[SOLVED] Front audio panel still not working on K9N Neo V3

I already posted on this here: https://forum-en.msi.com/index.php?topic=113813.0.
I still didn't get front audio panel to work on MSI K9N Neo V3.
Even with my new case; Sharkoon Revenge, it is not working. It wasn't working on my previous noname case too. However, front audio panel on my previous case was working on several other MBs except on this MSI K9N.
Now, I'm using the latest Realtek HD audio driver. I think it's from February '08. Just as with the driver dowloaded by Vista via Windows Update, anything plugged in front audio panel isn't recognized. In this new version of Realtek driver I can't find this Disable front audio panel option so I can't tell if it is checked or not.
Once more, there is not much to do wrong while connecting. Case front audio panel cabel is the same as on all other cases I've ever seen/had. It's a cable with the same number and position of pins as in all other cases. It fits fine on MSI K9N Neo V3. Rear audio panel is working fine.
Any solution to this!?

Quote from: Jack the Newbie on 07-April-08, 03:25:15
From what I can see from the Sharkoon product page, the front panel connectors of your case are not compliant with the Intel HD Audio Pin Standard.
Do you have a manual for your case that includes Pin/wire definitions for the front audio connectors?
No. There was no manual in package. I never thought I will need one either.
Here is Sharkoon Rebel Pin Assigment; http://img176.imageshack.us/img176/9729/pinslk2.jpg
Quote from: Jack the Newbie on 07-April-08, 03:25:15
Have you tried disabling automatic front panel jack detection in the Realtek HD Audio configuration utility? If you don't know were to find that option, access the tab labeled "Audio I/O" and click on the tool icon.
Yes, I tried disabling it. Two tabs (front audio out and front mic) appeared but none of it works.
Quote from: HenryW on 07-April-08, 03:35:46
From something I read: You can also physically check the audio cable of the front panel audio solution. If there is a cable connected to Pin 4, you have an HD Audio module; if there is no cable to Pin 4, you have an AC97 module.
I don't really understand this. Could you please check this on Pin Assignment scan I uploaded above!?

Similar Messages

Front panel audio jack is not working on K9N Neo V2

My front panel audio jack is not working on K9N Neo V2. I check the JAUD1 cable and it appears to be connected to the front panel audio jack. My soundcard driver cannot detect any gadgets when I plug it in the front panel. My audio drivers and BIOS are up to date. Is there any known solution to this? My computer is only a few months old and I have not tried the front audio jack until recently. I'm on Vista home premium btw.
Also, I've got another problem, my processor is AMD 64x2 4400+ overclocked to 2.63Ghz. I've been using that clock value ever since I built this computer and stress tested the processor and found that it would not cause any problems like hanging or overheating. However, I recently decided the need for AMD's Cool & Quiet technology and enabled it. It caused BSODs every few days or per week that didn't happen before. I tried it with the default clock value and it still causes BSODs. Can someone help me?

Quote
Thanks. Its ironic that disabling it actually enables it.
It has to day with the front panel audio wiring of your case. How many wires are there that can be connected to the board's pin header?
Quote
Sound quality isn't very good
Can you be more descriptive? Is the quality better if you plug the headphone into one of the jack at the back panel? (Also, make sure you tell the Realtek HD Audio Manager, that a headphone is connected (and not regular speakers).

Front audio panel not working on K9N Neo V3

A new problem with MSI K9N Neo V3 MB...
I just found out that Front audio panel is not working (no mic, no line out). I checked the cable 3 times. Seems to be OK. Front panel was working on a previous ASUS motherboard.
- All drivers according to vista are working fine.
- Back panel sound (eveything) is working fine.
- Sound panel says that front panel mic & line-out are not plugged in.
Is there a switch to turn this on? Or maybe some special driver?
Or it is just useless, and working on MB package advertisment only?

Quote from: Richard on 13-January-08, 06:50:13
P.S. Just a thought, I could go get a Ouija Board or Dart Board if you prefer. Might yield some answers.
You sure are funny. No doubt about that.
I do appreciate a good laugh, but in this case laughter won't solve my problem.
This little analogy with a car and a tire is just ridiculous. You know, tire is flat or it is not. Or is it maybe flat only on BMW cars?
I see no purpose in describing cables here, but if this is what would make you happy... It happens that I have few spare mintues, so here we go.
chapter 1. - The Case
I do not know what brand is my case. It's a cheap case with expensive Corsair 550W PSU. Very well cooled. I also don't know what is its name, so let us just call it George.
Here is George roaring on my desk;
Chapter 2. - Jimmy & Gina
This is an unknown brand, no name Front panel cable so let's just call it One eyed Jimmy;
This is local one tooth missing whore called Gina;
Chapter 3. - Encounter 1
Jimmy fills Gina just right. It's very tight but just right;
Chapter 4. - Berta, Gertruda and Mike
Dirty Twins Berta and Gertruda are ready to recieve some massive waves;
Big Mike is ready to give:
Chapter 5. - Encounter 2
It fits right again:
Chapter 6. - Oh NO!!!
It's not working on MSI AGAIN:

[SOLVED] HDMI audio - "alsactl restore" not working

I can't seem to get audio through HDMI working properly.
I was able to get it a few weeks ago, on Debian Jessie by doing the following:
Creating ~/.asoundrc with the following contents:
pcm.!default {
type hw
card 0
device 3
running "alsactl restore"
I got this from https://bbs.archlinux.org/viewtopic.php?id=132641
When I run "alsactl restore" now, on Arch, I get the following output:
alsactl: state_lock:114: file /var/lib/alsa/asound.state lock error: File exists
alsactl: load_state:1677: Cannot open /var/lib/alsa/asound.state for reading: File exists
Found hardware: "HDA-Intel" "Intel PantherPoint HDMI" "HDA:14f1506e,10280569,00100003 HDA:80862806,80860101,00100000" "0x1028" "0x0569"
Hardware is initialized using a generic method
Audio continues playing on my laptop speakers, not on my TV.
I tried renaming "/var/lib/alsa/asound.state" and then running "alsactl restore", but I got the same error (even though the file no longer exists!).
Running "aplay -D plughw:0,3 /usr/share/sounds/alsa/Front_Center.wav" does give me sound on my TV speakers through HDMI.
Any ideas?
Last edited by z894 (2014-07-31 03:46:36)

What exactly are you trying to achieve? Do you want to switch between laptop speakers and hdmi? Type hw is not recommended and you are using it directly, which means if the format does not match it will not accept it, s a plug between would make sense.
Alsa wiki wrote:Simply setting a type hw as default card is equivalent to addressing hardware directly, which leaves the device unavailable to other applications. This method is only recommended if it is a part of a more sophisticated setup ~/.asoundrc or if user deliberately wants to address sound card directly (digital output through eic958 or dedicated music server for example).
You could send sound two both cards and then toggle mute between them. See multi plugin for this. It could be problematic though.
I also fail to see what 'alsactl restore' is supposed to achieve here, since it restores the previous settings for ~a[lsa]mixer, you would have to store the appropriate settings first with 'alsactl store' [in multiple files]. Switching between configurations should be easier.

Front panel sound not working

Front panel sound not working* Hello everyone,
I've just bought a PCI Express X-Fi Titanium. So far everything works great with my 5. sound system, but I have problems with my front panel audio.
My case only supports AC97 front panel audio, but has all individual connectors (so 7 single connectors, not one with 0 pins).
I've already tried only connecting 5 pins (the two AC97 return pins unconnected) and connecting all 7 pins. In both ways the microphone works, but sadly not the headphone output. I also tried changing the two options in the driver but that changed nothing.
I did some Google searching and found many reports where the sound itself works with an AC97 front panel on an HD soundcard, just no jack detection.
Any ideas why that isn't working for me?

! Try here for pinouts of your jacks. I have a Cooler Master case that has AC97 and INTEL HD front panel jacks, but here is the kicker. The AC97 jacks come from the front panel first and then about fi've inches from this jack is an INTEL HD jack. A few wires are changed but perhaps these will help...
http://www.intel.com/support/motherboards/desktop/sb/CS-0585.htm
Cheers,
Jerry Macguire

My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing.

My Siri and microphone in other apps hasn't been working lately. I've cleaned the mics, took off te case, and it's still not working. My camera only picks up audio when it's off of vibrate. And now I can't answer texts with the new pull down thing. please help

Hello Sarahd200037,
Thanks for using Apple Support Communities.
To troubleshoot the microphone on your iPhone please follow the steps in the article linked to below.
iPhone: Microphone issues
Take care,
Alex H.

I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

I can't send out email using my iPhone4. I tried to follow the step provided to solve but still not working. What should I do?

Contact your mail provider and get the CORRECT settings for the outgoing server to set up on your phone.

Beats Audio Control Panel software not working after Windows 10 upgrade.

Beats Audio Control Panel software not working after Windows 10 upgrade. the Beats sound enhancement is useless in WIndows 10. When opening the Windows 10 sound properties I'm getting this box message: Auido enhancement problem Windows has detected the audio enhancement for the following device are causing problems: Speakers / Headphones (IDT High Definition Audio Codec) Woud you like to disable driver enhancement for this device? IDT High Definition Audio CodecBeats Audio Control Panel version6.10.6491.02013.11.2009:43:18 Please provide some kind of fix for this?

Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.

P6N Sli Platinum front audio panel and CPU temp voltage issues

Hi All,
I got my P6N Sli Platinum yesterday, build up my computer without any major issues. However I have noticed that my audio front panel does not work. It could not detect my microphone when i plug it into front auido panel, it works fine for the rear auido panel though.
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
Finally, any tips to max the overclock potential of this board? I have overclocked to 3.1g but there are some crashes. Going higher the board just won't boot up. I read a review on anandtech.com says 1.22 bios is good for oc. Where can i download that? I only found 1.1 bios on official site.
Any reply will be appreciated.
Cheers

Quote
Another issues is I highly doubt the accuracy of CPU temp sensor. Msi 's software monitor reports my CPU temp is around 19-20 degree, I know that's too good to be true even I am using a water cooling system. Btw my cpu is E6600. Anyone else has the similar issues?
C2D-CPUs have a digital internal sensor to monitor CPU Core temperatures. Have a look at those with Core Temp ( http://www.thecoolest.zerobrains.com/CoreTemp/ ). This Tool reads the temperature data directly from the register of your CPU. There is nothing wrong with the sensor. It is rather the MSI tool that does not read the data it provides correctly.
Quote
The third, I notice my CPU voltage is bouncing between 1.1 to 1.24 in CPU-z. And the multiplier is changing from 6 to 9, frequency is changing from 1.6g to 2.4g. I only see this in CPU-z. Msi 's own software reports CPU running at 2.4g though. Is this cpuz issue or something else?
There is no issue. What CPU-Z allows you to see there is the C1E-feature of your CPU at work. When there is nothing to do your processor will automatically reduce Core Voltages and frequency to save power and keep temperatures down. As soon as the work load increases the multiplier is set back to x9 and core voltages increase dynamically. It is meant to be a good thing.
I have overclocked my system a little and I like that the C1E feature is still working at this speed setting CPU frequency to 2GHz and core voltage to 1.144v when my system is idle.
If you have problems with this feature you can turn it off in BIOS. The option is labeled as "C1E Support" and might be hidden somewhere. You may be able to hit "F4" to unhide it.
The MSI utilities are not the best tools to monitor your system. CPU-Z, Core Temp, Everest, Speedfan, Memset, Rightmark Memory Analyzer for example do a far better job.

Bluetooth Driver for dell(Inspiron N5110(ST: 3v82np1 ) is still not working well.

Hi,
I have tried installing "Dell Wireless 1701
802.11 b/g/n, Bluetooth v3.0+HS Driver "
But I saw neither wireless nor Bluetooth was defined.
As the drivers listed below are only the driver for wireless and bluetooth, I almost tried all of them, except the last three.
File TitleImportanceRelease DateVersionActions
Intel Centrino Wireless-N 1030 WiFi Driver
(Driver)
Other Formats
Description
Intel 6230/N1030/N1000 WiFi Driver for win7 64-bit This package provides the driver for the Intel Centrino Wireless-N 1030 WiFi Driver and imore…
Intel Centrino Wireless-N 1030/Advanced-N 6230
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Wireless-N 1030/Advanced-N 6230 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS
Driver
(Driver)
Description
This package provides the Dell Wireless 1701 802.11 b/g/n, Bluetooth v3.0+HS Driver and is supported on Inspiron N5110 and Vostro Notebook 3more…
Dell Wireless 1702 WiFi + Bluetooth Driver
(Driver)
s
Description
This package provides the Dell Wireless 1702 802.11 b/g/n, Bluetooth 3.0+HS Driver and is supported on Inspiron and Vostro Notebook models tmore…
Intel Centrino Wireless-N 1000, Centrino Advanced-N
6230, Centrino Wireless-N 1030, v.14.2.0.10, A01
(Driver)
Recommended
Description
This package provides the Intel Centrino Wireless-N 1000/1030, Advanced-N 6230 Driver and is supported on Inspiron N5110 and Vostro Notebook more…
Intel Centrino Advanced-N 6230/Wireless-N 1030
Bluetooth Adapter Driver
(Driver)
Description
This package provides the Intel Centrino Advanced-N 6230/Wireless-N 1030 Bluetooth Adapter Driver and is supported on Inspiron N5110 and Vosmore…
Add to My Download List
Dell Wireless WLAN 1502 Half Mini-Card Driver
(Driver)
Description
This package provides the driver for Dell Wireless WLAN 1502 Half Mini-Card and is supported on Inspiron Notebook and Vostro Notebook modelmore
Intel WiMax Link 6150 Driver
(Driver)
Description
This package provides the Intel WiMax Link 6150 Driver and is supported on Inspirion and XPS Notebook models that are running the following
Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100
Ethernet Controller Driver
(Driver)
Description
This package provides the Realtek RTL8111E-VB Gigabit and RTL8105E-VB 10/100 Ethernet Controller Driver and is supported on Inspiron N5110 amore…
I had to install Dell Wireless 1702 WiFi +
Bluetooth Driver
The wireless adapter was defined by this driver, however, the Bluetooth still has an exclamation mark in front of it, and when the Dell WLAN and Bluetooth client installation finished, a pop up message said that Windows couldn't install the device
well, although there was a folder added in documents folder named 'Bluetooth Folder'
Yes, the Bluetooth was named with 'Generic Bluetooth adapter' before installing 'Driver above'. However, after installing the driver above, the Bluetooth adapter named with ' Dell wireless 1702 Bluetooth v3.0". But as you see it's
still not working will.
The sceen shot shows the device manger before installing Dell
Wireless 1702 WiFi + Bluetooth Driver
These screen shots shows the device manger after installing Dell
Wireless 1702 WiFi + Bluetooth Driver
I've lit windows detect the operating program for this device on the internet, it said "Windows has detected that the operating program of this device is up to date. As this screenshot shows.
What should I do because nothing lift to try? If you have a look at the ninth drivers in my previous message, you will see that no other drivers for Bluetooth lift.
Also, I have tried to install Intel
Centrino Wireless-N 1030 WiFi Driver
But I have been told that "the installation is blocked', This package of installation cannot be installed on your system' I don't know what this
means, is it because Dell Wireless 1702 WiFi +
Bluetooth Driver is being installed
Could you please take some of your preciout time out to read carefully my points below to finish this problem?
first:
Yes, if you had a look at my first post, you would have seen that I really have downloaded and installed the drivers suitable for bluetooth, which was only Dell
Wireless 1702 WiFi + Bluetooth Driver, which made the bluetooth recognized by Windows 7(64Bit). However, the bluetooth in the device manager still has an exclamation mark as it is shown in the device manager.
I don't have any other drviers which can do more than the what Dell
Wireless 1702 WiFi + Bluetooth Driver did because I have tried all the drivers listed under 'Network', exept the what are for Etherent.
Yes, when I have tried adding the bluetooth between two laptops(Mohammad and Nasreen). the bluetooth was added for both laptops as you see in these screenshots below:
The Bluetooth devices of Nasreen's laptop whose bluetooth is having some problems in Device mangage.
The Bluetooth devices of Mohammad's laptop whosse Bluetooh is defined well in device manager.
But there is still problem in the device managre as shown in the screenshot listed before.
Second: (Important) That when I want to send files or recieving between two bluetooth added in either laptop, I could send them. Also, when I open the Mohammad's bluetooth added in Nansreen's laptop( screenshot
below), I can show what is inside it.
However, when I open the the Nasreen's bluetooth addd in Mohammad's laptop, I noticed no reponse at all because as you see that disconnected is written in fornt "Nasreen-Pc" as this screenshot:
Although sometimes Nasreen-Pc gets connected as screenshot below, but I am still not able to open the Bluetooth folder of Nasreen-pc from Mohammad-pc. When trying to do that, no response is there.
In other times, Nasreen-pc gets connected for a while, but it comes back disconnected.
Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose Bluetooth is having some problems in the device manager.(First Screen shot below) However,
the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
Finally: : when I clicked "right-click" on "Nasreen-PC" and then clicking on "detecting and troublshooting issues", I found that windows informed me that :
But which driver should I reinstall because I have already installed the Dell
Wireless 1702 WiFi + Bluetooth Driver almost twice?
A man should convert his anger and sadness into strength to continue living in this life.

Certain driver packages contain drivers from some of the essential services only and for additional services, separate drivers must be installed. Additionally, the service is installed only if a compatible device is installed (or paired).
Therefore, you are seeing the error.
If you are using the Bluetooth L2CAP Interface and Bluetooth Remote Control services and not able to install the services, you can try unpairing the device, restart the PC, pair the device and then check. If that too fails, you need to install a suitable
driver, sometimes even other OEM drivers solve the issue. You can Bing/Google about this. You can also contact Dell Support for more information.
Balaji Kundalam
Thanks a lot,
I really didn't understand what you mean with in your first part the service is installed only if a compatible device is installed (or paired).
The Bluetooth is integrated with
the laptop, then where other services will come from, all service are related to Bluetooth.
If there are some additional services not related to Bluetooth,
then how can I either let them functioning well or disable them in order to get rid of the yellow exclamation mark
on the name of my laptop in the Device and printers.
Also, I really have installed a
BCBT7(Broadcom Bluetooth) for HP which really defined the same Bluetooth issue,
Device manager after installing the entire setup of driver BCBT7(Broadcom Bluetooth) on HP laptop
but when trying to install the same
BCBT7(Broadcom Bluetooth) on Dell, I faced the error below, although there is an icon for Bluetooth in
the system tray. Also, the Bluetooth is integrated as
you have seen in the device manager.
You didn't answer me: Third:: I noticed that the name of Laptop whose Bluetooth was added listed in 'My computer' for the laptop whose
Bluetooth is having some problems in the device manager.(First Screen shot below) However, the name of the laptop whose Bluetooth is having problems wasn't listed on other laptop's "my computer"(Second Screen shot below)
A man should convert his anger and sadness into strength to continue living in this life.

Qosmio F50-10z' s front operation panel doesn't work

My front operation panel doesn't work. I have tried to recovery my computer and reinstall the VAP but it still doesnt work.
I want to why...

Hi!
What do you mean with if it doesnt work?
If you try to install a newer version of Toshiba Value Added Package you should remove the old version first. Reboot the notebook and install the newer one.
Last but not least try to update the BIOS. You can find it on the Toshiba website:
http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
Bye

My Internal Microphone Array (IDT High Definition Audio Codec) is not working

Hi,
My Internal Microphone Array (IDT High Definition Audio Codec) is not working.
I cannot do Skype calls.
I have already tried everything but still I'm not able to fix the problem.
Could you please advice me what to do?
Could you please provide me with a link with the drivers I may need to reinstall.
My computer is HP, Windos 8.1, 64-bit operating system, Intel i-7 processor.
I would really appreciate your quick answer to resolve this issue.
Many thanks,
Antonio
This question was solved.
View Solution.

Hey,
Try installing this driver: IDT High-Definition (HD) Audio Driver
If that fails, try using the HP Recovery Manager to roll back to the factory installed driver.
Test after both. Let me know if either option worked.
I worked on behalf of HP.

Help!! T6060 5.1 Front right speaker is not working properly!!

I have new Inspire t6060 5.1 speakers, but i have problems , because on riht side speaker is not working!! all speakers are working good, only one front right speaker is not working i have altec 97 (asus intergrated suond card), i have tryed to instal new audio drivers , but it has not solved the problem. there is the problem? plz help!!

Here here, you are not the only one.
Have absolutely no solution to this problem apart from sending it back and never buying anything Creative ever again.
They refuse to acknowledge this problem.

Audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

audio output will not work on external speakers. Internal speakers will work. What do i do to replace audio output slot

Right click your volume icon in the notification area and select "volume control options". From there, you should be able to select the external speakers.
I hope that helps!
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.

I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone.

[SOLVED] Front audio panel still not working on K9N Neo V3

Similar Messages

Maybe you are looking for