[SOLVED] getting disconnected every 5-30 minutes

Hello,
my problem is that every 5-30 minutes i get disconnected and need to reconnect again.
I had this problem in gentoo, and opensuse 10.2. But not in ubuntu gutsy or opensuse 10.3.
i got no idea why it does this, any idea what can be wrong?
Last edited by aualin (2008-01-05 14:56:38)

I think i solved it... i'll report back later too see if i fixed it.
Last edited by aualin (2008-01-04 22:08:29)

Similar Messages

  • Internet disconnects every 10-30 minutes for about 1 minute each time

    Hello!  My internet disconnects every so often for about a minute, then reconnects.  I don't see any patterns regarding time of day or weather.  Verizon says it's not an issue on their end.  Here are my stats:
    Transceiver Statistics
    Transceiver Revision:     7.2.3.0      
    Vendor ID Code:     4      
    Line Mode:     G.DMT Mode      
    Data Path:     Interleaved      
    Transceiver Information     Downstream Path     Upstream Path
    DSL Speed (Kbits/Sec)     3360     800
    Margin (dB)     20.0     10.0
    Line Attenuation (dB)     19.5     13.0
    Transmit Power (dBm)     7.4     11.9
    Any ideas?  Thanks!
    Solved!
    Go to Solution.

    Yes, attached to the Westell 6300 is a D-Link wireless router WBR 1310. I don't have a house phone. I have a separate telephone line for the fax machine, and it has a DSL filter attached to it. I don't know what a micro-filter is.
    Thanks!

  • URGENT: WLAN disconnecting every 10-15 minutes on windows 7 laptop

    hi there
    i have 2 laptops, one runs xp home and other one runs win 7 ultimate, both machines have pretty much the same stuff on.
    the difference is that with the XP one wireless works great with the web authentication and never disconnects, with the win 7 machine instead, it disconnects me every 10-20 minutes or so, i came up with a trick that is to keep a streaming radio on the background, that way sometimes im connected also for 2-3-4 hours but looks like it times out again after an XX amount of time.
    so should i change the MTU value on the win 7 machine? that seems to be the workaround it by reading here and there....happens the very same with either firefox 3.6 and internet explorer 8.
    on the win 7 machine i installed TCP-Z driver...... > TCP-Z, Best TCP/IP Patch from http://deepxw.blogspot.com/ i tried to disable it and run some tests, but nothing changes.
    help much apperciated, please answer here or to my mail gabrio81ATgmail.com
    thanks
    gabrio

    problem fixed: https://supportforums.cisco.com/thread/2026180?stqc=true

  • PILDUSER gets locked every 2-3 minutes

    Hi,
    We are using XI 7.0 with SP09 , during post installation we atrying to login exchange profile using PISUPER   it throws error .Then we found PILDUSER gets locked.
    We have unlocked the account then we can login but it throws error message "name or password incorrect"
    Then found once again PILDUSER got locked
    PILDUSER gets locked every 2-3minutes even we do not perform any task.
    Can any one encountered this issue ? please suggest.
    - Kristene

    Hi Kristene,
    I faced the same problem I found that user may get locked If you have mentioned wrong passwords for the same user at Different places(QA,Prod).
    Check this thread
    XIAFUSER keeps getting locked
    Regards,
    Ashwin M
    Reward If helpful

  • My iphone 5 does not remember the password of my home network. Well this is ot the case with my ipad. The wifi gets disconnected every 2 minutes. Its not any problem with my wifi router as my ipad and other devices work fine. So how do i fix this problem?

    Well my iphone 5 does not remember my home network. This is not a problem with the wifi router as the ipad works absolutely fine. The wifi loses it connection in just 2 minutes. So could you please fix this problem.

    Not unless the modem is causing a problem.
    What you want to do is get it to work reliably over Ethernet first, then tackle wifi. Power off the modem. On your macbook, delete the Ethernet configuration and the Wifi configuration. Power up the modem, then connect the mac via Ethernet. Create the new Ethernet configuration and see if you can connect.

  • Connection woes - disconnects every 1-2 minutes

    Hello folks, I'm having some frustrating issues and am hoping someone may be able to help. I'll try explain it in some kind of logical order. Problem: Everyone in the house is effectively losing connection on average every one or two minutes for around 15-25 seconds each time. This is wreaking havoc with anyone trying to use VOIP, do any gaming, stream videos etc. Setup: BT Infinity running through an Openreach modem and a Home Hub 3, with ethernet to the five bedrooms in the house via an 8-port switch. Observations: I'm using a wired connection and can see that my ethernet card isn't showing any issues when the disconnects occur. The connection / duration time in the ethernet's device settings does not indicate any disconnects. Neither does the Home Hub's. The Home Hub's lights are all blue when the disconnects occur and I've been in the room to check it (not near my computer). The IP leases don't appear to be getting renewed over-frequently (which I thought could be an issue). The connection's normal (50-70Mbps down / 5-10Mbps up) in between these problems. Disconnects are frequent but don't follow a regular pattern. Attempted solutions: Running my computer in safe mode with networking. Connecting the ethernet switch to a different port on the Home Hub (although it affects wireless devices too). Power-cycling the modem and hub. Coarse language. Meditation. So... the problem appears to be something from the hub onwards towards BT's end. I still don't know if these are actual disconnects or the connection effectively dropping to near-zero bandwidth. I have Mumble (VOIP) running and it makes it pretty clear when these disconnects occur as it tells me when it's lost connection and reconnected, as does not being able to browse the internet. Thanks for reading. Any suggestions or solutions will be gladly received!
    Solved!
    Go to Solution.

    Ouch, the forums ate my formatting for that first post!
    Thanks for the reply Ray. I should mention that this is a shared house, not a family home, so I cannot always access the devices. I'm the one on the ethernet connection and I've gone into my ethernet adaptor's settings to change my IP address to a static number just below that of the DHCP range whilst leaving DHCP enabled for everyone else. After restarting my computer the connection's still dropping.
    Haven't had a chance to reset the hub yet, if that's necessary, as other people are using the connection at the moment.
    I do have the admin password for the hub but I'm under the impression a static IP address would have to be set from the devices themselves which I can't access - or can I use Home Network > Devices, check "Always use this IP address" then disable DHCP?

  • Disconnects every 5-30 minutes

    Been happening to me the last few days. I've tried to research my problem, but nothing that I've found has been able to solve on my issue. DSL light on my Westell 7500 dies every few minutes, internet goes after that. Internet light is also constantly blinking if that helps. 
    Tranciever Statistics:
    Transceiver Statistics
    Transceiver Revision
    A2pB020b3.d20h
    Vendor ID Code
    4D54
    Line Mode
    ADSL_re-adsl
    Data Path
    FAST
    Transceiver Information
    Down Stream Path
    Up Stream Path
    DSL Speed (Kbits/Sec)
    3195
    304
    Margin (dB)
    5.3
    9.5
    Line Attenuation (dB)
    11.0
    4.9
    Transmit Power (dBm)
    0.0
    11.4
    Any help would be greatly appreciated. 

    Your circuit is in poor shape. With a line like that, you should be able to get any speed you want. 7Mbps, 15Mbps, etc. You're barely holding 3Mbps which should be running at 3360kbps/864kbps sync.
    To start, please locate your NID for us and connect your modem up to the NID's test jack to see if the statistics are any better. The NID should be located in most cases, near your electrical meter or near your electrical panel. This is a demarcation for your home's wiring to connect up to Verizon's copper drop.
    See this FAQ for some more info: http://www.dslreports.com/faq/1317
    A laptop and an Extension cord is handy to have around in this case. Once you get the statistics from the modem at the NID, please post them up. We just need to see if this is a problem on your end or on Verizon's end.
    Also, if you have a landline, does your line have issues with static, humming, buzzing, or other noises?
    ========
    The first to bring me 1Gbps Fiber for $30/m wins!

  • EA4500 disconnects every 2-4 minutes

    Did anyone use EA4500 with L2TP connection? I really don't know what to do. I bought this router because I wanted to setup my home network with really high quality up-todate and efficient router. Previously I used Dlink DIR685. Everything was OK but lately my ISP increased internet speed up to 40 megabit per second and Dlink can’t establish connection at a speed higher than 20 mbit/sec. So I bought the best router – I thought so. Router appeared to be rather powerful – the connection was established at a speed ~ 34 mbit/sec, wifi broadcast occurred  to be also of high speed and long range. But the main and terrible problem is that the longest internet session for the last 10 days was about 30 minutes. And that is with "keep alive" setting activated. That is awful! My Dyn DNS service doesn’t have even enough time  to update my new IP in its DNS base. Of course that is way I can’t get external access to my ftp most of the time. I believe that its firmware ver.2.0.37 is very raw. And there is no any firmware on Linksys site so I can’t neither reinstall firmware 2.0.37 nor downgrade to 2.0.36. Hope this bug will be corrected soon. May be that is defect of this specific router? Did anyone faced something like this?

    In order to take full advantage of the speed and range that wireless 802.11N has to offer, both router and adapter must be wireless 802.11N capable. So, check the wireless computers that you have are N-capable adapters with the updated drivers.
    Launch Cisco Connect. Click on router settings and then click on 'advanced settings' and click ok.
    This will open the router's web interface. Click on the wireless tab at the top. Then click on manual. After this, Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your routers main/ basic setup page). Here is the link for determining and setting up the correct MTU size: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=fbf8e8564632422eaa8ea80bf9dcba64_386.xml&pid=80&re...
     Then check the connectivity status..

  • EA 2700 disconnecting every once in awhile. (30/60minutes)

    Heya,
    I'm having issues with a newly bought EA 2700 router, I'm getting disconnected every 30-60 minutes. (It's a brief disconnect for about 10seconds, perhaps a huge packet loss or something?)
    I've tried connecting directly to the modem and that seemed to have fixed the problem, so I think that it is a router issue...?
    Perhaps somebody here knows how to fix this. Would be greatly appreciated.
    Edit: I'm connected with a wire. Also, my download/upload/ping is 35mbps download, 35ish mbps upload, and 8ms. (I have a 35mbps connection so that's fine) But when I connect my PC to the modem directly, my MS becomes 5, and my upload jumps to 77mbps. The download stays the same... I thought that was quite strange. ;o

    Hmm alright. I've already reset it multiple times, also reverted it to factory settings twice. But I keep disconnecting every hour orso. The firmware is up to date as well. My NIC is running at 1.0 gbps, I'm not sure where I can see what the router is at however. But I assume 1gbps as well? I've tried disabling UPnP, disabling IPv6 at the network adapter. I also tried to set the router to Bridge Mode, that made my upload go up to 77mbps again and my Ping down to 5, but I disconnected every few minutes for a while, then the day after (I went to bad cause it was driving me insane) it seemed to work for a while, but then I started getting disconnected for brief moment again. So I put it back to automatic DHCP config.
    Edit: I also tried to empty the %temp% folder, that seemed to help, but not for long. (Perhaps not at all.)
    Edit2: I also replaced my network cable twice, but seeing as the issues went away when I plugged directly into the modem I figured that that couldn't be the issue either...
    Edit3: I keep remembering things that I tried to do in order to fix this, I also reinstalled my network drivers. ;-)

  • Skype Disconnected Every Few Minutes

    I upgrade my service from wireless to uverse and that includes phone, cable and internet. Since then I  noticed that when I am on a call on Skype, I get disconnected every few minutes even though I am still connected to the internet.  Didn't have this problem before.

    I've been having the same problem, and so I tried the solution suggested above. However, I still get disconnected after being away from my computer for just a few minutes. Although we have wireless and I thought that perhaps this is the reason I get disconnected, my husband can be using the internet on his computer at the exact time that I get disconnected, so I know that I'm not losing the wireless signal. Any other suggestions?
    Thanks
    Katherine

  • My ichat keeps disconnecting every 5 minutes.

    I got a new router and my internet and everything is working fine except for my iChat, which keeps disconnecting every couple of minutes. It's getting pretty annoying as it signs me off in the middle of a conversation. How do I fix it?

    Hi,
    By default most are set to the middle of the range they have
    Choose a number near one end.
    10:30 PM      Thursday; February 9, 2012
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • ICHAT disconnects every five minutes...

    My iChat disconnects every 5-10 minutes saying the connection was lost -- even though the browser still works! This only happens at my home with my wireless router.
    Everywhere else I've used iChat (on other connections) it stays connected..
    HELP!

    Hi,
    Welcome to the    Discussions
    A Browser and even the Mail app if you use it only use the internet now and then.
    For Mail this is when mail is collected or sent.
    For a Web Browser it is each time you change page (Some pages automatically refresh to keep the adverts up to date)
    You may only notice a slight pause in a browser if it is waiting for the Internet to come back.
    iChat is a truly "Always ON" app
    With any Buddy list that logs in to AIM it will instantly indicate any change in status of a Buddy (On-line, Off line, Status message Changes).
    As a result any issue with the Internet connection no matter how short will normally get the buddy list to fold (say Disconnected).
    If this Home router is Wifi try changing the channel it uses so not to get interference from other nearby devices.
    9:44 PM Thursday; February 3, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

  • 5508 WLC on 7.4MR2- Clients getting Disconnected using CWA

    We are experiencing an issue with clients getting disconnected/time out from a wlan doing CWA.  The clients are iphones.  A debug client shows the error(Unknown Policy Timeout). This particular WLAN is used for provisioning with ISE. ISE shows the user authenticated the entuire time.  At first, we though it was the user idle timeout setting on the WLAN advanced tab, but after increasing that clients still get disconnected.  The disconnect occurs around 2 minutes.  Sometimes longer around 10 minutes.  Cisco seems to think we are hitting a bug introduced in 7.3.112 and will not be fixed until 8.0.  Below are the bug details and the debug output.  Has anyone seen this?  Any possible work-arounds? Thanks.
    (Cisco Controller) >debug *apfMsConnTask_7: Mar 20 17:19:02.573: Association request from the P2P Client Process P2P Ie and Upadte CB
    *apfMsConnTask_7: Mar 20 17:19:02.765: Association request from the P2P Client Process P2P Ie and Upadte CB
    *apfReceiveTask: Mar 20 17:20:40.442: 18:af:61:bb:55:2f 10.200.21.0 RUN (20) Unknown Policy timeout
    *apfReceiveTask: Mar 20 17:20:40.442: 18:af:61:bb:55:2f 10.200.21.0 RUN (20) Pem timed out, Try to delete client in 10 secs.
    *apfReceiveTask: Mar 20 17:20:40.443: 18:af:61:bb:55:2f Scheduling deletion of Mobile Station:  (callerId: 12) in 10 seconds
    *osapiBsnTimer: Mar 20 17:20:50.443: 18:af:61:bb:55:2f apfMsExpireCallback (apf_ms.c:615) Expiring Mobile!
    *apfReceiveTask: Mar 20 17:20:50.443: 18:af:61:bb:55:2f apfMsExpireMobileStation (apf_ms.c:5835) Changing state for mobile 18:af:61:bb:55:2f on AP 54:78:1a:2f:84:50 from Associated to Disassociated
    *apfReceiveTask: Mar 20 17:20:50.443: 18:af:61:bb:55:2f Scheduling deletion of Mobile Station:  (callerId: 45) in 10 seconds
    *osapiBsnTimer: Mar 20 17:21:00.442: 18:af:61:bb:55:2f apfMsExpireCallback (apf_ms.c:615) Expiring Mobile!
    *apfReceiveTask: Mar 20 17:21:00.443: 18:af:61:bb:55:2f Sent Deauthenticate to mobile on BSSID 54:78:1a:2f:84:50 slot 1(caller apf_ms.c:5929)
    *apfReceiveTask: Mar 20 17:21:00.443: 18:af:61:bb:55:2f Setting active key cache index 8 ---> 8
    *apfReceiveTask: Mar 20 17:21:00.443: 18:af:61:bb:55:2f Deleting the PMK cache when de-authenticating the client.
    *apfReceiveTask: Mar 20 17:21:00.443: 18:af:61:bb:55:2f Global PMK Cache deletion failed.
    *apfReceiveTask: Mar 20 17:21:00.443: 18:af:61:bb:55:2f apfMsAssoStateDec
    *apfReceiveTask: Mar 20 17:21:00.443: 18:af:61:bb:55:2f apfMsExpireMobileStation (apf_ms.c:5967) Changing state for mobile 18:af:61:bb:55:2f on AP 54:78:1a:2f:84:50 from Disassociated to Idle
    https://tools.cisco.com/bugsearch/bug/CSCul43158
    Symptom:Wireless devices are randomly disconnected every 5-10 minutes with unknown policy timeout message in debug client
    Conditions:Clients using Central Web Authentication (CWA).
    Workaround:none
    More Info:

    mine is with the following. Still trying to figure out why.
    *osapiBsnTimer: Mar 17 12:58:05.949: f8:16:54:07:a8:78 apfMsExpireCallback (apf_ms.c:626) Expiring Mobile!
    *apfReceiveTask: Mar 17 12:58:05.949: f8:16:54:07:a8:78 apfMsExpireMobileStation (apf_ms.c:6655) Changing state for mobile f8:16:54:07:a8:78 on AP 00:e1:6d:b2:a6:90 from Associated to Disassociated
    *apfReceiveTask: Mar 17 12:58:05.949: f8:16:54:07:a8:78 Scheduling deletion of Mobile Station:  (callerId: 45) in 10 seconds
    *annyway, i've tried increasing the Session Timeout to 8hours and still testing it .. As my problem is not consistent, i have to monitor and see if its solved.

  • GUEST User gets disconnected on Guest Wlan on 2602 ap in Flexconnect mode

    Hey guys,
    I have configured a guest Wlan for guest users in remote site. The Ap's are in flexvonnect mode and authentication is web authentication where a lobby user generates and distributes passwords to guest. The guest devices however gets disconnected after 10-15 minutes and needs to be reauthenticated.
    I have disabled session timeout feature but still no relief.
    Any comments ???
    Thanks

    HI Sandeep,
    I think, it's a expected. client has to re-login/reauth after session timeout or deauth.
    http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008067489f.shtml
    Note: If clients are active after successful login, they will get           de-authenticated and entry can still be removed from the controller after the           session timeout period configured on that WLAN (for example,1800 seconds by           default and can be changed using this CLI command: config wlan           session-timeout ). When this           occurs, client entry is removed from the controller. If the client associates           again, it will move back in a Webauth_Reqd state.
    If clients are in Webauth_Reqd state, no matter if they are active or       idle, the clients will get de-authenticated after a web-auth required       timeout period (for example, 300 seconds and this time is non-user       configurable). All traffic from the client (allowed via Pre-Auth ACL) will be       disrupted. If the client associates again, it will move back to the       Webauth_Reqd state.
    There is an enhancement request filed esp. for your situation with Pre-auth ACL.
    CSCtj32812    DHCP Option to mitigate the problem of guest client rejoining network
    Regards
    Dont forget to rate helpful posts

  • GTalk keeps disconnecting every 5 mins

    Hi,
    I bought a new MacBook Pro running Lion and am having problem using GTalk on iChat. I configured GTalk using both Jabber and Google Talk drop down but have had the same problem.
    I keep getting disconnected every 5 mins and would need to login again. Are there any settings that I am missing?

    Hi,
    Do you have any other Accounts set up in iChat ?
    Bonjour might be easiest if you have another Mac to "Chat" with as we might be talking about Wifi Drops rather than a Server end issue.
    Have you tried creating a Second Mac User Account for testing and trying it there ?
    10:38 PM      Friday; October 14, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for