[SOLVED] foomatic-rip-hplip and HP laserjet M1212nf MFP printer

I'm trying to install and configure the drivers for the HP laserjet M1212nf MFP printer to work with CUPS over a wired network using the hplip utilities.
I've installed and set up the printer drivers etc using hp-setup and the printer is appearing in the CUPS interface. The problem is that when trying to print a test page
from the cups interface, I'm receiving the message "/usr/lib/cups/filter/foomatic-rip-hplip failed"
Has anyone had any experience with this error? what needs to be done to fix this? this is semi-important as I need my printer for work and school.
SOLVED: okay, so I found several solutions that combined seem to have solved my problems.
1.) remove the printer from cups
2.) instead of using 'hp-setup -i <printer-ip> just use hp-setup -i.
3.) have Hal, Dbus, and Avahi up and running (probably my biggest problem, I didn't have hal or avahi installed, and I didn't have dbus running)
4.) unpause printer
5.) pray
6.) print test page.
these steps worked for me (not necessarily in the above order...)
Last edited by Cyrusm (2011-02-14 03:52:43)

I have problem with my M1212nf MFP.
I can't even setup my printer and I get
hp-setup[20577]: debug: Restarting CUPS...
hp-setup[20577]: debug: Restart CUPS returned: exit=0 output=
hp-setup[20577]: debug: addPrinter('HP_LaserJet_Professional_M1212nf_MFP', 'hp:/net/HP_LaserJet_Professional_M1212nf_MFP?zc=NPI8FD5F0', '', '', 'lsb/usr/HP/hp-laserjet_professional_m1212nf_mfp-hpijs.ppd.gz', '')
hp-setup[20577]: debug: addPrinter() returned (0, Unable to connect to CUPS server)
I'm very frustrated. I'm running all the mentioned daemons but no luck.

Similar Messages

HP LaserJet M1212nf MFP Printer - Communication Failure with the scanner

Dear all,
May I kindly ask if there are any known resolutions in terms of a scanning issue with the HP LaserJet M1212nf MFP Printer?
When it starts scanning the printer only scans the up to the 3rd or 4th page, it stops in the middle of the sheet and produces an error message stating the following: Communication Failure with the scanner.
Are there any steps that may be followed in order to resolve the incident?
Many thanks in advance.
Best regards,
Ryan

Hi @Ryan_HP ,
I see that you are experiencing a communication error during scanning of multiple pages. I would like to help, but I will need some more information to provide you with the correct steps to resolve this issue.
If you are using Windows, download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
Temporarily turn off any Antivirus Software, just to rule out any interference.
Try scanning again.
What operating system are you using?
How to Find the Windows Edition and Version on Your Computer.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
How is the printer connected? (USB/Ethernet)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
What scanning software are you using?
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Installed LaserJet M1212nf MFP on new computer. Prints but wont scan.

I just installed Laser Jet M1212nf MFP printer on a new computer. It installed itself and prints fine. It wouldnt scan so I downloaded the software from the HP website. It still doesnt scan. I don't know what to do next. My computer doesnt pick up the fact that there is a new scanner.

Solved my own problem. the name of the laserjet showed up as 1210 instead of 1212 on my computer. It still isnt working properly, but at least the new computer recognzes the printer. Onto the next problem..

Airprint to HP LaserJet M1212nf MFP from Windows

Hi!
I have a HP LaserJet M1212nf MFP, and connected it to the network via Ethernet, and was elated when I saw that I could Airprint (wirelessly) from all 3 iPhones and the iPad in the family!
I was not very elated when my 3 windows printers can only ePrint by using attached docs to emails, and then only certain formats. I would expect this lack of funtionality from an Apple specific printer, but not from an HP printer!
Through Googleing I saw what I thought was the answer: To fool my PC into thinking it can (wirelessly) print to an airprinter through the network, but nothing panned out as being that...
Really disappointed in HP this time. Any suggestions?
Thanks in advance
Joe

Hello Joe_In_Missouri,
Thank you for being an active member of the HP Support community. I understand that you were having issues printing wirelessly from you Windows computers to your Laserjet M1212nf.
I see you have received a solution on how to do this on another thread. If you need the link again you can find the solution here.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Sti Error! Video initialize error on HP LaserJet M1212nf MFP

I'm using HP LaserJet M1212nf MFP all in one printer on Windows 7 32bit. When i try to scan a document it gives me an error message Sti Error! Video initialize error on my coputer screen. I have re-installed the printer drivers but the problem still persists. I have also used HP Print and Scan Doctor and restarting the device from power cable, this also did not work. I connected it to another computer with windows 7 64bit and it worked perfectly.
There is however no issue copying or printing only when I try to scan.
PLEASE HELP!!!

Hi @SoStoked ,
I see that you are having issues scanning on the one computer. You are getting the error "Sti Error! Video initialize error".
I would like to help.
It sounds like you are having issues with your operating system.
Did you add any new software or hardware to the computer?
Try scanning with a 300 DPI and saving it as a JPEG, to see if you have the same results.
Try scanning from Paint to see if you get the same error.
What size are you scanning? (DPI)
How are you saving the scan? (PDF, JPEG)
I believe that the error might be a issue with your video card drivers. Update the drivers to see if that will help.
Update the JavaScript and DirectX on the computer.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, did everything have a green check mark, any error messages)
What applications have you tried to scan from?
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro M1212nf MFP Printer Duplex Printing Driver

Hello,
I'm consdering about buying HP Laser Jet Pro M1212nf MFP Printer.
I feel like it's the printer that has all the specs that I need.... Except for automatic duplex printing.
Automatic duplex printing is super important to me and I'm sad that the M1212nf does not provide it.
However, I did see that it has duplex printing driver support.
I was wondering what this driver support is (I've been spending hours on the web trying to get a definition but nothing!)
and if it will work on a Mac, I saw couple threads that said that some HP printers don't offer duplex printing driver support for mac computers.
So basilally, I'm wondering how the duplex printing will work if I install the driver support.
Thanks.

Good health! I wanted to download drivers for hp laserjet m1212nf mfp. Does not work, can you help me where to download or buy the drivers, I have lost the native disk driver, now cannot install the printer! thank you! if the error my message I will forgive apologize in advance

HP laserjet m1536dnf mfp print and scan is very slow

Hi Sir/Madam,
HP laserjet m1536dnf mfp print and scan is printing and scanning slow on network. Sometimes scan is not work. That's why I have to reinstall the printer driver. So how to increase print speed?
Thanks in advance,

Hi riz1_4444,
Welcome to the HP Forums, I hope you enjoy your experience!
I understand the printer is printing and scanning slow on the network.
I will be happy to help you.
Make sure printer is connected directly to a wall outlet.
Try printing a hardware test on the printer to see if it prints slow or not.
Printing a Configuration Report. Select Method one: Print a Configuration Report from the printer control panel.
I would restart the router to see if this will resolve the issue.
Try another Ethernet cable.
If you are still having issue then test the printer by connecting the printer to the computer by a USB cable to see if it is something on the network that is causing it to slow down.
Hope this resolves your issue for printing slow over the network.
Thank you for posting on the HP Forums.
Have a wonderful day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Im using HP laserjet M1120N MFP printer and its required WIA driver.

hi,
im using HP laserjet M1120N MFP printer.
last time i dont have any issues to printer or scan, and lately i cant scan
and only able to print out.
its required me have WIA driver. anyone know how to fix its.
thanks

Hello zuzack97,
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HOW TO SCAN ON LASERJET M1212NF MFP

I HAVE AN HP LASERJET M1212NF MFP. CAN YOU PLEASE TELL ME WHAT TO DO IN ORDER TO SCAN A DOCUMENT. I HAVE DONE THIS IN THE PAST, BUT IT'S BEEN A LONG TIME AND I CANNOT FIND MY USERS MANUAL. THANK YOU VERY, VERY MUCH FOR YOUR HELP

Hi,
You may scan using the Scan To software, available under All Apps within the Windows 8 Start Screen.
You may find a step by step instructions about how to scan with HP software in the followig link:
http://support.hp.com/us-en/product/HP-LaserJet-M1200-Multifunction-Printer-series/3965847/model/396...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can I make my HP laserjet m1522nf mfp printing wirelessly?

I have this non-wireless hp laserjet m1522nf mfp printer at home. I have two laptops and am using FiOS wireless router for wireless internet access. I also have a Rosewill wireless router. It is not a printer server, just a regular wireless router. Now I use an enthernet cable connecting printer to Rosewill wireless router. Can I print from my laptops? If yes, how can I set it up?
I know I can either buy a wireless printer server, or a wireless adaptor or use one of the laptop as printer server to make this work. But I want to try laptop + Rosewill wireless router + HP printer route.
Thanks in advance,
-J. Z.

Hi,
Based on its specs, it has:
Connectivity, standard
10/100Base-T Ethernet network port, Hi-Speed USB 2.0 compatible port.
Connectivity, optional
None
You may be able to connect it to a wireless rounter and config it on the same wireless network then you can print wirelessly.
Please use the following book (page #13) to set it up.
http://h10032.www1.hp.com/ctg/Manual/c00389927.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP Color laserJet CM1015 MFP printing problem

Till now my HP Color laserJet CM1015 MFP printer was working perfectly and suddenly prints miss aligned colors. Each color prints a little bit below another. I uninstalled printer’s software and reinstalled again but it didn’t help. There is no error messages. Printer’s alignment didn’t help either. Can anyone help me with this problem?
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Yes I solved the problem. I had to clean the registry of all information regarding this printer. During the installation I noticed interesting thing. The only installation that worked well was from the CD that came with the printer. I've tried downloaded latest version but it didn't install properly and have no idea why.
Inkjet and Laser Printer Supplies
Printer Cartridge Recycling
http://www.cartridgeshop.com.au

Scan in a PDF format in HP laserjet M1319f MFP printer

How to scan in a PDF format when the scanner is not showing that option in HP laserjet M1319f MFP printer when it has been installed in a new HP computer with Windows8pro operating system downloading it from HP website ad the Cd that came with the printer did not support this operating system

Hello yagnya31,
Welcome to the HP Support Forums!
I see you are trying to install and scan with the HP LaserJet M1319f MFP, but are not getting a .PDF option. Printing and scanning with the Windows 8 Operating System is described as basic. The .PDF file type should be available regardless, of the software being basic or full feature. Take a look at this HP document: How to Scan: Windows 8 to learn about the different ways to scan.
See if those methods of scanning gives you the .PDF file type.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Alternate driver for LaserJet Pro MFP printer

Can anyone suggest an alternate driver for a Mac Mini (OS X v10.4.11) to print on a LaserJet PRO MFP M127fw ?
This question was solved.
View Solution.

Hi @suckerfish1,
I understand that you are looking for drivers for the 10.4 to use with the LaserJet PRO MFP M127fw. I can help you with this.
Unfortunately 10.4, isn't a supported operating system, there are no drivers available.
Here are the Supported Mac OS X operating systems: Mac OS X v10.6 Snow Leopard, OS X v10.7 Lion, OS X v10.8 Mountain Lion.
HP LaserJet Pro MFP M127fw and Color LaserJet Pro MFP M177fw Printers Product Specifications.
You would have to upgrade to 10.6 or get another Laserjet that supports 10.4.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine.

HP Color Laserjet CM1015 MFP prints colors looking like 3D while single colors print fine. I have tried several calibrations with no change. I have reset printer to factory default with no success.

Hi AFace; hope you are doing well and sorry to hear that you are having this issue.
Your HP Color Laserjet CM1015 MFP is a commercial product. I will suggest posting and looking in the forum for HP Business Support for a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Thanks;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

What is the pass phrase on my new HP Laserjet 1536dnf MFP printer ?

what is the pass phrase on my new HP Laserjet 1536dnf MFP printer ?

LedmanCanada,
Content removed - question already answered.
Click the Kudos Thumbs-Up to show appreciation and say Thanks.
Although I strive to reflect HP's best practices, I do not work for HP.
Kind Regards,
Dragon-Fur

[SOLVED] foomatic-rip-hplip and HP laserjet M1212nf MFP printer

Similar Messages

Maybe you are looking for