[SOLVED] Ethernet stops working after a while

When I work on this computer, the ethernet stops after a while, sometimes this is after 2 minutes, sometimes after half an hour. When I do
sudo /etc/rc.d/network restart
everything works again for a while. The internet doesn't work in chromium nor pacman so it isn't just one application.
Anyone knows how I can find the cause of this?
Thanks already!
Last edited by AlexCogn (2012-10-14 07:21:25)

Also, tell us about your network.  Are you plugged into a corporate or school network? your own private router? into a DSL or Cable modem?
When it stops, what is the output of ip link  ??
of ip addr  ??
of ip route  ??
What is the make, model and chipset of your NIC?
Last edited by ewaller (2012-10-08 16:08:19)

Similar Messages

  • X121e touch pad buttons stop working after a while

    Hello everyone,
    I have a lenovo thinkpad x121e.
    The buttons above the touchpad (for right and left clicking) and also the trackpoint stop working after a while (about 45 min). Although the touchpad itself works without problems.
    If I reboot the operating system (Windows 7, 64-bit version) everything works fine for a while and then the buttons and trackpoint won't respond again.
    It is always the same routine. Rebooting windows, everything alright, stop working, ...
    I am using the newest driver version and de- & reinstalling of UltraNav haven't solved the problem.
    Has anyone an idea what causes my problems with the touch pad buttons and how to solve it? (I guess it's not a hardware problem.)
    Many thanks in advance.

    Hi again, li-lup
    I would recommend trying to use the standard Synaptics driver found here. Synaptics is the company that develops the UltraNav software, so there should be no loss of compatibility/features. I have witnessed several cases where this driver has helped others with mouse issues, so it may help yours as well.
    The first thing you will need to do is to remove the UltraNav driver from the system. To do this, open the Start menu and type Device Manager into the Search box, and then press Enter. Once here, double click on Mouse and other pointing devices, and then right-click on the UltraNav device. Naviage to the Driver tab and select Uninstall... from the bottom of the window. Follow the prompts to uninstall and then restart when prompted by Windows. Windows should install a generic driver that will allow you to use the TouchPad when downloading the Synaptics driver. 
    Hope it helps,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Pavilion g6 sound stops working after a while

    Over the past week the sound in my laptop has begun to stop working after a while of the laptop being on. It works initially but after a while when I check it doesn't work anymore. The mute button does not mute work, the volume increse and decreases on the screen but it does not affect the absense of sound. Please Help. 
    System Details: HP Pavilion g6, Windows 8

    HI. I'm having the same problem. This has been happening for some time now. I can play anything with sound and then it suddenly goes and I can't use the mute/on/off or work out what's happening. Is it a fault? 

  • USB Ethernet stop working after 10.7.5 update

    After updated to 10.7.5, my usb ethernet stop working, and always shows it doesn't connect.
    Reinstall 10.7.5 make no difference.
    How do I solve it?
    Thanks!
    Yu-Hsuan

    Or download it directly from ASIX Electronics instead of driversworld.us.
    Product family: USB 2.0 to fast Ethernet
    Product name: AX88772
    URL: http://www.asix.com.tw/download.php?sub=downloadsearch&PSNoID=101
    I installed it and my AppleUSBEthernet started to work.
    The error i had (sudo dmesg):
    AppleUSBEthernet::monitorLinkStatus - Link down, Device b470200
           0        0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, re-trying...
           0        0 AppleUSBEthernet: monitorLinkStatus - Link partner register is bad, trying to reset...

  • Mouse and Keyboard stops working after a while

    Hi, I'm not even sure where to start to find the cause of the problem. I have a normal ps/2 keyboard and USB optical mouse, both of them just stops working after a few hours. The light on the mouse just dies and the keyboard is not responsive at all.  I have to do a hard reboot of my computer. How and where can I diagnose the problem? I noticed the problem started when I upgraded to the latest kernel.

    And then after a while it will just use a new address:
    Oct 31 01:47:15 wdesktop usb 1-1: USB disconnect, address 6
    Oct 31 01:47:15 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 7
    Oct 31 01:47:16 wdesktop usb 1-1: configuration #1 chosen from 1 choice
    Oct 31 01:47:16 wdesktop input: Microsoft Microsoft Wheel Mouse Optical as /class/input/input8
    Oct 31 01:47:16 wdesktop input,hidraw0: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical] on usb-0000:00:10.0-1
    Then after that my mouse is unusable, the following is shown:
    Oct 31 01:48:41 wdesktop usb 1-1: USB disconnect, address 7
    Oct 31 01:48:41 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 8
    Oct 31 01:49:13 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 9
    Oct 31 01:49:45 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 10
    Oct 31 01:49:56 wdesktop usb 1-1: new low speed USB device using uhci_hcd and address 11
    Oct 31 01:50:08 wdesktop uhci_hcd 0000:00:10.0: Controller not stopped yet!
    Unplugging and plugging the mouse back does not work
    I found a workaround for that by unplugging the mouse, removing the uhci_hcd and adding it back, so:
    sudo rmmod uhci_hcd
    sudo modprobe uhci-hcd
    But I'm still not sure what causes the problem.
    Last edited by willy (2008-10-30 15:02:54)

  • ADF: Page navigation and buttons stop working after a while

    Hi all,
    We have a web app built with ADF Faces/JDev 10.1.3 that runs in OC4J 10.1.2.0.2. Sometimes we encounter this problem in our JSF pages: after a while (can't relate to some particular action), all navigation in a page (links, tabs, buttons, etc) just stops working, i.e. you can click them, the server receives some request (we see this in the logs), but the desired action never happens. It's just like the page keeps refreshing all the time. There is no navigation out of the page at this point, it's completely stuck.
    If, at the same time, we connect to the app from a different browser, it will work fine, but the first browser will remain in the faulty state.
    I turned the enableTokenValidation in the pages on and off, but it seems to make no difference. Can anyone provide an idea about what might be going on?
    Thanks,
    Serban

    Hello,
    Any answer on this issue? It seems that ADF is pretty unstable if user clicks repetedly on the same submit button (like a double-click) or on different tabs on the old page, until the next page loads. We are using .jspx pages and combined with SSL access this behaviour is behaving even worser.
    Basically we encounter the following problems:
    1) It seems that users with not so good network access (and accessing ADF app on a SSL OC4J) still have access to the origin page until the target page loads on a submit. If they click a different button or tab on the origin page in this interval (waiting for their previous action to complete), they usually get a JavaScript error that will block the interface until they do a manual refresh (F5)...
    This can be reproduced even on client machines with good network access if you click very fast on the same button twice or on two different submit buttons.
    2) It seems that sometimes the browser keeps showing the loading bar in the status bar even if the new .jspx page is already loaded. Any advice on how to solve this, as the users might be tempted to push application buttons or browser navigation thinking that the page is blocked?
    All the above happen on IE 6, which is the preffered browser.
    Thanks! I can give you more details if needed.

  • Audio stops working after a while (30+ minutes uptime with audio)

    I'm having one hell of a time with the audio on my machine hope someone can help...
    (edit: forgot to mention, installed packages: pulseaudio-alsa, pulseaudio-gconf and paprefs, using i3 WM and SDDM. Switching to i3 and SDDM are the biggest recent changes I made before this started, although I did pacman -Syu at some point around then too)
    Here's what I'm experiencing:
    Start up my machine, and usually watch some videos and play some video games.
    After things have been running for a while (anywhere between 30 mins and a few hours) I'll quit my game, load up a different video, or do something else that involves quitting an application that plays audio.
    From this point on, any new application that are opened (including new tabs in any web browser) will not play audio, even if other applications are currently playing audio.
    I haven't been able to reproduce the issue reliably.
    I've tried examining the output of "pacmd list", and I thought I had found some differences yesterday between when its working and when its not, bot today the output is different when audio isnt working than it was yesterday. (actually, I just checked again, and now it is the same as yesterday). I can post the output from when its working vs when its not working if that helps diagnose anything. The only differences that seemed significant is that there is a second module called "module-alsa-card" listed after the sound stops working, two new sources are listed for what I believe are my headphones and mic plugged in the rear panel, and a new card shows up which I think is the onboard audio. It almost seems like pulseaudio is taking over my soundcard when I stop using it, and in doing so prevents audio from playing.
    There are a couple of times when it just started working again, without me doing anything at all. I'm really losing my mind over this, any advice is welcome!
    Last edited by beizhia (2015-05-28 05:15:19)

    Hi,
    Try the following.
    Open windows Control Panel, open Windows Update, select 'View update history' in the left hand pane and then select 'Installed updates' link in the following window.
    Locate update KB2962407, right click it and select Uninstall.  When done, restart the notebook, open windows Control Panel, open Windows Update and select 'Check for updates'.  You'll see the update you just uninstalled being offered again - right click and select 'Hide Update'.
    After this you may or may not need to delete and reload the Audio driver - if you do, the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
    Recovery Manager - Windows 8.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • USB Ethernet stop working after hotplug

    I have found that my Apple USB Ethernet dongle stop working if I plug in another USB device. This happens both using a USB hub, and when plugging directly into the MacBook Air. I also see this problem when using a similar dongle from another supplier (called AX88x72A). The USB Ethernet dongle works fine after booting, with status "Connected", but if I plug in another device like my phone or a  USB drive, the status changes to "Cable Unplugged" after a few seconds, ifconfig no longer show the en1 interface, and syslog gives a few error lines such as:
    Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: en1
    Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: Ethernet \[AppleUSBEthernet\]: Link down on en1
    Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: AppleUSBEthernet::prepareForFlash - Link down, Device 87bf600
    Fri Jan 13 13:17:19 Airbook-II kernel[0] <Debug>: AppleUSBEthernet::prepareForFlash - Link down, Device 87bf600
    After this, I must reboot the MacBook Air to get the dongle working again. Do anybody know how to force the AppleUSBEthernet driver to rescan the device tree (or something similar)?
    With regards,
    Birger Retterstøl Olaisen

    I have exactly the same problem here (MacBook Air 2,1 - OSX 10.6.8). After several tries (and reboots!), I've found that an unload/reload of the USB Ethernet driver works.
    Note that operation is not automatic: I have to execute commands in a terminal in order to retrieve my Ethernet connection... but it is far better than a reboot!
    So, if  you want to test my method, once you have plugged a USB key (or after an hotplug of your USB-ethernet dongle), you can execute these commands on your terminal (note there are 2 lines and no space in the kext name, a space may be inserted by this forum):
    sudo kextunload /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleUSBEth ernet.kext
    sudo kextload /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns/AppleUSBEth ernet.kext
    Of course, i've made a small script with these commands, and copied it on my PATH so it is even easier to execute it. It works perfectly for me, and I hope it could help.
    David.

  • Mail stops working after a while

    3G phone here set up to use Yahoo Mail. After awhile, it simply stops working. Even using the refresh button didn't do anything other than glowing for a sec and then nada, mail is not updated. Anyone else seen this problem? The only workaround I have found is to delete the yahoo mail account and re-add it. What a pain.

    I think I may have a variation of this problem.
    Unfortunately I can't confirm right now because apparently no iphones are getting email or web access unless they're on wifi...
    I'll be 3g connected and either using email - my domain or web. without warning the access just goes away. Workarounds that have previously restored access -> disabling / enabling 3g. shut down & Restart the phone.
    Short of those 2; possibly going to airplane mode & back, the access remains gone until recycling somehow.

  • [SOLVED] Amarok stopped working (after downgrading from kde4)

    Hey,
    I played around a bit with kde4 (from tardo's repositories), then uninstalled it.
    And now - amarok stopped working entirely.
    When I type "amarok" in the terminal, I get:
    amarok: error while loading shared libraries: libkdecore.so.5: cannot open shared object file: No such file or directory
    So I tried setting it up manually in "/opt/kde/lib", and typed:
    ln -s libkdecore.so.4.2.0 libkdecore.so.5"
    Still no luck. Now the file exists:
    lrwxrwxrwx 1 root root 19 2008-01-22 21:35 libkdecore.so.5 -> libkdecore.so.4.2.0
    but I keep getting the same error message.
    Any thoughts?
    thanks a lot,
    fiod
    Last edited by fiod (2008-01-25 18:30:04)

    I'd say it would be a bad idea to be symbolic link things like that, but it might work since I have libkdecore.so.4 linked to the same thing.
    What version of amarok do you have? I have 1.4.8-2 which is the newest in the extra repositories. If you have something else it might have gotten pulled in from testing or a kde4 repository.  Maybe try reinstalling amarok-base

  • Why do my hyperlinks stop working after a while?

    On many occasions, I make a hyperlink, publish my site and it works for a while, then the link disappears.
    Why does this happen?
    On other occasions, I paste the link into the hyperlinks box, check to make sure it is there, but when the site publishes, the link just disappears.
    These are two separate happenings.
    Could you tell me what I am doing wrong and how I can correct it?
    Thanks for the help.

    I do that. I have a Mac so I hit the return key. My links work for a while after my site is published, then they just disappear. My followers will write me and say 'not working'. It doesn't happen all the time but often enough that it's troublesome if I'm launching a new design.
    In other instances, I paste in the link, hit the return key, see it in the window but when I publish my site, no link.
    I can struggle through, it's just annoying and I thought I would ask.
    Thanks for your help.

  • Remote Desktop sound stops working after a while.

    Has anyone a solution to this problem of the sound just dropping out of a RDP connection after a day or two?
    Win Server2008 (32 bit) running as a Terminal Server.
    WIN 7 Clients (32 bit)
    Sound is absolutely critical on the program being ran on the WIN7 clients when connecting via RDP to the Server 24/7.
    But the sound just stops working on the RDP clients after a day or two.
    If I minimize the RDP session and try the sound from the native windows session it works, but sound is not working within the RDP session.
    and it takes a restart of the RDP session to restore sound, but then aftera day or two I get a call to say the sound is no longer working- a restart of the RDP sessions restores the sound.
    I have checked the Environment sound settings in the RDP setup on the clients and have them set to play on the client, and I have checked that sound is not disabled in the Terminal Server end of things for RDP sessions.
    I would really appreciate to help with this if anyone has suggestions.

    OK after updating the Server and clients I am still having this issue :( 
    and just today after no sound problems for 6 days the sound dropped out on a couple of RDP sessions, yet the sound on the client itself worked fine when tested (minimise the RDP session).
    It took the RDP sessions to be restarted to restore the sound within the session.
    I have found similar (old) thread regarding this problem:
    https://social.technet.microsoft.com/Forums/windowsserver/en-US/958fd891-6f55-432b-8268-a326ac6b2b2e/sound-in-remote-desktop-session-stops-working
    but no one has informed about if as solution was ever found.

  • [SOLVED] USB stop work after suspend (only right ports!!!)

    Hi,
    It drives me crazy!
    I recently installed Arch on my new laptop SAMSUNG NP900X4C that have 3 USB ports, one in the left side and two in the right side . When I boot the system (or reboot) all USB ports works fine, but after system suspend like close lid, only the left port go back work.  dmesg shows nothing when I plug a pendrive in the any right USB ports, even less lsblk.
    This is my dmesg out when I connect the pendrive in all ports after boot:
    [ 181.776489] usb 1-1.2: new high-speed USB device number 5 using ehci_hcd
    [ 181.880249] Initializing USB Mass Storage driver...
    [ 181.880381] scsi6 : usb-storage 1-1.2:1.0
    [ 181.880498] usbcore: registered new interface driver usb-storage
    [ 181.880500] USB Mass Storage support registered.
    [ 182.883580] scsi 6:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5
    [ 182.885191] sd 6:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 182.886674] sd 6:0:0:0: [sdb] Write Protect is off
    [ 182.886688] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
    [ 182.887530] sd 6:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 182.898516] sdb: sdb1
    [ 182.901936] sd 6:0:0:0: [sdb] Attached SCSI removable disk
    [ 185.427222] usb 1-1.2: USB disconnect, device number 5
    [ 188.486360] usb 2-2: new high-speed USB device number 2 using xhci_hcd
    [ 188.503289] usb 2-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 188.505259] scsi7 : usb-storage 2-2:1.0
    [ 189.506730] scsi 7:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5
    [ 189.508371] sd 7:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 189.510955] sd 7:0:0:0: [sdb] Write Protect is off
    [ 189.510968] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
    [ 189.512566] sd 7:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 189.523657] sdb: sdb1
    [ 189.527290] sd 7:0:0:0: [sdb] Attached SCSI removable disk
    [ 191.469673] usb 2-2: USB disconnect, device number 2
    [ 193.515534] usb 2-1: new high-speed USB device number 3 using xhci_hcd
    [ 193.532133] usb 2-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
    [ 193.533952] scsi8 : usb-storage 2-1:1.0
    [ 194.535796] scsi 8:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5
    [ 194.537477] sd 8:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 194.540055] sd 8:0:0:0: [sdb] Write Protect is off
    [ 194.540069] sd 8:0:0:0: [sdb] Mode Sense: 43 00 00 00
    [ 194.541588] sd 8:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 194.553582] sdb: sdb1
    [ 194.557933] sd 8:0:0:0: [sdb] Attached SCSI removable disk
    [ 196.298812] usb 2-1: USB disconnect, device number 3
    Same after suspend:
    [ 568.168987] PM: Syncing filesystems ... done.
    [ 568.187450] PM: Preparing system for mem sleep
    [ 568.259525] Freezing user space processes ... (elapsed 0.01 seconds) done.
    [ 568.270762] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
    [ 568.284097] PM: Entering mem sleep
    [ 568.284201] Suspending console(s) (use no_console_suspend to debug)
    [ 568.298234] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 568.300100] sd 0:0:0:0: [sda] Stopping disk
    [ 568.949683] PM: suspend of devices complete after 665.917 msecs
    [ 568.950083] PM: late suspend of devices complete after 0.395 msecs
    [ 568.963325] r8169 0000:02:00.0: wake-up capability enabled by ACPI
    [ 569.016282] PM: noirq suspend of devices complete after 66.291 msecs
    [ 569.017160] ACPI: Preparing to enter system sleep state S3
    [ 569.036433] PM: Saving platform NVS memory
    [ 569.042305] Disabling non-boot CPUs ...
    [ 569.044189] smpboot: CPU 1 is now offline
    [ 569.047218] smpboot: CPU 2 is now offline
    [ 569.049866] smpboot: CPU 3 is now offline
    [ 569.050441] Extended CMOS year: 2000
    [ 569.052505] ACPI: Low-level resume complete
    [ 569.052550] PM: Restoring platform NVS memory
    [ 569.052918] Extended CMOS year: 2000
    [ 569.052981] Enabling non-boot CPUs ...
    [ 569.059788] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 569.074350] CPU1 is up
    [ 569.074412] smpboot: Booting Node 0 Processor 2 APIC 0x2
    [ 569.088727] CPU2 is up
    [ 569.088868] smpboot: Booting Node 0 Processor 3 APIC 0x3
    [ 569.103096] CPU3 is up
    [ 569.108227] ACPI: Waking up from system sleep state S3
    [ 569.262105] PM: noirq resume of devices complete after 106.814 msecs
    [ 569.262496] PM: early resume of devices complete after 0.234 msecs
    [ 569.262565] i915 0000:00:02.0: setting latency timer to 64
    [ 569.262604] mei 0000:00:16.0: irq 46 for MSI/MSI-X
    [ 569.262694] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 569.262706] ahci 0000:00:1f.2: setting latency timer to 64
    [ 569.262744] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
    [ 569.262805] r8169 0000:02:00.0: wake-up capability disabled by ACPI
    [ 569.310850] xhci_hcd 0000:03:00.0: WARN: xHC restore state timeout
    [ 569.310949] xhci_hcd 0000:03:00.0: PCI post-resume error -110!
    [ 569.310953] xhci_hcd 0000:03:00.0: HC died; cleaning up
    [ 569.310960] xhci_hcd 0000:03:00.0: HC died; cleaning up
    [ 569.310985] dpm_run_callback(): pci_pm_resume+0x0/0xd0 returns -110
    [ 569.311032] PM: Device 0000:03:00.0 failed to resume async: error -110
    [ 569.312717] mei 0000:00:16.0: wd: failed to find the client
    [ 569.324628] Extended CMOS year: 2000
    [ 569.331940] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
    [ 569.387202] r8169 0000:02:00.0: enp2s0: link down
    [ 569.534701] usb 1-1.5: reset full-speed USB device number 3 using ehci_hcd
    [ 569.621070] btusb 1-1.5:1.0: no reset_resume for driver btusb?
    [ 569.621077] btusb 1-1.5:1.1: no reset_resume for driver btusb?
    [ 569.674395] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 569.675511] ata1.00: configured for UDMA/133
    [ 569.675675] sd 0:0:0:0: [sda] Starting disk
    [ 569.684439] usb 1-1.6: reset high-speed USB device number 4 using ehci_hcd
    [ 569.969276] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S
    [ 569.976072] iwlwifi 0000:01:00.0: Radio type=0x2-0x1-0x0
    [ 570.377316] PM: resume of devices complete after 1116.468 msecs
    [ 570.378930] PM: Finishing wakeup.
    [ 570.378933] Restarting tasks ... done.
    [ 570.409428] video LNXVIDEO:00: Restoring backlight state
    [ 606.007121] usb 1-1.2: new high-speed USB device number 6 using ehci_hcd
    [ 606.092964] scsi9 : usb-storage 1-1.2:1.0
    [ 607.094056] scsi 9:0:0:0: Direct-Access SanDisk Cruzer Blade 1.26 PQ: 0 ANSI: 5
    [ 607.096239] sd 9:0:0:0: [sdb] 31266816 512-byte logical blocks: (16.0 GB/14.9 GiB)
    [ 607.097828] sd 9:0:0:0: [sdb] Write Protect is off
    [ 607.097836] sd 9:0:0:0: [sdb] Mode Sense: 43 00 00 00
    [ 607.098834] sd 9:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 607.110498] sdb: sdb1
    [ 607.113670] sd 9:0:0:0: [sdb] Attached SCSI removable disk
    [ 613.233780] usb 1-1.2: USB disconnect, device number 6
    Nothing appears about the USB ports 2-2 and 2-1. Any ideia?!
    I even tried to install laptop-mode-tools and set CONTROL_USB_AUTOSUSPEND=0 but didn't work
    Last edited by otto_simpson (2013-01-23 01:28:49)

    Oh crap! I am kid with his new toy...
    After a lot of google it I read something about firmware control the wake up of USB 3.0 and when I entered in this laptop BIOS what I found?! This option disabled:
    USB S3 Wake-up [Disable]
    So, just enable it and all my USB ports go back to work after suspend. I don't understand the purpose of it disabled by default.
    Anyway I am sorry for this newbie mistake.
    Last edited by otto_simpson (2013-01-23 04:16:20)

  • [ SOLVED ] Pacman stopped working after last pacman -S pacman

    Hi.
    Today I tried to install a new package, and pacman prompted that there is new version of it, and I have to install it first. I accepted and installed the new version of pacman. They I updated the package list. After a while I had to reboot the machine, because my X crashed, and now pacman command is not doing anything. What can I do.
    [gruntz@tangra log]$ tail pacman.log
    [2009-10-28 20:28] synchronizing package lists
    [2009-10-28 20:29] synchronizing package lists
    [2009-10-28 20:29] synchronizing package lists
    [2009-11-01 10:55] synchronizing package lists
    [2009-11-01 10:55] synchronizing package lists
    [2009-11-01 10:56] synchronizing package lists
    [2009-11-01 10:56] upgraded pacman (3.3.1-1 -> 3.3.2-1)
    [2009-11-01 10:57] synchronizing package lists
    [2009-11-01 10:57] synchronizing package lists
    [2009-11-01 10:59] synchronizing package lists
    [gruntz@tangra log]$
    [gruntz@tangra log]$ sudo pacman
    [gruntz@tangra log]$ sudo pacman -S
    [gruntz@tangra log]$ sudo pacman -Sy
    [gruntz@tangra log]$
    Last edited by Gruntz (2009-11-01 12:04:08)

    [gruntz@tangra ~]$ file /usr/bin/pacman
    /usr/bin/pacman: empty
    [gruntz@tangra ~]$
    What have I done!
    It is the same with makepkg
    [gruntz@tangra ~]$ file /usr/bin/makepkg
    /usr/bin/makepkg: empty
    [gruntz@tangra ~]$
    Last edited by Gruntz (2009-11-01 10:01:22)

  • [SOLVED] Keyboard stopped working after upgrade

    When Arch boots into the login window, keyboard has stopped working (it works in the boot screen, tested with Caps Lock). The mouse is working. I have installed Arch to a laptop and configured Arch to use EFISTUB to boot. I have already confirmed that the kernels and initramfs' in theESP (Arch's kernel, initramfs and fallback are in /boot/efi/EFI/arch. ESP in mounted as /boot/efi) and in the /boot are the same.
    I don't see any FAILED messages during the boot screen.
    Here's the Xorg log: http://pastebin.com/qXwqR3vf
    And lxdm.log http://pastebin.com/DF9bF4R8
    I am running the linux-lts kernel.
    Last edited by kataja (2014-09-21 09:50:14)

    This was caused by a simple reason: keyboard file "en" was missing in the xkbcomp directory. That's od because I haven't touched keyboard settings at all. I changed the keyboard setting in X11 confiure file to "us" as test and now it works.

Maybe you are looking for