[SOLVED] error occured while loading or saving config information

When I try to launch applications from my menu it takes ages to appear and I get the error:
'an error occured while loading or saving configuration information for 'application name'. Some of your configuration settings may not work properly'
in the details section I get:
'Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or that you have NFS locks due to a system crash. See (a website for gnome's gconf) for details.'
I don't understand this as I don't use gnome, I have openbox.
any help appreciated.
List of affected apps:
firefox
thunderbird
terminator
Apps that load unusually slow:
Thunar
Apps that do nothing:
Banshee
EDIT: If I cannot get this fixed by the end of the week I will have to go back to ubuntu as I need this machine working.
Last edited by llawwehttam (2010-02-09 20:30:52)

Cyrusm wrote:
I think I may have found a solution,
can you print the output of
ls -la ~/ | grep .dbus
apparently this problem can happen if ~/.dbus is owned by root.
to fix it AS ROOT (or sudo)
chown -R $USER:users ~/.dbus
here's my source, there are a few things in here you could try as well.
http://ubuntuforums.org/archive/index.php/t-780179.html
Hahaha, thank you so much.
It was owned by root so I have now fixed that.
It was my own stupid fault then running a command as root that should have been run as a user?
I will never forget this, the embarrassment is killing me..... lol

Similar Messages

The report terminated with error: REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document.

Hi,
I'm getting the below error for reports.
The report terminated with error:
REP-110: File test2. cannot be opened. REP-1070: An error occurred while opening or saving a document. REP-0110: File test2. cannot be opened. .
When checked Environment using url 'http://host:port/reports/rwservlet/showenv?server=your_repserver_name"
found below
==================================================
Reports Servlet Environment Variables 11.1.1.4.0
Security Mode Non-secure
HTTP Environment Variables 11.1.1.4.0
SERVER_NAME   09.14.4.41
SERVER_PORT   8888
SCRIPT_NAME   /rwservlet
SERVER_PROTOCOL   HTTP/1.1
SERVER_SOFTWARE   undefined
GATEWAY_INTERFACE   undefined
SERVER_PORT_SECURE   undefined
ACCEPT   image/jpeg, application/x-ms-application, image/gif, application/xaml+xml, image/pjpeg, application/x-ms-xbap, application/vnd.ms-excel, application/vnd.ms-powerpoint, application/msword, */*
REQUEST_METHOD   GET
REMOTE_HOST   test-wam-app
REMOTE_ADDR   09.14.4.41
REMOTE_USER   undefined
AUTH_TYPE   undefined
PATH_INFO   showenv
QUERY_STRING   server=RptSvr_test-wam-app_wamtest
PATH_TRANSLATED   undefined
CONTENT_LENGTH   undefined
CONTENT_TYPE   undefined
AUTHORIZATION   undefined
USER-AGENT   Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.2; Trident/6.0; .NET4.0E; .NET4.0C; .NET CLR 3.5.30729; .NET CLR 2.0.50727; .NET CLR 3.0.30729; InfoPath.3; MS-RTC LM 8)
REMOTE_IDENT   undefined
REFERER   undefined
Oracle Reports Services - Servlet Environment Variables Select to jump to the top of the page Return to Top
KeyMapFile   /u03/apptest/FMW_11.1.1/user_projects/domains/WamTest/config/fmwconfig/servers/WLS_REPORTS/applications/reports_11.1.1.2.0/configuration/cgicmd.dat
DBAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwdbauth.htm
SYSAUTH   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwsysauth.htm
server   rep_wls_reports_test-wam-app_wamtest1
DIAGNOSTIC   yes
ERRORTEMPLATE   /u03/apptest/FMW_11.1.1/apphome/reports/templates/rwerror.htm
SERVER_IN_PROCESS   yes
COOKIEEXPIRE   30
ENCRYPTIONKEY   reports9i
DIAGHEADTAGS   undefined
DIAGBODYTAGS   undefined
HELPURL   undefined
RELOAD_KEYMAP   undefined
IMAGEURL   http://09.14.4.41:8888/reports/rwservlet
SINGLESIGNON   no
Oracle Reports Services - Server and Engine Environment Variables Select to jump to the top of the page Return to Top
PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/jdk/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/wamtest/FMW_11.1.1/apphome/bin:/u01/java/jdk1.6.0_23/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin
DISPLAY
LD_LIBRARY_PATH   /u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/../lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/native_threads:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64:/u01/wamtest/FMW_11.1.1/apphome/lib:/u01/wamtest/FMW_11.1.1/apphome/jdk/jre/lib/amd64/server:/u01/wamtest/FMW_11.1.1/apphome/opmn/lib:/u01/wamtest/FMW_11.1.1/apphome/lib
ORACLE_HOME   /u01/wamtest/FMW_11.1.1/apphome
TNS_ADMIN   /u01/wamtest/FMW_11.1.1/instance1/config
NLS_LANG   AMERICAN_AMERICA.WE8ISO8859P1
USER_NLS_LANG
RW   /u01/wamtest/FMW_11.1.1/apphome/reports
REPORTS_PATH   /u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:/u01/wamtest/FMW_11.1.1/apphome/reports/templates:/u01/wamtest/FMW_11.1.1/apphome/reports/samples/demo:/u01/wamtest/FMW_11.1.1/apphome/reports/integ:/u01/wamtest/FMW_11.1.1/apphome/reports/printers:/u01/wamtest/FMW_11.1.1/instance1/reports/fonts:
REPORTS_TMP   /tmp
REPORTS_TAGLIB_URI   /WEB-INF/lib/reports_tld.jar
java.class.path   /u01/wamtest/FMW_11.1.1/apphome/reports/jlib/rwrun.jar
sourceDir
tempDir
useDataCache
ignoreDataParameter
=========================================================================
ORACLE_HOME is on mount point u03, checked config.properties but no mention of mount point /u01.
Dont know from where /u01 came. Could you please help me re configuring the env pointing to /u03.
Reports server is up though without any issues.
Regards,
Djay

Ensure that the report name is correct. Also ensure that the report exist in REPORTS_PATH environment variable. Otherwise run the report including the reports path.
E.g.
report=<reports directory>/test2.rdf

Excel, PowerView error in SharePoint 2013: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source."

I've installed SQL Server 2012 SP1 + SP server 2012 + SSRS and PowerPivot add-in.
I also configured excel services correctly. Everything works fine but the powerview doesn't work!
While I open an excel workbook consist of a PowerView report an error occurs: "An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions
to access the data source."
error detail:
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message xmlns="http://www.microsoft.com/sql/reportingservices">An
error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3128.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the
data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3128.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source></Source><Message>For more information about this error navigate
to the report server on the local server machine, or enable remote errors</Message></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices" /></detail>
Please help me to solve this issue. I don't know if uploading the excel workbook is enough or maybe It needed to connect to another data source.
I Appreciate in advance.

Hi Ali.y,
Based on the current error message, the error can be related to the
Claims to Windows Token Service (C2WTS) and is an expected error under certain conditions. To verify the issue, please check the aspects below:
     1. The C2WTS Windows service and C2WTS SharePoint service are both running.
     2. Check the SQL Server Browser service is running on the machine that has the PowerPivot instance of SSAS.
     3. Check the domain. You're signing into SharePoint with a user account in some domain (call it Domain A). When Domain A is equal to Domain B which SharePoint server itself is located (they're the same domain), or Domain
A trusts Domain B.
In addition, the error may be caused by Kerberos authentication issue due to missing SPN. In order to make the Kerberos authentication work, you need to configure the Analysis Services to run under a domain account, and register the SPNs for the Analysis
Services server.
To create the SPN for the Analysis Services server that is running under a domain account, run the following commands at a command prompt:
• Setspn.exe -S MSOLAPSvc.3/Fully_Qualified_domainName OLAP_Service_Startup_Account
Note: Fully_Qualified_domainName is a placeholder for the FQDN.
• Setspn.exe -S MSOLAPSvc.3/serverHostName OLAP_Service_Startup_Account
For more information, please see:
How to configure SQL Reporting Services 2012 in SharePoint Server 2010 / 2013 for Kerberos authentication
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

What does "Error 10" mean? "An error occurred while loading your project. 10"

Does anyone know what "Error 10" means? For the first time, I'm getting a message that says, "An error occurred while loading your project. 10". I'm getting this message when I try to open a project that I created yesterday.
I'm using Adobe Premiere 6 on a Windows 7 machine. I have over 20 gigs of open space on the drive with all the project and support files. And this machine with 2 gigs of RAM never has a problem opening other similar Premeire project files with even more still images plugged in.
All of my Premiere project files have always opened with no problem. A similar file that this project file was created from with all the same base elements still opens with no problem.
This file almost finishes the "Loading Project - checking files..." process, but then I get the error message.
I had also saved a duplicate backup file for the project in question and it will not open either, so I believe that rules out a corrupt file... it is only this one project that I created yesterday that will not open. This project file is only about 5.7 megabytes in size.
This file has many still images plugged in to it, but all the same images are plugged in to another base file that still opens correctly.
I've also tried closing all other apps to save memory but I still get the error. I've also tried opening this problem file from within the application and I still get the same error message.
I read some troubleshooting information on the Adobe website about files that give error messages that will not open and it recommended adjusting the size of the virtual memory paging file in the system settings to twice the amount of RAM that is installed instead of being on the automatic setting, so I followed the instruction verbatim and restarted my machine and I still get the error message.
I've also read other troubleshooting info on the Adobe site that recommends to "delete the application preferences file" and "recreate the plugin cache file", but I'm not sure if "Error 10" indicates that those things are the correct procedures to use.
I could re-create this project file, but it has many tricky cutting and motion setting edits that will be difficult to reproduce and it took me a full day to create this project file.
Also, yesterday before initially closing this file, I was able to successfully render a test version to an AVI file and that video file plays fine, but neither the original project file nor the duplicate will open... I'm always getting the "An error occurred while loading your project. 10" after the file almost finishes the "Loading Project - checking files..." process... it almost finishes opening but then I get the error message.
Thanks for any input on this problem. You can see the error message screenshot below.
digi

Thanks Bill... me too.
After writing to Dennis Radeke on an Adobe.com blog about this and getting his very limited response, I wrote to him quoting something I read on the wiki page that you sent me the link to...
Adobe blog:
http://http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html#co mment-2701
Wiki page link that you gave me:
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
Here's what my response today was...
Thanks for your reply DR.
My old version of Premiere 6 works perfectly on Windows 7. I’ve created over a thousand different Premiere project files on this 5 year-old PC that was updated to Windows 7 last year.
All of my other Premiere 6 files open and maintain their original editability and all the features in this ancient version of Premiere work very well.
I own and use mostly Mac machines but I have one 5 year-old PC with a 160 gig hard drive with Windows 7 that I run Premiere 6 on because it’s a thousand dollar program that I had from 10 years ago that I didn’t want to repurchase. Buying a newer PC 5 years ago was far less expensive than buying a new copy of Premiere. Some people seem to think, “Wow, just buy a new version of the software for a thousand dollars and a new computer with a 5 Terabyte hard drive.”, but that isn’t always the reality of some peoples financial situation.
With 20 gigs of open HD space, all of my previous, even more complex Premiere 6 files still open and edit just fine. It is only this one file that I created Thursday that won’t re-open after closing it for the first time. Since the backup copy of that file won’t open either, and all the support files open, play and work in other previous project files, I’m thinking that there is some glitch that happened when saving this file that is corrupting it now, making it unable to be re-opened.
Based on prior advice on multiple topics about Premiere 6 from people on the Adobe forum who use only newer versions of Premiere, most information that applies to the brand new Premiere Pro CS5 still seems to apply to the old Premiere 6.
I found that holding down Shift-Option while opening Premiere 6 trashes the preferences file. This became my work around since I can’t locate the preferences file based on your path noted (in your blog) nor via the other prefs file path published on the Adobe website.
But unfortunately, trashing the prefs file, resetting the plugin cache file, increasing the virtual memory paging file size, importing the problem project file in to a new project, nor anything else is working to allow this file to open.
Now I’m looking in to XML:Wrench to see if that can find the corruption in this file, but I’ve had a malware warning from one download source and the xmlwrench.com website says their download is only a demo version, but no price is listed… this seems somewhat strange and possibly deceptive.
But I read something on an Premiere Pro wiki page , quoted below, at this URL, that seems to be pertinent, and though my version of Premiere may be ancient, it seems that, according to this user’s concerns, Adobe is still having problems with current versions of Adobe software creating corrupt files…
http://premierepro.wikia.com/wiki/FAQ:How_do_I_recover_a_corrupt_project%3F
QUOTE:
“Can someone please advise – why on EARTH we should have to download XML Wrench and manually fix a corrupt Adobe project??? This is something common to all the Adobe “Support” forums on issues like this, and the many others that plague Adobe’s product (and I’m not being a mindless troll – I’ve been forced to use it for years so I do know the usability and other issues it has): it seems that people are excited because they’ve found a “fix” (which is more like a work-around) – purely because they’re understandably ecstatic that all their hard work isn’t comPLETEly lost.
However, Adobe should be making sure their product isn’t so buggy! This issue should be fixed (as just one example). Adobe should be finding out what causes the corruption in the first place and fixing it. And whether it’s some other codec on the system that’s caused it is no excuse – their software should have better error management built into it. I’ve seen other issues where an Adobe support representative has happily replied: “oh, that’s a known issue since version [3 versions back] – don’t worry, most users are aware of the work around for it: just select and move all of the items in your timeline each time you open the project and you’ll be fine!”
I’m sorry to rant on – but can some other users please explain the above to me? (i.e. why aren’t more people annoyed about this and complaining to Adobe to fix these things).”
UNQUOTE
All of this coming from an experienced user of Adobe products complaining about needing XML:Wrench to fix corrupt Adobe files seems relevant.
In addition, why does no one, including the Adobe knowledge base, have any info about what “An error occurred while loading your project. 10″ means?… why isn’t there a database that identifies Adobe error numbers by the simple number itself? The only info I was able to find identifying “Error 10″ on the Adobe site was a software installation error, not a project loading error.
Now I find myself chasing a clean download of XML:Wrench in order to hopefully fix this corrupt file. Whether I’m using Premiere 6 on a 160 gig hard drive with 20 gigs of open space or Premiere Pro CS5 on a 5 Terabyte hard drive with 3 Terabytes of open space, the problems, according to other users, seem to be the same as ever with corrupt Adobe Premiere files, based on what I’ve been reading across the internet.

INS-08106: Unexpected error occurred while loading the 'InventoryUI'

Hello.
Have done alot of installs over time, but this error has me stymied. Here are the givens:
2-node Linux RHEL 5 OS
Will ASM over fiber (using ASMLib)
Attempting to install Oracle 11gR2 (11.2.0.3.0)
SSH is working and runcluvfy gives no errors on wither nodes.
When running through the installer, I am on the "specify Installation Location" menu.
I input Oracle Base: /apps/oracle
I input Software Location: /apps/grid/product/11.2.0/grid_1
I hit NEXT and afeter a short time, I get the following error:
INS-08106: Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
No further details are given.
I look in the install log for this run and see these last final lines (no errors appear in this log prior):
INFO: Gathering system details
INFO: Checking specified location on remote nodes... (btw - specified path DO exist w/correct perms/ownership)
INFO: size stimation for Completeinstall is 5632.0
INFO: Completed validating state <CRSInstallLocationUI>
INFO: Verifying route INVENTORY_ABSENT
INFO: Get view names [InventoryUI]
INFO: View for [InventoryUI] is oracle.install.ivw.common.view.InventroyUI@58046530
INFO: Initializing view [InventoryUI> at state <inventory>
INFO: Fetching existing UNIX groups
INFO: Terminating all background processes
INFO: Terminated all background procecces
SEVERE: [FATAL] [INS-08016] Unexpected error occurred while loading the view 'InventoryUI' associated to state 'inventory.'
CAUSE: No additional information available.
ACTION: Contact Oracle Support Services or refer to the software manual..
Refer associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1032
INFO: Advice is ABORT
INFO: Adding ExitStatus FAILURE to the exist status set
INFO: Finding the most appropriate exist status for the current application
INFO: Exit Status is -1
INFO: Shutdown Oracle Grid Infrastructure
INFO: Unloading Setup Driver
I realize I can open an SR in MOS, but was hping that maybe someone in this forum had encountered this error previosly and might have some sugestions or a solution that worked for them. The only same error code in MOS relates to to:
Unexptected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI', but this has a fix in /etc/hosts, but is NOT the same error I am getting.
Thank you in advance for any help.
Matt

/etc/hosts file was ok as-is.
Here was the underlying problem that has now been fixed:
We had three user goups associated with user Oracle. They were oinstall, dba, and oper
In /etc/groups, "oper" was not present. During the install, but prior to the actual pressing of the "Install" button, check(s) are made between the groups tied to the installer user and what groups are associated with the same user in /etc/groups. Once "oper" was added to the /etc/groups file, the error disappeared and the install proceeded.
Problem solved. Thanks for any earlier inputs.
Matt

D4O-1009 An error occurred while loading the worksheet

hye everbody
i create a worksheet in discoverer plus olap but i get the error *"D4O-1009 An error occurred while loading the worksheet"..*
even i uninstall the catalog and install the catalog..
when i create the worksheet and saved..of i exit..and try to open back...it show this error..
this is the diagnosis for the connection...
<D4OCheckConfig version="1.0.0.0">
<Check key="JDK version" value="1.6.0_16"/>
<Check key="BI Beans internal version" value="3.2.2.0.24"/>
<Check key="Discoverer Plus OLAP version" value="10.1.2.07.75"/>
<Check key="Discoverer version" value="10.1.2.48.18"/>
<Check key="port" value="-1"/>
<Check key="Connect to database" value="Successful"/>
<Check key="JDBC driver version" value="10.1.0.3.0"/>
<Check key="JDBC JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Database version" value="10.2.0.1.0"/>
<Check key="OLAP API Server version" value="10.2.0.1.0"/>
<Check key="OLAP AW Engine version" value="10.2.0.1.0"/>
<Check key="OLAP Catalog version" value="10.2.0.1.0"/>
<Check key="BI Beans Catalog version" value="3.2.2.0.24"/>
<Check key="Discoverer Catalog version" value="10.1.2.07.75"/>
<Check key="Authorized for Discoverer Plus OLAP catalog" value="Yes"/>
<Check key="OLAP API JAR file version" value="9.2"/>
<Check key="OLAP API JAR file location" value="\TOSHIBA\disco\plus_files\d4o_double.jarjar"/>
<Check key="Load OLAP API metadata" value="Successful"/>
<Check key="Number of metadata folders" value="3"/>
<Check key="Number of metadata measures" value="19"/>
<Check key="Number of metadata dimensions" value="17"/>
this is the error when i save the error in a notepad...
oracle.dss.d4o.common.D4ORuntimeException: D4O-1009 An error occurred while loading the worksheet.
oracle.dss.bicontext.BINamingException: BIB-14099 Unknown naming exception.
oracle.dss.bicontext.BINamingException: BIB-14067 Persistable object threw exception during lookup on method setXMLAsString; component class oracle.dss.dataSource.QueryServer; exception null.
i not have any clue...why this thing occur..
any idea why this thing occur...
thanks in advance....
regards,
rao..

Hi Rao
Please don't keep creating new postings for the same issue as it is hard to keep answering multiple posts about the same thing.
If you have done all of the things suggested by Keith in my previous reply, which as I say is what I would have done, then you really ought to raise this as a service request to Oracle.
I'm advising this because the particular error you are encountering does not come up in my database of fixes neither could I find any reference to it in either the OTN or MetaLink forums. This needs to be brought to Oracle's attention.
Best wishes
Michael

T420i - Power Manager - Error occurred while Loading resource DLL

Hi Team,
I am facing an issue here, wherein, when I try to start the application : Lenove Power Manager, i get the following error msg:
"An error occurred while loading resource DLL". I am not sure how to get this working. Can someone please help me out with this.
Regards,
Surya

Welcome to Lenovo Community! Surya
1. Uninstall existing Power Manager.
2. Download the new Power Manager from the link below and install:
http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014924
Have a nice day!
Peter
W520 (4284-A99)
Does someone’s post help you? Give them kudos as a reward, as they will do better to improve | Mark it as solved if the solution works for you, so it could be reference for others in the future
=====================================
Sound Enthusiast and Enhancement (Post comments, share mixes, etc.)
Dolby Home Theater v4 ; IdeaPad Slate Tablet

Power Manager Gauge: Error Occurred While Loading Resource Dll

Just installed windows 10. An dialog window pops up immediately after logon, saying: Power Manager Gauge: "Error occurred while loading resource dll". The power manager driver was up-to-date using System Update and Windows Update. The windows seems working fine after close the dialog. Event log:Faulting application name: rundll32.exe_PWMTR64V.dll, version: 10.0.10240.16384, time stamp: 0x559f39d6Faulting module name: IMM32.dll_unloaded, version: 10.0.10240.16384, time stamp: 0x559f3b64Exception code: 0xc000041dFault offset: 0x0000000000004c70Faulting process id: 0x17bcFaulting application start time: 0x01d0cc1e64ae9c62Faulting application path: C:\WINDOWS\system32\rundll32.exeFaulting module path: IMM32.dllReport Id: dc5d2634-1815-4621-9b48-fdd9d21c8ba8Faulting package full name:Faulting package-relative application ID:

Solved. The error comes from the scheduled task by Lenovo Settings Power. By disabling the the task in the Task Scheduler, the error went away. This does not affect the function of Lenovo Settings, just make the power information a bit slow to load.

An error occurred while loading the model for the item or data source 'EntityDataSource'.

Hi Team,
We are trying to configure the Power View in SharePoint 2013. We did the entire configuration by following below steps. When we open the excel workbook (2013) containing
Power View sheet (using excel web services) deployed in SharePoint Document library, we get the below error.
“An error occurred while loading the model for the item or data source
'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access the data source.”
Steps followed for configuring Power View in SharePoint Server 2013 (Single Machine setup):
Installed SharePoint Server 2013 Enterprise edition
Did not configure it at this time
Installed SQL Server 2012 with default instance installation (selected every features)
Later installed SP1 for SQL Server 2012
After that installed Analysis Server in SharePoint mode (SQL Server PowerPivot for SharePoint)
Again installed another Analysis Server and selected the tabular mode of data model
Then ran the configuration wizard of Share point 2013 for farm configuration (only for central admin creation)
Later we ran the PowerPivot for SharePoint 2013 (spPowerpivot.msi)
Then using the Power Pivot Configuration tool for 2013 and completed all the steps and configured the excel service and registered the above two analysis service instances.
Questions/Doubts are:
Is our steps followed as mentioned above is correct for configuring Power View in SharePoint Server 2013 Enterprise edition?
Is the SQL Server 2012 Enterprise edition with SP1 installed is sufficient to view Power View sheets in SharePoint 2013 or we need to use the SQL Server 2012 SP1
CTP3 software for Power View feature as mentioned in the below link.
http://technet.microsoft.com/en-us/library/jj219634.aspx
but we don’t have an option to download CTP3 software now from Microsoft site
Or do we need to install
Microsoft SQL Server 2012 With Power View For Multidimensional Models
CTP
http://www.microsoft.com/en-sg/download/details.aspx?id=35822
Few blogs says that SQL Server 2012 instance should have been installed with SP1 at one go (not seperately).
http://www.microsoft.com/en-in/download/details.aspx?id=35575
Error detail :
<detail><ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsCannotRetrieveModel</ErrorCode><HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus><Message
xmlns="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0</HelpLink><ProductName
xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName><ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">11.0.3000.0</ProductVersion><ProductLocaleId
xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId><OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem><CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId><MoreInformation
xmlns="http://www.microsoft.com/sql/reportingservices"><Source>ReportingServicesLibrary</Source><Message msrs:ErrorCode="rsCannotRetrieveModel" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsCannotRetrieveModel&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">An error occurred while loading the model for the item or data source 'EntityDataSource'. Verify that the connection information is correct and that you have permissions to access
the data source.</Message><MoreInformation><Source>Microsoft.ReportingServices.ProcessingCore</Source><Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'EntityDataSource'.</Message><MoreInformation><Source>Microsoft.AnalysisServices.SPClient</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source></Source><Message>We cannot locate a server to load the workbook Data Model.</Message><MoreInformation><Source>Microsoft.Office.Excel.Server.WebServices</Source><Message>We
cannot locate a server to load the workbook Data Model.</Message></MoreInformation></MoreInformation></MoreInformation></MoreInformation></MoreInformation><Warnings xmlns="http://www.microsoft.com/sql/reportingservices"
/></detail>
Please help me in configuring Power View for SharePoint 2013.
Thanks in advance.
Pavan Kumar

I'll bet that I know the answer to this one - and you probably won't like it ;)
Here's the telling portion of that error: "We cannot locate a server to load the workbook Data Model."
This error is thrown in two scenarios; the first, when you haven't registered an analysis server. The second appears to be the issue you're having:
PowerPivot requires SQL Server 2012 SP1. Microsoft issued a release of SQL Server 2012 SP1 that really wasn't SP1...
Check the version of SQL that you are running. It should be version 11.0.3000 or greater. If it's not, you have the wrong "SP1" installed. The correct one is
here.
Here's the bad news- you can't simply redeploy the correct one... because the installer already thinks that SP1 is installed. You'll have to backup (or detach and copy) your databases, then re-install SQL with the correct SP1, then restore or reattach
the databases. Once you've done that, PowerPivot and PowerView will work properly.
I sincerely hope this resolves your issues - we wasted TWO WEEKS of our time with this problem!

I have no problem connecting my i-phone programs to my tv through apple tv. but one program from an application from appstore don't go through apple tv. It says an error occured while loading the content.This is just for one program. All other works good.

My apple TV works fine with my I-Phone 4s. But one program from one of the application I downloaded from the app store dont work. When I load that a message comes "an error occured while loading this program" This is only for one program all other most of the time works good. Any one knows why ?

Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden

Apple TV2 throwing "An error occurred while loading this content"

Hi
I have purchased an Apple TV2 recently and tried to watch rental movies. Preview of all the movies working fine but after rental is consistently giving error "An error occurred while loading this content". I have 8Mbps line and can rent movies from my PC and also from iPad. But Apple TV is giving this error.It also gibe similar error while trying to watch video podcasts of bigger size. I have done the recent apple TV update but no luck. Frustrating. Any help from any one. I have now rentals on my Apple TV that can not viewed and going to expire in 3 weeks.
Regards
Anil

are you renting these movies directly from the appleTV or are you renting/downloading from iTunes on a computer then streaming to appleTV?

WPC Error- Cannot render container : An error occurred while loading the do

Dear All
we are on SP13 / EP 7 ..we have created sites using WPC and when we try to trasnport with GUIDSs we got to know that SP13 does not suport GUIDs ..so i have deplyoed SP14 WPC abd the interfase looks differnt and it gives erros ..again i undeployed the SP14 WPC and deployed the SP13 WPC , after that interfase looks ok but we are getting an error in when we try to edit pages through WPC..
following messgae appera when we open up a page to edit in WPC
Cannot render container : An error occurred while loading the document from the resource content
we found this exception in error log in Server..
couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
#1.5 #00145ECC9C6700780000002500000B80000463656B4E6BC6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(142)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###Couldn't read content with ID -1. Select again...#
#1.5 #00145ECC9C6700780000002600000B80000463656B4E78E6#1235187149283#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#sap.com/irj#com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Warning##Plain###couldn't retrieve contents with id -1#
#1.5 #00145ECC9C6700780000002700000B80000463656B4E812B#1235187149283#com.sapportals.wcm.WcmException#sap.com/irj#com.sapportals.wcm.WcmException.WcmException(62)#myadmin#224##myportalci.keells_JPP_15308650#myadmin#212fdd70ffc811dda6de00145ecc9c67#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Plain###couldn't retrieve contents with id -1 com.sapportals.wcm.util.content.ContentException: couldn't retrieve contents with id -1
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.getInternalStream(DBContentInputStream.java:345)
     at com.sapportals.wcm.repository.manager.cm.persistence.DBContentInputStream.<init>(DBContentInputStream.java:50)
     at com.sapportals.wcm.repository.manager.cm.persistence.BasicPersistenceDB.selectDocumentContent(BasicPersistenceDB.java:1632)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:143)
     at com.sapportals.wcm.repository.manager.cm.persistence.commonjdbc.DBContent.getInputStream(DBContent.java:95)
     at com.sapportals.wcm.repository.ContentImpl$ContentWithPrefetchedInputStream.<init>(ContentImpl.java:402)
Please tell us how to fix this error
regards
Buddhike

Need to upgarde to SP14

INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI'

Hi
I got the below error message while installing the Oracle 11g R2 Database Grid software on Oracle Linux 6.4 OS using vnc viewer.
"INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'."
Please let me know how to overcome this error and proceed with the installation.
Contents of the error log file:
java.lang.NullPointerException
at oracle.sysman.oii.oiin.OiinNetOps.addNICInfo(OiinNetOps.java:144)
at oracle.sysman.oii.oiin.OiinNetOps.computeNICList(OiinNetOps.java:109)
at oracle.sysman.oii.oiin.OiinNetOps.<init>(OiinNetOps.java:76)
at oracle.sysman.oii.oiin.OiinNetOps.getNetOps(OiinNetOps.java:90)
at oracle.sysman.oii.oiix.OiixNetOps.getFullHostName(OiixNetOps.java:49)
at oracle.install.library.util.MachineInfo.getFullHostName(MachineInfo.java:109)
at oracle.install.library.db.RAC92Info.is92RACPresent(RAC92Info.java:115)
at oracle.install.ivw.crs.view.InstallTypeGUI.onEvent(InstallTypeGUI.java:120)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
---# Begin Stacktrace #---------------------------
ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:458
oracle.install.commons.flow.FlowException: [INS-08106] Unexpected error occurred while loading the view 'GridPlugPlayInfoUI' associated to state 'GridPlugPlayInfoUI'.
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:510)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor.access$001(AbstractGraphicalFlowExecutor.java:39)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:99)
at oracle.install.commons.flow.AbstractGraphicalFlowExecutor$1.call(AbstractGraphicalFlowExecutor.java:98)
at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
at java.util.concurrent.FutureTask.run(FutureTask.java:123)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: java.lang.NullPointerException
at oracle.install.library.crs.CRSInfo.getDefaultIPAddressForGNSVIP(CRSInfo.java:584)
at oracle.install.ivw.crs.view.GridPlugPlayInfoUI.onEvent(GridPlugPlayInfoUI.java:373)
at oracle.install.commons.flow.AbstractFlowExecutor.loadView(AbstractFlowExecutor.java:508)
... 12 more
---# End Stacktrace #-----------------------------

Hello,
It's a Bug.
Try selecting all languages and give a try ...
Bug 9632373: UNEXPECTED ERROR OCCURRED WHILE LOADING THE VIEW 'GRIDPLUGPLAYINFOUI'
<Moderator Edit - deleted MOS Doc content - pl do not post such content - it is a violation of your Support agreement>
Thank you

ATV2: Error occurred while loading this content

This error started appearing out of the blue today. And I'm nearly at my wits end with this, because no solution I could possibly think of makes any difference. I would get this error intermittently once a month or so, but unplugging ATV2 and doing a cold start would usually resolve this.
Any ideas? Anyone?
Symptoms:
"An error occurred while loading this content" appears
It appears exclusively for movies, TV shows and music in my iTunes library
It affects all media - nothing in my iTunes library will play
Streaming of purchased content form iTunes store is not affected by this error
I am able to play my iTunes content on my Mac
I am able to play my iTunes content on a different Mac via HomeSharing
I am unable to play any media stored in my iTunes library on my ATV. Period.
What I've tried (to no avail):
Power cycled my cable modem (DOCSIS 3 compliant)
Power cycled my AirPort
Power cycled my Mac
Power cycled my ATV2
Logged out of iTunes store on Mac and ATV2 and logged back in
Turned off Home Sharing on Mac and ATV2 and started it up again
My setup:
I have a 25+ mbps cable internet
Airport Extreme is my main router
Mac is connected to AE via ethernet (it houses my iTunes library and has WiFi shut off)
ATV2 is connected to AE via ethernet as well
Both Mac and ATV2 have reserved IP addresses on Airport Extreme and always get the same IP, no conflicts
Both Mac and ATV2 have a good connection speed when tested
All software and firmware is up to date and Mac, AE and ATV2

You are definitely NOT the only one here with this MAJOR issue: http://discussions.apple.com/thread.jspa?threadID=2615363
I have the same issue, and I have a 6MB AT&T Elite Pro DSL service that I have always had since purchasing my ATV2 in October. Never have I had these issues until the 4.2 update. Horrible software bug and it keeps coming back up. TV shows, movies, etc. No rhyme or reason. Some shows new, some old. Some movies HD, some SD. It is almost as if the Apple TV rolls a die and if I get an odd number, I get the error message. Even number, it plays through...
Why would Apple continue to release software updates that do not address these issues? We have to keep leaving Apple feedback on this issue that is big enough that over 13,000 views on their own message board confirm this problem since the 4.2 software update a few weeks ago...
Tell your friends: http://www.apple.com/feedback/appletv.html

Apple tv error occured while loading this content

error occured while loading this content

Hi there Mundaplackel!
I have an article here for you that can help you troubleshoot the functionality of that app that you have purchased from the app store, and should be able to give you some steps that will help you resolve the issue:
iOS: Troubleshooting applications purchased from the App Store
http://support.apple.com/kb/TS1702
Thanks for using the Apple Support Communities!
Cheers,
Braden

[SOLVED] error occured while loading or saving config information

Similar Messages

Maybe you are looking for