[SOLVED]Formatting the USB after using DD

Hi, I can't format the USB after using DD, but it doesn't work. I zeroed the partition like written in the wiki, but when I try to make the fs it says that the partition doesn't exist. The system doesn't recognize the USB at all. I used the windows version of DD
Last edited by ChessArcher (2014-02-08 18:07:43)

ChessArcher wrote:Hi, I can't format the USB after using DD, but it doesn't work. I zeroed the partition like written in the wiki, but when I try to make the fs it says that the partition doesn't exist. The system doesn't recognize the USB at all. I used the windows version of DD
You need to partition it; why would you use the windows version of anything?

Similar Messages

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

After ejecting a disk plugged into the USB port using Finder, I am now getting "The disk was not properly ejected" message. This didn't used to happen. How can this be corrected?

When you right (control) click on the disk and click eject "disk name", do you pull it immeadiatly or wait a few seconds for it to unmount? Try waiting and see if you get the same message. If you do, when the disk is connected go to applications/utilities/disk utility, after opening DU, select the volume in question from the left side bar and try a permissions repair, you may also run verify disk and see if it comes up with any errors (they will be in red)

Is it okay to closed the lid after using Macbook Pro even the it is hot?

Hi. I'm using MBP early 2011 I5 and I noticed the temperature getting high and palm rest is getting hot/warm when I'm playing games. Is this normal? temperature around 80 degree celsius accoringding to istat.
Also, after using the MBP, ofcourse the palm rest is hot/warm. Is it okay to close the lid after using it?
Thanks.

My practice has been to let the MBP cool a few minutes before closing the lid, so it's trapping less heat. I doubt this has much saving effect on the logic board components, but my MBP is old enough to have a glossyplastic display cover. It would look ugly if it started to warp.

Am I need to Eliminate the object after used??

Am I need to Eliminate the object after used to release the resource ? Which like C code: free(Dynamic variable). And why and how they works in java??
Thank alot !!!

You may want to read about garbage collection in java. Basic intro in [url http://java.sun.com/docs/books/tutorial/java/data/garbagecollection.html]tutorial, after that search around the site for garbage collection and related topics
Mike

HT5260 iphoto only shows photo with 5 stars in the event after using aperture

iphoto only shows photo with 5 stars in the event after using aperture...
help

Thanks for your response again.
and this happen to every single folder in iphoto.

My iPhone 4S is becoming too hot on the back after using apps

My phone 4s is becoming too hot on the back after using apps and browsing over the net

Apple actually recommended that at least once a month What I've noticed in the iPhones and iPods that when you drain it to 0%, it saves some energy to display that connect to AC source. That's what you get when you turn on your phone or ipod even if it's 0%. That WILL destroy the battery but full cycling wouldn't.
I tried it and it worked thanks but after a day it will be glitchy again :l

Format the USB drive as single FAT partition.

iam trying to re install or atleast update my microsoft office and ginp on my early 2011 mac book pro and says i have to format the usb drive to single fat partition when iam starting the boot camp assistant

Doesn't this erase all information on the disk? I have existing data on that disk that I require. I get the message "Erasing a disk deletes all data on all its partitions"

Lightroom 4.3 craches when using the brush after using redeye tool

I have purchased Lightroom couple of days ago. I was travelling therefore I didn't have the time to upgrade to 4.3.
The version shipped with the disk (4.1) was working like a dream. I have downloaded 4.3 yesterday and I couldn't be sadder. First I noticed that it cause the 'root' to use more CPU, meaning it doesn't use the CPU for Lightroom itself. Plus the the Application is generally and noticeably slower than original one.
Today, I used the redeye tool for the first time, and I just can't brush on top of it without having it crashes!! It's just impossible. I rebooted. Updated my Mac to OS 10.7.5 ... No use. I even uninstalled and reinstalled again. I was forced to do all my editing first in cluding usinf the brush, then use the redeye tool as the final step. But any moment I engage the brush after having used the red eye tool, it crashes instantaneously

I suppose so. But the thing is that 4.2 runs just fine.
But here you go:
Processor 2.53 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB
A bit oldish but I think it's fine (is that what you meant by set up? cuz I'm not entirely sure)
I used the CD to install the first version 4.1 and just followed the instructions and that's what I do every time there's an update/upgrade.
The catalog was suggested by the instructions to be put in the pictures file, so I did. and the images are there too. The other "technical" files that are related to how the software operates are located in the main Preferences folder (where all similar folders from other software are normally located"
Thank you so much for taking the time to look at it. Do let me know if you have any other questions
Cheers

How to select the particles after using the Particle Analysis

Can I select the particles after the particle analysis directly, like chosing #1, #2 ..., or should I run the particle filter using the measured parameter?

Hello Ishi,
I now have a much better idea on what you are trying to do. If you run the IMAQ Particle Analysis Report VI on the thresholded image that contains particles, an array of clusters will be returned that will contain specific information for each particle including the area, number of holes, bounding rectangle coordinates, center of mass, orientation, and dimensions.
To find out which particle is which in the image, index the Particle Reports (Pixels) output of this VI, unbundle the cluster to extract the Bounding Rectangle cluster, and then pass it to the Rectangle input of an IMAQ Overlay Rectangle VI. This VI will overlay a bounding rectangle onto the image to show where the particle is located. You can specify which particle you want highlighted by changing the array index of the Index Array VI that is responsible for extracting a specific cluster of particle information from the Particle Reports output of the IMAQ Particle Analysis Report VI.
Regards,
Mike T
National Instruments

Safari loads and the crashes after using Private Browsing

I am finding that Safari won't load after using private browsing. After switching off private browsing, I load Safari but as soon as it appears on the screen, it crashes. No matter how many times I start it up, it will always disappera.
The only way to fix it is to shut down and then start up the iPad again.
Anyone know why this is happening?

If you search the discussion site, you will find a number of threads regarding crashing issues with Safari since the iOS 5 update. It seems to be more prevalent in the iPad 1 - which I have and I experience crashes as well - but I have seen no definitive solution.
I have read that from some users that you should turn off bookmark syncing with iCloud, turn off private browsing, restart the iPad .... but nothing I have tried has eliminated the problem.
For now, it seems to be - whatever works for you is the "fix" until it really gets fixed.

How can I limit the fonts in the Character Map (charmap) and reinitialize the state after use?

In a WPF application I have a RichTextBox in which users will be inserting text. I also must give the user the ability to insert characters. To do so I have called up charmap.exe using
Process charProcess = new Process();
ProcessStartInfo startInfo = new ProcessStartInfo();
charProcess.StartInfo.FileName = strCharmap;
charProcess.Start();
etc., and it works fine. There are several problems I have basically with charmap, however, not with WPF. The first is that because of the subsequent use of the user’s insertion in the RTB, I must restrict the font to “Ariel Unicode
MS.” So far all I have been able to do is instruct and warn the user not to change fonts and
change back any font change that occurs as a result of use of “Advanced view” features.
Question number one is, how can I restrict the fonts loaded into charmap to this one font? The second problem is that if another font is called up, or the “Advanced view” state of charmap is closed, or a “Group by” feature is opened, these choices will
be retained for the next user that opens charmap. How can I initialize the state of charmap for each new user with the correct font and “Advanced view” features showing. It is said,but in old posts, that reinitialization occurs for all but administrative users,
but this seems to be no longer true. I have tried permission changes in charmap’s Properties, but I can’t get the necessary reinitialization to occur even if user’s don’t have modify permission. Can one use a .ini file, or the .mui file, or make Registry changes
to accomplish my goals. There seems to be a warning in the .mui file about changing fonts, but is it cancelled? I am using Windows 7 and C#.
I have looked at other character maps but they are either too complicated for the casual user, or they have no search engine and advanced features, or they have the same problems.
I am pretty much a novice with respect to the Windows files use and WPF, so please be fairly clear, complete, and prescriptive in your answer. Also so that I and others can learn, it would be nice to have an explanation of why one does whatever you suggest.
Your help is appreciated.

Hi,
Thanks for your post!
According to your description, I am afraid your problem is out of support in C#language forum. So i move your thread to off-topic forum!
Best Wishes!
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to "Mark as Answer" the responses that resolved your issue. It is a common way to recognize those who have helped you, and
makes it easier for other visitors to find the resolution later.

Not able to un lock the pernr after using HR_MAINTAIN_MASTERDATA

Hi,
We using HR_MAINTAIN_MASTERDATA to create new employee.its working fine, we need to create A008 relation then we try to unlock the employee id using HR_EMPLOYEE_DEQUEUE not able to unlock.Ii tried all the other Function modules used for unlock the employee ,but no luck, any one has faced same issue, please let me any thing can done to unlock the employee.
Thanks
Gopal

HI,
Got to t-code :SM12 give the your user name and click on list (icon).
Select all the enteries and click on delete..
For Master DATa.
Go to pa30 -select Infotype -0003 and click on change and Remove the Tick mark for the filed PERS.NO.Locked
All the best.

My iPod Classic has decided to fill up my music files,and I can't format the disc after restoration. How do I get it operable again?

I can't format the disc, and iTunes says I may have a corrupted iPod. The system has been restored. What do I do to get my disc space back?All the iPod is doing now is constantly syncing things. I have the latest version of iTunes. It is a 160 Gb system.

I also had about 80 gigs of space left when the iPod decided to fill up my music files, somehow.

TS2771 Ipods no longer connect via USB after using a USB 3.0 for the first time

After trying to connect my Ipod Nano (2nd gen) and Ipod touch to my new computer that has USB 3.0 they both will no longer connect to anything via USB (ipod docks). Is this problem fixable? They still play music via the heaphones.

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

[SOLVED]urxvt can't set the background after using slim as DM

Yesterday, I changed lxdm to slim,and then everything went well,except urxvt.Though I think this should have nothing to do with the urxvt's problem.
urxvt only has a white background while my setting is 0000/0000/0000/cccc,even I attempted to comment all options relating to colors,but it doesn't work.until I remove the .Xresources file, urxvt has a black background.
I also attempted to start from startx and other ways, but it didn't work.I have a transparent black interface before,and now it is dazzling white.how could i can resume it.
My DE is kde4.
Here is my .xinitrc
export GTK_IM_MOUDLE=fcitx
export QT_IM_MOUDLE=fcitx
export XMODIFIERS=@im=fcitx
exec startkde
.Xresources
! RXVT-unicode setting
URxvt.tansparent: true
URxvt.geometry: 80x36+80+80
URxvt.background: rgba:0000/0000/0000/cccc
URxvt.depth:32
URxvt.foreground: blue
URxvt.scrollBar: False
URxvt.scrollstyle: next
! Use shift+pageup/down to scroll in screen
URxvt.secondaryScroll: True
!set the artificial transparency of the v.t.
URxvt.inheritPixmap: True
URxvt.tintColor: grey
URxvt.shading: 500
URxvt.saveLines: 1500
URxvt.preeditType: Root
URxvt.borderLess: False
URxvt.font:xft:monofur:pixelsize=17:style=Regular:antialias=true,xft:SimHei:pixelsize=17:style=Regular
URxvt.boldFont:xft:DejaVu Sans Mono:pixelsize=17:style=Bold:antialias=true,xft:DejaVu Sans Mono:pixelsize=17:style=Bold
!redefine color to use tango theme in vim
!Black
URxvt.color0: #000000
URxvt.color8: #555753
!Red
URxvt.color1: #CC0000
URxvt.color9: #EF2929
!Green
URxvt.color2: #4E9A06
URxvt.color10: #8AE234
!Yellow
URxvt.color3: #C4A000
URxvt.color11: #FCE94F
!Blue
URxvt.color4: #3465A4
URxvt.color12: #729FCF
!Magenta
URxvt.color5: #75507B
URxvt.color13: #AD7FA8
!Cyan
URxvt.color6: #06989A
URxvt.color14: #34E2E2
!White
URxvt.color7: #D3D7CF
URxvt.color15: #EEEEEC
/etc/slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
# hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
#login_cmd exec /bin/bash -login ~/.xinitrc %session
login_cmd exec /usr/bin/zsh ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Set directory that contains the xsessions.
# slim reads xsesion from this directory, and be able to select.
sessiondir /usr/share/xsessions/
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user ssfdust
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
#current_theme default
current_theme parallel-dimensions
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log
Thx in advance
Last edited by ssfdust (2013-11-16 05:12:29)

To add to what sonoran posted above, you need to have xrdb load the settings in your ~/.Xresources. When you use a DE, there are quite a few things that it might do for you depending on the existence (or absence) of a give configuration file.
I have no idea what things are specific to each DE, but I know that the Slim login manager is extremely simple and lightweight and does very little (if anything) automagically for you. A good example of automagic coming from some of the display manager part of things is the locale settings. In particular, they implement their own ways of handling setting your keyboard layout and language. So going if you were to go from GDM to Slim, you would suddenly have the stuff in /etc/X11/xorg.conf.d honored, whereas in GDM, you would either have to use gconf or use setxkbmap at some point.

[SOLVED]Formatting the USB after using DD

Similar Messages

Maybe you are looking for