[Solved] Error building perl-test-mock-lwp-dispatch

Hi, I want to install the git version of youtube-viewer but I get the following error with one of its dependecies (perl-test-mock-lwp-dispatch):
Test Summary Report
t/incorrect_usage.t (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Parse errors: Bad plan. You planned 5 tests but ran 0.
Files=11, Tests=39, 1 wallclock secs ( 0.07 usr 0.00 sys + 0.62 cusr 0.03 csys = 0.72 CPU)
Result: FAIL
Failed 1/11 test programs. 0/39 subtests failed.
Makefile:854: recipe for target 'test_dynamic' failed
make: *** [test_dynamic] Error 255
And perl-test-mock-lwp-dispatch also fails to build because it's a dependency of the previous package:
==> Missing dependencies:
-> perl-test-mock-lwp-dispatch>=0.02
==> ERROR: Could not resolve all dependencies.
==> ERROR: the build failed
-> Status failed (2): perl-test-mock-lwp-dispatch perl-lwp-useragent-cached
Dependencies for `youtube-viewer-git' are not met, not building...
Last edited by Mercader1902 (2015-04-25 09:03:21)

I think perl-appconfig is a dependecy.
I made the installation following the instructions from the git page after installing cpan and now I can also install it directly from AUR.

Similar Messages

[SOLVED] Error building cairo-dock-plugin package

I have awn right now, but I hear cairo-dock is more customizable, yet that much harder to set up and it shows. when I yaourt-S cairo-dock it gets all the dependants such as cairo-wglitz, then I yaourt -S cairo-dock-plugins and it gets to building then I get this:
==> cairo-dock-plugins dependencies:
- cairo-dock (package that provides cairo-dock already installed)
- libxxf86vm (already installed)
- vte (already installed)
- alsa-lib (already installed)
- autoconf (already installed)
- automake (already installed)
- intltool (already installed)
- pkgconfig (already installed)
- libtool (already installed)
- perlxml (already installed)
just to prove I have everything. Yaourt goes into building and I end up with:
applet-mixer.c: In function 'mixer_show_hide_dialog':
applet-mixer.c:286: warning: passing argument 1 of 'cairo_dock_build_dialog' from incompatible pointer type
applet-mixer.c:286: error: too many arguments to function 'cairo_dock_build_dialog'
make[3]: *** [libcd_AlsaMixer_la-applet-mixer.lo] Error 1
make[3]: Leaving directory `/tmp/yaourt-tmp-siegemachine/aur-cairo-dock-plugins/cairo-dock-plugins/src/cairo-dock-plugins-1.6.3.1/alsaMixer/src'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/tmp/yaourt-tmp-siegemachine/aur-cairo-dock-plugins/cairo-dock-plugins/src/cairo-dock-plugins-1.6.3.1/alsaMixer'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/tmp/yaourt-tmp-siegemachine/aur-cairo-dock-plugins/cairo-dock-plugins/src/cairo-dock-plugins-1.6.3.1'
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Error: Makepkg was unable to build cairo-dock-plugins package.
Something to do with 'too many arguments' for the 'cairo_dock_build_dialog' ?
Last edited by SiegeMachine (2009-03-28 08:15:10)

[siegemachine@localhost /]$ yaourt -R cairo-dock-plugins
cairo-dock-plugins not found, searching for group...
error: 'cairo-dock-plugins': not found in local db
[siegemachine@localhost /]$ yaourt -R cairo-dock
cairo-dock not found, searching for group...
error: 'cairo-dock': not found in local db
[siegemachine@localhost /]$
So I can't figure out if I do or don't have cairo-dock haha, maybe that could be the problem?
[siegemachine@localhost /]$ yaourt -Ql cairo-dock
error: package "cairo-dock" not found
When I yaourt -S cairo-dock itself it seems to install that all just fine, but for some reason I apparently don't have it right after, any ideas?

[SOLVED] Error building conky 1.8.0 from ABS

Hello,
Since conky 1.8.1 has a bug with fonts, I'm trying to build conky 1.8.0. I got the PKGBUILD from the ABS and modified it to install 1.8.0. I also had to include a fix for curl, found here:
http://aur.archlinux.org/packages.php?ID=31589.
However, during make I get the following error:
make[2]: Er hoeft niets gedaan te worden voor 'install-exec-am'.
make[2]: Er hoeft niets gedaan te worden voor 'install-data-am'.
make[2]: Map '/home/jente/packages/Arch/conky 1.8.0/src/conky-1.8.0' wordt verlaten
make[1]: Map '/home/jente/packages/Arch/conky 1.8.0/src/conky-1.8.0' wordt verlaten
make: *** [install-recursive] Fout 1
==> ERROR: A failure occurred in package().
Aborting...
It says that "nothing has to be done for..."
Here's my PKGBUILD:
pkgname=conky
pkgver=1.8.0
pkgrel=3
pkgdesc='An advanced, highly configurable system monitor for X based on torsmo'
arch=('i686' 'x86_64')
url='http://conky.sourceforge.net/'
license=('custom')
replaces=('torsmo')
makedepends=('pkg-config')
depends=('alsa-lib' 'libxml2' 'curl' 'wireless_tools' 'libxft' 'glib2' 'libxdamage' 'imlib2')
backup=('etc/conky/conky.conf' 'etc/conky/conky_no_x11.conf')
source=("http://downloads.sourceforge.net/project/${pkgname}/${pkgname}/${pkgver}/${pkgname}-${pkgver}.tar.gz"
'current-power.patch')
md5sums=('3fcc5bc005c6c046587134cdb9fdadfa'
'eec51b5ccd242ed95b3b0a0fdd3252f8')
build() {
cd "${srcdir}/${pkgname}-${pkgver}"
patch -p1 < ../current-power.patch # See FS#21984
sed -i '
/#include <curl\/types.h>/ c\
//#include <curl/types.h>' src/eve.c
sed -i '
/#include <curl\/types.h>/ c\
//#include <curl/types.h>' src/ccurl_thread.c
./configure \
--prefix=/usr \
--sysconfdir=/etc \
--enable-ibm \
--enable-curl \
--enable-rss \
--enable-weather-xoap \
--enable-imlib2 \
--disable-lua \
--enable-wlan \
make
package() {
cd "${srcdir}/${pkgname}-${pkgver}"
make DESTDIR="${pkgdir}" install
install -D -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/LICENSE"
Last edited by Unia (2011-08-18 10:33:56)

I will try to built again and post the full output!
EDIT: Here you go:
┌─[jente@lappy conky 1.8.0][17:07:13]
└─■ LC_ALL=C makepkg -si
==> Making package: conky 1.8.0-3 (Wed Aug 17 17:07:24 CEST 2011)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving Sources...
-> Found conky-1.8.0.tar.gz
-> Found current-power.patch
==> Validating source files with md5sums...
conky-1.8.0.tar.gz ... Passed
current-power.patch ... Passed
==> Extracting Sources...
-> Extracting conky-1.8.0.tar.gz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
patching file src/linux.c
Hunk #1 succeeded at 1654 (offset -17 lines).
checking for a BSD-compatible install... /bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking whether the C compiler works... yes
checking for C compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... no
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for fgrep... /bin/grep -F
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
configure: WARNING: Libtool does not cope well with whitespace in `pwd`
checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B
checking the name lister (/usr/bin/nm -B) interface... BSD nm
checking whether ln -s works... yes
checking the maximum length of command line arguments... 1572864
checking whether the shell understands some XSI constructs... yes
checking whether the shell understands "+="... yes
checking for /usr/bin/ld option to reload object files... -r
checking for objdump... objdump
checking how to recognize dependent libraries... pass_all
checking for ar... ar
checking for strip... strip
checking for ranlib... ranlib
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking for dlfcn.h... yes
checking for objdir... .libs
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC -DPIC
checking if gcc PIC flag -fPIC -DPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking if gcc supports -c -o file.o... (cached) yes
checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking whether gcc and cc understand -c and -o together... yes
checking for pkg-config... yes
checking for pkg-config... /usr/bin/pkg-config
checking pkg-config is at least version 0.19... yes
checking for fopencookie... yes
checking for funopen... no
checking for X11... yes
checking for Imlib2... yes
checking iwlib.h usability... yes
checking iwlib.h presence... yes
checking for iwlib.h... yes
checking for iw_sockets_open in -liw... yes
checking for getnameinfo... yes
checking netdb.h usability... yes
checking netdb.h presence... yes
checking for netdb.h... yes
checking netinet/in.h usability... yes
checking netinet/in.h presence... yes
checking for netinet/in.h... yes
checking netinet/tcp.h usability... yes
checking netinet/tcp.h presence... yes
checking for netinet/tcp.h... yes
checking sys/socket.h usability... yes
checking sys/socket.h presence... yes
checking for sys/socket.h... yes
checking arpa/inet.h usability... yes
checking arpa/inet.h presence... yes
checking for arpa/inet.h... yes
checking for ld used by GCC... /usr/bin/ld -m elf_x86_64
checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
checking for shared library run path origin... done
checking for iconv... yes
checking for working iconv... yes
checking for iconv declaration... install-shextern size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
checking for Xext... yes
checking for XDamage... yes
checking for Xft... yes
checking for GLib2... yes
checking for libcurl... yes
checking for libxml2... yes
checking alsa/asoundlib.h usability... yes
checking alsa/asoundlib.h presence... yes
checking for alsa/asoundlib.h... yes
checking for snd_pcm_open in -lasound... yes
checking signal.h usability... yes
checking signal.h presence... yes
checking for signal.h... yes
checking for unistd.h... (cached) yes
checking sys/utsname.h usability... yes
checking sys/utsname.h presence... yes
checking for sys/utsname.h... yes
checking for sys/stat.h... (cached) yes
checking linux/soundcard.h usability... yes
checking linux/soundcard.h presence... yes
checking for linux/soundcard.h... yes
checking for alsa/asoundlib.h... (cached) yes
checking dirent.h usability... yes
checking dirent.h presence... yes
checking for dirent.h... yes
checking mcheck.h usability... yes
checking mcheck.h presence... yes
checking for mcheck.h... yes
checking sys/statfs.h usability... yes
checking sys/statfs.h presence... yes
checking for sys/statfs.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking pthread.h usability... yes
checking pthread.h presence... yes
checking for pthread.h... yes
checking semaphore.h usability... yes
checking semaphore.h presence... yes
checking for semaphore.h... yes
checking assert.h usability... yes
checking assert.h presence... yes
checking for assert.h... yes
checking errno.h usability... yes
checking errno.h presence... yes
checking for errno.h... yes
checking time.h usability... yes
checking time.h presence... yes
checking for time.h... yes
checking for sys/mount.h... yes
checking sys/inotify.h usability... yes
checking sys/inotify.h presence... yes
checking for sys/inotify.h... yes
checking for calloc... yes
checking for malloc... yes
checking for free... yes
checking for popen... yes
checking for sysinfo... yes
checking for getloadavg... yes
checking for memrchr... yes
checking for strndup... yes
checking for gethostbyname_r... yes
checking for library containing clock_gettime... -lrt
checking for struct statfs.f_fstypename... no
checking zlib.h usability... yes
checking zlib.h presence... yes
checking for zlib.h... yes
checking for db2x_xsltproc... no
checking for db2x_manxml... no
checking for xsltproc... xsltproc
checking if /usr/bin/ld -m elf_x86_64 accepts -O1... yes
configure: creating ./config.status
config.status: creating Makefile
config.status: creating data/Makefile
config.status: creating doc/Makefile
config.status: creating src/Makefile
config.status: creating src/build.h
config.status: creating lua/Makefile
config.status: creating src/config.h
config.status: src/config.h is unchanged
config.status: executing depfiles commands
config.status: executing libtool commands
conky 1.8.0 configured successfully:
Installing into: /usr
System config dir: /etc
C compiler flags: -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W
Libraries: -liw -lncurses -lm -lX11 -lImlib2 -lXext -lXdamage -lXfixes -lXft -lglib-2.0 -lcurl -lxml2 -lasound -lrt
Linker flags: -Wl,-O1
* X11:
X11 support: yes
XDamage support: yes
XDBE support: yes
Xft support: yes
ARGB support yes
* Music detection:
Audacious: no
BMPx: no
MPD: yes
MOC: yes
XMMS2: no
* General:
math: yes
hddtemp: yes
portmon: yes
RSS: yes
Curl: yes
Weather
METAR: yes
XOAP: yes
wireless: yes
IBM: yes
nvidia: no
eve-online: no
config-output: yes
Imlib2: yes
ALSA mixer: yes
apcupsd: yes
I/O stats: yes
* Lua (no) bindings:
Cairo: no
Imlib2: no
Making all in src
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make all-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-linux.o -MD -MP -MF .deps/conky-linux.Tpo -c -o conky-linux.o `test -f 'linux.c' || echo './'`linux.c
linux.c: In function 'update_net_stats':
linux.c:345:12: warning: variable 'has_bitrate' set but not used [-Wunused-but-set-variable]
linux.c: In function 'is_disk':
linux.c:2287:18: warning: 'dev_last' may be used uninitialized in this function [-Wuninitialized]
mv -f .deps/conky-linux.Tpo .deps/conky-linux.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-ccurl_thread.o -MD -MP -MF .deps/conky-ccurl_thread.Tpo -c -o conky-ccurl_thread.o `test -f 'ccurl_thread.c' || echo './'`ccurl_thread.c
mv -f .deps/conky-ccurl_thread.Tpo .deps/conky-ccurl_thread.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-conky.o -MD -MP -MF .deps/conky-conky.Tpo -c -o conky-conky.o `test -f 'conky.c' || echo './'`conky.c
conky.c: In function 'generate_text_internal':
conky.c:761:19: warning: variable 'needed' set but not used [-Wunused-but-set-variable]
conky.c: In function 'draw_each_line_inner':
conky.c:3099:13: warning: 'font_h' may be used uninitialized in this function [-Wuninitialized]
mv -f .deps/conky-conky.Tpo .deps/conky-conky.Po
gcc -DHAVE_CONFIG_H -I. -DSYSTEM_CONFIG_FILE=\"/etc/conky/conky.conf\" -DPACKAGE_LIBDIR=\"/usr/lib/conky\" -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -MT conky-core.o -MD -MP -MF .deps/conky-core.Tpo -c -o conky-core.o `test -f 'core.c' || echo './'`core.c
mv -f .deps/conky-core.Tpo .deps/conky-core.Po
/bin/sh ../libtool --tag=CC --mode=link gcc -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -lpthread -lm -Wl,--hash-style=gnu -Wl,--as-needed -o conky conky-conf_cookie.o conky-ibm.o conky-smapi.o conky-mpd.o conky-libmpdclient.o conky-moc.o conky-linux.o conky-top.o conky-users.o conky-sony.o conky-i8k.o conky-libtcp-portmon.o conky-tcp-portmon.o conky-x11.o conky-fonts.o conky-hddtemp.o conky-ccurl_thread.o conky-rss.o conky-prss.o conky-weather.o conky-imlib2.o conky-apcupsd.o conky-iconv_tools.o conky-colours.o conky-combine.o conky-common.o conky-conky.o conky-core.o conky-diskio.o conky-entropy.o conky-exec.o conky-fs.o conky-mail.o conky-mixer.o conky-net_stat.o conky-template.o conky-timed_thread.o conky-mboxscan.o conky-read_tcp.o conky-scroll.o conky-specials.o conky-tailhead.o conky-temphelper.o conky-text_object.o conky-timeinfo.o conky-algebra.o conky-proc.o conky-user.o -liw -lncurses -lm -lX11 -lImlib2 -lXext -lXdamage -lXfixes -lXft -lglib-2.0 -lcurl -lxml2 -lasound -lrt
libtool: link: gcc -I/usr/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -Wall -W -march=x86-64 -mtune=generic -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed -o conky conky-conf_cookie.o conky-ibm.o conky-smapi.o conky-mpd.o conky-libmpdclient.o conky-moc.o conky-linux.o conky-top.o conky-users.o conky-sony.o conky-i8k.o conky-libtcp-portmon.o conky-tcp-portmon.o conky-x11.o conky-fonts.o conky-hddtemp.o conky-ccurl_thread.o conky-rss.o conky-prss.o conky-weather.o conky-imlib2.o conky-apcupsd.o conky-iconv_tools.o conky-colours.o conky-combine.o conky-common.o conky-conky.o conky-core.o conky-diskio.o conky-entropy.o conky-exec.o conky-fs.o conky-mail.o conky-mixer.o conky-net_stat.o conky-template.o conky-timed_thread.o conky-mboxscan.o conky-read_tcp.o conky-scroll.o conky-specials.o conky-tailhead.o conky-temphelper.o conky-text_object.o conky-timeinfo.o conky-algebra.o conky-proc.o conky-user.o -lpthread -liw -lncurses -lm -lX11 -lImlib2 -lXext -lXdamage -lXfixes -lXft -lglib-2.0 -lcurl -lxml2 -lasound -lrt
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
Making all in doc
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
Making all in lua
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make all-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
Making all in data
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Nothing to be done for `all'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[1]: Nothing to be done for `all-am'.
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
==> Entering fakeroot environment...
==> Starting package()...
Making install in src
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make install-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[3]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
test -z "/usr/bin" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/bin"
/bin/sh ../libtool --mode=install /bin/install -c conky '/home/jente/packages/arch/conky 1.8.0/pkg/usr/bin'
libtool: install: /bin/install -c conky /home/jente/packages/arch/conky 1.8.0/pkg/usr/bin/conky
/bin/install: target `1.8.0/pkg/usr/bin/conky' is not a directory
make[3]: *** [install-binPROGRAMS] Error 1
make[3]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[2]: *** [install-am] Error 2
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
make[1]: *** [install] Error 2
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/src'
Making install in doc
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/share/man/man1" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/share/man/man1"
/bin/install -c -m 644 conky.1 '/home/jente/packages/arch/conky 1.8.0/pkg/usr/share/man/man1'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/doc'
Making install in lua
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make install-am
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[3]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
test -z "/usr/lib/conky" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/usr/lib/conky"
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/lua'
Making install in data
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/etc/conky" || /bin/mkdir -p "/home/jente/packages/arch/conky 1.8.0/pkg/etc/conky"
/bin/install -c -m 644 conky.conf conky_no_x11.conf '/home/jente/packages/arch/conky 1.8.0/pkg/etc/conky'
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0/data'
make[1]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[2]: Entering directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make[1]: Leaving directory `/home/jente/packages/arch/conky 1.8.0/src/conky-1.8.0'
make: *** [install-recursive] Error 1
==> ERROR: A failure occurred in package().
Aborting...
Last edited by Unia (2011-08-17 15:08:43)

[SOLVED] Error building firefox-aurora from heftig's repository

I'm currently using the aurora package from heftig's repository at : http://pkgbuild.com/~heftig/aurora/ . No troubles with that so far in the time I've been using it (1-2 days).
Sometimes I like to rebuild certain packages to get a bit more of performance (don't expecting a huge increase) but this time I can't manage to build this one.
At some point after spending an hour or so building I get this error and makepkg finishes without building it:
http://www.pastie.org/2106870
I have no clue on what does trigger that error and the only thing I can think so far is if there is some kind of script that is somehow tailored to the server where usually the aurora package is build and that is making it fail on my laptop.
Does anyone experience this or have any clue on what could be causing this error?
Thank you in advance for your help
EDIT:
Building the package in a clean chroot worked. Makes me think about the hosts config file on my system may have some problem. Anyway, solved.
Last edited by ethail (2011-06-23 23:42:25)

Ok, i tried to use wiki and build firefox with kde patches and pgo from AUR repository.
I followed the instructions form wiki page you kindly provided, but every time i get:
==> ERROR: 'pacman' failed to install missing dependencies.
i think it's complaining about missing kmozillahelper which is available only in AUR. However i found another repository that includes kmozillahelper package -> no result. Can you give me an advise please?
Last edited by irrlicht (2011-06-30 23:06:17)

[SOLVED] Errors building archiso i686 within x86_64

[EDIT]
"Solved" this by using arch32-light instead.
=======
Hello -
I'm trying to build an i686 archiso livecd within an x86_64 environment and I'm getting errors.
Here's the command sequence I'm using:
(as root)
pacman -S devtools --noconfirm --needed
linux32 mkarchroot /tmp/somedir base
linux32 mkarchroot -r bash /tmp/somedir
pacman -S git squashfs-tools syslinux devtools cdrkit make nbd mkinitcpio-nfs-utils
At this point pacman throws an error - wrong architecture. I can correct this by running pacman -Syy - the packages will then install.
Next command sequence:
cd /tmp
git clone git://projects.archlinux.org/archiso.git
I then get an error that says "/usr/bin/git command not found (or something along those lines!)
But git is installed and available on that path.
I'm sure I'm doing something really basic & stupid but I don't know what it is - can anyone suggest the solution?
Last edited by clearloon (2011-03-28 12:18:58)

Thanks dpreilan - always good to get someone else's experience.
I also had problems using arch32 - as it turns out, you need to use the command "linux32" in front of anythjing outside the chroot. That's probably obviuos to someone more experienced than me but it wasn't apparent from any of the instructions I found online.
Figured it out in the end though!

[SOLVED] Error building vanilla kernel for PS3

I installed all the base packages for ArchPPC and have chrooted into it. I downloaded/uncompressed kernel 2.6.24 from kernel.org and ran `cp arch/powerpc/configs/ps3_defconfig .config`. The first time, I went straight to make after that. That gave me the error "linux-2.6.24/scripts/gcc-version.sh: line 26: printf: #: invalid number". So I ran pacman -Sy gcc3, then edited my Makefile setting HOSTCC=gcc-3.3, HOSTCXX=g++-3.3, and CC=gcc-3.3.
Now when I run make (after doing make clean) the first error I get is:
include/asm/mmu-hash64.h:437: error: `SID_SHIFT' undeclared (first use in this function)
Any ideas?
Last edited by Erroneous (2008-03-07 21:51:51)

You need a ppc64 cross-compiler to build a ps3 kernel. You can use the crosstool pkgbuilds from here: http://kth5.telekommunisten.net/archlinux/crosstools/
All you need to do is to replace the 32 bit ppc targets with powerpc64-unknown-linux-gnu and it should build fine.

[solved] error building fluxbox from PKGBUILD

I should preface my post with this note: this is the first time I've run abs, so I may be doing something wrong.
After running abs, I went into extra/x11/fluxbox and ran makepkg --asroot
It ran through the configure script, but when it started to compile, it exited with the error:
main.cc: In function 'void showInfo(std::ostream&)':
main.cc:71: error: 'strlen' was not declared in this scope
Without much hope, I added "#include <string.h>" to main.cc. Much to my surprise, I could then run make and it compiled successfully.
Out of curiosity, I downloaded the source to fluxbox in another dir and tried to compile it... same problem.
So my questions are:
- is this really such a simple and obvious bug in fluxbox's source?
- how did the binary package get built for the arch repos when the PKGBUILD doesn't patch it?
- or am I just missing something that would make it compile as-is?
Last edited by TheAmigo (2008-04-16 17:50:03)

One would expect.
I did a bit of searching before resorting to patching the source...
Config instructions - no mention of such a feature
Release notes - no mention of such a feature
Changelog - no mention of such a feature
I found the hints for patching in this fluxbox-wiki page. Which is for 0.9.14 and need some minor adjustments for 1.0.0:
--- src/Window.cc.orig 2007-09-09 10:46:50.000000000 -0500
+++ src/Window.cc 2008-04-15 18:26:39.000000000 -0500
@@ -3963,6 +3963,7 @@
CommandRef raise_and_focus_cmd(new WindowCmd(*this, &FluxboxWindow::raiseAndFocus));
CommandRef stick_cmd(new WindowCmd(*this, &FluxboxWindow::stick));
CommandRef show_menu_cmd(new WindowCmd(*this, &FluxboxWindow::popupMenu));
+ CommandRef maximize_cmd(new WindowCmd(*this, &FluxboxWindow::maximizeFull));
typedef FbTk::Resource<vector<WinButton::Type> > WinButtonsResource;
@@ -4021,7 +4022,7 @@
// setup titlebar
frame().setOnClickTitlebar(raise_and_focus_cmd, 1, false, true); // on press with button 1
- frame().setOnClickTitlebar(shade_cmd, 1, true); // doubleclick with button 1
+ frame().setOnClickTitlebar(maximize_cmd, 1, true); // doubleclick with button 1
frame().setOnClickTitlebar(show_menu_cmd, 3); // on release with button 3
frame().setOnClickTitlebar(lower_cmd, 2); // on release with button 2
It's a frustratingly small patch for something that should arguably be a feature (granted, it's hard to argue for more config options in a WM whose goal is to be small).
I suppose the counter-argument for submitting this is: how many AUR packages should there be? one for every possible combination of desirable features that aren't configurable?
Maybe it's better if I just make notes in the Arch wiki on how to patch it. I'm still trying to get a feel for the Arch community, so I don't know the best way to go with this.

[SOLVED]Can't build perl-text-glob

Hello.
I'm trying to install Clamtk and perl-text-glob is a dependency. Everything works fine until perl-text-glob is trying to build, then I get this error:
Starting build()...
/tmp/yaourt-tmp-root/aur-perl-text-glob/./PKGBUILD: line 27: cd: /tmp/yaourt-tmp-root/aur-perl-text-glob/src/perl-text-glob-0.09: No such file or directory
==> ERROR: A failure occurred in build().
Aborting...
==> ERROR: Makepkg was unable to build perl-text-glob.
I checked the pkgbuild file and line 27 is
cd "$_distdir"
/usr/bin/perl Build.PL
/usr/bin/perl Build
As in perl is not installed, but it is. And the file and directory of perl-text-glob is existing.
What am I missing?
Last edited by Nesrail (2012-06-02 09:07:59)

Allan wrote:
cd "$_distdir"
and then you get....
cd: /tmp/yaourt-tmp-root/aur-perl-text-glob/src/perl-text-glob-0.09
So maybe... _distdir is wrong...
*facepalm* I got it. I changed distdir to /tmp/yaourt-tmp-root/aur-perl-text-glob. Got some errors with Build.PL but got it.
Sorry for filling the forum with dumb questions :-D

[SOLVED] Building perl failed cannot load libperl.so

I'm trying build base packages on another arch (sh4).
Is there any tip about this build error?
yaourt -SAb perl
omit
http://archlinuxarm.org/developers/building-packages
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
==> Starting package()...
./perl: error while loading shared libraries: libperl.so: cannot open shared object file: No such file or directory
==> ERROR: A failure occurred in package().
Aborting...
==> ERROR: Makepkg was unable to build perl.
==> Restart building perl ? [y/N]
==> -----------------------------
$ sudo find . -name libperl.so
./src/perl-5.16.2/libperl.so
temp solution
added LD_LIBRARY_PATH in PKGBUILD of package()
Last edited by dlin (2013-02-02 05:01:39)

I'm trying build base packages on another arch (sh4).
Is there any tip about this build error?
yaourt -SAb perl
omit
http://archlinuxarm.org/developers/building-packages
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
ERROR: ld.so: object 'libfakeroot.so' from LD_PRELOAD cannot be preloaded: ignored.
==> Starting package()...
./perl: error while loading shared libraries: libperl.so: cannot open shared object file: No such file or directory
==> ERROR: A failure occurred in package().
Aborting...
==> ERROR: Makepkg was unable to build perl.
==> Restart building perl ? [y/N]
==> -----------------------------
$ sudo find . -name libperl.so
./src/perl-5.16.2/libperl.so
temp solution
added LD_LIBRARY_PATH in PKGBUILD of package()
Last edited by dlin (2013-02-02 05:01:39)

[SOLVED]Building in a Clean Chroot error: Build failed, check ~/build

Hello everyone
I am trying to build qt4 and qtwebkit in clean chroot but when I run makechrootpkg (according to DeveloperWiki:Building in a Clean Chroot) I get an error message:
$ sudo makechrootpkg -c -r /home/zuargo/chroot/
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
As you see chroot directory is contained in my home folder.
I have checked /home/zuargo/chroot/zuargo/build and I see just the PKGBUILD and another random file (it depends on the package to build). No useful information.
I have made twice the chroot directory and in both times I get the same error.
Does somebody have any idea on how to solve this trouble or how to get information related to the error?
Thanks in advance
Last edited by zuargo (2013-04-19 14:12:53)

Thank you
I have new information.
Searching for information on the forum (this one) I have found this thread: https://bbs.archlinux.org/viewtopic.php?pid=1260353
The user that started the topic, had (or have) a very similar issue. At the first post, he says has fixed the problem by downgrading the package devtools to the version 20120720. So then, I did the same thing.
I had installed devtools 20130408 and in the cache of Pacman, I have the version 20130127, 20130122, 20121115, 20121027, 20121013, 20120720 of this package. I have downgraded to all these versions of devtools, one by one. In some cases, after downgrading and by creating the chroot directory I got errors, either with the package systemd or with the package filesystem. In the first case, the error did not affect the creation fo the chroot directory. In the second case (with filesystem), creating the directory was not successful, getting an error message (see below).
I proceed to list each devtool package (its version) and the error I have got, when I tried to create the chroot directory:
> devtools-20120720-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Also an error with lacale-gen:
chroot: failed to run command '/usr/sbin/locale-gen': No such file or directory
Creating chroot directory successful
No error by building packages with makechrootpkg into the chroot directory.
> devtools-20121013-1-any.pkg.tar.xz
filesystem's error:
( 4/130) installing filesystem [##########################################] 100%
error: could not rename /home/zuargo/chroot/root/etc/resolv.conf to /home/zuargo/chroot/root/etc/resolv.conf.pacorig (Device or resource busy)
error: problem occurred while installing filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages
Creating chroot directory was not successful
> devtools-20121027-1-any.pkg.tar.xz
filesystem's error:
( 4/130) installing filesystem [##########################################] 100%
error: could not rename /home/zuargo/chroot/root/etc/resolv.conf to /home/zuargo/chroot/root/etc/resolv.conf.pacorig (Device or resource busy)
error: problem occurred while installing filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages
Creating chroot directory was not successful
> devtools-20121115-1-any.pkg.tar.xz
filesystem's error:
( 4/130) installing filesystem [##########################################] 100%
error: could not rename /home/zuargo/chroot/root/etc/resolv.conf to /home/zuargo/chroot/root/etc/resolv.conf.pacorig (Device or resource busy)
error: problem occurred while installing filesystem
error: could not commit transaction
error: failed to commit transaction (transaction aborted)
Errors occurred, no packages were upgraded.
==> ERROR: Failed to install packages to new root
==> ERROR: Failed to install all packages
Creating chroot directory was not successful
> devtools-20130122-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Error by building packages with makechrootpkg into the chroot directory:
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
> devtools-20130127-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Error by building packages with makechrootpkg into the chroot directory:
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
> devtools-20130408-1-any.pkg.tar.xz
systemd's error:
( 38/130) installing systemd [##########################################] 100%
Initializing machine ID from random generator.
ln -s '/usr/lib/systemd/system/[email protected]' '/etc/systemd/system/getty.target.wants/[email protected]'
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Error by building packages with makechrootpkg into the chroot directory:
==> Creating clean working copy...done
==> ERROR: Build failed, check /home/zuargo/chroot/zuargo/build
As see, the only one package that allows me to build into chroot directory with no errors is devtools-20120720.
Now I can build packages into a clean chroot directory. But I can't update devtools.

Error building xombrero 1.6.3-1

Hi,
I'm trying to build xombrero 1.6.3.-1 from AUR:
https://aur.archlinux.org/packages/xombrero/
I'm getting the following error building the package:
$ makepkg -s
==> Making package: xombrero 1.6.3-1 (Fri Oct 11 09:51:42 CEST 2013)
==> Checking runtime dependencies...
==> Checking buildtime dependencies...
==> Retrieving sources...
-> Found xombrero-1.6.3.tgz
-> Found LICENSE
==> Validating source files with md5sums...
xombrero-1.6.3.tgz ... Passed
LICENSE ... Passed
==> Extracting sources...
-> Extracting xombrero-1.6.3.tgz with bsdtar
==> Removing existing pkg/ directory...
==> Starting build()...
~/builds/xombrero/src/build-gtk2/xombrero-1.6.3 ~/builds/xombrero/src
make: Entering directory `/home/rodrigo/builds/xombrero/src/build-gtk2/xombrero-1.6.3/linux'
perl ../js-merge-helper.pl ../hinting.js ../input-focus.js \
../autoscroll.js > javascript.h
nroff -c -Tascii -mandoc ../xombrero.1 | \
perl ../ascii2txt.pl | \
perl ../txt2tooltip.pl > tooltip.h
Generating ../about.o.depend
In file included from ../about.c:23:0:
../xombrero.h:296:25: error: missing binary operator before token "("
#if WEBKIT_CHECK_VERSION(1, 5, 0)
^
../about.c:1983:23: error: missing binary operator before token "("
#if GLIB_CHECK_VERSION(2, 32, 0)
^
cc -D_FORTIFY_SOURCE=2 -march=i686 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -I/usr/include/gtk-2.0 -O2 -Wall -ggdb3 -D_GNU_SOURCE -I. -I.. -o ../about.o -c ../about.c
In file included from /usr/include/gtk-2.0/gdk/gdk.h:32:0,
from /usr/include/gtk-2.0/gtk/gtk.h:32,
from ../xombrero.h:94,
from ../about.c:23:
/usr/include/gtk-2.0/gdk/gdkapplaunchcontext.h:30:21: fatal error: gio/gio.h: No such file or directory
#include <gio/gio.h>
^
compilation terminated.
make: *** [../about.o] Error 1
make: Leaving directory `/home/rodrigo/builds/xombrero/src/build-gtk2/xombrero-1.6.3/linux'
==> ERROR: A failure occurred in build().
Aborting...
I don't know what I'm missing. I was able to build xombrero last week in another PC with arch. My current system is upgraded:
Linux 3.11.4-1-ARCH #1 SMP PREEMPT Sat Oct 5 21:40:32 CEST 2013 i686 GNU/Linux
I though that installing thg gnutls library would solve the problem, but unfortunately the error persists after gnutls installation
$ pacman -Ss gnutls
extra/gnutls 3.2.4-1 [Installiert]
A library which provides a secure layer over a reliable transport layer
extra/libtasn1 3.3-1 [Installiert]
The ASN.1 library used in GNUTLS
community/python2-gnutls 1.2.4-2
Python wrapper for the GNUTLS library
Thanks in advance
Last edited by cortezthekiller (2013-10-11 08:35:05)

I've edit the former post to write the error messages in English.
Yes, glib2 is installed, as well as the dependencies mentioned in the aur:
desktop-file-utils
libbsd
webkitgtk3
It seems that the updated PKGBUILD in the comments is just aimed to create two sepparate packages for xombrero & xombrero3. I'll try it, but I don't think this will fix my problem. As a said, I was able to build xombrero in another Pc a few days ago.

[solved] vim build failed

Hi
I am trying to build vim because the version in the repo lacks a couple of options I need (x11...). The build fails without a clear error message, below are the last lines before the makepkg -s fails:
patching file src/cleanlint.vim
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file src/cleanlint.vim.rej
patching file src/diff.c
patching file src/edit.c
patching file src/ex_cmds.c
patching file src/ex_cmds2.c
patching file src/ex_docmd.c
patching file src/proto/ex_cmds.pro
patching file src/proto/spell.pro
patching file src/quickfix.c
patching file src/spell.c
patching file src/structs.h
patching file src/term.h
patching file src/vim.h
patching file src/version.c
==> ERROR: Build Failed.
Aborting...
If the reason is the failed patch is there a way to correct things manually?
This it the (slightly modified) PKGBUILD I am using:
# $Id: PKGBUILD 53395 2009-09-30 20:20:00Z francois $
# Maintainer: tobias [ tobias at archlinux org ]
pkgname=vim
_srcver=7.2
_patchlevel=267
pkgver=${_srcver}.${_patchlevel}
pkgrel=1
pkgdesc='Vi Improved, a highly configurable, improved version of the vi text editor'
arch=(i686 x86_64)
license=('custom:vim')
url="http://www.vim.org"
depends=('gpm' 'coreutils')
makedepends=('wget' 'sed' 'grep' 'gettext' 'perl')
optdepends=('perl: the runtime provides a view useful perl scripts')
backup=(etc/vimrc)
install=${pkgname}.install
# we need the extra-stuff to get all patches applied smoothly
source=(ftp://ftp.vim.org/pub/vim/unix/vim-${_srcver}.tar.bz2 \
ftp://ftp.vim.org/pub/vim/extra/vim-${_srcver}-extra.tar.gz \
ftp://ftp.vim.org/pub/vim/extra/vim-${_srcver}-lang.tar.gz \
fetch_patches.sh fetch_runtime.sh vimrc archlinux.vim)
md5sums=('f0901284b338e448bfd79ccca0041254' '35e04482f07c57221c9a751aaa3b8dac' \
'd8884786979e0e520c112faf2e176f05' '6d7e8d7868e8bfaa9a5880cd9c439320' \
'45c1c3c6aff7de0d8fc2a9d8cd5cec7d' '29125bedc96f2a58c772ee0455a333bc' \
'10353a61aadc3f276692d0e17db1478e')
build()
_versiondir="vim"$(echo ${_srcver} | sed "s/\.//")
# pull in patches from vim.org (or the src cache alternatively)
. ${srcdir}/fetch_patches.sh
. ${srcdir}/fetch_runtime.sh
get_patches || return 1
cd ${srcdir}/${_versiondir}
sed -i 's|^.*$#define SYS_.*VIMRC_FILE.*"$ .*$|\1|' src/feature.h
sed -i 's|^.*$#define VIMRC_FILE.*"$ .*$|\1|' src/feature.h
# build party
./configure --prefix=/usr --localstatedir=/var/lib/vim --mandir=/usr/share/man \
--with-compiledby=Arian --with-features=huge \
--enable-gpm --enable-acl --with-x=yes \
--enable-multibyte --enable-cscope \
--enable-perlinterp --enable-pythoninterpr \
--enable-fontset
#--with-global-runtime=/usr/share/vim --with-vim-name=vim \
make || return 1
make VIMRCLOC=/etc DESTDIR=${pkgdir} install
cd ${pkgdir}/usr/bin
rm ex view # provided by (n)vi in core
mv vim vim-normal # we create a vim-symlink on post_install
ln -sf vim-normal vim
# ... make g* related symlinks point directly to the actual binary
ln -sf vim-normal rview
ln -sf vim-normal rvim
ln -sf vim-normal vimdiff
# delete some manpages
find ${pkgdir}/usr/share/man -type d -name 'man1' 2> /dev/null | \
while read mandir; do
cd ${mandir}
rm -f ex.1 view.1 # provided by (n)vi
rm -f evim.1 # this does not make sense in the console version
done
_runtimedir="${pkgdir}/usr/share/vim/${_versiondir}/"
update_runtime
cd ${srcdir}/${_versiondir}
install -Dm644 ${srcdir}/vimrc ${pkgdir}/etc/vimrc
install -Dm644 ${srcdir}/archlinux.vim \
${pkgdir}/usr/share/vim/vimfiles/archlinux.vim
install -dm755 ${pkgdir}/usr/share/licenses/vim
cd ${pkgdir}/usr/share/licenses/vim
ln -s ../../vim/${_versiondir}/doc/uganda.txt license.txt
Any help appreciated.
Last edited by akuschki (2009-10-22 16:43:34)

thanks, that solved it. Sorry I didn't try that obvious solution myself, I didn't realise that installing gvim would also change the features of the console vim version. I thought those two packages are independent.
Cheers

Error While Genrating Test Report in Test Plan Management

Hi Guru's
I am getting an authorization error while generating test report via STWB_info.
Just i selected the test package and while click the test report i am getting this error.
Error during authorization check
Message no. TWBHS540
Guide Me to solve this issue
thanks in advance
regards
Anandh

Hi,
Please try the following:
Start transaction SMGENDOC03
Do not change anything but just hit the save button.
Afterwards restart transaction STWB_2 and try again to generate again.
Hope this helps.
Cheers
SH

Error building stand alone application, with LV.7.01

Hi to all....
I always get this pop up error (see picture attached) when trying to build a Stand alone application. I got the full version of Labview 7.01 and the Application builder also. the runtime engine is also 7.01.
Regards
HFZ.
HFZ
Solved!
Go to Solution.
Attachments:
Error Building App.JPG ‏51 KB

Hi GardW
All comm. problem are handeled.
The problem was based on the destinations for the .VI's.
Labview 7.1 isn't so got to manage these. It's something the user got to be carefully about.
Allmost solved. But now can't get the default 'labview Icon' to my finnished Application. You know... when you make a stand alone application..
then somewhere under the building process... you can choose if you want your own Icon added as the application starter icon! If you don't choose any.. Labview makes the Labview Icon as your application starter Icon.
And that is my problem now. Any ideas???
Thanks for trying to help , i appriceate it !!
Regards HFZ
HFZ

Error building executable

Bonjour à tous,
Lorsque je terminais ma semaine hier, j'ai voulu réaliser un dernier test sur un Touch Panel, mais lorsque j'ai voulu construire l'executable sous Labview 2009, celui ci m'a affiché cette erreur :
Error building executable. Unable to create file
Quelqu'un saurait d'où vient cette erreur et comment la corriger? Elle est apparue comme ça sans réels changements du code, ce qui d'autant plus étrange!!
Merci pour vos réponses!

J'ai ce type d'erreur de temps en temps, pour moi dans 50% des cas, il suffit de quitter LabVIEW, de ré-ouvrir le projet, relancer le build et ça marche.
Sinon il faut que tu donnes plus de détails...
When my feet touch the ground each morning the devil thinks "bloody hell... He's up again!"

[Solved] Error building perl-test-mock-lwp-dispatch

Similar Messages

Maybe you are looking for