[SOLVED] Error with Wickr deb package

Hi people, I was trying to running wickr on Arch Linux. (I am under Gnome), I used debtap utility, attempted to convert wickr deb package to work with pacman but failed with this dependency:
warning: cannot resolve "libavutil52|libavutil54", a dependency of "wickr"
:: The following package cannot be upgraded due to unresolvable dependencies:
error: failed to prepare transaction (could not satisfy dependencies)
:: wickr: requires libavutil52|libavutil54
I am pretty sure I have already got the libavutil-52 installed and does not help. I even managed to convert libavutil54 from debian and installed but still no progress.
Any help? thx in advance.
Last edited by sakuya16 (2015-05-06 11:06:50)

Hi sakuya16,
the | character does not work as logical or inside the PKGBUILD, depends is an array of strings separated by withe spaces. Also you must specify only one version of libavutil and its name is libavutil-52 and not libavutil52. For more information read the wiki https://wiki.archlinux.org/index.php/PKGBUILD#depends
--edit:
Yeah, tomk is right, try to see if it works with the current libavutil.so.54 first.
Last edited by mauritiusdadd (2015-05-06 10:42:02)

Similar Messages

[SOLVED] Error with PKGBUILD for package hash-identifier

Hi,
I tried to install the package hash-identifier.
While running makepkg -s, there is an error:
==> ERROR: PKGBUILD contains CRLF characters and cannot be sourced.
I guess this is due to the New Line character at line 17 of the PKGBUILD:
sed -e 's|
||g' -i Hash_ID_v${pkgver}.py
So I remove it, but then I get this other error and I don't know what to do with it:
==> Extracting sources...
==> Starting prepare()...
sed: -e expression #1, char 0: no previous regular expression
==> ERROR: A failure occurred in prepare().
Aborting...
Last edited by PâtéDeCerf (2015-03-11 08:18:34)

Thanks for your reply. I'm not familiar with package build syntax nor python, so I don't understand everything you wrote.
It would be good if you could explain more clearly though.
By applying the change you propose, I was able to build the package and install it.
NB: To run the program, type from the command-line :
$ hash-id
...and not simply "hash-identifier"
Last edited by PâtéDeCerf (2015-03-11 08:21:10)

Cant download itunes, because ' there is an error with windows installer package' please help?

cant download itunes, because ' there is an error with windows installer package' please help?

I am getting the same message when I try to install the latest version of iTunes, I am running on Windows Vista Home Premium. I have tried so many different things to try to correct this and have now completly unistalled it from my laptop..... Now I have no iTunes what-so-ever on it and still can't install it. I found an older versin of iTunes and it installed without any problems, but I can't access it because my library was created on a newer version! Talk about frustrated..... WE NEED HELP!!!!!

[SOLVED] Error with the php5 module for apache

Hi!
I've installed Apache 2.0.55-1 and PHP5 5.1.4-4. When I try to run the apache server it fails. Then I do httpd -k start and I get:
Syntax error on line 262 of /etc/httpd/conf/httpd.conf:
API module structure `php5_module' in file /usr/lib/apache/libphp5.so is garbled - perhaps this is not an Apache module DSO?
The file libphp5 exists, but seems corrupted.
See you
NeOnsKuLL

That version of the package has been built with apache 2.2.x. Be sure to use that version of apache too, as 2.0 won't work with that specific package.

[Solved]Error with installing package: /usr/lib64 exists in filesystem

So i know there are other posts about this and i have read them and I have also read the wiki https://wiki.archlinux.org/index.php/De … _in_.2Flib and also this forum post https://bbs.archlinux.org/viewtopic.php?id=156942
the error i get when trying to install a package from the AUR
error: failed to commit transaction (conflicting files)
hp-health: /usr/lib64 exists in filesystem
Errors occurred, no packages were upgraded.
I tried to find who owned the files/package in the /lib by the following commands
$ grep '^lib/' /var/lib/pacman/local/*/files
$ find /lib -exec pacman -Qo -- {} +
the output was
/lib is owned by filesystem 2015.02-1
Im confused what to do at this point as the wiki that I linked above says
If any package apart from glibc is listed as owning a file, that package needs to be updated to install its files in /usr/lib
Last edited by PigsInSpace (2015-03-01 02:25:24)

You are following directions for a file conflict with /lib for a very specific one-time manual intervention, but you don't have that file conflict according to the error message you posted and it is not for that intervention. See this instead: https://wiki.archlinux.org/index.php/Pa … 9.22_error then report the error on the aur page for that package.
This fixes it:
package() {
cd "$srcdir"
+ mv usr/lib64 usr/lib
cp -a opt usr var "$pkgdir"

Error with standard Copy package

Hello!!
When I run the standard copy package selecting the option "Replace & clear data values" the execution finishes with status error and I receive the next error message in the log:
Item has already been added. Key in dictionary: '[Invalid time Member] - EN_NONE|DSP_INPUT|2004_UPA_SEPT|' Key being added: '[Invalid time Member] - EN_NONE|DSP_INPUT|2004_UPA_SEPT|'
If I run the package with the option "Merge" it executes OK.
Anybody help?
Thank you in advance
Pedro
Edited by: Pedro de las Heras on Aug 7, 2009 3:16 PM

Hello,
You probalby get this error message beacuse you have not setup the Work Status for this application. Please defined the Work Status you want to use on the appset level and then define the dimensions you want to use to control the work status on the application level. That should solve your issue.
Regards,
Marcel

[Solved] Error upon selecting "base" package during install process

Hey guys,
I got stuck in the install process. the following issue never occured to be before.
Upon selecting the base package during install and pressing "OK", i recieve the following error:
ERROR: check_is_in needs a non-empty needle as $1 and a haystack as $2!(gote: check_is_in '' 'base')
and that throws me out of the installation process.
A google search on the error message only returned sites where the responsible script is postet.
I am installing arch linux on a lenovo x220, on a seperate ext4 partition.
Any help is appreciated, thanks!
Last edited by replax (2012-11-06 20:30:55)

ArielVoynes wrote:The problem is with mirrors.kernel.org (now that I remember, I've read about kernel.org having trouble with their servers, is this still true?). Just choosing another mirror solves the problem.
I just read through this post and it did fix my issue. However, I do not remember what mirror I selected.
It was a few selections below kernel.org......
Last edited by BradJ (2011-09-20 04:27:17)

[SOLVED]Error with xf86-video-ati 6.12.99.git20091221-1 + mesa-7.6.1-1

Upgrade mesa (7.6-2 -> 7.6.1-1), libgl (7.6-2 -> 7.6.1-1), libgl (7.6-2 -> 7.6.1-1) and ati-dri (7.6-2 -> 7.6.1-1) from testing broke my resolution in KDE - X start only with vesa driver.
I don't use xorg.conf, kernel is kernel26 2.6.32.2-1 from testing, KMS disabled (don't work with this kernel)
/var/log/Xorg.0.log:
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
dlopen: libdrm_radeon.so.1: cannot open shared object file: No such file or directory
(EE) Failed to load /usr/lib/xorg/modules/drivers/radeon_drv.so
(II) UnloadModule: "radeon"
(EE) Failed to load module "radeon" (loader failed, 7)
(II) LoadModule: "vesa"
Compiling xf86-video-ati-git (20091223-1) solve this problem
Last edited by Tapan (2009-12-23 14:19:23)

I have kernel 2.6.31-ARCH, nothing testing repository but in my
grep EE /var/log/Xorg.0.log
Current Operating System: Linux skynet 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(II) Loading extension MIT-SCREEN-SAVER
(EE) Failed to load module "fbdev" (module does not exist, 0)
(EE) RADEON(0): [dri] RADEONDRIGetVersion failed because of a version mismatch.
(EE) Microsoft Comfort Curve Keyboard 2000: failed to initialize for relative axes.
and, for example, switch for different desktop is very slow. Also maximized windows is very slow (I'm using xfce with compositing)

[SOLVED] errors with fdisk and cryptsetup; is my drive going bad?

I'm having issues with re-formatting an external hard drive using dm-crypt. It was previously formatted with TrueCrypt/NTFS, which I used as a shared backup drive between Windows and Arch. At some point, it stopped being able to mount, which I attributed to allowing Windows to "fix" it after improper dismount (e.g. a hard kill).
I decided to re-format with ext4 and only use it from Arch, but now I'm wondering if I may have a hardware issue with the drive. I've tried a lot more (like going through the full zero write after mounting the drive as a temporary dm-crypt device), but here's the condensed version to illustrate the problem.
system info
This is on a fresh boot. Just adding that as I've had issues with kernel modules after updating if a new kernel comes through. A fresh boot removes that potential issue.
$ uname -a
Linux arch_840 4.0.3-1-ARCH #1 SMP PREEMPT Wed May 13 15:38:47 CEST 2015 x86_64 GNU/Linux
$ lsmod | grep dm_
dm_crypt 28672 2
dm_mod 98304 5 dm_crypt
$ lsmod |grep xts
xts 16384 2 serpent_sse2_x86_64,twofish_x86_64_3way
gf128mul 16384 2 lrw,xts
smartctl status
Figured I should check the drive. There's a lot of old age and pre-fail warnings, but this post would seem to suggest I'm okay?
# smartctl -A /dev/sdb
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-4.0.3-1-ARCH] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 090 089 025 Pre-fail Always - 3330
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 703
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 3707
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 104
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 734
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 17
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 053 000 Old_age Always - 24 (Min/Max 16/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 3
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 104
225 Load_Cycle_Count 0x0032 079 079 000 Old_age Always - 214068
Disk info, delete existing partition, new MBR, create new partition
# fdisk /dev/sdb
Welcome to fdisk (util-linux 2.26.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
Command (m for help): p
Disk /dev/sdb: 465.8 GiB, 500107862016 bytes, 976773168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x76d37b6d
Device Boot Start End Sectors Size Id Type
/dev/sdb1 63 976768064 976768002 465.8G 83 Linux
Command (m for help): d
Selected partition 1
Partition 1 has been deleted.
Command (m for help): o
Created a new DOS disklabel with disk identifier 0x2cd60f13.
Command (m for help): n
Partition type
p primary (0 primary, 0 extended, 4 free)
e extended (container for logical partitions)
Select (default p): p
Partition number (1-4, default 1):
First sector (2048-976773167, default 2048):
Last sector, +sectors or +size{K,M,G,T,P} (2048-976773167, default 976773167):
Created a new partition 1 of type 'Linux' and of size 465.8 GiB.
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Syncing disks.
trying to format with cryptsetup
I had a bunch of custom options, but other Arch posts suggested just trying the default, which is what I've done here. It fails with the same error as when I try to pass a cipher, key size, etc. ("Command failed with code 5: IO error while encrypting keyslot.").
# truecrypt -v --debug luksFormat /dev/sdb1
bash: truecrypt: command not found
[root@arch_840 jwhendy]# cryptsetup -v --debug luksFormat /dev/sdb1
# cryptsetup 1.6.6 processing "cryptsetup -v --debug luksFormat /dev/sdb1"
# Running command luksFormat.
# Locking memory.
# Installing SIGINT/SIGTERM handler.
# Unblocking interruption on signal.
WARNING!
========
This will overwrite data on /dev/sdb1 irrevocably.
Are you sure? (Type uppercase yes): YES
# Allocating crypt device /dev/sdb1 context.
# Trying to open and read device /dev/sdb1.
# Initialising device-mapper backend library.
# Timeout set to 0 miliseconds.
# Iteration time set to 1000 miliseconds.
# Interactive passphrase entry requested.
Enter passphrase:
Verify passphrase:
# Formatting device /dev/sdb1 as type LUKS1.
# Crypto backend (gcrypt 1.6.3) initialized.
# Detected kernel Linux 4.0.3-1-ARCH x86_64.
# Topology: IO (512/0), offset = 0; Required alignment is 1048576 bytes.
# Checking if cipher aes-xts-plain64 is usable.
# Using userspace crypto wrapper to access keyslot area.
# Generating LUKS header version 1 using hash sha1, aes, xts-plain64, MK 32 bytes
# KDF pbkdf2, hash sha1: 996745 iterations per second.
# Data offset 4096, UUID 181fed4d-42f2-4f0f-8b70-cb7ba459e25f, digest iterations 121625
# Updating LUKS header of size 1024 on device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Reading LUKS header of size 1024 from device /dev/sdb1
# Key length 32, device size 976771120 sectors, header size 2050 sectors.
# Adding new keyslot -1 using volume key.
# Calculating data for key slot 0
# KDF pbkdf2, hash sha1: 1008246 iterations per second.
# Key slot 0 use 492307 password iterations.
# Using hash sha1 for AF in key slot 0, 4000 stripes
# Updating key slot 0 [0x1000] area.
# Using userspace crypto wrapper to access keyslot area.
IO error while encrypting keyslot.
# Releasing crypt device /dev/sdb1 context.
# Releasing device-mapper backend.
# Unlocking memory.
Command failed with code 5: IO error while encrypting keyslot.
Things also tend to hang with respect to the drive at this point. For example, fdisk -l spits out /dev/sda partitions immediately and then just hangs instead of printing out /dev/sdb info, then eventually quits (without ever writing it).
Any suggestions on where to look/how to troubleshoot? I found some possibly related posts, but nothing that looks promising:
- Impossible to crypt the drive using cryptsetup (fixed by rebooting)
- cryptsetup fails to open Udev cookie 0xd4d94f5 (semid 0) waiting for z (no responses; the hang after seems similar)
There's a couple odds and ends references to cryptsetup 1.6.6 having issues. I downloaded 1.6.4-1 and 1.6.5-1 and -2 from ARM to try, but wanted to post this in the meantime in case something stuck out.
Last edited by jwhendy (2015-05-29 16:01:40)

@qinohe I thought of that and the other day started formatting with mkfs.ext4; unfortunately, it was at work and I had to leave before I could let it finish. It had been chugging along a good few hours, and I was surprised it would take that long. I was able to format it with ext4 using Windows 7 (I dual boot) with the MiniTool Partition Wizard but I didn't use it like that before trying to solve the cryptsetup issue again.
This last time around, I was getting unresponsive behavior. I think I need to reboot each time I try something with cryptsetup, as any commands related to that drive seem to hang afterwards (fdisk, umount, eject, mkfs, or trying crypsetup again). Perhaps I'll just let it cook overnight with mkfs and see if I can at least have an unencrypted, but functional drive.
One interesting tidbit is that even though cryptsetup fails, when I've tried to issue mkfs afterward, it asks me to confirm that I want to format the disk since it has a LUKS header... so something appears to have been written. Is it possible the header is causing some issues? I don't know much about the structure of a disk (like what range the MBR resides in, what constitutes a header, etc.) but have been wondering if there's some way to start really, really clean with the disk. Like I'd just bought it -- something appears to be lingering around from previous efforts?
@frostschutz I'll check tomorrow. That's a good question. Just checked journalctl and here are some of the errors that appear; unfortunately, I wasn't watching so I can't tell you what matches up with what command:
May 23 09:32:22 arch_840 systemd-udevd[7784]: inotify_add_watch(7, /dev/sdb1, 10) failed: No such file or directory
May 23 09:32:22 arch_840 kernel: usb 3-4: stat urb: status -108
### there's lots like this; like 10 in a row with various sector values listed
May 23 09:32:19 arch_840 kernel: Buffer I/O error on dev sdb1, logical block 61341696, lost async page write
May 23 09:32:19 arch_840 kernel: blk_update_request: I/O error, dev sdb, sector 490735616
### there's also a bunch like this, from tab #0 -> #29 (not colored red, so not sure they're errors?)
May 23 09:32:19 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 CDB: opcode=0x2a 2a 00 1d 07 bc 10 00 04 00 00
May 23 09:32:18 arch_840 kernel: sd 2:0:0:0: [sdb] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
I paged down quite a ways and those seem like the unique messages when I search the journal for "sdb". Anything stand out? I will say that the same sector numbers appeared in multiple blocks of the third error type listed, so that makes me wonder if something is genuinely wrong with the disk. I'll post the output of the full smartctl scan when I hopefully run it tomorrow.
Thanks for chiming in!

[Partially Solved] Error with bsdtar and symbolic links

I'm trying to install a package (asymptote) from AUR but am running into an odd error. During the extract phase I get errors like
asymptote-1.70/base/asy-keywords.el: Can't update time for asymptote-1.70/base/asy-keywords.el: Function not implemented
bsdtar: Error exit delayed from previous errors.
I found a post that may help: http://bbs.archlinux.org/viewtopic.php?id=50750. Do I really have to do this?
By the way, I too am running on a Linode (Xen virtualization).
Thanks,
Luis
Last edited by banbh (2009-05-24 00:22:13)

I have not got to the bottom of my problems with bsdtar and symlinks. I suspect it must have something to do with either my configuration (derived from the Arch image provided by Linode) or running under virtualisation.
However, others might find my work-around useful, so I document it below.
I downloaded asymptote from AUR using wget ("wget http://aur.archlinux.org/packages/asymptote/asymptote.tar.gz"), unpacked it, then patched the PKGBUILD
$ diff -u PKGBUILD.orig PKGBUILD
--- PKGBUILD.orig 2009-05-23 17:58:47.000000000 -0400
+++ PKGBUILD 2009-05-23 18:00:49.000000000 -0400
@@ -11,9 +11,12 @@
'used if present at compile time: freeglut, gsl, fftw')
source=(http://downloads.sourceforge.net/sourceforge/asymptote/$pkgname-$pkgver.src.tgz)
md5sums=('1ded335bc63b662a6eb920a4c065706c')
+noextract=($pkgname-$pkgver.src.tgz)
build() {
- cd $srcdir/$pkgname-$pkgver
+ cd $srcdir
+ tar xzf $pkgname-$pkgver.src.tgz
+ cd $pkgname-$pkgver
./configure --enable-gc=/usr --prefix=/usr \
--with-latex=/usr/share/texmf/tex/latex || return 1
make asy || return 1
After that I simply did a "makepkg" followed by "sudo pacman -U asymptote-1.73-1-i686.pkg.tar.gz"

[Solved] errors with keys after pacman update?

Hi,
I installed pacman 4.0.1-4, but now this is what happens when I try and update.
Proceed with installation? [Y/n] Y
(28/28) checking package integrity [######################] 100%
error: binutils-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: libcap-ng: signature from "Ionut Biru <[email protected]>" is unknown trust
error: cifs-utils: signature from "Tobias Powalowski <[email protected]>" is unknown trust
error: cmake: signature from "Dave Reisner <[email protected]>" is unknown trust
error: colord: signature from "Ionut Biru <[email protected]>" is unknown trust
error: lib32-glibc: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: lib32-gcc-libs: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: gcc-libs-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: gcc-multilib: signature from "Jan Alexander Steffens (heftig) <[email protected]>" is unknown trust
error: perl: key "6D1655C14CE1C13E" is unknown
error: key "6D1655C14CE1C13E" could not be looked up remotely
error: openssl: signature from "Pierre Schmitz <[email protected]>" is unknown trust
error: git: signature from "Dan McGee <[email protected]>" is unknown trust
error: gpgme: signature from "Dave Reisner <[email protected]>" is unknown trust
error: gvfs: signature from "Dave Reisner <[email protected]>" is unknown trust
error: inetutils: key "FCF2CB179205AC90" is unknown
:: Import PGP key 9205AC90, "Eric Belanger <[email protected]>", created 2011-04-19? [Y/n] Y
error: key "Eric Belanger <[email protected]>" could not be imported
error: intltool: key "FCF2CB179205AC90" is unknown
:: Import PGP key 9205AC90, "Eric Belanger <[email protected]>", created 2011-04-19? [Y/n] ^C
Interrupt signal received
When pacman updated it suggested that I run this command,
sudo pacman-key --init
I know that usually I would say yes to a key and pacman should remember it, but what are all the errors?
Last edited by mich04 (2012-01-20 17:19:26)

# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#CheckSpace
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
Here it is.

CDS-11025 Error: Oracle Designer generation error with PL/SQL package

Hi friends,
We tried to generate a database package from Oracle Designer (10.1.2.6) and getting "syntax errors" but the package has no syntax errors when we copy and paste the code and compile in TOAD (10.6)
Error from Designer:
Server Generator 10.1.2.6 (Build 10.1.2.11.12) , Wed Oct 17 10:58:43 2012
Copyright (c) Oracle Corporation 1995, 2010. All rights reserved.
CDS-11025 Error: The PL/SQL within PACKAGE BODY AVP_WATER_ANALYSIS_V has syntax errors - At token 'END', around:
...te_dist.VLV_INTL_ID;
END LOOP;
Processing Complete: 1 error(s), 0 warning(s)
code snippet from the Error message:
FOR rec_update_dist IN cur_update_dist (i_anlyd_intl_id,
i_iterd_intl_id,
i_phsed_intl_id,
i_wtrc_intl_id)
LOOP
UPDATE AVP_VALVE AvpValve
SET AvpValve.DIST_FROM_EDGE = rec_update_dist.DIST_FROM_EDGE
WHERE AvpValve.ANLYD_INTL_ID = rec_update_dist.ANLYD_INTL_ID
AND AvpValve.ITERD_INTL_ID = rec_update_dist.ITERD_INTL_ID
AND AvpValve.PHSED_INTL_ID = rec_update_dist.PHSED_INTL_ID
AND AvpValve.WTRC_INTL_ID = rec_update_dist.WTRC_INTL_ID
AND AvpValve.VLV_INTL_ID = rec_update_dist.VLV_INTL_ID;
END LOOP;
Thanks for any feedback,
Jim

Found the problem.
It was an issue with the CURSOR with the SELECT ... FROM (SELECT CASE WHEN THEN ELSE END). After swithing to the DECODE statement, Designer is able to generate the package.
CASE
WHEN ISOLATION_IND = 'Y' THEN
'A'
WHEN OPERATED_IND = 'Y' THEN
'B'
ELSE
'C'
END
decode(ISOLATION_IND,'Y','A',decode(OPERATED_IND,'Y','B','C'))
However, still strange to me that Designer doesn't like the CASE as part of SELECT.
Edited by: user476620 on Oct 18, 2012 8:13 PM

Error with PL/SQL package

Hi ,
I have written a package specification given below :
create or replace PACKAGE BILL_PACKAGE AS
storeId varchar2(5);
startDate varchar2(10);
FUNCTION F_Bill(str_id IN tel_tr_ltm_bl_py.id_str_rt%TYPE,ws_id IN tel_tr_ltm_bl_py.id_ws%TYPE,v_date IN tel_tr_ltm_bl_py.dc_dy_bsn%TYPE) RETURN boolean;
END BILLPAYPACKAGE;
I have written the package body also .Now when i am calling the function F_Bill , I am gettin this error :
PLS-00201: identifier 'BILL_PACKAGE.STARTDATE' must be declared
ORA-06550: line 2, column 1:
PL/SQL: Statement ignored
ORA-06550: line 3, column 1:
PLS-00201: identifier 'BILL_PACKAGE.STOREID' must be declared
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored
This same package is running fine on another local database.
What could be the reason for this?
Is this an acess issue ?In db which we are getting an error , we are using a user 'ConUser' to connect to a schema 'b_owner'.
How can we check this if this is a privilege issue.
Thanks!

>
This same package is running fine on another local database.
What could be the reason for this?
Is this an acess issue ?In db which we are getting an error , we are using a user 'ConUser' to connect to a schema 'b_owner'.
How can we check this if this is a privilege issue.The user "ConUSer" needs execute privileges for the pacakge.
Also it depends how he calls the package or the variables in it.
You can check the privs with
select * from all_tab_privs where table_name = 'BILL_PACKAGE';this must be run as user ConUser.
You could also have a problem with name resolution. The name of the package is not BILL_PACKAGE. It is "b_owner.BILL_PACKAGE".
If you omit the schema name then the current user is tried. So if you call BILL_PACKAGE then this is translated into "ConUSer.BILL_PACKAGE".
You can change this by creating a synonym like
create synonym bill_package for b_owner.bill_package;

[SOLVED] Error with usb external HD

Since 1.5.x kernel serie I get the following message on attaching a external usb hb:
ago 14 10:21:42 udisksd[429]: Error performing initial housekeeping for drive /org/freedesktop/UDisks2/drives/ST1000LM024_HN_M101MBB_S2ZPJ9BD491796: Error updating SMART data: sk_disk_check_sleep_mode: Operation not supported (udisks-error-quark, 0)
ago 14 10:21:42 nono kernel: xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020fc5bc48
ago 14 10:21:42 nono kernel: xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020fc5bcd8
ago 14 10:21:42 nono kernel: xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020fc5bc00
ago 14 10:21:42 nono kernel: xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff88020fc5bc90
ago 14 10:21:42 nono kernel: scsi host6: uas_eh_bus_reset_handler success
ago 14 10:21:42 nono systemd-udevd[150]: worker [500] terminated by signal 9 (Killed)
I've been solving this issue installing an old local 1.4.x kernel file.
Today I have installed a new 1.6.x. kernel and this problem still persists.
Thanks in advance for your help.
Last edited by Miles28 (2014-08-14 14:24:18)

Try disabling the UAS driver, check here [1] how to disable it for a particular drive.
[1] https://bbs.archlinux.org/viewtopic.php?id=183190

[SOLVED] Error with taskset

I'm trying to assign a process to one core of my machine using taskset. But it gives me this error:
$ sudo taskset 0x00000001 -p 20145
Password:
execvp: No such file or directory
failed to execute -p
What do I have to do to make it work?
Thanks
Last edited by snack (2010-03-31 15:14:47)

snack wrote:
I have GCC, but can't find assembler in repo. Maybe the package name is different? Here's what I get:
$ sudo pacman -Ss assembler
core/bin86 0.16.17-4 (base-devel)
A complete 8086 assembler and loader
extra/hping 3.0.0-1
hping is a command-line oriented TCP/IP packet assembler/analyzer.
extra/nasm 2.07-1
80x86 assembler designed for portability and modularity
Did you try only installing gcc? I don't think Assembler brings something to the solution.

[SOLVED] Error with Wickr deb package

Similar Messages

Maybe you are looking for