SOLVED Fluxbox and Nitrogen problem

Ok so I've tried many ways to set my background in Fluxbox. I try not to ask for help but this is really frustrating me. So I installed nitrogen, went to the directory my background is at, and hit apply, and it worked. So then I went to my ~/.fluxbox/startup file and added in "nitrogen --restore &" like below. However it didn't work. I really want this to work, I spent a large amount of time earlier today trying to get fbsetbg to work, then trying to get feh to work, none of it worked for me.
# Applications you want to run with fluxbox.
# MAKE SURE THAT APPS THAT KEEP RUNNING HAVE AN ''&'' AT THE END.
# unclutter -idle 2 &
# wmnd &
# wmsmixer -w &
# idesk &
nitrogen --restore &
# And last but not least we start fluxbox.
# Because it is the last app you have to run it with ''exec'' before it.
Last edited by Spheres (2012-08-05 23:09:15)

Not necessarily.
Do any other apps you put in ~/.fluxbox/startup run?
Check /usr/share/xsessions/fluxbox.desktop and make sure it says "exec startfluxbox" and not just "exec fluxbox"
I'm starting fluxbox from .xinitrc with "exec startfluxbox" and if I set wallpaper with feh, this works in my ~/.fluxbox/startup file:
eval $(cat ~/.fehbg)
and if I set wallpaper with nitrogen, this works:
nitrogen --restore
(edit) -- as ewaller says, have you set a wallpaper with nitrogen? "nitrogen --restore" won't work unless you do...
Last edited by 2ManyDogs (2012-08-05 19:35:47)

Similar Messages

[SOLVED] Fluxbox and gtk theme

I have a problem with fluxbox. Some programs using gtk themes (e.g. spacefm, audacious) have ugly grayish 'redmond' look. I have tried to follow this how-to:
http://wiki.fluxbox.org/index.php?title … gtk_themes
and also tried to switch theme with lxapperance and gtk-chtheme. No success. The gtk-chtheme shows a correct theme, so within the preview the theme is fine. However, it won't change the appearance of other windows. Some other programs like firefox or thunderbird change the theme.
I have also tried to compile spacefm with gtk3 support and use adwaita theme. Again I got the ugly look. In other desktop managers, e.g. lxdm both spacefm and audacious look as expected.
Last edited by kmiernik (2013-05-15 11:23:25)

Thanks guys! It must have been something in the .config/gtk-3.0 folder. Once I removed it and created settings.ini like this one:
[Settings]
gtk-theme-name = Adwaita
gtk-icon-theme-name = Tango
gtk-fallback-icon-theme = gnome
gtk-font-name = Sans 8
gtk-auto-mnemonics = 1
gtk-visible-focus = automatic
I can have a normal appearance of gtk3 applications. Interesting thing is that this is exactly the same settings file I have tried before. Probably something else in the folder was overriding the theme.
Last edited by kmiernik (2013-05-15 11:24:06)

[solved] Shutdown and Mount problems

Hello Arch-community
I did a fresh webinstallation with xfce.
Everybody seems to be running fine, expect this rights problem with shutdown/reboot and mounting CDs and other partitions.
This is my ~/.xinitrc:
exec ck-launch-session dbus-launch startxfce4
The daemons look like this:
DAEMONS=(syslog-ng !network netfs crond dbus hal networkmanager)
My user is in the following groups:
lp wheel games network video audio storage scanner power
I also added the code from the HALs-wikipage to /etc/PolicyKit/PolicyKit.conf - However the folder didn´t even exist and I had to create that file.
And I can´t seem to find any other solutions =/
I hope you can help me...
Last edited by TheBigMole (2011-03-20 02:47:35)

stqn wrote:Maybe you are using the /etc/inittab method for autologin?
No, I was using the ~/.bash_profile method. I tried commenting it out and starting xfce manually after login with the same problem.
However, while rereading the wikiarticle I decided to use slim, which solved my problems.
Thank you for yor help, everyone!

[SOLVED] SSD and boot problem

I recently bought a new 30GB Corsair SSD, and it runs wonderfully. However, the device takes a considerably long time to initialize on boot (~30-45 seconds).
Here's a snippet of the relevant dmesg output:
[ 23.360042] ata5: lost interrupt (Status 0x58)
[ 23.363366] ata5: drained 65536 bytes to clear DRQ
[ 23.447633] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 23.447673] scsi 4:0:0:0: CDB: cdb[0]=0x12: 12 00 00 00 60 00
[ 23.447683] ata5.00: cmd a0/01:00:00:60:00/00:00:00:00:00/a0 tag 0 dma 96 in
[ 23.447684] res 40/00:02:00:24:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 23.447754] ata5.00: status: { DRDY }
[ 23.447810] ata5: soft resetting link
[ 23.653843] ata5.00: configured for UDMA/33
[ 23.654431] ata5: EH complete
[ 23.654435] scsi scan: 96 byte inquiry failed. Consider BLIST_INQUIRY_36 for this device
[ 23.657130] scsi 4:0:0:0: CD-ROM TOSHIBA DVD-ROM SD-R1312 1011 PQ: 0 ANSI: 5
[ 54.373360] ata5: lost interrupt (Status 0x58)
[ 54.376674] ata5: drained 65536 bytes to clear DRQ
[ 54.465937] ata5.00: limiting speed to UDMA/25:PIO4
[ 54.465941] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 54.465985] sr 4:0:0:0: CDB: cdb[0]=0x5a: 5a 00 2a 00 00 00 00 00 80 00
[ 54.465996] ata5.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 0 dma 16512 in
[ 54.465997] res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 54.466085] ata5.00: status: { DRDY }
[ 54.466144] ata5: soft resetting link
I haven't encountered this problem with any other drive I've put in there, so I'm guessing it must be SSD-related. Has anyone else experienced something similar, and could you point me in the right direction? Thanks.
Last edited by itsbrad212 (2012-04-01 00:05:28)

itsbrad212 wrote:
falconindy wrote:Consider RMA'ing the drive.
Do you think it's defective/worth replacing? It's more of an annoyance than anything, and the drive has no other visible issues other than on initialization.
Yes, I do. Healthy drives don't timeout on simple DMA initialization requests.

Need help solving listener and Oracle problems with Mac OS X 10.4 "Tiger"

I have Oracle 10g working on Mac OS X 10.4 "Tiger" except for the listener and Oracle net 8 configuration. I have not been able to get the Oracle listener to work with my built in Mac Airport wireless network card or built in ethernet card. I keep getting the errors
connection refused cannot start listener. Can anyone offer help?
Thanks
Ben
[email protected]

Hi Ben,
how does your listener.ora look like ?
Mine is:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = ronald-g4-eth)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = ronald-g4-wifi)(PORT = 1521))
and listens to the ethernet and airport address.
When do you get the problems ?
regards,
Ronald
http://ronr.nl/unix-dba

[SOLVED]mplayer and urxvt problems after update

Hello to all fellow archers!
Couple of days back, I updated xorg-server, like most of the people around here, so I asume that issues I`m going to describe, could be related to xorg-server being recently updated.
First issue is related to mplayer not playing movies in fullscreen format, despite being told to do so. The image size of a video is about 20% of screen resolution size, while the rest of the screen is just black.
MPlayer 1.0rc2-4.3.2 (C) 2000-2007 MPlayer Team
CPU: AMD Athlon(tm) Processor (Family: 6, Model: 6, Stepping: 2)
CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 0
Compiled with runtime CPU detection.
115 audio & 237 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing Death.Proof[2007][Unrated.Editon]DvDrip[Eng]-aXXo.avi.
AVI file format detected.
[aviheader] Video stream found, -vid 0
[aviheader] Audio stream found, -aid 1
VIDEO: [DX50] 664x280 12bpp 23.976 fps 741.7 kbps (90.5 kbyte/s)
Clip info:
Software: VirtualDubMod 1.5.10.1 (build 2366/release)
SUB: Detected subtitle file format: microdvd
SUB: Read 1877 subtitles.
SUB: Added subtitle file (1): ./Death.Proof[2007][Unrated.Editon]DvDrip[Eng]-aXXo.srt
[VO_XV] It seems there is no Xvideo support for your video card available.
[VO_XV] Run 'xvinfo' to verify its Xv support and read
[VO_XV] DOCS/HTML/en/video.html#xv!
[VO_XV] See 'mplayer -vo help' for other (non-xv) video out drivers.
[VO_XV] Try -vo x11.
==========================================================================
Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
Selected video codec: [ffodivx] vfm: ffmpeg (FFmpeg MPEG-4)
==========================================================================
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 48000 Hz, 2 ch, s16le, 112.0 kbit/7.29% (ratio: 14000->192000)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [oss] 48000Hz 2ch s16le (2 bytes per sample)
Starting playback...
VDec: vo config request - 664 x 280 (preferred colorspace: Planar YV12)
VDec: using Planar YV12 as output csp (no 0)
Movie-Aspect is 2.37:1 - prescaling to correct movie aspect.
VO: [x11] 664x280 => 664x280 Planar YV12
[swscaler @ 0x89d5f50]SwScaler: using unscaled yuv420p -> rgb32 special converter
A: 67.6 V: 67.6 A-V: -0.001 ct: 0.114 1621/1621 7% 12% 1.0% 0 0
Exiting... (Quit)
I tried switching between many different video out drivers, the only one that plays video normaly is x11, but the image size is very small.
I`m using vesa driver and my video card is
lspci | grep VGA
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV250 If [Radeon 9000] (rev 01)
xorg.conf http://pastebin.com/f314eaaed
Xorg.0.log http://pastebin.com/f570dbcf5
I found a partial solution to mplayer problem in this tread http://bbs.archlinux.org/viewtopic.php?id=60054 where patroclo7 stated, that from this update on, X is using autodetection and doesn`t need xorg.conf anymore.
Anyways I followed the advice deleted my xorg.conf and rebooted arch without xorg.conf. Everything works, even the video in mplayer is running at normal size, however the default screen resolution is a bit to high.
I would like to set it to 1024x768 (monitor, philips 107E5) but don`t have a clue how to change screen resolution without xorg.conf being present. I`m using openbox as a standalone wm.
I still have a backup of my working xorg.conf file, so I can switch between xorg.conf and the other config.
Just for the record, video files are displayed properly using vlc as media player on both described configurations.
To sum everything up, how to set screen resolution at 1024x 768 without xorg.conf being present or how to fix mplayer displaying movies in a very small screen/box, despite running in fullscreen mode (using xorg.conf).
My second problem is regarding urxvt and its borderless. If I set it to true urxvt hangs on start everytime. The terminal is displayed in top left corner of the screen but it`s frozen and can`t be used, while being set to false works like a charm.
Xdefaults
#####Urxvt Config#####
URxvt.termName: rxvt
URxvt.transparent: true
URxvt.inheritPixmap: true
URxvt.imLocale: en_US.utf8
URxvt.scrollBar: false
URxvt.saveLines: 5000
URxvt.urlLauncher: kazehakase
URxvt.cursorBlink: true
URxvt.fading: 15%
URxvt.shading: 50
!URxvt*background: [80]#ece9e2
!URxvt.foreground: [80]#3d352a
urxvt.depth: 24
urxvt*background: rgba:0000/0000/0000/aaaa
urxvt*foreground: rgba:ffff/ffff/ffff/aaaa
URxvt.tintColor: #d9d7d1
URxvt.borderLess: false
!URxvt.InternalBorder: .5
URxvt.externalBorder: .5
URxvt.borderColor: #acacac
######Urxvt Colors######
*foreground: rgba:0000/0000/0000/dddd
*background: rgb:10/10/10
!black
*color0: rgb:20/20/20
*color8: rgb:75/77/73
!red
*color1: rgb:cc/00/00
*color9: rgb:ef/29/29
!green
*color2: rgb:4e/9a/06
*color10: rgb:8a/e2/34
!brown/yellow
*color3: rgb:c4/a0/00
*color11: rgb:fc/e9/4f
!blue
*color4: rgb:34/65/a4
*color12: rgb:72/9f/cf
!magenta
*color5: rgb:75/50/7b
*color13: rgb:ad/7f/a8
!cyan
*color6: rgb:06/98/9a
*color14: rgb:34/e2/e2
!white
*color7: rgb:d3/d7/cf
*color15: rgb:ee/ee/ec
! #####Xterm Config#####
XTerm*background: black
XTerm*foreground: gray
XTerm*highlightColor: orange
######Stjerm Config######
stjerm.key: f12
stjerm.opacity: 50
######Stjerm colors######
stjerm.color0: #202020
stjerm.color1: #cc0000
stjerm.color2: #4e9a06
stjerm.color3: #c4a000
stjerm.color4: #3465a4
stjerm.color5: #75507b
stjerm.color6: #06989a
stjerm.color7: #d3d7cf
stjerm.color8: #757773
stjerm.color9: #ef2929
stjerm.color10: #8ae234
stjerm.color11: #fc394f
stjerm.color12: #729fcf
stjerm.color13: #ad7fa8
stjerm.color14: #34e2e2
stjerm.color15: #eeeeec
######Mouse Cursor Theme######
Xcursor.theme:Neutral_Plus_Inv
Any advice is highly appreciated.
Regards,
bandito
Last edited by bandito (2008-12-05 21:35:11)

The solution for mplayer using xorg.conf file as follows:
To get fullscreen video working just add
zoom = yes
to /.mplayer/config
In case if you are using gui for mplayer and get the following error trying to play a video file
Error opening/initializing the selected video_out (-vo) device
Open /.mplayer/gui.conf and change vo_driver from "xv" to "x11".
Urxvt solution is described here http://bbs.archlinux.org/viewtopic.php?pid=457421 but also check this for explanation http://comments.gmane.org/gmane.comp.wi … enbox/3947
regards
Bandito
Last edited by bandito (2008-12-05 21:34:31)

[solved] sudo and yaourt problems after recent updates

After recent updates (past week) yaourt started giving me problems. When using yaourt it prompts me for sudo password but it does not seem to use my sudo configuration.
I get this:
[sudo] password for root:
[sudo] password for root:
Password:
su: Authentication failure
Password:
When entering mine or root's password I just get prompt again. The last password is for su, which when I enter root's works.
It seems sudo is not using /etc/sudoers configuration either, as I have things like insults enabled and it used to work previously.
Any reason for this?
sudo works fine otherwise.
Last edited by wrm (2014-03-29 23:12:26)

Looks like this: https://github.com/archlinuxfr/yaourt/issues/5
And this: https://bbs.archlinux.org/viewtopic.php?id=178776
Last edited by 2ManyDogs (2014-03-24 21:33:40)

[SOLVED] Bridging and Hostapd problems.

Hello!
I want to let a computer share the network it's connected to via wifi,
I am trying to use hostapd and after following the guide at https://wiki.archlinux.org/index.php/So … cess_Point
i have managed to get the access point up, but when I try to connect to it I get "> DHCP IP lease attempt failed"
Most examples mention dnsmasq, and I have it running with this configuration:
#cat /etc/dnsmasq.conf
interface=wlan0
dhcp-range=192.168.0.2,192.168.0.5,255.255.255.0,12h #
#cat /etc/network.d/bridge
INTERFACE="br0"
CONNECTION="bridge"
DESCRIPTION="Example Bridge connection"
BRIDGE_INTERFACES="eth0"
IP="dhcp"
#cat /etc/conf.d/netcfg
NETWORKS=(bridge)
WIRED_INTERFACE="eth0"
WIRELESS_INTERFACE="wlan0"
#cat /etc/conf.d/
NETWORKS=(bridge)
WIRED_INTERFACE="eth0"
WIRELESS_INTERFACE="wlan0"
#cat /etc/hostapd/hostapd.conf
interface=wlan0
bridge=br0
driver=nl80211
logger_syslog=-1
logger_syslog_level=1
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=test_essid
hw_mode=g
channel=7
beacon_int=100
dtim_period=2
max_num_sta=5
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wmm_enabled=1
wmm_ac_bk_cwmin=4
wmm_ac_bk_cwmax=10
wmm_ac_bk_aifs=7
wmm_ac_bk_txop_limit=0
wmm_ac_bk_acm=0
wmm_ac_be_aifs=3
wmm_ac_be_cwmin=4
wmm_ac_be_cwmax=10
wmm_ac_be_txop_limit=0
wmm_ac_be_acm=0
wmm_ac_vi_aifs=2
wmm_ac_vi_cwmin=3
wmm_ac_vi_cwmax=4
wmm_ac_vi_txop_limit=94
wmm_ac_vi_acm=0
wmm_ac_vo_aifs=2
wmm_ac_vo_cwmin=2
wmm_ac_vo_cwmax=3
wmm_ac_vo_txop_limit=47
wmm_ac_vo_acm=0
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1
wpa=2
wpa_passphrase=XXXXXXXXXXXXX
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
rsn_pairwise=CCMP
This is the output of ifconfig
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.144.0.225 netmask 255.255.252.0 broadcast 10.144.3.255
inet6 fe80::20f:53ff:feb0:2c49 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 0 (Ethernet)
RX packets 263 bytes 29403 (28.7 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 56 bytes 6081 (5.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
ether b8:27:eb:fc:1c:e5 txqueuelen 1000 (Ethernet)
RX packets 8926 bytes 704068 (687.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 658 bytes 139938 (136.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 4 bytes 212 (212.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4 bytes 212 (212.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
mon.wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
unspec 00-0F-53-B0-2C-49-3A-30-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC)
RX packets 47 bytes 3140 (3.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20f:53ff:feb0:2c49 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 247 bytes 32731 (31.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Note that the network I am connecting to is 10.144. and I can ssh into the machine trough this network.
When I connect with a wifi client I want it to get a 10.144. address and be able to interact with the other users
on the network as if it was directly connected to the network. (My main goal is this, but if I can get it working
as a router it's a improvement too)
Thanks for your help!
---EDIT--
I have now tried following this tutorial:
http://sirlagz.net/2012/08/09/how-to-us … er-part-1/
This part works, but when I come to part 2
http://sirlagz.net/2012/08/10/how-to-us … er-part-2/
It has this part that I cannot figure howto convert this to netcfg
iface br0 inet dhcp
bridge_ports eth0 wlan0
pre-up ifconfig eth0 0.0.0.0 up
pre-up ifconfig wlan0 0.0.0.0 up
pre-up brctl addbr br0
pre-up brctl addif br0 eth0
post-down ifconfig wlan0 0.0.0.0 down
post-down ifconfig eth0 0.0.0.0 down
post-down brctl delif br0 eth0
post-down brctl delbr br0
Last edited by Reccra (2012-09-28 09:32:36)

Thanks for your replies, now I have disabled ip forwarding,
the problem with ssh was that it tried to do a dns lookup that failed.
The reason it failed is that it seems like the bridge host (the one with br0) does not seem to be able to connect anywhere except to the client that is connected to it.
I mean:
(10.144.) - (10.144.2.107) - (10.144.0.46)
Net - Bridge - Client,
I can ssh into Bridge from Client, but I send cant anything (Ping/connect etc) from Bridge to Net. Everything works fine from Client to net tough.
[root@Bridge etc]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 10.144.1.1 0.0.0.0 UG 205 0 0 br0
10.144.0.0 0.0.0.0 255.255.252.0 U 205 0 0 br0
[root@Bridge etc]# ss -arpt
State Recv-Q Send-Q Local Address:Port Peer Address:Port
LISTEN 0 0 *:ssh *:* users:(("sshd",267,3))
ESTAB 0 0 10.144.2.107:ssh 10.144.0.46:56351 users:(("sshd",271,3))
ESTAB 0 0 10.144.2.107:ssh 10.144.0.46:56395 users:(("sshd",345,3))
LISTEN 0 0 :::ssh :::* users:(("sshd",267,4))
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.144.2.107 netmask 255.255.252.0 broadcast 10.144.3.255
inet6 fe80::ba27:ebff:fefc:1ce5 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 0 (Ethernet)
RX packets 73020 bytes 6867080 (6.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3130 bytes 800748 (781.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
ether b8:27:eb:fc:1c:e5 txqueuelen 1000 (Ethernet)
RX packets 74579 bytes 9464012 (9.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5060 bytes 818996 (799.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 156 bytes 15830 (15.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 156 bytes 15830 (15.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
mon.wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
unspec 00-0F-53-B0-2C-49-3A-30-00-00-00-00-00-00-00-00 txqueuelen 1000 (UNSPEC)
RX packets 477 bytes 53447 (52.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::20f:53ff:feb0:2c49 prefixlen 64 scopeid 0x20<link>
ether 00:0f:53:b0:2c:49 txqueuelen 1000 (Ethernet)
RX packets 8478 bytes 1086201 (1.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 76359 bytes 12516094 (11.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@Bridge etc]# arp -n
Address HWtype HWaddress Flags Mask Iface
10.144.1.1 (incomplete) br0
10.144.2.162 ether 00:23:5a:28:af:cb C br0
10.144.0.46 ether 00:23:4d:1b:19:b2 C br0
I tried adding the gw manually with arp -s , but this didn't help.
Thanks for your help!

[Solved] LaTeX and LyX problems after recent update

After the recent TeX update, problems arose that were already discussed in another thread, the solution is in a post by bender02. Because I use LyX instead of the "normal" latex command line tool, I was getting the following:
The layout file requested by this document,
scrbook.layout,
is not usable. This is probably because a LaTeX
class or style file required by it is not
available. See the Customization documentation
for more information.
LyX will not be able to produce output.
I am just posting this here to make it easier for others that search for that LyX message to find the solution.

Great jstarek!
That information saved me!
Don't know why the TeX updates break so easily...

[SOLVED] Dwm and slim problem.

i installed dwm and slim in my arch and now i cant go back to the terminal to do changes, it puts me on the log in (slim) and i cant close it, i want to do changes in ~/xinitrc.
Please help me.
Thanks.
Last edited by Iason (2010-09-13 07:47:02)

Alt-F2
If that doesn't work, Alt-F3
If that doesn't work, Alt-F4
If that doesn't work try again but with Ctrl-Alt-F2, etc.
If that doesn't work come back here.
edit: *shakes fist at jasonwryan* *sticks out tongue at thayer*
Last edited by fsckd (2010-09-12 21:47:51)

[Solved] Chromium and WebGL problem with Body Browser

Hi,
I'm having problems running (the wonderful) body browser WebGL demo from google labs, using Chromium 10.0.620.0 (70039).
My graphic card is an intel 4500mhd.
Most WebGL demos works fine, but with this one I get a black (not shaded or textured) 3D model.
I also have a "unable to load libGLESv2.so" warning.
As suggested by someone, I rebuild Mesa package with ABS, adding the flags:
--enable-egl
--enable-gles2
Now WebGL doesn't work at all, libGLESv2 warning is gone, but I get "unable to load st_GL.so"...
Ideas?
Last edited by mr.entropy (2011-02-04 18:02:32)

I tried both versions, with or without --enable-webgl switch (in version 10 webgl seems to be enabled by default).
Webgl in version 8 can be enabled typing about:flags too.
I always get a black 3D model
As I said, other webgl demos works fine.
lagagnon, which is your graphic card?
Last edited by mr.entropy (2010-12-23 21:43:08)

I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

Question
I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
'''(in English)'''

Hi Danny,
Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
but not 180, right?
I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
=COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
or
=SUM(IIF(Fields!TICKET_STATUS=4,1,0))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Critical Irish Update needed to solve black and white tv problem on G20!

I recently had trouble with setting up tv on my Qosmio G20, I was pointed in the direction of a black and white problem that affects earlier models. The solution to the problem was to use the g20's drivers and run 2 reg files.
Having done that to no success i tried every irish combination possible, with still black and white, I then tried UK and got colour.
I mucked about with the registration files and found that in the file, there was no irish setting, So when a user puts ireland in as their location they will always get black and white.
Ireland uses the exact same settings for tv as the UK does, However if a person choses UK they will not get irish guides or irish channels to pick from (ireland isnt part of the uk)
i found the settings for the UK -
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ttv200x\Parameters\44]
@="United Kingdom"
"FreqBoundary"=dword:000493e0
"LB_VideoStandard"=dword:20000080
"LB_AudioStandard"=dword:00020000
"LB_ShiftFreq"=dword:00000abe
"HB_VideoStandard"=dword:20000080
"HB_AudioStandard"=dword:00020000
"HB_ShiftFreq"=dword:00000abe
Figuring the 44, was the dial code for UK (that took a while to figure) i added a registry entry with exactly the same settings, but with ireland and 353 at the top.
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Servic es\ttv200x\Parameters\353]
@="Ireland"
"FreqBoundary"=dword:000493e0
"LB_VideoStandard"=dword:20000080
"LB_AudioStandard"=dword:00020000
"LB_ShiftFreq"=dword:00000abe
"HB_VideoStandard"=dword:20000080
"HB_AudioStandard"=dword:00020000
"HB_ShiftFreq"=dword:00000abe
I now have colour tv under the irish settings in media centre, i also have sound now, where before i didnt. Hopefully the above code will be added to the registry file named ttv2_regdata_20050111.reg that comes as part of the http://support.toshiba-tro.de/kb0/TSB5800V20000R01.htm driver fix for the problem..
thanks to jimi in the following post http://forums.computers.toshiba-europe.com/forums/thread.jspa?forumID=42&threadID=11145 for pointing me in the right direction.
Hope it helps someone..
laters taters...

I can confirm the problem isnt to do with win dvd creator 2 for toshiba. My registry setting was at 0.
Its bascially a known problem that was fixed, however it wasnt fixed for irish people.
When windows wants to play tv it looks in the registry to find out what settings to use. There are no irish ones. Our signal is technically the same as the UK, so using UK settings fixes the problem, However the UK guide doesnt work for irish channels. For the tv to work in colour windows needs the 353 settings.
I think the guy on this thread was having the exact same problem that is fixed with the registry entry.
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2488&tstart=75
This problem will only affect a small amount of users, The fix that comes with the toshiba drivers needs the irish settings added, Then the problem will be solved by updating the drivers.
until then any irish people can fix their black and white tv signal by adding the above registry entrys.
for trouble shooting purposes here is a list of countries where the bug is fixed... If someone complains of black and white tv on the qosmio series, this list can be checked, and if the persons country is absent, it could be the problem. To fix the problem you need to find out their country call code (+353 is ireland, +44 is UK) You also need to know the settings to add, i did this by looking at the UK settings in the file ttv2_regdata_20050111.reg that comes in the "reg" folder that comes for the qosmio tv driver.
here is the list of countries that an update of driver will work for...
"United States"
"Japan"
"Australia"
"Newzealand"
"China"
"Korean"
"United Kingdom"
"German"
"Italia"
"Swiss"
"Netherlands"
"Belguim"
"Luxemburg"
"Spain"
"Portugal"
"Russia"
"Ukraine"
"Azerbaijahn"
"Kazakhstan"
"Saudi Arabia"
"UAE"
"Lebanon"
"Kuwait"
"Egypt"
"Bahrain"
"Qatar"
"Jordan"
"Oman"
"Norway"
"Sweden"
"Denmark"
"Finland"
"Turkey"
"Greece"
"Israel"
"Cyprus"
"Poland"
"Slovakia"
"Czech Republic"
"Hungary"
"South Africa"
"Senegal"
"Mali"
"Kenya"
"Tanzania"
"Romania"
"Slovania"
"Bulgaria"
"Estonia"
"Lithuania"
"Latvia"
"Malta"
"Yugoslavia(Selvia Monteneglo?)"
"Singapore"
"Hong Kong"
"Taiwan"
"Malaysia"
"Thailand"
"India"
"Philippine"
"Indonesia"
hope that helps.

Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

[Solved][Hal and Partitions] Newbie problem with hal policy

Hello everybody,
As a new user of archlinux for less than a week I have experienced a great distribution after having been for 1 year on Linux.
After installation I was able to solve most of my problems with the wiki and the forums but there is one problem I cannot resolve.
I have installed Kde 4.2 on my computer and I can mount Usb drives, or CDs with hal (It is in the daemons section of my rc.conf) but strangely I cannot access my other partitions such as my Ubuntu partition (ext3), or the family's Windows partition (Nfts). I have installed nfts-3g for the nfts partition hal refuses to let me access it, I will give you what Dolphin says when I try to access the Nfts:
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: hal-storage-mount-fixed-extra-options no <-- (actions,result)
And for the ext3
org.freedesktop.Hal.Device.PermissionDeniedByPolicy: hal-storage-mount-fixedauth_admin_keep_always <-- (actions,result)
I don't really understand what It means but normally I am allowed to mount partitions.
My /etc/PolycyKit/PolicyKit.conf: http://pastebin.com/m57e94025
And my /etc/dbus-1/system.d/hal.conf: http://pastebin.com/m62861179
I've already tried to configure these two with the wiki and the forums but nothing yet.
If you need more information ask me.
Thanks in advance.
Last edited by auratux (2009-02-23 21:24:29)

You might want to reread the Hal wiki re: Permission Denied with automounter. Your /etc/PolicyKit/PolicyKit.conf seems to be missing the lines mentioned in the wiki.
Edit: Or maybe it is similair to: http://bbs.archlinux.org/viewtopic.php?id=66008
Last edited by bgc1954 (2009-02-22 14:07:10)

SOLVED Fluxbox and Nitrogen problem

Similar Messages

Maybe you are looking for