[SOLVED] eth0 not found after a reboot, among other things

I am having a bit of a crisis here. Updated my packages today and rebooted to find that eth0 was labeled as 'no such device', Xorg freezes on startup, and my bluetooth mysteriously stopped working. I have no idea where to even begin looking for a correlation between these problems.
Last edited by sealclubber (2012-09-16 19:17:12)

falconindy wrote:
sealclubber wrote:I am having a bit of a crisis here. Updated my packages today and rebooted to find that eth0 was labeled as 'no such device', Xorg freezes on startup, and my bluetooth mysteriously stopped working. I have no idea where to even begin looking for a correlation between these problems.
I'm guessing you don't have /lib as a symlink to usr/lib and you picked up kmod-10.
Bingo.
Thank you sir.

Similar Messages

  • [SOLVED]: gnutls not found after LXDE install attempt

    After issuing the following command as root:
    # pacman -S lxde
    many console messages ensue, among them:
    error: failed retrieving file 'gnutls-2.8.6-1-i686.pkg.tar.xz' from mirror.rit.edu : Not Found
    This message is repeated for each of the other five mirrors in my list.
    All the other packages seem to have been retrieved all right.
    At the end of the process, the following messages appear:
    warning: failed to retrieve some files from extra
    error: failed to commit transaction (Not Found)
    Errors occurred, no packages were upgraded.
    I tried
    # pacman -S gnutls
    and got the same results as above, with the same version number in the error message, and the same three messages at the end.
    I searched for gnutls in the package database, and found gnutls to be at version 2.10.4-1 .
    I have searched the Arch wiki, forums, and beginner's guide for this issue, with no success, and have tried Googling the Web with various combinations of the words arch, lxde, gnutls, and "not found", also with no success.
    This is my first attempt at installing Arch, but not my first experience with Linux.  All has gone well up until now; the Arch CLI environment has been functioning well.
    [eof]
    Last edited by champted (2010-12-20 22:18:55)

    Thankx for your fast reply.
    Name : pacman
    Version : 3.4.1-1
    URL : http://www.archlinux.org/pacman/
    Licenses : GPL
    Groups : base
    Provides : None
    Depends On : bash libarchive>=2.7.1 libfetch>=2.25 pacman-mirrorlist
    Optional Deps : fakeroot: for makepkg usage as normal user
    curl: for rankmirrors usage
    Required By : None
    Conflicts With : None
    Replaces : None
    Installed Size : 2244.00 K
    Packager : Dan McGee <[email protected]>
    Architecture : i686
    Build Date : Fri 03 Sep 2010 09:12:12 PM EDT
    Install Date : Thu 16 Dec 2010 01:34:01 PM EST
    Install Reason : Explicitly installed
    Install Script : Yes
    Description : A library-based package manager with dependency support

  • CS6 photoshop not found after downloading and putting in serial number

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only??
    Thanks!

    Nowhere during the installation does it give me the option to select the previous version I purchased! This is a new install on a new computer because my other computer no longer works. There is no option for me to select CS6 PS (NON EXTENDED) on the download from Adobe! When I install it only installs the extended version and tells me my serial number is valid but not for the extended. When you provided the link to the page that has the downloads, all that loads is the extended version. Can you please give me a link to the CS6 (not extended) so I can get back to work? I also was able to get the hard drive out of my computer that no longer works and put it on my new computer I'm trying to install CS6 on and the installer gave me NO OPTIONS to enter my old serial#.
    This is beyond frustrating!!!! I have a computer go out on me, and have to buy a new computer, then when I try to install CS6 PS it will not install. In the meantime I'm trying to keep my small business going to stay in business. I can't call any one from adobe. All I can do is send emails to get this resolved and wait.
    Please please help me!

  • Urgent 2nd request CS6 photoshop not found after downloading and putting in valid serial #

    CS6 photoshop not found after downloading and putting in valid serial number. Only extended version shows up as available. How do I just download CS6 photoshop only?? only the CS6 PS extended version shows up as downloaded.
    I have no idea how this forum works or weather or not this has been posted let alone answered. Can someone from Adobe please help me asap
    Thanks!

    check your duplicate post.  there are two responses.

  • "CJS-30199 The CTC classes were not found after waiting for 900 seconds."

    Here's the snippet of the sapinst_dev.log
    I am trying to install Central Instance on a RedHat Enterprise 4 server (32bit). But stuck at
    this stage.
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 FSPath(/usr/sap/LN1/DVEBMGS02/j2ee/cluster/server0/apps/sap.com/tclmctcutilbasic_ear/servlet_jsp/ctc/root/WEB-INF/classes/com/sap/ctc/util/ConfigMainExt.class).isExisting() done: false
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    2007-05-10 20:19:48.093 NWJavaInstance._waitForFile() - elapsed time = 910 timeout = 900
    TRACE      [iaxxejsexp.cpp:188]
               EJS_Installer::writeTraceToLogBook()
    NWException thrown: nw.usageTypes.ctcSyncWaitTimeout:
    The CTC classes were not found after waiting for 900 seconds.
    ERROR      2007-05-10 20:19:48
               CJSlibModule::writeError_impl()
    CJS-30199  The CTC classes were not found after waiting for 900 seconds.
    TRACE      [iaxxejsbas.hpp:460]
               EJS_Base::dispatchFunctionCall()
    JS Callback has thrown unknown exception. Rethrowing.
    ERROR      2007-05-10 20:19:48 [iaxxgenimp.cpp:736]
               showDialog()
    FCO-00011  The step configCAF with step key |NW_Doublestack_CI|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|15|0|NW_Usage_Types_Configuration_AS|ind|ind|ind|ind|0|0|NW_CONFIG_CAF|ind|ind|ind|ind|1|0|configCAF was executed with status ERROR .
    Your help is much appreciated.
    Thanks and Regards,
    Satish/

    Hello Satish
    Please do following checklist:
    1. Check that the J2EE engine is up and running (e.g. log in with Admin)
    2. Check that the following application is running:
         Visual Admin => Cluster => Server => Services => Deploy
         Select "Application" and look for "sap.com/tclmctcutilbasic_ear
    3. Try to continue installation
    It could be helpful to apply the patch for CTC as per note # 938261
    before restarting.
    and also try to add more memory allocation.
    If issue persists,
    - I'd like to know which installation DVD/CD number being using ?
    - The contents of the LABEL.ASC file.
    - The installation guide reference and title used for this install ?
    - SAPINST version ?
    - Oracle version/patch level ?
    - Operating system version/patch level ?
    See also:
    Note # 851251 - SAP NetWeaver 2004s Installation on UNIX
    Thanks
    Kenny

  • Error message of "404 - page not found" after downloading and installing Firefox 15

    Error message of "404 page not found" after downloading the latest version of Firefox.

    This sometimes is the result of firewall software protecting you from changed applications. Or it might be something else. Can you review this article and see whether it helps: [[Firefox can't load websites but other browsers can]].

  • Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Since upgrading to ios 8.0.2, airprint will give error (no printer found" After a reboot, it locates and prints, then next time same error code. Any ideas?

    Hi bdtcop,
    I understand that you are experiencing an issue with AirPrint. Here is an article for you with some troubleshooting steps that may be helpful for resolving this issue:
    About AirPrint
    http://support.apple.com/kb/ht4356
    If you're unable to print
    Check these things if you are unable to print, or if you see the message "No AirPrint Printers Found."
    Make sure your printer has paper, and enough ink or toner installed.
    Make sure your printer is connected to the same Wi-Fi network as your iOS device.
    Make sure your printer has power and is turned on. Try turning your printer off and then back on again to see if it resolves your issue.
    Check to see if your printer has any error lights or indicators displayed on the printer's control panel. Check the documentation that came with your printer to clear any errors displayed.
    Check with your printer's manufacturer to see if any firmware updates are available for your printer. Check your printer's documentation or contact the printer vendor for more information. A firmware update may be available, even if you just bought your printer.
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Since upgrading to iOS7 some text messages are not being sent, iMessage on my Ipad and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things

    Since upgrading to iOS7 some text messages are not being sent on my iPhone 5, iMessage on my Ipads and MacBook doesn't have my phone number registered and my reminder colour on my Iphone keeps changing ... among other things. Any suggestions to fix these faults?

    Make sure People Sending you via iMessage are sending their messages on your PHONE number not on your EMAIL addresses . My sister had the same problem, thats how i managed to solve it!

  • HT1926 I cannot get iTunes to load -- "Apple Application Support was not found".  I have tried multiple things to fix it and nothing works including re-installing.

    I cannot get iTunes to load -- "Apple Application Support was not found".  I have tried multiple things to fix it and nothing works including re-installing.

    Try b noir's post  Standalone Apple Application Support install to see if that can repair the problem or provide futher information, otherwise try reinstalling again as shown in Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Is a music bed muzak for a movie?  (among other things)

    Is a music bed muzak for a movie? (among other things) [not play upon the alias of our illustrious poster, Muzak]
    LM

    rohan,
    Thank you for the leads. I shall follow them.
    My inquiry into beds started when I heard your Chapel bit. It was so different from the Apple looped things I had found when doing the Google.
    Would this rule work: "Do what you want, but no melody"?
    The Chapel link is in the following paragraph, from your post:
    "i find sculpture very difficult to use. its a bit like logic with in logic - the possiblities are incredible. i don't use it for sound medelling though. it gives you an opportunity to create very organic and sophisticated beds.
    because you can automate it and its method of sound production allows for very sophisticated, detailed and emorphous sound, you can, with a lot of work, produce some remarkable effects and beds. blended in with other things it can really bring to life a cue.
    here is an example i particularly like, although it doesn't take sculpture as far as i have done since i wrote this, but they're not up on my site yet. it starts with an unsettling and eerie sound that was perfect for the cue...
    http://www.stevenson.homechoice.co.uk/demos/chapel.mp3 "
    LM

  • What is the best way to transfer apps, contacts, et cetera from one iPhone (3G) and computer (2006 MacBook) to a new iPhone (4S) and computer (early 2011 MacBook Pro)?  I have already moved music, among other things using Migration Assistant.

    What is the best way to transfer apps, contacts, et cetera from one iPhone (3G) and computer (2006 MacBook) to a new iPhone (4S) and computer (early 2011 MacBook Pro)?  I have already moved music, among other things using Migration Assistant but I cannot locate contacts or Apps.

    transfer just SOME of the applications
    it's all or none, i'm afraid.

  • I have Photoshop Elements 8 and upgraded to Windows 8.  I now can not get the CREATE menu, and other things.  How can I get them back?

    I have Photoshop Elements 8.  When I got a new computer running Windows 8 I no longer have access to the CREATE menu, among other things.  How can I load the program so that I have all of the stuff I had before.

    This is the Photoshop forum  Try asking in the Photoshop Elements forum:
    Photoshop Elements

  • Network card not found after new installation [SOLVED]

    I broke my filesystem on my Asus UL80V series laptop in trying to solve problems related to the latest glibc update, so decided to do a clean re-install. I had an installation disk at hand: 2009.08 with kernel 2.6.30.4-1 (which is supposed to have the module for my ath9k network device). However after a successful installation (including all the files from base-dev), my network device is not recognised:
    dhcpcd: eth0: interface not found or invalid
    although network connectivity (wired and wireless) worked perfectly before the installation attempt.
    This happened yesterday (17th) and I have been scouring the web since trying to find out what the cause of this problem is, without luck.
    I also burned a new installation CD with the latest stable version, but no luck there, either! Got a message at the beginning informing me that the install requires 64 Mb memory, although my laptop has 4 Gb.
    I should say, the device is there and working:
    lspci | grep Net
    gives
    02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    I also did
    modprobe ath9k
    just to make sure. No luck.
    Any help will be appreciated.
    thanks
    thea
    Last edited by thea (2012-07-23 23:59:16)

    Argh, ip may not be around in the 2009 image really ;-) .. Use "ifconfig" instead..
    But: I meanwhile cross-checked your ath9k: http://wireless.kernel.org/en/users/Dri … h9k_driver
    and it does not sound encouraging for the kernel you have there.
    The image is far too old anyway, if you ask me (would be a darn hazzle to get that uptodate I am sure). Pity you get that memory error with the 2011 one. Maybe check forums on that. Sounds very strange, I am not aware of any post I read.
    If you can burn another CD, you can try the recent ISOs as well: http://releng.archlinux.org/isos/
    Beware that the ones from July dont have the AIF setup anymore.

  • TC not found after reboot (and other problems)

    Hi there,
    After I have gone through the Airport utility to setup my new TimeCapsule (TC) as router (connected with a DSL-modem), Airport utility rebooted TC, but then an error occurred, saying TC could not be found after reboot. This is the last in a series of strange behaviours and occurred directly after I reset TC to factory settings.
    I also had tried adding TC to an existing network. This appeared to work (no error message, green LED). However, I could not select TC as TimeMachine's backup drive. TimeMachine did find TC, asked me for the password and verified the password, however immediately switched back to the status "not configured".
    Any ideas? Thanks in advance
    -mat

    Dear fellow sufferers,
    it is solved! I decided to wait with a return and meanwhile the solution in another thread. All problems went away after I turned all security off from my network (do do this, I had to temporarily connect my TC by wire). This may be related to the fact that I am using a slightly aged PowerBook (latest Titanium model). Using fixed channel instead of automatic further accelerated the connection.
    Well, it is not really solved since I want to use some security in my network, but I suppose that will come with the next Leopard update (Cupertino, do you hear me!!!????).
    ...Cupertino, do you hear me!!???

  • /sbin/init not found after Solaris10-x86 first reboot

    Hello all,
    I just installed Solaris 10 on a x86. Nothing seemed to go awry, AFAIK.
    After the very first reboot it fails to boot with this:
    WARNING: exec(/sbin/init) file not found
    (Could not start init)
    Press any key to reboot.
    So I'm stuck, it seems.
    It does not seem that the / slice is missing as I guess I'd have a totally different error message, something like "could not mount root fs", I dunno.
    I'm sure that if I could boot the install DVD in single mode I'd be able to go and really check if /sbin/init really exists.
    Except that... I'm used to Sparc with its OPB, dunno how to get x86's equivalent to OpenBoot.
    Anyway, anyone came across the same "missing file" problem after initial install, and if so, how did you get out of it ?
    Bonus question, is there an equivalent to OpenBoot on x86 and how to reach it ?
    Before you ask.. this PC ran on Solaris 9/x86 a looooong time ago, no hardware changes, so no need to send me to the HCL :)
    Thanks,
    Jeff

    WARNING: exec(/sbin/init) file not foundSorry, can't help you with this since I never encountered such an error.
    Except that... I'm used to Sparc with its OPB, dunno
    how to get x86's equivalent to OpenBoot.That would be the configuration manager. Its the question you get in the beginning where it asks you what image to boot ('press b or enter to boot normally'). If you press escape there you get into the section where you can determine the default boot device and add new hardware drivers when needed.

Maybe you are looking for