[SOLVED] ffmpeg trying to load old libgnutls

So for some reason I can't use FFMpeg from the command line. Any attempt to do so results in the following:
ffmpeg: error while loading shared libraries: libgnutls.so.28: cannot open shared object file: No such file or directory
Some additional information that might be useful:
$ pacman -Qi gnutls
Name : gnutls
Version : 3.4.1-1
Description : A library which provides a secure layer over a reliable transport layer
etc.
$ ls /usr/lib | grep gnutls
libgnutls.so@
libgnutls.so.30@
libgnutls.so.30.0.1*
libgnutlsxx.so@
libgnutlsxx.so.28@
libgnutlsxx.so.28.1.0*
I haven't updated anything related to ffmpeg, gnutls, or nettle (which caused issues before) recently, so I don't think that's the issue. Any ideas?
Last edited by extarius (2015-06-12 03:36:16)

Is your entire system up to date? If so, what is the output of `pacman -Q ffmpeg` and `which ffmpeg`?
Most likely problem is either a partial update or an AUR package that needs rebuilt.

Similar Messages

My phone keeps trying to load old emails

My phone keeps trying to load 2000 old emails (that have been deleted from my computer). How do I get it to stop?

Your profile says you have a PC so you may have to search the web to find out how to delete emails from the server using whatever email client you have (Outlook perhaps) and how to set it so that when you "delete" mail on your computer it deletes it from the server too. You may have to log into your email via your email provider's webmail system to delete these old messages from the server. Hard to say for sure.

[SOLVED] Trying to load old kernel after upgrade

Hi, apologies in advance for asking this if it's a repeating situation but I searched and read for the better part of the day with no avail.
I updated to kernel 3.1.9 today and everything compiles fine, with no errors. After reboot is when it fails to load user specific modules, which I think I narrowed down to /lib/modules/3.1.8. That would make sense because with uname -r it is still showing 3.1.8 after -Syu and reboot but everything else is configured for 3.1.9. I checked the menu.lst and it is pointed to initramfs and the build of that was reported successful. I don't have any kernel .deps from AUR and I was updating with packer anyways. There is one error being reported in xorg.conf that Nvidia driver fails to load and no driver available even though it compiled without issue. Anyways I'm not sure what info to post for you to help me out, but I'll be glad to if you let me know.
Thank guys.
Oh and for the meantime I just downgraded the kernel and everything works fine. I know I could just stay on this setup and be good but I installed Arch specifically to challenge myself and learn.
Last edited by quantumfunk (2012-01-14 21:58:58)

Hi thanks for your response. I made sure to have /boot mounted during the upgrade but it did not alter the outcome.
It is in fact failing to load ACPI modules after the update. If that might be of some assistance.
I'm still reading as much as I can find, maybe you can point me in the direction of a thread that could help?
So far I'm following this one https://bbs.archlinux.org/viewtopic.php?id=114003 to no avail.
Last edited by quantumfunk (2012-01-14 20:02:26)

Lost serial# trying to load old library

I suffered the horrible loss of both my computers to theft a couple weeks ago, and the scum took a back up drive, too. Over 15K images lost : ( They did leave an old external HD, with my old Aperture 1.5 library on it. However, I no longer have the box or serial number for it, but I do have the install CD. I have Aperture 2.1 in a box with serial number, and have not installed it, yet. I don't know if it would work if I did install it, then tried to run that old library. I'm afraid of losing what photos I have left.
I called Apple, and they can't help. I don't have original receipt or don't even remember where I purchased it originally. These are the only photos I have left. I lost thousands of my beloved Assistance dog, and namesake of my photography biz. Heartbreaking. I wish I had stored online now.
Is there any way at all to retrieve the images out of that library on the old external HD?? I can't believe they wouldn't give me another serial number, with the fact I have a new version of Aperture I bought separately, and have that number. Help!

Are you no longer using Aperture? Because the simplest solution would be to buy Aperture 2, and then upgrade the 1.5 library and you're good to go.
If you're not, and you no longer wish to use Aperture, you can still get all the images out of the library. The easiest way would be to use Spotlight to get them.
To do this, go to the 1.5 Aperture library and right click (or control-click) on it, and select "show package contents." In the finder window that appears, type "kind:image" in the search box (no quotes). Then, in the search box that appears below, click the name of your Aperture library (it will appear to the right of the "This Mac" option. Sit back and you should see every image in the Aperture library appear. You can select them all and drag them wherever you want.
Sorry for the loss of your images. Backups are a good idea, because sooner or later you'll need them. Whether it's from accidental deletion, a crashed hard drive, or theft, it will happen

Got 5S and tried to load old info on phone and messed up

I just got a new iPhone. I went to download my music, etc from old phone and hit restore old phone to new phone. Seems I lost all my new pictures and info as a result. Can I get them back? new phone is 5s. old was 4s. I don't want old software. help! I upgraded to the new phone because I had issues with old phone. Don't like the way the photos are, etc. Can I just delete all this and restore again?

Hello abthrelkeld
If you do not like what you had previously, then restore your new iPhone to its original settings. Import the information to your computer and then sync that data to your new iPhone. Check out the articles below on importing your photos and syncing your data back over. Alternatively you can back up using iCloud and can restore that information that was as well.
iOS: Importing personal photos and videos from iOS devices to your computer
http://support.apple.com/kb/ht4083
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12113
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
Regards,
-Norm G.

How to load old voice memos to new iphone 4s

hello,
i'm trying to load old voice memos from 3gs to new 4s.
when i plug in the new 4s i have a playlist called voice memos and it appears to be on the 4s phone but i can't find it on the phone when doing a search for the name and or looking in the voicememo app or music playlist.

wow thats a hard one. Not that many people have that phone. I would probably say go to store and let them try it on the machine. Since its such an old phone its going to be hard. If you synk with outlook tho I am sure you can do it.

Trying to load illustrator 6cs onto new mac and the old activation code for my ill cs doesn't work with it

Trying to load a downloaded version of illustrator 6cs onto new mac and the old activation code for my illustrator cs doesn't work with it. Do I need a new code or am I missing something? Same goes for my Photoshop cs.

you need your serial number.
if you purchased from or registered with adobe check your account, https://www.adobe.com/account.html

HT1766 I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

I have forgotten my iPhone backup password. Is there a way of getting it as I am trying to load my old data from iPhone 4 to an iPhone 5?

If on a Mac, and you elected to save such to your Keychain, you can recover it from your Keychain. Otherwise, you can't.
While you can continue to sync/backup, if you can't remember it & want to remove it, you'll have to delete your existing backups & restore the phone as a new device. Your data will be unrecoverable.

Im trying to load my CS2 PS but its looking for my old copy of PS

Im trying to load my old PS CS2 and its looking for my old disk of 5.5 or higher.. I lost the disk but have the SN# how do i load this. I know in the past Adobe helped me do this..??

When you install the upgrade, the installer will check for a previous qualifying version already installed on your computer. If it cannot detect one, it will ask you to input the serial number for the older software version to verify if it is a valid upgrade.
Once you input the serial number, the installer will use that as a qualifying criteria and continue installation.

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad an

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad and not the other way around. It basically is trying to make my old village the new village, meaning I lose a lot of progress. How do make it combine the 2? If I cannot, is there a way to remove the new village off the Game Center and add the one I want to be saved? Thank you.

You'll have to contact the app developer for help with this.

I tried to load the new firefox, it won't load onto my computer (mac osx) but it also erased the old firefox. Help!

A window came up saying I needed the new firefox. When I tried to load it the window said I couldn't but to click for the most updated firefox. A dmg loaded, asked if I wanted to replace the old firefox, which I assumed I did. Now I have no firefox at all and can't get back to the older version that was working.

Try:
- iOS: Not responding or does not turn on
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

I am trying to load an old windows program in wine and I think that mozilla is marking the program as dangerous and I would like to unblock the install cd.

I have a program, astrodatabank, that I have been using since 2005 or so. The program ran well on Windows XP and Vista operating systems. I tried to load it into my desktop, which runs on the latest verison of Ubuntu. If I try to install from the disk, some of the exe files are not available. If I try to copy the files from the disk to a documents folder, the computer loads everything, except two .exe files. Last night, I got on an XP computer and was able to copy one of the files to a flash drive and copied that file to this computer, but AVAST on that computer decided the files were dangerous. I think I used to have the program installed on that XP computer. Is there a way I can get Ubuntu to let me load the last file and run the install program?

Hello, you need to contact the makers of avast, alwil software
* http://forum.avast.com/
Firefox is not a security program.

Where to down load old version of itune

where to down load old version of itune

Before trying to go back to an old version, see a simpler solution for Windows 7 and similarly Windows XP from Jerry at: iTunes for windows - App Store's blank page - final solution
1. Fixed the itunes store window.
2. Also fixed the backup/sync problem.
3. Even solved the AppleMobileDeviceService.exe high cpu problem.
Please reply after trying Jerry's fix.
https://discussions.apple.com/message/15993286#15993286

Getting ORA-22805 when trying to load XML file using SQLLDR

I'm trying to learn the basics of XML since we'll be getting XML files in the near future. I'm using one of the sample schemas that comes with XMLSPY. I loaded this schema into an 11g Oracle DB using XMLSPY:
<?xml version="1.0" encoding="UTF-8"?>

<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:ipo="http://www.altova.com/IPO" targetNamespace="http://www.altova.com/IPO" elementFormDefault="unqualified" attributeFormDefault="unqualified">
     <annotation>
          <documentation>
International Purchase order schema for Example.com
Copyright 2000 Example.com. All rights reserved.
</documentation>
     </annotation>
     
     <include schemaLocation="address.xsd"/>
     <element name="purchaseOrder" type="ipo:PurchaseOrderType"/>
     <element name="comment" type="string"/>
     <complexType name="PurchaseOrderType">
          <sequence>
               <element name="shipTo" type="ipo:Address"/>
               <element name="billTo" type="ipo:Address"/>
               <element ref="ipo:comment" minOccurs="0"/>
               <element name="Items" type="ipo:Items"/>
          </sequence>
          <attribute name="orderDate" type="date"/>
     </complexType>
     <complexType name="Items">
          <sequence>
               <element name="item" minOccurs="0" maxOccurs="unbounded">
                    <complexType>
                         <sequence>
                              <element name="productName" type="string"/>
                              <element name="quantity">
                                   <simpleType>
                                        <restriction base="positiveInteger">
                                             <maxExclusive value="100"/>
                                        </restriction>
                                   </simpleType>
                              </element>
                              <element name="price" type="decimal"/>
                              <element ref="ipo:comment" minOccurs="0"/>
                              <element name="shipDate" type="date" minOccurs="0"/>
                         </sequence>
                         <attribute name="partNum" type="ipo:Sku"/>
                    </complexType>
               </element>
          </sequence>
     </complexType>
     <simpleType name="Sku">
          <restriction base="string">
               <pattern value="\d{3}-[A-Z]{2}"/>
          </restriction>
     </simpleType>
</schema>
Then I created an XMLType table:
CREATE TABLE purchaseOrder OF XMLType
XMLSCHEMA "ipo.xsd" ELEMENT "purchaseOrder"
I'm trying to load the sample XML file ipo.xml into purchaseOrder using SQLLDR. This is ipo.xml:
<?xml version="1.0"?>

<ipo:purchaseOrder xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ipo="http://www.altova.com/IPO" orderDate="1999-12-01" xsi:schemaLocation="http://www.altova.com/IPO
ipo.xsd">
     <shipTo export-code="1" xsi:type="ipo:EU-Address">
          <ipo:name>Helen Zoe</ipo:name>
          <ipo:street>47 Eden Street</ipo:street>
          <ipo:city>Cambridge</ipo:city>
          <ipo:postcode>126</ipo:postcode>
     </shipTo>
     <billTo xsi:type="ipo:US-Address">
          <ipo:name>Robert Smith</ipo:name>
          <ipo:street>8 Oak Avenue</ipo:street>
          <ipo:city>Old Town</ipo:city>
          <ipo:state>AK</ipo:state>
          <ipo:zip>95819</ipo:zip>
     </billTo>
     <Items>
          <item partNum="833-AA">
               <productName>Lapis necklace</productName>
               <quantity>2</quantity>
               <price>99.95</price>
               <ipo:comment>Need this for the holidays!</ipo:comment>
               <shipDate>1999-12-05</shipDate>
          </item>
          <item partNum="748-OT">
               <productName>Diamond heart</productName>
               <quantity>1</quantity>
               <price>248.90</price>
               <ipo:comment>Valentine's day packaging.</ipo:comment>
               <shipDate>2000-02-14</shipDate>
          </item>
          <item partNum="783-KL">
               <productName>Uncut diamond</productName>
               <quantity>7</quantity>
               <price>79.90</price>
               <shipDate>2000-01-07</shipDate>
          </item>
          <item partNum="238-KK">
               <productName>Amber ring</productName>
               <quantity>3</quantity>
               <price>89.90</price>
               <ipo:comment>With no inclusions, please.</ipo:comment>
               <shipDate>2000-01-07</shipDate>
          </item>
          <item partNum="229-OB">
               <productName>Pearl necklace</productName>
               <quantity>1</quantity>
               <price>4879.00</price>
               <shipDate>1999-12-05</shipDate>
          </item>
          <item partNum="128-UL">
               <productName>Jade earring</productName>
               <quantity>5</quantity>
               <price>179.90</price>
               <shipDate>2000-02-14</shipDate>
          </item>
     </Items>
</ipo:purchaseOrder>
This is what's in the control file:
LOAD DATA
INFILE *
INTO TABLE purchaseOrder TRUNCATE
xmltype(xmldata)
FIELDS
xmldata LOBFILE (CONSTANT ipo.xml)
BEGINDATA
0
The load fails with:
Record 1: Rejected - Error on table PURCHASEORDER.
ORA-22805: cannot insert NULL object into object tables or nested tables
Another question I have is, how do we know how many records (0's) to specify in the control file? In this case there's only one but when real files are used we won't know how many are in the file.
Thanks for your help!

The concept was "Don't use SQL*Loader to parse XML".
You can use SQL*Loader to load an entire XML document into the DB. That is fine. You can do the same via BFILENAME to read in files from disk as well.
If you want to parse XML, do that from within Oracle via PL/SQL and/or SQL. The solution depends upon your version of Oracle and what is good enough for you in terms of performance.
So the basics are
a) How am I getting the information?
b) How am I getting in into Oracle?
c) How do I want to parse it?
As I see the schema, it only allows for one ipo:purchaseOrder node in the document, since that is the root node. If you have multiple in the incoming file, you no longer have valid XML, both per the schema and because you have no single root node. You have an XML fragment, which must be treated different.
Just trying to understand the question since I now realize it does not agree with what the schema in your initial example shows.

Error when trying to load jar file (loadjava)

I have been struggling with this issue for a few days. I read all the old threads and solutions online but none of them worked. I wrote some java stored procedures and have been trying to load the required jar files. The error message I keep getting is this:
ORA-29532: Java call terminated by uncaught Java exception: oracle.aurora.server.tools.loadjava.ToolsError: Error during loadjava: Failures occurred during processing. Check trace file for details
I have tried to load them using Enterprise Manager Console and the following:
call dbms_java.loadjava(' -force -resolve
c:\javacog\cognosClient.jar', ' -resolver "((* PUBLIC) (*
SYS) )"')
Any ideas? We are using Oracle 10gr2, and trying to load Cognos 8.3 SDK jar files. According to Cognos, Java 1.4 is supported.
Edited by: user10406501 on Oct 8, 2008 2:26 PM

Sorry to respond to an old message, I was just looking for the solution for the totally different problem.
Key word 'Cognos' got me here.
I've menage to load Cognos SDK onto Oracle 10.2.0.2 on Windows XP.
I've used simple loadjava script. After that it requires some additional GRANTs, and it works.
If you still are looking for the solution for this problem, respond to this message, and I'll post the scripts.
Thomas

[SOLVED] ffmpeg trying to load old libgnutls

Similar Messages

Maybe you are looking for