHARE_DATA_DIR=\""/usr/share/cairo-dock"\" -DCAIRO_DOCK_SHARE_THEMES_DIR=\""/usr/share/cairo-dock/themes"\" -DCAIRO_DOCK_MODULES_DIR=\""/usr/lib/cairo-dock"\" -DCAIRO_DOCK_CONF_FILE=\""cairo-dock.conf"\" -DCAIRO_DOCK_EASY_CONF_FILE=\""cairo-dock_easy.conf"\" -DCAIRO_DOCK_LAUNCHER_CONF_FILE=\""launcher.conf"\" -DCAIRO_DOCK_CONTAINER_CONF_FILE=\""container.conf"\" -DCAIRO_DOCK_SEPARATOR_CONF_FILE=\""separator.conf"\" -DCAIRO_DOCK_THEME_CONF_FILE=\""themes.conf"\" -DCAIRO_DOCK_MAIN_DOCK_CONF_FILE=\""main-dock.conf"\" -DCAIRO_DOCK_DEFAULT_ICON_NAME=\""default-icon.svg"\" -DCAIRO_DOCK_DEFAULT_INDICATOR_NAME=\""default-indicator.png"\" -DCAIRO_DOCK_DEFAULT_DROP_INDICATOR_NAME=\""default-drop-indicator.svg"\" -DCAIRO_DOCK_VERSION=\""1.6.3.1"\" -DCAIRO_DOCK_LOCALE_DIR=\""/usr/share/locale"\" -DCAIRO_DOCK_GETTEXT_PACKAGE=\""cairo-dock"\" -DCAIRO_DOCK_ICON=\""cairo-dock.svg"\" -DCAIRO_DOCK_LOGO=\""cairo-dock-logo.png"\" -std=c99 -O3 -g -ggdb -Wno-unused-parameter -march=i686 -mtune=generic -O2 -pipe -MT cairo_dock-cairo-dock-callbacks.o -MD -MP -MF .deps/cairo_dock-cairo-dock-callbacks.Tpo -c -o cairo_dock-cairo-dock-callbacks.o `test -f 'cairo-dock-callbacks.c' || echo './'`cairo-dock-callbacks.c
cairo-dock-callbacks.c:24:25: error: cairo-glitz.h: No such file or directory
cairo-dock-icons.h:335: warning: inline function 'cairo_dock_update_removing_inserting_icon' declared but never defined
make[3]: *** [cairo_dock-cairo-dock-callbacks.o] Error 1
make[3]: Leaving directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/andy/cairo-dock/src/cairo-dock-1.6.3.1'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Last edited by Andy Mack (2009-01-21 20:21:01)When I yaourt cairo-dock it comes with the wglitz package, but from what I understand you have to get cairo-dock and cairo-dock-plugins, but when I build cairo-dock-plugins it fails while building it
applet-mixer.c:286: error: too many arguments to function 'cairo_dock_build_dialog'
and it stops right after that, any thoughs?
Last edited by SiegeMachine (2009-03-26 01:42:38) -
Caido-dock-plugins won't install
Here's yaourt log:
$ yaourt -S cairo-dock-plugins
==> Downloading cairo-dock-plugins PKGBUILD from AUR...
x PKGBUILD
Comment by: pivonroll on Fri, 28 May 2010 10:34:59 +0000
There is an error in PKGBUILD.
Instead of: $srcdir/$_pkgname-$pkgver-$subversion
it should be: $srcdir/$pkgname-$pkgver-$subversion
Comment by: revel on Mon, 14 Jun 2010 19:49:58 +0000
pivonroll is right, aivee - please update
Comment by: 4javier on Mon, 20 Sep 2010 14:49:44 +0000
It's not an error, is necessary cause name of package is different from name of software (plugins plug-ins)
Here http://aur.pastebin.com/FNG8ae9g is updated version of the package 2.2.0-2
First Submitted: Mon, 24 May 2010 18:40:14 +0000
cairo-dock-plugins 2.1.3-1 : Plugins for cairo-dock
( Unsupported package: Potentially dangerous ! )
==> Edit PKGBUILD ? [Y/n] ("A" to abort)
==> ------------------------------------
==> n
==> cairo-dock-plugins dependencies:
- cairo-dock=2.1.3 (already installed)
- libxxf86vm (already installed)
- vte (already installed)
- alsa-lib (already installed)
- autoconf (already installed)
- automake (already installed)
- intltool (already installed)
- pkgconfig (already installed)
- libtool (already installed)
==> Continue building cairo-dock-plugins ? [Y/n]
==> --------------------------------------------
==>
==> Building and installing package
==> Making package: cairo-dock-plugins 2.1.3-1 (Mon Jan 31 14:08:53 GMT 2011)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
-> Downloading cairo-dock-plugins-2.1.3-9.tar.gz...
--2011-01-31 14:08:53-- http://launchpad.net/cairo-dock-plug-in … 3-9.tar.gz
Resolving launchpad.net... 91.189.89.222, 91.189.89.223
Connecting to launchpad.net|91.189.89.222|:80... connected.
HTTP request sent, awaiting response... 303 See Other
Location: http://launchpadlibrarian.net/44930752/ … 3-9.tar.gz [following]
--2011-01-31 14:08:53-- http://launchpadlibrarian.net/44930752/ … 3-9.tar.gz
Resolving launchpadlibrarian.net... 91.189.89.228, 91.189.89.229
Connecting to launchpadlibrarian.net|91.189.89.228|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 6003152 (5.7M) [application/x-tar]
Saving to: “cairo-dock-plugins-2.1.3-9.tar.gz.part”
100%[======================================>] 6,003,152 703K/s in 8.1s
2011-01-31 14:09:02 (722 KB/s) - “cairo-dock-plugins-2.1.3-9.tar.gz.part” saved [6003152/6003152]
==> Validating source files with md5sums...
cairo-dock-plugins-2.1.3-9.tar.gz ... Passed
==> Extracting Sources...
-> Extracting cairo-dock-plugins-2.1.3-9.tar.gz with bsdtar
==> Entering fakeroot environment...
==> Starting build()...
/tmp/yaourt-tmp-juha/aur-cairo-dock-plugins/./PKGBUILD: line 24: cd: /tmp/yaourt-tmp-juha/aur-cairo-dock-plugins/src/cairo-dock-plug-ins-2.1.3-9: No such file or directory
Aborting...
==> ERROR: Makepkg was unable to build cairo-dock-plugins.
==> Restart building cairo-dock-plugins ? [y/N]I have finally solved my problem... Here is what I did to do so. I must confess that it is someone in a french mac forum that told me how... And I understood better since it was in French.
My problem was related to the fact that my installer did work right. That I knew. In fact, it didn't open niether .dmg nor .pkg files.
I downloaded the pacifist from the net. I took my 'installation and reparation" disk of mac os x and put it in the machine. Be carefull : don't activate the installation program, because you will reformat you hard disc and loose everything (that was what I was really scared of...).
When the disc shows on you desk top, open the pacifist and, with it, go and seek ONLY the component you thing you need to remplace on your hard disc. For me, as I said, it was the installer. So I reinstall the installer, and I could therefore install mpeg2 and finally finish my portfolio.
Hope it can be helpfull for other, as they where for me. Thanks. -
Cairo-dock bar icons are not being displaying correctly
I have an intel HD4000 3rd generation (lvy bridge) and extra/xf86-video-intel 2.21.15-1 (xorg-drivers xorg) installed. My laptop is a i7-3630. When I launch cairo-dock using opengl the icons in the bar are not displayed until I move the mouse over and once displayed, the tooltips are not displayed correctly. I mean, icons appear when the cursor passes over them. This is only happening in 3D panel and curve view. The rest of view, parabolic, static panel, etc... works perfectly.
isn't intel HD4000 compatible with opengl?
Terminal output is:
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-opengl.c:cairo_dock_initialize_opengl_backend:202)
couldn't find an appropriate visual, trying to get one without Stencil buffer
(it may cause some little deterioration in the rendering) ...
============================================================================
Cairo-Dock version : 3.2.1
Compiled date : Apr 24 2013 23:16:20
Built with GTK : 3.8
Running with OpenGL: 1
============================================================================
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:168)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:168)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-module-manager.c:cairo_dock_load_module:168)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-launcher-manager.c:cairo_dock_launch_command_sync_with_stderr:448)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-launcher-manager.c:cairo_dock_launch_command_sync_with_stderr:448)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
_cd_find_volume_name_from_drive_name: assertion 'pDrive != NULL' failed
_cairo_dock_create_surface_from_desktop_bg: assertion 'iRootPixmapID != 0' failed
warning : (/build/cairo-dock-plugins/src/cairo-dock-plugins-3.2.1/switcher/src/applet-load-icons.c:cd_switcher_load_desktop_bg_map_surface:197)
couldn't get the wallpaper
_cairo_dock_create_surface_from_desktop_bg: assertion 'iRootPixmapID != 0' failed
warning : (/build/cairo-dock-plugins/src/cairo-dock-plugins-3.2.1/switcher/src/applet-load-icons.c:cd_switcher_load_desktop_bg_map_surface:197)
couldn't get the wallpaper
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-launcher-manager.c:cairo_dock_launch_command_sync_with_stderr:448)
No se ha establecido un valor para «/desktop/gnome/session/required_components/panel»
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-launcher-manager.c:cairo_dock_launch_command_sync_with_stderr:441)
Falló al ejecutar el proceso hijo «compiz» (No existe el fichero o el directorio)
g_key_file_set_string: assertion 'string != NULL' failed
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-gui-factory.c:_list_icon_theme_in_dir:1009)
Falló al abrir la carpeta «/home/toni/.icons»: No existe el fichero o el directorio
gtk_container_add: assertion 'GTK_IS_CONTAINER (container)' failed
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-gui-factory.c:cairo_dock_build_group_widget:3410)
this conf file has an invalid combo list somewhere !
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-gui-factory.c:cairo_dock_build_group_widget:3410)
this conf file has an invalid combo list somewhere !
warning : (/build/src/cairo-dock-3.2.1/src/gldit/cairo-dock-launcher-manager.c:cairo_dock_launch_command_sync_with_stderr:448)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
g_ptr_array_free: assertion 'array' failed
I have tried what is stated here: https://wiki.archlinux.org/index.php/In … ion_method
but it does not work, using sna hardware acceleration instead of uxa:
/etc/X11/xorg.conf.d/20-intel.conf
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "sna"
EndSection
If I launch cairo as:
$ cairo-dock -c
or
$ env LIBGL_ALWAYS_SOFTWARE=1 cairo-dock -o
then it works.
Also, it seems to be a bug, see here:
https://bugs.freedesktop.org/show_bug.cgi?id=55036
UPDATED to cario-dock 3.3.1 :
After updating cario-dock to last version 3.3.1 now it works even worse!!! tool bar does not appear, netiher panel 3d nor static panel nor parabolic nor curve, ..... and when switching from advanced mode to basic mode it seems to crash and it remains in advanced mode forever.
Output:
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:main:744)
showing the maintenance mode ...
g_ptr_array_free: assertion 'array' failed
g_ptr_array_free: assertion 'array' failed
g_ptr_array_free: assertion 'array' failed
g_object_get_data: assertion 'G_IS_OBJECT (object)' failed
g_object_get_data: assertion 'G_IS_OBJECT (object)' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -c -m -q 4'...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 0
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:main:744)
showing the maintenance mode ...
g_ptr_array_free: assertion 'array' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -c -m -q 5'...
Sorry, Cairo-Dock has encoutered some problems, and will quit.
[toni@toni ~]$ cairo-dock -c
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 0
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
_cd_find_volume_name_from_drive_name: assertion 'pDrive != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -c -w 2 -q 1'...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 0
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
_cd_find_volume_name_from_drive_name: assertion 'pDrive != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -c -w 2 -q 2'...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 0
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
_cd_find_volume_name_from_drive_name: assertion 'pDrive != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -c -m -q 3'...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 0
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:main:744)
showing the maintenance mode ...
^C
[toni@toni ~]$ clear
[toni@toni ~]$ cairo-dock
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_initialize_opengl_backend:179)
couldn't find an appropriate visual, trying to get one without Stencil buffer
(it may cause some little deterioration in the rendering) ...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 1
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_is_blacklisted:54)
This card is blacklisted due to a bug with your video drivers: Intel 4000 HD Ivybridge Mobile.
Please have a look there: https://bugs.freedesktop.org/show_bug.cgi?id=55036
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_post_initialize_opengl_backend:374)
The OpenGL backend will be deactivated. Note that you can force this OpenGL backend by launching the dock with this command: 'cairo-dock -o'
OpenGL Version: 3.0 Mesa 9.2.1
OpenGL Vendor: Intel Open Source Technology Center
OpenGL Renderer: Mesa DRI Intel(R) Ivybridge Mobile
_cd_find_volume_name_from_drive_name: assertion 'pDrive != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -w 2 -q 1'...
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_initialize_opengl_backend:179)
couldn't find an appropriate visual, trying to get one without Stencil buffer
(it may cause some little deterioration in the rendering) ...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 1
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_is_blacklisted:54)
This card is blacklisted due to a bug with your video drivers: Intel 4000 HD Ivybridge Mobile.
Please have a look there: https://bugs.freedesktop.org/show_bug.cgi?id=55036
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_post_initialize_opengl_backend:374)
The OpenGL backend will be deactivated. Note that you can force this OpenGL backend by launching the dock with this command: 'cairo-dock -o'
OpenGL Version: 3.0 Mesa 9.2.1
OpenGL Vendor: Intel Open Source Technology Center
OpenGL Renderer: Mesa DRI Intel(R) Ivybridge Mobile
_cd_find_volume_name_from_drive_name: assertion 'pDrive != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -w 2 -q 2'...
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_initialize_opengl_backend:179)
couldn't find an appropriate visual, trying to get one without Stencil buffer
(it may cause some little deterioration in the rendering) ...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 1
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-utils.c:cairo_dock_launch_command_sync_with_stderr:231)
No se ha establecido un valor para «/desktop/gnome/interface/font_name»
pango_font_description_from_string: assertion 'str != NULL' failed
pango_font_description_get_family: assertion 'desc != NULL' failed
pango_font_description_get_size: assertion 'desc != NULL' failed
pango_font_description_get_size_is_absolute: assertion 'desc != NULL' failed
pango_font_description_get_weight: assertion 'desc != NULL' failed
pango_font_description_get_style: assertion 'desc != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_is_blacklisted:54)
This card is blacklisted due to a bug with your video drivers: Intel 4000 HD Ivybridge Mobile.
Please have a look there: https://bugs.freedesktop.org/show_bug.cgi?id=55036
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_post_initialize_opengl_backend:374)
The OpenGL backend will be deactivated. Note that you can force this OpenGL backend by launching the dock with this command: 'cairo-dock -o'
OpenGL Version: 3.0 Mesa 9.2.1
OpenGL Vendor: Intel Open Source Technology Center
OpenGL Renderer: Mesa DRI Intel(R) Ivybridge Mobile
_cd_find_volume_name_from_drive_name: assertion 'pDrive != NULL' failed
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:_cairo_dock_intercept_signal:182)
Cairo-Dock has crashed (sig 11).
It will be restarted now.
Feel free to report this bug on glx-dock.org to help improving the dock!
info on the system :
Linux toni 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:22:51 CEST 2013 x86_64 GNU/Linux
Couldn't guess if it was an applet's fault or not. It may have crashed inside the core or inside a thread
restarting with 'cairo-dock -m -q 3'...
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/implementations/cairo-dock-glx.c:_initialize_opengl_backend:179)
couldn't find an appropriate visual, trying to get one without Stencil buffer
(it may cause some little deterioration in the rendering) ...
============================================================================
Cairo-Dock version : 3.3.1
Compiled date : Oct 13 2013 12:19:56
Built with GTK : 3.10
Running with OpenGL: 1
============================================================================
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-mail.so' : (libetpan.so.16: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-Recent-Events.so' : (libzeitgeist-1.0.so.1: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/gldit/cairo-dock-module-manager.c:gldi_module_new_from_so_file:160)
while opening module '/usr/lib/cairo-dock/libcd-system-monitor.so' : (libsensors.so.4: no se puede abrir el fichero del objeto compartido: No existe el fichero o el directorio)
warning : (/build/cairo-dock/src/cairo-dock-3.3.1/src/cairo-dock.c:main:744)
showing the maintenance mode ...
Last edited by toni (2013-10-13 17:51:45)trogdor1138 wrote:
I had the same issue when I first tried cairo-dock on my ZenBook (Core i5). In addition to missing icons or backgrounds, everything looked like it was covered in static.
What are you using for your X compositing manager? I'm using OpenBox with LXDE components, so at the time I was using xcompmgr for compositing. I didn't have much success with either OpenGL or Cairo acceleration.
However, I recently switched to using Compton from the AUR as my compositing manager. With Compton everything about cairo-dock works flawlessly using OpenGL. You might give that a try and see if it helps.
Also, if you're on the most recent version of the Intel drivers SNA is now the default acceleration method, so you no longer need to manually enable it in your xorg.conf.d files.
I am using the default that comes with gnome3, mutter.
I have installed in my system the below packages:
extra/mutter 3.10.0.1-1 (gnome)
extra/mutter-wayland 3.10.0.1-2
extra/clutter 1.16.0-1
extra/clutter-gst 2.0.8-1
extra/clutter-gtk 1.4.4-4
extra/mash 0.2.0-3
I have installed compton and also cairo-dock and cairo-dock-plugins. Once I execute it from terminal by doing cairo-dock a lot of errors, the same as posted here in the previous post appear, and automatically advanced config view is opened. THen If first time i swith to basic view, it remains in advanced view, and If a second time I try to switch to basic view, then it exits. Any ideas?
Last edited by toni (2013-10-14 20:41:56)
Maybe you are looking for
-
Dear expert, In our client , one of our user has accidently posted certain document in future date. Since the period are open for 2 months so any one can post the document in any of the date. I want to restrict user so that he will not be able to
-
Write behind cache, DB down, when should the system stop taking new data in
Hello: We are trying to use Coherence for our custom ESB, which is brokering payloads of various size between consumer and provider applications. Before Coherence, stopping our DB meant organization-wide outage for critically important business servi
-
IWeb - Moving iweb site from one mac to another mac.
Hi, I am using iWeb 08 and would like to move the iWeb site that was created on one mac to another mac to continue editing on the other mac. Any one now how to do this. Thanks tsofa
-
Using Planning Sequence in a Process Chain With input variants
Hi, I have a COPY planning function which has multiple FROM and TO options like (From:Fiscal Year To Fiscal Year, From Version TO Version). In the layout they select the options for which they want to COPY and execute the function. How can I replicat
-
Hi experts, I have connected external oracle database and there is a table ABC.How can i find structure of the ABC table in abap? Do i need to use Describe table statement in EXEC ENDEXEC ?? If it is how to?? Reward Guaranteed thanks kaki