[Solved] Gambas3 not working after installation.

When gambas3 was released i downloaded source and installed in my arch machine with out knowing that same package is available in arch repo. After install i could open and work in gambas3 with out an issue. However, When gambas3.1 was released i downloaded and installed latest package from arch repo. This time gambas3 did not even open. I also would like to inform that i have not uninstalled gambas3 (installed from source) before installing gambas3.1. Any help is appreiciated...
Last edited by sundar_ima (2012-04-14 02:39:36)

Here is what i get if i run gambas3 from cli.
ERROR: #2: Cannot load class 'Container': Cannot load parent class: Cannot load class 'Control': Unable to load class file
Segmentation fault

Similar Messages

HT1937 I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened

I have installed an app : Birdfield guide in my iPhone 4. But the app is not working after installation. It shows black screen when opened. I need suggestions to make it work or the reasons for not working.

Yes TeeKnows, try deleting it and download it again. After finished installation if still shows black screen delete it out off 'running apps' by double tapping the home button and swipe it off. If still shows black screen then try fully turning off your iPad (holding the sleep button) and turn back on again.
I hope I helped
thanks
Lydia

OBS not working after Installation

Hi All,
I am having a had time to make OSB 10.3.0.3 x64 working on my Dell 1850 x64 machine with Windcows Server 2008 x64 on it.
OK, I've done is:
I do have a SCSI card attached to this server and a tape drive. All system is up to date with all latest drivers and firmware. I did install HP StorageWorks Library and Tape Tools to test my tape drive connectivity and performace and it is all good. After that I did install OSB , the installtion went just fine and it let me pick my tape drive. ...... and here I have issues....
1. After I finished my installation I went to windows services mmc to see if OSB service is running...and it wasn't, so I started it.
2. I went to CMD and typed "obtool" and got an error message:
obtool: Error: this host's identity to Oracle Secure Backup has not yet been established.
3. I tryed to run a Web Administration Tool and got an error page.
4. Restarted the server.
5. Apache log folder in OSB Home is empty, there is nothing there. Another thing I found that my "OSB HOME \admin\config" folder has only "dataset" folder in it when it should have folders inside. It looks like it is not configuring Apache and OSB domain for me after installation.
6. Went to CMD and run: "obtool --initnewdomain" and it let me to crete it. Even let me to get onto obtool after that but Web Admin Tool is still not working.
7. I run my HP StorageWorks Library and Tape Tools again to see if SCSI card and drive connectivity is fine.... and it cannot detect my drive anymore.
So, I did a lot of rebooting and reinstalling and it still doesn't work. There is nothing running on the same TCP port on my system and as long as OSB is installed I can not get into my tape drive using HP Tape drive tools, not even detect it.
I did a bit more testing, instead of installing x64 OSB version I did try to install x86 (32 bit) on my x64 machine. The result is that Web Admin tool is still down (I am sure it is because Apache x86 on x64 machine) which is OK, and obtool is running fine, I can start it....... so, what would be your suggestion ?
P.S. I do have a development server, which is absolutely the same including SCSI card, the only difference is that it has Windows 2003 x86 installed and has DB 11g running on it. I did connect my tape drive to thys system, installed OSB for testing and Web Admin Tool, obtool was just fine. I even was simply able to test tape backup from EMC using OSB.
Thanks

I did that....and many times.
I, figured it out!!!! When I did try to manually run "obhttpd.exe" it gave me an error that "msvcr71.dll " is missing. I've found that MS .Net Framework and MS Visual C++ 2005 contains it. So, before installing any updates on my machine, I did install all MS .Net Framework versions from 1.1 to 4.0 including all updates and Microsoft Visual C++ from 2005 to 2010. In addition, I did copy this DLL file into my System32 folder. Did install OSB and it still didn't work but "obhttpd.exe" was starting without error messages. The only thing I didn't try yet was to rename a server. So my server name was "san-manage3" and I renamed it to "san-bk3", rebooted, installed OSB and it worked. So, I don't know if it is because of long DNS name or all together, but it is fine now.

Snow Leopard not working after installation

After successful installation of Snow Leopard on a new internal hard drive (connected through IDE to SATA adapter) in my Macbook (late 2006), it is not working. No icon is clickable, only cursor can move. Please help!

The OSX 10.6.3 was successfully installed from the DVD. This is the screen after booting. But it is frozen. There is no response to clicking any of the icon in the deck or in the menu bar. I can only move cursor. That's all.

In-built mic not working after installation of windows 7 on my hp nc8430

So I installed windows 7 on my laptop which originally was running windows xp (hp compaq nc8430) and it turns out that the inbuilt mic is not working and it won't even recognise the SD card that i insert in the card slot. Everything was working perfectly before the installation. I checked the audio devices in control panel and it says the microphone is not plugged in. Also the screen resolution is weird, it won't go above 1024x768, everything is too big for my liking.
Could someone help me out please? Thanks in advance.

Are you using Boot Camp to attempt to install Windows?
https://www.apple.com/support/bootcamp/

Internet does not work after Installation of Oracle10g on SuSE 10 Enterpris

Hi,
I installed SUSE 10 then configured the network services using network manager as it did not work by just putting the DNS servers and router address. The internet was working fine till I installed Oracle 10g. It somehow modified my DNS address from 203.97.33.1 to 203.97.33.14. The web interface for Oracle works fine.
If I run the Network manager again, my internet starts working but the Oracle web interface does not work.
I do not understand what's happening. Please help.
Thanks.

I have never liked using Network Manager with Oracle. If you use traditional ifup, you can use SCPM and have different profiles. The first 2 things I do during an install of Suse Linux that will have Oracle 10g is disable Network Manager and disable IPv6. Go to /etc/hosts and remove all entries that have the IPv6 addresses. The 10g OC4J applications from database and application servers have problems with IPv6 addressing. Make note of your current DNS addresses and your route before reconfiguring to ifup. Use route -n to get the router address if you do not already know it. It is the gateway with values. It is also a good idea to configure your wired ethernet device to start on boot up, then you can ping your hostname whether or not your cable becomes disconnected, i.e. still access dbconsole with the router down.

Lsnrctl and sqlplus do not work after installation

I install Oracle 10g on my Linux, but it does not work. For example when run lsnrctl or sqlplus, nothing happens. Any idea?

Hi,
Create a bash profile .bash_profile in your home path as follows:
# .bash_profile
# Get the aliases and functions
if [ -f ~/.bashrc ]; then
. ~/.bashrc
fi
# User specific environment and startup programs
PATH=$PATH:$HOME/bin
export PATH
export ORACLE_BASE=/u01/oracle10g
export ORACLE_HOME=$ORACLE_BASE/product/10.2.0/dbhome_1
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
export ORACLE_SID=TESTDB
Save this setting and run this file first time
$. .bash_profile
Once you run this I hope sqlplus should work provided you supply correct path and directories names to this file.
Use netca to recreate your listener and start it.
$lsnrctl start
$lsnrctl status
Hope it will help.
Best regards,
Rafi.
http://rafioracledba.blogspot.com

[SOLVED]Keyboard not working at installation (so, I can't install)

Hello,
When I execute the installation program (from a CD or USB), keyboard works when the GRUB shows up, but when I press enter to run archiso, after the kernel and module loading, I arrive to "archiso login:_" screen with a non-working keyboard, neither my PS2 nor USB keyboard, so I can't login in and, of course, install arch.
I've been trying to collect some rare data from the kernel loading screen in order to ease finding a solution:
(after archiso kernel module loaded) -> ohci_hcd 0000:00:04.0: Unlink after no-IRQ? Controller is probably using the wrong IRQ.
(after setting clock) -> select() to /dev/rtc to wait for clock tick timed out.
As I said, I tried from a CD and a USB with the same result. I've md5 the images I'd downloaded and they are correct.
Greetings
Last edited by Davigetto (2009-09-10 18:47:41)

Please, is there any workaround to this problem? I would wish to install arch on my PC.
Maybe installing an older version CD could work, but i am not sure if older versions of arch offer support for ext4...
EDIT: Ok I solved it, it was a very strange option in Bios, called "Installer OS Select", where the options to choose were Windows or Others, and I choose others and voilà!, Keyboard working.
Strange, right?
Last edited by Davigetto (2009-09-10 18:48:46)

[SOLVED] Audio not working after system update

Hi all,
About 4 days ago, I installed Arch Linux (full systemd) with LXDE on a Dell Inspiron Mini netbook. Everything seemed to be OK until today, when I did pacman -Syu and then installed the SLiM login manager. After rebooting there was no audio. I am not sure if this happened because of the upgrade or because of SLiM. I am pretty new to systemd, so I could be missing something very obvious. I have tried many things so far, with no success:
1) I disabled SLiM and instead started X from the terminal at boot, and nothing happened.
2) I have removed my username from the 'audio' group, added it again, removed it, etc... No change.
3) I downgraded systemd, systemd-sysvcompat, and xine-lib (just in case) to their previous version and nothing happened.
4) I seem to be detecting the sound card correctly. If I run "aplay -l" as my normal, non-root user I get the same output as the root user:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
5) If I login with SLiM, my session seems to be setup correctly, as far as I can tell:
$ loginctl show-session $XDG_SESSION_ID
Id=1
Timestamp=Mon, 2012-10-29 00:38:35 EDT
TimestampMonotonic=14973592
DefaultControlGroup=name=systemd:/user/vrg/1
VTNr=7
Display=:0.0
Remote=no
RemoteUser=root
Service=slim
Leader=274
Audit=1
Type=x11
Class=user
Active=yes
State=active
KillProcesses=no
IdleHint=no
IdleSinceHint=0
IdleSinceHintMonotonic=0
Name=vrg
6) I reinstalled pulseaudio, pulseaudio-alsa, alsa-plugins, and alsa-oss... Nothing.
7) I do not have the ~/.asoundrc file.
Here is a full list of the packages I upgraded:
[2012-10-28 11:19] Running 'pacman -Syy'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] Running 'pacman -Syu'
[2012-10-28 11:19] synchronizing package lists
[2012-10-28 11:19] starting full system upgrade
[2012-10-28 11:20] upgraded linux-api-headers (3.5.5-1 -> 3.6.3-1)
[2012-10-28 11:20] Generating locales...
[2012-10-28 11:20] en_US.UTF-8... done
[2012-10-28 11:20] Generation complete.
[2012-10-28 11:21] upgraded glibc (2.16.0-4 -> 2.16.0-5)
[2012-10-28 11:21] upgraded binutils (2.22-10 -> 2.23-1)
[2012-10-28 11:21] upgraded bison (2.6.2-1 -> 2.6.4-1)
[2012-10-28 11:21] upgraded coreutils (8.19-1 -> 8.20-1)
[2012-10-28 11:21] upgraded systemd (194-4 -> 195-2)
[2012-10-28 11:21] upgraded device-mapper (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded cryptsetup (1.5.0-2 -> 1.5.1-1)
[2012-10-28 11:21] installed nss-myhostname (0.3-3)
[2012-10-28 11:21] warning: /etc/shadow installed as /etc/shadow.pacnew
[2012-10-28 11:21] upgraded filesystem (2012.10-1 -> 2012.10-2)
[2012-10-28 11:21] upgraded firefox (16.0.1-1 -> 16.0.2-1)
[2012-10-28 11:21] upgraded gcc-libs (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded gcc (4.7.2-1 -> 4.7.2-2)
[2012-10-28 11:21] upgraded lirc-utils (1:0.9.0-32 -> 1:0.9.0-33)
[2012-10-28 11:21] upgraded lvm2 (2.02.97-1 -> 2.02.98-1)
[2012-10-28 11:21] upgraded mkinitcpio (0.10-1 -> 0.11.0-1)
[2012-10-28 11:21] upgraded syslinux (4.05-7 -> 4.06-1)
[2012-10-28 11:21] upgraded systemd-sysvcompat (194-4 -> 195-2)
[2012-10-28 11:21] upgraded xine-lib (1.2.2-2 -> 1.2.2-3)
More information:
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Oct 29 00:38 by-path
crw-rw----+ 1 root root 116, 5 Oct 29 00:38 controlC0
crw-rw----+ 1 root root 116, 4 Oct 29 00:38 hwC0D0
crw-rw----+ 1 root root 116, 3 Oct 29 00:38 pcmC0D0c
crw-rw----+ 1 root root 116, 2 Oct 29 01:53 pcmC0D0p
crw------- 1 root root 116, 1 Oct 29 00:38 seq
crw-rw----+ 1 root root 116, 33 Oct 29 00:38 timer
$ lsmod | grep '^snd' | column -t
snd_hda_codec_realtek 52245 1
snd_hda_intel 22256 1
snd_hda_codec 83677 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 61470 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 5869 2 snd_pcm,snd_hda_intel
snd_timer 14902 1 snd_pcm
snd 44874 8 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
If I run 'fuser -v /dev/snd/*' I get nothing (blank) and if I run 'fuser -v /dev/dsp' I get file not found. I've also done 'amixer sset Master unmute' and 'speaker-test'. Everything seems OK, except that I can't hear anything!
Any help or suggestions that could point me in the right direction would be greatly appreciated.
Last edited by vrg (2012-10-29 07:25:36)

Thanks Rasi. Incidentally, I just solved the issue a few minutes ago and was about to post the answer, but yes, you are right... the device was muted. It's embarrassing, but it did not seem obvious to me that the device was muted... All the sliders seemed OK, with nice, green values between 50 and 100. Also, the LXDE volume control was unmuted with a value between 50% and 100%, and I ran the 'amixer sset Master unmute' command several times. Clearly, this command does not do the job.
What I was missing is nicely described in the PulseAudio troubleshooting:
If one experiences no audio output via any means while using ALSA, attempt to unmute the sound card. To do this, launch alsamixer and make sure each column has a green 00 under it (this can be toggled by pressing 'm')
I was not pressing 'm'... I know it's on the wiki, but this did not seem to be a PulseAudio issue, which was working perfectly yesterday and was not upgraded, so the PulseAudio troubleshooting was not the first place I looked for solutions. I wonder why the device got muted in the first place.
Thanks again for the help!

Oracle 10gR2 on Mac OS/x 10.5.6 - dbconsole not working after installation

Hi All,
Anyone able to get dbconsole up and running after the installaton using DHCP?
I followed the Quick Install guide linked on the OTN Mac Page:
http://www.pythian.com/news/1937/quick-install-guide-for-oracle-10g-release-2-on-mac-os-x-leopard-intel
I'm setup with DHCP (as they are in the quick install guide).
Config Assistant ran setup for Enterprise Manager successfully, but it looks like it did not create the repository or directories.
When I go to create manually with emca I get errors.
Curious if anyone has got this going out of the box or if there is a standard set of steps I missed out there post install to get it running.
Don't see anything in the official installation guide or Metalink either (except that DHCP is not really recommended).
Thanks,
Tony

Hi Anthony,
Unfortunately, the releases note for 10gR2 on OS X indicate that Enterprise Manager database control is unsupported for this release, so I don't think you'll see anything from Oracle about how to get dbconsole to work. That doesn't mean it isn't possible, of course, just unsupported. :-) A quick Google search isn't turning up anything so far, but maybe someone out there in Internet-land has managed to get dbconsole to work...
Regards,
John P.

JavaFX/NetBeans not working after installation of Mac OS X Snow Leopard

Hi guys!
I'm sort of in a hurry to get this working since I'm gonna demo my project tomorrow.
I just installed the new Mac OS X, and now my project won't run anymore!
I get the following dialog saying something like this (translated from Swedish):
com.sun.javafx.runtime.Main accidentally exited when using the plug-in file libjogl.jnilib.And the error that I get in the NetBeans console is:
Invalid memory access of location 0x0 rip=0x113750a14
/Users/calle/.netbeans/6.5/javafx-sdk/bin/javafx: line 138: 1889 Segmentation fault "$JAVA_CMD" "-Djava.library.path=/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop" -classpath '.:/Users/calle/NetBeansProjects/Robust/dist/Robust.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/shared/javafxrt.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/eula.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-anim.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-geom.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-runtime.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-sse.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-d3d.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-j2d-rsl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-ogl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-j2d-jogl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-sg-common.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-sg-swing.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-common.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-desktop.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-swing.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/jogl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/gluegen-rt.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/fxdloader.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/jmc.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/websvc.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-controls.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-charts.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/script-api.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-common.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-io.jar' com.sun.javafx.runtime.Main "robust.RobustMain"
/Users/calle/.netbeans/6.5/javafx-sdk/bin/javafx: line 138: 1889 Segmentation fault "$JAVA_CMD" "-Djava.library.path=/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop" -classpath '.:/Users/calle/NetBeansProjects/Robust/dist/Robust.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/shared/javafxrt.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/eula.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-anim.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-geom.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-runtime.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-sse.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-d3d.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-j2d-rsl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-ogl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/decora-j2d-jogl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-sg-common.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-sg-swing.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-common.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-desktop.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-swing.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/jogl.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/gluegen-rt.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/fxdloader.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/jmc.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/websvc.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-controls.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-ui-charts.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/script-api.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-common.jar:/Users/calle/.netbeans/6.5/javafx-sdk/bin/../lib/desktop/javafx-io.jar' com.sun.javafx.runtime.Main "robust.RobustMain"
BUILD FAILED (total time: 37 seconds)Can it be somthing about that the installation installed a new version of Java? Right now, the properties of my project says Java 1.6. Can't remember if I had 1.5 before or not... But maybe it changed anyway somehow.
What can I do, any ideas?

I'm seeing this exact same problem. After upgrading to Snow Leopard JavaFX simply fails with a segmentation fault. Any suggests?
standard-run:
[EL Info]: 2009.10.05 20:04:01.701--ServerSession(1968604756)--EclipseLink, version: Eclipse Persistence Services - 1.0.1 (Build 20080905)
[EL Info]: 2009.10.05 20:04:02.492--ServerSession(1968604756)--file:/Users/billbrown30188/NetBeansProjects/RoysterGroupFX/dist/lib/RoysterDB.jar-RoysterDBPU login successful
Starting app
Invalid memory access of location 0x0 rip=0x113d36a14
/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/javafx: line 138: 732 Segmentation fault "$JAVA_CMD" "-Djava.library.path=/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop" -classpath '.:/Users/billbrown30188/NetBeansProjects/RoysterGroupFX/dist/RoysterGroupFX.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/shared/javafxrt.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/eula.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-anim.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-geom.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/decora-runtime.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/decora-sse.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/decora-d3d.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/decora-j2d-rsl.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/decora-ogl.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/decora-j2d-jogl.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-sg-common.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-sg-swing.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-ui-common.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-ui-desktop.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-ui-swing.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/jogl.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/gluegen-rt.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/fxdloader.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/jmc.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/websvc.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-ui-controls.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-ui-charts.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/script-api.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-common.jar:/Applications/NetBeans/NetBeans 6.7.1.app/Contents/Resources/NetBeans/javafx2/javafx-sdk/bin/../lib/desktop/javafx-io.jar' com.sun.javafx.runtime.Main "com.ingresssoftware.roystergroupfx.Main"

Configuring ports not working after installation of HP 6000.

I had written last night about problems getting my HP 6000 Wireless E609n printer to work on my home network. There are three computers hard wired into a medialink router, with the printer attached to one that is running Windows 7. One of the other two computers runs Windows 7, the other XP. The three computers can see each other on the network. I downloaded the software for the XP and installed it, and the installation went okay, but the printer still will not print. It seems as if the problem is with the router or the settings on the printer. The printer works on the main machine, the one it is attached to. I printed the Printer Status Report, and under connectivity settings, the network status is offline with no active connection type. Its URL is 0.0.0.0. I was attempting to try and enter an IP address on the XP machine so that it could see the printer. So on the main machine, I tried to configure the ports to get the IP address. I got this error message 'An error occurred during port configuration. This operation is not supported.' I had this problem earlier too, so I uninstalled the printer and then reinstalled it, but the problem remains. I cannot obtain an IP address. Are there settings for the printer or the router that need to be changed, or is it something else? Any information would be appreciated.

It sounds like you have the printer connected a Windows 7 computer with a USB cable and are sharing this over the network. With this type of setup, you would not use an IP address since it would not have one. The printer would only have an IP address if it is connected to the router (ethernet or wirelessly).
Based on the description of the setup, there really shouldn't be a need to have it connected directly to a Windows 7 system. If you prefer to have it connected to a Windows 7 system directly and to share it with the other computers, this document from Microsoft discusses how to share it and this document from Microsoft covers adding a network shared printer in Windows XP.
Honestly, I recommend using the printer connected to the router for the simplest and most problem free setup.
HP's site does show the Officejet 6000 e609n supports wireless and wired network connections. The easiest option would be to connect the printer to the router with an Ethernet cable (wireless can be problematic in some setups).
This document from HP covers how to install this printer on a wired network for Windows 7.
This document from HP covers how to install this printer on a wired network for Windows XP.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

[SOLVED] Printer not working after reboots

I recently built my won desktop running Arch. Every thing works fine except for printer. Printer is Brother MFC-290c. It is a Multinational printer (i.e Scanner and printer together).
Once I configure the printer it works fine until the next reboot. After reboot printer user/group changes to root:scanner.
# ls -l /dev/bus/usb/005/002
crw-rw-r-- 1 root scanner 189, 513 Jun 9 07:17 /dev/bus/usb/005/002
So after every reboot I need to do "lsusb" to look for Bus and Device ID for the printer and change its owner/group to root:lp. After this step is performed Printer works fine until next reboot.
$ lsusb
Bus 005 Device 002: ID 04f9:01fd Brother Industries, Ltd
Bus 005 Device 004: ID 045e:00f9 Microsoft Corp. Wireless Desktop Receiver 3.1
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
How can I make sure that whenever I plugin this printer its user and group is root:lp instead of root:scanner
Last edited by nik (2013-06-10 00:48:50)

SOLVED :D:D:D
Thanks Strike0. That was a push in right direction. After reading your reply, I decided to take a look at my udev rules. There was not one for my printer but there was one for the Scanner. I do not yet know how to read udev file, but sure enough it looked as if it was causing all problems . Renamed the rules file for the scanner to see if everything works fine in its absence. Rebooted, Printer and scanner are both working fine now.

[SOLVED] Synapse not working after recents other packages upgrades

Hi !
After having upgraded a lot of packages, I figured out that Synapse is no longer working. It gives me the following output when trying to start it from shell :
[16:46:43.878282 Info] Starting up...
[16:46:43.944439 Info] [UILauncher] Binding activation to <Control><Alt>space
[16:46:43.944501 GtkHotkey-Debug] Listener Type: GtkHotkeyX11Listener
Preparing to bind <Control><Alt>space
Got accel 32, 12
Got keycode 65
Got modmask 12
[16:46:43.957062 Info] [GuiViewVirgilio] Screen is composited.
[16:46:43.957242 Info] [GuiViewVirgilio] Using cedilla input method.
[16:46:44.080733 Warning] desktop-file-service.vala:95: Pantheon is not understood
[16:46:44.092847 GLib-Critical] g_path_get_basename: assertion 'file_name != NULL' failed
Erreur de segmentation (core dumped)
Here's the package I've updated and caused this bug to appear...
[2013-10-09 14:03] [PACMAN] upgraded glib2 (2.36.4-1 -> 2.38.0-1)
Thanks for your help,
SilverWyrda.
Last edited by SilverWyrda (2013-10-09 20:09:55)

Thank you for your replies. I can confirm that removing gnome-weather app "solves" the issue even with the very latest updates. It seems in fact to be the line DBusActivatable=true in the .desktop entry that causes this bug as it is explained on http://web.archiveorange.com/archive/v/ … YqAEh0yuaA.
Mystery solved !

[SOLVED] Pacman not working after updating.

While I'm trying to resolve issue "package-query: requires pacman<3.6", I did wrong that entering "pacman-key --init" right after upgrading pacman. Now it neither upgrade nor install programs.
pacman -Syu
:: Synchronizing package databases...
error: failed retrieving file 'core.db' from mirrors.kernel.org : Could not resolve host: mirrors.kernel.org; Name or service not known
error: failed retrieving file 'core.db' from mirror.yandex.ru : Could not resolve host: mirror.yandex.ru; Name or service not known
error: failed to update core (download library error)
error: failed retrieving file 'extra.db' from mirrors.kernel.org : Could not resolve host: mirrors.kernel.org; Name or service not known
error: failed retrieving file 'extra.db' from mirror.yandex.ru : Could not resolve host: mirror.yandex.ru; Name or service not known
error: failed to update extra (download library error)
error: failed retrieving file 'community.db' from mirrors.kernel.org : Could not resolve host: mirrors.kernel.org; Name or service not known
error: failed retrieving file 'community.db' from mirror.yandex.ru : Could not resolve host: mirror.yandex.ru; Name or service not known
error: failed to update community (download library error)
error: failed to synchronize any databases
error: failed to init transaction (download library error)
pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#UseDelta
#TotalDownload
CheckSpace
#VerbosePkgLists
# PGP signature checking
# NOTE: None of this will work without running `pacman-key --init` first.
# The compiled in default is equivalent to the following line. This requires
# you to locally sign and trust packager keys using `pacman-key` for them to be
# considered valid.
#SigLevel = Optional TrustedOnly
# If you wish to check signatures but avoid local sign and trust issues, use
# the following line. This will treat any key imported into pacman's keyring as
# trusted.
#SigLevel = Optional TrustAll
# For now, off by default unless you read the above.
SigLevel = Never
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[core]
#SigLevel = PackageRequired
Include = /etc/pacman.d/mirrorlist
[extra]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#SigLevel = PackageRequired
#Include = /etc/pacman.d/mirrorlist
[community]
#SigLevel = PackageOptional
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs
Last edited by bilgee0629 (2012-02-06 13:34:40)

Gcool wrote:
Could you post the output of the following commands:
* ifconfig -a
* cat /etc/resolv.conf
* ping mirrors.kernel.org
* ping 8.8.8.8
* tail -50 /var/log/pacman.log
1)
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 metric 1
inet6 fe80::ea9a:8fff:fe63:6190 prefixlen 64 scopeid 0x20<link>
ether e8:9a:8f:63:61:90 txqueuelen 1000 (Ethernet)
RX packets 6820 bytes 1956857 (1.8 MiB)
RX errors 48 dropped 1 overruns 0 frame 46
TX packets 3693 bytes 398312 (388.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 1 collisions 48
device interrupt 43
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 16436 metric 1
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 26 bytes 2052 (2.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 26 bytes 2052 (2.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
ppp0: flags=4305<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST> mtu 1492 metric 1
inet 49.0.145.198 netmask 255.255.255.255 destination 8.8.8.8
ppp txqueuelen 3 (Point-to-Point Protocol)
RX packets 3103 bytes 1539691 (1.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3589 bytes 312371 (305.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4098<BROADCAST,MULTICAST> mtu 1500 metric 1
ether d0:df:9a:30:2d:8e txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
2)
nameserver 202.72.241.5
nameserver 203.34.37.3
3)
PING mirrors.us.kernel.org (149.20.4.71) 56(84) bytes of data.
64 bytes from mirrors2.kernel.org (149.20.4.71): icmp_req=1 ttl=53 time=241 ms
64 bytes from mirrors2.kernel.org (149.20.4.71): icmp_req=2 ttl=53 time=242 ms
64 bytes from mirrors2.kernel.org (149.20.4.71): icmp_req=3 ttl=53 time=242 ms
^C
--- mirrors.us.kernel.org ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2002ms
rtt min/avg/max/mdev = 241.653/242.080/242.345/0.504 ms
4)
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_req=1 ttl=255 time=10.3 ms
64 bytes from 8.8.8.8: icmp_req=2 ttl=255 time=11.4 ms
64 bytes from 8.8.8.8: icmp_req=3 ttl=255 time=210 ms
64 bytes from 8.8.8.8: icmp_req=4 ttl=255 time=7.34 ms
64 bytes from 8.8.8.8: icmp_req=5 ttl=255 time=10.6 ms
^C
--- 8.8.8.8 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 7.349/50.062/210.542/80.252 ms
5)
[2012-02-06 17:58] Running 'pacman -Rdd package-query'
[2012-02-06 17:59] removed package-query (0.9-1)
[2012-02-06 17:59] Running 'pacman -Syu'
[2012-02-06 17:59] synchronizing package lists
[2012-02-06 18:11] upgraded linux-api-headers (3.0.1-1 -> 3.1.6-1)
[2012-02-06 18:11] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2012-02-06 18:11] Generating locales...
[2012-02-06 18:11] en_US.UTF-8... done
[2012-02-06 18:11] en_US.ISO-8859-1... done
[2012-02-06 18:11] Generation complete.
[2012-02-06 18:11] upgraded glibc (2.14-6 -> 2.15-4)
[2012-02-06 18:11] upgraded libarchive (2.8.5-2 -> 3.0.3-3)
[2012-02-06 18:11] installed pth (2.0.7-4)
[2012-02-06 18:11] installed gnupg (1.4.12-1)
[2012-02-06 18:11] installed libksba (1.2.0-1)
[2012-02-06 18:11] installed libassuan (2.0.3-1)
[2012-02-06 18:11] installed pinentry (0.8.1-3)
[2012-02-06 18:11] installed dirmngr (1.1.0-3)
[2012-02-06 18:11] installed gnupg2 (2.0.18-1)
[2012-02-06 18:11] installed gpgme (1.3.1-2)
[2012-02-06 18:11] >>> Run `pacman-key --init` to set up your pacman keyring.
[2012-02-06 18:11] upgraded pacman (3.5.4-4 -> 4.0.1-4)
[2012-02-06 18:12] Running 'pacman -S firefo'
[2012-02-06 18:13] Running 'pacman -S firefox'
[2012-02-06 18:13] Running 'pacman -S package-query'
[2012-02-06 18:13] Running 'pacman -Syu'
[2012-02-06 18:13] synchronizing package lists

[Solved] Gambas3 not working after installation.

Similar Messages

Maybe you are looking for