[SOLVED]eth1 and eth0 keep switching

Ok I've got two NIC's in this computer, one refuses to get an IP address from DHCP the other work perfectly fine. However each time I start up the one that previously was eth0 is now eth1 and vise versa.
eth0="dhcp"
INTERFACES=(eth0)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev f3) # WORKS
05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13) # BORK
[01:21 AM][desktop:~]# uname -rm
2.6.30-ARCH x86_64
Last edited by fumbles (2009-07-01 04:05:07)

http://wiki.archlinux.org/index.php/Ude … _Each_Boot

Similar Messages

After updating to ios5 my i phone and it keeps switching off

I recently updated my Iphone 3gs to iOS5 and now my phone keeps switching itself off and on again,
I like the new iOS so would like to keep it if anyone knows how I can sort this out?

i was having some different issues after the upgrade - my phone wouldn't stay on the 3g network and I couldn't make/receive calls or sms or access the internet via 3G. I tried a regular recovery, which didn't work, but just did a DFU restore. apparently it's a different type of restore... anyway it worked so far.
this is how you do it
They probably used what is refered to as a DFU restore. To do this yourself you must plug the phone into the computer while on. Hold the sleep button for 3s, then hold both the home and the sleep button for 10s, then release the sleep button and hold only the home button untill the phone apears in itunes as a device in recovery mode. If done correctly the iPhone display will remain off once the device has connected. Proceed to restore.
and another guide
http://www.iclarified.com/entry/index.php?enid=1034

HT4623 after the ios 7.0 update my iphone 4s and ipad keep switching in between the home screen and the apple loading screen, can anybody help?

Can anybody help with the above?
i.e
both my iphone 4s and ipad switch in between the home screen and the apple loading screen
Many thanks

I would connect each device to a power source, and then reset them by holding the power button and the home button until they turn off.
If it keeps happening, I would put the devices in recovery mode and restore them with iTunes.
This article will help with that if needed:
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808

[SOLVED] pulsuadio and blutooth auto switch to connected device?

Is there a way to stream audiochannels automatically to a bluetooth speaker when it is connected?
At the moment I have to change manually in pavucontrol Playback section. Otherwise sound is still played via internal speakers..
Any ideas? Thanks!
Last edited by miro279 (2015-02-03 14:03:54)

running:
plasma-framework 5.6.0-2
libbluedevil-frameworks 5.2.0-1
bluedevil-frameworks 5.2.0-1
bluez 5.27-1
bluez-libs 5.27-1
bluez-utils 5.27-1
sbc 1.3-1
pulseaudio 5.0-1
pulseaudio-alsa 2-3
The bluetooth speaker is a Denon Envaya mini, connected in A2DP mode.
The whole setup is not working realy stable at the moment, sometimes the device is connecting just fine and I see it in pulseaudio, sometimes it doesn't and bluetooth is crashing when trying to connect. Same is true for trying with bluetoothctl, so I guess it's not a plasma problem.. I also tried gut versions for most of the packages (at least for pulseaudio, libbluedevil-frameworks and bluedevil-frameworks).
Anyway. even when connecting is successfull, I still have to set the audiostream manually to the speaker with pavucontrol.
I tried to load pulsaudio module-switch-on-connect in default.pa but didn't see a difference.. I'm guessing this should only autoconnect the speaker when present, but what I'd like to do is to automaticly stream audio to the speaker when connected, not to the internal laptop speaker..
Last edited by miro279 (2015-02-03 11:18:03)

One website is redirected to another url and they keep switching back and forth

When I try to open a particular site (nwherald.com), Firefox automatically switches between that url and m.nwherald.com. When loading, the two jump back and forth. This doesn't happen with any other url, and I can open nwherald.com just fine in IE. What gives. It's not much of a newspaper, but it's all we have.

Did this problem occur recently with Firefox? The link runs fine for me; do you have any Firewall rules or antivirus settings that may block links?
It is strange that it is trying to force you to a mobile site, and then back to a desktop version. Would you happen to have Flash disabled? I am wondering if the site is detecting a missing plugin and trying to bring you to a more compatible version.
When you go to the site, you can check if the Web Console shows any errors:
* Tools (or [[Image: New Fx Menu]] > Developer/Web Developer > Web Console
If it is redirecting too quickly, you can temporarily disable redirects:
* Tools (or [[Image: New Fx Menu]]) > Options > Advanced > General
* Check "Warn me when sites try to reload or redirect the page"
Also I doubt this is related to your problem, but I notice you have two versions of Adobe PDF Plug-ins:
* Adobe PDF Plug-In For Firefox and Netscape 11.0.9
* Adobe PDF Plug-In For Firefox and Netscape 11.0.8
Having multiple versions of the same plugin can cause problems as well.

My ipad is working very slow touch screen is not wokring perfectly and apps keep switching off when i play

IPad Mini, 64GB, IOS 8.1.
My IPad is working very slow.
The touch screen is not working as good.
Many problems when i play a game ( Real Racing 3) keeps on turning off when i play.
Camera is also blurry.
Screen sometimes goes blank.

Try these basic troubleshooting steps.
Go to Settings>Safari>Clear History and Website Data
Now close all apps. In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If those three things made no difference, try this. Reset all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
If all of that fails, restore the iOS software. Backup your iPad before you restore, then restore the backup when you are done. If that still doesn't help, restore your iPad as new and start all over again. Most purchased content can be downloaded again at no charge as long as you use the same Apple ID and as long as the content is still available in the store.
Restore iPad to Factory Settings
http://support.apple.com/kb/ht1414
Download Past Purchases
http://support.apple.com/kb/ht2519

Lansdcape & portrait mode keep switching

I have 2 games downloaded from iTunes (Bejeweled & Sonic the Hedgehog) and they keep switching from landscape to portrait, without my intervention.
When I close the games, the menu flips to landscape orientation.
If I click on Cover flow the menu switches back to portrait.
Does anyone know how I can solve this?

I Just spent over an hour with support on this issue and apparently in iOS 8 they removed the option for the phones to lock in landscape mode. So, there is nothing wrong with your phone, unfortunately they removed a very useful feature. Maybe they will see if enough users want it they will fix it in an update.

Windows firewall keeps switching itself on!?

I have a funny problem that the Windows firewall seemingly refuses to accept that there is another firewall on my computer, and instead keeps switching itself on. I keep turning it off all the time, but it just won't take no for an answer.
Every time I start my computer the Windows firewall is on, as well as the Comodo Internet Security firewall that is the firewall I want to run. The Windows security center reports that both firewalls are on (so, in particular, it recognizes Comodo), so I turn off the Windows firewall. This I have to do after every reboot. Also, as soon as I switch from cable Internet connection to wireless connection, the Windows firewall silently turns itself on again. This is a problem since it screws up my wireless connection to have two firewalls running at the same time. Again, turning the Windows firewall off manually works just fine --- or so the system says --- but when there is a change of connection status from cable to wireless the firewall is turned on again.
I have spent quite some time now trying to solve this problem. I finally asked at the Comodo user forum, and got the advice to run services.msc, go to Windows Firewall, right click to get properties and then change the start type from automatic to manual. This works, but now I can no longer check the firewall status in the security center since the whole service has been shut down (I get a popup window with the message "Windows Firewall settings cannot be displayed because the associated service is not running. Do you want to start the Windows Firewall service?"). Therefore, it seems to me that this is a pretty big hammer to use just to stop the Windows firewall from respecting being turned off and staying turned off.
So is there a better way of solving this problem than hacking the settings in services.msc? In particular, could there be some settings for the wireless card that turns the Windows firewall on that I should change instead? I have been trying to search for such settings, but have not found anything. Any advice would be very much appreciated.
To the extent that it is relevant, I am running Comodo Internet Security 3.13 on 64-bit Vista Business SP 2 on a Lenovo X200.

I think you missed the point, the remote app sends a signal to AppleTV to turn it on. I am not sending any signals to AppleTV to turn it on. There is also no HDMI activity, it is purely network. So AppleTV is waking for whatever reason. It shouldn't wake until I tell it to.
Your TV doesn't decide to wake itself does it?
Your VCR/DVD/BR players don't turn themselves on?
Your PC Doesn't? ... unless you've scheduled it.
Your car doesn't randomly start itself?
You see where I'm going with this. There should be an option in ... 'options' to stop this from happening, and also an explanation of what it is doing in the first place. It should not, unless allowed to by the user, wake itself.

Multiple desktops keep switching order

I use multiple desktops (not sure what the feature is called anymore) in 10.8.2. I have about 4 of them, and for some reason, #2 and #3 keep switching places! any ideas why? I just have different browsers, a finder window, (simple stuff) in each one. no full screen stuff, nothing fancy. ARRG!

They are automatically ordered by usage. You can disable that in the Mission Control prefs.

Someone keeps putting my iPhone into lost mode in my other cloud account, and I keep getting out. How do I switch the cloud account to this one, so they won't be able to do it again

Well, for the last week someones been putting my iPhone constantly in lost mode using my apple account and I keep getting out because I know my own password. I want to change the password but two other people I know use it, (who definetly wouldn't do this), someone else probably got ahold of the account and is spamming the phones into lost mode. I'm not in lost mode currently by the way. This repetition is really a hassle for me because I'm not always connected to the internet to get out of the lost mode, a few days ago, I went on a 12 hour flight and both my apple devices were probably put into the lost mode and I wasn't able to use my iPhone or iPad to do work and entertainment purposes. I was literally sitting there for 12 hours! So now that you sat through my problem, which I thank you for greatly, how do I switch apple/cloud accounts on my devices so this won't happen again? I hope you can give my solution, if there is one out there, and thank you in advance for atleast trying to solve my problem.

The only way this can happen is with access to your id and password
Read this and focus on "changing your Apple id"
http://www.apple.com/support/appleid/manage/

When i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i

when i m in a call i touch the screen with my cheek and i keep on putting calls on hols or speaker..how do i solve this?if i don t want a headset?

SORRY, the picture is just to illustrate and to better show the area where the time display is located, same place in the iPhone 3gs, to my knowledge, the location is the same, due to the OS on both phones.
Second, run the test to see if it works:
1st test: go to phone mode, select dial key pad, put the tip of your thumb in top of the time display ( the screen will not go black), try to dial.
2nd test: place a call, after starts ringing switch the display to dial pad, put the tip of your thumb on top of the time display, the screen will not go black, try to dial.
THE SCREEN WILL ONLY GO BLACK ( INACTIVE) IF YOU TOUCH A LARGER AREA TO THE TOP OF THE DISPLAY, IF THE THUMB ONLY TOUCHES THE TIME DISPLAY AND A LITTLE PART OF THE AREA WHERE THE NUMBERS APPEAR THE DIAL PAD DID NOT WORK EVEN WITH THE DISPLAY NOT GOING BLACK (INACTIVE).
I am also trying in my wife's iPhone 4 as I right this post and both phones behave the same way.
I found out what I stated above after running tests to see if the case was affecting the phones performance.
Due to the thickness of the case on the sensor area, it really did affect the way the sensor was supposed to work, after I cut that part on the case, the sensor started to work perfectly and the screen turns off during a call like it is supposed to do.
So before someone go nuts thinking that the phone is not working and that they have to take it to repair, try seeing if the case is not interfering with the phones performance.

ADSL keeps switching between 'fast' and 'interleav...

Hello
I wonder if you could tell me if there is some reason why my line profile / ADSL latency keeps being switched between 'fast' and 'interleaved'. Everytime it is switched from interleaved to 'fast' I lose download speed. It has just changed again today and as a result my download speed has (according to my BT Home Hub Manager) dropped from 6.3MB (yesterday) to 3.2MB (now). Is it possible to have the line profile left as 'interleaved' so that I can enjoy the extra download speed ?
Thanks for your help.
Fortinbras
Solved!
Go to Solution.

Hi
I am sorry to see you are having problems with your BT Service
I suggest you contact the forum mods they should be able to get interleaving turned on for you this is a link to them http://bt.custhelp.com/app/contact_email/c/4951
They normally reply by email or phone directly to you within 3 working days they will take personal ownership of your problem until resolved and will keep you informed of progress
They are a UK based BT specialist team who have a good record at getting problems solved
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Display keeps switching between primary and clone.. I think.

My laptop, Pavilion DM3, keeps switching displays by the screen blacking out yet the computer still running. If a video is playing for example I can still hear the audio but the screen goes black. Some little musical tone plays when it switches and sometimes I get a little notification box that pops up saying the optimal resolution for clone display is... or it will say the optimal resolution for the primary is...
It's incredibly frustrating. Sometimes it only happens once every few minutes and sometimes it happens once every few seconds. I usually press ctrl+alt+f3 which works but it's annoying to have to keep doing it. I took it to Best Buy and they reinstalled the drivers and said that should work and if it doesnt then the next step is to ship it off to HP and that could take weeks. The problem is I'm currently in grad school and this is my only computer. I can't go weeks without my laptop even if it means having my screen black out every few seconds. Hopefully it really is just a setting or something or a software thing that I can fix myself with the help of you fine people.
My laptop is an HP Pavilion dm3 with Windows 7 64bit. Intel Pentium processer U5400. Optimal resoolution is 1366x768. Graphics is Intel HD Graphics(integrated I believe?) 4 GB memory, 500GB hard drive. I've had the laptop may six weeks and it's been having the issues for about two weeks.

Hi juniorkk,
I can understand your frustration with the screen issue and I will be happy to help. What version of operating system are you using? What is the product number for your computer? Are you using this with two monitors as well?
Find your product on a notebook:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c00033108
Finding your OS:
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

My iPod 5th gen. doesn't have a back camera. Can I trade it in for one that does have a back camera? If I can, can I keep all my pictures and have them switched over to the other one?

If you purchased it from Apple within the last 14 days then you can return it for a full refund. otherwise no. If you purchased it elsewhere you have to check with them.
Do this to transfer info
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

My iphone 4 keeps switching songs, playing and pausing by itself especially when I use my headphones

Ever since I installed the iOS 7.1 update, my iPhone 4 keeps playing, pausing, switching to the next song, fast forwarding by itself. Especially when I use my headphones. It's getting really frustrating because not only is it when I listen to the music player, but also on youtube videos and then it pause the video and then play the music from the music player or it would pause music on soundcloud by itself too. This mostly happens when I use my headphones but when I don't use my headphones I don't see it happening.
A friend called me and I was using my headphones and the conversation kept getting hanged up by itself it wasn't until I stopped using the headphones that I could have a normal converstation, but I only talked for less than a minute without the headphones so it wasn't enough to tell me that it is the headphones that is the problem. So is it my phone or my headphones? Is this a software problem because of the update because my headphones were not doing this before, HOW CAN I MAKE THIS STOP. (This has been happening for almost a week now)
BTW: I also noticed that if I am listening to music on the music player or youtube and its in my pocket or hand and Im jumping to the song or shaking (lol) the songs pause and plays then switches to the next song aaaaurrrrrruuuuuuuggggggghrrrrrghhhhhhh WHATS GOING ON

Hello alplease,
It sounds like your touch screen is acting erratically and seems to be exacerbated when you have your earphones in. I recommend the information in the following article named:
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Restart your device
Hold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you can't restart your device, reset it by pressing and holding the Sleep/Wake button and the Home button at the same time for a least ten seconds, until the Apple logo appears.
Clean the screen with a soft, slightly damp, lint-free cloth.
Avoid using the device while wearing gloves, with wet hands, or immediately after applying hand lotion.
If you have a protective case, or if you are using a plastic sheet or film on the display, try removing them and testing the device without it.
If the steps above don't resolve your issue, please schedule a service appointment with an Apple Retail Store for evaluation. If an Apple Retail store is not an option, contact Apple to find out your best service option or see theService FAQ for your product.
You can also try closing all the open apps:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Regards,
Sterling

[SOLVED]eth1 and eth0 keep switching

Similar Messages

Maybe you are looking for