[SOLVED] Full Screen Windows All The Time?

I am currently using Arch+Evilwm on both my desktop and netbook, and generally I am very happy with Evilwm, but on the netbook I find myself making windows full screen all the time (to maximize screen space). Does anyone know if Evilwm can be altered to make all windows full screen all of the time?
Last edited by NilsKunnas (2010-03-25 20:13:45)

[Someone else sought and found various answers] to your question.
Last edited by Wintervenom (2010-03-25 19:58:21)

Similar Messages

  • Keeping N85 screen on all the time

    How do I force my N85 to keep the screen on all the time when using Google Maps? I have tried to turn off all the Power Saving, Screen locks etc, but the screen still goes off after a few seconds. I have the phone plugged into the cigarette lighter so the battery running down is not a problem? 

    Install S60SpotON(free) or Smartlight (not free). These apps will keep the backlight on. Get spot on at http://www.outbank.de/index.php?id=29&L=1 or Smartlight from any S60 app store e.g Handango.
    Message Edited by davescot on 25-Oct-2009 02:07 PM

  • My iPhone 4S screen flash all the time. Like if its locked it turns on. I think some notification pop for some msc. Please HELP!

    My iPhone 4S screen flash all the time. Like if its locked it turns on. I think some notification pop for some msc. Please HELP!

    Basics from the manual are restart, reset, restore.
    Have you tried each of these?

  • Ipod phone screen flutters all the time how to fix it ?

    ipod phone screen flutters all the time how to fix it ?

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
      Apple Retail Store - Genius Bar

  • Very frustrated with my LG G2. My screen freezes all the time when texting. This started after the upgrade. My husband's phone is doing the same thing. We have reset the phones, deleted off pics and videos but nothing helps.

    Very disappointed in my LG G2. My screen freezes all the time especially when texting. This started after the update. My husband's phone is doing the same thing. We have done a hard reset, deleted pics and videos to clean up the phone but nothing helps. Any suggestions? Our phones are new.

    Lots of Frustration.  In some cases the LGG2 is rendered useless even as a phone.
    Here is what I did.
    Got replacement Phone.
    Same problems but I shut down all apps that I purchased even though they worked before KitKat.
    Found that If I have both WiFi and LTE Data on at the same time battery chewing stops. Do Not know why.
    Then I got 2 CM free utilities.  The Clean and Wash utilities. Run them and find the culprits grinding CPU
    cycles and running down the battery.  Number One is the Verizon Voice Mail service constantly turning on and off
    and retrieving data not there.  Turn of the extra Voice mail and use the old access with the *6.  Unless you have
    100 messages a day for business your hosed until this KitKat issue is fixed. Get the CM battery utility.
    YOU can see the battery suckers and shut them down when not using automatically.
    Start putting back one application at a time you used often and see it they work and if the utilities will tune them
    down if they cause problems.  The LG will get better but with some limitations.
    LG and Verizon have a problem with what was a great phone.turned bad overnight.
    whatmorecanyousay

  • Need to load only delta where I receive full initial file all the time

    Hi All,
    Can any one let me know is there any feature in DS where we can load only delta/updated/changed fileds from the flat file (which is full load)...
    Scenario is : system will send all the time full initial load in a flat file format where DS need to load initially all the records later it has to update only the delta changes... So wondering do I need to perform full load in DS all the time or is there any feature to load initially full file and load only updates moving forward?
    Thanks
    Rajeev

    If you are indeed getting a full dump of the entire target table from the source system, every time, you may find it faster to truncate-and-reload your target table, depending on what else (if anything) goes in there, the number and nature of transformations, etc. Running a really large set of records through a Table Comparison transform, comparing on all fields (which it sounds like you'd need to do), can take a while, and given that you've always got "all the records," may be beside the point.
    You also may want to investigate the use of checksum fields. It's possible that adding (and, of course, calculating) checksum fields on each row in both the source and target and then comparing those to identify updates would be faster than doing a Table Comparison transform-based comparison of each field, for each record.
    Best wishes,
    Jeff Prenevost

  • Dashboard - displaying a widget on top of all windows all the time

    Seems that I remember in previous versions of Dashboard, you could get it to show selected (or all) widgets all the time. Call it "on the desktop" or "on the top level" or whatever, but you didn't have to enter the expose-like environment to interact with a widget.
    Is there a way to do this or am I missing something or did they take this away in the later version(s) or ...??
    Widgets have been more of a novelty to me as I haven't really had a need for widgets until now. I have one widget that I'd like to have shown all the time on my second monitor as, well, as a dashboard display. But I need it there all the time.
    I also seem to remember using a 3rd party util that provided another way to do this, but all the ones I've just looked at and tried don't offer that desktop-level functionality.
    Thanks much in advance!!
    SA
    Dual 1GHz G4   Mac OS X (10.2.x)  

    I may have just answered my own question.
    Seems there's a wiki on it (you'll have to copy/paste this link):
    http://en.wikipedia.org/wiki/Dashboard_(software)
    It involves hitting (and holding down) the hot-key for Dashboard (F12 unless you've changed it in the sys prefs), dragging the widget you want and then releasing the hot-key. When released, you should still be dragging the widget and it should remain floating on the desktop.
    In addition, there's a command-line terminal hack for developers which will apparently make this permanent, although I haven't verified this yet:
    defaults write com.apple.dashboard devmode YES
    It seems to be working for me so far. Anyone care to verify this?
    Thanks again!
    SA

  • Why is the ipod screen on all the time when plugged in

    and conversely, why does the screen only show the time when you are actually walking around playing music?
    Is there any way to change that? I want to see what song is playing, not what time it is or whatever that number on the screen means.
    thanks
    Bob

    I don't want it to stay ON, ie lit -- I just want the information on the screen to stay the same, is that so hard? The time is on that screen anyway, why not give us an option to leave it that way? The battery lasts plenty long compared to older ipods.
    Bob

  • Fan running at full speed and all the time!

    Hi,
    I was wondering what could be the reason for my fan running on full speed at all times?
    It is pretty annoying especially when I am in a quiet room. This just started happening this morning and I thought it was just going to stop but it didn't so I restarted my MacBook and shut it down also and still no luck.
    Oh...
    My battery meter only says 1:45 after I just took it off the charger when it said it was fully charged and I had the green light on my charger.
    What could be the reasons for these two things?
    Thanks,
    Sam

    I reset the PMU and the fan is still going at full blast right when the MacBook starts up.
    Will I know that the PMU is reset or will it just fix the problem if it is?
    Does anyone know a solution?
    The computer is running fine but it's just the fan that is really loud and going at full speed and the battery life is extremely short for some reason.

  • I phone 6 32 gb lags a lot ,rotating screen hangs all the time....crappp

    my iphone 6 32 gb lags a lot .every time i open whatsapp my phone freeze for a while.When i play you tube or use camera rotating screen hangs then i have to ancel all the apps and start all over again so annoying

    Just curious. What size is your iPhone 6? They come with 16 GB, 64 GB and 128 GB. There is no 32 GB model.

  • Why do I get a full screen window of the "Text Edits" tool...?

    I got Acrobat 8 and when I mark some text with the Text Edits tool and afterwards types som replacements, I just get one big pop-up box filling the whole screen instead of the normal sized in the left margin as usual. And I am not able to see what I'am typing since this kinda lies outside the screen picture. Is this a matter of settings - or a bug, or anyone else tried the same?
    Memebers of my work group use the same version with the same updates without problems.

    If you can't boot in the usual way, try a safe boot. During startup, you’ll see a progress bar, and then the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. If you have more than one user account, you must be logged in as an administrator to carry out these instructions. Safe mode is slower than normal, and some things won’t work at all. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the startup volume is on a software RAID, you can’t boot in safe mode. If you're able to boot, launch the Console application in any of the following ways: ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.) ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens. ☞ Open LaunchPad. Click Utilities, then Console in the icon grid. Select the most recent panic log under the heading System Diagnostic Reports on the left. If you don't see that heading, select   View ▹ Show Log List   from the menu bar. Post the entire contents of the panic report — the text, please, not a screenshot. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header and body of the report, if it’s present (it may not be.) Please don't post shutdownStall, spin, or hang reports.

  • S10-3t. Help, my computer crash & blue screen almost all the time

    hello,
    I have problem with my new bought S10-3t, it comes with pre-installed win 7 home premium. I am not sure if it is coming from the hardware or software, but it does crash and blue screen a lot and almost every time. Especially when I am trying to update windows (it always require me to reset it back to factory setting after did this).
    Btw, I have uninstall some of the bloated software that came with the system and I also installed Norton Internet Securtiy on it. I have also done one recovery restore many times and the problem still persist. Now I am wondering either I should return it back to lenovo or keep it because I am sure its going to be a hassle to return it back

    afham_86,
    Systems should be tolerant of some software changes - not know what all you have removed, how you removed it (deleting files vs uninstall) and when the problems started in relation to the changes you made it's going to be difficult to provide an easy answer.
    You say you've used OKR.   Have you shutdown the system and started up with the recover button and selected the option to restore to factory state?   If it won't do this, then either the hard disk is corrupted and you are going to need service, or you have a memory or systemboard issue in which case you are going to need service.
    I would recommend trying to recover completely to factory state, and failing that, to call technical support and log your case.  (save the WNxxxxx number).   If service recommends repair, you can either send it to the depot and see if they can fix it, or contact sales and arrange for a replacement.  In order to work through sales, you will need to have called service and have that service case number handy.
    Sorry that you are having trouble.  
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Ipad screen flashing all the time

    Since it seems the last ios update my ipad screen (brand new last Christmas, so just barely 1 year old), just flashes.
    Occassionally, after shutting down and doing nothing for hours it stops flashing. then I will open an app, safari or somethign and bam, it just starts flashing again. making it unusable and very very very irritating. like feel like leaving apple type frustrating.

    Then it seems that there is a hardware defect or just damage. I would go to the Genius Bar. This seems like something out of your control at this point.

  • Error Message stays on the screen all the time

    This message stays on my screen almost all the time. At the bottom it says "Press center to dismiss" but I have to press over and over multiple times to make it go away and then it usually comes right back anyway. The error message says "Firewire connections are not supported. To transfer songs, connect the USB cable provided." I don't have any other problems. It seems to be a bogus message and I can't get rid of it.

    Have you tried these basic troubleshooting steps?
    The Five Rs.

  • N97 Keeping the Display ON all the time

    Is there anyway to do this?
    The max time I can keep the display on for is 60 second, EVEN if the phone is connected to the mains adapter. This is rather stupid since there are times when I want the screen on all the time - eg. when connected to a power adapter in the car and running a GPS maps routing program.  I know Nokia Maps has an option to keep the screen on all the time, but as far as I can see Garmin MobileXT does not.
    It seems odd to me to have to build this option into Nokia Maps - why not make it available as an option in the actual Symbian OS, then it doesn't need to be coded into every single app running on that platform.
    Perhaps I am missing something? What do others do to get round this limitation?
    Thanks
    NigelS

    http://www.drjukka.com/KeyLockClock.html
    try this, i use it all the time i think since it was in v50 or something. great great app for some functions like charging with light on  
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Maybe you are looking for