[SOLVED]Error while Checking Filesystems
During the boot process, the system displays an error while checking /dev/sda4
It shows this:
/dev/sda4: recovering journal
Error reading block 18491121 (Attempt to read block from filesystem resulted in short read) [FAIL]
*********** FILESYSTEM CHECK FAILED ************
* Please repair manually and reboot. Note that the root *
* file system is currently mounted as read-only. To *
* remount it read-write type: mount -n -o remount,rw / *
* When you exit the maintenance shell the system will *
* reboot automatically. *
Give root password for maintenance
(or type Control-D to continue)
This has never happened before, and my system has been working fine for a few weeks before now. This occurred after I accidentally unplugged my laptop's ac adapter, resulting in my computer's power being turned off. This problem is probably a result of the unclean unmounting of the filesystem.
Anyone have any idea how I could go about fixing this?
Thanks
Canas
Last edited by Canas (2010-03-23 14:51:40)
Type in your root password, and then type in "fsck". That is the equivalent of the Windows CHKDSK. Once it finishes, reboot your system. It's really not that hard to fix!
EDIT: Never mind, although you can try this I don't think it will work.
Last edited by schen (2010-03-23 00:12:08)
Similar Messages
-
Error while checking in and storing: C:\Documents and Settings
Hi,
i have some problem in DMS , while doing Check in process after attaching documents in CV01n.
geeting error like "Error while checking in and storing: C:\Document and Settings.."
please suggest me how to solve this problem.
thx in advance...
Karthik.Hi Karthik,
There may be several factors contributing to this error.Some of these maybe:
-Storage category defined improperly/missing
-HTTP/FTP destination missing
-Incomplete Workstation application definition
-Incomplete Authorization
Please run through/search for each of these issues (discussed several times in the forum) and adopt corrective action wherever necessary.
Regards,
Pradeepkumar Haragoldavar -
Error while checking in and storing: C:Userscbt.abapDesktopLOP.XLS
Dear Friends,
I am trying to save the documnet in content server but getting the below error:
Error while checking in and storing: C:\Users\cbt.abap\Desktop\LOP.XLS
Message no. 26253
I hv checked CSADMIN certificate , is activated
In DC20 - i hv maintained data carrier type as PC for front end
and i hv all the authorizations, still I am getting this error
pl check and tell the steps to solve this issue.
regards,
Atul TulaskarHi Atul,
please see the information under http://wiki.sdn.sap.com/wiki/display/PLM/26253-Reasonforthiserror which should be useful to find out more about possible reasons for this error message.
Best regards,
Christoph -
Error while check-in CAF DC on NWDI "No prefix found"
Hi experts!
I receive The following error when I try to Check-in a CAF DC on NWDS.
FAILED: No prefix found for development component "mycompany/name/caf/dictionary"
Appropriate development component prefix should be configured in SLD (Restart IDE after reconfiguring SLD).;
I already tried the solutions described on this threads:
Error while Check-in DC's on NWDI: No Prefix found for DC
Problem With Checkin
CAF check-in to NWDI error
No prefix found for development component
None solved to me.
After I receive that error message I did:
- Reserved the name prefix "mycompany/name/caf" on SLD on category "Development Component Name" with purpouse "Used everywhere"
- Enabled the option "Enable this SLD as Name Server for NWDI"
- Registered the NWDI on SLD as "Landscape" with type "NWDI Systems" and two systems, one with type CMS and another with type SLD.
- Stop/Start SLD
- Stop/Start NWDI
- Update CMS on NWDI.
The problem is still happening. The NWDI version is 7.1 SP4.
Any ideas?Thanks Jan! It solved!
I have already created another workspace after all the tests just to be sure that the problem wasn´t on NWDS.
It solved to me when I removed the reservation on SLD and recreated.
Thank you so much!
Gabriela -
DOCMAS Error while checking in and storing
HI Gurus,
i need to send Documents from one system to an other System. I use BDA5
Both system are using different File Systems and the DMS Archive is also different.
I can send the DOCMAS without errors. When i Try to process the Documents i can not process IDocs which have a file (Segment E1DRAWFILES) included. i get the Error messages Error while checking in and storing
I also sent some IDocs which have no files (no segment E1DRAWFILES) and these can be processed. Has anybody an idea whats wrong? If i use normal transaction CV0xN i can upload and checkin documents.
How can i convince SAP to successfully process the IDocs with files from the source system?
Thanks in Advance
UdoProblem was solved. We needed to set the Flag Original Distribution in the IDoc via a Conversion Rule (BD79).
-
DMS "Error while checking in and storing"
Guys,
I am facing a problem like this.
I am doing UNIT testing in client 220 and as i am in consultant id i can able to check in the original and while saving there is no issue with DIR SAVING.
But when the core team wanna save any originals in DIR ,check in and while saving they receive a message like "Error while checking in and storing:C:\Documents and Settings\u\Desktop\New Microsoft
I feel its an authorization problem which should be given to CORE team.
Help me out how to solve this issue.
Regards,
Murali.S
Points will be rewarded for sure.hi
What are you actually trying to do?
im not able to get it correctly
are you using CAD Integration or just normal cv01n
If core team needs to checkin the docu they should have autho for cv01n and in PFCG u can go to authorization and ask basis to add check in function and assign the role to Core team.
your Basis team ll help u out
Reply
Niranjan -
E26 253 Error while checking in and storing: \\sapserver\file.tif
Hi Experts,
I have now been fighting with this problem for a couple of weeks, and not been able to solve the issue.
My problem is to upload/check-in documents from the application serve in background.
I have a program to create DIF and attach files using BAPI_DOCUMENT_CREATE2.
When I'm running the program in foreground there is no problem.
When I run it in background I get the error message E26 254 Error while checking in and storing:
sapserver\file.tif
I have checked that the background process can see the document on the server and that is OK, so the problem must be within the actual storing of the document in DMS in the BAPI.
Any input to how I can solve this issue is appreciated.
Thanks in advance,
ThomasHi All,
We have now done some testing.
We got it to work on one of our systems but not on the other
I ran report RSCMST on both systems with the same backend directory. (A directory on the application server of the one that fails).
Running this report I get this result on the system that does not work.
HTTP interface test using function group SCMS_HTTP
21.06.2010 14:39:01
serverInfo:
contRep ZEBAN
contRepDescription PR Attachments
serverStatus running
serverVendor Copyright SAP AG, All rights reserved 1998, 2001
serverVersion 6300
serverBuild 193
serverTime 123902
serverDate 21.06.2010
serverStatusDescription
pVersion 0046
contRepStatus data(89%) log(1%)
contRepStatusDescription
ok 58.848
create(1): new doc (frontend) ok 445.211
create(2): new doc (back end)
check_subrc: subrc 2 instead 0
check_subrc: HTTP error: 400 Bad Request
create(2): new doc (back end) error
docGet/create(1): copy document ok 105.684
info(1): existing doc ok 26.881
update(1): new comp ok 47.050
info(2): after update ok 30.458
delete(1): unknown doc ok 33.061
delete(2): unknown comp ok 31.669
delete(3): existing doc ok 53.330
delete(4): deleted doc ok 34.781
delete(5): existing doc ok 31.088
putCert: ok 35.785
1 errors
Any ideas to what could be wrong?
Thanks in advance. -
KEU1 -Error while checking dependency of characteristics (Message KF438)
Creating an assessment cycle for transfering costs from cost centers to profitability segments and filling the receivers "Sales order Group" and "Sales order item" appears the message error KF438:
Error while checking dependency of characteristics
Message no. KF438
Diagnosis
Error with dependent characteristics: not all of the higher-level characteristics have been supplied with at least a single value.
Does someone know as this solves?
Greetings.Hi Eduardo,
There is a validation for a dependent characteristic which cannot be checked.
Please check the long text of message KF439 and proceed accordingly.
If not please check note 580026, although the description seems not to fit
and execute KEU2 again.
I hope this helps.
Regards,
MLM -
Comm. error while checking accnt assignment for invoice 8000338378 in syste
Hi all,
Comm. error while checking accnt assignment for invoice (8000338378) in system .
But every thing is good.but we are geting error list above error
Reagrds,
SrikanthHi Praveen and all,
Thanks for your replies.
I tried doing setting with VKOA and checked with
VF02, Environment-Account determination analysis.
--> it says account determination is found.
Then i clicked the Flag button(Release to accounting) in VF02.
It gives below error in status bar
<b>"only output tax is allowed for account 175000 JTC1, E0 is not allowed"</b>
How to go ahead or solve this error.
suggest me please.
regards
Ambichan -
Error while checking in and storing
Dear All
I am trying to attaching a file using CV01n, when i am doing for check in - i am getting following error message
Error while checking in and storing
Message no. 26253
What may be the issues, even my my repositories working fine ( configured contentserver, status is active)
Regards
chandraDear Chandra,
please check in transaction OACT if the storage category is assigned to the correct content repository. Further please read also through notes 707568 and 833576.
Best regards,
Christoph -
Error while checking in a document: Unable to execute service
Hi,
I am using oracle UCM 11g. When i am checking in a document, i am getting error as "Unable to execute service CHECKIN_NEW_SUB and function validateCheckinData."
In stacktrace found this is caused by:
"Unable to find query or idc data source with 'DdeletedRows'. "
How to resolve this?
Thanks in advancePlease refer to this thread ...may be u get ur answer out of it...........................
Error while checking in and storing: C:\ ..... (Message no. 26253)
regards,
Tushar Dave -
Error While Checking In & Storing
Hi Guru's
There are some documents which are stored in our legacy system.We are trying to transfer documents from legacy to ECC6.0 through java connector.
In java program we have done the coding by calling the function module BAPI_DOCUMENT_CREATE2.When we run the java program we are getting the error as Error while checking in and storing although we have defined the storage category
While if we run the same java program by defining the storage category as SAP-System, documents are getting uploaded in 4.6 system and we are unable to find out the Storage category SAP-SYSTEM in 4.6 system
Kindly let me know how to resolve this issue or is there any way to transfer documents from legacy to ECC 6.0
Regards
BhanuHi Bhanu
Is it error No 26253 correct me if I am wrong.
If this is the error the check with basis administrator. Log space must be full or content server must be down due to some reasons.
With Warm reagards
Mangesh Pande -
Error while checking in and storing: C:\Documents and setting*
hI,
I hace install the content server and i made content repository also.
everything I made on development server, and the original application file is getting check in also.
now when I tried to check in it in test sever, it giving me error like Error while checking in and storing: C:\Documents and setting
I transported all request like content repository and all to test server from development server.
regards,
nitinHi, Nithin,
Check this also in development
In your local machine Goto
C:\windows\system32\drivers\etc
There will be file called "hosts"
in that file plz specify the IP of the content server.
Eg;
<IP address> <Content server name>
102.210.23.186 My Content server
Save the file.
Restart the machine and then try check-in the file in content server.
Regards,
Ben -
Error while checking in and storing document in storage category
Dear Consultants,
When i am trying to save a document in storage category thru tcode cv02n, its giving me error:-
Error while checking in and storing document "c:/desktop/content.doc",
while there is no error in csadmin and OAC0 tcode repository is in running status
even output of
dbmcli db_enum
OK
SDB /sapdb/SDB/db 7.6.03.09 fast running
SDB /sapdb/SDB/db 7.6.03.09 quick offline
SDB /sapdb/SDB/db 7.6.03.09 slow offline
SDB /sapdb/SDB/db 7.6.03.09 test offline
URL "http://192.168.2.11:1090/ContentServer/ContentServer.dll?serverInfo"
output :-
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="7";serverBuild="23";pVersion="0046";serverStatus="running";serverDate="2011-12-14";serverTime="10:01:44";startUpDate="2011-12-14";startUpTime="06:36:18";lastAccessDate="2011-12-14";lastAccessTime="09:57:59";
contRep="ZCONT_TEST";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="localhost";security="1";contRepDescription="test content repositry";driver="MaxDB";defaultDocProt="";
contRep="ZDMS_C1";contRepStatus="data(0%) log(191655552%)";pVersion="0046";storageVersion="17";storage="SAPDB";buildLevel="1";contentStorageName="SDB";contentStorageHost="hpsebdev1";security="1";contRepDescription="Database storage documents";driver="MaxDB";
Please Help regading the issue
Regards
Gagan Sharma
Basis ConsultantHi,
Please revisit your DMS configuration. May be something is missing out in the configuration.
Additionally you can retry to chekin by changing the following parameter
security = 0.
Hope this is useful.
Regards,
Deepak Kori -
Dear All,
I am working in an environment :
SAP ECC 6.0
Content server Version 6.4
I configured Content Repository, Content Category & Document Area in KPro.
I tried to test connection in OAC0, I am getting the message "Connection test for content repository XXXXXXXXXXXX was successful".
But when I tried to check in the docs in CV01N and while saving the DIR I am getting the error "Error while checking in and storing: C:\ ..... (Message no. 26253)".
Same time I can able to check in the docs to SAP DB.
Plz share your views to sort out my Issue.
Thanks & Rgds,
Sukan
[email protected]Hello David,
I assume you’re using windows contentserver.
sounds like a problem with the parameter maxAllowedContentLength of ISS.
Default value would be 30 MB
Check the limit:
C:\windows\system32\inetsrv\appcmd list CONFIG -section:requestFiltering
Set limit to 4 GB:
c:\windows\system32\inetsrv\appcmd set config -section:requestFiltering -requestLimits.maxAllowedContentLength:4294967295
resatart ISS and try again.
Best Regards
Andreas
Maybe you are looking for
-
Library is not going onto my iPod
I burned a CD into my library and clicked update iPod to get the songs. The songs were not showing up on my iPod, so I tried a second time with another CD. Still wasn't working. I decided that actually installing the newest update might help so I did
-
10.9.2 Audio problems (and "reportcrash" stuck)
Since updating ive been having problems. My MBox2 has been rendered useless. The audio from both daw and sytem is distrorted and garbled when it does work. I reinstalled the latest drivers, I repaired permissions and disk and even reinstalled the sys
-
A box showed up that said "this architecture does not support Firefox 4." Firefox was no longer available on my laptop. Leopard is my OS. (Highest it will go)
-
File or picture upload in survey tool
Hi, we want to use survey tool for gathering some information from customer location. Here there is a need to to provide a facility to user to load a file or picture.First of all can i do this using survey tool if so can anybody pls provide the way o
-
Restrict GRN before Pre-payemnt
Please help me with following requirement. I want to raise a Purchase Order for a certain material to a single vendor with a pre-payment of 40% (out of total PO value). How do I make sure that until invoice for the Pre-payment is raised in SAP, that