[SOLVED]fsck fails on bootup due to other hdd name

Hi,
is set up arch today on an initially 2 hdd sys ...
after it was set up and the files i wanted to keep were moved to the hdd which would remain, i disconnected one hdd ..
(i had to change grub/menu.lst sdb1 ---> sda1 due to this disconnect)
unfortunatly during bootup fsck still thinks it must check sdb1 which will fail because its not there
How do i solve this,
thanks,
Last edited by birdspider (2008-01-14 18:35:56)

ok sry, I had just to remount the hdd RW and rename those issues in fstab

Similar Messages

Some Gmail features have failed to load due to an Internet connectivity problem.

This error message comes up both using Firefox and Chrome when using G mail. Also if it works at all,
switching from compose to draft just takes very long or keeps working.
No problem with G mail using Internet Explorer or Safari.
I have used Firefox for many years & want to go back when I can solve this Vexing problem.

Thank you for your help.
I reset Firefox, re started and wanted to answer using G mail with Firefox,
and the same error message comes up.. When it does the screan gets
very lite with the error message on top.
'''''Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, or using the basic HTML version. Learn More.'''''
I am now using Explorer to send this!
Sy

The package failed to load due to error 0xC0011008

I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects
to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
---> System.Runtime.InteropServices.COMException (0xC0011008): The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was
passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
   at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadPackage(String FileName, Boolean loadNeutral, IDTSEvents100 pEvents)
   at Microsoft.SqlServer.Dts.Runtime.Application.LoadPackage(String fileName, IDTSEvents events, Boolean loadNeutral)
   --- End of inner exception stack trace ---
   at ST_0f39f89613ca43e9a6660953aa72fa2c.csproj.ScriptMain.Main()
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig,       MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
   at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Task failed: ST_Gen_Pkg_Src_SqlServ
Warning: 0x80019002 at CreateDynSSIS_DB_RunDynSSiSDB: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" finished: Failure.
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
Any help would be great! I've done a bit of Googling on the topic already.. and nothing has worked so far.

Hi,
Reason for the error: Old
version of the DTEXEC is picked up by SQL Server instead of the new one.
Refer this link for more info
THE PACKAGE FAILED TO LOAD DUE TO ERROR 0XC0011008
Hope this info Helps

Error: Component failed to run due to a Object Package scheduling failure

Hi,
BusinessObjects XI R2 SP 5, FP 5.1
I am trying to schedule a group of reports (crystal reports) via a package where the output destination is to an email. At the event of execution of the scheduled time for the package; the package fails with the error: Component failed to run due to a Object Package scheduling failure. (Note: When scheduled individually it is successful and it was copied to the package from its original location, so there is no mistake in parameters or ODBC connections)
When we go to the history and within the instance, we see that some of the reports have the status as success and some are failed with the same error message. Even though some of the reports are made to fail at the event of 'NO DATA'; what I do not understand is that how come some of the other reports (which contains data and which works when trying to run manually or scheduled individually) are failing.
I would understand something is wrong when the entire package fails which is not the case here as say of 50 reports, 5 are successful and the rest fails with the same error.

Sorry posted on the wrong section...
Edited by: Deepu Philip on Mar 18, 2010 5:38 PM

Object failed to run due to an error while processing on the Job Server

when i am scheduling a report ith email notification i am getting below error
error msg: Object failed to run due to an error while processing on the Job Server
i have configured email notification in bo cmc and server also SMTP enabled. while scheduling report to ueser i am getting error and even mails are delivered to users as well.

hi prithvi,
i am able to schedule reports to other destinations and reports are delivered as per the requirement.
i am able to telnet SMTP server from Adaptive job server machine on SMTP port.
have to check errors on log file....
@ COULD YOU PLEASE LET ME KNOW USER CAN SEND A MAIL TO USER IN SAME DOMAIN . WHILE SCHEDULING A REPORT AND AS OPTION AVAILABLE IN 4.0 LAUNCH PAD CAN HE SEND A MAIL DIRECTLY AFTER RUNNING REPORT.

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

Pr 6 of CS6 failed to install due to language error. System: Mac OS 10.9.4. Any idea?

attach a screenshot of the error message.

Administrator software failed to start due to an unexpected error

Not a terribly useful message from ARD after a fresh install of 10.5.3:
"The Remote Desktop Administrator software failed to start due to an unexpected error."
"The Remote Desktop software may not be installed correctly or the computer may require a restart"
It installed something in the system on first launch then popped up with this message. My main concern is that it pooched my system in the process by replacing something new in Mac OS X 10.5.3 with something old from ARD 3.2...
Restarting now but who knows, might not be back for a while... %-\

Kill the "ARDAgent" program, either in Activity Monitor or Terminal, and it will start back up again. When you see it running again(make sure it's a new instance via the PID), you should be able to start Remote Desktop up without any problems after that.

HSRP fails to work due to h/w failure

We have a situation that HSRP fails to work due to a partial h/w failure on the active router.
What happened is the active router continously getting input error on its Ethernet interface. User traffic fails to be received by this router. However the router is still able to send hello message to its standby router .When we do a sh standby on the active router, it says unknown standby which concluded that it does not receive hello message from the standby. The fault happened everyday . we can clear the problem by rebotting the router but fault came back the next day again for several times. Once we replaced the active router , problem did not return.
In understand HSRP uses mulitcast protocol . but I would like clarification that HSRP is using unidirectional comunication with the standby group. In a situation like this ,my assumption is the TX circuit on the LAN is working but teh RX circuit failed. The standby router would never know the LAN interface of actice router fails to receive its hello messages. Therefore the fail over never trigger.
Appreciate your feedback on this.
Regards
Edmond

I believe HSRP use multicast address for the hello but it still use broadcast to ensure the standby router is active. I can't find such info. to prove it. Please correct me if I am wrong.
For the LAN connection, if the RX is failed, the interface should not up, or say, e.g. if the RX-pair of cable is not connectioned, the interface should down. So, I believe there is something wrong in the LAN interface, it may not only the RX side error.
Just my 2 cents.

The Remote Desktop administrator software failed to start due to an unexpected error...

Hi all...
Suddenly, I'm getting this error message when I try to open ARD. It was working a week ago and I'm not aware of changing anything. Any advice?
This is the 3.6.1 version of the ARD admin and I have the 3.6.2 Client installed (that was the way it was before, too, when it was working).
Note: I did try a fix from the forums that was posted in 2009, which required deleting the ARDAgent from the RemoteManagement folder in System/Core Services... and then reinstalling again using the Apple ARD Admin download for same. It worked for one run of the program, then the error came back.
What do you guys think?

bcvanbelle wrote:
Updated from 10.5.1 to 10.5.2. System seemed slow at first, noticeable keyboard lag and otherwise sluggish. Noticed that Remote Desktop no longer worked. Installed Graphics update. No more typing lag and speedier performance. Remote Desktop still dead.
Error message:
The Remote Desktop Administrator software failed to start due an unexpected error.
Hmphf.
You may have to reinstall the Remote Desktop SW. See if that helps.
I don't think it's a coincidence that this update "fixed" the Remote Desktop SUID warning, and it also removed the potential update from my computer which I had placed on "Ignore" since I did not need it and did not need the warning, either. So there is a connection between this update and the Remote Desktop SW.

Failed to solve variable web.framesrc.afrPushIframe using path .//IFRAME[@name='afr::PushIframe']/@src

I get this problem Failed to solve variable web.framesrc.afrPushIframe using path .//IFRAME[@name='afr::PushIframe']/@src
So far in the posts i only see this problem . Please let us know how to solve this?
Thanks
Sankar

Tses wrote:
Am I the only one in the world who tried ΟLT 12c with ADF 11g R2 PS3 ?
:-(Hi! You're not alone :)
We tried to record some load tests (OpenScript 12.2.0.1 Build 223) for our ADF R2 application.
But during the playback I had the same error: "Failed to solve variable web.framesrc.afrPushIframe using path .//IFRAME[@name='afr::PushIframe']/@src ".
Haven't you found the solution yet?
By the way, when I use operation "Revert to Recorded" for all nodes of my test and playback it again, I see in results that the script has passed without errors, but nothing has changed in database.
Thanks.
Natalie

"Failed to transfer due to internal error" in AC

I am running CCM 4.1(2)
I have several receptionists that use attendant console. When anyone of the receptionists log into AC call control comes up. When they try to transfer to users in the directory they all get the "Failed to transfer due to internal error" I can't find this error anywhere. I don't know how to correct this issue. Any ideas?
Thanks

I suppose that beside CCM 4.1(2) you are using AC 1.4 (1), if yes, then you need to upgrade to AC 1.4 (1) ES11 or upgrade at least to CCM 4.1(3)ES42 or CCM 4.1(3) sr3c
HTH
//Jorge

Object failed to run due to insufficient security privileges

Recently migrated from BO XI and Crystal XI to bo 4.1sp2 and Crystal 2013.The recurring crystal reports were migared to new environemnt and schulded to run 1st of the month.There are 300+ reports.The report detail says all these reports are schduled by Adminisatrtor because It was migrated by administartor account.
First of the month all reports failed and error is 'object failed to run due to insufficient security privileges.
And In the event viewer, there were warning from source BusinessObject_cms
"The security for the object identified by 41173 could not be verified during schedule attempt."
Can someone help me to find out the root cause of this issue.thanks.

Hello,
There are many possible root causes.
First check that the migration was complete successfully using the Import Wizard or UMT.
Otherwise, this may occur if the owner was not migrated properly or if the universe contains some row level security..
I hope this helps.
Thanks & Regards,
Insaf

How to resolve this: Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode.

Keep getting this message while using Gmail "Some Gmail features have failed to load due to an Internet connectivity problem. If this problem persists, try reloading the page, using the older version, or using basic HTML mode. "
I have to use the older version of gmail for it to work properly.

now i cant even send emails out of gmail, except when using the older version.

My photoshop cc not you boot and I get a notice that says failed to start due to an unexpected end of file

my photoshop cc not you boot and I get a notice that says failed to start due to an unexpected end of file

See here:
Unexpected end-of-file

The workflow failed to start due to an internal error

My approval workflow never work in my machine before. It was a newly installed machine. when i start the Approval workflow, it stated "The workflow failed to start due to an internal error'. What other circumtances might lead to this problems?or you can email me @ [email protected]

hi
Finally it worked for me after reinstalling the features on the site collection. deactivating and reactivating didnt help. once i uninstalled and re installed them it worked.
Here are the steps i performed.
OffWFCommon
stsadm -o deactivatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
stsadm -o uninstallfeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -force
ExpirationWorkflow
stsadm -o deactivatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
stsadm -o uninstallfeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -force
ReviewWorkflows
stsadm -o deactivatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
stsadm -o uninstallfeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -force
SignaturesWorkflow
stsadm -o deactivatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
stsadm -o uninstallfeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -force
translationWorkflow
stsadm -o deactivatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force
stsadm -o uninstallfeature -id C6561405-EA03-40A9-A57F-F25472942A22 -force
install & activate
OffWFCommon
stsadm -o installfeature -name offwfcommon -force
stsadm -o activatefeature -id C9C9515D-E4E2-4001-9050-74F980F93160 -url <url> -force
ExpirationWorkflow
stsadm -o installfeature -name Expirationworkflow -force
stsadm -o activatefeature -id C85E5759-F323-4EFB-B548-443D2216EFB5 -url <url> -force
ReviewWorkflows
stsadm -o installfeature -name ReviewWorkflows -force
stsadm -o activatefeature -id 02464C6A-9D07-4F30-BA04-E9035CF54392 -url <url> -force
SignaturesWorkflow
stsadm -o installfeature -name SignaturesWorkflow -force
stsadm -o activatefeature -id 6C09612B-46AF-4B2F-8DFC-59185C962A29 -url <url> -force
TranslationWorkflow
stsadm -o installfeature -name Translationworkflow -force
stsadm -o activatefeature -id C6561405-EA03-40A9-A57F-F25472942A22 -url <url> -force

[SOLVED]fsck fails on bootup due to other hdd name

Similar Messages

Maybe you are looking for