[SOLVED] GE70 0ND hotkey + Fn-key for wireless drivers

Got myself a brand spanking new MSI GE70 0ND with with Win8.
Did not like Win8 so wiped it all and installed Win7Pro (x64).
After that I figured out that my hotkey and Fn-key for controlling wireless does not work (Somehow had managed to disable wireless, no idea how) so I had to reset the EC to get it working again.
Are there drivers for the hotkeys or some other way to get them to work in win7?
Did not see any obvious drivers in the driver page for GE70 0ND.
Thanks for help in advance.

You need S-Bar to utilize the hotkeys under Win7 (it's like SCM for Win8).
First install Microsoft.NET Framework 4: http://www.microsoft.com/en-us/download/details.aspx?id=30653
Then install latest S-Bar: http://www.msi.com/service/download/utility-19983.html

Similar Messages

BIOS UPDATE for GE 60 - GE70 0ND (GPU BOOST ISSUE)

I and some of my friends have GPU boost issue with MSI GE60 and GE70 0ND ... (GTX 660M) in TURKEY
We also have a forum for this issue and number of members increases day by day.
We have E16GAIMS.513 BIOS in our notebooks.
One of our friends sent his laptop to technical service and they downloaded newer BIOS 514 (WIN8)and this GPU issue is solved.
However, since there is no update for 514 BIOS in download tab, we cannot update our BIOS and GPU issue continues.
Can you upload this newer 514 BIOS update to download tab as soon as possible.
We are expecting your positive answers.

Quote from: pshywar on 30-March-13, 04:35:40
I think we should wait that this update is uploaded to main website in order to prevent some compatibility or etc issues.
BIOS update is a important issue and it can causes irrecoverable problems. So, we continue to wait
That's a good point; while I got back I was thinking of flashing it but had a re-read of the step-by-step guide before doing so and thought otherwise. Best wait for the official one, that is if they release it.
I'm also going to contact the customer service support to have this included in their download section. I made enough noise for them to update the HD Audio drivers, so here's to this getting the inclusion as well.
Quote from: Prema on 30-March-13, 05:59:24
It was a test, they may never publish it...
But they included the latest BIOS in the Topic Creator's friend's Notebook. Hopefully, if enough noise is made, they will publish it.
Quote from: darkhawk on 30-March-13, 09:47:09
Here's my thoughts. And you probably won't like them.
Try upgrading using that BIOS. What's the worst that could happen? You brick your machine? Make sure everything is backed up, and try it. You want the VBIOS portion fixed so it boosts? Well.....try that BIOS. And if it doesn't work or bricks the machine, you'll need to send it back anyway and they will probably load the BIOS on it then anyway.......
Either way, it's a win (albeit, in 1 situation it might take a few weeks....). You'll get what you want.
I obviously can't try it as I don't have a GE60.....
I think it might be best to just wait for the official one, as the warranty services in Australia are absolutely poops, be it any make or brand - most companies are not obligated to have the customer's best interest at heart, so if they can get away with voiding it, they will - so I'm not too keen to test this unofficial one lest it affects my warranty.
Thanks for your input though, nonetheless, darkhawk.

Is there any way to get function keys on wireless keyboard to function like they do on a PC for the iPad?

I need function keys for the warehousing system I run for work.
I am logged on via VPN and Pocketcloud app in a "PC like" desktop.
The program is E-term by Eclipse.
Hoping to be able to use wireless keyboard to do this.
No luck so far.

jpaul wrote:
Hi Jim,
Thanks for the post. I researched on your issue using different combinations of VI, pane, and path control event and was unsuccessful in getting an event to fire when the drag starts outside of the LabVIEW window. I think you are on the right path with using a Windows API, which then could be interfaced into LabVIEW using ActiveX or .NET containers. If you are able to detect it, then you can use a user event to fire a drag start in LabVIEW. This should then allow you to successfully fire a drag over event. The NI Developer Zone article below will get you started on creating and using user events:
Using Dynamic Event Registration to Watch for User Inaction With a Control
Hope this helps to get you started on the right path. Have a good evening!
Cheers,
Jonah
Applications Engineer
National Instruments
Hi Jonah,
Thanks for your efforts in confirming my results. I'd prefer not to use any activex or .net containers, since this will make the code extremely coupled to a specific platform. If I can find a way to do this, using window handles or something, via WinAPI that would be preferable, because I could use a conditional disable structure to comment out the code on non-windows machines.
If anyone has any ideas about how to receive these events, using window handles and messaging, that would be great.
Thanks,
-Jim

TS1569 Where do I find the pass key for the wireless keyboard?

Where do I find my pass key for my new wireless keyboard?

It comes up on the screen of your Mac when going through the pairing process, as shown here:
http://support.apple.com/kb/TS1569?viewlocale=en_US&locale=en_US

HT3986 Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard? Many Thanks

Hi All
Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
Many Thanks

Holy crap, this fixes the issue. At least temporarily it has. I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along. I have been fighting this since I upgraded to Mavericks a few months ago. Thank you, tbirdvet. You have no idea how much easier you just made using my iMac again.
Message was edited by: wadems

Unlock Bios For GE70 0ND

Hello
Is possible unlock Bios For GE70 0ND-226FR ?
( Cpu, ram, timming, and unlock gpu overcloking )
thx
bios version :

Quote from: frumos on 14-March-13, 22:51:40
This bios will work with GE60 0ND too?
No, this NB is using own different BIOSes compared to GE70

GE70 0ND win7 wireless problems... again.

Hey there.
I'm the one of many who decided to perform a downgrade on a GE70 0ND laptop. However, I've encountered a problem with wi-fi not working at all. Firstly I couldn't even switch it on, but after flashing my EC to win7, S-bar is working properly (a blue indicator now lights when I press the wi-fi button), though I'm not able to find any wireless networks.
My BIOS version is E1756IMS.514
EC version is 1756EMS1 4.04
I downloaded the recent Intel n135 drivers, started the diagnostics, on the first step (hardware test) it says: "Wireless hardware is not bound to transport driver."
Any suggestions?
Thanks in advance.

Try resetting EC: How to reset the EC (Embedded Controller)
If no help remove wireless driver in safemode using >>Driver Fusion<<. After reboot install latest driver.

[Solved] Disabled key for LXDE

Hi again,
I'm unhappy that I have to claim for your help again but I'm encountering some trouble installing LXDE. The problem ist discribed precisely in the internet and there are workarounds given to get things straighten out but I think, there might be some drawbacks.
One place the error is discribed is in the bugsection of this page. The bug is marked as closed over there giving the reason that it's fixed. Nevertheless I keep encountering that error. As an additional comment about closing "archlinux-keyring 20130525-2" is given. I checked that package. It is already installed on my machine.
As aforementiones ther are some workarounds. One is given by flexiondotorg who suggest to just reenable the relevant key. That might work for sure but I guess there is a reason for the key being disabled. Maybe there are some pagages, maybe malicious ones, signed using that key without authorization. That it would be advisable not to reenable that key, wouldn't it?
Now I'm left alone with two questions I'm not able to find a satisfying answer for myself. First of all I'm wondering, why the bug report is closed and marked as fixed, while I continue to get exactly the same error. Is it going to be fixed anyway or it's just me who doesn't see the point how it is fixed?
The second arising question is whether there is a way to get the LXDE package anyway making sure that the package is not manipulated using a stolen key from Mr. Wallace.
Last edited by disjunkt (2013-07-04 05:07:45)

Ok, i did my homework and got some enlightments. You can disable, revoke and delete a key and their components respectively. But each one of these mean a (slightly) different thing obviously.
If you have to void a key, for whatever reason, you'll have to delete or rather revoke the key. However there are some advantages to revoking the key. I'm not going to carry that out in detail, but you can do some reading about that stuff in The GNU Privacy Handbook. By the way, the "redundant selfsigning" ist not a redundant selfsigning, but a rovoking of the uid. That's also explained in the Privacy Handbook.
Disabling a key on the other hand is not described in the Privacy Handbook but there is a brief description in the GnuPG (2.0) manual stating that you can "Disable or enable an entire key. A disabled key can not normally be used for encryption." If i understand alright, that will be just a local setting. If you disable a key, won't be used for encryption on your machine, but it would not effect others. Disabling and enabling a key or a key component doesn't change anything with that key. A revoked key will stay revoked.
Finally I'm not 100% sure, but I think re-enabling a key shouldn't affect any security concerns. Please correct me, if I'm misled. Or if you can confirm that for sure, you'll be very welcome to do that as well. Besides that I can't think about a reason why you disable a key. Maybe someone can also point me in a direction here.

[SOLVED] Scan for wireless networks at boot

Lately I've been making extensive use of public wifi hotspots (libraries FTW), as mobile broadband is simply too unreliable to give me a persistent (and cheap) connection.
Is it possible to use some combination of netcfg and wifi-select (or similar tools) to scan for wireless networks at boot?
I've already got entries in rc.conf for my mobile dongle and automatically detecting ethernet connections, but it's pointless adding entries for whichever wireless profiles I might use as searching for these and discovering they don't exist just needlessly slows the boot process, whereas running something similar to wifi-select at boot (with a timeout so an unattended boot won't wait for me to make a selection) would avoid this.
* Obviously I could just wait until the system has booted and then bring up the interface I wanted manually, but generally I only reboot my system after updates, and I only download updates at a wifi hotspot, so I was hoping to automate something here.
Last edited by zoqaeski (2012-03-28 12:11:21)

Isn't net-auto-wireless or net-profiles with menu what you want? https://wiki.archlinux.org/index.php/ne … omatically

[SOLVED] Encryption hook doesn't prompt for key

I'm trying to dual boot an encrypted arch (64bit luks encryption without lvm) and windows 8 on uefi. Everything installs pretty smoothly until it tries to decrypt the root partition, it doesn't prompt for the passphrase. Using a g55vw laptop, there's a wiki page for it apparently which I've been trying to follow. When I search for related problems most people solve it by moving the encrypt hook around but I've found that doesn't help
(yes I run mkinitpio -p linux).
My output when grub loads arch:
:: running early hook [udev]
:: running hook [udev]
:: Triggering uevents...
:: running hook [keymap]
:: loading keymap . . . done
:: running hook [encrypt]
Waiting 10 seconds for device /dev/mapper/root ...
Waiting 10 seconds for device /dev/mapper/root ...
ERROR: device '/dev/mapper/root' not found. Skipping fsck
ERROR: Unable to find root device '/dev/mapper/root'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
/etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptsetup=/dev/sda2:root"
GRUB_DISABLE_LINUX_UUID=true
/etc/mkinitcpio.conf
MODULES=""
BINARIES=""
FILES=""
HOOKS="base udev autodetec modconf block keymap keyboard encrypt filesystems fsck"
Last edited by DakotaTheGiraffe (2014-09-29 04:31:21)

wow I tried that last install and it didn't work but it solved it this time. Thanks for your quick response

Satellite L500 - Can't find drivers for FN keys for Windows XP!

Hello.
I have found and installed all drivers I need for this laptop using Windows XP. My problem is that I can only activate Wireless on this laptop by pushin FN+F8 key, I have installed the Realtek Wireless drivers and they are installed fine, but I can't get Wireless to work because of the FN keys. When I push the FN+F8 key, a blue led should turn on next to the volume controller, but it doesn't...
I've searched for the Hotkey Utility in the Toshiba India site, I downloaded and tryed it but I get the error "This software utility does not support this system", the Common Modules gives me the same error too.
I've tryed installing other Hotkey Utility driver for another laptop, and it doesn't give me that error, but it doesn't work either... I actually leaves my laptop freezing a second, every 5 seconds... and the FN keys still don't work.
Anyone know where I can find a working Hotkey Utility for my laptop using XP?
Or maybe is there a way to activate Wireless without the FN keys? I don't need the other keys... I just want a way to activate Wireless.
Thanks for your time

>My problem is that I can only activate Wireless on this laptop by pushin FN+F8 key, I have installed the Realtek Wireless drivers and they are installed fine, but I can't get Wireless to work because of the FN keys. When I push the FN+F8 key, a blue led should turn on next to the volume controller, but it doesn't...
Did you try to enable the +WLan in device manager -> WLan card -> Properties -> Advanced+ tab ?
There are some options which control the WLan card and maybe it should be possible to enable the Wlan there.

GE70 0ND : Network Controller

Hi, here is a description of my problem:
Laptop ID: GE70 0ND-224FR
Installed Win 7 instead of the given Win 8.
Installed all drivers from product page but the "Realtek Network Controller" driver could not be installed because:
"The Realtek Network Controler was not found. If Deep Sleep Mode is enabled Please Plug the Cable."
BIOS version: E1756IMS.513
EC version: 1756EMS1 Ver5.04
Realtek Network Controller never appears in the device manager. The Bluetooth device appears in device manager only if i let the laptop turned off without the battery for some time.
I can't get any network connection (be it from cable or wifi) and Windows troubleshot says that there must be a problem with the driver (both the local network driver and wireless connection driver).
Side note: could not find the driver for the quick launch buttons of the laptop (no driver for ACPI\KB9XRADIOBTN)
Any help will be verry welcome!

Just a small funny note but i finally received a reply from MSI France support center...
Basically they are saying that they do not advise to downgrade to WIndows 7 (can it really be called a downgrade? ), that doing do generates problems they do not have solution for and that i'll just have to revert back to the original OS.
Quote from: MSI-France
Bonjour,
Malheureusement, nous ne pouvons vous offrir du support pour le moment, ceci pour la simple raison que nous ne conseillons pas ce downgrade. En fait, cette manipulation génère des problèmes dont nous n'avons pour le moment de solutions concluantes. Il va falloir revenir sur votre système d'exploitation d'origine, dans le cas contraire nous ne pourrons pas vous aider.
Nous vous remercions de votre bien aimable compréhension.
Bien cordialement,
Milland
MSI France

MSI Ge70 0nd-224Fr request old Bios

Hi all,
I have a problem with my MSI Ge70 0nd-224Fr Notebook.
I have upgraded Bios from E1756IMS.511 to E1756IMS.514 and my graphic card GTX660M dosen't work correctly .
All was good with E1756IMS.511 Bios !
So i want to rool back to E1756IMS.511 Bios.
is anyone has this bios file because MSI website doesn't have link to old bios ?
I will be very very happy is someone can help me.
Best regards,

Some games doesn't detect correctly Nvidia graphics card (I have try with 314.x 320.x nvidia driver [and with last beta 320.49] and i have selected game exe association with nvidia card but it was good with E1756IMS.511 but not with E1756IMS.513 and E1756IMS.514)
example : i have bad shadows on mafia 2 bench (but with old bios it was good)
and For example (my os is Windows 8) with Areo Glass mod from big muscle (it working with E1756IMS.511 bios but not with E1756IMS.513 and 514 ...)
So for me, E1756IMS.511 is the best bios and the most "stable".
I didn't want overclock my graphic card, i only want the most stable system (the last bios release has a very negative resut on my system )
I have read that the 514 Bios solved a bug with "incorrect detection nvidia graphic card frequency", so it was the only reason of why i have made an upgrade of my bios ...
E1756IMS.514 Fixes:
- Modify radio switch device only present in Windows 8.
- Solve the problem of abnormal password window when first boot priority is IP4/IP6.
- Solve the abnormal problem of resume from S4 after disable/enable Full Screen Logo Display.
- Solve abnormal NVIDIA GPU frequency problem.
So my result is with E1756IMS.514:
- abnormal NVIDIA detection problem
- Artefact on game
Please, give me a link to original bios E1756IMS.511 and original EC.
Thank you for advance for your help.

How to create a foreign key for the table from two different tables?

Hi All,
I have a three table like below. In the below table SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK will be having the primary key for NAME column. The same SAMPLE_CONS3_CHECK table also having the primary key for NAME column and forieign key for SAMPLE_CONS_CHECK and SAMPLE_CONS2_CHECK tables. See the below code 2
code 1:
CREATE TABLE SAMPLE_CONS_CHECK
        (NAME VARCHAR2(10),
        SERIES VARCHAR2(5)
CREATE TABLE SAMPLE_CONS2_CHECK
        (NAME VARCHAR2(5),
         MODEL NUMBER
CREATE TABLE SAMPLE_CONS3_CHECK
        (NAME VARCHAR2(5),
         MODEL_NO NUMBER
        )code 2
alter table SAMPLE_CONS_CHECK
add constraint SAMPLE_CONS_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS2_CHECK
add constraint SAMPLE_CONS2_CHECK_pk primary key (NAME)
alter table SAMPLE_CONS3_CHECK
add constraint SAMPLE_CONS3_CHECK_pk primary key (NAME)
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK1 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS_CHECK
    NAME
) ON DELETE CASCADE;
ALTER TABLE SAMPLE_CONS3_CHECK ADD
CONSTRAINT SAMPLE_CONS3_CHECK_FK2 FOREIGN KEY
     NAME
) REFERENCES SAMPLE_CONS2_CHECK
    NAME
) ON DELETE CASCADE;From the above schenario i am able to insert the data to SAMPLE_CONS3_CHECK table. But the parent data is already available in the parent table. The problem is here two different constarints from two different tables. While inserting, it is checking from both the tables whether the parent is exist or not.
How can i solve this problem? Can anyone halp me about this?
Thanks
Edited by: orasuriya on Aug 8, 2009 2:02 AM

Actually the design is completely incorrect.
What you say is
I have
'foo', 'foo series'
'foo','foo model'
'foo',666
By virtue of table3 referring to both table1 and table2.
This means you actually need to have 1 (one) table:
'foo','foo series','foo model', 666
And the 'problem' disappears.
Sybrand Bakker
Senior Oracle DBA

I have an IMAC that runs OS 10.6.7. I use Netgear for wireless. My computer keeps losing the network, so I can't use wireless.

I have an IMAC that runs OX 10.6.7. I use NEtgear for wireless. I have a laptop and Ipod that I use on the wireless. Recently, my desktop computer shows that it is searching for the wireless system (on the router). I contacted Netgear. They talked me into buying another router and their technical contract. Nothing is working. I can plug my 5200 modem directly up to my desktop , and the network is fine, but the wireless, of course, is not plugged in. When I go to connect the wireless, it doesn't work. This is not a computer program per se, nor is it a router program because sometimes it will work. It seems to me that the computer and router are not working together to hold the settings.
I have attempted to download the latest software for my computer, i.e., Imac graphics fireware. Each time I try, it says that the extensions are not valid for my computer.
Any suggestions?
Thanks, Vicki

Imac graphics fireware.
Did you mean to say firmware? You should only install firmware updates when offered to you via Software Update; other than that, whatever is offered is not appropriate for your model.
As for your Netgear router - I have a Netgear and set it up manually on their web interface setup site (the address should be in your manual). Did you call your ISP so they will recognize that there is a router involved? Sometimes my iMac also does not want to communicate with the router; however, my Macbook and printer have no problem. I solved the problem by connecting things this way:
cable from wall to modem > cable from modem to router > cable from router to iMac. The other things are wireless.

[SOLVED] GE70 0ND hotkey + Fn-key for wireless drivers

Similar Messages

Maybe you are looking for